Ericsson | LIP-8002E | Specifications | Ericsson LIP-8002E Specifications

Ericsson LIP-8002E Specifications
IP Phone
Quick Guide
LIP-8002E/8002AE
Please read this manual carefully before operating your set.
Retain it for future reference.
LIP-8002E/2AE Quick Guide
ST
Important Safety information
To prevent the risk of harm to the user or damage to equipment, please read this
information before installing or repairing the phone.
1. Only trained and qualified service personnel should install, replace or service the phone.
2. Don’t spill liquid (ex. Water) on the phone. In case of spill, contact your service
technician for assistance to avoid fire or electric shock.
3. If you see smoke or smell something burning, unplug the power cord and the phone line.
Call your service technician for assistance.
4. Don’t use the phone during a thunderstorm. Lightning strike may result in a fire, severe
electrical or acoustic shock.
5. Don’t tug the power cord or the phone line. This may result in a fire, an electric shock or
equipment damage.
6. Ensure that children do not pull on phone cords. This may injure children or result in
equipment damage.
7. The ear-piece houses a magnetic device which may attract pins or small metal objects.
Keep handset clear of such objects and check before use.
8. Avoid placing the phone in an area that is dusty, damp or subject to vibration.
9. Choose a site that is dry and well ventilated.
10. Don’t put the heavy things on the phone.
11. Do not drop or throw the phone.
12. Static electricity discharge will damage electronic components.
13. Keep out of direct sunlight and away from heat.
14. Clean the phone with a soft, dry cloth only. Do not use volatile liquids such as petrol,
alcohol or acetone as this may cause a fire or result in discoloration or damage to
plastics. Do not clean with wax or silicon products as these may enter the equipment and
cause operation to become unreliable.
15. No user serviceable parts inside. Do not inset a screw driver or any metal objects into
the phone. This may cause electric shock or damage the equipment and will render the
warranty void.
Copyright© 2011 LG-Ericsson Co., Ltd.
All Rights Reserved
This material is copyrighted by LG-Ericsson Co., Ltd. Any unauthorized reproductions, use or
disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright
Laws. LG-Ericsson reserves the right to make changes in specifications at any time without
notice. The information furnished by LG-Ericsson in this material is believed to be accurate and
reliable, but is not warranted to be true in all cases.
1
LIP-8002E/2AE Quick Guide
ST
Regulatory information
European Union Declarations of Conformity
LG-Ericsson Co., Ltd. declare that the equipment specified in this document bearing the “ CE” mark
conforms to the European Union Radio and Telecommunications Terminal Equipment Directive(R&TTE
1999/5/EC), including
the Electromagnetic Compatibility Directive(2004/108/EC) and Low Voltage
Directive(2006/95/EC).
Copies of these Declarations of Conformity (DoCs) can be obtained by contacting your local sales
representative.
FCC/IC Interference Statement : USA / CSA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

Consult the dealer or an experienced radio/TV technician for help.
connected.

This device complies with part 15 /RSS-GEN of the FCC/IC rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference; and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The use of this device in a system operating either partially or completely outdoors may require the user
to obtain a license for the system according to the Canadian regulations.
CAUTION : Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to operate the
equipment.
2
LIP-8002E/2AE Quick Guide
ST
LIP-8002E/8002AE
The LG-Ericsson IP phone (LIP-8002E/8002AE) is Internet Protocol (IP) phones designed to
support hosted telephony services over a managed IP network.
The LIP-8002E/8002AE Phone has fixed feature buttons, flexible buttons that are configurable,
and dial pad buttons as shown in the figure below.
Fixed Feature Button Definitions
DND – Blocks all incoming calls. Toggle to activate.
Speed – Access speed dialing, speed programming.
Vol   – Adjusts volume for ringing, headset, and speakerphone; adjusts LCD brightness (in
idle state).
Trans/PGM –Initiates call transfer, or enters programming mode.
Hold / Save – Places active call on hold or saves programming information.
Speaker – Toggle to activate.
