Lavamat 86760 User Manual - Eurohome Kitchens and Appliances

Lavamat 86760 User Manual - Eurohome Kitchens and Appliances

ÖKO-LAVAMAT 86760 update

The environmentally friendly washing machine

User information

Dear Customer,

Please read this user information carefully.

Pay particular attention to the section "Safety" on the first Info pages.

Please keep this user information in a safe place for later reference.

Pass it on to any future owners of the unit.

1

The warning triangle and /or signal words (Warning!, Caution!, Impor-

tant!) emphasise information which is important for your safety or for the unit's functional reliability. It is imperative that this information is observed.

0 1. This symbol guides you step by step through the operation of the appliance.

2. ...

3

Next to this symbol you will find additional information and practical tips on using the appliance.

2

Tips and information on economical and environmentally responsible use of the unit are identified with the clover leaf.

For any faults which occur, this user information contains information on how to remedy these faults yourself. See the section "What to do if ..."

2

Printed on recycled paper.

Thinking ecologically means acting ecologically.

Contents

Operating Instructions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Environmental Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Unit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Drawer for detergent and care agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programme Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programme Option Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Consumption Values and Programme Times . . . . . . . . . . . . . . . . . . . . . . 14

Wash Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What does “UPDATE” mean? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Anti-flood system Aqua Control + Aqua Alarm . . . . . . . . . . . . . . . . . . . 15

Before the First Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Preparing a Wash Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Sorting and preparing a wash load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Washing Types and Care Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Washing Detergents and Care Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Which washing detergent and care agent? . . . . . . . . . . . . . . . . . . . . . . 18

How much washing detergent and care agent? . . . . . . . . . . . . . . . . . . . 18

Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Running a Wash Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting the wash programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Changing Spin Speed /selecting RINSE HOLD . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the delay timer/soaking duration . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Opening and closing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Loading the Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Add detergent/conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Starting the wash programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3

4

Washing Programme Progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Washing cycle complete/Removing the washing . . . . . . . . . . . . . . . . . . . . 27

Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Separate Rinse/Conditioning/Starching/Treating . . . . . . . . . . . . . . . . . . . . 29

Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Detergent Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Washing Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Main door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Remedying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Carrying out emergency drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Emergency unlocking of the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Additional Rinse RINSE+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Water Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Additional Rinse and Water Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Variomatic Loose Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Programme Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Child Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Installation and connection instructions

. . . . . . . . . . . . . . . . 45

Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Compensate for floor unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Water inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Delivery heads over 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Warranty conditions / Customer service centres

. . . . . . . 54

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Service

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

5

6

Operating Instructions

Operating Instructions

1

Safety

The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. However, as manufacturers we regard it as our responsibility to inform you about the following safety instructions.

Before Using for the First Time

• Refer to the "Installation and Connection Instructions" further on in this user information.

• If units are delivered in the winter months at minus temperatures:

Store the washing machine at room temperature for a few hours before putting it into operation.

Correct Use

• The washing machine is only intended for washing normal domestic washing. If the appliance is used for a wrong purpose or wrongly operated, the manufacturer cannot assume any liability for any damages.

• Additions or modifications to the washing machine are strictly forbidden due to safety reasons.

• Use only detergent which is suitable for washing machines. Refer to the detergent manufacturer's instructions.

• The washing must not contain any flammable solvents. Also bear this in mind when washing pre-cleaned washing.

• Do not use the washing machine for dry-cleaning.

• Dyes /dye-removing agents may only be used in the washing machine if the manufacturer expressly permits use of these products. We cannot accept liability for any damage.

• Use only water from the water mains. Use rain water or service water only if it meets the requirements defined in DIN 1986 and DIN 1988.

• Frost damage is not covered by the warranty! If the washing machine is in a room subject to possible frost hazards, emergency emptying must be carried out if there is a risk of frost (see the Section "Carrying out emergency emptying“).

Operating Instructions

Safety of Children and Infirm Persons

• Packaging materials (e.g. films, polystyrene) can be dangerous for children. Risk of suffocation! Keep packaging away from children.

• The appliance is not intendet for use by young children or infirm persons without supervision.

• Children frequently cannot recognise hazards involved in handling electrical appliances. Therefore, ensure that they are properly supervised during operation and never allow children to play with the washing machine -there is a risk that they can lock themselves inside it.

• Ensure that children or small animals do not climb into the washing machine's drum.

• When disposing of washing machines pull out the mains plug, destroy the door lock, cut off the electrical supply lead and dispose of the plug and remaining cable. This means that playing children cannot shut themselves in and cannot encounter a potentially lethal hazard.

General Safety

• Repairs to washing machines may only be carried out by skilled persons. Improper repairs can cause significant hazards for the user.

If your appliance needs repairing, please contact customer service or your dealer.

• Never put the washing machine into operation if the mains cable is damaged or if the control panel, work top or base area is damaged in such a way that the inside of the appliance is openly accessible.

• Before cleaning, care and maintenance work, switch off the washing machine. Also, pull the mains plug out of the socket, or - in the case of permanent connection - switch off the LS switch in the fuse box or completely unscrew the screw-in fuse.

• If operation is stopped, disconnect the appliance from the mains supply and shut off the tap.

• Never pull the mains plug out of the socket by the cable. Always use the plug.

• Multiple connectors, couplings and extension cables must not be used. Fire hazard through overheating!

• Do not spray down the washing machine with a water jet. Danger of electrical shock!

• The glass in the filling door become hot when high-temperature washing programmes are used. Do not touch!

7

Operating Instructions

• Allow the washing solution to cool down before performing and emergency emptying of the appliance, before cleaning the solution pump or before an emergency opening of the filling door.

• Small animals can chew on power cables and water hoses. This can cause a danger of electric shock and water damage. Keep small animals away from washing machines.

2

Disposal

Disposing of the Packaging Material!

Dispose of the packaging of your washing machine correctly. All pakkaging materials used are environmentally-compatible and recyclable.

• Plastic parts are identified with internationally standardised abbreviations:

>PE< for polyethylene, e.g. packing films.

>PS< for polystyrene, e.g. cushion parts (always CFC-free)

>POM< for polyoxymethylene, e.g. plastic clips.

• Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.

Disposing of your old appliance!

When you put your unit out of operation one day, please bring it to your nearest recycling centre or to your dealer.

8

2

Environmental Tips

• You do not need to use a pre wash cycle or soak for washing with average soiling. This saves detergent, water and time (and protects the environment).

• When loaded to the capacities indicated the washing machine is especially efficient.

• For small loads, use only one half to two thirds of the recommended quantity of detergent.

• By pre-treating stains and marks you will be able to wash at a lower temperature.

• It is often possible to wash without using softener. Give it a try! If you use a drier, your washing will be soft and fluffy even without a softener.

• For medium to high water hardness (from hardness range II, see “Detergents and Conditioners”) you should use water softener. The detergent can then always be dosed as for hardness range I (= soft).

Operating Instructions

Unit description

Front view

Drawer for detergent and conditioner

Control panel

Rating plate

(behind filling door)

Filling door

Screw feet

(height-adjustable); rear left: Automatic adjustment foot

Flap in front of the drain pump

Drawer for detergent and care agent

Stain removers

Main wash detergent

(powder form) and possibly water softener

Pre-wash detergent/ soaking agent or water softener

Liquid care agents

(conditioner, finisher, starch)

9

10

Operating Instructions

Control Panel

Spin speed/

RINSE HOLD button

Additional Programme-

Options

Program

Progress-Display

DOOR/LIGHT button

Programme Selector

Multi display START/

PAUSE

Button

DELAY TIMER Button

OVERDOSING indicator

Programme Selector

The programme selector defines the nature of the wash cycle (e.g. water level, drum movement, number of rinses, spin speed) to suit the type of washing, as well as the water temperature.

OFF

Switches the washing machine off; the machine is switched on at all other positions.

To correct programme settings that have been selected accidentally turn the programme selector to the OFF position. The initial position is reinstated.

Operating Instructions

COTTONS/LINEN, EASY-CARES

Wash programme between 20 °C and 95 °C, may be used for all cotton and linen washing (cottons/linen), easy-cares (blended fabrics, e.g., cotton/polyester) and synthetics. The wash programme adjusts to suit the various types of fabric and quantities. If there is mostly cotton/linen a suitable cottons/linen programme is carried out; if there is more synthetic material a programme for easy-cares is selected. If the machine is loaded exclusively with easy-cares the quantity should not exceed

2.5 kg in order to avoid creasing.

STARCHING

Separate starching, separate rinsing, separate conditioning or separate soaking of damp washing (1 rinse, liquid conditioner is added from the compartment

æ, spin).

If a separate rinse is carried out do not put any conditioner into the compartment.

DRAIN

The water is pumped away after a rinse hold (without spin).

3

Rinse hold means: the washing remains in the last rinsing water and is not spun.

SPIN

The water is pumped out at the end of a rinse hold and spin, or hand washed cottons/linen and easy cares are spun separately.

SHORT SPIN

The water is pumped out at the end of a rinse hold and short spin, or delicate fabrics (delicates, woollens) are given a separate short spin at low revs.

DELICATES

Wash programme for delicates at 30 °C or 40 °C.

WOOL /

P Hand wash

Wash programme (cold to 40 °C) for machine-washable woollens and for hand-washable woollen fabrics bearing the

ï care symbol (hand wash).

SILK /

P Hand wash

Wash programme at 30 °C for hand and machine-washable silk.

3

As silk is a very sensitive fabric, we recommend that you only wash one item of clothing at a time, and that such items never be washed with other rough fabrics. A still more gentle wash is possible for extremely sensitive silk fabrics using the TIME SAVER button.

11

Operating Instructions

FASHION

A particularly gentle special programme at 40 °C for modern fabrics such as viscose, modal, cupro, lyocell, with a gentler wash action than the DELICATES programme, but washing more thoroughly than the hand wash programmes.

REFRESH

A special programme lasting approx. 20 minutes at 30 °C to give fabrics a quick wash, such as, for example, very slightly soiled sports clothes that have been worn only once.

EASY IRON

Wash programme at 40 °C for easy-care fabrics that will only need to be ironed lightly, if at all, at the conclusion of the programme.

2

ENERGY SAVING

A wash programme at approx. 60 °C that is particularly economical on electricity and water for slightly to normally soiled cotton and linen washing (cottons/linen) with an extended washing time.

12

Programme Option Buttons

The programme option buttons are used to adapt the programme to suit the degree of soiling of the wash. The additional PRE WASH and STAIN options are not needed for normally soiled washing. The different functions can be combined together, depending on the programme.

PRE WASH (Pre-wash/Soaking)

Cold pre-wash before the main wash cycle, which follows automatically. The DELAY TIMER button changes Pre-wash to warm soaking.

SENSITIVE

Special extra programme function that gives an extra rinse along with better fabric care (less drum movement). This is ideal when frequent washes are necessary, for example in cases of sensitive skin. RINSE+ can still be selected as well.

STAIN

For heavily soiled or stained washing. (In-wash stain treatment products (powder or tablets) are washed in at the optimum time as the programme progresses.)

3

With the WOOL/

P (Handwash) setting, the additional programme option buttons cannot be used.

Operating Instructions

TIME SAVER

Shortened wash programme for lightly soiled washing, consisting of three stages with the COTTONS/LINEN, EASY-CARES programme and two stages with the other programmes.

Programme

Length of programmes

Without

TIME SAVER

With TIME SAVER

Button pressed once

Button pressed twice

COTTONS/LINEN,

EASY-CARES at 60 °C

Other programmes, for example DELICATES at 30 °C

119 mins.

68 mins.

91 mins.

52 mins.

63 mins.

-

Programmable functions

The programmable functions Extra Rinse (RINSE+), Water Cooling and

Variomatic Spin are described in the Chapter “What to do if ...”.

13

14

Operating Instructions

Consumption Values and Programme Times

The following table gives the values for selected programmes under standard conditions. Consumption values depend on the selected programme settings (optional functions), washing type and quantity, water pressure, such as water inlet temperature, water hardness, room temperature or detergent used, etc. The tables do, however, give a helpful guide for normal household use.

Programme Selector

(Temperature)

Type of material

Load in kg

Water in litres

Energy in kWh

Time in minutes

ENERGY SAVING

1)

COTTONS/LINEN, EASY-CARES 95

COTTONS/LINEN, EASY-CARES 60

Cotton

Cotton

Cotton

Cotton

6

6

6

6

42

50

50

58

1.02

2.05

1.08

0.66

120

COTTONS/LINEN, EASY-CARES 40

COTTONS/LINEN, EASY-CARES 60

TIME SAVER (press once)

1)

COTTONS/LINEN, EASY-CARES 40

TIME SAVER (press once)

1)

COTTONS/LINEN, EASY-CARES 40

TIME SAVER (press twice)

Synthetics

Synthetics

Synthetics

3

3

3

56

52

50

0.95

0.55

0.58

91

88

59

DELICATES 30

WOOL /

P (Handwash) 30

Synthetics 3

2

56

42

0.36

0.18

68

35

1) Note:Programme setting for testing in accordance with or in support of Standard EN 60 456 and IEC 60 456.

148

119

116

Wash Time Display

3

The wash times for the wash programmes depend on the usual washing practice and the ambient conditions at the place of installation. The washing type and quantity, the type of washing detergent, the water temperature and the room temperature etc. can influence the duration of the wash programme.

Operating Instructions

What does “UPDATE” mean?

The wash programmes in your washing machine are controlled by software.

New types of fabric or new detergents may require new wash programmes in the future. In most cases, the software can be adapted to this.

For further information on a possible “update” please contact customer service.

Anti-flood system Aqua Control +

Aqua Alarm

In the event of damage to the supply hose, the system blocks the further supply of water to the unit directly st the water tap.

If water escapes at another point, the drainage pump pumps the water off automatically - even if the unit is switched on. It is merely necessary for the washing machine to be connected to the mains. If the antiflood system responds, a warning signal sounds at the same time.

15

Operating Instructions

Before the First Wash

0 Run a wash cycle without washing; COTTONS/LINEN, EASY-CARES 95 programme with half the amount of washing detergent. This removes any residues from the drum and solution container which may have been left during manufacturing.

Preparing a Wash Load

16

Sorting and preparing a wash load

• Sort the washing according to care symbol (see “Washing Types and

Care Symbols”).

• Empty all pockets.

• Remove metal objects (paper clips, safety pins etc.).

• In order to prevent the washing tangling and being damaged: close zippers, button up duvet covers and pillow cases, and tie up loose straps such as from aprons.

• Turn articles with double layered fabric inside out (sleeping bags, anoraks etc.).

• In the case of knitted coloured fabrics and also wool and fabrics with jewellery attached: turn inside out.

• Place small and delicate articles (baby booties, stockings, bras etc.) into a washing net, a pillow case with zipper, or in large socks before washing.

• Handle curtains with particular care. Metal fittings or burred, plastic fittings must be removed or tied into a net or bag. We cannot accept liability for damage.

• Do not wash coloured and white washing together. This could transfer colour to white washing or turn it grey.

• New coloured items often have an excess of colour. It is better to wash such items separately the first time.

• Mix small and large items of washing. This improves the wash efficiency and the washing is more evenly distributed during the spin cycle.

• Shake out washing before placing into the washing machine.

• Do not place folded washing into the drum.

• Observe such washing instructions as “wash separately” and “wash separately several times”!

Operating Instructions

Washing Types and Care Symbols

The care symbols help you choose the correct wash programme. Washing should be sorted according to type and care symbol. The temperatures indicated in the care symbols are all maximum temperatures.

Cottons

ç

Fabrics made from cotton and linen with this care symbol will withstand maximum wash actions and high temperatures. The COTTONS/

LINEN, EASY-CARES programme is suitable for this type of washing.

Linen

è ë

Fabrics made from cotton and linen which carry this care symbol will withstand maximum wash actions. The COTTONS/LINEN, EASY-CARES programme is suitable for this type of washing.

Easy-care washing

ê í

Fabrics such as treated cotton, cotton mixed fabrics and synthetics which carry this care symbol need a gentler wash action. The COTTONS/

LINEN, EASY-CARES and EASY IRON programmes are available for this type of washing.

Delicates

ì

Fabrics such as those with layered fibres, microfibres, synthetics and curtains with this care symbol require particularly careful handling. The

DELICATES programme is appropriate for these types of washing.

Viscose

í ì

Modern fabrics such as viscose, cupro, lyocell, modal and others require particularly careful handling. The FASHION programme is appropriate for these types of washing.

Woollens, silk and particularly delicate wash items

9 ì ï

Fabrics such as wool, wool mixtures and silk which carry these care symbols require a very gentle wash cycle. The WOOL/

P Hand wash and

SILK/

P Hand wash programmes are suitable for this type of fabric.

Important! Fabrics which bear the care symbol

ñ (Do not wash!) may not be machine washed!

17

18

Operating Instructions

Washing Detergents and Care Agents

Which washing detergent and care agent?

Use only washing detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions.

How much washing detergent and care agent?

The amount to be used depends on:

• the dirtiness of the washing

• the hardness category of the mains water supply

• the filling quantity

2

If the detergent manufacturer gives no details of the dosing quantities for minimum loads, add one third less for half loads and, in the case of very small loads and for EASY IRON, only half the amount of detergent recommended for a full load.

Refer to the detergent/care agent manufacturer's instructions on use and dosage.

Water softener

For medium to high water hardness (hardness class II upwards), you should use softener. Refer to the manufacturer's instructions. Then always add the appropriate amount of detergent for hardness class I

(= soft). The responisable water works will provide information on the local water hardness.

2

Since the water softener is rinsed in before the main detergent (water pre-softening), 80% of the stated quantity of softener shown on the package is sufficient.

Water hardness details

Hardness class

I - soft

II - medium hard

III - hard

IV - very hard

Water hardness in °dH

(German hardness scale)

0 - 7

7 - 14

14 - 21 greater than 21

Water hardness in mmol

(millimol per litre)

to 1.3

1.3 - 2.5

2.5 - 3.8

greater than 3.8

Operating Instructions

Running a Wash Cycle

Brief Instructions

A wash cycle consists of the following steps:

0 1. Set the correct wash programme:

– select the programme and temperature using the programme selector

– if required, select programme option

2. If required change the spin speed/select rinse hold.

3. If required, set the DELAY TIMER.

4. Open the door and load the washing.

5. Close the door.

6. Add detergent/conditioner.

7. Start the wash programme by pressing the START/PAUSE button.

When the wash programme has ended:

Important! If the wash cycle has ended with a rinse hold, activate

DRAIN, SPIN or SHORT SPIN before opening the door.

8. Open the door and remove the washing.

9. Switch off the washing machine: set the programme selector to OFF.

19

20

Operating Instructions

Setting the wash programme

3

For suitable programme, correct temperature and possible additional programs for the respective type of washing, see „Programme tables“.

0 1. With the programme knob, set the desired wash programme and temperature.

In the multi-display the probable duration of the set programmes will be shown in minutes.

2. If necessary, press additional programme button(s):

The display of the selected additional programme is displayed.

– For changing to another selection, press another button.

– For resetting, press button again.

Operating Instructions

Changing Spin Speed /selecting RINSE HOLD

0 To change Spin Speed for the final spin (if necessary)/select RINSE HOLD:

Press the Spin Speed/RINSE HOLD button as often as necessary, until the indicator light for the desired speed (or RINSE HOLD) is lit.

If RINSE HOLD is selected, the washing is left to soak in the last rinse water, without spinning.

3

If the Spin Speed is not changed, the final spin is automatically adjusted to suit the washing programme:

– COTTONS/LINEN, EASY-CARES

– ENERGY SAVING

– DELICATES

– WOOL /

P (Handwash)

– SILK/

P (Handwash)

– FASHION

– EASY IRON

1600 revolutions per minute

1600 revolutions per minute

1200 revolutions per minute

1200 revolutions per minute

1200 revolutions per minute

1200 revolutions per minute

1200 revolutions per minute

The speed of intermediate spins depends on the selected programme, and cannot be changed.

21

22

Operating Instructions

Setting the delay timer/soaking duration

Delay timer

The DELAY TIMER button makes it possible to delay the start of a wash programme by 1 to a maximum of 19 hours.

0 1. Select wash programme.

2. Press DELAY TIMER button.

3. Press START/PAUSE button.

When start delay has been set, the DELAY

TIMER display lights up.

Depress the DELAY TIMER button until the desired start delay appears, e. g. 12h for a 12 hour delay to the start of the programme. If19h is displayed and the button is pressed again, then the delay timer is cancelled. The duration of the set wash programme will now appear in the display in minutes, e. g.120.

The set delay timer can also be cancelled it the programme selector is set to the OFF position.

Soaking duration

With depressed PRE WASH button, by pressing the DELAY TIMER button, the duration of soaking can be extended by 1 to a maximum of 19 hours.

0 1. Press the PRE WASH button.

2. Press DELAY TIMER button.

Soaking is set, the WASH TIME indicator illuminates.

The soaking time is now increased by 1 hour.

3. By repeated pressing of the DELAY TIMER button, the soaking times can be increased in steps of an hour.

The WASH TIME and DELAY TIMER displays light up.

Operating Instructions

Opening and closing the door

0

0

Open: Press the DOOR/LIGHT button. The door springs open.

Close: Press the door firmly closed.

When the unit is switched on, the DOOR/LIGHT display shows whether the door can be opened:

– green: The door can be opened (not when programming is activated, see the section "Programme protection“ for details)

– off:

Door cannot be opened

– red: Door is open

3

The washing drum is illuminated when the door is open. The light goes out automatically after approx. 3 minutes.

Loading the Washing

3

For maximum load, see “Programme Tables”.

See “Sorting and Preparing a Wash Load” for information on how to prepare washing correctly.

0 1. Sort and prepare the washing according to type and colour.

2. Open the door: Press DOOR/LIGHT button.

Door springs open.

3. Load the washing.

Important! Do not trap washing when closing the door. The fabrics and the appliance could be damaged.

4. Close the door firmly.

23

Operating Instructions

Add detergent/conditioner

3

For information concerning detergent and conditioners see the section

“Detergent and Conditioners”.

0 1. Open the detergent dispenser drawer: grasp the drawer at the flap at the bottom (1), and pull out the drawer to its full extent (2).

2. Add detergent/conditioner.

Compartment for in-wash stain treatment/tablets

Only for STAIN programme option.

Compartment for washing powder/ tablets for main wash

(If you use water softener and need the right compartment for the pre-wash detergent/soaking agent, add the water softener to the main wash detergent in this compartment.)

Compartment for liquid conditioner

(softener, finisher, starch)

Important! Do not fill compartment above the MAX mark.

Concentrated conditioner may need to be diluted up to the

MAX mark; dissolve starch powder.

Information: A small amount of residual water in the compartment for liquid conditioners is normal and will not affect the rinse results.

Compartment for pre wash detergent/soaking agent

Only for PRE WASH programme option

or for water softener.

3. Push the detergent dispenser drawer in fully.

24

3

If using liquid detergent/tablets:

Use the dispensing containers supplied by the detergent industry for adding liquid detergent or tablets. Follow the instructions on the detergent package.

Operating Instructions

Starting the wash programme

0 1. Check that the water tap is open.

2. Starting the wash programme: Press the

START/PAUSE button.

The wash programme is started or starts after the end of the time delay set.

3

If the DOOR/LIGHT indicator flashes red when pressing the START/

PAUSE button, then the door is not properly closed. Press the door firmly closed and press the START/PAUSE button again.

If a delay start has been set:

The delay time set counts down, the remaining time until the start of the programme is displayed in the multi display (in hours remaining).

During this time, you can add washing or change the delay time or cancel it.

• Adding washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping the delay time: Press the DELAY TIMER button until the desired time is displayed; when the duration of the programme is displayed (e. g. 120 minutes) the wash programme starts immediately.

25

26

Operating Instructions

Washing Programme Progress

Programme progress display

Prior to the start, the programme steps chosen are displayed by the Programme progress display.

During the washing programme the current programme step is displayed.

Multi display

The expected time remaining (in minutes) up to the end of the programme is shown in the Multi display.

3

The multi display indicates the estimated duration, in minutes, of the programme. These timings are estimates and can vary according to incoming water temperature, type and quantity of laundry, out of balance spin detection and foam detection. During the programme countdown, the remaining time can be recalculated due to any of the above factors.

Changing spin speed

During the washing programme, the spin speed can still be changed or

RINSE HOLD can be set.

Other settings cannot be changed.

0

Stopping the programme

Turn the progamme selector to OFF in order to stop the washing prematurely.

3

The programme can be interrupted at any time with the START/PAUSE button and can be continued again by pressing this button again.

Operating Instructions

Washing cycle complete/Removing the washing

Once the wash programme has come to an end the END indicator illuminates on the programme progress display.

• If the EASY IRON programme was selected, and anti-crease phase of approximately 30 minutes follows the programme end. Here, the multi display shows the remaining time and the END indicator illuminates. During the anti-creasing phase, the door can be opened at any time and the washing can be removed.

• If RINSE HOLD was selected, the display next to the

START/PAUSE button flashs.

0

1. After a rinse hold, the water must first be pumped out:

– Either press the START/PAUSE button (water is pumped out and the washing is spun according to the completed programme; using the

RINSE HOLD spin speed button, it is possible to change the spin speed during spinning), or

– Turn the programme selector to DRAIN and press the START/PAUSE button (the water is pumped off without spinning), or

– Turn the programme selector to SPIN or SHORT SPIN and press START/

PAUSE button (water is pumped out and the washing is spun accordingly).

After the end of this programme step, the END display lights up.

2. Open the door.

As soon as the indicator next to the DOOR/LIGHT button is green, the door can be opened (not if programme security is activated. For details see „Programme security„).

3. Remove the washing.

4. Turn the programme selector to OFF.

5. After washing, pull the washing detergent drawer out a little so that it can dry out. Leave the door ajar so that air can circulate in the drum.

3

If the display OVER DOSING lights up, too much washing detergent was used in the washing program just ended. During the next wash, pay attention to the dosing information of the washing detergent manufacturer and pay attention to the filling quantity!

Caution! If the washing machine is not used for a long time:

Close the water tap and disconnect the washing machine from the electricity mains. (Anti-flood system Aqua Control with Aqua Alarm does not function if the power supply is interrupted.)

27

28

Operating Instructions

Programme Tables

Washing

The tables do not show all the possible settings, only those most likely to be selected for everyday purposes.

Type of washing,

Care symbol

Cottons/Coloureds

3)

èç

Cottons/Coloureds

ë è ç

Max. Load

1)

(Dry weight)

2)

Programme selector

Temperature [in °C]

6kg

6kg

ENERGY SAVING 60

COTTONS/LINEN,

EASY-CARES

20 to 95

Possible

Programme options or functions

PRE WASH

SENSITIVE

STAIN

TIME SAVER

PRE WASH

SENSITIVE

STAIN

TIME SAVER

3kg REFRESH 30

Easy-Cares

3)

î í ê

3kg

1kg

COTTONS/LINEN,

EASY-CARES

20 to 60

EASY IRON

4)

40

PRE WASH

SENSITIVE

STAIN

TIME SAVER

PRE WASH

STAIN

TIME SAVER

Delicates

ì

3kg

3kg

(or 15-20m

2 net curtains)

3kg

REFRESH 30

DELICATES 30, 40

FASHION 40

PRE WASH

STAIN

TIME SAVER

Operating Instructions

Type of washing,

Care symbol

Max. Load

1)

(Dry weight)

2)

Programme selector

Temperature [in °C]

Possible

Programme options or functions

Wool/ Handwash

9 ì ï

Silk/Handwash

ï

2kg

1kg

WOOL/

P COLD to 40

SILK/

P 30

TIME SAVER

1) The load amount inquiry operates in accordance with the EN 60456 standard load.

2) A 10 litre bucket holds around 2.5kg of dry clothes (cotton).

3) Programme settings for testing in accordance with or in support of standard EN

60 456 and IEC 60 456, are described in the Chapter “Consumption Values and

Programme Times“.

4) Creasing can be largely avoided by keeping wash loads under 1kg (roughly 5 to 7 easy-care men's shirts).

Separate Rinse/Conditioning/Starching/Treating

Type of washing

Cottons/Coloureds

Wool/Handwash

Max. load

(dry weight)

6kg

2kg

Programme selector

STARCHING

STARCHING + TIME SAVER button

Separate Spinning

Type of washing

Cottons/Coloureds

Easy-Cares

Delicates

Wool/Handwash

Silk

Max. load

(dry weight)

6kg

3kg

3kg

2kg

1kg

Programme selector

SPIN

SHORT SPIN

29

30

Operating Instructions

Cleaning and Care

Control panel

0

Important! Do not use any furniture cleaning agents or aggressive cleaning agents in order to clean panel and control parts.

Wipe control panels with a damp cloth. When doing so, use warm water.

Detergent Drawer

The detergent drawer should be cleaned from time to time.

0 1. Pull the detergent drawer out as far as it will go.

2. Remove the detergent drawer by pulling sharply.

3. Take the conditioner insert out of the middle compartment.

4. Clean the conditioner insert under running water.

5. Clean the compartments with warm water from the rear side. It is best to use a flat brush.

6. Push on the conditioner insert as far as it will go so that it is securely in place.

Operating Instructions

7. Use a brush to clean the entire rinsing-in section of the washing machine, particularly also the nozzles on the top side of the rinsingin chamber.

8. Set the detergent drawer into the guide tracks and push in.

Washing Drum

0

The washing drum is made of stainless steel. Rusting foreign bodies in the washing can cause rust deposits on the drum.

Important! Do not clean the stainless steel drum with decalcifying agents containing acids, scouring agents containing chlorine or iron, or steel wool. Our Customer Service can provide suitable agents.

Remove any rust deposits on the drum using a stainless steel cleaning agent.

Main door

0 Check on a regular basis to see if deposits or foreign objects are present in or at the rubber sleeve behind the door, and remove.

31

Operating Instructions

What to do if...

32

Remedying faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you use the Customer Service for one of the faults listed here or to remedy an operating error, the Customer

Service technician's visit will not be free of charge, even during the warranty period.

• If the fault code C1 or C2 is shown in the

Multi-display, you may be able to remedy the problem yourself (see the faults table below). When you have remedied the fault, press the START/PAUSE button.

• With all other displayed faults (C plus number or letter): switch appliance off and on again. Reset the wash programme and press the

START/PAUSE button.

If the fault code is displayed again, please contact the Customer Service department quoting the fault code.

Problem Possible cause Remedy

The mains plug is not plugged in.

Plug in the mains plug.

Washing machine does not work.

The house fuse has blown.

Door is not properly closed.

Replace the fuse.

Close door; Lock must engage audibly .

START/PAUSE button has not been pressed long enough.

Keep the START/PAUSE button pressed until the programme starts.

Door cannot be closed.

Water is not entering.

Error code

(1 appears.

Child safety feature is switched On.

Cancel child safety feature

(see section „Child safety feature“).

Open water tap.

Water tap is closed.

Filter in the socket of the inlet hose connection is blocked.

Close water tap. Disconnect hose from water tap, remove filter and clean under running water.

Water tap is blocked with limescale or is faulty.

Check the water tap and have it reaired if necessary.

Operating Instructions

Problem Possible cause Remedy

Transport packaging has not been removed.

Remove transport packaging according to setting up and connection instructions.

The machine is not level.

Adjust the feet according to installation and connection instructions.

Washing machine vibrates during operation or is unstable.

There is very little washing in the drum (e.g. only a dressing gown).

This does not affect the operation of the machine.

Water could not be fully pumped out before spinning because the drain hose is kinked or water pump is blocked.

Check the drain hose and remove any kink if necessary, or clean the drain pump and, if necessary, remove foreign bodies from the pump housing.

Excessive foaming during the main wash.

Probably too much detergent has been used.

If may be necessary to reduce the amount of detergent used. Follow the detergent manufacturer’s recommendations.

The screw Connection on the inlet hose is leaking.

Tighten the inlet hose screw connection.

Drainage hose is leaking.

Check the drain hose and replace it if necessary.

The drain pump cover is not correctly close.

Water leaks out of the washing machine.

Washing is caught in the door.

Close cover correctly.

Stop the programme, remove the washing caught in the door. Restart the programme.

The emergency emptying hose is not correctly closed or is leaking.

Close the emergency emptying hose (see section „Carry out emergency emptying“).

Call your local Service Force

Centre if the emergency emptying hose is leaking.

33

34

Operating Instructions

Problem Possible cause Remedy

The drain pump runs constantly - even when the appliance is switched off.

The Aqua Control anti-flood system has been activated.

Close the water tap, remove the mains plug and inform your local Service Force Centre.

Fabric softener was not rinsed in, compartment

æ for conditioners is filled with water.

The insert in the compartiment for conditioners is not correctly attached or is blokked.

Clean the detergent dispenser drawer and attach the conditioner insert correctly.

Washing is heavily creased.

The washing has not been spun as dry as usual.

The washing is not sufficiently spun. Water is left in the drum.

Error code

(2 appears

.

Probably too much washing has been put in drum.

Pay attention to the maximum load quantity (see programme tables). In the case of easy-care fabrics select the EASY IRON programme.

The washing was not able to be distributed evenly in the drum prior to spinning.

Always load the drum as ful as possible with a combination of large and small items.

Drain hose is kinked.

Maximum pump height

(emptying height 1m from base surface of the appliance) is exceeded.

Drain pump is blocked.

Remove the kink.

Contact your local Service

Force Centre. For pumping heights over 1 m a conversion kit is available as a special accessory.

Switch off appliance and pull out the mains plug. Clean the drain pump.

At the siphon connection: Siphon is blocked.

Clean siphon.

The door cannot be opened when appliance is switched on.

The door is locked for safety reasons (DOOR/LIGHT display is off).

The programme security function is On.

Wait until the DOOR/LIGHT display lights up green.

Cancel programme security

(see section „Programme protection“).

Operating Instructions

Problem Possible cause Remedy

Water tap is not fully opened.

Remnants of detergent are building up in the detergent drawer.

The inlet hose filter in the coupling of the inlet hose at the tap is blocked.

Open water tap fully.

Close the water tap. Unscrew the inlet pipe from water tap and from the appliance and clean the filter.

The rinse water is cloudy.

The cause is probably a detergent with a high silicate content.

No negative influence on the rinse results, use a liquid detergent if necessary.

When pressing a programme option button the corresponding display does not light up.

The selected programme option cannot be combined with the set programme.

Make another selection.

Programme cycledisplay flashes constantly.

Programme security is switched On; the programme selector has been moved during the wash cycle.

Turn programme selector to its original position (see

„Programme security“).

35

36

Operating Instructions

If the washing results are not satisfactory

If the washing has turned grey and if limescale is deposited in the drum, then

• Too little detergent was used.

• The wrong detergent was used.

• Special soiling was not pre-treated.

• Program or temperature not set correctly.

• If multi-component detergents are used, the individual components were not used in the correct ratio.

If there are still grey spots on the washing,

• Washing soiled with ointments, grease or oils was washed with too little detergent.

• Too lower temperature was used for washing.

• A frequent cause is that softener - particularly that in concentrated form - has reached the washing. Wash out such spots quickly and use the softener concerned carefully.

If at the end of the last rinse foam is still visible

• Modern detergents can also cause foam in the last rinse. However, the washing is still sufficiently rinsed.

If there are white remnants on the washing

• These are insoluble components of modern detergents. They are not the result of an insufficient rinsing effect.

Shake or brush out the washing. In future, perhaps you should turn the washing inside out before washing it. Examine your choice of detergent and if necessary use liquid detergent.

Operating Instructions

Carrying out emergency drainage

• If the washing machine no longer pumps off the washing solution, emergency drainage must be performed.

• If the washing machine is in a room where there is a risk of frost, emergency drainage must be performed if there is a possibility of frost.

In addition: unscrew the inlet hose form the water tap and place it on the floor. Empty the drainage hose.

1

Warning! Switch off the washing machine before performing emergency drainage and pull out the mains plug.

Caution! The washing solution escaping from the emergency drainage hose may be hot. There is a risk of scalding! Allow the washing solution to cool down before performing emergency drainage.

0 1. Place a flat collecting vessel in order to collect the washing solution which is draining off.

2. Fold open the flap in the right section of the base outwards and pull it off.

3. Remove the emergency drainage hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency drainage hose by turning it anticlockwise and pull it out.

The washing solution runs out. Depending on the amount of solution, it may be necessary to empty the collecting vessel several times. To do this, close the emergency drainage hose temporarily with the plug.

37

38

Operating Instructions

When the water is completely drained:

6. Push the plug securely into the emergency drainage hose and turn it clockwise to secure it.

7. Replace the emergency drainage hose in its holder.

8. Put on the flap and close.

Drain pump

The drain pump is maintenance free. The cover of the drain pump must only opened in the event of a malfunction when no more water is being pumped out, e.g. if the pump is blocked.

Before loading the machine, please always ensure that there are no foreign objects left in the pockets or in between the items to be washed.

Paper clips, nails etc. which may find their way into the washing machine along with the washing will remain in the drain pump housing.

To restart the drain pump when it is blocked, please proceed as follows:

1

Warning! Switch off the washing machine and remove the mains plug before cleaning the drain pump!

0 1. First carry out an emergency emptying procedure (see section “Carrying out emergency emptying”).

2. Place a cloth on the floor in front of the cover of the drain pump.

Residual water may run out.

3. Unscrew the drain pump cover in an anti-clockwise direction and pull it out.

4. Remove any foreign objects and fabric lint from the pump housing.

Operating Instructions

5. Replace the pump cover. Laterally insert the webs on the cover into the guide slots and screw on the cover in a clockwise direction.

6. Close the emergency emptying hose and place it in the holder.

7. Close the flap.

Emergency unlocking of the door

If the filling door can no longer be opened, it can be opened with the aid of the emergency unlocking facility.

1

Warning! Switch off the washing machine before operating the emergency unlocking and remove the plug from the mains!

0

1. If water is visible in the door's window, first perform emergency emptying (see the section "Carrying out emergency emptying“).

2. Open the flap downwards in the right part of the base panel.

3. Turn the rotary knob clockwise using a coin. The filling door springs open.

39

40

Operating Instructions

Additional Rinse RINSE+

The washing machine is set for very economical water consumption.

However, for persons who suffer from allergies to detergents, it can be helpful to rinse with extra water.

3

If this function is set, an additional rinse cycle is carried out for the

COTTONS/LINEN, EASY-CARES, EASY IRON and DELICATES programmes.

When the appliance is supplied from the factory, the additional rinse function is not set.

Setting the additional rinse function:

0

1. Turn the programme selector to SHORT SPIN.

2. Press the SENSITIVE button for at least 5 seconds. After the button has been pressed for 5 seconds, RINSE

+

will flash in the programme progress display for 5 seconds.

3. While RINSE

+

is flashing, release the SENSITIVE button. Once the flashing has stopped, the additional rinse has been set. It will remain set until it is cancelled again. When the additional rinse has been set, the

RINSE

+

indicator in the programme progress display is illuminated before the programme starts and during the additional rinse.

4. If you wish to check whether the additional rinse is set:

– Turn the programme selector to SHORT SPIN.

– Press the SENSITIVE button briefly.

If RINSE

+

flashes in the programme progress display the additional rinse has been set.

Cancelling the additional rinse:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the SENSITIVE button for at least 5 seconds.

Immediately the button is pressed RINSE

+

will flash in the programme progress display. After 5 seconds RINSE

+

will stop flashing and remain constantly illuminated for a further 5 seconds.

3. While RINSE

+

is constantly illuminated, release the SENSITIVE button.

Once RINSE

+

is no longer illuminated the additional rinse has been cancelled.

3

An additional rinse cycle increases water consumption and the programme duration.

Operating Instructions

Water Cooling

It may be necessary to cool down the water before pumping it out in order to prevent thermal damage to the plastic drainage pipes.

3

The water is cooled down before pumping out at the end of the main wash cycle (by adding cold water). This setting only works on the

COTTONS/LINEN, EASY-CARES programme when the temperature is above 40 °C.

When the appliance is supplied water cooling is not set except for the

SENSITIVE programme option.

Setting the water cooling function:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the PRE WASH button for at least 5 seconds. After the button has been kept pressed for 5 seconds, MAIN WASH flashes on the programme progress display for 5 seconds.

3. Release the PRE WASH button while MAIN WASH is flashing. Once it has stopped flashing, the water cooling function is set. It remains set until it is cancelled again.

4. If you wish to check whether the water cooling function is set:

– Turn the programme selector to SHORT SPIN.

– Press the PRE WASH button briefly.

When MAIN WASH flashes in the programme progress display, the water cooling function is set.

Cancelling the water cooling function:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the PRE WASH button for at least 5 seconds. MAIN WASH flashes in the programme progress display as soon as the button is pressed. After 5 seconds MAIN WASH will stop flashing and remain constantly illuminated for 5 seconds.

3. While MAIN WASH is constantly illuminated, release the PRE WASH button. Once MAIN WASH is no longer illuminated, the water cooling function has been cancelled.

3

Water cooling increases water consumption and the programme duration.

Additional Rinse and Water Cooling

You can combine the additional rinse cycle with water cooling. Setting as for “Additional Rinse” and “Water Cooling”.

41

42

Operating Instructions

Variomatic Loose Spin

A spin function that can be set as an integrated part of the final spin.

The washing clings less to the drum wall and can be removed more easily. May be selected with COTTONS/LINEN, EASY-CARES.

Setting loose spin:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the STAIN button for at least 5 seconds.

After the button has been kept pressed for 5 seconds, END flashes on the programme progress display for 5 seconds.

3. Release the STAIN button while END is flashing. Once it has stopped flashing, the loose spin function has been set. It will remain set until it is cancelled again.

4. If you wish to check whether the loose spin function is set:

– Turn the programme selector to SHORT SPIN.

– Press the STAIN button briefly.

If END flashes in the programme progress display, the loose spin function has been set.

Cancelling loose spin:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the STAIN button for at least 5 seconds.

END flashes in the programme progress display as soon as the button is pressed. After 5 seconds END will stop flashing and remain constantly illuminated for 5 seconds.

3. While END is constantly illuminated, release the STAIN button. Once

END is no longer illuminated, the loose spin function has been cancelled.

Operating Instructions

Programme Protection

To safeguard a programme setting against unwanted changes (e. g. program selector turned, option buttons pressed etc.), you can set the programme protection. This prevents your washing being damaged.

3

It is possible to set or cancel the programme protection at any time during a programme.

Selecting programme protection:

0 1. Select the desired wash programme settings.

2. Press the START/PAUSE button to start the programme.

3. Press and hold down the PRE WASH and SENSITIVE buttons simultaneously for 5 seconds. The programme progress indicator will flash for

5 seconds; programme protection has been set.

3

As long as the programme protection is set, you cannot make any other settings. The door cannot be opened using the DOOR/LIGHT button.

Even after the wash cycle has finished you will need to cancel the programme protection before you can open the door.

If an attempt is made to change the selected settings during the wash cycle by activating a button, the programme progress display will flash for 5 seconds.

If you attempt to change the selected setting by turning the programme selector, the programme progress display will flash until the original setting of the programme selector is restored. The wash cycle is not influenced in either case.

3

The programme selector must be in its original position in order to cancel the programme protection.

0

Cancelling programme protection:

Press and hold down the PRE WASH and SENSITIVE buttons simultaneously for 5 seconds. The programme progress indicator flashes for

5 seconds and then remains illuminated constantly for 5 seconds. Programme protection has been cancelled.

43

44

Operating Instructions

Child Safety Feature

If the child safety feature is set, the filling door can no longer be closed and no washing program can be started.

0

Setting the child safety feature

Use a coin to turn the rotary knob on the inside of the filling door clockwise as far as it will go.

1

Warning! The rotary knob must not be in a vertical position after adjustment, otherwise the child safety feature is not active. The rotary knob must project as shown in the diagram

0

Cancelling the child safety feature

Turn the rotary knob anticlockwise as far as it will go.

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

• Do not tilt the washing machine onto its front or onto its right side

(viewed from the front). Electronic components can get wet.

• Check the washing machine for transport damages. A damaged unit must never be put into operation under any circumstances. In the event of damage, please contact your supplier.

• Ensure that all parts of the transport safeguard are removed and that the unit is splash protected, see "Removing transport safeguard".

Otherwise, the units or neighbouring furniture can be damaged when spinning.

• Always insert the plug into a correctly installed earthed socket.

• In the case of permanent connection: A permanent connection may only be made by an authorised specialist.

• Before putting the machine into operation, ensure that the mains voltage and current type shown on the unit's rating plate correspond with those at the place where the machine is being installed. The fuse rating is also found on the rating plate.

• Should work be carried out on the water supply installations in order to allow the machine to be connected properly to the water supply, this work must be carried out by an authorised installer.

• Should work be carried out on the mains supply in order to allow the machine to be connected properly to the electricity supply, this work must be carried out by an authorised electrician.

• The mains lead may only be replaced by the customer service or by an authorised electrician.

45

46

Installation and connection instructions

Installation of the appliance

3

Washing machines with curved panels are not suitable for installing under units.

Transporting the appliance

• Do not place the washing machine on its front or on its right side

(viewed from the front). Otherwise, electrical components can get wet.

• Never transport the unit without the transport safeguard. Do not remove the transport safeguard until the appliance is at the installation location. Transporting the unit without the transport safeguard can damage it.

• Lift the appliance neither by an open filling door nor by the base.

When transporting the unit with a sack trolley:

• Attach the sack trolley only at the side. The sack trolley shovel must not be longer than 24 cm, otherwise the float switch can be destroyed.

Remove transport packaging

Important! It is essential to remove the transport packaging before putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.

0 1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.

2. Pull both hose holders off the appliance with a strong pull.

Installation and connection instructions

3

The special spanner (A) and the caps (B) (2 each) and (C) (1 each) are supplied with it.

3. Remove the screw D, including the compression spring with the special spanner A.

4. Cover the hole with the cap C.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

5. Remove the two screws (E) with the special spanner (A).

6. Remove the 4 screws (F).

7. Remove the transit bar (G).

8. Screw the 4 screws (F) back in for safe keeping.

9. Close the 2 large holes with the caps (B).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

47

48

Installation and connection instructions

Prepare the installation place

• The installation surface must be clean and dry, free of floor polish residues and other greasy coatings so that the unit does not slip away. Do not use lubricants as a sliding aid.

• Installation on a high-veil carpet or floor tiles with soft sponge backs is not recommended because the standing safety of the appliance is then no longer ensured.

• By installation surfaces with small-format tiles, lay a conventional rubber mat underneath.

• Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but rather should always be compensated for by adjusting the screw feet.

• If, for space reasons, it is not possible to avoid setting up the unit directly next to a gas or coal-fired cooker: install a thermal insulation panel between the cooker and washing machine (85 x 57cm) which must have an aluminium film on the side against the cooker.

• The washing machine must not be set up in a room where there is a danger of frost. Frost hazard!

• Flexible feed and drain tubings may not be crinkled or squeezed.

Installation on a concrete base

If the unit is set up on a concrete base, for safety reasons it is essential to fit stand plates in which the washing machine is adjusted. The stand plates are available from Customer Service under the spare parts number 645 425 058.

Installation on vibrating floors

Where the floor vibrates, particularly in the case of wooden beam floors with pliable boards, securely screw a water-resistant wooden panel at least 15mm thick onto at least 2 floor planks. If possible, set up the unit in the corner of a room, as the wooden floor is optimally restrained there and is therefore least likely to be subject to resonance vibrations.

Installation and connection instructions

Compensate for floor unevenness

3

Automatic adjustment foot: The rear left foot of your washing machine is designed as a spring leg. This means that it guarantees that your unit will stand securely even at high spin speeds.

