Native Instruments Traktor Scratch Pro Operation Manual

PDF

Document

WELCOME TO TRAKTOR!
Thank you very much for choosing TRAKTOR! This document will guide you to
sources of information and support that will help you to get the best out of your
Native Instruments product.
ADDITIONAL DOCUMENTATION
For detailed information about setting up and using TRAKTOR, please refer to the
corresponding operation manual included in the product package. A PDF file version
of this operation manual has been copied to your hard disk as part of the product
installation. Unless otherwise specified, the folder containing the appropriate PDF
files is located here:
Windows
C:\Program Files\Native Instruments\Traktor\Documentation
Mac OS X
Macintosh HD/Applications/Native Instruments/Traktor/Documentation
To find out more about recent changes and additions, please read the Readme.txt
file placed in your TRAKTOR installation folder.
PRODUCT ACTIVATION
In order to gain access to product updates as well as customer support, you need to
activate your TRAKTOR software. The Native Instruments Service Center application, installed along with the TRAKTOR software, will guide you through the product
activation procedure. For a detailed explanation regarding product activation, please
read the Service Center Quick Start Guide and operation manual. Unless otherwise
specified, the corresponding PDF files were copied to these folders as part of the
Service Center installation:
Windows
C:\Program Files\Native Instruments\Service Center\Documentation
Mac OS X
Macintosh HD/Applications/Native Instruments/Service Center/Documentation
SOFTWARE UPDATES
TRAKTOR is constantly being improved. Please make sure that you are always using
the latest version of TRAKTOR. After you have created a Native Instruments User
Account and activated TRAKTOR, you can conveniently download updates using
the Native Instruments Service Center application. For more information about
downloading updates, please refer to the Service Center Quick Start Guide and the
Service Center operation manual.
SUPPORT
If you are experiencing problems related to your Native Instruments product that the
supplied documentation does not cover, there are several ways of getting help:
► If problems occur during the product activation procedure, please contact our
Registration Support Team via the Registration Support Form.
► As a registered user, you can access the NI Knowledge Base that contains
helpful product-specific information.
► If the hints given there do not help you solve the problems, you can contact
our Technical Support Team via the Technical Support Form.
CONTACT
For more information about other Native Instruments products please visit our
homepage www.native-instruments.com
or contact us at www.native-instruments.com/contact.info
USER MANUAL
The information in this document is subject to change without notice and does not represent a commitment on the part of NATIVE INSTRUMENTS GmbH. The software described by this document is
subject to a License Agreement and may not be copied to other media. No part of this publication
may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by NATIVE INSTRUMENTS GmbH, hereinafter referred to as NATIVE INSTRUMENTS.
All product and company names are ™ or &reg; trademarks of their respective owners.
Users Guide written by Andr&eacute; Benedix, Friedemann Becker, Irmgard Bauer
Version: 1.0 (0)/2008)
Special thanks to the members of the Beta Test Team, who were invaluable not just in tracking down
bugs, but in making this a better product.
Germany
NATIVE INSTRUMENTS GmbH
Schlesische Str. 28
D-10997 Berlin
Germany
[email protected]
www.native-instruments.de
USA
NATIVE INSTRUMENTS North America, Inc.
5631 Hollywood Boulevard
Los Angeles, CA 90028
USA
[email protected]
www.native-instruments.com
&copy; Native Instruments GmbH, 2008. All rights reserved.
1. Welcome Words
Thank you for choosing TRAKTOR!
As legal owner of this software you contribute to its maintenance and to the creation of
future updates.
TRAKTOR PRO and TRAKTOR SCRATCH PRO introduce a new level of usability and creativity into software based DJing.
Native Instruments wishes you a great and successful time working with TRAKTOR!
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 2. System Requirements
For latest system requirements, compatibility and support of the latest operating systems
please see our website at:
www.native-instruments.com/traktor
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 3. Installation
This chapter describes in an easy step-by-step explanation how to install TRAKTOR on
your computer.
3.1 Software Installation
3.1.1 Windows Installation
!
These sections describe the installation procedure on Windows XP.
1.
Double-click “My Computer” then double-click the TRAKTOR CD icon to open the
content of the CD.
2.
Double-click “Traktor Setup.exe”.
3.
A dialog opens that welcomes you to the installation of TRAKTOR.
4.
The setup program will lead you through the installation procedure. Please follow the
onscreen instructions.
3.1.2 Mac OS X Installation
These sections describe the installation procedure on Mac OS X.
1.
On Mac, the TRAKTOR CD icon is displayed on the desktop. Click it to open the content of the CD.
2.
Double-click “Traktor Installer”.
3.
A dialog opens that welcomes you to the installation of TRAKTOR.
4.
The setup program will lead you through the installation procedure. Please follow the
onscreen instructions.
Please always refer to the
“Readme” file on the installation CD as it contains last minute information not available in the printed
manual.
%
If you choose a complete installation, the Audio 8 DJ drivers
will be installed by default. You can unselect the Audio 8 DJ by choosing the
custom installation.
!
Please always refer to the
“Readme” file on the installation CD as it contains last minute information not available in the printed
manual.
%
If you choose a complete installation, the Audio 8 DJ drivers
will be installed by default. You can unselect the Audio 8 DJ by choosing custom installation.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 3.2 Audio Device Driver Installation
You have to install the drivers of your audio interface before starting TRAKTOR.
The following chapter describes how to install the drivers of NATIVE INSTRUMENTS’ audio
interface AUDIO 8 DJ.
!
You cannot install the AUDIO 8
DJ on a USB 1.1 port – a USB
2.0 port is required.
If you own an audio interface of another manufacturer, please refer to its documentation
to install the drivers.
3.2.1Windows Installation
Windows Vista Installation
1. Connect the Audio 8 DJ to an available USB port on your computer.
2.
A window will be opened showing the message “Installing device driver software”.
3.
A screen shows up telling you that the Windows Logo Test has not been passed. Click
on “Install anyways” to proceed with the installation.
4.
When finished, it will display “Your devices are ready to use”.
Windows XP Installation
1. Connect the Audio 8 DJ to an available USB port on your computer.
2.
Windows XP will identify the Audio 8 DJ. Choose “No” if Windows asks you to search
the Internet for a driver.
3.
A screen shows up telling you that the Windows Logo Test has not been passed. Click
on “Install anyways” to proceed with the installation.
4.
Your computer will display a “New Hardware found” message.
5.
When finished, it will display “Your devices are ready to use”.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 3.2.2Mac OS X Installation
1.
Connect the Audio 8 DJ to an available USB port on your computer.
2.
You can make sure if the device shows up correctly by checking the “Audio MIDI
Setup” of Mac OS X – the Audio 8 DJ should be listed there.
3.3 Uninstalling TRAKTOR
3.3.1Windows
To uninstall TRAKTOR from your computer, use the following steps:
►
Go to “Windows Start &gt; Control Panel &gt; Software”.
►
Navigate to the entry “Native Instruments Traktor”.
►
Click “Remove” and follow the onscreen instructions.
3.3.2Mac OS X
To uninstall TRAKTOR from your Mac, please delete the Traktor folder located in the
Applications folder.
To uninstall Traktor completely including all settings and the collection files, delete the
following files and folders manually:
►
~/Library/Preferences/com.native-instruments.Traktor Pro.plist
►
~/Traktor Pro
►
~/Musik/Traktor
►
~/Library/Application Support/Native Instruments/Traktor
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 4. First Steps with TRAKTOR
This chapter helps you to get started with Traktor, especially when you are new to it.
4.1 Starting the Software
For starting TRAKTOR, do the following:
Windows:
► Go to “Start &gt; All Programs &gt; Native Instruments &gt; Traktor” and click the TRAKTOR
program icon.
Mac OS X:
► Go to “Macintosh HD &gt; Applications &gt; Traktor” and double click on the TRAKTOR
program icon.
4.2 Product Authorization
Before you can use Traktor without any restrictions you have to activate the software.
As long as TRAKTOR is not activated, you will be greeted on every startup with the following screen:
TRAKTOR PRO / TRAKTOR SCRATCH PRO – ► Choose Activate to start activation using the NI Service Center right away. TRAKTOR
will shut down automatically before launching NI SERVICE CENTER. Consult the
separate “Setup Guide” booklet included in your TRAKTOR package for more information about the NI Service Center and activating TRAKTOR.
► Click on Buy to purchase a copy of TRAKTOR in the Native Instruments online
shop. Your standard Internet browser will be opened and the Native Instruments
website will be loaded.
► Choose Run Demo to run TRAKTOR in Demo Mode. You can see whether you are in
Demo Mode from the Demo Mode graphic in the TRAKTOR Header.
!
The Demo Mode has the following restrictions:
audio processing stops after 30 minutes
and audio recording is disabled.
4.3 Setup Wizard
When restarting TRAKTOR after successful activation or when starting TRAKTOR in Demo
Mode, the “Setup Wizard” appears. It offers useful options for TRAKTORs initial configuration.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 10
The wizard offers different setup options for users of TRAKTOR PRO (described in section
4.3.1 Setting up TRAKTOR PRO) and users of TRAKTOR SCRATCH PRO (described in
section 4.3.2 Setting up TRAKTOR SCRATCH PRO).
► When starting TRAKTOR in Demo Mode, the first screen of the “Setup Wizard” will
ask you to select either the TRAKTOR PRO or the TRAKTOR SCRATCH PRO Demo.
► For authorized copies of TRAKTOR, the “Setup Wizard” will show up only once during
the very first start of TRAKTOR. Once you have selected your initial setup, the wizard
will not show up again.
► You can retrigger the wizard at any time via the Help tab of the Application Menu.
4.3.1Setting up TRAKTOR PRO
When registering the software with a TRAKTOR PRO serial number or when choosing the
TRAKTOR PRO Demo, the “Setup Wizard” offers the following options described more in
detail below.
►
Built-In Sound Card
►
External Audio Interface
►
External Mixer
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 11
TRAKTOR PRO with Built-In Sound Card
This setup is mainly meant to quickly check out TRAKTOR PRO on your computer without
any additional hardware. Be aware that with the built-in sound card you will not be able
to prelisten tracks.
Physical Setup
1. Make sure that the speakers of your computer are turned on and that the volume control of your operating system is turned up to a reasonable volume.
2.
Optionally connect a pair of headphones to the headphones output of your computer
and put them on your head.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 12
Software Setup
1. In the “Setup Wizard” select the option Built-In Sound Card.
2.
Confirm your choice by pressing OK. This opens the Audio Setup page of the
Preferences.
3. Drop down the Audio Device list and select your built-in sound card.
4. Usually, your computer chooses a latency value automatically. If so, use this latency
and sample rate settings. If not, choose a latency value between 30 and 50 ms and
a sample rate of 44.100 Hz.
5. Close the Preferences by clicking the Close button.
TRAKTOR PRO with External Audio Interface
For the professional use of TRAKTOR PRO you will need an external audio interface with
at least two stereo outputs. The additional stereo output serves for prelistening tracks on
your headphones while the main track is playing on the speaker system.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 13
Physical Setup
1. Before starting TRAKTOR Pro, make sure that the external audio interface is correctly
installed, connected and fully functional on your computer.
