Jabra CLEAR
Jabra CLEAR
ra
b
a
J
USER MANUAL
CONTENTS
ABOUT YOUR JABRA CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WHAT YOUR HEADSET DOES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ENGLISH
THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CHARGE YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . 5
PAIRING IT WITH YOUR PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
WEARING STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HOW TO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
USING JABRA CLEAR WITH TWO MOBILE PHONES . . . . . . . . . . . . . . 9
TROUBLESHOOTING & FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
NEED MORE HELP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TAKING CARE OF YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
JABRA CLEAR
1
ABOUT YOUR JABRA CLEAR
ENGLISH
THANK YOU
Thank you for purchasing the Jabra CLEAR Bluetooth® wireless
technology headset. We hope you enjoy it! This instruction manual
will get you started and ready to make the most of your headset.
A Answer/end button
B On/off button
CStatusDisplayTM With battery indicator and Bluetooth®
connection indicator
D Charging socket
E Volume up/volume down
F Jabra Comfort EargelTM
GEarhook
B
A
F
C
E
G
D
JABRA CLEAR
2
WHAT YOUR HEADSET DOES
- Answer calls
- End calls
- Reject calls*
- Voice dialling*
ENGLISH
Your Jabra CLEAR lets you do all this:
- Last number redialling*
- Call waiting*
- Put call on hold*
-Mute
-Multiuse™ - being connected to two Bluetooth® devices at the
same time
- Enjoy HD voice quality**
- Listen to music
Specifications
- Talk time 6 hours
- Standby time 8 days
- Bluetooth® specification version 3.0 with EDR and eSCO
- Weight 10 gram
- Operating range up to 10 meters (approximately 33 feet)
-Supported Bluetooth® profiles: HFP, HSP
- Internal rechargeable battery charged by wall charger
-Always see your battery and connection status on the
Jabra StatusDisplay™
- Digital sound enhancement via DSP technology
- Noise reduction on transmitted and received audio
- Noise dependent volume control*
- Automatic volume adjustment on receive audio
- Acoustic shock protection
JABRA CLEAR
* Phone dependent
** Network and phone dependant
3
- e-SCO for enhanced audio quality
GETTING STARTED
Follow these three steps before using your headset:
ENGLISH
- 128 bit encryption
1. Charge your headset
2.Activate Bluetooth® on your mobile phone (refer to the manual for
your Mobile phone)
3. Pair your headset to your mobile phone
The Jabra CLEAR is easy to operate. The answer/end button on
the headset performs different functions depending on how long
you press it.
Instruction
Duration of press
Tap
Press briefly
Double Tap
2 quickly repeated taps
Press
Approx: 1 second
Press and hold
Approx: 5 seconds
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged
the battery indicator turns solid green for five minutes and is
then turned off.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
JABRA CLEAR
4
-Slide the on/off button towards the symbol “O” to turn the
headset off.
ENGLISH
TURNING YOUR HEADSET ON AND OFF
-Slide the on/off button towards the symbol “I” to turn the
headset ON. When you do so both indicators will flash on the
Jabra StatusDisplay™.
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra CLEAR for the first time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth® status indication on the StatusDisplay™ is
flashing.
2 Set your Bluetooth® phone to ‘discover’ the CLEAR
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to discover new devices. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*
3 Your phone will find the Jabra CLEAR
- Your phone will find the headset under name “Jabra CLEAR”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone. You may be
asked to confirm with a passkey or PIN. Then use 0000
(4 zeros). Your phone will confirm when pairing is complete
and the Bluetooth® status indication on the StatusDisplay™ will
shift from flashing light to steady light and the headset voice
guidance will say “connected”.
* Phone dependent
JABRA CLEAR
5
DEVICES FOUND
Jabra CLEAR
Jabra CLEAR
Passkey:
****
SELECT
OK
HANDSFREE
Jabra CLEAR
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
ENGLISH
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
SELECT
If you wish to use the headset with a different phone, or if the
pairing process was interrupted, you can manually set the headset
to pairing mode.
Make sure the headset is on. Press and hold the answer/end button
for approximately 5 seconds until the Bluetooth® icon turns from
a steady light to a flashing light. Then repeat steps 2 and 3 in the
above pairing guide.
Connecting with your phone
Pairing is only needed the first time a headset and phone are
used together. When the headset and phone have been paired
once, they will automatically connect when the headset is on and
Bluetooth® is activated on the phone. The headset can be used
when it is “connected” to the phone. If the devices are paired, but
do not immediately connect, tap the answer/end button. When
your headset is connected the Bluetooth® connection icon in the
STATUSDISPLAY™ WILL BE CONSTANT ON FOR 3 SECONDS and
the headset voice guidance will say “connected”.
WEARING STYLE
The Jabra CLEAR is ready to be worn with or without the ear hook.
The ear hook can be removed and the headset can be used with
the Ultimate-fit Eargels™.
The Ultimate-fit Eargels™ can be used for both left and right wearing.
The Ultimate-fit Eargels™ come in two different styles to fit any ear.
You can also twist the eargel slightly to optimize the fit and comfort.
For optimal performance, wear the Jabra CLEAR and your mobile
phone on the same side of your body or within line of sight. You will
get better performance when there are no obstructions between
your headset and your mobile phone.
JABRA CLEAR
6
HOW TO
- Tap the answer/end button on your headset to answer a call.
End a call
- Tap the answer/end button to end an active call.
Reject a call*
ENGLISH
Answer a call
- Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
will hear a busy signal.
Make a call
-When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra CLEAR’s answer/end button to transfer the call to the
headset.
Activate voice dialling*
-Press the answer/end button to activate the voice-dialing
function in the mobile phone. Please consult your phone user
manual for more info about using this feature.
Redial last number*
- Double tap the answer/end button when the headset is on and
not used.
Adjust sound and volume*
- Tap the volume up or down to adjust the volume.
Mute/un-mute
- To mute, press both volume up and down at the same time.
A low beep alert plays during a muted call.
- To un-mute, tap either of the volume buttons.
* Phone dependent
JABRA CLEAR
7
- This lets you put a call on hold during a conversation and
answer a waiting call.
- Press the answer/end button once to put the active call on
hold and answer the waiting call.
- Press the answer/end button to switch between the two calls.
ENGLISH
Call waiting and placing a call on hold*
- Tap the answer/end button to end the active conversation.
HOW THE STATUSDISPLAY™ WORKS
Bluetooth®
Indicator
Indicates if your headset is connected to your
phone
- Solid light means headset is connected to your
phone
- Flashing light means headset is in ‘pairing mode’
and ready to be connected to a new phone
Battery
Indicator
Indicates battery level and if headset is turned ON
- Green light indicates that the headset has more
than 30 minutes of talk time remaining
- Red light indicates that the headset has less
than 30 minutes of talk time remaining
To save battery the Jabra StatusDisplay™ is turned off after 3 seconds.
Get an instant status from the Jabra StatusDisplay™ by a tap on any
button on the headset when you are not on a call.
HOW THE VOICE GUIDANCE WORKS
When your headset has established a connection to your phone (or
other Bluetooth® device) the voice guidance will say “connected”.
When your headset has less than 30 minutes talk time remaining
the voice guidance will say “low battery”.
When double tapping the MFB button on your headset to redial,
the voice guidance will say “redialling”.
* Phone dependent
JABRA CLEAR
8
In order to use the headset with two mobile phone please make
sure you have ”paired” the Jabra CLEAR with both phones. See the
section “PAIRING IT WITH YOUR PHONE” for instructions.
ENGLISH
USING JABRA CLEAR WITH TWO MOBILE PHONES
Jabra CLEAR is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time.
This will give you the freedom of having only one headset to
operate both your mobile phones.
Once you have “paired” your headset with two phones simply
make sure your headset is on, and that Bluetooth® is enabled on
the phones and the headset will then automatically connect to
both phones.
Please note that Last Number Redial will dial the number from
the last outgoing call, independent of the mobile phone, and the
Voice Dialling function will only work on the last paired mobile
phone.
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 10 meters (33 feet) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset.
- Ensure that the headset is paired to a device that is playing.
- Make sure your phone is connected to the headset by tapping
the Answer/End button.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions.
I want to reset the headset
It is possible to reset the headset. Turn the headset ON. Then
’Press and hold’ the volume down and answer/end buttons at
JABRA CLEAR
9
- Turn the headset OFF . The next time you power on, the headset
will go into pairing mode as the first time you powered your
new CLEAR on.
Will the Jabra CLEAR work with other Bluetooth® equipment?
ENGLISH
the same time for approx. 5 seconds until the battery icon and
Bluetooth® icon flash 5 times simultaneously - then the pairing
list is reset.
- The Jabra CLEAR is designed to work with Bluetooth® mobile
phones. It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1.1 or higher and support a
headset and hands-free profile.
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the hands-free profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra CLEAR with 2 mobile
phones.
NEED MORE HELP?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail: Deutsch English Español Français Italiano Nederlands Polska Scandinavian Россия Australia
support.de@jabra.com
support.uk@jabra.com
support.es@jabra.com
support.fr@jabra.com
support.it@jabra.com
support.nl@jabra.com
support.pl@jabra.com
support.no@jabra.com
support.ru@jabra.com
support.au@jabra.com
JABRA CLEAR
10
3. Phone: Belgique/Belgie Danmark
Deutschland Suomi France Italia Luxembourg Nederland Norge Österreich Portugal
Россия Sverige Die Schweiz
España United Kingdom Australia
China
Japan
Singapore
United State
Canada
International support.cn@jabra.com
support.jp@jabra.com
support.sg@jabra.com
Information: info@jabra.com
+32 28080766
+45 69918794
+49 30896778991
+45 35256540
+33 182880251
+39 0662207674
+45 35256540
+31 208080962
+47 22577785
+43 720880558
+45 35256540
+7 916 246 69 00
+46 852507012
+41 435002460
+34 911875539
+44 2033180070
1-800-738-521
800-858-0789
03-3242-8722
800-101-2329
1 (800) 327-2230
1 (800) 489-4199
+45 35256540
JABRA CLEAR
ENGLISH
China
Japan
Singapore
11
- Always store the Jabra CLEAR with the power off and safely
protected.
- Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may affect operation. High temperatures may
also degrade performance.
- Do not expose the Jabra CLEAR to rain or other liquids.
ENGLISH
TAKING CARE OF YOUR HEADSET
GLOSSARY
1 Bluetooth® is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth® is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth® devices either. Get more information at
www.bluetooth.com.
2 Bluetooth® profiles are the different ways that Bluetooth®
devices communicate with other devices. Bluetooth® phones
support the headset profile, the hands-free profile or both. In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3Pairing creates a unique and encrypted link between two
Bluetooth® devices and lets them communicate with each other.
Bluetooth® devices will not work if the devices have not been paired.
4 Passkey or PIN is a code that you enter on your Bluetooth® enabled
device (e.g. a mobile phone) to pair it with your Jabra CLEAR.
This makes your device and the Jabra CLEAR recognize each
other and automatically work together.
5 Standby mode is when the Jabra CLEAR is passively waiting
for a call. When you ‘end’ a call on your mobile phone, the
headset goes into standby mode.
Dispose of the product according
to local standards and regulations.
www.jabra.com/weee
JABRA CLEAR
12
© 2012 GN Netcom US, Inc. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein are
the property of their respective owners. The Bluetooth® word mark
and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by GN Netcom A/S is under license. (Design and specifications
subject to change without notice).
© 2012 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein are
the property of their respective owners. The Bluetooth® word mark
and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by GN Netcom A/S is under license. (Design and specifications
subject to change without notice).
MADE IN CHINA
TYPE: OTE4
www.jabra.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising