- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- User manual
advertisement
◉
Touch to zoom
Standard Charger USER MANUAL Instructions for Use C-203 1) Place 2 or 4 AA size batteries into the battery compartment. Batteries must be inserted properly for good electrical contact and correct polarity direction. 2) Plug the charger into the wall AC outlet. The red LED indicator light will glow to indicate a normal charging mode. 3) For each charging period of 18-20 hours is completed, disconnected the charger from the mains and remove the batteries. 4) Do not overcharge the batteries beyond the recommended charging time (20 hours), otherwise it will shorten the lifespan of the batteries. For 2 or 4 AA batteries CO) $ IPN PowerBase PowerBase o o E D UL BS 2 cells NOTE : Never put Ni-MH and Ni-Cd batteries together in the PowerBase Rapid Charger Standard Charger USER MANUAL Instructions for Use C-203 1) Place 2 or 4 AA size batteries into the battery compartment. Batteries must be inserted properly for good electrical contact and correct polarity direction. 2) Plug the charger into the wall AC outlet. The red LED indicator light will glow to indicate a normal charging mode. 3) For each charging period of 18-20 hours is completed, disconnected the charger from the mains and remove the batteries. 4) Do not overcharge the batteries beyond the recommended charging time (20 hours), otherwise it will shorten the lifespan of the batteries. For 2 or 4 AA batteries (SN A N PowerBase PowerBase UL BS - Y 2 cells NOTE : Never put Ni-MH and Ni-Cd batteries together in the PowerBase Rapid Charger Battery Charge Time : Chemistry Battery *Charging Time & Size Capacity (Approximate) Ni-MH AA 2500 mAh 20 hours Ni-MH AA 2300 mAh 18 hours Ni-MH AAA 800 mAh 19 hours Ni-Cd AA 900 mAh 6 hours Ni-Cd AA 700 mAh 5 hours Ni-Cd AAA 300 mAh 6 hours Battery Charge Time : Chemistry Battery *Charging Time & Size Capacity (Approximate) Ni-MH AA 2500 mAh 20 hours Ni-MH AA 2300 mAh 18 hours Ni-MH AAA 800 mAh 19 hours Ni-Cd AA 900 mAh 6 hours Ni-Cd AA 700 mAh 5 hours Ni-Cd AAA 300 mAh 6 hours * The charging time is only for general reference. For detail of different charging time require, please see the PowerBase battery specification and contact PowerBase for the latest information. CAUTION 1) Before using this charger, read all instructions and cautionary markings in this manual. 2) This charger is for indoor use only. Do not expose the charger to rain, snow or moisture. 3) Do not use an extension cord. 4) Do not use the charger if it has received a sharp blow, been dropped or damaged in any way. 5) Always disconnect the charger from wall outlet if attempting to clean or inspect he charger or batteries. 6) Do not try to disassemble the charger, take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 7) Do not charge leaking, corroded or dead batteries. 8) Store the charger and batteries in a cool dry place when notin use. This charger is not intended for young children or infant. 9) Do not disassemble the batteries, short circuit or dispose of in fire. PLEASE NOTE: *PowerBase Industrial (HK) Ltd. will not be responsible for any personnel loss and/or injury if the defect was caused by misuse or mishandling by the user in any way. Recommended charging temperature is between 15 - 40 degree C. * The charging time is only for general reference. For detail of different charging time require, please see the PowerBase battery specification and contact PowerBase for the latest information. CAUTION 1) Before using this charger, read all instructions and cautionary markings in this manual. 2) This charger is for indoor use only. Do not expose the charger to rain, snow or moisture. 3) Do not use an extension cord. 4) Do not use the chargerifit has received a sharp blow, been dropped or damaged in any way. 5) Always disconnect the charger from wall outlet if attempting to clean or inspect he charger or batteries. 6) Do not try to disassemble the charger, take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 7) Do not charge leaking, corroded or dead batteries. 8) Store the charger and batteries in a cool dry place when notin use. This charger is not intended for young children or infant. 9) Do not disassemble the batteries, short circuit or dispose of in fire. PLEASE NOTE: *PowerBase Industrial (HK) Ltd. will not be responsible for any personnel loss and/or injury if the defect was caused by misuse or mishandling by the user in any way. Recommended charging temperature is between 15 - 40 degree C.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project