2.
Connect the primary outputs of the external audio interface to the amplifier system
driving your speakers.
3.
Connect your headphones to the secondary outputs of the external audio interface.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 14
Software Setup
1. In the “Setup Wizard” select the option External Audio Interface.
2.
Confirm your choice by pressing OK. This opens the Audio Setup page of the
Preferences.
3. Drop down the Audio Device list to select the external audio interface.
4. Set a latency and sample rate your system can handle. Typically use a higher latency
at first, such as 15 ms.
5. Open the Output Routing page to assign the outputs of TRAKTOR PRO to the physical
outputs of your audio interface.
6. Verify that Internal Mixer Mode is chosen.
7. If not automatically assigned, assign the Monitor outputs to the secondary outputs
of the external audio interface connected to the headphones and the Master outputs
to the primary outputs of the external audio interface connected to the amplifier system.
8. Close the Preferences by clicking the Close button.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 15
TRAKTOR PRO with External Mixer
For using TRAKTOR PRO with an external mixer, you need an external audio interface with
at least two stereo outputs. When mixing four decks an audio interface with four stereo
outputs such as the AUDIO 8 DJ is required.
The output of each TRAKTOR deck is routed to a separate output of the external audio
interface, each of them connected to another input channel of the mixer. The mixing and
prelistening is entirely done with the mixer.
Physical Setup
1. Before starting TRAKTOR Pro, make sure that the audio interface is correctly installed,
connected and fully functional on your computer.
2.
Connect the outputs of the external audio interface to the mixer inputs. Each stereo
output channel of the external audio interface connects to one of the stereo channel
inputs of the mixer.
3.
Connect your headphones to the mixer and the mixer-outputs to the amplifier system
driving your speakers.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 16
Software Setup
1. In the “Setup Wizard” select the option External Mixer.
2.
Confirm your choice by pressing OK. This opens the Audio Setup page of the
Preferences.
3.
Drop down the Audio Device list and select the external audio interface.
4.
Set a latency and sample rate your system can handle. Typically use a higher latency
at first, such as 15 ms.
5.
Open the Output Routing page to assign the outputs of TRAKTOR PRO to the physical
outputs of your audio interface.
%
For now use a moderate setting. You can change this later
and test out, what your system is able
to perform.
6. Verify that External Mixer Mode is chosen.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 17
7. If not automatically assigned, assign Out Channel A, B, C and D to all outputs of the
external audio interface that are connected to the mixer.
8. Close the Preferences by clicking the Close button.
%
Assigning Decks C/D, Out
Preview and Out Sent are optional depending on your hardware setup.
4.3.2Setting up TRAKTOR SCRATCH PRO
When registering the software with a TRAKTOR SCRATCH PRO serial number or when
choosing the TRAKTOR SCRATCH PRO Demo, the software starts with a default configuration suited for using TRAKTOR with Timecode records or CDs.
TRAKTOR SCRATCH PRO Setup
The setup for Traktor Scratch Pro gives you all you need for playing with two turntables/CD-Players.
Physical Setup
1. Before starting TRAKTOR SCRATCH PRO, make sure that the AUDIO 8 DJ (or your
TRAKTOR SCRATCH Certified Mixer) is correctly installed and fully functional on your
computer.
2.
Connect the outputs and inputs of the AUDIO 8 DJ to the mixer and to the turntables/
CD-Players with the Multicore Cables as described in chapter 13 (TRAKTOR SCRATCH
PRO Functionality), or, alternatively, connect your TRAKTOR SCRATCH PRO Certified
Mixer with your computer and your turntables/CD-Players as described in the mixers’
manual.
3.
Connect your headphones to the mixer and the mixer-outputs to the amplifier system
driving your speakers.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 18
Software Setup
1. When exploring Demo Mode, select the option TRAKTOR SCRATCH PRO Setup in the
“Setup Wizard”.
2.
Confirm your choice by pressing OK. This opens the Audio Setup page of the
Preferences.
3. Verify that the AUDIO 8 DJ is preselected in the field Audio Device. If not, select it from
the drop-down menu. Alternatively, choose your TRAKTOR SCRATCH PRO Certified
Mixer.
4. Set a latency and sample rate your system can handle. Typically use a higher latency
at first, such as 15 ms.
5. Open the Output Routing page to assign the outputs of TRAKTOR SCRATCH PRO to
the physical outputs of the AUDIO 8 DJ or your TRAKTOR SCRATCH PRO Certified
Mixer.
6. Verify that External Mixer Mode is chosen.
7. If not automatically assigned, assign Out Channel A, B, C and D to all outputs of the
AUDIO 8 DJ that are connected to the mixer, respectively assign these channels to
the outputs of your TRAKTOR SCRATCH PRO Certified Mixer.
8. Open the Input Routing page and verify that the input channels are correctly assigned.
9. Close the Preferences by clicking the Close button.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 19
4.4 Test Drive TRAKTOR
Now that the sound card is configured and TRAKTOR is up and running, let’s have a test.
For this, we use the Demo Tracks that come with TRAKTOR.
We start by loading tracks in Deck A and B and letting them play:
1.
Click and hold a Demo Track in the Browser List and drag it into Deck A. The selected track will load in Deck A and the track Waveform will appear in the Waveform
Display.
2.
Click and hold a second Demo Track in the Browser List and drag it into Deck B.
3.
Start the Decks by clicking Play/Pause or if you are using Traktor Scratch Pro
start your Timecode Record/CD.
4.
The Waveform starts moving from right to left. If this does not happen, verify if you
have selected the correct audio interface and if you have correctly mapped the outputs
to the audio interface channels. If you are using TRAKTOR SCRATCH PRO, check if
the Timecode graphic (Scope) looks correct.
5.
Once the waveform is moving, the music becomes audible on your speakers. If this is
not the case, verify if the Master Level Meter is showing any activity. If not check the
faders and knobs on the internal or external mixer.
6.
If the Master Level Meter shows an output signal but there still is no audio on your
speakers, check if the speaker system is correctly hooked up and turned on. Some
audio interfaces have monitor LEDs that can further help in finding the reason for the
absence of sound.
7.
Once you got sound, move the Crossfader left and right to blend from one track to
the other.
8.
For prelistening the tracks on the Internal Mixer, click the Cue Button in the Mixer Strip
of the Deck. When using an external mixer cueing is done there.
9.
The two tracks will most likely have different tempos and you will need to synchronize
their tempo and beat. You can observe current beat offset in the Phase Meter above
the Waveforms of both Decks.
10. Click the Sync button for automatic synchronization or use the Pitch Fader (either on
the software or the hardware deck) for manual synchronization.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 20
5. User Interface
This chapter provides a basic run-through the graphical user interface of TRAKTOR and
explains its basic features.
5.1 Overview
1.
Application Menu
2.
Header
3.
Global Section
4.
Decks
5.
Mixer
6.
Crossfader
7.
Browser
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 21
5.2 Application Menu
The Application Menu gives access to basic functions and information about the software.
File (Windows)
► Preferences: Opens the Traktor Preferences window.
► Audio Setup: Opens the Soundcard sub-menu of the Preferences.
!
The Application Menu is not
visible in full screen mode,
therefore all File and View options can
be reached directly from the TRAKTOR
graphical user interface. However, the
Help menu can only be accessed from
the Application Menu.
► MIDI Setup: Opens the MIDI Interfaces sub-menu of the Preferences.
► Exit: Closes the program. If there is audio on the Master Output playing, you will have
to confirm the closing after a warning message.
Traktor (Mac)
About: Opens a window with the version number, license type, serial number and the
credits. You can close it by clicking on it.
Preferences: Opens the Traktor Preferences window.
View
!
► Layouts: Lets you choose one of the available layouts.
To switch back to windowed
mode, click on the highlighted
Fullscreen Mode Button in the Header.
► Fullscreen: Switches to Full Screen Mode.
Help
► Launch Service Center: Opens the NI Service Center, where you can download updates
and register your products.
► Open Manual: Opens the TRAKTOR user manual.
► Visit TRAKTOR on the web: Opens the TRAKTOR website on the Native Instruments
website.
► About TRAKTOR: Opens a window with the version number, license type, serial number and the credits. You can close it by clicking on it.
%
You can also open the About
Wind o w by clickin g th e
TRAKTOR logo.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 22
5.3 Header
The elements contained in the Header give access to basic functions of the application
and provide useful status information.
1.
TRAKTOR Logo: Opens the About Window.
2.
MIDI Indicator: Displays the incoming MIDI-commands. It flashes blue while receiving a
signal.
3.
Audio Indicator: Displays the status of your sound card (blue: sound card is connected
and working; red: no soundcard configured, no soundcard connected or soundcard is
not working properly).
4.
CPU Meter: Indicates how much of the CPU-capacity is available in TRAKTORs in&shy;ternal
audio engine. Gives information about how stressed the system is, and how much
headroom is left until you reach the capacity limit. The more the meter is lit, the more
likely you may experience audio dropouts with increasing frequency for values above
80%.
5.
Clock: Displays the time depending on the system time.
6.
Master Out: Displays the master output level. The tips of the meters turn red when signal clipping occurs or when the built-in Limiter starts compressing the signal (if
switched on in the Preferences).
7.
Battery Indicator: Gives quick information about how much power your battery has left.
If you are using a power supply, the indicator is blue. If you are running from battery,
the indicator turns red.
8.
Recording Indicator: Displays the status of the Traktor Audio Recorder. If lit red, Traktor
is recording.
9.
Layout Selector: Gives direct access to the Screen Layouts configured with the Layout
Manager (see chapter 16.1.2 – Layout Manager and 14.11 – Layout Manager).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 23
10. Maximize Browser Button: Expands the browser to full window size.
11. Preferences Button: Opens the Traktor Preferences menu (see chapter 14 – Preferences).
12. Full Screen Button: Toggles Full Screen Mode on and off.
13. NI Logo: Opens the About Window.
5.4 Global Section
The Global Section offers five panels which are explained in detail below.
5.4.1Master Panel
1.
Master Volume: Controls the Master Output Level.
2.
Mouse Mode selection:
Snap: snaps to the closest beat when setting Cue Points and Loops or clicking in the
Waveform Display.
Quant: makes skips between Hotcues and Hotloops beat-accurate for real-time remixing.
CD Mode: plays a short Stutter Loop when the Deck is paused for cueing up a beat
similar to stutter loops of CD players.
3.
Headphones Mix: Controls the mix between the master and the cued signal in the headphones.
4.
Headphones Volume: Controls the level of the Monitor Output for your headphones.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 24
5.
Global Audio Options:
► LFO Reset: resets the LFO of all LFO based effects.
► Cruise: activates automatic playback of an entire playlist (Autoplay).
► Tick: toggles an audible Beat Tick on and off that works like a metronome. Select
the channel via the channel headphones Cue button.