Call Back – Initiates call back request when calling a busy station; call is completed when
busy station returns to idle status.
Flexible buttons – Some are system pre-programmed for line appearance, and some are
user programmable.
Ring/MSG Indicator – Illuminates when ringing, or message waiting.
LCD Display – Phone interface for status, dialing directories, and text message information.
Hands-free Microphone – Used for hands-free speakerphone function.
3
LIP-8002E/2AE Quick Guide
ST
LIP-8002E/8002AE Keyset User Operation
The following is provided as quick reference for commonly used features/functions.
Complete instructions are included in the User Guide.
Placing a Call:
ICM Line –
• Lift handset or press SPEAKER button.
• Dial the extension number from the keypad.
CO Line –
• Lift handset or press SPEAKER button.
• Press CO/IP line, or dial access number.
• Dial desired phone number.
Using Camp-On (Call-Wait):
• When calling a busy Station, press *.
• Wait for party to answer.
(iPECS-CM/MG)
• Call a busy Statoin.
• Press [TRANS/PGM] button and dial Camp-On Register Code.
To retry a busy external number until answered:
• When placing an outgoing call to a busy party, press the REDIAL button if it has been
registered as flexible key.
• Hang-up handset; the call will be retried until the call is connected or the feature is
cancelled.
(iPECS-CM/MG)
• When placing an outgoing call to a busy party, press the CALL BACK button.
• Hang up handset; the call will be completed when busy party returns to idle state.
4
LIP-8002E/2AE Quick Guide
Delete Auto Call Number Redial (ACNR):
• Press the REDIAL button if it has been registered as Flexible key.
(iPECS-CM/MG)
• When placing an outgoing call to a busy party, press the CALL BACK button.
Answering a Call while idle:
ICM Line –
• Lift handset, or if in HF mode, just speak.
CO Line –
• Lift handset.
(iPECS-CM/MG)
• Lift handset, and press flashing Flex button (as needed).
Using Do Not Disturb (DND):
• Press the DND button (toggles ON and OFF).
Pickup a Call to another Station:
• Lift handset.
• Dial Directed Call Pick-up Code.
• Dial the intercom number of the ringing station.
Pickup a Call from another Station in your Group:
• Lift the handset.
• Dial Group Call Pickup code.
5
ST
LIP-8002E/2AE Quick Guide
ST
Conference:
A Conference flex button should be programmed.
• Place a call to first member.
•
If first member answer, press Conf flex button and place a call to second member.
•
If last member answer, press Conf flex button, twice.
* For conference more than 4 members in iPECS-LIK system, MCIM board is needed.
(iPECS-CM/MG)
• Place a call to first member.
•
If first member answer, press Conference flexible button and place a call to second
member.
* For conference more than 4 members, VPCM board is needed in iPECS-CM.
* For conference members, VOIB (VOIU) board is always needed in iPECS-MG.
Call Hold:
• Press the HOLD button while on a CO call.
• Press the CO button or Loop button to rejoin call.
Call Forward:
A Call forward flex button should be programmed.
• Lift Handset or press SPEAKER button.
• Press DND button.
• Dial the type of forward code (0-5, SBG: 0-4).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming CO Off-net
(Attendant only), 0=remote
• For Forward code 1-4, dial destination number.
• For Forward code 5, press CO/CO-Group button, and dial Speed number.
• For Forward code 0, dial password of forwarded station and enter the Forward code (1-4).
•
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer.
• Dial the destination number.
(iPECS-CM/MG)
• Press SPEAKER on and DND button.
• Dial the type of forward code (0-4).
6
LIP-8002E/2AE Quick Guide
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer , 0=Remote
• For Forward code 1-4, dial destination number and press * or the SAVE button.
• For Forward code 0, press * or the SAVE button.
• Dial forwarded station number, password and *.
• Dial the destination number.
Delete Call Forward:
• Lift Handset or press SPEAKER button.
• Press DND button.
• Dial #.
