User Manual

HEADBANGER10

SLI MHW HB10

 

 

Maintenance

1. Avoid contact with high humidity or direct contact with moisture.

2. Using the product for extended run cycles without pause can shorten lifespan

3. Cleaning the lens and fan assemblies and blowing out dust from the product is mandatory maintenance and will extend lifespan.

4. Never use petroleum-based cleaning agents or solvenst on the product, this will damage the product permanently

Statement

All products are checked carefully before packing and shipping. Should you find the product to be damaged when opening the box, contact your dealer. Any misuse of the product due to neglect of the guidelines in this manual will void your warranty. The dealer or manufacturer can never be held responsible should this occur.

Technical details can be changed without notice

Attention

1. Never use the product in high humidity, in direct or indirect contact with moisture or in locations with high temperatures. Failure to do so will void your warranty.

2. Always place the product on a solid and even surface. When installed with the hanging bracket, always make sure to use an approved mounting clamp and check the mounting points for wear or damage.

3. A trained professional should perform all repairs and maintenance. Never open the product without approval from your dealer.

4. Always use a stable power source within operating specifications.

5. Allow the light to cool down for 20 minutes before re-using.

Product Introduction

• Power Supply AC90-230V, 50Hz-60Hz

• Power consumption: 80W

• 7pcs*10W RGBW LED

• DMX-Control-channels: 7 or 12, user selectable

• Color: RGBW Color-mixing

• Strobe: Flash rate: 0-10Hz

• Dimmer: 0-100%

• Maximum PAN-movement: 540 o

• Maximum TILT-movement: 270 o

• Master/Slave function

DMX Channel Summary – 7 Channels Mode

CHANNEL

1

VALUE FUNCTION

0 Stop

1~255 Adjust Pan

2

3

4

5

6

7

0 Stop

1~255 Adjust Tilt

0~10 Close

11~255 Dimmer

0 Close

1~255 Red

0 Close

1~255 Green

0 Close

1~255 Blue

0 Close

1~255 White

 

DMX Channel Summary – 12 Channels Mode

CHANNEL VALUE FUNCTION

1

0 Stop

1~255 Adjust Pan

0 Stop

2

3

4

1~255 Adjust Pan fine

0 Stop

1~255 Adjust Tilt

0 Stop

1~255 Adjust Tilt fine

5

0~10 Close

11~255 Dimmer

0 Close

6

7

8

9

1~255 Red

0 Close

1~255 Green

0 Close

1~255 Blue

0 Close

1~255 White

0~9 Close

10

11

12

10~255 Color Macros

0~9 No strobe

10~255 Adjust strobe from slow to fast

0~127 Stop sound active mode

128~255 Activate sound active mode

 

Display Control Instruction

ADDR

CHND

SLND

SOUN

AUTO

STBY

PAN

TILT

LED

DMX Adress

Channel Mode

Master/Slave

Sound Sensitivity

Auto Mode

Standby

PAN Reverse

TILT Reverse

LED On/Off

DISP

TEST

HOUR

RSET

Display On/Off

Self Test

Show Total Runtime

A001-A512

7CH/12CH

NAST/SL1/SL2

0-100

NO/YES

NO/YES

NO/YES

NO/YES

ON/OFF

ON/OFF

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS.

• If, after you have followed the instructions outlined above, this device fails to function, please contact your dealer. Under no circumstances should this device be opened. Leave all servicing to qualified personnel.

•Electrical appliances must never be used in conditions of high humidity or heat. To prevent any risk of fire or electric shock, never spill or splash liquids on this device. Should this happen, unplug the power cable from the mains outlet and switch off the mixer immediately.

MARKING & CONFORMITY

1. The CE mark on this product means it conforms to the EMC Directive (2004/108/CE), CE marking

Directive (93/68/EEC) and Low Voltage Directive (2006/95/EC).

2. The «Crossed-out Wheeled Bin» is to draw your attention to the WEEE (Waste Electric &

Electronic Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.

3. «RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the use of certain hazardous substances in electrical and electronic equipments, such as: Mercury,

Lead, Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated

Diphenyl Ethers (PBDE).