5.4.2FX 1 Panel / FX 2 Panel
Each of the two Effect Panels represents one of the effect slots of Traktor. The effect
slots can either host three chained effects (Chained Mode) for creating interesting effect
combinations or host a single advanced effect (Advanced Mode) for in-depth effect control
over a single effect.
Chained Mode:
1.
Dry/Wet Control: Controls the main-signal-to-effect-signal-ratio for the entire effects
chain.
2.
Effect Selector: Selects the effects from the dropdown menu of preselected effects
defined in the Preferences.
3.
Effect Amount Knobs: Each knob controls the individual effect amounts.
4.
Snapshot: Saves the current effect settings as default setting. The settings are recalled
individually for each of the selected effects.
5.
Effect On Buttons: Switch the individual effects on and off.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 25
Advanced:
1.
Dry/Wet Control: Controls the main-signal-to-effect-signal-ratio for the selected effect.
2.
Effect Selector: Selects the effect from the dropdown menu of preselected effects defined in the Preferences.
3.
Effect Parameter Knobs: Control the different parameters of the selected effect.
4.
Snapshot: Saves the actual effect settings as default setting.
5.
Effect On: Globally switches the selected effect on and off.
6.
Effect Parameter Reset: Resets all effect parameters to the default setting.
7.
Effect Buttons 1/2: Control the selected effect. The exact function depends on which
effect is selected.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 26
5.4.3Master Clock
1.
Master Clock Tick: Toggles an audible, metronome-like Beat Tick with the Master Clock
as source on and off.
2.
Mode:
► Manual: allows manual selection of the Master Clock or a Deck as tempo
source.
► Auto: automatically selects one of the Decks as tempo source. The Master Clock
automatically syncs to the Master Deck.
3. Tempo Display: Displays the current tempo and offset of the Master Clock.
4. Tap: Sets the Master Tempo manually by tapping to the beat.
5. Master Clock Pitch Bend: Slows down and speeds up the Master Tempo momentarily.
6. Master Tempo Adjust: Increases (+) and decreases (-) the Master Tempo stepwise.
7. MIDI Clock Reset: Resets the external slaves connected via MIDI Clock.
8. MIDI Clock Send: Activates or deactivates MIDI-Clock for external synchronization.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 27
5.4.4Recorder
1.
Rec On/Off: Starts and stops recording.
2.
Broadcasting On/Off: Starts and stops broadcasting.
3.
Gain: Controls the volume of the recording.
4.
Recorder Display: Displays the length and file size of the recording.
5.
Rec Meter: Displays the level of the recording signal.
6.
Delete: Deletes the current recording.
7.
Cut: Cuts the current recording and seamlessly starts a new recording file.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 28
5.5 Decks
%
This screenshot shows nearly all
Deck-elements. Depending on
the layout some of them may be hidden
or can be shown additionally, e.g. the
Scratch Panels in TRAKTOR SCRATCH
PRO.
1.
Track Cover Icon: Displays the cover of the loaded track.
2.
Track-Info: Displays information about the loaded track. Customize displayed information in Preferences &gt; Layout Manager &gt; Deck Details &gt; Deck Header.
3.
Sync-Controls:
► Sync Button: synchronizes the playing track to the current tempo source (another
Deck or the Master Clock)
► Master Button: defines the Deck as Master for syncing.
► Phase Meter: shows the offset of the beats in the playing track to the beats in the
Master Deck or to the Master Clock ticks. The Phase Meter has to be centered for
matching the beats.
► Pitch Bend Buttons: slows down or speeds up the playing track temporarily.
synced
shifted phase
4. Waveform:
► Visually represents the local part of the playing track. The brighter color shade
represents high frequencies, the darker color shade represents low frequencies.
► Zoom in or out by using the “+” and “-“ buttons.
5. Skip to Start: Moves the play position to the beginning of the loaded track.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 29
6. Stripe:
Displays the complete waveform of the loaded track including Cue Points and
Loops.
Displays the cached part of the track required for seamless jumps as yellow lines above
and below the Stripe.
7. Input Selector: Selects the Input Mode for the engaged Deck. Use to switch between
Internal Playback, Scratch Control or External Input.
8. Pitch Fader: Decreases and increases the tempo of the playing track by moving it up or
down.
9. Key-Lock: Activates or deactivates the Key Lock feature.
10. Pitch Adjust: Increases and decreases the tempo of the playing track stepwise. The
sensitivity of the steps can be customized via right/ctrl-click.
11. Transport Controls: Playback and Current Cue Point control. See chapter 5.5.1 (Transport
Controls) and 6.4 (Transport Controls).
12. Loop Controls: Sets automatic and manual Loops. See chapter 5.5.2 (Loop Controls)
and 6.5 (Loop Controls).
13. Open/Close Advanced Panel: Opens or closes the Advanced Control Panels. See chapter
5.5.3 (Advanced Panels) and 6.7 (The Advanced Panels).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 30
5.5.1Transport Controls
1.
Play/Pause:
► Starts and stops playback.
► Stopping does not set a Current Cue Point when playback is paused.
2. Cue:
► During playback, it skips back to the Current Cue Point.
► On a paused Deck, a new Current Cue Point is set at the current position and the
track will be played back from there as long as the button is pressed. When released, the track skips back to the Current Cue Point.
3. Cue Play/Pause:
► During playback it skips back to the Current Cue Point and keeps the track playing. Playback resumes when releasing the button.
► On a paused Deck it sets a new Current Cue Point and starts playback from there
when releasing the button.
5.5.2Loop Controls
1.
Loop Size Control:
► Sets Auto Loops and changes their size.
► The chosen loop size is highlighted yellow.
► Use the Arrow buttons on each end of the range to see higher or lower values.
The Arrow buttons flash if the selected length is out of range.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 31
2. Loop In Button
► Manually sets a Loop In Cue Point.
► The Loop In Button can also be used to set a Current Cue Point on the fly during
playback.
► Pressing In while a loop is active selects the “Loop In” Move Mode (see below).
3. Loop Out Button
► Manually sets a Loop Out Point and activates the loop.
► Pressing Out while a loop is active selects the “Loop Out” Move Mode (see below).
► Pressing In and Out while a loop is active selects the “Loop” Move Mode to move
the loop as a whole.
4. Loop Active Button: This button shows that a loop is active and running. It Can be used
to leave (deactivate) the loop. If turned on when no loop is running, the next stored
loop encountered during playback is activated.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 32
5.5.3Advanced Panels
To open the Advanced Panels, click on the small downwards pointing arrow button below
the Pitch Fader.
There are three Advanced Panels. Select them by clicking on the Move, Cue or Grid Buttons
on the left side.
Loop Move and Beat Jump Panel (Move):
1.
Mode Selector: Switch between Beat Jump, Loop, Loop In and Loop Out Mode.
2.
Amount Controls: Select the step size in beats. The yellow arrow marks the chosen step
size. Scroll through the predefined move sizes with the buttons on the left and right
and click on a value to choose one.
3.
Move Buttons: Depending on the mode selected in the Mode Selector, the play position
(Beat Jump), the complete Loop, the Loop In Point or the Loop Out Point is moved
about the selected step size forward or backward.
4.
Loop Button:
► This button selects a step size that is based on the current loop size for the movement.
► With Loop Mode selected, the loop will be moved backwards or forwards about
exactly one loop length.
► With Loop In or Loop Out Mode selected, the loop will be resized by doubling or
halving the current loop length.
5. Fine Button: Selects a fine step size for the movement. Use this for fine adjustments.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 33
Cue Point and Loop Management Panel (Cue):
1.
Next/Previous Cue Point: Use these to skips backward or forward to the previous or next
Stored Cue Point in the track.
2.
Cue Position Display: Displays the position of the selected Cue/Loop In Point in mm:ss:
ms.
3.
Cue Name Display: The Display shows the name of the selected Cue/Loop In Point. Click
inside the field to edit the name. Click on the downwards pointing arrow to select another stored Cue/Loop In Point.
4.
Cue Type Selector: Click on the downwards pointing arrow to select the type of Cue Point.
Available types are described in chapter 6.7.3 (Cue Point Types).
5.
Delete: Deletes the selected Cue/Loop In Point.
6. Store:
► Stores the Current Cue Point and maps it to the next free Hotcue Button.
► Up to 32 cue points or loops can be stored per track.
7. Hotcue Buttons:
► These provide direct access to up to 8 Cue/Loop In Points per track.
► Their background color reflects the chosen Cue Point Type.
8. Map: This button enables Hotcue Mapping Mode. When active, pressing a Hotcue Button
maps the currently displayed Cue/ Loop In point to it. This works for stored Cue/ Loop
In Points only.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 34
Beatgrid Panel (Grid):
1.
Adjust Beatmarker Buttons:
► These Buttons adjust the position of the Beatmarker. As a result the whole Beatgrid
gets shifted to the left or right.
► Use this to move the Beatmarker to the desired starting point.
2. Lock Beatgrid: Locks the Beatgrid (all buttons in the Grid Panel are disabled).
3. BPM Adjust Buttons:
tighten Beatgrid
► These buttons change the BPM of a track. As a result, the Beatgrid gets expanded or compressed.
► Use this to match the grid with the beats during the whole track.
widen Beatgrid
4. Auto Grid: Click on this button to set a Beatmarker at the Current Cue Point.
5. Tempo Display: This display shows the tempo of the loaded Track in BPM.
6. &divide;2 / x2: Click on these buttons to halve/double the tempo.
7. Tap: Sets the tempo based on how fast or slow you tap on the button. The tempo will
be adjusted after the fourth tap.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 35
5.6 Mixer
1.
Equalizer:
► Provides a 3-band-EQ (default) for adjusting the sound of the playing track.
► Clicking the small buttons next to the knobs kills the related frequencies.
► For other EQ Types go to Preferences &gt; Mixer EQ Selection.
2. Channel Fader:
► Controls the channel volume.
► The Channel Level Meters show the pre-fader level of the Decks’ signal and can
be adjusted with the Gain Knob.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 36
3. Filter:
► This knob provides control over the bipolar Channel Filter.
► Enable the filter by clicking the small button next to the knob.
► Center position is neutral. Turn left for a low pass filter and turn right for a high
pass filter.
4. Key Lock:
► Provides control over the track key. Turn right to raise the key, turn left to lower
the key.
► Enable Key Lock by clicking the small button next to the knob.
5. Effect Assign Buttons: Click on 1 or 2 to assign a channel to Effect Slot 1 or 2.
6. Gain: Adjusts the gain of a track. Use this to match the levels of the tracks before mixing them with the faders.
7. Cue Button:
► Pre-listen to a track over the internal Traktor Mixer.
► If Tick is activated , click the Cue Button to make the beat-tick audible on that
deck.
8 . Pan Button: Controls the channel balance between the left and the right stereo channel.
9. Automatic Crossfade Buttons:
► Clicking on these buttons lets the Crossfader move automatically to the left or
right.
► Click again to stop transition.
9. Incremental Crossfade Buttons: Clicking on these buttons lets the Crossfader move stepwise to the left or right.
11. Deck Assign Buttons: Assigns the Decks to the Crossfader. The buttons for the assigned
Deck(s) are lit.