(iPECS-CM/MG)
• Press SPEAKER and DND button, if call forward is registered.
Call Transfer:
• While on an active call, press the TRANS/PGM button.
• Place call to the transfer destination.
• Remain on the line to announce the call and/or hang-up to complete the transfer.
Storing Speed Dial Numbers:
• Press the TRANS/PGM and Speed button.
• Dial Speed bin number.
• Press CO button or dial CO access code. (In case of SBG, this step don’t need)
• Dial telephone number you wish to store.
• Press the Hold button.
• Enter the name associated to the number.
• Press the Hold button; a confirmation tone will be heard.
(iPECS-CM/MG)
• Press the SPEED and TRANS/PGM button.
• Dial Speed bin number.
• Dial CO access code and telephone number you wish to store.
• Press the Hold button.
7
ST
LIP-8002E/2AE Quick Guide
ST
• Enter the name associated to the number.
• Press the Hold button; a confirmation tone will be heard.
Using Speed Dial Numbers:
• Press the Speed button.
• Dial the desired Speed dial bin number.
LIP-8002E/LIP-8002AE Installation
Note: LIP-8002E/8002AE IP-Phone can be powered by either AC adaptor or Power over
Ethernet (PoE, class 1). To use AC power, use only the LG-Ericsson Approved AC power
adaptor, which you can order separately. To use PoE, your connected LAN must support PoE.
<Important> Use either PoE or AC adaptor, not both, for power supply of your phone.
1. Plug one end of the supplied LAN cable into the LAN Ethernet port on the back of your IP
phone marked with the
symbol.
2. Plug the other end of the cable into your LAN Ethernet connection. (Do not extend the LAN
Ethernet cable to the outside of the building.)
3. (Optional) If you are connecting your PC Ethernet through the IP Phone, plug one end of the
LAN Ethernet cable into the PC Ethernet port on the back of your IP Phone marked with the
symbol.
<Important> Skip the following procedures from 5 to 6 if PoE is used for
power supply of your phone.
4. (Optional) Plug the other end of the cable into your LAN Ethernet connection.
5. (Optional) Connect the AC power adapter (not supplied) to the AC adapter jack on the back of
your IP Phone. Fasten the cord with a hook to prevent it from being disconnected.
6. (Optional) Plug the AC power adapter into the nearest AC power outlet. The phone will start
up.
7. (Optional) for the wall-mounting, sleeve of the CAT5 cable should be moved backward to
prevent it protrude.
8
LIP-8002E/2AE Quick Guide
ST
Flex Button Program
• Press the TRANS/PGM button.
• Press the flexible button to be programmed.
• Press TRANS/PGM button and User Program Code (refer to the following table).
• Press the HOLD/SAVE button.
(iPECS-CM/MG)
1) To assign Fixed or Number
• Press the TRANS/PGM button.
• Press the flexible button to be programmed.
• Press program type (1: Fixed button, 2: Number, 0: Delete).
• Choose the desired fixed button type (PTT, REDIAL, MUTE, CONFERENCE, ..) with
volume up and down button if the program type is Fixed button, or
• Enter Number to dial if the program type is Number.
• Press the HOLD/SAVE button.
2) To assign User Program Code
• Press the TRANS/PGM button
• Press the flexible button to be programmed
• Enter Program Mode Code and User Program Code (refer to the table)
• Press the HOLD/SAVE button to save.
System User Program Codes (LIK)
Code
Function
Remark
10
Enblock Mode Dialing
11
Intercom Ring
Select Ring Tone 1-8
12
CO/IP Ring
Select Ring Tone 1-8
13
Intercom Answer Mode
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
14
Call Coverage Attribute Setting
1:ON/OFF, 2:Ring Delay (0-9)
15
Station Ring Download
Ring Tone 5-8
19
Ear & Mic. Headset
21
Knock Down STA COS
22
Restore Station COS
Requires Auth Code
23
Walking COS
Requires Auth Code
30
VM Mobile Notify
31
Station Wait Retrieve
32
CLI/IP Message Wait Retrieve
9
LIP-8002E/2AE Quick Guide
Code
Function
33
Authorization Code (Password) Entry
34
DID Call Wait Button
35
Message Wait in Exec/Sec Pair
36
Send SMS Message
37
Register Mobile Ext.
38
Activate Mobile Ext.
39
Register Mobile Ext. CLI
41
Set Wake Up Time
42
Erase Wake-Up Time
51
Custom/Pre-defined Message Display
52
Register Custom Message (Message 00)
53
Create Conf. Room
54
Delete Conf. Room
55
Monitor Conf-Group
61
Headset/Speakerphone
62
Headset Ring Mode
71
LCD Display Mode
72
Version Display
73
Background Music
74
Station Name Reg.
75
Display Phone IP Address
76
Change Phone IP Address
77
Display Phone MAC IP Address
79
Display Phone Version
80
RECORD Button
81
ISDN CLIR Button
82
ISDN COLR Button
84
Account Code Button
85
LOOP Button
86
ATD Intrusion Button
87
ICM Button
88
Camp-On Button
89
Keypad Facility Button
8#
OHVO Button
91
CONF Button
94
FLASH Button
95
MUTE Button
96
MONITOR Button
97
REDIAL Button
98
FWD Button
99
PTT Button
9*
In Room Indication Button
*0
Hot Desk Login Code
**
Hot Desk Logout Code
*7
Force Fwd to Destination
ST
Remark
Input up to 12 digits
Input time, 24-hr clock
Input up to 24 characters
1:Speakerphone, 2:Headset, 3:Both
Requires VSF/External SMDI VM
Requires room number(01~10)
10
LIP-8002E/2AE Quick Guide
ST
System User Program Codes (SBG)
Code
Function
Remark
11
Intercom Answer Mode
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
12
Headset/Speakerphone mode
0:H, 1:S
13
Select Headset Ring type
1:S, 2:H, 3:Both
21
Set Wake-Up Time
Once/Permanent & Hour/Min
22
Erase Wake-Up Time
31
LCD Display Language
32
Sys version display
Domestic/English
33
Select BGM source
(0~1)
34
Station Name registration
Station Name
35
Display Phone IP Address
36
Display Phone MAC Address
37
Display Phone Version
38
Network Configuration
41
Forced Forward to Destination
42
Call Log Display
43
CLIR Service
44
COLR Service
4*
LOOP button
Button PGM only
50
CALLBACK button
Button PGM only
51
CONF button
Button PGM only
52
MUTE button
Button PGM only
53
ICM button
Button PGM only
54
REDIAL button
Button PGM only
Station Group Number
11
LIP-8002E/2AE Quick Guide
ST
System User Program Codes (iPECS-CM/MG)
Code
Function
Remark
11
Answer Mode(H/T/P)
Select ICM Signal mode, 1:HF, 2:Tone, 3:Privacy
12
Station Name Program
Input up to 12 characters
iPECS-CM:
Index(1-5) + Type(1~5, 1:Once, 2:Daily, 3:Mon~Fri,
4:Mon~Sat, 5:Date), + HHMM(24-hour clock) +
13
Set Wake Up
YYMMDD(If type is Date)
iPECS-MG:
HHMM(24-hour clock), # (repeat mode: once, repeat)
iPECS-CM:
Index(1-5)
14
Reset Wake Up
iPECS-MG:
1:ON/OFF, 2:Ring Delay (0-9)
15
Language Program
00 - 17
16
LCD Date Mode Change
DD/MM/YY or MM/DD/YY
17
LCD Time Mode Change
12 Hour/24 Hour
18
Set Back Light
Not supported
21
ICM Ring Type Program
22
CO Ring Type Program
23
Ring Download
5-8+0-9
24
Set BGM
Not Supported
31
Temporary COS Mode
Auth. Code required
32
Retrieve COS
Auth. Code required
33
Walking COS
Auth. Code required
34
Register Password
Auth. Code required
35
Call Log Protect
Auth. Code required
36
SMS Message Protect
Auth. Code required
41
Preselected MSG PGM
0-9, MSG / *: User Custom # Deactivation
42
Set User Message
43
Send SMS MESSAGE
44
Received SMS MESSAGE
51
Mobile-Ext. Enable
1-5
52
Mobile-Ext. Number PGM
1-5
53
Mobile-Ext. CLI PGM
1-5
54
Create Conference Room
55
Delete Conference Room
61
Speaker/Headset PGM
Speaker/Headset
62
Headset Ring Program
Speaker/Headset/Both
71
Register Station ICLID
72
View Station ICLID
81
View IP Address
82
View Mac Address
83
View Keyset Version
80
Network Setting
91
MPB Version Display
Not used in CM
92
View IP Address
Not used in CM
12
LIP-8002E/2AE
DKN
Funktionstaster
FORSTYR EJ – Blokerer for indkommende kald.
VOLUMEN   – Justerer lydniveauet for ringe tone, headset, og håndfri, samt
justerer display kontrast (når telefonen er ledig).
OMST/PROG – Omstillingstast. Anvendes til omstilling af kald og programmering.
HOLD/GEM – Anvendes til at parkere samtaler, samt gemme
programmeringsinformation.
MIKROFON – afbryder/tilslutter mikrofonen
HÅNDFRI – Besvarer kald uden brug af telefonrøret.
MENU – Bruges til at vælge den facilitet man ønsker at programmere.
NOTERING– Bruges også til at kalde Voice Mail funktionen.
Flex taster – Nogle taster er forud programmerede som linie-taster, mens andre kan
programmeres.
Ringe- og besked indikator – Lyser ved ringning, samt når der er en besked der
venter.
LCD Display – giver oplysninger og vejleder i brugen af telefonen..
HÅNDFRI – bruges ved håndfri samtale.
Navigationstaste – Bruges sammen med soft tasterne til at vælge og udføre
funktioner. Bruges også sammen med MENU tasten til opsætning af telefonen.
LIP-8002E/2AE
DKN
Kort brugervejledning
Dette er en kort brugervejledning. Yderligere information findes i brugervejledningen.
Foretage et opkald:
Til et lokalnummer –
 Løft røret eller tryk på HÅNDFRI tasten.
 Tast lokalnummeret på tastaturet.
Til et telefonnummer –
 Løft røret eller tryk på HÅNDFRI tasten.
 Tast 0, eller tryk på en LINIE taste.
 Tast det ønskede telefonnummer.
Benyt Banke-på ved kald til optaget lokalnummer:
 Når man hører at lokalnummeret er optaget taster man * og afventer svar.
Besvare et opkald:
Fra et lokalnummer –
 Løft røret.
 Hvis man er i håndfri kan man bare tale.
Fra en bylinie –
 Løft røret, og tryk på den blinkende lystaste.
 Mikrofon – tryk for at slå mikrofonen fra/til.
 VOLUMEN  – tryk for at justere lydniveauet.
Besvare et kald under samtale:
 Tryk på HOLD/GEM tasten.
 Tryk på Bylinietaste eller LOOP taste.
Brug af FORSTYR EJ funktionen:
 Tryk på FORSTYR EJ tasten for at slå funktionen fra/til.
Indtrække et kald der ringer på andet lokalnr.:
 Løft røret.
 Tast 7
 Tast lokalnummeret på den ringende telefon.
Indtrække et kald det ringer på et andet lok.nr. i gruppen:
 Løft røret.
 Tast 566
LIP-8002E/2AE
DKN
Sæt te samtalen på HOLD:
 Tryk på HOLD/GEM tasten under samtalen.
 Tryk på LINIE tasten for at genoptage samtalen.
Konference:
 Foretag det første opkald.
 Tryk på KONF. tasten.
 Foretag det andet opkald.
 Tryk på KONF. tasten to gange.
Viderestillinger:
 Løft røret.
 Tryk på FORSTYR EJ tasten.