If, nevertheless, the washing machine is unstable during spinning, please proceed as follows:

0 1. Set the three adjusted feet at the nominal value of 10 mm. To do this, use the supplied special spanner to remove the transport safeguard.

If the automatically adjusting foot does not reach the floor:

2. Automatic adjustment foot (rear left) manually for extending the reqired dimension.

3. If necessary, check the setting with a spirit level.

Caution! Never use wood, card or similar underlays to level out minor floor unevenness. Instead, always adjust the adjustment foot.

49

Installation and connection instructions

Electrical connection

Details of the mains voltage, current type and required fuses can be found on the rating plate. The rating plate is located at the top above the filling door.

For permanent electrical connection within the electrical circuit, provisions must be made which allow for electrical disconnection of the appliance from the mains with a contact opening of at least 3 mm at all poles. Suitable devices include circuit breakers, fuses (threaded fuses must be entirely removed from the socket), ground fault circuit interrupters and contactors. Permanent connection may only be carried out by an authorised electrician.

;

This appliance complies with the following EC directives:

– The "Low Voltage Directive" 72/23/EU with changes

– The "EMC Directive" 89/336/EU with changes

Water connection

3

The washing machine has safety features which prevent back-contamination of the drinking water and which conform to the national regulations of the water authorities (e.g. for Germany: DVGW guidelines).

This means that additional protective measures in the installation are not necessary.

Important!

– Units for connecting to cold water must not be connected to hot water.

– Use only new hose sets for the connection.

50

Permissible water pressure

The water pressure must be at least 1 bar (= 10 N/cm

2

= 0.1 Mpa), maximum 10 bar = 100 N/cm

2

= 1 Mpa).

• If more than 10 bar: Connect a pressure-reduction valve upstream.

• If less than 1 bar: Unscrew the inlet hose on the unit side at the solenoid intake valve and remove the flow regulator (to do this, remove the filter with pointed pliers and take out the rubber washer behind).

Replace the filter.

Installation and connection instructions

Water inflow

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer

Service is permissible.

– Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control.

– Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.

Caution! Never cut into pieces in order to extend the hoses!

3

Sealing rings are supplied either in the plastic nuts of the hose screw connection or in the enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Caution!

– Do not lay the infeed hose vertically downwards. Instead, turn it to the right or left as shown in the diagram.

– Tighten the hose connection only by hand.

2. Connect the hose with the straight connection to a water tap with a R 3/4 (inch) screw thread.

Caution! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.

51

Installation and connection instructions

Water drain

0

The drainage hose can either be connected to a siphon or hung in a wash basin or discharge basin or a bath tub.

Only original hoses may be used for extensions (max. 3m laid on the floor and then up to 80cm high). Customer Service stocks drainage hoses in lengths of 2.7 and 4m.

Important! It is essential to lay the drainage hose without kinks.

Water drain-off inside a siphon

The grommet on the hose end fits all standard siphon types.

Secure the connection between the grommet and siphon with a hose clamp.

Water drain-off inside a basin

Important!

– Small basins are not suitable for drainage. Water could overflow!

– The end of the drainage hose must not be submerged in the pumped-out water. Otherwise, the water could be sucked back into the unit.

0

– When hanging in a wash basin or a bath tub, the drainage hose must be secured with the supplied attachable bend to prevent it slipping. The backsurge force of the escaping water could otherwise force the hose out of the basin.

Tie the bend to the tap or the wall using a piece of string.

52

Delivery heads over 1m

To pump off the washing / rinsing solution, every washing machine has a drain pump which carries liquids up to a height of 1m via the drainage hose, calculated from the machine's standing surface.

Please contact Customer Service for delivery heads of over 1m.

Technical data

Adjustment possibility

Filling quantity (program-dependent)

Area of use

Drum speed, spinning

Water pressure

Approx. +10 / -5mm max. 6kg

Domestic

See rating plate

1-10 bar (= 10 - 100 N/cm

2

= 0.1 - 1.0 Mpa)

Dimensions

(dimensions in mm)

53

54

Warranty conditions / Customer service centres

Warranty conditions / Customer service centres

Weitere Kundendienststellen im Ausland

In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden.

Further after-sales service agencies overseas

In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct.

Autres agences étrangères assurant le service après-vente

Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables. Vous pouvez les consulter sur place.

Otros puntos de Postventa en el extranjero

En estos países rigen las condiciones de nuestros representantes locales. las cuales pueden ser consultadas allí mismo.

Ulteriori uffici del servizio tecnico assistenza clienti all’estero

In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste condizioni possono essere esaminante sul luogo.

Serviços de assistência técnica no estrangeiro

Nestes países são válidas as condições de garantia dos concessionários locais, podendo aí ser consultadas.

További vevöszolgálati irodák külföldön

Ezekben az országokban a mi AEG vevöszolgálatainknál saját jótállási feltételek alkalmazhatók. A további adatokat kérjük közvetlenül szerezzék be.

U.A.E. Abu Dhabi

Universal Trading Company

P.O. Box 43 99

Tel.: 335331

Jordan

Jordan Household

Supply Co. Ltd.

P.O. Box 3/68

Amman/Tel.: 69 70 50

Malta

ITC

International Trading Company

White House Building

Mountbatte Street

Blata L-Bajda/Tel.: 220644

Egypt

Middle East Commercial

Center

P.O. Box 19

Kairo-Heliopolis

Tel.: 29917/31634

Kanada

EURO-LINE Appliances

Mauritius

Happy World Centre Ltd.

2150 Winston PARK Drive 20

Oakville, Ontario L6H 5V1

Tel.: 905 829 3980

P.O. 7 54

1 Chausee Street

Port Louis

Fax: 905 829 3985 Tel.: 25355

Australia

ANDI-Co Pty. Ltd

9 Kingston Town Close

Oakleigh VIC 3166

Tel.: (03) 9569 1235

Fax: (03) 9569 1450

Bahrain/Arabian Gulf

A.A. Zayani & Sons

P.O. Box 9 32

Bahrain

Tel.: 261060

Korea (South)

Core Incorp.

3/F Chewoo Bldg.

200 Nonhyun-Dong

Kangnam-Ku

Seoul

Telefon 82 2 549 89 61

Croatia

Electrolux D.O.O.

Suplova 7

10000 Zagreb

Tel.: 1 61 19512

Fax: 1 61 19513

Bulgaria

Electrolux Bulgaria E.O.O.D.

91 Levski Blvd.

1000 Sofia

Tel.: 2 806676

Fax. 2 980 5276

Kuwait/Arabian Gulf

Ali Al-Ghanim Est.

P.O. Box 10 83

Tel.: 5322463

Fax: 5242114

Cyprus

Hadjikyrlakos & Sons Ltd.

Prodromou 121

P.O. Box 21587

Nicosia 1511

Service Telephones:

Nicosia 02 481226

Limassol 05 562182

Larnaca 04 633929

Paphos 06 932 699

Estonia

Electrolux Estonia Ltd.

Mustamäe tee 24

EE0006 Tallinn

Tel.: (372) 6 650 090

Fax: (372) 6 650 092

Lebanon

Adib & Assaferi

P.O. Box 539

Tripoli

Latavia

Electrolux Latavia Ltd.

Terlaton Street 42/44

1011 Riga

Tel.: 371 2 297821

Fax: 371 2 821286

Hongkong

Wo Kee Services Ltd.

585-609 Castle Peak Road

Kwai Chung N.T.

Hongkong

Tel.: 2494 4000

Lthuania

Electrolux Lthuania

Verkui 29

2600 Vilnus

Tel.: 372 272 3326

Fax: 372 272 3366

Warranty conditions / Customer service centres

Namibia

AEG NAMIBIA (PTY) LIM-

ITED-Jeppe Street

Northern Industrial Area

Windhoek

Tel.: (061) 21-6082/4

Fax: (061) 217838

New Zealand

Euro-Life New Zealand Ltd.

Privat Bag

58 Symonds Street

Auckland

Tel.: (09) 525 2222

Nouvelle Caledonie

Socometra N.C.

B.P. 483

Nouman

Tel.: 275444

Oman

Moshin Haider Darwish

P.O. Box 1 35

Muscat

Tel.: 703743

Poland

Electrolux Poland Sp. zo.o.

ul. Domaniewska 41

02-034 Warszawa tel.: 022 874 33 33 fax: 022 874 33 00

Russia

Electrolux Russia Ltd.

16 Olympiysky prospekt

129090 Moscow

Tel.: (095) 937 7837

Fax: (095) 926 5513

55

56

Warranty conditions / Customer service centres

Israel

Electricity & Electronic

Services-Evis LTD.

19 Hataasia st.

Raanana,

Industrial area 43654

Tel: 972-9-7448118

Fax: 972-9-7603618 e-mail:[email protected]

Japan

Electrolux Japan Ltd.

Domestic Appliances Department

Maruzen Showa Warehouse

Building

Tookai 4-5-12, Ota-ku

143-006 Tokyo

Tel.: 0120-13-7117

Fax: 03-3790-5257

Malaysia

Arzbergh Engineering

No. 49A/B, Jalan Petaling

Utama 7

4600 Petaling Jaya

Tel.: 3 795 1084

Fax: 3 795 1082

Singapore

Arzbergh Engineering

19 Tanglin Road 06-07

Singapore 247909

Tel.: 65 7356572

Fax: 7351124

Saudi Arabia

Alia Trading Corporation

P.O. Box 4101

King Abdul Aziz Street

Riyadh

Tel.: 4645977

Al Nahas Est.

Musaidia Market I

P.O. Box 1 15 29

Jeddah

Tel.: 6606852

Slovenia

Electrolux Slovenia D.O.O.

Traska Ul. 132

1000 Ljubljana

Tel.: 61 1234 137

Fax: 61 1234 238

Thailand

OLYMPIA Thai Ltd.

44 Ratchadapisek Road

10320 Bangkok

Tel.: 2 513 6111

Fax: 2 513 2574

Hungary

Electrolux Lehel KFT

(AEG Div)

Erzsébet Királyné útja 87.

1142 Budapest

Tel.: 00361/467-3200

Slovakia Rep.

Electrolux Slovakia S.R.O.

Seberiniho 1

821 03 Bratislava

Tel.: 02 4333 4322, 4355

Fax: 02 4333 6976

USA

ANDI Co. Appl. Inc. East

65 Campus Plaza

Edison, New Jersey 0837

USA/Tel.: (201) 2258839

South Africa

AEG (Pty) Ltd.

55, 12th Road

P.O. Box 1 02 64

Kew/Johannesburg 2000

Tel.: 8069111

Syria

Masri & Shami

P.O. Box 24 96

Damascus

Tel.: 214080

57

58

Index

Index

A

Aqua Control . . . . . . . . . . . . . . . . . . . . .15

,

27

Automatic adjustment foot . . . . . . . . . . 9

,

49

C

Care agent . . . . . . . . . . . . . . . . . . . . . . . . 9

,

18

Child safety feature . . . . . . . . . . . . . . .32

,

44

Coloureds . . . . . . . . . . . . . . . . . . . . . . . .28

,

29

Conditioner . . . . . . . . . . . . 9

,

11

,

19

,

24

,

29

Correcting a programme . . . . . . . . . . . . . . 10

Cottons . . . . . . . . . . . . . . . . . . .11

,

17

,

28

,

29

Cottons/Linen, Easy-Cares . . . . . . . . . . . . . 28

Curtains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Customer Service . . . . . . . . . .15

,

31

,

32

,

59

D

Delay timer . . . . . . . . . . . . . . . . . . 10

,

12

,

22

Delicates . . . . . . . . . . . . . . . . . . . . . 11

,

17

,

28

Detergent . . . . . . . . . . . . . . . . . . 9

,

18

,

19

,

24

Detergent drawer . . . . . . . . . . . . . . . . . . 9

,

24

Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Drain pump . . . . . . . . . . . . . . . . . . . . . . . 9

,

38

E

Easy iron . . . . . . . . . . . . . . . . . . . . . . . . .12

,

28

Easy-cares . . . . . . . . . . . . . . . . . . . 11

,

17

,

28

Emergency drainage . . . . . . . . . . . . . . . . . . 37

Emergency unlocking . . . . . . . . . . . . . . . . . 39

Energy Saving Programme . . . . . . . . . .12

,

28

F

Fashion . . . . . . . . . . . . . . . . . . . . . . . . . .12

,

28

H

Handwash . . . . . . . . . . . . . . . . . . . . . . .11

,

29

I

In-wash stain treatment . . . . . . . . . . . . 9

,

24

L

Linen . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

,

17

Load . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

,

28

M

Multi-display . . . . . . . . . . . . . . . . . 10

,

32

,

59

O

Opening the door . . . . . . . . . .23

,

27

,

39

,

43

Over-dosed . . . . . . . . . . . . . . . . . . . . . . . . . 27

P

Pre-wash . . . . . . . . . . . . . . . . . 12

,

20

,

24

,

28

Pre-wash detergent . . . . . . . . . . . . . . . . 9

,

24

Programme option buttons . . . . . . . . 12

,

28

Programme progress display . . . . . . . . . . . .10

Programme protection . . . . . . . . . . . . 23

,

43

Pump out . . . . . . . . . . . . . . . . . . . . . . . . . . .27

R

Rating plate . . . . . . . . . . . . . . . . . . . 9

,

50

,

59

Refresh . . . . . . . . . . . . . . . . . . . . . . . . . 12

,

28

Rinse + . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Rinse hold . . . . . . . . . . . . . . . . . . . .11

,

21

,

27

Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Risk of frost . . . . . . . . . . . . . . . . . . . . . . 6

,

37

S

Sensitive . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Short spin . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Silk . . . . . . . . . . . . . . . . . . . . . . . . . .11

,

17

,

29 hand-washable . . . . . . . . . . . . . . . . . . . . .11

Soaking . . . . . . . . . . . . . . . . . . . . . . . . . 12

,

22

Soaking agent . . . . . . . . . . . . . . . . . . . . . . .24

Softener . . . . . . . . . . . . . . . . . . . . . . . . . 8

,

24

Spinning . . . . . . . . . . 11

,

19

,

21

,

23

,

26

,

29

Stain . . . . . . . . . . . . . . . . . . 9

,

12

,

20

,

28

,

36

Starching . . . . . . . . . . . . . . . . . . . . . . . . 11

,

29

T

Time Saver . . . . . . . . . . . . . . . . . . . . . . . 13

,

28

U

Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

W

Warranty . . . . . . . . . . . . . . . . . . . . . . 6

,

32

,

54

Wash time . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Washing powder . . . . . . . . . . . . . . . . . . 9

,

18

Water hardness . . . . . . . . . . . . . . . . . . . . . . . 8

,

18 pumping out . . . . . . . . . . . . . . . . . . . 11

,

27 softener . . . . . . . . . . . . . . . . . . 8

,

9

,

18

,

24

Water Cooling . . . . . . . . . . . . . . . . . . . . . . .41

Wool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Woollens . . . . . . . . . . . . . . . . . . . . . . . . 11

,

17 hand-washable . . . . . . . . . . . . . . . . . . . . .11

Service

Service

In the chapter "What to do if...“ , some faults are listed which you can remedy yourself. Look there first if a fault occurs. If you do not find any information there, please consult your Customer Service. (You can find the addresses and telephone numbers in the section "Customer Service

Centres“.)

Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is necessary.

Note the PNC number and S. number. You will find both on the rating plate on the inside of the door of your washing machine.

PNC .....................................................

S. No. .....................................................

Answer as precisely as possible:

• What form does the fault take?

• Under what circumstances does the fault occur?

• Does the multi display show an error message?

When do you incur costs even during the warranty period?

– If you could have remedied the fault yourself with the aid of the fault table (see the section "What to do if..."),

– If several journeys by the customer service technician are necessary because for example he did not receive all the important information before his visit and must collect spare parts. These multiple trips can be avoided if you prepare your phone call as described above.

59

From the Electrolux Group. The world´s No.1 choice.

The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

AEG Hausgeräte GmbH

Postfach 1036

D-90327 Nürnberg http://www.aeg.hausgeraete.de

© Copyright by AEG

822 943 585-01-170403-01 Subject to change without notice

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents

Languages