Wiring Diagrams
ArmorBlock WeldBlock 2-Port Ethernet
Self-configurable with QuickConnect
Catalog Numbers 1732E-16CFGM12QCWR, 1732E-16CFGM12P5QCWR
Parts List
Your package contains one 1732E ArmorBlock™ WeldBlock module and these
pinout guide wiring instructions.
For complete installation instructions, refer to the Module Publication Number
table and visit http://www.rockwellautomation.com/literature/.
Module Publication Number
Module
Publication Number
1732E ArmorBlock 2-Port Ethernet Modules with QuickConnect
1732E-IN010
WARNING: HOT SURFACE. RISK OF BURN.
ATTENTION: Two sets of mounting holes are used to mount the module
directly to a panel or machine. Mounting holes accommodate #8 (M4) pan
head screws. The torque specification is 1.13 Nm (10 lb-in.).
I/O Connectors
Micro-style 5-Pin Selectable Point Connector
1
(View into connector)
Pin 1 Sensor source voltage
Pin 2 Input B or Output B
Pin 3 Return
Pin 4 Input A or Output A
Pin 5 PE
2
5
4
3
44807
2 ArmorBlock WeldBlock 2-Port Ethernet Self-configurable with QuickConnect
EtherNet/IP Connector
D-Code Micro Network Female Connector
5
1
4
2
3
45793
(View into connector 1)
Pin 1 M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_TxPin 4 M12_RxPin 5 Connector shell
shield GND
(View into connector 2)
Pin 1 M12_Rx+
Pin 2 M12_Tx+
Pin 3 M12_RxPin 4 M12_TxPin 5 Connector shell
shield GND
Auxiliary Power Connector
Mini-style 4-Pin Receptacles
Male Input
Female Output
4
2
3
1
(View into receptacle)
Pin 1 Output power+
Pin 2 Sensor/MDL power+
Pin 3 Sensor/MDL powerPin 4 Output power-
2
4
1
3
45677
44809
Mini-style 5-Pin Receptacles
Male Input
Female Output
(View into receptacle)
Pin 1 Output powerPin 2 Sensor/MDL powerPin 3 Protective Earth
Pin 4 Sensor/MDL power+
Pin 5 Output power+
5
1
2
4
3
46199
TIP
5
1
2
4
3
46200
The ground for both module power and output power are shared.
ATTENTION: This equipment is considered Group 1, Class A industrial
equipment according to IEC/CISPR 11. Without appropriate precautions,
there may be difficulties with electromagnetic compatibility in residential
and other environments due to conducted and radiated disturbance.
Publication 1732E-WD005C-EN-P - May 2013
ArmorBlock WeldBlock 2-Port Ethernet Self-configurable with QuickConnect 3
Specifications
Environmental Specifications
Attribute
Value
Temperature, operating
IEC60068-2-1 (Test Ad, Operating Cold),
IEC60068-2-2, (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20...60 °C (-4…140 °F)
Temperature, ambient, max
60 °C (140 °F)
Voltage, operating
12…30V DC
Output current, per port
0.5 A
Enclosure type rating
Meets IP65/66/67/69K (when marked), and Type 4X Indoor
Use Only, with receptacle dust caps or cable termination
Certifications
Certification (when
product is marked)(1)
Value
c-UR-us
UL Recognized Industrial Control Equipment, certified for US and
Canada. See UL File E322657.
CE
European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
EtherNet/IP
ODVA conformance tested to Ethernet/IP specifications.
KC
Korean Registration of Broadcasting and Communications
Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1)
See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for
Declaration of Conformity, Certificates, and other certification details.
Publication 1732E-WD005C-EN-P - May 2013
Rockwell Automation Support
Rockwell Automation provides technical information on the Web to assist you in using
its products. At http://www.rockwellautomation.com/support/, you can find technical
manuals, a knowledge base of FAQs, technical and application notes, sample code and
links to software service packs, and a MySupport feature that you can customize to
make the best use of these tools.
For an additional level of technical phone support for installation, configuration, and
troubleshooting, we offer TechConnect support programs. For more information,
contact your local distributor or Rockwell Automation representative, or visit
http://www.rockwellautomation.com/support/.
Installation Assistance
If you experience a problem within the first 24 hours of installation, please review the
information that's contained in this manual. You can also contact a special Customer
Support number for initial help in getting your product up and running.
United States
1.440.646.3434
Monday – Friday, 8 a.m. – 5 p.m. EST
Outside United States
Please contact your local Rockwell Automation representative for any
technical support issues.
New Product Satisfaction Return
Rockwell Automation tests all of its products to ensure that they are fully operational
when shipped from the manufacturing facility. However, if your product is not
functioning and needs to be returned, follow these procedures.
United States
Contact your distributor. You must provide a Customer Support case number
(see phone number above to obtain one) to your distributor in order to
complete the return process.
Outside United States
Please contact your local Rockwell Automation representative for the return
procedure.
Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 1732E-WD005C-EN-P - May 2013
PN-205442
Supersedes Publication 1732E-WD005B-EN-P - December 2011 Copyright © 2013 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.
">