 Tast koden for at vælge type af viderestilling (0-5).
1=Straks, 2=Optaget, 3=Forsinket, 4=Optaget/Forsinket, 5=Ekstern (kun
omstilling), 0=Remote
 Ved viderestillingskode 1-4, tast nummeret der skal viderestilles til.
 Ved viderestillingskode 5 (ekstern viderestilling), tast 0 efterfulgt af kortnummer.
 Ved viderestillingskode 0 (viderestilling af andet lokalnr.), tast password på det
andet lokalnummer og tast viderestillingskoden (1-4).
1=Straks, 2=Optaget, 3=Forsinket, 4=Optaget/Forsinket.
- Tast nummeret der skal viderestilles til.
Slet viderestillinger:
 Tryk på FORSTYR EJ tasten.
 Tast #.
Omstilling af kald:
 Under samtalen tastes på OMST/PROG tasten efterfulgt af nummeret der skal
omstilles til.
 Præsentér kaldet og læg røret på.
 Samtalen er nu omstillet
Brug af kalds logbog:
 Tryk på Højre side på Navigationstast for at se kaldshistorik.
 Tryk på Navigation tasten   for at se listen.
 Tryk i midten op for at ringe nummeret op.
LIP-8002E/2AE
DKN
Programmering af Flextaster




Tryk på OMST/PROG tasten.
Tryk på den Flextaste der ønskes programmeret.
Tryk på OMST/PROG tasten og tast bruger program-koden (se tabellen herunder).
Tryk på HOLD/GEM tasten.
System Bruger Program-koder
Kode
11
12
13
14
15
19
21
22
23
30
33
34
35
36
37
38
39
41
42
Funktion
Ringetone ved interne kald
Ringtone ved indkommende kald
Svar indstilling ved lokale kald.
Forsinket ringning
Flere ringetoner
Headset fra/til
Spærring af telefonen
Ophæv spærring af telefonen
Opkald fra spærret telefon
VM Mobil Notifikation
Vælg adgangskode
Direkte kald i kø
Chef/sekretær besked
Send besked
Register Mobile Extension
Aktiver Mobil Extension
Register Mobile Extension CLI
Indstil påmindelse
Slet påmindelse
Bemærk
Vælg Ringe Tone 1-8
Vælg Ring Tone 1-8
1:Håndfri 2:Ringetone, 3:Højtaler
(Type 1 og 3 = automatisk afløftning)
1:Aktiv/inaktiv 2:Forsinkelse af ringning (0-9)
Ring Tone 0-9
Spærrer for udg. bylinie kald
Kræver adgangskode
Tast eget lokalnr. samt kode
Op til 12 cifre
Tast tidspunkt. F.eks. 1630 #
#
- fortsættes på næste side -
LIP-8002E/2AE
DKN
System Bruger Program-koder (fortsat)
Kode
51
52
53
54
55
61
62
71
72
73
74
75
76
77
79
80
84
85
86
87
88
91
94
95
96
97
98
99
Funktion
Aktiver forudbestemt besked
Opret brugerdefineret besked (besked nr. 00)
Opret konference rum
Slet konference rum
Vis konference gruppe
Headset/håndfri
Headset ringe type
LCD Display Mode
Vis MFIM version
Baggrunds musik
Lokalnummer navn
Vis telefonens IP adresse
Skift telefonens IP adress
Vis telefonens MAC adresse
Vis telefon version
Optage tast
Klient konto tast
Linie tast
Indbrydningstast
Lokal tast
Banke på tast
Konference tast
R-tast
Mikrofon fra/ til tast
Håndfri tast
Genopkald
MEDFLYT tast
PTT
Bemærk
Vælg besked nr. 00-20
Max. 24 tegn
1:Håndfri, 2:Headset, 3:Begge
Skifter mellem Dansk / Engelsk
Max 12 tegn, (max 7 tegn)
Kræver VSF
Loop
Til at hente lokalkald der er på hold
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising