Xerox 7760 Phaser User guide

Add to my manuals
158 Pages

advertisement

Xerox 7760 Phaser User guide | Manualzz

Phaser

®

7760

c o l o r l a s e r p r i n t e r

User Guide

Guide d’utilisation

Guida dell'utente

Benutzerhandbuch

Guía del usuario

Guia do Usuário

Gebruikershandleiding

Användarhandbok

www.xerox.com/office/support

Copyright © 2006 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United

States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation.

Copyright protection claimed includes all forms of matters of copyrighted materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.

XEROX

®

, CentreWare

®

, Made For Each Other

®

, Phaser

®

, PhaserCal

®

, PhaserMatch

®

, PhaserSMART

®

, PrintingScout

,

TekColor

, and Walk-Up

® are trademarks of Xerox Corporation in the United States and/or other countries.

Acrobat

®

, Adobe

®

Reader

®

, Adobe Type Manager

®

, ATM

, Illustrator

®

, PageMaker

®

, Photoshop

®

, PostScript

®

, Adobe

Brilliant

®

Screens, Adobe Garamond

®

, Adobe Jenson

, Birch

®

, Carta

®

, IntelliSelect

®

, Mythos

®

, Quake

®

, and Tekton

®

are trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Apple

®

, AppleTalk

®

, Bonjour

, EtherTalk

®

, LaserWriter

®

, LocalTalk

®

, Macintosh

®

, Mac OS

®

, TrueType

®

, Apple Chancery

®

,

Chicago

®

, Geneva

®

, Monaco

®

, New York

®

, and QuickDraw

®

are trademarks of Apple Computer, Inc. in the United States and/or other countries.

Marigold

and Oxford

are trademarks of Alpha Omega Typography.

Avery

is a trademark of Avery Dennison Corporation.

HP-GL

®

, HP-UX

®

, and PCL

® are trademarks of Hewlett-Packard Corporation in the United States and/or other countries.

Hoefler Text was designed by the Hoefler Type Foundry.

IBM

®

and AIX

®

are trademarks of International Business Machines Corporation in the United States and/or other countries.

ITC Avant Guard Gothic

®

, ITC Bookman

®

, ITC Lubalin Graph

®

, ITC Mona Lisa

®

, ITC Symbol

®

, ITC Zapf Chancery

®

, and

ITC Zapf Dingbats

®

are trademarks of International Typeface Corporation.

Bernhard Modern

, Clarendon

, Coronet

, Helvetica

, New Century Schoolbook

, Optima

, Palatino

, Stempel

Garamond

, Times

, and Univers

are trademarks of Linotype-Hell AG and/or its subsidiaries.

Macromedia

®

and Flash

®

are trademarks of Macromedia, Inc.

Windows

®

, Windows NT

®

, Windows Server

, and Wingdings

®

are trademarks of Microsoft Corporation in the United States and/or other countries.

Albertus

, Arial

, Gill Sans

, Joanna

, and Times New Roman

are trademarks of Monotype Imaging Inc.

Antique Olive

®

is a trademark of M. Olive.

Eurostile

is a trademark of Nebiolo.

Novell

®

, NetWare

®

, NDPS

®

, NDS

®

, Novell Directory Services

®

, IPX

, and Novell Distributed Print Services

™ are trademarks of Novell, Incorporated in the United States and/or other countries.

Sun

SM

, Sun Microsystems

, and Solaris

®

are trademarks of Sun Microsystems, Incorporated in the United States and/or other countries.

SWOP

® is a trademark of SWOP, Inc.

UNIX

®

is a trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.

As an E NERGY S TAR

®

partner, Xerox Corporation has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. The E NERGY S TAR name and logo are registered U.S. marks.

PANTONE

®

Colors generated may not match PANTONE-identified standards. Consult current PANTONE Publications for accurate color. PANTONE

®

and other Pantone, Inc. trademarks are the property of Pantone, Inc. © Pantone, Inc., 2000.

Contents

1 Printer Features

Parts of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Front-Right View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Rear-Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Front-Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Internal Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Printer Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Available Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Control Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Control Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Information Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Sample Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Xerox Support Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

2 Network Basics

Overview of Network Setup and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Setting Up the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Choosing a Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Connecting via USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Connecting via Ethernet (Recommended) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Configuring the Network Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

TCP/IP and IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Automatically Setting the Printer’s IP Address (Windows) . . . . . . . . . . . . . . . . . . . . 2-5

Dynamic Methods of Setting the Printer’s IP Address . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Manually Setting the Printer’s IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Installing the Printer Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Available Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Windows 98 SE or Later and Windows 2000 or Later . . . . . . . . . . . . . . . . . . . . . . . 2-10

Macintosh OS 9.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Macintosh OS X, Version 10.2 and Higher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Phaser® 7760 Color Laser Printer i

Contents

3 Printing Basics

Overview of Basic Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Supported Paper and Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Paper Usage Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Paper That Can Damage Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Paper Storage Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Supported Paper Sizes and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Loading Paper in Tray 1 (MPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Using Manual Feed in Tray 1 (MPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Loading Paper in Trays 2–5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Selecting Printing Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Selecting Printing Preferences (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Selecting Options for an Individual Job (Windows). . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Selecting Options for an Individual Job (Macintosh) . . . . . . . . . . . . . . . . . . . . . . . . 3-27

Printing on Both Sides of the Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

Automatic 2-Sided Printing Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

Binding Edge Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

Selecting 2-Sided Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

Printing on Specialty Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33

Printing Transparencies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33

Printing Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36

Printing Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38

Printing Glossy Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40

Printing Custom Size Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45

Choosing Output Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48

Output Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48

Offsetting Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-49

Stapling Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50

Using the Hole Puncher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-51

Phaser® 7760 Color Laser Printer ii

Contents

4 Print Quality

Controlling the Quality of Your Prints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Selecting a Print-Quality Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Adjusting Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Solving Print-Quality Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Light Lines or Streaks in One Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Dark Lines, Smudges, or Streaks Through All Colors . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Repeating Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Colors Align Incorrectly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Incomplete Fusing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Image Is Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue . . . . . . . . . . . . . . . . . . 4-12

Poor Transparency Print Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

All Colors Are Too Light or Too Dark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Grays Are Not Neutral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Colors Vary Between Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

Colors Do Not Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

Printed Colors Do Not Match Monitor Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

PANTONE Colors Do Not Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Color Settings Not Applied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Print Area Is Not Centered on the Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

5 Maintenance

Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Cleaning the Outside of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Cleaning the Laser Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Adding Staples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Adding Staples to the Regular Stapler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Adding Staples to the Booklet Stapler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Emptying the Punch Waste Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Ordering Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Routine Maintenance Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

When to Order Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Recycling Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Moving and Repacking the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Precautions for Moving the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Moving the Printer Within the Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Preparing the Printer for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Phaser® 7760 Color Laser Printer iii

Contents

6 Troubleshooting

Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Preventing Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Jams in the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Jams in the Finisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23

Control Panel Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23

PrintingScout Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23

PhaserSMART Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24

Web Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24

A User Safety

Index

Phaser® 7760 Color Laser Printer iv

Printer Features

This chapter includes:

Parts of the Printer on page 1-2

Printer Configurations on page 1-6

Control Panel on page 1-9

More Information on page 1-13

Phaser® 7760 Color Laser Printer

1-1

Parts of the Printer

This section includes:

Front-Right View on page 1-2

Rear-Left View on page 1-3

Internal Components on page 1-4

Options on page 1-5

Front-Right View

1

2

1.

Tray 1 (Multi-Purpose Tray)

2.

Front door

3.

Tray 2

4.

Top output tray

5.

Right door

6.

Power switch

3

7760-147

4

5

6

Parts of the Printer

Phaser® 7760 Color Laser Printer

1-2

Rear-Left View

1

2

1.

USB connection

2.

Ethernet 10/100/1000 Base-Tx connection

3.

Circuit breaker

4.

Power cord connection

3

4

Front-Left View

3

2

1

4

1.

Door A

2.

Door D

3.

Tray 1 (MPT)

4.

Door B

7760-099

7760-155

Parts of the Printer

Phaser® 7760 Color Laser Printer

1-3

Internal Components

1

2

1.

Transfer Roller

2.

Fuser

3.

Accumulator Belt Cleaner

4.

Imaging Units

5.

Waste Cartridge

6.

Toner Cartridges

7.

Accumulator Belt

5

Parts of the Printer

6 7

4

3

7760-100

Phaser® 7760 Color Laser Printer

1-4

Options

1

2

1.

Trays 3-5, (2500-Sheet High-Capacity Feeder)

2.

Finisher Door (Finisher with booklet maker)

3.

Finisher Upper Output Tray

4.

Finisher Stacker Output Tray

5.

Cover 5 (Finisher Door 5)

6.

Finisher Booklet Output Tray

10

7

8

9

7.

Door B

8.

Door C

9.

Trays 3-5 (1500-Sheet High-Capacity Feeder)

10.

Horizontal transport (top output tray with finisher installed)

11.

Punch Waste Box

12.

Staple unit

13.

Saddle staple unit

14.

Booklet drawer

7760-156

11

12

13

14

5

6

3

4

7760-098

Parts of the Printer

Phaser® 7760 Color Laser Printer

1-5

Printer Configurations

This section includes:

Standard Features on page 1-6

Available Configurations on page 1-7

Options on page 1-7

Standard Features

Maximum print speed:

■ 35 ppm (pages per minute) color

■ 45 ppm monochrome

Connections:

■ USB

■ Ethernet 10/100/1000 Base-Tx

Internal Hard Drive which enables the following job types:

■ Personal prints

■ Personal saved prints

Proof prints

Saved prints

Secure prints

Printing with saved jobs

Memory: 512 MB

Fonts:

■ PostScript

■ PCL

Trays:

■ Tray 1 (Multi-Purpose Tray)

■ Tray 2

Custom sizes including banners

Automatic 2-sided printing

Maximum resolution (dpi): 1200 dpi x 1200 dpi

Standard, enhanced, and photo print-quality modes

PhaserCal Software

Printer Configurations

Phaser® 7760 Color Laser Printer

1-6

Available Configurations

The Phaser 7760 Color Laser Printer is available in three configurations.

Printer Configurations

Features

1500-Sheet High-Capacity Feeder

(Trays 3, 4, and 5)

2500-Sheet High-Capacity Feeder

(Trays 3, 4, and 5)

Finisher

PhaserMatch Software

7760DN

Optional

Printer Configurations

7760GX

Standard

7760DX

No

Optional

Optional

Optional

No

Optional

Standard

Standard

Optional

Standard

Options

The following options can be purchased separately for the Phaser 7760 Color Laser Printer.

Print the Configuration page to see which options are installed on your printer. To print the

Configuration page, see

Information Pages on page 1-11.

Additional Trays

Tray 1 (MPT) and Tray 2 are standard on all configurations. The following additional feeders are available:

1500-Sheet High-Capacity Feeder, with three full width 500-sheet trays

(Trays 3, 4, and 5)

2500-Sheet High-Capacity Feeder, with one full width tray (Tray 3) and two Letter-/

A4-size trays (Trays 4 and 5)

Finishers

Two types of finishers are available. Both provide stapling and hole punching for a variety of paper and media.

Advanced Finisher

Professional Finisher: Can also fold and saddle staple output to create booklets.

These finishers are available with either a 3-hole punch or a 2-/4-hole punch.

Note: If you add a finisher to the Phaser 7760DN configuration, you must also add a

1500-Sheet High-Capacity Feeder or a 2500-Sheet High-Capacity Feeder.

Memory

All configurations have two memory slots supporting 512 MB DDR RAM modules. The maximum memory is 1 GB.

Phaser® 7760 Color Laser Printer

1-7

Printer Configurations

PhaserCal and PhaserMatch Software

PhaserMatch Color Management and PhaserCal Color Calibration software provide instrument-based color calibration tools. These applications use spectrophotometer measurements to achieve optimum calibration and can be used to create custom TekColor

Corrections for your Phaser 7760 printer.

PhaserCal software is a subset of PhaserMatch and comes standard on all Phaser 7760 Color

Laser Printer configurations. PhaserMatch software is standard on the Phaser 7760GX and

Phaser 7760DX configurations.

To order PhaserMatch software for the Phaser 7760DN, go to www.xerox.com/office/

7760supplies.

See also:

PhaserMatch and PhaserCal 4.0 User Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

1-8

Control Panel

Control Panel

This section includes:

Control Panel Features on page 1-9

Control Panel Layout on page 1-10

Menu Map on page 1-11

Information Pages on page 1-11

Sample Pages on page 1-11

Control Panel Features

The control panel:

■ Displays the printer’s operating status (for example, errors, and warnings.

Prompts you to load paper, order and replace supplies, and clear jams.

Enables you to access tools and information pages to help resolve problems.

Enables you to change printer and network settings.

Enables you to access supply status.

Printing, Ready to Print ), printer

Phaser® 7760 Color Laser Printer

1-9

Control Panel

Control Panel Layout

3 5 7 8

1 2 4 6

7760-161

1.

Status Indicator LED:

Green: Printer is ready to print.

Orange: Warning condition, printer continues to print.

Red: Startup sequence or error condition.

Blinking: Printer is busy or warming up.

2.

Graphic display indicates status messages and menus.

3.

Cancel button

Cancels the current print job.

4.

Back button

Returns to the previous menu item.

5.

Up Arrow button

Scrolls upward through the menus.

6.

Down Arrow button

Scrolls downward through the menus.

7.

OK button

Accepts the setting selected.

8.

Help (?) button

Displays a help message with information about the printer, such as printer status, error messages, and maintenance information.

Phaser® 7760 Color Laser Printer

1-10

Control Panel

Information Pages

Your printer comes with a set of information pages to help you obtain the best results from your printer. Access these pages from the control panel. Print the Menu Map to see where these information pages are located in the control panel menu structure.

Note: This print icon appears before the titles of information pages that can be printed. When the page is highlighted on the control panel, press the

OK button to print that page.

For example, to print the Configuration page or the Supplies Usage page to view current information about your printer, do the following:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Information Pages , and then press the OK button.

3.

Select Configuration Page or Supplies Usage Page , and then press the OK button to print.

Note: You can also print information pages from CentreWare Internet Services (IS) and from the printer driver.

Menu Map

The Menu Map helps you navigate the control panel menus. To print the Menu Map:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Menu Map , and then press the OK button to print.

Note: Print the Menu Map to see other information pages available for printing.

Sample Pages

Your printer comes with a set of sample pages that demonstrate different printer functions.

To print sample pages:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Sample Pages , and then press the OK button.

3.

Select the desired sample page, and then press the OK button to print.

Phaser® 7760 Color Laser Printer

1-11

Control Panel

Color Sampler Pages

The color sampler pages are designed to help you select colors to use in your print jobs. Each sampler page lists either the percentages of cyan, magenta, yellow, and black that are used, or the amounts (from 0 to 255) of red, green, and blue that are used.

Note: Before you print the sampler pages, select the appropriate PostScript Setup settings for the default print-quality mode and color correction from the Printer Setup menu on the control panel.

To print the color sampler pages:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Sample Pages , and then press the OK button.

3.

Select either CMYK Sampler Pages or RGB Sampler Pages , and then press the

OK button to print.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

1-12

More Information

More Information

This section includes:

Resources on page 1-13

Xerox Support Centre on page 1-14

Resources

Obtain information regarding your printer and its capabilities from the following sources.

Information

Setup Guide*

Quick Reference Guide*

User Guide (PDF)*

Advanced Features Guide (PDF)

Quick Start Tutorials

Video Tutorials

Recommended Media List

Printer Management Tools

Knowledge Base

PhaserSMART

Technical Support

Information about menu selection or error messages on control panel

Information pages

* Also available on the Support website.

Source

Packaged with printer

Packaged with printer

Software and Documentation CD-ROM www.xerox.com/office/7760support www.xerox.com/office/7760support www.xerox.com/office/7760support www.xerox.com/paper www.xerox.com/office/pmtools www.xerox.com/office/7760support www.phaserSMART.com

www.xerox.com/office/7760support

Control panel Help (?) button

Control panel menu

Phaser® 7760 Color Laser Printer

1-13

More Information

Xerox Support Centre

The Xerox Support Centre is a utility that is installed during printer driver installation. It is available for printers with Windows 2000 and later or Mac OS X, version 10.2 and higher.

The Xerox Support Centre appears on the desktop for Windows printers or is placed in the

Mac OS X dock. It provides a central location for accessing the following information:

User manuals and video tutorials

Solutions to troubleshooting problems

Printer and supplies status

Supplies ordering and recycling

Answers to frequently asked questions

Default printer driver settings (Windows only)

To start the Xerox Support Centre utility:

1.

Select one of the following options:

Windows: Double-click the Xerox Support Centre icon on your desktop.

Macintosh: Click the Xerox Support Centre icon in the dock.

2.

Select your printer from the Select Printer drop-down list.

See also:

Using the Xerox Support Centre tutorial at www.xerox.com/office/7760support

Note: If your printer is connected via USB, Xerox Support Centre features requiring a network connection are unavailable.

Phaser® 7760 Color Laser Printer

1-14

Network Basics

This chapter includes:

Overview of Network Setup and Configuration

Setting Up the Network on page 2-3

Configuring the Network Address on page 2-5

Installing the Printer Drivers on page 2-9

on page 2-2

This chapter provides basic information about setting up and connecting to your printer.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

2-1

Overview of Network Setup and Configuration

Overview of Network Setup and Configuration

To set up and configure the network:

1.

Turn on the printer and the computer.

2.

Connect the printer to the network using the recommended hardware and cables.

3.

Print the Configuration page and keep if for referencing network settings.

4.

Configure the printer’s network address, which is required to identify the printer on the network.

Windows operating systems: Run the Installer on the Software and Documentation

CD-ROM to automatically set the printer’s IP address if the printer is connected to an established TCP/IP network. You can also manually set the printer’s IP address on the control panel.

Macintosh systems: Manually set the printer’s network address (for TCP/IP) on the control panel.

5.

Install the driver software on the computer from the Software and Documentation

CD-ROM. For information on driver installation, see the section in this chapter for the specific operating system you are using.

Note: If the Software and Documentation CD-ROM is not available, you can download the latest driver from www.xerox.com/office/drivers .

For more detailed networking information, see the Advanced Features Guide at www.xerox.com/office/7760support.

Phaser® 7760 Color Laser Printer

2-2

Setting Up the Network

Setting Up the Network

This section includes:

Choosing a Connection Method on page 2-3

Configuring the Network Address on page 2-5

Connecting via Ethernet (Recommended) on page 2-4

Choosing a Connection Method

Connect the printer via Ethernet or USB. A USB connection is a direct connection and not used for networking. An Ethernet connection is used for networking. Hardware and cabling requirements vary for the different connection methods. Cabling and hardware are generally not included with your printer and must be purchased separately.

Connecting via USB

If you are connecting to one computer, a USB connection offers fast data speeds. However, a

USB connection is not as fast as an Ethernet connection. To use USB, PC users must have

Microsoft Windows 98 SE, Windows 2000, or Windows XP. Macintosh users must use

Mac OS 9.x and higher.

USB Connection

A USB connection requires a standard A/B USB cable. This cable is not included with your printer and must be purchased separately. Verify that you are using the correct USB cable for your connection.

1.

Connect one end of the USB cable to the printer and turn it on.

2.

Connect the other end of the USB cable to the computer.

See also:

Installing the Printer Drivers on page 2-9

Phaser® 7760 Color Laser Printer

2-3

Setting Up the Network

Connecting via Ethernet (Recommended)

Ethernet can be used for one or more computers. It supports many printers and systems on an

Ethernet network. An Ethernet connection is recommended because it is faster than a USB connection. It also allows you direct access to CentreWare Internet Services (IS).

CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. For complete information about CentreWare IS, click the Help button in CentreWare IS to go to the

CentreWare IS Online Help.

Network Connection

Depending on your particular setup, the following hardware and cabling is required for

Ethernet.

If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required.

If you are connecting to one or more computers with a hub, an Ethernet hub and two twisted-pair (category 5/RJ-45) cables are required.

If you are connecting to one or more computers using a cable or DSL router, a cable or

DSL router and two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for each device.)

If you are connecting to one or more computers with a hub, connect the computer to the hub with one cable, and then connect the printer to the hub with the second cable. Connect to any port on the hub except the uplink port.

TCP/IP and EtherTalk are the most common protocols used with Ethernet. To print using a

TCP/IP protocol, each computer and printer requires a unique IP address.

See also:

Configuring the Network Address on page 2-5

Installing the Printer Drivers on page 2-9

Phaser® 7760 Color Laser Printer

2-4

Configuring the Network Address

Configuring the Network Address

This section includes:

TCP/IP and IP Addresses on page 2-5

Automatically Setting the Printer’s IP Address (Windows) on page 2-5

Dynamic Methods of Setting the Printer’s IP Address on page 2-6

Manually Setting the Printer’s IP Address on page 2-8

TCP/IP and IP Addresses

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the printer directly to your computer using Ethernet, follow the procedure for automatically setting the printer’s

Internet Protocol (IP) address.

PCs and printers primarily use TCP/IP protocols to communicate over an Ethernet network.

With TCP/IP protocols, each printer and computer must have a unique IP address. It is important that the addresses are similar, but not the same; only the last digit needs to be different. For example, your printer can have the address 192.168.1.2 while your computer has the address 192.168.1.3. Another device can have the address 192.168.1.4.

Generally, Macintosh computers use either TCP/IP or the EtherTalk protocol to talk to a networked printer. For Mac OS X systems, TCP/IP is preferred. Unlike TCP/IP, however,

EtherTalk does not require printers or computers to have IP addresses.

Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server automatically programs an IP address into every PC and printer on the network that is configured to use DHCP. A DHCP server is built into most cable and DSL routers. If you use a cable or DSL router, see your router’s documentation for information on IP addressing.

See also:

Knowledge Base at www.xerox.com/office/7760support

Automatically Setting the Printer’s IP Address (Windows)

If the printer is connected to a small established TCP/IP network without a DHCP server, use the installer on the Software and Documentation CD-ROM to detect or assign an IP address to your printer. For further instructions, insert the Software and Documentation CD-ROM into your computer’s CD-ROM drive. After the Installer launches, follow the prompts for installation.

Note: For the automatic Installer to function, the printer must be connected to an established

TCP/IP network.

Phaser® 7760 Color Laser Printer

2-5

Configuring the Network Address

Dynamic Methods of Setting the Printer’s IP Address

Set the printer’s IP address using any of the following methods. DHCP is enabled by default on all Phaser printers.

DHCP

CentreWare IS

AutoIP

Information Required for Manual IP Addressing

Information

Internet Protocol (IP) address of the printer

Network Mask

Default Router/Gateway address

Comments

Format is xxx.xxx.xxx.xxx, where xxx represents a decimal number from 0–255.

If you are unsure, leave this blank; the printer chooses an appropriate mask.

Router address is required to communicate with the host device from anywhere other than the local network segment.

Enabling DHCP on the Printer

Verify that the printer DHCP protocol is enabled by setting the control panel or by using

CentreWare IS. DHCP is enabled by default on all Phaser printers.

Note: To determine the printer’s IP address, select Printer Identification on the control panel.

See also:

Control Panel Features on page 1-9

Changing or Modifying the IP Address Using CentreWare IS

CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. For complete information about CentreWare IS, click the Help button in CentreWare IS to go to the

CentreWare IS Online Help.

After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties.

4.

Select the Protocols folder on the left sidebar.

5.

Select TCP/IP.

6.

Enter or modify the settings, and then click Save Changes at the bottom of the page.

Phaser® 7760 Color Laser Printer

2-6

Configuring the Network Address

Using Host Names with the Domain Name Service (DNS)

The printer supports DNS through an embedded DNS resolver. The DNS resolver protocol communicates with one or more DNS servers to resolve the IP address for a given host name or the host name for a given IP address.

To use an IP host name for the printer, the system administrator must configure one or more

DNS servers and a local DNS domain name space database. To set up the printer for DNS, supply a maximum of two DNS name server IP addresses.

Dynamic Domain Name Service (DDNS)

The printer supports Dynamic DNS through DHCP. You must have DHCP enabled on the printer for DDNS to function. Your network’s DHCP server must also support Dynamic DNS updates through option 12 or option 81 support. See your network administrator for details.

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Select Properties.

4.

Select the Protocols folder on the left sidebar.

5.

Select TCP/IP.

6.

In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to ON.

7.

To enable DDNS, enter the following DDNS/WINS settings information:

DDNS: Set to ON.

Release Host Name: Set to NO.

DDNS/WINS Name: Use the default name provided by Xerox or enter another name.

Primary WINS Server (optional)

Secondary WINS Server (optional)

8.

Click Save Changes when you are finished entering the settings.

Phaser® 7760 Color Laser Printer

2-7

Configuring the Network Address

Manually Setting the Printer’s IP Address

Note: Verify that your computer has a properly configured IP address for your network.

Contact your network administrator for more information.

If you are on a network without a DNS server, or in an environment where the network administrator assigns printer IP addresses, you can use this method to manually set the IP address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are in a small office with a single PC and use a dialup modem connection, you can manually set the IP address.

1.

On the control panel, select Printer Setup , and then press the OK button.

2.

Select Connection Setup , and then press the OK button.

3.

Select Network Setup , and then press the OK button.

4.

Select TCP/IP Setup , and then press the OK button.

5.

Select DHCP/BOOTP , and then press the OK button to select Off .

6.

Select TCP/IP Address , and then press the OK button.

7.

Enter the printer’s IP address, and then press the OK button.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

2-8

Installing the Printer Drivers

Installing the Printer Drivers

This section includes:

Available Drivers on page 2-9

Windows 98 SE or Later and Windows 2000 or Later on page 2-10

Macintosh OS 9.x on page 2-11

Macintosh OS X, Version 10.2 and Higher on page 2-12

Available Drivers

To access special printing options, use a Xerox printer driver.

Xerox provides drivers for a variety of page description languages and operating systems. The following printer drivers are available:

Printer Driver

Windows PostScript Driver

PCL Driver

Xerox Walk-Up Printing Driver

(Windows)

Macintosh OS 9.x Driver

Mac OS X (version 10.2 and higher) Driver

UNIX Driver

Source*

CD-ROM and

Web

Web only

Web only

CD-ROM and

Web

CD-ROM and

Web

Web only

Description

The PostScript driver is recommended to take full advantage of your system's custom features and genuine Adobe® PostScript®.

(Default printer driver)

The Printer Command Language driver can be used for applications requiring PCL.

Note: For Windows 2000 and Windows XP only.

This driver enables printing from a PC to any

Xerox PostScript-enabled printer. This is especially helpful for mobile professionals who travel to multiple locations and need to print to different printers.

This driver enables printing from a Mac OS

9.x operating system.

This driver enables printing from a Mac OS X

(version 10.2 and higher) operating system.

This driver enables printing from a UNIX operating system.

* Go to www.xerox.com/office/drivers for the latest printer drivers.

Phaser® 7760 Color Laser Printer

2-9

Installing the Printer Drivers

Windows 98 SE or Later and Windows 2000 or Later

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch, do the following: a.

Click Start, and then click Run.

b.

In the Run window, type: <CD drive>:\INSTALL.EXE.

2.

Select your desired language from the list.

3.

Select Install Printer Driver.

4.

Select the installation method you want to use, and then follow the onscreen instructions.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Knowledge Base at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

2-10

Installing the Printer Drivers

Macintosh OS 9.x

USB

A USB-connected printer does not display in the Chooser. To create a desktop USB printer:

1.

Insert the Software and Documentation CD-ROM into the CD-ROM drive.

2.

Use the Desktop Printer Utility to create a desktop USB printer. The utility is located in the PhaserTools folder that is created during the software installation.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Knowledge Base at www.xerox.com/office/7760support

EtherTalk

Note: If you use EtherTalk, Macintosh computers do not require IP addresses.

Follow these steps to install the printer driver:

1.

Open the AppleTalk Control Panel.

2.

Verify that the Ethernet port is the selected network port.

3.

Double-click the installer on the Software and Documentation CD-ROM to install the printer driver.

4.

Open the Chooser, and then click the LaserWriter driver.

5.

From the right column of the Chooser, select the printer, and then click Create to create the desktop printer.

Phaser® 7760 Color Laser Printer

2-11

Installing the Printer Drivers

Macintosh OS X, Version 10.2 and Higher

Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an

LPD/LPR connection for Macintosh OS X, version 10.2 and higher.

Note: If you are using the PhaserMatch software, use the LPD/LPR connection method.

Other connection methods cause PhaserMatch color corrections to become unaccessible.

Macintosh OS X, Version 10.2 and 10.3

Bonjour (Rendezvous) Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the printer software.

2.

When installation is complete, select one of the following options:

Open the Print Center utility for Mac OS X, version 10.2.x.

Open the Printer Setup Utility for Mac OS X, version 10.3.x.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

3.

Confirm that the first drop-down menu is set to Bonjour (Rendezvous).

4.

Select the printer in the window.

5.

Select Xerox from the list of manufacturers in the lower drop-down menu.

6.

Select the appropriate printer model from the list of available devices.

7.

Click the Add button.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Knowledge Base at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

2-12

Installing the Printer Drivers

USB Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive.

Open the Print Center utility for Mac OS X, version 10.2.x.

Open the Printer Setup Utility for Mac OS X, version 10.3.x.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

2.

Click the Add button.

3.

Select USB from the drop-down menu.

4.

Select the printer in the window.

5.

Select Xerox from the manufacturers in the drop-down menu.

6.

Select the appropriate printer configuration from the list of available printers.

7.

Click the Add button.

LPD/LPR Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the printer software.

2.

Once installation is complete, select one of the following options:

Open the Print Center utility for Mac OS X, version 10.2.x.

Open the Printer Setup Utility for Mac OS X, version 10.3.x.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

3.

Click the Add button.

4.

Select one of the following options:

Mac OS X, Version 10.2: Select IP Printing from the pull-down menu. Enter the printer’s IP address in the Printer Address field. Select Xerox from the Printer

Model pull-down menu, and then select the corresponding PPD file. Click the Add button. The printer is added to the list.

Mac OS X, Version 10.3: Select IP Printing from the first pull-down menu. Select

LPD/LPR from the second pull-down menu. Enter the printer’s IP address in the

Printer Address field. Verify that the Queue Name field is blank. Select Xerox from the Printer Model pull-down menu, and then select the corresponding PPD file. Click the Add button. The printer is added to the list.

Phaser® 7760 Color Laser Printer

2-13

Installing the Printer Drivers

Macintosh OS X, Version 10.4

Bonjour Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive.

2.

Open the Printer Setup Utility.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

3.

Click the Add button.

4.

Select the Default Browser in the Printer Browser.

5.

Select the Bonjour printer in the list of available printers. If the Printer Browser:

Selects the appropriate printer from the Print Using drop-down list, go to Step 8.

Does not select the appropriate printer from the Print Using drop-down list, go to

Step 6.

6.

Select Xerox from the list of manufacturers in the lower drop-down menu.

7.

Select the appropriate printer from the list of available printers.

8.

Click the Add button.

USB Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive.

2.

Open the Printer Setup Utility.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

3.

Click the Add button.

4.

Select the Default Browser in the upper left corner of the Printer Browser.

5.

Select the USB-connected printer in the printers window. The Printer Browser selects the appropriate printer configuration in the Print Using drop-down list.

If the appropriate printer configuration is selected, proceed to Step 8.

If the appropriate printer configuration is not selected, proceed to Step 6.

6.

Select Xerox from the manufacturers in the drop-down menu.

7.

Select the appropriate printer configuration from the list of available printers.

8.

Click the Add button. The printer is displayed as an available printer in the Printer Setup

Utility.

Phaser® 7760 Color Laser Printer

2-14

Installing the Printer Drivers

LPD Connection

To install the printer driver from the Software and Documentation CD-ROM:

1.

Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the printer software.

2.

Once installation is complete, open the Printer Setup Utility.

Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the Utilities folder.

3.

Click the Add button.

4.

Select IP Printer from the upper left corner of the Printer Browser.

5.

Select LPD from the pull-down menu.

6.

Enter the printer’s IP address in the Address field.

7.

Click the Add button. The printer is added to the list.

Phaser® 7760 Color Laser Printer

2-15

Printing Basics

This chapter includes:

Overview of Basic Steps on page 3-2

Supported Paper and Media on page 3-3

Loading Paper on page 3-9

Selecting Printing Options on page 3-24

Printing on Both Sides of the Paper on page 3-30

Printing on Specialty Media on page 3-33

Choosing Output Options on page 3-48

See also:

Using paper trays video tutorials at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

3-1

Overview of Basic Steps

Overview of Basic Steps

1.

Load paper in the tray.

2.

If you are prompted by the control panel, either confirm the paper type and size or change it as required.

3.

From the software application, access the Print dialog box, and then select printing options in the printer driver.

4.

Send the job to the printer from the software application’s Print dialog box.

See also:

Loading Paper on page 3-9

Phaser® 7760 Color Laser Printer

3-2

Supported Paper and Media

Supported Paper and Media

This section includes:

Paper Usage Guidelines on page 3-3

Paper That Can Damage Your Printer on page 3-4

Paper Storage Guidelines on page 3-4

Supported Paper Sizes and Weights on page 3-5

Your printer is designed to be used with a variety of paper types. Follow the guidelines in this section to ensure the best print quality and to avoid jams.

For best results, use Xerox printing media specified for your Phaser 7760 Color Laser Printer.

They are guaranteed to produce excellent results with your printer.

For information about recommended paper and specialty media, see the Recommended Media

List at www.xerox.com/paper .

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies .

Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction

Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.

Coverage may vary outside these areas; please contact your local representative for details.

Paper Usage Guidelines

The printer trays accommodate most sizes and types of paper, transparencies, or other specialty media. Follow these guidelines when loading paper and media in the trays:

Envelopes, labels, and extra thick card stock can be printed from Tray 1 (MPT) only.

Transparencies and custom size paper can be printed from Tray 1 (MPT) and Tray 2.

Fan paper, transparencies, or other specialty media before loading in the paper tray.

Use only paper envelopes. Do not use envelopes with windows, metal clasps, or adhesives with release strips.

All envelopes should be printed single-sided only.

Do not load paper above the fill line on the inside of the paper guide.

Adjust the paper guides to fit the paper size.

If excessive jams occur, use paper or other media from a new package.

See also:

Printing on Specialty Media on page 3-33

Phaser® 7760 Color Laser Printer

3-3

Supported Paper and Media

Paper That Can Damage Your Printer

Your printer is designed to use a variety of media types for print jobs. However, some media can cause poor output quality, increased paper jams, or damage to your printer.

Unacceptable media includes:

Rough or porous media, such as inkjet paper

Plastic media

Paper that has been folded or wrinkled

Paper that has been photocopied

Paper with staples

Carbonless paper

Envelopes with windows, metal clasps, or adhesives with release strips

Padded envelopes

Non-laser glossy paper

Transparencies other than the Xerox Digital Color Clear Transparencies

Label stock that has one or more labels removed from a sheet

Media that is less than 75 g/m

2

(20 lb. Bond) or more than 255 g/m

2

(90 lb. Cover)

Embossed, coated, or pre-printed paper with heat tolerances below 210° C (322° F)

Media that melts, offsets, or discolors at temperatures less than 210° C (322° F) for

0.2 seconds.

See also:

Printing Envelopes on page 3-36

Paper Storage Guidelines

Providing good storage conditions for your paper and other media contributes to optimum print quality.

Store paper in dark, cool, relatively dry locations. Most paper items are susceptible to damage from ultraviolet (UV) and visible light. UV radiation, which is emitted by the sun and fluorescent bulbs, is particularly damaging to paper items. The intensity and length of exposure to visible light on paper items should be reduced as much as possible.

Maintain constant temperatures and relative humidity.

Avoid attics, kitchens, garages, and basements for storing paper. Inside walls are drier than outside walls where moisture can collect.

Store paper flat. Paper should be stored on pallets, cartons, shelves, or in cabinets.

Avoid having food or drinks in the area where paper is stored or handled.

Do not open sealed packages of paper until you are ready to load them into the printer.

Leave paper in the original packaging. For most commercial cut-size grades, the ream wrapper contains an inner lining that protects the paper from moisture loss or gain.

Leave the media inside the bag until you are ready to use it; reinsert unused media in the bag and reseal it for protection. Some specialty media is packaged inside resealable plastic bags.

Phaser® 7760 Color Laser Printer

3-4

Supported Paper and Media

Supported Paper Sizes and Weights

The following sections provide information about paper sizes and weights that can be used in the printer trays. For more detailed information about paper and other media, print the Paper

Tips page:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Information Pages , and then press the OK button.

3.

Select Paper Tips Page , and then press the OK button to print.

See also:

Printing on Specialty Media on page 3-33

Recommended Media List at www.xerox.com/paper

Phaser® 7760 Color Laser Printer

3-5

Supported Paper and Media

Paper Sizes and Weights for Tray 1 (MPT)

7760-169

Tray 1 (MPT)

75–255 g/m

2

(20–72 lb. Bond, 22–90 lb. Cover)

Statement

Executive

5.5 x 8.5 in.

7.25 x 10.5 in.

Letter

US Folio

8.5 x 11 in.

8.5 x 13 in.

Custom Sizes

Short Edge:

100 – 305 mm (3.95

– 12.00 in.)

Long Edge:

140 – 1200 mm (5.5

– 47.25 in.)

Legal

Tabloid

8.5 x 14 in.

11.0 x 17.0 in.

Tabloid Extra

A6

A5

A4

A3

SRA3

ISO B5

B5 JIS

B4 JIS

12.0 x 18.0 in.

105 x 148 mm

148 x 210 mm

210 x 297 mm

297 x 420 mm

320 x 450 mm

176 x 250 mm

182 x 257 mm

257 x 364 mm

Phaser® 7760 Color Laser Printer

3-6

Tray 1 (MPT)

C6

C5

C4

B5

#10 Commercial

Monarch

A7

DL

4.12 x 9.5 in.

3.87 x 7.5 in.

5.25 x 7.25 in.

110 x 220 mm

114 x 162 mm

162 x 229 mm

229 x 324 mm

176 x 250 mm

Supported Paper and Media

Phaser® 7760 Color Laser Printer

3-7

Paper Sizes and Weights for Trays 2–5

Supported Paper and Media

7760-104

Trays 2–5

75–216 g/m

2

(18–57 lb. Bond, 22–80 lb. Cover)

Statement 5.5 x 8.5 in.

Letter

US Folio

Legal

Tabloid

8.5 x 11 in.

8.5 x 13 in.

8.5 x 14 in.

11.0 x 17.0 in.

Custom Sizes (Tray 2 only)*

Short Edge:

140 – 297 mm (5.5–11.70 in.)

Long Edge:

182–432 mm (7.15–17.00 in.)

A5

A4

A3

B5 JIS

148 x 210 mm

210 x 297 mm

297 x 420 mm

182 x 257 mm

B4 JIS 257 x 364 mm

*Transparencies and custom sizes can be loaded in Tray 2 only.

Note: Only Letter-, A4-, and B5-size paper can be loaded in Trays 4 and 5 on the 2500-Sheet

High-Capacity Feeder.

Phaser® 7760 Color Laser Printer

3-8

Loading Paper

Loading Paper

This section includes:

Loading Paper in Tray 1 (MPT) on page 3-9

Using Manual Feed in Tray 1 (MPT) on page 3-16

Loading Paper in Trays 2–5 on page 3-17

Note: Most paper sizes can be loaded in the trays either long-edge feed or short-edge feed, however, printing long-edge feed is recommended to optimize the life of the printer, supplies, and print speed.

Loading Paper in Tray 1 (MPT)

Use Tray 1 (MPT) the following paper types:

Plain, Colored, Preprinted, and Prepunched paper: 75–90 g/m

2

(20–24 lb. Bond)

Heavy plain paper, letterhead: 91–105 g/m

2

(25–28 lb. Bond)

Thin card stock: 106–169 g/m

2

(50–60 lb. Cover)

Thick card stock: 170–220 g/m

2

(65–80 lb. Cover)

Extra thick card stock: 221–255 g/m

2

(81–90 lb. Cover)

Thin glossy paper: 120–169 g/m

2

(50–60 lb. Cover)

Thick glossy paper: 170–220 g/m

2

(65–80 lb. Cover)

Envelopes

Labels

Xerox Digital Color Clear Transparency

Custom size paper, including banner

See also:

Paper Sizes and Weights for Tray 1 (MPT) on page 3-6

Note: If you change the paper in Tray 1 (MPT), select the correct paper type and size on the control panel.

Phaser® 7760 Color Laser Printer

3-9

Loading Paper

Long-Edge Feed

Place Letter, A4, B5 JIS, ISO B5, Statement, Executive, and paper shorter than 305 mm

(12.0 in.) or wider than 140 mm (5.5 in.) long-edge feed (LEF).

Note: If your printer has a finisher with a booklet maker, you must load paper short-edge feed to print booklets; see

Short-Edge Feed on page 3-13.

To load paper or other media in Tray 1 (MPT):

1.

Open Tray 1 (MPT).

7760-027

2.

Load the paper or other media with the long edge entering the printer first.

■ For single-sided printing, place the side to be printed facedown, with the top of the page towards the front of the printer. Prepunched holes should enter the printer last.

7760-108

Phaser® 7760 Color Laser Printer

3-10

Loading Paper

■ For automatic 2-sided printing, place side one faceup, with the top of the page towards the front of the printer. Prepunched holes should enter the printer first.

7760-119

Caution: Do not load paper or media above the fill line indicated on the tray. Overloading the tray may cause jams.

MAX

7760-107

Phaser® 7760 Color Laser Printer

3-11

3.

Adjust the paper guides to the size of the paper.

Loading Paper

7760-049

4.

When the control panel prompts you to confirm the type and size of paper in the tray, press the OK button to use the current tray setup. If you loaded a new size or type of paper in the tray, do the following: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

Select the appropriate paper size, and then press the OK button. For some sizes that can be loaded in either direction, you need to select the size with the letters LEF

(Long-Edge Feed). If you loaded a custom paper size, select New Custom Size for the paper size and follow the prompts; see

Printing Custom Size Paper from

Tray 1 (MPT) on page 3-45 for more information.

Phaser® 7760 Color Laser Printer

3-12

Loading Paper

Short-Edge Feed

Use short-edge feed for Labels, Legal, Tabloid, Tabloid Extra, A3, A5, A6, US Folio, B4 JIS,

SRA3, and paper that is narrower than 140 mm (5.5 in.) or longer than 305 mm (12.0 in.).

Note: If your printer has a finisher with a booklet maker, you must load paper short-edge feed to print booklets.

1.

Open Tray 1 (MPT).

7760-027

2.

Load the paper or other media with the short edge against the printer.

■ For single-sided printing, place the side to be printed facedown, with the top of the page entering the printer last. Place prepunched paper with the holes toward the back of the printer.

7760-109

Phaser® 7760 Color Laser Printer

3-13

Loading Paper

■ For automatic 2-sided printing, place side one faceup, with the top of the page entering the printer last. Place prepunched paper with the holes toward the front of the printer.

X

RO

XE XEROX XEROX

7760-120

Caution: Do not load paper or media above the fill line indicated on the tray. Overloading the tray may cause jams.

MAX

7760-068

Phaser® 7760 Color Laser Printer

3-14

Loading Paper

3.

Adjust the guides to fit the paper.

7760-105

4.

When the control panel prompts you to confirm the type and size of paper in the tray, press the OK button to use the current tray setup. If you loaded a new size or type of paper in the tray, do the following: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

Select the appropriate paper size, and then press the OK button. For some sizes that can be loaded in either direction, you need to select the size with the letters SEF

(Short-Edge Feed). If you loaded a custom paper size, select New Custom Size for the paper size and follow the prompts; see

Printing Custom Size Paper from

Tray 1 (MPT) on page 3-45 for more information.

See also:

Printing on Specialty Media on page 3-33

Printing Custom Size Paper on page 3-45

Phaser® 7760 Color Laser Printer

3-15

Loading Paper

Using Manual Feed in Tray 1 (MPT)

If you are using paper, such as letterhead, and do not want others to use it by mistake, you can have the printer prompt you when it is time to load the paper for your print job.

Selecting Manual Feed Using Windows

To select manual feed using Windows 2000, Windows XP, or Windows Server 2003:

1.

In the Windows printer driver, click the Paper/Quality tab.

2.

Select Force Printing from a Specific Tray, and then select Tray 1 (MPT) from the list.

3.

Select Manual Feed, and then click OK to save the driver settings.

4.

Submit your print job.

5.

When prompted by the control panel, remove the paper from Tray 1 (MPT).

6.

Load the appropriate paper for your job into the tray.

Selecting Manual Feed Using Macintosh

To select manual feed using Macintosh:

1.

In the Print dialog box, select Paper Feed from the drop-down list.

2.

Select Manual Feed in the All pages from drop-down list.

3.

Submit your print job.

4.

When prompted by the control panel, remove the paper from Tray 1 (MPT).

5.

Load the appropriate paper for your job into the tray.

See also:

Loading Paper in Tray 1 (MPT) on page 3-9

Phaser® 7760 Color Laser Printer

3-16

Loading Paper

Loading Paper in Trays 2–5

Use Trays 2–5 for the following paper types:

Plain, Colored, Preprinted, and Prepunched paper: 75–90 g/m

2

(20–24 lb. Bond)

Heavy plain paper, letterhead: 91–105 g/m

2

(25–28 lb. Bond)

Thin card stock: 106–169 g/m

2

(50–60 lb. Cover)

Thick card stock: 170–220 g/m

2

(65–80 lb. Cover)

Thin glossy paper: 120–169 g/m

2

(50–60 lb. Cover)

Thick glossy paper: 170–220 g/m

2

(65–80 lb. Cover)

Xerox Digital Color Clear Transparency (Tray 2 Only)

Note: Custom size paper can be loaded in Tray 2 only.

See also:

Paper Sizes and Weights for Trays 2–5 on page 3-8

Printing on Specialty Media on page 3-33

Phaser® 7760 Color Laser Printer

3-17

Loading Paper

Long-Edge Feed

Use long-edge feed for all paper types and sizes, except paper that is longer than 297 mm

(11.7 in.).

Note: If your printer has a finisher with a booklet maker, you must load paper short-edge feed to print booklets; see

Short-Edge Feed on page 3-21.

To load paper or other media in Trays 2-5:

1.

Pull out the tray.

2.

Fan the paper to release sheets that are stuck together.

7760-110

7760-106

3.

Load the paper with the long edge towards the left side of the tray.

■ For single-sided printing, insert the side to be printed faceup, with the top of the paper at the front of the tray. Prepunched holes should be on the right side of the tray.

7760-059

Phaser® 7760 Color Laser Printer

3-18

Loading Paper

■ For automatic 2-sided printing, insert the side to be printed facedown, with the top of the paper at the front of the tray. Prepunched holes should be on the left side of the tray.

7760-062

Caution: Do not load paper or media above the fill line indicated on the tray. Overloading the tray may cause jams.

MAX

7760-061

4.

Adjust the guides to fit the paper.

7760-111

Phaser® 7760 Color Laser Printer

3-19

Loading Paper

5.

Push the tray completely into the printer.

7760-023

6.

When the control panel prompts you to confirm the type and size of paper in the tray, press the OK button to use the current tray setup. If you loaded a new type of paper in the tray or loaded a custom size in Tray 2, do the following: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

For Tray 2, select the paper size, and then press the OK button.

Note: If you loaded custom size paper, select New Custom Size for the paper size and follow the prompts; see

Printing Custom Size Paper from Tray 2 on page 3-46 for more

information. If Tray 2 was set for custom size paper and you loaded standard-size paper, select Auto-Sensed for the paper size; the tray guides are then used by the printer to determine the paper size in the tray.

Phaser® 7760 Color Laser Printer

3-20

Loading Paper

Short-Edge Feed

Use short-edge feed for Letter, A4, B5 JIS, and paper longer than 297 mm (11.7 in.).

Note: If your printer has a finisher with a booklet maker, you must load paper short-edge feed to print booklets.

1.

Pull out the tray.

2.

Fan the paper to release sheets that are stuck together.

7760-110

7760-106

3.

Load the paper with the long edge of the paper facing the front of the tray.

■ For single-sided printing, insert the side to be printed faceup, with the top of the paper towards the left of the tray. Prepunched holes should be at the front of the tray.

7760-116

Phaser® 7760 Color Laser Printer

3-21

Loading Paper

■ For 2-sided printing, insert the side to be printed facedown, with the top of the paper towards the right side of the tray. Prepunched holes should be towards the front of the tray.

7760-063

Caution: Do not load paper or media above the fill line indicated on the tray. Overloading the tray may cause jams.

4.

Adjust the paper guides to the size of the paper.

MAX

7760-168

7760-111

Phaser® 7760 Color Laser Printer

3-22

Loading Paper

5.

Push the tray completely into the printer.

7760-023

6.

When the control panel prompts you to confirm the type and size of paper in the tray, press the OK button to use the current tray setup. If you loaded a new type of paper in the tray or loaded a custom size in Tray 2, do the following: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

For Tray 2, select the paper size, and then press the OK button.

Note: If you loaded custom size paper, select New Custom Size for the paper size and follow the prompts; see

Printing Custom Size Paper from Tray 2 on page 3-46 for more

information. If Tray 2 was set for custom size paper and you loaded standard-size paper, select Auto-Sensed for the paper size; the tray guides are then used by the printer to determine the paper size in the tray.

See also:

Printing on Specialty Media on page 3-33

Phaser® 7760 Color Laser Printer

3-23

Selecting Printing Options

Selecting Printing Options

This section includes:

Selecting Printing Preferences (Windows) on page 3-24

Selecting Options for an Individual Job (Windows) on page 3-25

Selecting Options for an Individual Job (Macintosh) on page 3-27

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Selecting Printing Preferences (Windows)

Printer preferences control all of your print jobs, unless you override them specifically for a job. For example, if you want to use automatic 2-sided printing for most jobs, set this option in printer settings.

To select printer preferences:

1.

Select one of the following options:

Windows 98 SE, Windows 2000, Windows Server 2003: Click Start, select

Settings, and then click Printers. Go to Step 2.

Windows XP: Click Start, and then select Printers and Faxes. Go to Step 2.

2.

In the Printers folder, right-click the icon for your printer.

3.

From the pop-up menu, select Printing Preferences or Properties.

4.

Make selections on the driver tabs, and then click the OK button to save your selections.

Note: For more information about Windows printer driver options, click the Help button on the printer driver tab to view the online help.

Phaser® 7760 Color Laser Printer

3-24

Selecting Printing Options

Selecting Options for an Individual Job (Windows)

If you want to use special printing options for a particular job, change the driver settings before sending the job to the printer. For example, if you want to use Photo print-quality mode for a particular graphic, select this setting in the driver before printing that job.

1.

With the desired document or graphic open in your application, access the Print dialog box.

2.

Select the Phaser 7760 Color Laser Printer and click its Properties button to open the printer driver.

3.

Make selections from the driver tabs. See the following table for specific printing options.

Note: In Windows 2000, Windows XP, and Windows Server 2003, you can save current printing options with a distinctive name and apply them to other print jobs. Select either the Paper Quality, Output Options, or TekColor tab, and then select a Saved Setting.

Click the Help button for more information.

4.

Click the OK button to save your selections.

5.

Print the job.

See the following table for specific printing options:

Printing Options for Windows Operating Systems

Operating

System Driver Tab

Windows 2000,

Windows XP, or

Windows Server

2003

Layout tab

Paper/Quality tab

Output Options tab

TekColor tab

Printing Options

Orientation

Automatic 2-sided printing

Pages per sheet

Document size, paper type, and tray selection

Print quality

Cover pages

Saved settings

Stapling

Hole punching

Paper destination

End of job notification

Secure prints, personal prints, personal saved prints, proof prints, and saved prints

Separation pages

Saved settings

Color corrections

Black and white conversion

Color adjustments

Saved settings

Phaser® 7760 Color Laser Printer

3-25

Selecting Printing Options

Printing Options for Windows Operating Systems (Continued)

Operating

System Driver Tab

Windows 98 SE Setup tab

Output Options tab

TekColor tab

Printing Options

Paper type, size, and tray selection

Orientation

Automatic 2-sided printing

Print quality

End of job notification

Stapling

Hole punching

Secure prints, proof prints, and saved prints

Separation pages

Cover pages

Color corrections

Black & white conversion

Phaser® 7760 Color Laser Printer

3-26

Selecting Printing Options

Selecting Options for an Individual Job (Macintosh)

To select print settings for a particular job, change the driver settings before sending the job to the printer.

1.

With the document open in your application, click File, and then click Print.

2.

Select the desired printing options from the menus and drop-down lists that are displayed.

Note: In Macintosh OS X, click Save Preset on the Print menu screen to save the current printer settings. You can create multiple presets and save each with its own distinctive name and printer settings. To print jobs using specific printer settings, click the applicable saved preset in the Presets list.

3.

Click Print to print the job.

See the following table for specific printing options:

Macintosh PostScript Driver Settings

Operating System

Mac OS X, version

10.4

Driver Drop-Down Title

Copies & Pages

Layout

Paper Handling

ColorSync

Cover Page

Paper Feed

Finishing Options

Job Types

Image Quality

Printer Features

Printing Options

Copies

Pages

Pages per sheet

Layout direction

Border

2-sided printing

Reverse page order

Print (all, odd, even)

■ Color conversion

■ Cover pages

■ Paper source

Stapling

Hole punching

Paper destination

Offset collated sets

■ Secure prints, personal prints, personal saved prints, proof prints, and saved prints

Print quality

Color correction and sRGB neutral grays

Image smoothing

Paper types

Separation pages

Phaser® 7760 Color Laser Printer

3-27

Selecting Printing Options

Macintosh PostScript Driver Settings (Continued)

Operating System

Mac OS X, version

10.2 and 10.3

Driver Drop-Down Title

Copies & Pages

Layout

Mac OS 9.x

Paper Handling

ColorSync

Cover Page

Paper Feed

Finishing Options

Job Types

Image Quality

Printer Features

General

Color Matching

Cover Page

Layout

Print Quality

Job Types

Printing Options

Copies

Pages

Pages per sheet

Layout direction

Border

Two-sided printing

Reverse page order

Print (all, odd, even)

■ Color conversion

■ Cover pages

■ Paper source

Stapling

Hole punching

Paper destination

Offset collated sets

■ Secure prints, personal prints, proof prints, and saved prints

Print quality

RGB color corrections neutral grays

Image smoothing

Paper types

Separation pages

Copies

Pages

Paper source

■ Print color

■ Cover pages

Pages per sheet

Border

Two-sided printing

Print quality

Image smoothing

■ Secure prints, personal prints, proof prints, and saved prints

Phaser® 7760 Color Laser Printer

3-28

Selecting Printing Options

Macintosh PostScript Driver Settings (Continued)

Operating System Driver Drop-Down Title

Advanced Options

Finishing Options

Printing Options

Paper destination

Paper types

Offset collated sets

Separation pages

Stapling

Hole punching

Destination

Offset collated sets

Phaser® 7760 Color Laser Printer

3-29

Printing on Both Sides of the Paper

Printing on Both Sides of the Paper

This section includes:

Automatic 2-Sided Printing Guidelines on page 3-30

Binding Edge Options on page 3-31

Selecting 2-Sided Printing on page 3-31

Note: For information about manual two-sided printing, go to the Knowledge Base at www.xerox.com/office/7760support .

Automatic 2-Sided Printing Guidelines

To use the printer’s automatic 2-sided printing (duplex) feature:

The paper must have a length of 148–432 mm (5.83–17 in.).

The paper must have a weight of 75–169 g/m

2

(20–40 lb. Bond).

The paper type must be: Plain Paper, Heavy Plain Paper, Preprinted, Prepunched,

Colored Paper, Letterhead, Thin Card Stock, or Thin Glossy Paper.

The following paper and media cannot be used for 2-sided printing:

Thick and Extra Thick Card Stock

Thick Glossy Paper

Transparencies

Envelopes

Labels

Any die-cut specialty media, such as business cards

See also:

Supported Paper and Media on page 3-3

Phaser® 7760 Color Laser Printer

3-30

Printing on Both Sides of the Paper

Binding Edge Options

When you use the printer driver to select 2-sided printing, also select the binding edge, which determines how the pages turn. The actual outcome depends on the orientation (portrait or landscape) of images on the page, as displayed in the following illustrations.

Portrait Landscape

Bind on Side Edge

Flip on Long Edge

Bind on Top Edge

Flip on Short Edge

Bind on Side Edge

Flip on Short Edge

Bind on Top Edge

Flip on Long Edge

Selecting 2-Sided Printing

To perform automatic 2-sided printing:

1.

Load paper into the tray:

Tray 1 (MPT)

Long-Edge Feed: Insert side one faceup with the long edge entering the printer first and the top of the page towards the front of the printer. Prepunched holes enter the printer first.

Short-Edge Feed: Insert side one faceup with the short edge entering the printer first and the top of the page towards the left side of the printer. Prepunched holes are at the

back of the tray.

Trays 2-5

Long-Edge Feed: Insert side one facedown with the long edge towards the left side of the printer and the top of the paper at the front of the tray. Prepunched holes are towards the left side of the printer.

Short-Edge Feed: Insert side one facedown, with the short edge towards the left side of the printer and the top of the paper towards the right side of the tray. Prepunched holes should be towards the front of the tray.

2.

In the printer driver, select 2-sided printing. The location of the selection depends on your computer’s operating system.

Phaser® 7760 Color Laser Printer

3-31

Printing on Both Sides of the Paper

To select automatic 2-sided printing:

Operating System Steps

Windows 98 SE

Windows 2000,

Windows XP, or

Windows Server 2003

Mac OS 9.x

Mac OS X, version

10.2 and higher

1.

Select the Setup tab.

2.

Select Print on 2 Sides.

3.

Select or deselect Bind On Top Edge.

1.

Select the Layout tab.

2.

Select either Flip On Long Edge or Flip On Short Edge under Print

On Both Sides (Duplex).

1.

In the Print dialog box, select Layout.

2.

Select Print on Both Sides.

3.

Click the Binding icon that matches the edge to bind.

1.

In the Print dialog box, select Duplex.

2.

Select Print on Both Sides.

3.

Click the Binding icon that matches the edge to bind.

See also:

Loading Paper in Tray 1 (MPT) on page 3-9

Loading Paper in Trays 2–5 on page 3-17

Phaser® 7760 Color Laser Printer

3-32

Printing on Specialty Media

Printing on Specialty Media

This section includes:

Printing Transparencies on page 3-33

Printing Envelopes on page 3-36

Printing Labels on page 3-38

Printing Glossy Paper on page 3-40

Printing Custom Size Paper on page 3-45

Printing Transparencies

Transparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one side only.

For best results, use only Xerox Digital Color Clear Transparency Film. For more information, see the Recommended Media List at www.xerox.com/paper .

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies .

Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction

Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.

Coverage may vary outside these areas; please contact your local representative for details.

Guidelines

Remove all paper before loading transparencies in the tray.

Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than

200 transparencies in Tray 2. Overloading the tray may cause the printer to jam.

Handle transparencies by the edges using both hands to avoid fingerprints and creases, which can cause poor print quality.

After loading the transparencies in the tray, use the control panel to change the paper type to Xerox Transparency .

Phaser® 7760 Color Laser Printer

3-33

Printing Transparencies from Tray 1 (MPT)

1.

Open Tray 1 (MPT).

Printing on Specialty Media

7760-027

2.

Insert the transparencies into the tray and adjust the paper guides to match the size of the transparencies.

Place the long edge of the transparencies entering the printer first.

Do not load more than 50 transparencies.

MAX

7760-121

3.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select Xerox Transparency , and then press the OK button.

c.

Select the transparency size, and then press the OK button.

Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper to enter the printer first or SEF (Short-Edge Feed) if you loaded the short edge to enter the printer first.

4.

In the printer driver, select Transparency as the paper type and/or select Tray 1 (MPT) as the paper source.

Phaser® 7760 Color Laser Printer

3-34

Printing Transparencies from Tray 2

1.

Pull out Tray 2.

Printing on Specialty Media

7760-023

2.

Insert the transparencies into the tray and adjust the paper guides to fit the transparency size.

7760-122

Note: Do not load transparencies above the transparency fill line inside the tray.

3.

Push the tray completely into the printer.

4.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select the Xerox Transparency , and then press the OK button.

c.

Select the transparency size, and then press the OK button.

Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper along the left side of the tray or SEF (Short-Edge Feed) if you loaded the short edge along the left side of the tray.

5.

In the printer driver, select Transparency as the paper type and/or select Tray 2 as the paper source.

Phaser® 7760 Color Laser Printer

3-35

Printing on Specialty Media

Printing Envelopes

Envelopes can be printed from Tray 1 (MPT) only.

See also:

Paper Sizes and Weights for Tray 1 (MPT) on page 3-6

Guidelines

Use only paper envelopes specified in the Supported Paper Sizes and Weights table.

Successful envelope printing is highly dependent on the quality and construction of the envelopes. Use envelopes made specifically for laser printers.

It is recommended that you maintain constant temperatures and relative humidity.

Store unused envelopes in their packaging to avoid the effects of moisture and dryness which can affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing.

Avoid padded envelopes; purchase envelopes that lie flat on a surface.

Remove air bubbles from the envelopes before loading by setting a heavy book on top of the envelopes.

If wrinkling or embossing problems occur, use a different brand of envelopes made specifically for laser printers.

Caution: Never use envelopes with windows or metal clasps; they can damage the printer.

Damage caused by using unsupported envelopes is not covered under the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas, please contact your local representative for details.

Phaser® 7760 Color Laser Printer

3-36

Printing Envelopes from Tray 1 (MPT)

1.

Open Tray 1 (MPT).

Printing on Specialty Media

7760-027

2.

Insert the envelopes into Tray 1 (MPT), and adjust the paper guides to match the size of the envelopes.

Place the side to be printed facedown.

Place the flap faceup and entering the printer first.

7760-123

3.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select Envelope as the paper type, and then press the OK button.

c.

Select the appropriate envelope size, and then press the OK button.

Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper to enter the printer first or SEF (Short-Edge Feed) if you loaded the short edge to enter the printer first.

4.

In the printer driver, select Tray 1 (MPT) as the paper source and/or select Envelope as the paper type.

Phaser® 7760 Color Laser Printer

3-37

Printing on Specialty Media

Printing Labels

Labels can be printed from Tray 1 (MPT) only.

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies .

See also:

Paper Sizes and Weights for Tray 1 (MPT) on page 3-6

Guidelines

Do not use vinyl labels.

Print only on one side of the sheet of labels.

Do not use any sheet where labels are missing; it may damage the printer.

Store unused labels flat in their original packaging. Leave the sheets of labels inside the original packaging until ready to use. Return any unused sheets of labels to the original packaging and reseal it.

Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing them in extreme conditions may cause print-quality problems or cause them to jam in the printer.

Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam the printer.

Phaser® 7760 Color Laser Printer

3-38

Printing Labels from Tray 1 (MPT)

1.

Open Tray 1 (MPT).

Printing on Specialty Media

7760-027

2.

Load the labels in Tray 1 (MPT).

Insert the label sheets long-edge feed.

Place the labels sheets facedown.

Place the top of the page towards the front of the printer.

7760-124

3.

Adjust the paper guides to match the size of the sheets.

4.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select Labels as the paper type, and then press the OK button.

c.

Select the appropriate size of the label sheets with the letters LEF (Long-Edge Feed), and then press the OK button.

5.

In the printer driver, select Tray 1 (MPT) as the paper source and/or select Labels as the paper type.

Phaser® 7760 Color Laser Printer

3-39

Printing on Specialty Media

Printing Glossy Paper

Glossy paper can be printed from any tray within the following weight range:

Thin Glossy Paper: 120–169 g/m

2

(50–60 lb. Cover)

Thick Glossy Paper: 170–220 g/m

2

(65–80 lb. Cover)

Note: Glossy paper should be printed on one side only.

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies .

Guidelines

Do not open sealed packages of glossy paper until you are ready to load them into the printer.

Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to use.

Remove all other paper from the tray before loading glossy paper.

Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal.

Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to curl and jam the printer.

Phaser® 7760 Color Laser Printer

3-40

Printing Glossy Paper from Tray 1 (MPT)

1.

Open Tray 1 (MPT).

Printing on Specialty Media

7760-027

2.

Fan the glossy paper to release sheets that may be stuck together.

7760-106

Phaser® 7760 Color Laser Printer

3-41

Printing on Specialty Media

3.

Insert the glossy paper into Tray 1.

Use long-edge feed (with the long edge entering the printer first) for Letter- and

A4- size paper.

Use short-edge feed (with the short edge entering the printer first) for Tabloid,

Tabloid Extra, A3, and SRA3 paper.

For single-sided printing, place the side to be printed facedown.

For automatic 2-sided printing, place side one faceup.

MAX

7760-125

Note: Do not load glossy paper above the transparency fill line inside the tray.

Overloading the tray may cause jams.

4.

Adjust the paper guides to match the size of the paper.

5.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select Thin Glossy Paper or Thick Glossy Paper (for paper over 170 g/m

2

) as the paper type, and then press the OK button.

c.

Select the appropriate paper size, and then press the OK button.

Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper to enter the printer first or SEF (Short-Edge Feed) if you loaded the short edge to enter the printer first.

6.

In the printer driver, select the Thin Glossy Paper or Thick Glossy Paper as the paper type or Tray 1 (MPT) as the paper source.

Phaser® 7760 Color Laser Printer

3-42

Printing Glossy Paper from Trays 2-5

1.

Pull out the tray.

Printing on Specialty Media

2.

Fan the paper to release sheets that are stuck together.

7760-110

7760-106

3.

Insert glossy paper with the long edge along the left side of the tray.

For single-sided printing, place the side to be printed faceup.

For automatic 2-sided printing place side one facedown.

MA

X

7760-112

Note: Do not load glossy paper above the transparency fill line inside the tray.

Overloading the tray may cause jams.

4.

Adjust the paper guides to the size of the paper.

Phaser® 7760 Color Laser Printer

3-43

5.

Push the tray all the way back into the printer.

Printing on Specialty Media

7760-023

6.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select Thin Glossy Paper or Thick Glossy Paper (for paper over 170 g/m

2

) as the paper type, and then press the OK button.

c.

If you loaded the glossy paper in Tray 2, select the appropriate paper size, and then press the OK button.

Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) since you loaded the long edge of the paper along the left side of the tray.

7.

In the printer driver, select the Thin Glossy Paper or Thick Glossy Paper as the paper type or the appropriate tray as the paper source.

Phaser® 7760 Color Laser Printer

3-44

Printing on Specialty Media

Printing Custom Size Paper

In addition to the wide variety of standard paper sizes that you can use for printing, you can also print on custom size paper within the following dimensions.

Short Edge

Long Edge

Tray 1 (MPT)

100–305 mm (3.95–12.00 in.)

140–1200 mm (5.5–47.25 in.)

Printing Custom Size Paper from Tray 1 (MPT)

1.

Open Tray 1 (MPT).

Tray 2

140–297 mm (5.5–11.70 in.)

182–432 mm (7.15–17.00 in.)

7760-167

7760-166

Long-Edge Feed Short-Edge Feed

2.

Insert custom size paper in Tray 1 (MPT) and adjust the guides to fit the paper.

3.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

Select New Custom Size , and then press the OK button.

d.

If the measurement shown for the short edge of the paper is correct, press the

OK button. Otherwise, select Change , press the OK button, use the Up Arrow or

Down Arrow button to scroll to the correct measurement, and then press the

OK button.

e.

If the measurement shown for the long edge of the paper is correct, press the

OK button. Otherwise, select Change , press the OK button, use the Up Arrow or

Down Arrow button to scroll to the correct measurement, and then press the

OK button.

f.

If the control panel prompts you for the paper orientation, select Long-Edge Feed if you loaded the long edge of the paper to enter the printer first or select

Short-Edge Feed if you loaded the short edge to enter the printer first.

4.

In the printer driver, select Tray 1 (MPT) as the paper source.

Phaser® 7760 Color Laser Printer

3-45

Printing Custom Size Paper from Tray 2

1.

Open Tray 2.

Printing on Specialty Media

7760-164 7760-165

Long-Edge Feed Short-Edge Feed

2.

Insert custom size paper in Tray 2 and adjust the guides to fit the paper.

3.

When the control panel prompts you to confirm the type and size of paper in the tray: a.

Select Change setup , and then press the OK button.

b.

Select the appropriate paper type, and then press the OK button.

c.

Select New Custom Size , and then press the OK button.

d.

If the measurement shown for the short edge of the paper is correct, press the

OK button. Otherwise, select Change , press the OK button, use the Up Arrow or

Down Arrow button to scroll to the correct measurement, and then press the

OK button.

e.

If the measurement shown for the long edge of the paper is correct, press the

OK button. Otherwise, select Change , press the OK button, use the Up Arrow or

Down Arrow button to scroll to the correct measurement, and then press the

OK button.

f.

If the control panel prompts you for the paper orientation, select Long-Edge Feed if you loaded the long edge of the paper along the left side of the tray or select

Short-Edge Feed if you loaded the short edge along the left side of the tray.

4.

In the printer driver, select Tray 2 as the paper source.

Phaser® 7760 Color Laser Printer

3-46

Printing on Specialty Media

Turning Off Custom Size Printing for Tray 2

Note: When you have finished using custom paper in Tray 2, select Auto-Sensed as the paper size when you load the standard-size paper. The tray guides are then used by the printer to determine the paper size in the tray.

On the control panel:

1.

Select Printer Setup , and then press the OK button.

2.

Select Paper Handling Setup , and then press the OK button.

3.

Select Tray 2 Setup , and then press the OK button.

4.

Select Change , and then press the OK button.

5.

Select Auto-Sensed , and then press the OK button. The paper size is set to match the tray’s paper guides.

Phaser® 7760 Color Laser Printer

3-47

Choosing Output Options

Choosing Output Options

This section includes:

Offsetting Output on page 3-49

Stapling Output on page 3-50

Using the Hole Puncher on page 3-51

Output Trays

The printer has one output tray located on the top of the printer. If a finisher is installed the following output options are available:

Top output tray (horizontal transport)

Finisher upper output tray

Finisher stacker output tray

Finisher booklet output tray

Note: If you select stapling or hole punching in the printer driver, the output automatically goes to a finisher output tray.

Selecting an Output Tray from the Printer Driver

To select an output tray for a specific print job:

Operating System Steps

Windows 98 SE,

Windows 2000,

Windows XP,

Windows Server 2003

Mac OS 9 or

Mac OS X, version

10.2 and higher

1.

Select the Output Options tab.

2.

Select the ouput tray from the Paper Destination drop-down list.

1.

In the Print dialog box, select Finishing Options from the drop-down list.

2.

Select the output tray from the Paper Destination drop-down list.

See also:

Stapling Output on page 3-50

Using the Hole Puncher on page 3-51

Phaser® 7760 Color Laser Printer

3-48

Choosing Output Options

Offsetting Output

When you send output to the top output tray or the finisher stacker tray, the copies or jobs can be offset in the tray. Offsetting shifts the pages in the output tray for each job or each copy of a collated job.

Note: If a finisher is installed, the top output tray no longer offsets.

Selecting Offsetting from the Printer Driver

To select offsetting for a specific print job:

Operating System Steps

Windows 2000,

Windows XP,

Windows Server 2003

Mac OS 9 or

Mac OS X, version

10.2 and higher

1.

Select the Layout tab.

2.

Click the Advanced button.

3.

Set Offset Collated Sets to On.

1.

In the Print dialog box, select Finishing Options from the drop-down list.

2.

Click Offset Collated Sets to select it.

Phaser® 7760 Color Laser Printer

3-49

Choosing Output Options

Stapling Output

If your printer has a finisher, you can have the printer staple sets of up to 50 sheets of 75 g/m

2

(20 lb. Bond Paper).

If your printer has a finisher with the booklet maker, you can have the printer saddle staple and fold sets of up to 15 sheets to make a booklet. It can also fold sets of up to 5 sheets without stapling.

Use the following guidelines when stapling paper:

To be stapled, the sheets of paper must have a width between 203–297 mm (8–11.7 in.) and height between 182–432 mm (7.2–17 in.).

Extra Thick Card Stock, glossy paper, transparencies, labels, and envelopes are not stapled.

To use the booklet maker, the paper size must be Letter (short-edge feed), US Folio, Legal,

Tabloid, A4 (short-edge feed), A3, or B4 JIS.

Stapling Options

The following stapling options are available from the printer driver:

None (default): The prints are not stapled.

Front: Inserts one staple in each set of copies. (For portrait long-edge feed paper, staples the upper-left corner.)

Rear: Inserts one staple in each set of copies. (For portrait long-edge feed paper, staples the lower-left corner.)

Dual: Inserts two staples in each set of copies. (For portrait long-edge feed paper, staples the left edge.)

Quadruple: Inserts four staples in each set of copies. (For portrait long-edge feed paper, staples the left edge.)

Saddle: Inserts two staples on the center line of each set of copies. Each set is then folded along the center line and sent to the lower tray of the finisher.

Fold (No Staple): Each set of copies is folded along the center line and sent to the lower tray of the finisher.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Stapling Orientation

The sample image in the printer driver displays the location of the staples, which changes depending on the orientation of the page and the paper feed direction (long-edge feed or short-edge feed).

See also:

Loading Paper on page 3-9

Phaser® 7760 Color Laser Printer

3-50

Choosing Output Options

Selecting Stapling From the Printer Driver

To select a stapling option for a specific print job:

Operating System Steps

Windows 98 SE,

Windows 2000,

Windows XP,

Windows Server 2003

Mac OS 9 or

Mac OS X, version

10.2 and higher

1.

Select the Output Options tab.

2.

Select the stapling option from the Stapling drop-down list.

1.

In the Print dialog box, select Finishing Options from the drop-down list.

2.

Select the stapling option.

Using the Hole Puncher

If your printer has a finisher, you can have the printer punch holes in the paper after it is printed. Your finisher will have either the 3-hole or the 2-/4-hole punch options.

Note: Hole punching is not available when printing booklets.

Use the following guidelines when selecting hole punching options:

The edge of the paper to be punched must be 257 mm (10.12 in.), 267 mm (10.5 in.),

270 mm (10.63 in.), 279 (11 in.), or 297 mm (11.7 in.).

Thick Card Stock, Extra Thick Card Stock, Thick Glossy Paper, transparencies, labels, and envelopes are not punched.

If you select Quadruple for stapling and 4 Holes for hole punching, the paper is not punched.

Hole Punching Options

None (default): Holes are not punched.

2 Holes: Punches 2 holes 80 mm (3.15 in.) apart.

3 Holes: Punches 3 holes 108 mm (4.25 in.) apart.

4 Holes: Punches 4 holes 80 mm (3.15 in.) apart.

Hole Orientation

The sample image displayed in the driver shows the location of the holes, which depend on the orientation of the page and the paper feed direction (long-edge feed or short-edge feed).

Phaser® 7760 Color Laser Printer

3-51

Choosing Output Options

Selecting Hole Punching from the Printer Driver

To select a hole punching option for a specific print job:

Operating System Steps

Windows 98 SE,

Windows 2000,

Windows XP,

Windows Server 2003

Mac OS 9 or

Mac OS X, version

10.2 and higher

1.

Select the Output Options tab.

2.

Select the number of holes from the Hole Punching drop-down list.

3.

Select Finisher Output Tray from the Paper Destination drop-down list.

1.

In the Print dialog box, select Finishing Options from the drop-down list.

2.

Select the number of holes under Hole Punching.

3.

Select Finisher Output Tray from the Paper Destination drop-down list.

Phaser® 7760 Color Laser Printer

3-52

.

Print Quality

This chapter includes:

Controlling the Quality of Your Prints on page 4-2

Solving Print-Quality Problems on page 4-5

Phaser® 7760 Color Laser Printer

4-1

Controlling the Quality of Your Prints

Controlling the Quality of Your Prints

This chapter includes:

Selecting a Print-Quality Mode on page 4-2

Adjusting Color on page 4-3

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Selecting a Print-Quality Mode

The print-quality mode and TekColor correction directly control the quality of your prints. The print-quality mode and paper type directly control the print speed. You can change these settings in the printer driver or on the control panel.

Note: Driver settings override the settings selected on the control panel.

The following table describes the print-quality modes:

Print-Quality Mode

Standard

Enhanced

Photo

Type of Print Job

General-purpose mode for crisp, bright color prints at high speed.

Recommended for most office use and quick prints.

High-quality mode for fine lines and sharp text. Recommended for detailed prints.

Highest-quality mode for very smooth color shades. Recommended for printing photographs or when using graphic arts applications and press matches.

Phaser® 7760 Color Laser Printer

4-2

Controlling the Quality of Your Prints

To select the print-quality mode in a supported driver:

Operating System Steps

Windows 98 SE

Windows 2000,

Windows XP, or

Windows Server 2003

Mac OS 9.x

1.

Select the Setup tab.

2.

Select a print-quality mode.

1.

Select the Paper/Quality tab.

2.

Select a print-quality mode.

Mac OS X, version

10.2 and higher

1.

In the Print dialog box, select General.

2.

Select Print Quality from the drop-down list.

3.

Select the desired mode for Quality.

1.

In the Print dialog box, select Image Quality from the drop-down list.

2.

Select a print-quality mode from the Print Quality drop-down list.

Adjusting Color

The TekColor correction options provide simulations of different color devices. Automatic is the default correction for general image processing. See the following table to determine what option you want to use.

TekColor Correction

Automatic

Office Color

Press Match sRGB Display sRGB Vivid

LCD Display

Custom Colors

SWOP Press

Euroscale

Commercial

SNAP Press

Japan Color

ISO Coated

ISO Uncoated

Custom Colors

Description

Applies the best color correction to each graphic element: text, artwork, and photographs.

Approximates the colors on a CRT computer display.

Produces brighter, more saturated colors than sRGB

Display.

Approximates the colors on a LCD computer monitor.

Uses an RGB custom color correction developed for your printer using PhaserMatch software.

Matches Specifications for Web Offset Publications.

Matches FOGRA glossy paper specification.

Approximates U.S. commercial press target.

Matches Specifications for Newsprint Advertising

Production.

Matches Japan Color 2001 specification.

Matches FOGRA 27L specification.

Matches FOGRA 29L specification.

Uses a CMYK custom color correction developed for your printer using PhaserMatch software.

Phaser® 7760 Color Laser Printer

4-3

Controlling the Quality of Your Prints

TekColor Correction

None

Black and White

Use Printer Control

Panel Setting

Description

Applies no color correction. Use with other color management tools, such as ICC (International Color

Consortium) profiles, ColorSync, or the PANTONE

®

Color Chart for your printer.

Converts all colors to shades of gray.

Uses the color correction set in the printer. The color correction can be set in the printer using either the control panel or the CentreWare software (if available).

To select the color correction in a supported driver:

Operating System Steps

Windows 98 SE,

Windows 2000,

Windows XP, or

Windows Server 2003

Mac OS 9.x

Mac OS X, version

10.2 and higher

1.

Select the TekColor tab.

2.

Select the desired color correction. Some of the color corrections are grouped under Office Color or Press Match.

1.

In the Print dialog box, select General.

2.

Select TekColor from the drop-down list.

3.

Select the desired color correction for Color.

1.

In the Print dialog box, select Image Quality from the drop-down list.

2.

Select the desired color correction from the Color Correction dropdown list.

See also:

Knowledge Base at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

4-4

Solving Print-Quality Problems

Solving Print-Quality Problems

This section includes:

Light Lines or Streaks in One Color on page 4-6

Dark Lines, Smudges, or Streaks Through All Colors on page 4-7

Repeating Defects on page 4-8

Colors Align Incorrectly on page 4-9

Incomplete Fusing on page 4-10

Image Is Offset on page 4-11

Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue on page 4-12

Poor Transparency Print Quality on page 4-13

All Colors Are Too Light or Too Dark on page 4-14

Grays Are Not Neutral on page 4-14

Colors Vary Between Computers on page 4-15

Colors Do Not Match on page 4-15

Printed Colors Do Not Match Monitor Colors on page 4-16

PANTONE Colors Do Not Match on page 4-16

Color Settings Not Applied on page 4-16

Print Area Is Not Centered on the Paper on page 4-17

See also:

Knowledge Base at www.xerox.com/office/7760support

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

4-5

Light Lines or Streaks in One Color

Problem

Solving Print-Quality Problems

Thin, light or white lines appear in only one color.

Solution

1.

Open the front door.

2.

Remove the waste cartridge.

3.

Clean the laser window for the color affected with the laser window cleaner wand. See

Cleaning the Laser Window on page 5-3.

Note: The laser window cleaner wand is located inside the front door. Insert the wand until the arrow aligns with the front plate of the printer.

4.

Return the waste cartridge to the printer.

5.

If the problem continues after cleaning the laser window, replace the imaging unit that corresponds to the color affected.

Phaser® 7760 Color Laser Printer

4-6

Solving Print-Quality Problems

Dark Lines, Smudges, or Streaks Through All Colors

Problem

Dark or light marks appear on the page in all colors and/or in non-printed areas.

Solution

1.

Verify that the paper you are using is the correct type for the printer. See

Supported Paper and Media on page 3-3.

2.

Verify that the paper is properly loaded in the tray, and the correct paper type is selected in the Paper Tray Setup

menu. See Loading Paper on page 3-9.

If the problem continues, remove toner print smears:

1.

On the control panel, select Troubleshooting , select Print Quality Problems , and then select Remove Print Smears .

Several cleaning pages are printed.

2.

Repeat Step 1 until no toner appears on the pages.

If the problem is not resolved by removing the toner print smears, follow these steps.

1.

On the control panel, select Troubleshooting , select Print Quality Problems , and then select Repeating Defects Page .

The Repeating Defects page prints with instructions for identifying defective units.

2.

Replace the item(s) identified on the Repeating Defects page to correct the problem.

If the problem continues, replace the belt cleaner assembly or the accumulator belt.

Note: If the Transfer Roller is replaced, on the control panel, select Information , select

Supplies Info , and then select Reset Transfer Roller Life .

Phaser® 7760 Color Laser Printer

4-7

Solving Print-Quality Problems

Repeating Defects

Problem

Spots or lines appear at regular intervals on the page, in the direction the paper moves through the printer, in only one color.

Spots or lines appear at regular intervals on the page, in the direction the paper moves through the printer, in all colors and/or in non-printed areas.

Solution

Print the Repeating Defects page to view instructions for correcting the problem. To print the

Repeating Defects page:

1.

On the control panel, select Troubleshooting , and then press the OK button.

2.

Select Print Quality Problems , and then press the OK button.

3.

Select Repeating Defects , and then press the OK button.

The Repeating Defects page prints.

4.

Follow the instructions on the page to measure the distance between the defects and identify the item causing the defects.

5.

Replace the item causing the defects.

7400-206

Note: If the Transfer Roller is replaced, on the control panel, select Information , select

Supplies Info , and then select Reset Transfer Roller Life .

If the Accumulator Belt is replaced, on the control panel, select Troubleshooting , select

Service Tools , and then select Reset Accumulator Belt Life .

Phaser® 7760 Color Laser Printer

4-8

Colors Align Incorrectly

Problem

Solving Print-Quality Problems

Color has shifted outside the designated area or is superimposed over another color.

Solution

1.

Open and close the front door. The printer performs an automatic registration calibration with the next print.

Phaser® 7760 Color Laser Printer

4-9

Solving Print-Quality Problems

Incomplete Fusing

Problem

Toner appears to be missing from the print, or rubs off easily.

Solution

1.

Verify that the paper you are using is the correct type for the printer. See

Supported Paper and Media on page 3-3.

2.

Verify that the paper is properly loaded in the tray, and the correct paper type is selected in the Paper Tray Setup

menu. See Loading Paper on page 3-9.

If the problem continues:

1.

Do one of the following:

Tray 1 (MPT): Remove and re-insert the paper.

Tray 2-5: Open and close the selected paper tray. The control panel prompts you to confirm or change the paper type.

2.

On the control panel, select Change , press the OK button, and then do one of the following:

Select the correct paper type, and then press the OK button.

Select the next heavier type of paper, and then press the OK button.

Note: Paper types from lightest to heaviest are: Plain Paper, Heavy Plain Paper, Thin Card

Stock, Thick Card Stock, Extra Thick Card Stock.

Phaser® 7760 Color Laser Printer

4-10

Solving Print-Quality Problems

Image Is Offset

Problem

Toner appears to have been pulled off the page and placed about 84 mm (3.3 in.) across the page from where it should be.

Solution

1.

Verify that the paper you are using is the correct type for the printer. See

Supported Paper and Media on page 3-3.

2.

Verify that the paper is properly loaded in the tray, and the correct paper type is selected in the Paper Tray Setup

menu. See Loading Paper on page 3-9.

If the problem continues:

1.

Do one of the following:

Tray 1 (MPT): Remove and re-insert the paper.

Tray 2-5: Open and close the selected paper tray. The control panel prompts you to confirm or change the paper type.

2.

On the control panel, select Change , press the OK button, and then do one of the following:

Select the correct paper type, and then press the OK button.

Select the next lighter type of paper, and then press the OK button.

Note: Paper types from heaviest to lightest are: Extra Thick Card Stock, Thick Card Stock,

Thin Card Stock, Heavy Plain Paper, and Plain Paper.

Phaser® 7760 Color Laser Printer

4-11

Solving Print-Quality Problems

Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue

Problem

Solution

1.

Verify that the paper you are using is the correct type for the printer. See

Supported Paper and Media on page 3-3.

2.

Verify that the paper is properly loaded in the tray, and the correct paper type is selected in the Paper Tray Setup

menu. See Loading Paper on page 3-9.

If the problem continues, adjust the toner transfer setting for the paper type being used:

1.

Load paper into Tray 1 (MPT). The control panel prompts you to change the paper type.

2.

On the control panel, do one of the following:

■ Press the OK button to confirm the paper type. Proceed to Step 3.

■ Follow these steps: a.

Select Change to change the paper type, and then press the OK button.

b.

Scroll the correct paper type, and then press the OK button.

c.

Scroll to the correct paper size, and then press the OK button.

d.

Proceed to Step 3.

3.

Select Printer Setup , select Calibration Setup , select Calibrate for Paper , and then select Calibrate for Paper Pages .

4.

Follow the instructions on the Calibrate for Paper Pages to adjust the toner transfer setting.

Phaser® 7760 Color Laser Printer

4-12

Solving Print-Quality Problems

Poor Transparency Print Quality

Problem

Print-quality defects are occurring on the transparency film:

Light and/or dark spots.

Smeared toner

Light bands on the print

Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction

Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.

Coverage may vary outside these areas; please contact your local representative for details.

To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies .

Solution

1.

Using non-recommended transparency film can cause print-quality problems or damage the printer’s fuser. See the Recommended Media List at www.xerox.com/paper .

2.

Verify that the paper is properly loaded in the tray, and that Transparency is the selected paper type in the Paper Tray Setup menu. See

Loading Paper on page 3-9.

Phaser® 7760 Color Laser Printer

4-13

Solving Print-Quality Problems

All Colors Are Too Light or Too Dark

Problem

Colors appear faded or too dark.

Solution

1.

Use a different TekColor correction in the printer driver.

Note: Setting the TekColor correction to Automatic produces the best results for most documents.

2.

Verify the print-quality mode selected is appropriate for the paper type.

3.

If the problem continues, in the Xerox printer driver (Windows 2000 or later), select the

TekColor tab, click the More Options button, and then adjust the Lightness level.

4.

If the problem continues, calibrate the colors using the procedures on the Color

Calibration Tutorial page. To print the Color Calibration Tutorial page: a.

On the control panel, select Troubleshooting , and then press the OK button.

b.

Select Print Quality Problems , and then press the OK button.

c.

Select Calibrate Colors , and then press the OK button.

d.

Select Tutorial Page , and then press the OK button.

e.

Follow the instructions on the page.

See also:

Adjusting Color on page 4-3

Grays Are Not Neutral

Problem

The grays on the printed page are not neutral; they contain color tints.

Solution

Follow the procedures on the Color Calibration Tutorial page to calibrate the printer’s colors.

To print the Color Calibration Tutorial page:

1.

On the control panel, select Troubleshooting , and then press the OK button.

2.

Select Print Quality Problems , and then press the OK button.

3.

Select Calibrate Colors , and then press the OK button.

4.

Select Tutorial Page , and then press the OK button.

5.

Follow the instructions on the page.

Phaser® 7760 Color Laser Printer

4-14

Solving Print-Quality Problems

Colors Vary Between Computers

Problem

The colors printed from one computer do not match the colors printed from a different computer.

Solution

To prevent color differences in print jobs:

1.

Confirm that the driver settings for Print Quality and Color Correction are identical on both computers.

2.

Adjust the settings as needed.

Note: Driver settings override the settings selected on the control panel.

See also:

Adjusting Color on page 4-3

Colors Do Not Match

Problem

The color produced by the printer is different from the color that it must match.

Solution

For help with color matching problems, go to www.xerox.com/office/7760support .

If the problem continues, follow these steps to ensure that the colors produced by the printer are accurate:

1.

Confirm that the settings for Print Quality and Color Correction are identical in the printer driver and on the control panel.

2.

Print the RGB Sampler pages or CMYK Sampler pages.

a.

On the control panel, highlight Information , and then press the OK button.

b.

Select Sample Pages , and then press the OK button.

c.

Select RGB Sampler Pages or CMYK Sampler Pages , and then press the OK button.

3.

Use the values on the color sampler to set the colors in your document.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

4-15

Solving Print-Quality Problems

Printed Colors Do Not Match Monitor Colors

Problem

The color produced by the printer looks different from the color that appears on the monitor.

Solution

See also:

Advanced Features Guide at www.xerox.com/office/7760support

PANTONE Colors Do Not Match

Problem

The colors printed on the document do not match the Phaser 7760 Color Laser Printer

PANTONE color chart.

Solution

For information about PANTONE color matching, go to www.xerox.com/office/7760support .

Color Settings Not Applied

Problem

If you change color settings on the control panel, it does not affect the colors in the printed document.

Solution

To change color settings:

1.

In the printer driver, change the settings for Print Quality and Color Correction.

See also:

Adjusting Color on page 4-3

Note: Driver settings override the settings selected on the control panel.

Phaser® 7760 Color Laser Printer

4-16

Solving Print-Quality Problems

Print Area Is Not Centered on the Paper

Problem

The printed area appears outside the margins on the page.

Solution

1.

On the control panel, select Paper Tray Setup , and then press the OK button.

2.

Select the tray you are using, and then press the OK button.

3.

Verify that the tray is set to the correct paper size.

4.

If the problem continues, use the Calibrate Margins page to shift the print area on the paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the printer does not print outside this rectangle. a.

On the control panel, select Troubleshooting , and then press the OK button.

b.

Select Print Quality Problems , and then press the OK button.

c.

Select Calibrate Margins , and then press the OK button.

d.

Select Calibrate Margins Page , and then press the OK button.

e.

Select the appropriate tray to calibrate, and then press the OK button.

f.

Follow the instructions on the Calibrate Margins page.

See also:

Advanced Features Guide at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

4-17

.

Maintenance

This chapter includes:

Cleaning the Printer on page 5-2

Adding Staples on page 5-6

Emptying the Punch Waste Box on page 5-12

Ordering Supplies on page 5-14

Moving and Repacking the Printer on page 5-16

See also:

Maintenance video tutorials at www.xerox.com/office/7760support

Replacing supplies video tutorials at www.xerox.com/office/7760support

Phaser® 7760 Color Laser Printer

5-1

Cleaning the Printer

Cleaning the Printer

Cleaning the Outside of the Printer

Cleaning the Laser Window

on page 5-2

on page 5-3

For safety information, see User Safety on page A-1.

Cleaning the Outside of the Printer

To remove stains, clean the outside of the printer using a soft, damp cloth moistened with a mild neutral detergent. Do not spray detergent directly onto the printer.

Warning: To prevent electric shock, turn the printer off and unplug the power cord from the electrical outlet before cleaning the printer.

Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.

Phaser® 7760 Color Laser Printer

5-2

Cleaning the Laser Window

1.

Open the front door.

2.

Open the waste cartridge door.

7760-008

Cleaning the Printer

7760-024

3.

Remove the waste cartridge.

7760-158

Note: Be careful not to spill the toner by tipping the waste cartridge.

Phaser® 7760 Color Laser Printer

5-3

4.

Remove the laser cleaning wand from the front door.

Cleaning the Printer

7760-160

5.

Insert the laser cleaning wand into the slot, there is a slot for each imaging unit labeled one through four.

6.

Push the wand all the way into the printer until you hear a click or the arrow on the wand aligns with the front of the printer.

Note: If you fail to insert the laser cleaning wand fully into the printer, the laser window will not be cleaned properly.

1

2x

7.

Repeat Steps 4 and 5 for each slot.

8.

Place the laser cleaning wand back inside the front door.

2 3

7760-159

Phaser® 7760 Color Laser Printer

5-4

9.

Reinsert the waste cartridge and close the waste cartridge door.

Cleaning the Printer

7760-026

10.

Close the front door.

7760-008

Phaser® 7760 Color Laser Printer

5-5

Adding Staples

Adding Staples

This section includes:

Adding Staples to the Regular Stapler on page 5-6

Adding Staples to the Booklet Stapler on page 5-9

Note: The staple cartridges used in the booklet stapler are different from the staple cartridges used in the regular stapler.

Adding Staples to the Regular Stapler

When the control panel displays a message that staple cartridge R1 needs to be replaced, follow these steps.

1.

Open the finisher door.

2.

Pull the staple unit to the front of the finisher.

7760-075

7760-076

Phaser® 7760 Color Laser Printer

5-6

3.

Remove the stapler by the handle.

R4

3

2c

XE R1

7760-077

4.

If present, remove the empty staple cartridge.

Adding Staples

5.

Insert a new staple cartridge.

7760-080

7760-081

Phaser® 7760 Color Laser Printer

5-7

6.

Insert the stapler in the finisher.

R4

3

2c

XE R1

7760-078

7.

Close the finisher door.

Adding Staples

7760-003

Phaser® 7760 Color Laser Printer

5-8

Adding Staples

Adding Staples to the Booklet Stapler

When the control panel displays a message that staple cartridge R2 or R3 needs to be replaced, follow these steps.

1.

Open the finisher door.

7760-075

2.

Pull out the booklet stapler.

7760-094

Phaser® 7760 Color Laser Printer

5-9

Adding Staples

3.

Remove the empty staple cartridges.

Note: Usually both cartridges are empty at the same time. You may need to replace both of them.

4.

Insert the new staple cartridges.

7760-095

5.

Push the booklet stapler into the printer.

7760-140

7760-141

Phaser® 7760 Color Laser Printer

5-10

6.

Close the finisher door

7760-003

Adding Staples

Phaser® 7760 Color Laser Printer

5-11

Emptying the Punch Waste Box

1.

Open the finisher door.

Emptying the Punch Waste Box

7760-075

2.

Remove the punch waste box.

3.

Empty the waste.

4.

Insert the punch waste box into the finisher.

7760-084

7760-085

Phaser® 7760 Color Laser Printer

5-12

5.

Close the finisher door.

Emptying the Punch Waste Box

7760-003

Phaser® 7760 Color Laser Printer

5-13

Ordering Supplies

Ordering Supplies

This section includes:

Consumables on page 5-14

Routine Maintenance Items on page 5-14

When to Order Supplies on page 5-14

Recycling Supplies on page 5-15

Certain consumables and routine maintenance items need to be ordered occasionally. Each item includes installation instructions in the package.

Consumables

Toner Cartridges (Cyan, Magenta, Yellow, Black)

Staple Pack (if the optional finisher is installed)

Routine Maintenance Items

Imaging Units (Cyan, Magenta, Yellow, Black)

Fuser

Transfer Roller

Accumulator Belt

Belt Cleaner Assembly

Waste Cartridge

Feed Roller Kit

When to Order Supplies

The control panel displays a warning when the supply nears its replacement time. Verify that you have replacements on hand. It is important to order these supplies when the messages first appear to avoid interruptions to your printing. The control panel displays an error message when the supply must be replaced.

To view the current status of your printer supplies, print the Supplies Usage page:

1.

On the control panel, select Information , and then press the OK button.

2.

Select Supplies Info , and then press the OK button.

3.

Select Supplies Usage Page to print.

Phaser® 7760 Color Laser Printer

5-14

Ordering Supplies

To order supplies, contact your local reseller or go to the Xerox Supplies website at www.xerox.com/office/7760supplies .

Caution: Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service

Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies not specified for this printer. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details.

Recycling Supplies

For information on Xerox supplies recycling programs, go to www.xerox.com/gwa .

Phaser® 7760 Color Laser Printer

5-15

Moving and Repacking the Printer

Moving and Repacking the Printer

This section includes:

Precautions for Moving the Printer on page 5-16

Moving the Printer Within the Office on page 5-16

Preparing the Printer for Shipment on page 5-16

See also:

User Safety on page A-1

Precautions for Moving the Printer

To view precautions and guidelines for safely moving your printer, see the User Safety

appendix in this user guide.

Moving the Printer Within the Office

The printer can be safely moved from one location within an office to another as long as it travels in an upright position, gently over smooth surfaces. Any jarring movement, such as pushing the printer over a raised door threshold or across a parking lot, can damage the printer.

Preparing the Printer for Shipment

Caution: Do not remove the toner cartridges; leave them locked in the normal operating position.

Repack the printer using the original packing material and boxes or a Xerox repackaging kit.

Additional instructions for repacking the printer are provided in the repackaging kit. If you do not have all the original packaging, or are unable to repackage the printer, contact your local

Xerox service representative.

Caution: Damage to the printer resulting from improper moving or failure to repackage the printer properly for shipment, is not covered by the warranty, service agreement, or Total

Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and

Canada. Coverage may vary outside these areas; please contact your local representative for details.

Phaser® 7760 Color Laser Printer

5-16

Troubleshooting

This chapter includes:

Preventing Jams on page 6-2

Getting Help on page 6-23

See also:

Troubleshooting video tutorials at www.xerox.com/office/7760support

Print Quality on page 4-1

Phaser® 7760 Color Laser Printer

6-1

Clearing Paper Jams

Clearing Paper Jams

This section includes:

Preventing Jams on page 6-2

Jams in the Printer on page 6-2

Jams in the Finisher on page 6-17

Preventing Jams

To reduce the frequency of paper jams, follow the guidelines and instructions in

Printing

Basics

which includes information about supported paper and other media, guidelines for paper and media usage, and instructions for properly loading paper and media in the trays. Do not overload the paper trays.

Jams in the Printer

This section includes:

Jam at the Fuser on page 6-3

Jam at the Duplex Unit on page 6-5

Jam at Tray 1 (MPT) on page 6-7

Jam at Tray 2 on page 6-9

Jam at Tray 3, 4, or 5 on page 6-11

Jam at Left Door (A, B, or C) on page 6-14

Phaser® 7760 Color Laser Printer

6-2

Clearing Paper Jams

Jam at the Fuser

Follow these steps to clear the jam.

1.

Push up on the latch on the left side of the printer to open Left Door A.

Warning: Use caution, components behind the left door may be hot.

2.

Lift the release latch located on the right side of the fuser.

7760-010

7760-040

Phaser® 7760 Color Laser Printer

6-3

Clearing Paper Jams

3.

Remove the jammed paper. Confirm that all paper fragments are removed.

7760-041

4.

Push down the release latch.

7760-042

5.

Close Left Door A.

7760-015

Phaser® 7760 Color Laser Printer

6-4

Jam at the Duplex Unit

Follow these steps to clear the jam.

1.

Open Tray 1 (MPT).

2.

Open Left Door D.

7760-027

Clearing Paper Jams

3.

Remove the jammed paper.

7760-028

7760-029

Phaser® 7760 Color Laser Printer

6-5

4.

Close Left Door D.

7760-030

Clearing Paper Jams

Phaser® 7760 Color Laser Printer

6-6

Clearing Paper Jams

Jam at Tray 1 (MPT)

Follow these steps to clear the jam.

1.

Remove paper from Tray 1 (MPT). Confirm that all paper fragments are removed.

7760-046

2.

Remove the jammed paper from Tray 1 (MPT). Confirm that all paper fragments are removed.

7760-047

3.

If you did not find paper in Step 2, push up the latch on the left side of the printer to open

Left Door A.

7760-010

Warning: Use caution, components behind the left door may be hot.

Phaser® 7760 Color Laser Printer

6-7

Clearing Paper Jams

4.

Remove the jammed paper. Confirm that all paper fragments are removed.

7760-048

5.

Close Left Door A.

6.

Replace the paper in the tray.

Note: Do not load paper above the fill line.

MAX

7760-015

7760-068

Phaser® 7760 Color Laser Printer

6-8

Clearing Paper Jams

Jam at Tray 2

Follow these steps to clear the jam.

1.

Open Left Door B.

7760-050

2.

Remove the jammed paper. Confirm that all paper fragments are removed.

7760-051

3.

Close Left Door B.

7760-052

Phaser® 7760 Color Laser Printer

6-9

Clearing Paper Jams

4.

Pull Tray 2 out of the printer.

5.

Remove any crumpled paper from the tray.

7760-053

7760-054

6.

Verify that the paper is loaded correctly in the tray and that the guides are pressed firmly against the paper.

7760-055

7.

Push Tray 2 completely back into the printer.

Phaser® 7760 Color Laser Printer

6-10

Clearing Paper Jams

Jam at Tray 3, 4, or 5

Follow these steps to clear the jam.

1.

Open Left Door C.

7760-043

2.

Remove the jammed paper. Confirm that all paper fragments are removed.

7760-044

3.

Close Left Door C.

7760-045

Phaser® 7760 Color Laser Printer

6-11

4.

Pull out the tray specified on the control panel.

Clearing Paper Jams

5.

Remove crumpled paper from the tray.

7760-133

7760-134

Note: If you have a high-capacity feeder, lift the cover on the left side of the tray and remove the jammed paper.

7760-135

Phaser® 7760 Color Laser Printer

6-12

Clearing Paper Jams

6.

Verify that the paper is loaded correctly in the tray and that the guides are pressed firmly against the paper.

7.

Push the tray completely into the printer.

7760-136

7760-137

Phaser® 7760 Color Laser Printer

6-13

Jam at Left Door (A, B, or C)

Follow these steps to clear the jam.

1.

Open the left door (A, B, or C) specified on the control panel.

Door A

Clearing Paper Jams

Door B

7760-010

Door C

7760-043

7760-050

Phaser® 7760 Color Laser Printer

6-14

Clearing Paper Jams

2.

Remove the jammed paper. Confirm that all paper fragments are removed.

Door A

Door B

7760-041

Door C

7760-044

7760-051

Phaser® 7760 Color Laser Printer

6-15

3.

Close the left door.

Door A

Clearing Paper Jams

Door B

7760-015

Door C

7760-045

7760-052

Phaser® 7760 Color Laser Printer

6-16

Jams in the Finisher

This section includes:

Jam Under the Top Output Tray on page 6-17

Jam at the Finisher - Area 2 on page 6-18

Jam at the Finisher - Area 3 on page 6-19

Jam at the Finisher - Area 4 on page 6-20

Jam at Finisher Cover on page 6-21

Finisher Stacker Output Tray Jammed on page 6-22

Jam Under the Top Output Tray

Follow these steps to clear the jam.

1.

Open the top output tray.

Clearing Paper Jams

7760-034

2.

Remove any jammed paper. Confirm that all paper fragments are removed.

7760-035

3.

Close the top output tray.

7760-036

Phaser® 7760 Color Laser Printer

6-17

Clearing Paper Jams

Jam at the Finisher - Area 2

Follow these steps to clear the jam.

1.

Open the finisher door.

7760-075

2.

Open the handle (2a or 2b) specified on the control panel.

3.

If necessary, rotate knob 2c counterclockwise.

4.

Pull the jammed paper out of the finisher. Confirm that all paper fragments are removed.

2a

2b

5.

Close handle 2a and/or 2b by moving them to the left.

6.

Close the finisher door.

7760-163

2c

Phaser® 7760 Color Laser Printer

6-18

Jam at the Finisher - Area 3

Follow these steps to clear the jam.

1.

Open the finisher door.

2.

Open handle 3 by pulling it down.

7760-075

Clearing Paper Jams

3

7760-170

3.

Pull the jammed paper out of the finisher. Confirm that all paper fragments are removed.

4.

Close handle 3.

5.

Close the finisher door.

7760-003

Phaser® 7760 Color Laser Printer

6-19

Jam at the Finisher - Area 4

Follow these steps to clear the jam.

1.

Open the finisher door.

2.

Pull out the booklet drawer (labeled 4).

7760-075

Clearing Paper Jams

7760-157

3.

Remove the jammed paper. Confirm that all paper fragments are removed.

4.

Close the finisher door.

7760-003

Phaser® 7760 Color Laser Printer

6-20

Jam at Finisher Cover

Follow these steps to clear the jam.

1.

Lift the finisher cover (Door 5).

5

7760-031

2.

Remove the jammed paper.

3.

Close the finisher cover (Door 5).

7760-032

Clearing Paper Jams

7760-033

Phaser® 7760 Color Laser Printer

6-21

Finisher Stacker Output Tray Jammed

Follow these steps to clear the jam.

1.

Pull the jammed paper out of the stacker output tray.

Clearing Paper Jams

7760-032

2.

Open the finisher door.

7760-075

3.

Close the finisher door.

7760-003

Phaser® 7760 Color Laser Printer

6-22

Getting Help

Getting Help

This section includes:

Control Panel Messages on page 6-23

PrintingScout Alerts on page 6-23

PhaserSMART Technical Support on page 6-24

Web Links on page 6-24

Xerox provides several automatic diagnostic tools to help you produce and maintain print quality.

See also:

Xerox Support Centre on page 1-14

Control Panel Messages

The control panel provides you with information and troubleshooting help. When an error or warning condition occurs, the control panel displays a message informing you of the problem.

In many cases, the control panel also displays an animated graphic showing the location of the problem, such as the location of a paper jam.

Press the Help button on the control panel to view additional information about the message or menu displayed. The Help button is labeled with a ? symbol.

7760-170

PrintingScout Alerts

PrintingScout is a tool that is installed with your Xerox printer driver. It automatically checks the printer status when you send a print job. If the printer is unable to print your job,

PrintingScout automatically displays an alert on your computer screen to let you know that the printer needs attention. Click the alert to view instructions explaining how to fix the problem.

Phaser® 7760 Color Laser Printer

6-23

Getting Help

PhaserSMART Technical Support

PhaserSMART Technical Support is an automated, internet-based support system that uses your default web browser to send diagnostic information from your printer to the Xerox website for analysis. PhaserSMART Technical Support examines the information, diagnoses the problem, and proposes a solution. If the problem is not resolved with the solution,

PhaserSMART Technical Support assists you in opening a Service Request with Xerox

Customer Support.

To access PhaserSMART Technical Support:

1.

Open your browser and go to www.phaserSMART.com

.

2.

Enter your printer’s IP address in the browser window.

3.

Follow the instructions on the screen.

Web Links

Xerox provides several websites that offer additional help on your Phaser 7760 Printer. A set of Xerox links is installed in your web browser’s Favorites folder when you install the Xerox printer drivers on your computer. The Troubleshooting tab in your Windows printer driver also includes useful links. Use the following websites to obtain more information.

Resource Link

PhaserSMART Technical Support automatically diagnoses problems on your networked printer and proposes solutions:

Technical support information for your printer, includes online Technical Support, Knowledge Base, driver downloads, documentation, video tutorials, and much more:

Supplies for your printer:

A resource for tools and information, such as interactive tutorials, printing templates, helpful tips, and customized features to meet your individual needs:

Local sales and support center:

Printer registration:

Material Safety Data Sheets identify materials, and provide information on safely handling and storing hazardous materials:

Information about recycling supplies: www.phasersmart.com

www.xerox.com/office/7760support www.xerox.com/office/7760supplies www.colorconnection.xerox.com

www.xerox.com/office/contacts www.xerox.com/office/register www.xerox.com/office/msds

(U.S. and Canada) www.xerox.com/environment _europe

(European Union) www.xerox.com/gwa

Phaser® 7760 Color Laser Printer

6-24

User Safety

Your printer and the recommended supplies have been designed and tested to meet strict safety requirements. Attention to the following information ensures the continued safe operation of your printer.

Electrical Safety

Use the power cord supplied with your printer.

Plug the power cord directly into a properly grounded electrical outlet. Make sure each end of the cord is securely connected. If you do not know if an outlet is grounded, ask an electrician to check the outlet.

Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have a ground connection terminal.

Do not use an extension cord or power strip.

Verify that the printer is plugged into an outlet that is capable of providing the correct voltage and power. Review the printer’s electrical specification with an electrician if necessary.

Warning: Avoid the potential of electrical shock by ensuring that the printer is properly grounded. Electrical products may be hazardous if misused.

Do not place the printer in an area where people might step on the power cord.

Do not place objects on the power cord.

Do not block the ventilation openings. These openings are provided to prevent overheating of the printer.

Do not drop paper clips or staples into the printer.

Warning: Do not push objects into slots or openings on the printer. Making contact with a voltage point or shorting out a part could result in fire or electrical shock.

If you notice unusual noises or odors:

1.

Turn off the printer immediately.

2.

Disconnect the power cord from the electrical outlet.

3.

Call an authorized service representative to correct the problem.

Phaser® 7760 Color Laser Printer

A-1

The power cord is attached to the printer as a plug-in device at the back of the printer. If it is necessary to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.

Warning: Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Except for user-installable options, there are no parts that you can maintain or service behind these covers.

Note: Leave the printer on for optimum performance; it does not pose a safety hazard.

The following are hazards to your safety:

The power cord is damaged or frayed.

Liquid is spilled into the printer.

The printer is exposed to water.

If any of these conditions occur, do the following:

1.

Turn off the printer immediately.

2.

Disconnect the power cord from the electrical outlet.

3.

Call an authorized service representative.

Laser Safety

With specific regard to lasers, this printer complies with laser product performance standards set by governmental, national, and international agencies and is certified as a Class 1 Laser

Product. The printer does not emit hazardous light because the beam is totally enclosed during all modes of customer operation and maintenance.

Maintenance Safety

Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your printer.

Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance and could create a hazardous condition.

Do not attempt to open, reuse, or burn any consumables or routine maintenance items. For information on Xerox supplies recycling programs, go to www.xerox.com/gwa .

Phaser® 7760 Color Laser Printer

A-2

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.

Your attention to the following safety guidelines helps to ensure the continued, safe operation of your printer.

Printer Location

Place the printer in a dust-free area within a temperature range of 50° F to 90° F (10° C to

32° C) and within the following humidity range:

Optimal Print Quality: 50% – 70%

Operating: 20% – 80%

Printer Clearance

Place the printer in an area where there is adequate space for ventilation, operation, and servicing. The recommended minimal spacing is:

Overhead Clearance:

■ 60.96 cm (24.0 in.) above the printer

Total Height Requirements:

Printer: 49.3 cm (19.4 in.)

1500-Sheet Feeder: 36.4 cm (14.3 in.)

2500-Sheet High-Capacity Feeder: 36.4 cm (14.3 in.)

Total Width Requirements:

■ Finisher: 61 cm (24 in.) on the right side of the printer

Other Clearances:

42.5 cm (16.7 in.) in front of the printer

13 cm (5.3 in.) behind the printer

36.8 cm (14.5 in.) on the left side of the printer

5 cm (1.96 in.) on the right side of the printer, without the finisher

Phaser® 7760 Color Laser Printer

A-3

Operational Guidelines

■ Do not block or cover the slots and openings on the printer. The printer may overheat without adequate ventilation.

For optimum performance, use the printer at elevations below 2,000 m (6,562 ft.).

Do not place the printer near a heat source.

Do not place the printer in direct sunlight to avoid exposure of light-sensitive components when the doors are open.

Do not place the printer in line with the cold air flow from an air conditioning system.

Place the printer on a level, solid non-vibrating surface with adequate strength for the weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. The base printer weight without any packaging materials is approximately 89 kg (196 lb.).

Printing Safety Guidelines

Wait 10-15 seconds between turning the printer off and on.

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

When the printer is printing:

■ Do not remove the paper source tray that you selected in either the printer driver or control panel.

Do not open the doors.

Do not move the printer.

Printer Supplies

Use the supplies specifically designed for your printer. The use of unsuitable materials may cause poor performance and a possible safety hazard.

Follow all warnings and instructions marked on, or supplied with, the printer, options, and supplies.

Caution: Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service

Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies not specified for this printer. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details.

Phaser® 7760 Color Laser Printer

A-4

Moving the Printer

Follow these guidelines to avoid injuring yourself or damaging the printer:

Turn off the printer and unplug all power cables before moving the printer.

Always use four people to lift the printer.

Alway lift the printer from the designated lift points.

7760-162

■ Do not place any food or liquids on the printer.

Caution: Damage to the printer resulting from improper moving or failure to repackage the printer properly for shipment, is not covered by the warranty, service agreement, or Total

Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and

Canada. Coverage may vary outside these areas; please contact your local representative for details.

Phaser® 7760 Color Laser Printer

A-5

Symbols Marked on Product

The following symbols may be marked on your product.

Use caution (or draws attention to a particular component). See the manual(s) for information.

Avoid pinching fingers in the printer. Use caution to avoid personal injury.

Hot surface on or in the printer. Use caution to avoid personal injury.

Do not touch.

Do not burn the item.

It may take 30 minutes for the fuser to cool down.

00:30

This product contains a laser unit. See the manual(s) for information.

Phaser® 7760 Color Laser Printer

A-6

Index

Numerics

2-sided printing, 3-30 automatic, 3-30

binding edge options, 3-31 selecting, 3-31

A accumulator belt

ordering supplies, 5-14

adding staples, 5-6 regular stapler, 5-6

adjusting color, 4-3

all colors too light or too dark, 4-14

AutoIP

manually setting the printer’s IP address, 2-8

setting the printer’s IP address dynamically, 2-6

automatic

2-sided printing, 3-30

TekColor correction, 4-3

automatically setting the printer’s IP address

(Windows only), 2-5

available printer drivers, 2-9

B

basic printing, 3-2

belt cleaner assembly

ordering supplies, 5-14

binding edge printing options, 3-31

black and white, 4-3

booklet stapler

adding staples, 5-9

C calibrate

colors, 4-14

margins, 4-17

caution symbols, A-6

CentreWare IS

changing or modifying the printer’s IP address, 2-6 setting the printer’s IP address dynamically, 2-6 changing the IP address using

CentreWare IS, 2-6

choosing a network connection, 2-3

cleaning

laser window, 5-3

printer, 5-2

color correction

selecting in the printer driver, 4-3

color sampler pages, 1-12

colors

adjusting, 4-3

align incorrectly, 4-9

all colors too light or too dark, 4-14 calibrating, 4-14

change settings on the control panel, 4-16 color settings not applied, 4-16

dark lines, smudges, or streaks through all colors, 4-7

description, 4-3

grays contain color tints, 4-14 grays not neutral, 4-14

light or dark lines appear in one color, 4-6

PANTONE colors do not match, 4-16 printed colors do not match monitor colors, 4-16

produced by printer are incorrect, 4-15

smudges or smears in one color, 4-6

vary between computers, 4-15

configuration page

information pages, 1-11

configuring the network address, 2-5

connection

Ethernet, 2-4

USB, 2-3

consumables, 5-14

control panel, 1-9

change color settings, 4-16

controlling print quality, 4-2

features and layout, 1-9

information pages, 1-11

layout, 1-10

Menu Map, 1-11

Phaer® 7760 Color Laser Printer

Index-1

messages, 6-23

printing sample pages, 1-11

custom size paper, 3-45 single-sided printing, 3-45

supported for Tray 1 (MPT), 3-6, 3-8,

3-45 supported for Trays 2-n, 3-45

custom size printing

2-sided printing, 3-45

duplex unit

paper jam, 6-5

Dynamic Domain Name Service

(DDNS), 2-7

dynamically setting the printer’s IP address, 2-6

D

dark lines in all colors, 4-7

dark lines in one color, 4-6

database

local Domain Name Service (DNS) name space, 2-7

default router/gateway address, 2-6

DHCP

enable for Dynamic Domain Name

Service (DDNS), 2-7

enabled by default on Phaser printers, 2-6

manually setting the printer’s IP address, 2-8

setting the printer’s IP address dynamically, 2-6

Domain Name Service (DNS)

local domain name space database, 2-7 using host names, 2-7

drivers

available, 2-9 description, 2-9 installing, 2-9

Macintosh OS 9.x, 2-11

Macintosh OS X version 10.2 and

10.3, 2-12

Macintosh OS X version 10.4, 2-14

PCL, 2-9

PostScript, 2-9

selecting 2-sided printing, 3-31

selecting hole punching, 3-52

selecting stapling, 3-51

setting the default output tray, 3-48

UNIX, 2-9

Windows 2000 or later, 2-10

Windows 98 SE or later, 2-10

Xerox Support Centre, 1-14

duplex entrance

paper jam, 6-3

E

electrical safety, A-1

emptying the waste punch box, 5-12

enhanced print-quality mode, 4-2

envelopes, 3-36 guidelines, 3-36

printing from Tray 1 (MPT), 3-37

error and warning messages, 6-23

Ethernet connection, 2-4

F features

printer configurations, 1-7

standard, 1-6

feed roller kit

ordering supplies, 5-14

finisher

door paper jam, 6-18, 6-20, 6-21

hole puncher, 3-51

paper jam, 6-17 saddle stapler paper jam, 6-17

stapler, 3-50

stapler paper jam, 6-17

upper output tray paper jam, 6-22

format

IP address, 2-6

fuser

ordering supplies, 5-14

fusing

incomplete, 4-10

G

getting help, 6-23

PhaserSMART, 6-24

PrintingScout Alerts, 6-23

technical support, 1-13

web links, 6-24

glossy paper, 3-40

printing from Tray 1 (MPT), 3-41

printing guidelines, 3-40

Index

Phaer® 7760 Color Laser Printer

Index-2

I guidelines

automatic 2-sided printing, 3-30

envelopes, 3-36

glossy paper, 3-40

labels, 3-38

operational, A-4

paper storage, 3-4

paper usage, 3-3

printing on both sides of the paper, 3-30

printing safety, A-4

H

hole puncher, 3-51 options, 3-51

selecting hole punching from the printer driver, 3-52

host names

using with Domain Name Service

(DNS), 2-7

image

offset, 4-11

imaging unit

ordering supplies, 5-14

information

about your printer, 1-13

Advanced Features Guide, 1-13 information pages, 1-13

PhaserSMART, 1-13 printer management tools, 1-13

Quick Reference Guide, 1-13

Setup Guide, 1-13 technical support, 1-13

User Guide, 1-13 video tutorials, 1-13

Xerox Support Centre, 1-14

information pages, 1-11 configuration page, 1-11

Menu Map, 1-11

Paper Tips page, 3-5

inside the printer, 1-4

installing printer drivers, 2-9

Mac OS 9.x, 2-11

Mac OS X, version 10.2 and 10.3, 2-12

Mac OS X, version 10.4, 2-14

Windows 98 SE or later, 2-10

IP address

changing or modifying using

CentreWare IS, 2-6 dynamically setting, 2-6 format, 2-6 router address, 2-6

setting automatically (Windows only), 2-5

J jams

clearing, 6-2

duplex unit, 6-5

finisher, 6-17

finisher area 2, 6-18

finisher area 3, 6-19

finisher area 4, 6-20

finisher cover 5, 6-21

finisher stacker output tray, 6-22

fuser, 6-3

left door, 6-14

preventing, 6-2

Tray 1 (MPT), 6-7

Tray 2, 6-9

Tray 3, 4, or 5, 6-11

under top output tray, 6-17

job individual printing options

Macintosh, 3-27

Windows, 3-25

selecting a print-quality mode, 4-2

selecting printing options

Windows, 3-25

L

labels, 3-38 guidelines, 3-38

printing from Tray 1 (MPT), 3-39

laser safety, A-2

lifting the printer, 5-16

light lines in one color, 4-6

lines, smudges, streaks, 4-7

loading paper

Tray 1 (MPT), 3-9

Trays 2-n, 3-17

Local Area Network (LAN), 2-5

Index

Phaer® 7760 Color Laser Printer

Index-3

Index

M

Macintosh

manual feed, 3-16

PostScript driver settings, 3-27 selecting printing options for an individual job, 3-27

Xerox Support Centre, 1-14

Macintosh OS 9.x

printer drivers, 2-11

Macintosh OS X version 10.2 and 10.3

printer drivers, 2-12

Macintosh OS X version 10.4, 2-14

Macintosh printer drivers

PostScript driver settings, 3-27

maintenance

adding staples, 5-6

consumables, 5-14

emptying the waste punch box, 5-12

ordering supplies, 5-14 routine maintenance items, 5-14

safety, 5-16, A-2

manual feed, 3-16

Macintosh, 3-16

Windows, 3-16

manually setting the printer’s IP address, 2-8 overrides AutoIP, 2-8 overrides DHCP, 2-8

margins

printed area does not fit on the paper, 4-17

maximum resolution (dpi), 1-6

media

supported, 3-3

unacceptable types, 3-4

memory, 1-7

Menu Map, 1-11

messages

control panel, 6-23

PrintingScout, 6-23

modes

print-quality, 4-2

modifying the IP address using

CentreWare IS, 2-6

monitor

colors do not match printed color, 4-16

moving the printer

precautions, 5-16 preparing for shipment, 5-16 within the office, 5-16

N network

choosing a network connection, 2-3

configuring the network address, 2-5 creating a Local Area

Network (LAN), 2-5

mask, 2-6

setup and configuration, 2-2

TCP/IP and IP addresses, 2-5

network connection, 2-4

Ethernet, 2-4

O

Office Color, 4-3

offsetting output, 3-49

operating systems

printer drivers, 2-9

operational guidelines, A-4

operational safety, A-3

options

additional trays, 1-7 advanced finisher, 1-7 internal hard drive, 1-7 memory, 1-7 printer, 1-7

printing, 3-24

ordering supplies, 5-14

output options

hole punching, 3-51

offsetting output, 3-49

selecting, 3-48

stapling, 3-50

output tray

default, 3-48

P paper

custom sizes, 3-45

damaging to printer, 3-4 damaging to the printer, 3-4

envelopes, 3-36

feeding manually in Tray 1 (MPT), 3-16

glossy, 3-40

labels, 3-38

loading in the paper trays, 3-9

printing on specialty media, 3-33

storage guidelines, 3-4

supported, 3-3

Phaer® 7760 Color Laser Printer

Index-4

supported for Tray 1 (MPT), 3-6, 3-8

supported sizes and weights, 3-5

transparencies, 3-33

types, 3-3

types supported by the stapler, 3-50

unacceptable media types, 3-4

usage guidelines, 3-3

paper jams

clearing, 6-2

door (letter), 6-14

door Tray 2, 6-9

door Tray 3, 4, or 5, 6-11

duplex entrance, 6-3

duplex unit, 6-5

finisher saddle stapler, 6-17 finisher top output tray, 6-17

finisher, area 2, 6-18

finisher, area 3, 6-19

finisher, area 4, 6-20

fuser, 6-3

in the finisher, 6-17

in the printer, 6-2

misfeed at Tray 1 (MPT), 6-7

misfeed at Tray 2, 6-9, 6-11

preventing, 6-2

Tray 1 (MPT), 6-7

PCL, 2-9

fonts, 1-6

PhaserCal software, 1-8

PhaserMatch software, 1-8

PhaserSMART, 1-13

technical support, 1-13, 6-24

photo print-quality mode, 4-2

PostScript, 2-9

fonts, 1-6

preparing the printer for shipment, 5-16

pre-printed paper, 3-9

Press Match, 4-3

print

TekColor, 4-3 adjusting color, 4-3

image is offset, 4-11, 4-12

print job

selecting a print-quality mode, 4-2

print quality

modes, 4-2

solving problems, 4-5

print speed

maximum, 1-6

Index printer

advanced features, 1-7 available configurations, 1-7

caution symbols, A-6

changing or modifying the IP address using CentreWare IS, 2-6

configurations, 1-7

connection, 1-6

control panel features, 1-9

drivers, 2-9

fonts, 1-6

information resources, 1-13

location guidelines, A-3

maximum print speed, 1-6 maximum resolution (dpi), 1-6

moving within the office, 5-16

options, 1-7

paper jams, 6-2

precautions for moving, 5-16 preparing for shipment, 5-16

printed colors are incorrect, 4-15

registration, 6-24

safety clearances, A-3

selecting hole punching from the printer driver, 3-52

setting the IP address, 2-5

standard features, 1-6

supplies, A-4

trays, 1-6

views, 1-2, 1-3, 1-4, 1-5

printer driver

available, 2-9

controlling print quality, 4-2

installing, 2-9

Layout tab, 3-25

Macintosh OS 9.x, 2-11

Macintosh OS X version 10.2 and

10.3, 2-12

Macintosh OS X version 10.4, 2-14

operating systems, 2-9

Output Options tab, 3-25

page description languages, 2-9

Paper/Quality tab, 3-25

PCL, 2-9

PostScript, 2-9

PostScript driver settings

(Macintosh), 3-27

selecting hole punching, 3-52

selecting stapling, 3-51

Phaer® 7760 Color Laser Printer

Index-5

Index

setting the default output tray, 3-48

TekColor tab, 3-25

UNIX, 2-9

Windows 2000 or later, 2-10

Windows 98 SE or later, 2-10

Xerox Support Centre, 1-14

printing

2-sided, 3-31

automatic 2-sided, 3-30

basics, 3-2

binding edge options, 3-31

custom size paper, 3-45

envelopes, 3-36

glossy paper, 3-40

labels, 3-38

Layout tab, 3-25

margins, 3-6, 3-8

on both sides of the paper, 3-30

options

Macintosh, 3-27 selecting, 3-25, 3-27

Windows, 3-25

Output Options tab, 3-25

Paper Quality tab, 3-25

safety guidelines, A-4

selecting 2-sided, 3-31

selecting individual job printing options

Macintosh, 3-27

Windows, 3-25

selecting options, 3-24

selecting output options, 3-48

selecting printing preferences

(Windows), 3-24

TekColor tab, 3-25

transparencies, 3-33

two-sided pages, 3-30

PrintingScout alerts, 6-23

print-quality mode

enhanced, 4-2 photo, 4-2 standard, 4-2

print-quality problems

all colors too light or too dark, 4-14

blacks appear blue, 4-12

color settings not applied, 4-16

colors align incorrectly, 4-9

colors do not match, 4-15 colors vary between computers, 4-15

dark lines, smudges, or streaks, 4-7

fusing incomplete, 4-10

grays not neutral, 4-14

light or dark lines in one color, 4-6

marks or voids appear regularly on the page, 4-8

poor transparency, 4-13

repeating defects, 4-8

solid fills mottled or blotchy, 4-12

R

recycling supplies, 5-15

registering your printer, 6-24

repacking the printer, 5-16

repeating defects, 4-8

resolution

maximum (dpi), 1-6

router address

IP address, 2-6

routine maintenance items, 5-14

S safety

electrical, A-1

laser, A-2 maintenance, A-2

operational, A-3

printing guidelines, A-4

symbols, A-6

user, A-1

sample pages

printing, 1-11

selecting

2-sided printing, 3-31

a print-quality mode, 4-2

hole punching, 3-52

hole punching options, 3-51

output options, 3-48

printing options, 3-24

printing options for an individual job

Macintosh, 3-27

Windows, 3-25

printing preferences (Windows), 3-24

stapling from the printer driver, 3-51

setting

printer’s IP address dynamically, 2-6

printer’s IP address manually, 2-8

the printer’s IP address automatically

(Windows only), 2-5

setting up the network, 2-2, 2-3

Phaer® 7760 Color Laser Printer

Index-6

Index

solving print-quality problems, 4-5

specialty media, 3-33

custom size paper, 3-45

envelopes, 3-36

glossy paper, 3-40

labels, 3-38

transparencies, 3-33

standard print-quality mode, 4-2

stapler, 3-50

adding booklet staples, 5-9

adding staples, 5-6

options, 3-50

selecting stapling from the printer driver, 3-51

staple orientation, 3-50 supported paper types, 3-50

staples

adding, 5-6

supplies, A-4

ordering, 5-14

recycling, 5-15

when to order, 5-14

Support Centre, 1-14

supported paper and media, 3-3, 3-5 supported paper sizes and weights, 3-5

Tray 1 (MPT), 3-6, 3-8

symbols marked on product, A-6

T

TCP/IP addresses, 2-5

technical support, 1-13

TekColor correction

automatic, 4-3 office color, 4-3

toner

missing from the print or is easy to rub off, 4-10

transfer roller

ordering supplies, 5-14

transparencies, 3-33 guidelines, 3-33

printing from Tray 1 (MPT), 3-34

printing from Trays 2-n, 3-35

Tray 1 (MPT)

loading paper, 3-9

manually feeding paper, 3-16

paper and media types, 3-6

paper jam, 6-7

printing envelopes, 3-37

printing glossy paper, 3-41

printing labels, 3-39

printing transparencies, 3-34

supported paper sizes and weights, 3-6

Tray 2 trays

custom size printing, 3-46

additional, 1-7

offsetting output, 3-49

options, 1-7

setting the default output tray, 3-48

Trays 2-5

supported paper sizes and weights, 3-8

Trays 2-n

loading paper, 3-17

printing transparencies, 3-35

Trays 3-n

paper jam, 6-14

troubleshooting

all colors too light or too dark, 4-14

color settings not applied, 4-16

colors align incorrectly, 4-9

colors do not match, 4-15 colors vary between computers, 4-15

dark lines, smudges or streaks in all colors, 4-7

fusing incomplete, 4-10

grays not neutral, 4-14

light or dark lines in one color, 4-6

PANTONE colors do not match, 4-16

paper jams, 6-2

PhaserSMART, 1-13

print image is offset, 4-11, 4-12

printed area does not fit on the paper, 4-17

printed colors do not match monitor colors, 4-16

print-quality, 4-5

repeating defects, 4-8

technical support, 1-13

turning off the printer, A-5

two-sided printing, 3-30 automatic, 3-30

binding edge options, 3-31 selecting, 3-31

Phaer® 7760 Color Laser Printer

Index-7

U

unacceptable paper and media, 3-4

usage guidelines

paper, 3-3

USB connection, 2-3

user safety, A-1

using host names with Domain Name Service

(DNS), 2-7

W

warning and error messages, 6-23

waste cartridge

ordering supplies, 5-14

waste punch box

emptying, 5-12

web links, 6-24 website resources, 6-24

Windows

install printer drivers for Windows 2000 or later, 2-10 install printer drivers for Windows 98 SE or later, 2-10

manual feed, 3-16

printing options, 3-25 selecting printing options for an individual job, 3-25

Xerox Support Centre, 1-14

Windows PostScript driver, 2-9

X

Xerox

supplies recycling programs, 5-15

supplies website, 5-14

Support Centre, 1-14

website resources, 6-24

Phaer® 7760 Color Laser Printer

Index-8

Index

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents