Pyle PLVHR75 Instruction manual
Add to my manuals2 Pages
PYLE Audio PLVHR75 is a 7-inch widescreen TFT/LCD video monitor with a headrest shroud and stand. It is suitable for any kind of car seat and can be easily installed without damaging the seats. The length of the headrest bracket can be adjusted to fit different size seats.
The monitor has a resolution of 480xRGBx234 and supports both NTSC and PAL systems. It has a power consumption of less than 9W and operates on a DC 12V power source. The monitor has a composition video signal input and an earphone jack. It also has a built-in speaker.
advertisement
Attentions:
1. When connect the electric power wires, you should make clear about the positive and negative electrode ( the red one is positive and the black is negative). If you wrongly connected the fuse in the filter box will be broken protectively. Please replace the fuse in same parameter.
2. Because the LCD screen is the main component It should be paid attention to be damp-proof.
3. The device must be installed firmly to prevent falling of device that will possibly cause injury and device-broken.
4. The connecting-point of direct current (12V) should connect on the Main line of storage battery as possible as it can , for keeping this device in normal operation and be away from the large voltage drop influence.
5. There is high voltage cluster in this machine, if you are the professional person, should never to take part the machine if malfunction and contact the dealer in time.
Accessories
1 x bracket
1 x remote control
2 x connection wire
1 x headrest shroud
1 x instruction manual
PLHR77
PLHR77
Instruction Manual
7" Widescreen TFT/LCD Video Monitor w/Headrest Shroud and Stand
Thank you for purchasing the TFT LCD color monitor. To enjoy the features of this device and to ensure years of trouble-free operation, please read this manual carefully and follow the instructions.
Front Panel
PYLE CAR VIDEO
1 2 3 4 5 6 7 8 9 10
1. AV input
2. Earphone jack
3. Pilot lamp
4. V1/V2 switch
5. Mode
6. Activation of menu indicator
7. Negative adjustment
8. Positive adjustment
9. Power ON/OFF
10. Remote sensor
Remote control
V1/V2 conversion
Analog variable decrease
Switch for mode
Power ON/OFF
Analog variable increase
Menu button
Specification
Screen Size:
Resolution:
System:
Power source:
Power consumption:
Video Input:
Operating Temperature:
Storage Temperature:
Headrest bracket
PL HR 77
7 inch
480xRGBx234
NTSC/PAL
DC 12V
<9W
Composition video signal
0°C ~ 60°C
-20°C ~ 80°C
Suitable for any kinds of car seats. Easy and conveniently installation without damage to the seats. Length can be adjusted(as Picture).
Installation Diagram
(Yellow) Video 1 input
(Red) Audio right input
(White) Audio left input
(Black) Grounding
(Red) Battery +12V
(Yellow) Video 2 input
AUTO VIDEO ACCESSORIES
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project