Advertisement
Advertisement
Packing List Quick Start Guide Power Cord Printer HD2000 Quick Start Guide Quick Start Guide USB Cable CD Xiamen Hanin Electronic Technology Co.,Ltd ADD: Room 305A,Angye Building,Pioneering Park, Torch High-tech Zone,Xiamen,China. TEL: +86-(0)592-5885993 FAX: +86-(0)592-5885992 WEB:www.hprt.com Front !Note: The packing materials are actually based on the order. Appearance and Components Control Panel Paper Outlet Printer Cover Power Connec�on 1.Make sure the power switch is in “ off ”. 2.Connect the power cord to power receptacle. 3.Connect the other end of power cord to the outlet. Cover Release Bu�on 1 Rear 2 USB Port Serial Port Ethernet Port Power Receptacle Power Switch 3 Inside Power Cord Control Panel Paper Out Indicator Error Indicator Switch Print head Group Display Paper Guide Serrated Knife !Note: The views above are for your reference. Ports vary by your choice. Standby Paper Out Menu Error Power Feed Return Platen Paper outlet Standby Indicator Brightness Menu Pause Power Indicator Up Feed Input Pause Backfeed Down Backfeed Print Density Paper Loading Fanfold Media 1. Turn the power on, adjust the paper guides to fit the width of paper. 2. Insert the paper into the entry slot. ※ The printer power must be switched on. 3. The paper will be inhaled into the path automa�cally. 4. Tear off the paper a�er the paper be located. External Paper Roll Loading 2. Press the printhead switch, and the print head will open automa�cally. 待机 缺纸 错误 电源 菜单 进纸 暂停 退纸 Paper Jam 1. Press the cover open bu�on and hold upwards to open the printer cover. 3. Take out the jammed paper and clean up the print head and platen, then reinstall the new paper. ">

Public link updated
The public link to your chat has been updated.
Advertisement