12. Crossfader: Move the Crossfader to the left or right to perform transitions between the
Decks.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 37
5.7 Browser
1.
Preview Player: Click the Preview Player Icon in the Browser List to load a track into the
Preview Player or drag-and-drop a track on it.
2.
Favorites: The Favorites provide direct access to Playlists or folders. To map them,
simply drag-and-drop a folder or a Playlist onto one of the 10 Favorite slots.
3.
Browser List:
► Shows tracks depending on the source that is selected (folder, playlist, search
results or tag based).
!
Dragging another Playlist on
an already assigned Favorite
will replace the Favorite Playlist with the
new Playlist.
!
► Right-/Ctrl-Click on the headline to switch columns on and off.
► Drag-and-drop columns to the left or to the right to re-arrange the order of the
columns.
4. Track Info: Displays the title and the artist of the currently in the Browser List marked
track.
Shift-dragging another Playlist
on an already assigned Favorite
will merge the content of the Favorite
Playlist with the content of the shiftdragged Playlist.
5. Search Field: Provides a live search based on the tags of the tracks in the Collection.
Read more in chapter 7.2, Finding Tracks (Search).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 38
6. Browser Tree:
► Track Collection: contains all Tracks imported to your Collection, sorted by Artist,
Release, Label or Genre.
► Playlists: contains all your TRAKTOR Playlists.
► Explorer: browse your hard drive for music tracks, useful for not imported
tracks.
► Audio Recordings: contains all recordings done with the Traktor Audio Recorder.
► iTunes: provides direct access to your iTunes Library including all playlists.
► History: contains the history playlist, which Traktor automatically stores after every
session. You can find History Playlists from former sessions in My Documents\
Native Instruments\Traktor\History.
7. Cover View: Displays the cover of the currently in the Browser List marked track.
8. Status Bar/ Error Messages: Displays the progress of analyzing jobs, error messages and
the overall status of Traktor.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 39
6. Using the Decks
Traktor provides up to 4 Decks. You can choose between 2 or 4 Deck Mode in the
Preferences independently of your decision in the Setup Wizard.
Traktors Decks have all features and more you need for a professional DJ-performance.
6.1 Loading Tracks
To load a track into a Deck, select the track in the Browser List with the up/down arrow
keys on your computer keyboard, then:
1.
Press Ctrl + Arrow Left/Right to load the selected track into Deck A or Deck B or
2.
Drag-and-Drop a track from the Browser List into the Deck you want or
3.
Right-/Ctrl-Click on the track and choose Load Track in Deck A/B/C/D.
%
To use Traktor on smaller
displays, too, it provides Mini
Decks. A Mini Deck shows only two rows
in the Header and has no Waveform
Display.
6.2 The Deck Heading
To activate Mini Decks go to Preferences
&gt; Layout Manager &gt; Deck Style and set
the size for the Decks to Mini.
The Deck Heading gives you information about the loaded track.
► With full size Decks there are three rows and three columns you can use.
► You can customize the displayed information to your likings in Preferences &gt; Layout
Manager &gt; Deck Details &gt; Deck Header.
► If you use Mini Decks only the first row is shown.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 40
6.3 The Waveform Display and Stripe View
The Waveform and the Stripe are visual representations of the loaded track. The Waveform
is instantly visible; the Stripe is displayed as soon as the track is analyzed. Once a track
is analyzed, the Stripe is also instantly displayed. Read more about the analyzation in
chapter 7.8.2 (Analysis).
6.3.1Waveform
The Waveform Display gives a detailed view about a few bars before and after the current
playback position.
► You can zoom in and out by clicking the “+” and “-“ buttons next to the Waveform.
► A brighter color shade represents high frequencies; a darker color shade represents
low frequencies.
► The behavior of dragging the waveform with the mouse depends on the Snap Mode,
which is activated in the Master Panel of the Global Section. Read more about Mouse
Modes in chapter 11 (Mouse Control for Faders and Knobs).
6.3.2Stripe
The Stripe View gives an overview about the whole track. It also displays the play position
and all Cue Points and Loops.
► When the configured Track End Warning Time (Preferences &gt; Global View Options &gt;
Decks) is reached, it flashes red.
► The behavior when clicking inside the Stripe Display depends on Quant Mode, which
is activated in the Master Panel of the Global Section. Read more about Mouse Modes
in chapter 11 (Mouse Control for Faders and Knobs).
The yellow bars on top and bottom of the Stripe indicate which part of the track is loaded
into the cache. Jumps in cached parts of a track are absolutely seamless.
%
You can setup the cache size for
Traktors Decks in Preferences
&gt; Loading &gt; Deck Cache Size. For more
see chapter 14.4 (Loading).
► As long as these bars are flashing Traktor writes parts of the track into the cache.
► The yellow bars stop flashing, when the whole track is loaded into the cache.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 41
6.4 Transport Controls
The Transport Controls are the main buttons for playing tracks with Traktor.
6.4.1Play
► Click Play/Pause to start and stop playback.
6.4.2Cue
This button has multiple functions depending on the playback state of the track.
► Clicking Cue when playback is paused sets a new Current Cue Point at the current play
position respectively on the beat next to the play position in Snap Mode).
► When the track is paused and already cued up to the Current Cue Point, the same
button serves to prelisten the Cue Point by playing the track as long as the button is
pressed.
► Clicking Cue during playback jumps back to the previously set Current Cue Point and
stops playback.
6.4.3Cup (Cue/Play)
This button behaves similar to Cue but stops playback as long as held down.
► On a paused Deck, clicking Cup sets a Current Cue Point position and starts playback
from there when releasing the button.
► Clicking Cup during playback skips back to the Current Cue Point and pauses the
playback until the button is released.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 42
6.5 Loop Controls
The main loop controls offer all functions required for the creative use of loops in your
mix.
6.5.1Auto Looping
► Click on a number in the Loop Size Control to set a loop of this size. The numbers
represent the loop length in beats. The Loop Active Button will be highlighted in yellow.
► The chosen loop size is also lit yellow, as long as the loop is active. When the loop is
not active it is shown as a light-grey button.
► To leave the loop, click on the selected loop length again or, alternatively, click on the
highlighted Active Button.
► To change the size of an active loop on the fly, click on another length in the Loop Size
Control.
► Click on the Arrow Buttons on each end of the Loop Size Control to see higher or
lower values. The Arrow Buttons flash if the selected length is out of range.
%
For more option for working with
loops, like storing and editing
loops, see chapter 16.5 (Transport).
6.5.2Manual Looping
► Click on the Loop In Button to set the start point of the loop.
► Click on the Loop Out Button to set the end point of the loop. Your track will begin to
loop the respective amount. The Loop Active Button will be highlighted.
► To leave the loop, click on the highlighted Active Button.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 43
6.6 Tempo Controls
TRAKTOR provides a Pitch Fader with customizable range, a pair of Pitch Bend Buttons
as well as a variety of automated syncing functions that will make your mixes faster than
ever before.
6.6.1Manual Tempo Controls
Pitch Fader
By moving the Pitch Fader up or down you can speed up or slow down the tempo of the
track. TRAKTORs Pitch Fader has just the same functionality as a pitch fader on any standard DJ turntable or pitchable CD player.
► To adjust the tempo stepwise, use the “+” and “-“ Buttons.
► You can also use the scroll wheel of your mouse to move the Pitch Fader up or down
in steps.
► The sensitivities of the “+” and “-“ Buttons and the scroll wheel of the mouse can be
adjusted by right-/ ctrl-clicking on the “+” or “-“ Button and selecting one of the sensitivity options.
Pitch Bend Buttons
The Pitch Bend Buttons are used if two tracks are running with the same tempo, but their
phase is shifted slightly. This corresponds to a soft touching of the vinyl to slow down or
fasten the tracks that go slightly out of sync.
► Click the button with the left pointing arrow to slow down the track a bit and click the
button with the right pointing arrow to fasten the track a bit. The tempo change is only
momentary. If you release the mouse button, the track continues in its normal tempo.
%
Use Beatgrids for perfect accuracy of the P hase Meter.
See chapter 6.7.5, Beatgrid Panel (Grid
Panel).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 44
6.6.2Phase Meter
The Phase Meter is a visual reference for track synchronization. It shows you if a track is in
sync or if it plays with a beat offset compared to the Master Deck or the Master Clock.
► If two tracks’ Phases are synchronized, the meter stays in the middle.
► If one tracks’ Phase is shifted backward, a yellow stripe is seen on the left side of the
middle position.
► If a tracks’ Phase is shifted forward, a yellow stripe is seen on the right side of the
middle position.
► You can globally activate or deactivate the Phase Meter in Preferences &gt; Layout
Manager &gt; Deck Details &gt; Pitch Controls.
► Shift the Phase by click, hold and dragging it with the mouse.
► Shift the Phase by using the scroll wheel of your mouse.
6.6.3Beat Synchronization
Automatic Beat Synchronization is one of the central features of TRAKTOR and works with
a single click!
Sync Button
The Sync button provides the fastest way for beatmatching.
Click on Sync to automatically match the tempo and the Phase of the playing track to
► the Master Deck
or
► the Master Clock, if no Deck is selected as Master Deck.
Master Deck
The Master Decks gives the target tempo for syncing other Decks. TRAKTOR sets the
Master Deck automatically.
&amp;
Automatic Master Deck!
Master button - Master Deck
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 45
► The Master Deck is automatically set by TRAKTOR depending on which track has the
longest uninterrupted playtime.
► You can change the selected Master Deck by clicking the Master button of another
Deck.
Master button - slaved Deck
► If Traktor does not automatically set the Master Deck, activate Auto Mode in the
Master Clock Panel of the Global Section (see chapter 5.4.3 (Master Clock)).
When switching the Master Clock to Manual Mode, you have to select manually which
Deck is the Master by clicking on the Master button of this Deck.
► If no Deck is selected as Master, the Master Clock itself defines the target tempo.
6.6.4Key Lock
With TRAKTOR it is possible to change the tempo of a track while keeping its original key.
When you play a track at a higher or lower tempo, the tone pitch will often sound unnatural. To avoid this, you can lock the key of this track so that tempo changes do not affect
it (often also called “Master Tempo”).
Key Lock active
► Click the Key Lock Button on the right side of the Stripe for playing a track at original
pitch.
► Use the small button next to the Key Knob in the Mixer for enganging Key Lock mode
without altering the current pitch.
► Both buttons are lit, when Key Lock is active.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 46
6.7 The Advanced Panels
The Advanced Panels provide additional editing and storing functions for Loops or Cue
Points, Hotcueing, Beatjumping and for preparing your tracks with Beatgrids.
!
You cannot open the Advanced
Panels in Mini Deck Mode
► To open the Advanced Panels click the button underneath the Active button.
► Alternatively activate the Advanced Panels in Preferences &gt; Layout Manager &gt; Deck
Details &gt; Deck Style.
► Once the panel is open the buttons labeled Move, Cue and Grid each give access to
one of the three available subpanels.
6.7.1 Beatjump and Loop Move Panel (Move Panel)
The Beatjump and Loop Move Panel (short: Move Panel) lets you edit already set loops
and jump inside the track by a predefined number of beats.
%
With Quant activated in the
Master Panel, all moves are
absolutely seamless.
► There are four modes available described below. To change the modes use the Mode
Selector.
► The Amount Control applies to all modes. With this you can select the size of the mov-
ing in beats. The yellow arrow under a value marks the selected size. Scroll through
the predefined move sizes with the buttons on the left and right.
Beatjump Mode
With Beatjump mode you can jump forwards or backwards in the track.
► Choose a move size by using the Amount Control.
► Click the Move Buttons to jump forward or backward by the selected move size.
► With the Fine Button activated you can jump by a very fine amount. The Amount
Control automatically switches to Fine. There is an even more precise amount possible
by choosing xFNE inside the Amount Control.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 47
Loop Mode
In Loop Mode you can move the whole loop.
1.
Choose a move size by using the Amount Control.
2.
Click the Move Buttons to move the loop by the chosen move size.
► With Loop activated the loop will be moved for a full Loop length. The Amount
Controls automatically switches to Loop, when clicking the Loop Button.
► With the Fine Button activated you can move the Loop by a very fine amount. The
Amount Control automatically switches to Fine. There is an even more precise
amount possible by choosing xFNE inside the Amount Control.
Loop In Mode
Loop In Mode edits the Loop In Point.
1.
Choose a move size by using the Amount Control.
2.
Move the Loop In Point by the chosen amount with the Move Buttons.
► With Loop activated the Loop Length is halved or doubled when using the Move
Buttons.
► With the Fine Button activated you can edit the Loop Size by moving the Loop In
Point with a very fine amount. The Amount Control automatically switches to Fine.
The amount xFNE is even more precise.
Loop Out Mode
Loop Out Mode edits the Loop Out Point.
1.
Choose a move size by using the Amount Control.
2.
Move the Loop Out Point by the chosen amount with the Move Buttons.
► With Loop activated the Loop Length is halved or doubled when using the Move Buttons.
► With the Fine Button activated you can edit the Loop Size by moving the Loop In Point
with a very fine amount. The Amount Control automatically switches to Fine. The
amount xFNE is even more precise.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 48
6.7.2 Cue Point and Loop Management Panel (Cue Panel)
%
The Current Cue Point always is
your starting point for working
with cue points and for storing loops.
The Cue Point and Loop Management Panel (short: Cue Panel) gives you the ability to
store and map Cue Points and Loops.
With Stored Cue Points you can mark specific positions in your tracks, e.g. beginning
vocals, instruments or breaks. To store a Cue Point, do as follows:
1.
Set the Cue Point with the Cue button in the Transport Controls.
2.
Click Store.
%
You can store up to 32 Cue
points and Loops
► You can skip from one Stored Cue Point to the next by using the Next/Previous
Cue Point buttons.
► The Cue Position Display shows the position of the Stored Cue Point within the
track.
► You can assign a name to a Cue Point right next to the Position Display in the Cue
Name Display; click in the display, highlight the name and rename it.
► You can skip to a Stored Cue Point directly with the dropdown menu next to the
Cue Name Display or with the Hotcue Buttons.
► You can assign a special action to a Cue Point by changing its type in the Cue Type
Selector. The following Cue Point Types are available:
► Cue (standard Cue Point)
► In (Fade In Cue Point)
► Out (Fade Out Cue Point)
► Load (Load Cue Point)
► Grid (Beatmarker)
► Loop (Loop In Point)
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 49
6.7.3 Cue Point Types
This section describes the special functions of the different Cue Point Types in detail.
Fade In/Fade Out Cue Points
The Fade In and Fade Out Cue Points are used for automated Cue/Play of two tracks. For
this to work, you have to set a Fade In Cue Point in one Deck and a Fade Out Cue Point
in the other.
► Additionally, you have to enable this option in Preferences &gt; Loading &gt; Loading.
Fade In
How they work:
Fade out
1.
Load a track into Deck A.
2.
Scroll towards the end of the track and click Cue to move the Cue Point to this position.
3.
Click Store to convert the Cue Point into a Stored Cue Point.
4.
Dropdown the Cue Type Selector and select Out from the menu.
5.
A red Fade Out Cue Point will appear in the Waveform Display and the Stripe View.
6.
Now load a track into Deck B.
7.
Set a Stored Cue Point at the beginning of the track by clicking Store.
8.
Dropdown the Cue Type Selector and select In from the menu.
9.
A red Fade In Cue Point will appear in the Waveform Display and Stripe View.
10. Click the Cruise Button in the Global Section to activate Autoplay Mode.
11. Start the playback of the track in Deck A shortly before the Fade Out Cue Point.
12. When the Fade Out Cue Point in Deck A crosses the play position, the track in Deck
B will automatically begin playing from its Fade In Cue Point.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 50
Load Cue Point
A Load Cue Point causes a track to automatically cue to this point when it is loaded into
a Deck, saving you from the need to manually cue your track to this point.
► If you want to make use of the Load Cue Points, enable the option Initially cue to Load
Marker in Preferences &gt; Loading &gt; Loading.
Load
Beatmarker
A Beatmarker sets the starting point for a Beatgrid. This is a special cue point from which
a regularly spaced grid of reference lines is created, used to synchronize tracks. Please
read chapter 6.7.5, Beatgrid Panel (Grid Panel), for a detailed explanation of Beatmarker
and Beatgrids.
Grid
Stored Loops
The same functionality for storing cue points applies to Loops, too.
1.
Set a loop with the Loop Panel (see chapter 6.5. Loop Controls).
2.
Click Store.
3.
The loop markers change to green Loop In and Loop Out Points and the loop is now
a Stored Loop.
4.
The Loop In Point is now reachable like a Stored Cue Point.
Loop In
Loop Out
Deleting a Stored Cue Point or Loop
If you want to delete a Stored Cue Point or Loop permanently, do as follows:
1.
Go to the Cue Point or Loop by using the Next/Previous Cue Buttons or choose it from
the dropdown menu under the Cue Name Display.
2.
Click on Delete.
3.
The Cue Point or Loop now is deleted. There is no undo for this!
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 51
6.7.4 Hotcues and Hotcue Mapping
In TRAKTOR you an assign any Stored Cue Point or Loop to one of the 8 Hotcue Buttons
that allow instant and fast access to the most important Cue Points and Loops of a
track�.
%
This feature also enables you to
store Cue Points and Loops in
a non-chronological order.
► Storing a Cue Point instantly maps it to the next available Hotcue. Click a second time
on Store to duplicate the Hotcue.
► If you want to change the assignment, click on the assigned Hotcue, then click on
Map and then on the new Hotcue.
Grid
Fade In/Out
Cue
Load
Loop
► Select a Cue/Loop In point, then click on the Wastebin Icon to delete a Cue/Loop In
Point. This deletes the Cue/Loop In Point permanently.
How to use Hot Cues
Hot Cue Buttons behave differently depending on if the track is playing or not:
► Clicking a Hot Cue Button while playback is running skips the play position to the
mapped Cue/ Loop In Point. The track is continuing playback from there.
► While playback is paused, the Hot Cue Buttons act like Cue in the Transport Panel.
Clicking it skips the play position to the mapped Cue/ Loop In Point and holding it lets
playback run as long as you hold it. By releasing the button, the play positions skips
back to the Cue/Loop In and playback is still paused.
%
Activate Quant in the Master
Panel to get absolute seamless
Hot Cue Jumping..
6.7.5 Beatgrid Panel (Grid Panel)
The Beatgrid is the basis for syncing multiple tracks and setting perfect loops. It is a visual
reference for the DJ, which shows the tempo structure of a track.
The Beatgrid Panel (short: Grid Panel) gives control over the Beatmarker, Beatgrid and
the stored BPM of a track.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 52
Working with Beatgrids
To guarantee that all Tempo, Loop and Move Controls work exactly, you have to verify the
Beatgrid for your tracks.
1.
Analyze a track (see chapter 7.8.2, Analysis) and load it into a Deck.
2.
Click the “+” in the Waveform Display to get a more precise view.
3.
At the beginning of the track, check the Beatmarker: if it is not set correctly on the
beat, use the Move Beatmarker Buttons to correct it. Alternatively, you can manually
set a Beatmarker at the position of your choice by using the Cue Panel. To set an
Auto-Beatmarker manually click the Auto Button.
4.
5.
Go from the Beatmarker slowly forward in the track and check if the Beatgrid sits correctly on the beat. In Snap Mode you can click in the Waveform to audibly check the
position of the Grid. You can turn on Tick in the Master Panel (Global Section) for a better audible feedback while playback. If it is not set correctly, adjust it with the Widen
and Tighten Beatgrid buttons, the “x2”/”&divide;2” buttons or the Tap button. You can type in
a tempo into the Tempo Display after double-clicking into it, too. All adjustments affect
the stored tempo of the track and edit the Grid, which depends on the tempo.
%
%
Left mouse-click moves the
Beatmarker in fine steps, right/ctrl-click in coarse steps.
Left mouse-click changes the
Grid in fine steps, right-/ctrlclick in coarse steps.
%
If no Beatmarker is set, enable Place AutoGrid-Marker in
Preferences &gt; File Management &gt; File
Management &gt; Analyze BPM Range.
Go on until you reach the end of the track. When the Beatgrid sits correctly on the
beat during the whole track, click the Lock Beatgrid button and you are done – you
defined a very precise tempo permanently for this track.
Example Pictures
The Beatgrid is too tight, so you have to widen it.
The Beatgrid is too wide, so you have to tighten it.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 53
This Beatgrid is perfect.
Auto-Beatmarker
Traktor automatically sets a Beatmarker on the first bass drum it detects during the
analysis. So when you analyze your tracks a first Beatgrid is built based on the tempo
Traktor has determined.
► To rebuild the automatically set Beatgrid click on the Auto Button.
Manual Beatmarker
Aside from using the Auto-Beatmarker function you can manually set a Beatmarker with
the Cue Panel:
1.
Search for a good downbeat in the track and move the play position exactly on it.
2.
Click the Cue button (Transport Controls).
3.
In the Cue Panel choose Store and then the Cue Type Grid.
4.
Optionally type in a name into the Cue Name Display for the Beatmarker.
%
Use Snap Mode to position the
marker exactly on the beat. If
the beat is not detected correctly, deactivate Snap Mode.
Deleting Beatmarkers
Deleting a Beatmarker has to be done in the Cue Panel:
1.
Navigate to the Beatmarker by using the Next/Previous Cue Point Buttons, the dropdown
menu next to the Cue Name Display or by clicking the white Gridmarker in the Stripe.
2.
Click the Delete button to delete the Beatmarker permanently.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 54
Lock the Beatgrid
If Beatmarker and Beatgrid are set, you can lock your result by clicking the Lock Button.
► After clicking Lock all buttons in the Grid Panel are deactivated.
► The stored tempo (BPM) is locked and cannot be changed until you unlock it by clicking Lock again.
► All tracks with locked Beatgrid get a small Lock Icon as Browser Icon.
Tick (Audible Beatgrid)
To get an audible feedback of the tempo and where the Beatgrid is set you can activate
a ticking sound similar to a metronome. It should tick simultaneously to the beat.
► Click on the Cue Button.
► Click on the Tick button in the Master Panel.
► Click the Tick button again to deactivate it.
%
In External Mixer Mode you also
have to activate the Cue button inside the Internal Mixer to hear the
Tick.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 55
7. Using the Browser
The Track Browser is designed to help manage your songs, giving you easy and fast access
to them and to your playlists.
7.1 Importing Tracks and Playlists
Most probably you already have tracks and playlists on your computer. This chapter describes how to import them into the TARKTOR Track Collection.
7.1.1 Compatible Music File Formats
!
You have to install Windows
Media Player to be able to use
WMA files in TRAKTOR.
TRAKTOR supports the following music file formats:
► MP3
► AAC (M4A)
► WAV
!
► AIFF
Music files that are DRM-protected cannot be played back in
TRAKTOR. This affects e.g. AAC-tracks
bought in the iTunes store.
► WMA
► FLAC
► OGG Vorbis
7.1.2 Importing Music Folders
TRAKTOR offers an easy import function for tracks stored on your hard drive:
1.
Right-/ctrl-click on the Collection icon in the Browser Tree.
2.
Choose Import Music Folders from the menu.
By default this process imports all music files contained in the “My Music” folder of your
operating system.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 56
If you have stored your tracks in other folders or on external storage devices, you can add
these folders to the list of TRAKTOR Music Folders as follows:
1.
Open Preferences &gt; File Management &gt; Data Location.
2.
Click Add on the bottom of the right window.
3.
Browse to your Music Folders.
4.
Confirm with OK.
5.
Repeat to add all of your Music Folders.
!
Subfolders are automatically
included in the scan. You don’t
need to add subfolders to this list.
7.1.3 Playing Tracks managed by iTunes
If you have organized your tracks with iTunes the TRAKTOR browser offers direct access
to your iTunes Library and your iTunes playlists:
1.
Click on the iTunes icon in the Browser Tree.
2.
Browse through the Library and the playlists as you would do in iTunes.
3.
Load a track into the Deck, as you would do from a normal TRAKTOR playlist.
Note
The iTunes Tree Node represents a read-only view of your iTunes Library and playlists. All
editing functions are not available in this view.
When playing a track from the iTunes Node it is automatically imported into the TRAKTOR
Collection.
7.1.4 Importing a Selection of Tracks from iTunes
1.
Click on the iTunes Icon in the Browser Tree.
2.
Select the track to import into the Track Collection.
3.
Drag the selection onto the Collection icon.
4.
Alternatively right-/ctrl-click the selection and choose Add to Collection.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 57
7.1.5 Importing iTunes Playlists
► Click on the iTunes Icon in the Browser Tree.
► Select the playlist to be imported.
► Drag the playlist onto the Playlists Tree Icon.
► Alternatively right-/ctrl-click the selection and choose Import to Playlists.
7.1.6 Alternative Import Methods
TRAKTOR offers other alternative methods to import single tracks or a special folder that
is not part of your conventional Music Folder structure:
► Drag and drop a track or a folder from your Mac Finder or Windows Explorer onto the
Collection Icon in the TRAKTOR Browser Tree.
► Drag and drop a track or a folder from the tree structure below the TRAKTOR Explorer
Icon representing all drives connected to your computer onto the Collection Icon.
!
Any track that is played in
a Deck is also added to the
Collection.
► In the same manner you can right-/ctrl-click on a subfolder of the TRAKTOR Explorer
Icon or on a track listed in the window on the right side and choose Add to Collection
from the menu.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 58
7.2 Finding Tracks (Search)
By entering text into the Search Field, the currently displayed list is dynamically narrowed
down to the entries containing the typed string. Note following Hotkeys:
7.2.1 Filtering Playlists
1.
Click in the Search Field or hit Ctrl/Cmd+F
2.
Type a few characters contained in any of the track attributes (i.e. the first characters
of the track title).
3.
As you type, the list displayed on the right side is narrowed down to the tracks containing the typed search string.
4.
Hitting the TAB key leaves text typing mode and turns back to Hotkey control, required
for scrolling the list of results.
!
If the focus is moved into the
search field, all Hotkeys stop
working until you leave the search field!
Note
► Hitting the Enter key on your computer keyboard after entering the search string extends the search to the entire Track Collection.
► Pressing ESC clears the search string and terminates the text entry mode.
► Search strings are recalled for each playlist individually. They have to be explicitly
deleted for displaying the entire playlist.
7.2.2Refining a Search
You can refine a search to a specific subset of metadata fields by selecting one of the
options in the Refine List.
1.
Type a word into the Search Field.
2.
Click the Refine Button behind the Search Field and choose a field from the drop-down
menu.
3.
The list is narrowed down to tracks containing the typed search string in the selected
metadata field.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 59
7.2.3Searching for Similar Tracks
In the Browser List, you will notice a small Magnifying Glass in some of the track metadata
fields. This is used to search for tracks sharing the same content in that specific metadata
field.
► In the Browser List, click the Magnifying Glass next to an artist name.
► TRAKTOR will search for tracks sharing the same content in the Artist field.
► To extend the search to the entire Collection, right/ctrl-click the Magnifying Glass.
7.2.4Search in Playlists
You can call up a list with all Playlists containing a certain track.
► In the Browser List, right-/ctrl-click on a track and choose Show in Playlists.
► A list is shown with all Playlists containing this track.
► Click on an entry to select a Playlist. Its entries are displayed in the Browser List.
7.3 Working with Playlists
Playlists are a good way to organize your tracks and for preparing a set. They represent a
way of grouping tracks and putting them into an order with several advantages over physical record crates:
► One track can be contained in multiple playlists.
► A playlist can be re-ordered and you can reset it to the original order.
► Further advantages are e.g. saving, loading and exporting a playlist.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 60
7.3.1 Creating a Playlist
Method I:
1. Right-/ctrl-click on the Playlist folder icon in the Browser Tree.
2.
Choose Create Playlist from the context menu.
3.
Choose a name for your new playlist and type it in the following window.
4.
Confirm with OK.
5.
Your new playlist will appear under the Playlist folder.
Method II:
1. Select one or more tracks in the Browser List.
2.
Drag these tracks onto the Playlist folder in the Browser Tree.
3.
A dialog opens, asking for the playlist name. Type in a name for your new playlist.
4.
Confirm with OK.
5.
Your new playlist will now appear under the Playlist folder.
7.3.2Adding Tracks to Playlists
► Click and hold one or more tracks, drag it onto a playlist of your choice and keep hold-
ing the mouse button. The view of the Browser List changes and shows the destination
playlist. If you move your mouse now over the content of the playlist, you will see a
red line indicating where the track(s) will be inserted when releasing the mouse button.
!
!
This behavior is shown if the playlist follows its original order.
This behavior is shown if the playlist follows a sorted order.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 61
7.3.3Deleting Tracks from Playlists
Deleting Tracks From One Playlist
There are two ways for deleting tracks. Navigate to the respective playlist, then do as follows:
► Click on one or more track(s) and press the DEL or Backspace key of your computer
!
Deleting one or more track(s)
from the Collection also deletes
it from all playlists!
keyboard.
► Right-/ctrl-click on one or more tracks and choose Delete.
Deleting Tracks From All Playlists and the Collection:
1. Click on the Track Collection icon in the Browser Tree.
2.
Right-/ctrl-click on one or more track(s) and choose Delete.
3.
The tracks will be removed from your Collection and every playlist.
Deleting Tracks From The Hard Disk
1. Right-/ctrl-click on a track and choose Show in Finder (Mac) or Show in Explorer
(Windows).
2.
Then delete the track like you would delete any other file on your hard drive.
3.
Repeat this for all tracks you want to delete.
4.
To remove the tracks from the Collection, too, right-/ctrl-click on the Track Collection
in the Browser Tree and trigger a Consistency Check. In the appearing window choose
Remove.
7.3.4Sorting Playlists
Playlists can be sorted and rearranged in various ways. The new sorting order is not permanent and can be undone with one click on the header of the #-header.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 62
Sorting by Columns
► Click on the Headline of a browser column to sort the Playlist by this column. Click
another time on the Headline to invert the sorting.
► Click on the Headline of the #-column to restore the Playlist to its original order.
► After restarting TRAKTOR all Playlists will be reset to their original order.
Consolidating a new Sorting Order
► Click on the Headline of a browser column to sort the Playlist by this column.
► To make the new order permanent, right-/ctrl-click on the tree icon of the playlist or
right-/ctrl-click on any track and choose the option Consolidate.
Permanently Changing the Position of Selected Tracks within Playlists
► Reset a Playlist to its original order by clicking on the Headline of the #-column.
► Select on one or more track(s) and drag them up or down in the Playlist.
► The red line indicates where the selection drops when releasing the mouse button.
!
This is only possible if the playlist is in its original order, which
you get by clicking on the header of the
#-Column.
► This changes the order permanently.
7.3.5Organizing Playlists in Folders
To keep a better overview you may want to organize your Playlists in folders and group
them together logically, e.g. in a folder called Live Gigs or Mixtapes. To create a Playlist
Folder, do as follows:
1.
Right-/ctrl-click on the Playlist folder icon in the Browser Tree.
2.
Choose Create Folder from the context menu.
3.
Choose a name for your new Playlist Folder and type it in the following dialog.
4.
Confirm with OK.
5.
Your new Playlist Folder will appear under the Playlist folder icon.
6.
You can now add Playlists to this folder via drag-and-drop.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 63
7.3.6Collection Subfolders
► The subfolders below the Collection icon contain views of your Collection grouped by
Artists, Releases, Labels or Genres. A number indicates the current number of entries
in this category.
► Double-click to expand them and get access to your Collection grouped by the respective entries.
Example:
► Double-clicking Artists expands the Playlist and lists all artists and the number of
their tracks inside your Collection.
► Click on an artist name to show all tracks from this artist in the Browser List.
7.3.7 Favorites
The Favorites Window is a navigational tool and is located at the top of the Browser. If you
do not see the Favorites, go to Preferences &gt; Layout Manager &gt; Browser Details and activate Show Playlist Favorites.
%
You can assign any of the file
browser folders or a playlist to
a Favorite.
Three of the Favorites are pre-assigned:
► Track Collection
► History Playlist
!
Dragging another playlist on an
already assigned favorite will
replace the favorite playlist with the new
playlist.
► Preparation
Do the following to create and use a Favorite:
1. Click the Playlists folder to browse its contents.
2.
Click, hold and drag the playlist name onto a free Favorite icon.
3.
From now on, you can access this playlist at any time by clicking on the Favorite icon
with the mouse.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 64
7.3.8 Exporting Playlists
By exporting a Playlist you create a folder containing the tracks in the Playlist along with
the Playlist file.
To export a playlist proceed as follows:
1.
Right-/ctrl-click on the Playlist and select Export Playlist from the context menu.
2.
Enter a name for the exported playlist.
3.
Enter a destination path.
4.
Confirm with OK.
7.3.9 Importing Playlists
Importing Playlists can be done in several ways:
Method I
1. Locate the Playlist in the Traktor Explorer inside the Browser Tree.
2.
Drag-and-drop the playlist file onto the Playlists folder in the Browser Tree or onto a
Playlist Folder you have created.
3.
The playlist and all contained tracks will be added to your Track Collection.
Method II
1. Locate the playlist file (*.nml) in the Windows Explorer or Mac Finder.
%
2.
Drag-and-drop the playlist file onto the Playlists folder in the Browser Tree or onto a
Playlist Folder you have created.
3.
The Playlist and all contained tracks will be added to your Track Collection.
With this functionality you also
can import playlists from previous Traktor versions after you have
exported them from there.
Method III
1. Right-/ctrl-click on the Traktor Playlists folder or a Playlist Folder you have created
and choose Import Playlist.
2.
129.The Playlist and all contained tracks will be added to your Track Collection.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 65
7.3.10 Printing Playlists
For creating printable versions of playlists TRAKTOR offers a function to export Playlists
in a web browser readable format (HTML).
1.
Right-/Ctrl-Click on the Playlist in the Browser Tree.
2.
Choose Save as Webpage.
3.
Enter a name for the Playlist.
4.
Enter a destination for the exported file.
5.
From the List Options select the columns you want to add to the file.
6.
Confirm with OK.
7.3.11 More Playlist Functions
Right-/ctrl-click on a Playlist to find the following additional options:
► Analyze: This analyzes the tracks contained in the selected Playlist.
► Rename: This allows you to rename the selected Playlist.
► Clear Playlist: This removes all tracks from the selected Playlist.
► Delete Playlist: This deletes the selected playlist. It will not delete the tracks from your
Track Collection.
► Reset Played State: This removes all Track Icons from the Icon Column in the Browser
List.
7.3.12 History Playlist
The History Playlist is a special playlist that gives you information about what tracks you
have played during a gig.
It is very useful if you have a Playlist of the actually played tracks of an evening or just to
review, what you were doing last night.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 66
Creating a History Playlist
► You don’t need to do that – TRAKTOR does that for you!
► After closing and re-opening TRAKTOR the History Playlist in the Browser Tree is
cleared, but it’s stored in the folder “My Documents\Native Instruments\Traktor\History”
(Win) and “~/Native Instruments/Traktor /History (Mac)”.
► Each History Playlist is named with the date and time you end your session and will
be created after every session you make.
Tips On Using History Playlist
It’s a good habit to re-import History Playlists of successful evenings to use them for your
next gigs.
If you are already working with TRAKTOR months (or years!), the list of History Playlists
can become very large, often containing playlists with only a few tracks. This little trick
might help:
1.
In the Windows Explorer/Mac Finder navigate to your Traktor folder and open the
History (Windows: My Documents\Native Instruments\Traktor\History; Mac: ~//Native
Instruments/Traktor)
2.
You will see all your History Playlists.
3.
As a rule of thumb, every track in a list equals around 1 kb. This means, all Playlists
with 5 kb or below will have most likely not more than 4-6 tracks contained in
them.
4.
These can usually be deleted, making browsing in the History Playlists more convenient.
Another good hint is to drag the History folder onto one of the Favorite Playlists for faster
access.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 67
7.4 Editing Track Metadata
Whether you are performing live or working in the studio, TRAKTOR gives you the tools to
keep your Track Collection organized.
&amp;
TRAKTOR PRO directly writes the
file tags into your music files!
Each track in your Collection has track properties (“tags” or “metadata”) such as Song
Title, Artist Name, Album Name, Cover Artwork, etc. TRAKTOR allows you to edit and add
track properties with two methods.
7.4.1 Editing Track Properties via Inline Editing
1.
In the Browser List, click on a track to highlight it.
2.
Click again in the field you want to edit, e.g. the artist name.
3.
A cursor will be placed inside the property field.
4.
Edit the artists’ name.
5.
Click once in another property field to edit its contents.
6.
Hit the Enter key on your keyboard to exit Inline Editing Mode and confirm your entries
or hit Escape to abort editing.
!
If you are using the iTunes functionality we recommend editing
the tags of your tracks only in iTunes!
7.4.2Editing Track Properties via the Edit Dialog
Not all properties of a track are visible in the Browser List. To get access to all available
properties of a track, use the Edit Dialog. This dialog also allows to contemporarily editing
a selection of tracks, as described in the next section.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 68
Edit Dialog
Editing a Single Track
1. Select a track in the Browser List by clicking it.
2.
Right-/Ctrl-Click the selected track and choose Edit from the context menu.
3.
The Browser List turns into the track Edit Dialog.
4.
Edit the desired information for your track.
5.
Use the drop-down menu next to a track property to select a property already stored
in your Track Collection.
6.
At the bottom of the dialog you find a button called Restore to undo any changes you
have made. To apply the changes, click the button labeled Apply or OK. You can abort
editing by clicking Cancel.
Editing a Selection of Tracks
1. If you want to edit a selection of tracks (e.g. all tracks of an album), select them and
choose Edit from the context menu, (just as you did for editing a single track).
2.
In the Edit Dialog you will notice that most of the checkboxes beneath the attributes
are unchecked and most of the fields void.
3.
At the bottom of the Edit Dialog you will notice 3 new buttons called Previous, Select
All and Next. The buttons are used to browse your selection of tracks.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 69
4.
The checkboxes indicate which of the attributes have the same value among the selected tracks. At the same time they indicate that the field will be written into the
metadata of the selected tracks when applying the changes.
5.
If you want to change an attribute globally for all selected tracks (e.g. to write an Artist
Name), edit this field, make sure that the box beneath is checked and press Apply or
OK.
6.
If you want to edit the tracks of your selection one by one, use the Previous and Next
buttons at the bottom of the dialog to step through the list.
7.
Clicking Restore will undo your changes.
8.
To abort editing click Cancel.
7.5 Track Icons
It is important to overview your set with one look when you are performing in front of an
audience.
The icon column gives valuable information about the history of a track and can be sorted
to align the tracks in their historical sequence. Here is a list of each icon and its meaning.
► The letters A, B, C and D identify the tracks currently loaded into the Decks.
► A Check Mark means that the track has been played in one of the Decks.
► An Exclamation Mark identifies tracks not found at the files’ previous location. A reason for this could be that a storage medium is unavailable, the location of the track
has been changed or the track has been renamed.
► A Lock marks tracks with a locked Beatgrid and Tempo.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 70
Sorting by this column orders the tracks as follows:
► Already played tracks on top.
► Currently playing tracks in the center.
► Not played tracks below.
► Missing tracks at the bottom.
7.6 The Preview Player
Traktors Browser provides a small Preview Player to prelisten to tracks without loading
them into a Deck. This functionality especially is designed for Internal Mixer Mode. The
preview signal is sent to the Monitor Output. To prelisten a track in the Preview Player you
can:
► Drag-and-drop a track from the Browser List onto the Preview Player.
or
!
To use the Preview Player you
need a multi-channel soundcard and setup an output for Out Preview
in Preferences &gt; Audio Setup &gt; Output
Routing.
► Click the small Headphones Icon in the Prelisten column of the Browser List.
The advantage of using the Preview Player is that you do not need an additional Deck.
Also the Played State and Play Count of the tracks will not change.
► You can pause the Preview Player by clicking on the small Play/Pause Button.
► Skip through the track by clicking the small Stripe.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 71
7.7 Cover Art
TRAKTOR has several features for working with cover art for your tracks. It not only shows
it, you also can assign cover art to your tracks from image files on your hard drive.
7.7.1 Show Cover Art
Cover Art Window
TRAKTOR provides a Cover Art Window underneath the Browser Tree. You can activate or
deactivate it in the preferences:
► Go to Preferences &gt; Layout Manager &gt; Browser Details and check or uncheck Show
Cover Art.
List Window
There is a column for cover art in the Browser List. To activate or deactivate it do as follows:
► Right-/Ctrl-Click on the Headline of the Browser List and check or uncheck Cover Art.
7.7.2 Editing Cover Art
TRAKTOR can import cover art from JPEG-files on your hard drive and even delete already
assigned cover art of the tracks in your Track Collection.
It works as follows:
Import
1. Right-/Ctrl-Click on a track and choose Import Cover.
2.
A dialog appears and you have to show TRAKTOR where the image file for cover art
is stored.
3.
Select it and confirm the dialog.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 72
4.
The cover art now is stored inside track file.
5.
You also can mark several tracks and import cover art for all selected tracks at
once.
Delete
1. Right-/Ctrl-Click on a track and choose Delete Cover.
2.
The cover art is now completely deleted.
3.
You also can mark several tracks and delete the cover art for all selected tracks at
once.
7.8 Collection Maintenance
Working with the browser before the gig or in a life situation can be very intense. You need
to keep track of many things such as removing obsolete tracks, relocating tracks that have
been moved to another folder on your HD and much more.
7.8.1 Consistency Check
The Consistency Check Report provides an overview of the current state of your Track
Collection, providing options to help you managing it.
► In the Browser Tree, right-/ctrl-click the Track Collection Icon and select Check
Consistency from the menu.
► Once TRAKTOR has checked consistency, the Consistency Check Report will appear
showing the totals of its findings.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 73
Show Overview/Missing Tracks/Tracks to Analyze
The Consistency Check Report gives you information about the following:
► Total Tracks: The total number of tracks in your Collection.
► Tracks Missing: The total number of tracks that have been deleted from your hard
drive or moved from their original location.
► Tracks Not Analyzed: The total number of tracks that have not been analyzed.
► Tracks Missing Stripe: The total number of tracks that have been imported and analyzed but their Overview Waveform (Stripe) has been moved or deleted.
► Total Tracks To Analyze: The total sum of Tracks Missing Stripe and Tracks Not
Analyzed. This is the total amount of tracks you need to analyze.
Relocate Missing Tracks
The Consistency Check Report allows you also to relocate the references to tracks that are
missing from your Collection.
1.
Click the Relocate Button.
2.
Relocating tracks in a folder that contains many subfolders can be a lengthy process.
Don’t hesitate to interrupt relocation - this will not damage your Collection consistency.
3.
A standard operating system dialog window will appear.
4.
Use it to browse your hard drive for the folder where to your missing tracks have been
moved.
5.
To find multiple tracks in different folders, choose the top-level folder where they are
stored. You can even choose your main hard drive folder.
Remove Missing Tracks
► If you no longer want these missing tracks to be referenced in your Collection, delete
their references by clicking the clicking on Remove Button.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 74
Analyze Tracks
► If you have tracks in the Collection that are not analyzed yet, you can analyze these
now by clicking the Analyze Button.
Show Consistency Check on Startup
The Consistency Check Report can be set to display each time you open TRAKTOR. Please
be aware that this function could be unpractical if you are using TRAKTOR whilst performing live and you want keep the startup time to a minimum.
1.
Go to Preferences &gt; File Managemen &gt; File Managementt.
2.
Put a check in the box labeled Show Consistency Check Report on Startup and close
the Preferences.
3.
The Consistency Check Report will now open each time you start TRAKTOR.
7.8.2Analysis
Traktor has an analyze process to collect all important information of your tracks. The
analysis scans the track and returns the following information:
BPM Estimate
► The BPM Estimate is more or less accurate according to the type of music. Read more
about verifying the BPM Estimate and about how to create a Beatgrid in chapter 6.7.5,
Beatgrid Panel (Grid Panel).
Gain Value
► Each track has a perceived loudness, based on its musical properties of the track and
on the involved mastering techniques. The Gain Value established during the analysis
is a very accurate estimation of the optimal setting of the channel Gain knob to match
the loudness of a track to 0dB.
► To use this gain estimation when loading a track into a Deck, enable the Auto Gain
function, available in the Preferences.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 75
Stripe
► The analysis process creates the small representation of the Waveform underneath the
wave display (Stripe). If the Stripe of a track is missing it has not yet been analyzed.
Auto Analysis
Traktor can start the analysis automatically when loading a track into a Deck or directly
after importing it into your Collection:
► Open Preferences &gt; File Management &gt; File Management for options on background
track analysis.
► Read more about the analysis options in chapter 14.10.1 (File Management).
7.8.3Data Location
TRAKTOR has functions that create and reference certain file types. These file types are
stored in their own default directories. However, you can change the directory paths by
using the Data Location Preferences menu.
► Open Preferences &gt; File Management &gt; Data Location.
You can change the directory path for the following file types by clicking on the button
with the exclamation mark (…!) after the current path:
► Root Directory: the file path TRAKTOR follows for loading and storing Collection information and settings.
► iTunes: the file path to your iTunes Library (this path has to be identical with the settings in iTunes).
► Music Folders: here you can specify the location of folders and hard drives to be
scanned for supported music files during the Music Folders import.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 76
7.8.4Other Maintenance Functions
► Reset Played State: Resets the play count and the Track Icon next to any track that
has been played.
► Relocate: Opens a dialog in which you can navigate to the folder containing the missing track(s). Very useful, if you e.g. restructured your Music Folder.
► Analyze (Async): Starts analysis for the selected track(s).
► Show in Explorer/Finder: This will display the track in the Windows Explorer or Mac
Finder, according to your operating system.
► Search in Playlists: Searches the selected track(s) in all playlists and returns a list with
all playlists containing the selected track(s).
7.9 Working with Audio CDs
7.9.1 CD Text
In the past, tracks of Audio CDs were displayed as Track01, Track02, etc.
But now, if you insert an Audio CD that shows CD-text, you will be able to see this data
in TRAKTOR, e.g. the correct track title or the artist name.
!
Not all commercial Audio CDs
show these additional info
texts.
7.9.2Audio CDs and Favorites
► If you drag the Audio CD Icon onto a Favorite, this Favorite keeps assigned to the audio CD drive, even if you remove a CD.
► If you do not have an audio CD loaded in your CD drive, the Favorite will be displayed
with a Missing Icon, shown as red cross.
7.9.3 Eject CD
You can eject a CD also from within TRAKTOR.
► Right-/ctrl-click on the Audio CD icon and choose Eject CD to eject the CD. TRAKTOR PRO / TRAKTOR SCRATCH PRO – 77
7.10Working with MP3-Players
TRAKTOR allows you to play tracks from your MP3 player.
► Start TRAKTOR and plug your MP3 player into your computer. TRAKTOR will then
recognize your MP3 player as hard drive and display the hard drive icon in the Browser
Tree - this may take up to 10 seconds.
► When first selecting the MP3 player, the message Loading will appear to let you know
that TRAKTOR is reading the track information.
!
Plugging and un-plugging the
MP3 player while tracks are
playing may cause the audio to stop
briefly. Take extreme care not to unplug
the MP3 player when playing a track
from it!
► When finished, you will be able to select any track to play as you normally would from
your hard disk drive.
7.10.1iPod
The Apple iPod uses a unique file system for storing music. When you connect an iPod
to your computer Traktor will recognize it and shows the iPod in the Browser with its
name.
► Double-click the iPod to get access to the playlists and tracks stored on the iPod.
Note:
You can’t play protected files that you have bought in the iTunes Store.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 78
8. Using the Internal Mixer &amp; the Crossfader
The Internal Mixer is the nerve center of Traktor. With the Internal Mixer you can control
the mix and modulate the sound of your tracks for smooth transitions.
8.1 Channel Faders
The Channel Faders adjust the channel volume. Their Channel Level Meters help you to
adjust the volume of the next track with the currently running track.
► The Channel Faders are only visible, if full size Decks are activated.
8.2 Crossfader
The Crossfader enables you to make transitions between Decks by dragging it from one
side to the other.
!
Advanced control features are
described in chapter 11 (Mouse
Control for Faders and Knobs).
8.2.1Crossfader Assign Buttons
With the Crossfader Assign Buttons you define, which Decks are audible on the left and
right position of the Crossfader.
► A Deck that is not assigned to one side of the Crossfader is only controlled by the
Channel Fader.
8.2.2Manual Crossfade
► Click, hold and drag the Crossfader from one side to the other.
► Alternatively, you can use the Crossfader Switch Buttons. With every click they move
the Crossfader stepwise in the dedicated direction.
► Double-clicking the Crossfader resets it to the middle position.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 79
8.2.3Automatic Crossfade
Crossfading can also be automated by using the Crossfader Move Buttons.
► If you click a Crossfader Move Button and the Crossfader will automatically fade to the
respective side.
► To stop the transition, click the Crossfader Move Button again.
► You can adjust the Auto Crossfade Time in Preferences &gt; Mixer &gt; Crossfader.
8.3 Equalizer
The Equalizer is an important mixing tool. It modulates the sound of your mix separated
by frequency.
The EQ Knobs have all the advanced functionality described in chapter 11 (Mouse Control
for Faders and Knobs).
8.3.1Equalizer Types
%
Traktor offers 4 different types of EQ, modeled after today’s top DJ mixers.
To change the EQ type go to Preferences &gt; Mixer &gt; EQ Selection.
Classic
The Classic Equalizer is the standard, classic TRAKTOR 3-Band EQ. It offers controls for
adjusting the Low, Mid and High range frequencies of each deck.
It’s always a good idea to use
the EQs during a transition to
avoid clipping that can happen easily
when two tracks play together with full
volume.
Each knob controls its frequency band by +12/-24 db. It also offers Kill Switches that cut
the frequency entirely when activated.
P600
The P600 is a standard club DJ mixer EQ with 3 bands (low, mid and high). It works like
the Classic EQ, but offers a range of +12/-26 dB and the Kill Switches cut the frequencies to -26 dB.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 80
Nuo4
Nuo4 is an emulation of the EQ found on the Ecler Nuo4 four channel DJ mixer. It offers
3-band equalization (low, mid, high). The adjustment range for low and mid frequencies
is +10/ -30 dB and for high frequencies +10/ -25 dB. Like the Classic and P600 Mixer
Types it offers Kill Switches for all frequencies, but set them to -30/-25 dB.
XONE:92
XONE:92 is an emulation of the EQ found on the Allen &amp; Heath XONE:92 DJ mixer. It is
unique that it offers 4-band EQ controls (low, mid-low, mid-high and high). The high and
low bands have infinite attenuation (total kill) with a sharp 12 dB/oct roll-off. The mid
bands offer -30 dB of cut.
8.4 Gain, Cue and Pan
8.4.1Gain
With the Gain Knob you can control the pre-fader level of each channel shown in the Level
Meters of the Channel Faders.
► Gain is only visible, when full size Decks are activated.
► Traktor offers a powerful Autogain function enabled in Preferences &gt; Mixer. This
function relies on the gain values extracted from the Analysis process.
8.4.2Cue
With the Cue Button you can pre-listen the Deck via the Monitor Outputs.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 81
8.4.3Pan
With the Pan Knob you can control the balance between the left and right stereo channel
for each Deck individually.
► The Pan knob is only visible, when the Advanced Panels are activated.
!
To use the cue functionality a
multi channel audio device is
required. Cue is only visible, when full
size Decks are activated.
8.5 Filter, Key and Effect Insert8.2
8.5.1Filter
The Filter Knob provides a bipolar filter.
► In center position, the filter is inactive.
► Turning the knob to the right activates a high-pass-filter. The more you move it to the
right, the more low and middle frequencies are cut out.
► Turning it to the left activates a low-pass-filter. The more you move it to the left, the
more high and middle frequencies are cut out.
► In Preferences &gt; Mixer &gt; Filter Selection you can choose between Filter:92, emulating
Allen &amp; Heaths Xone Series’ filters and Filter for a regular ladder filter.
8.5.2Key
With the Key Knob you can control the tone pitch of a playing track without affecting its
tempo. Key control has to be activated by pressing the small button underneath the
knob.
► In center position, the track is played at original pitch.
► Turning it left or right pitches the tone down or up.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 82
8.5.3Effect Insert
The two Effect Insert Buttons in each channel insert the effect units into the signal
chain.
%
Turning off an effect with the
Insert Buttons stops processing of this effect instance and therefore
saves CPU power.
► You can insert both Effect Units in one channel.
► You can insert the same Effect Unit in more than one channel.
► Insert an Effect Unit on all channels to simulate a Master Effect.
► When switching an Effect Unit to External Send Mode, the according Insert Button is
disabled.
8.6 The Internal Mixer in External Mixer Mode
Traktor can be used with an external mixer that replaces the Internal Mixer. However,
you can use certain features of the Internal Mixer also in External Mixer Mode.
The controls of the Internal Mixer that are not used when using an external mixer are
placed on the inner strip (EQ and Channel Faders). These controls are disabled and hidden
in External Mixer Mode.
The controls of the Internal Mixer that can be combined with an external mixer are placed
on the outer Strip of the Internal Mixer:
► The Filter can effectively be combined with the EQ’s on the external mixer.
► Key and FX can also be used in combination with an external mixer.
► The Gain Knob allows you to apply an additional volume boost to your tracks.
► The headphone Cue Button is used to make the beat tick audible on that channel if
Tick in the Master Panel is activated.
!
The Master Volume Knob in
the Master Panel works also in
External Mixer Mode and can be used to
raise or lower the overall volume.
► The Pan Knob is useful as not all hardware mixers have an individual panning per
channel.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 83
9. Using TRAKTOR with an External Mixer
Traktor can either replace an entire DJ setup or it can just replace your decks. In this
case you will be using TRAKTOR in combination with an external mixer. This allows you to
mix your digital tracks with the analog feel of the knobs and faders of the mixer.
9.1 Requirements
The requirements of your hardware depend on the complexity of your setup.
9.1.1 Mixer
In External Mixer Mode, each deck of TRAKTOR is routed to one of the channels of your
mixer. The inputs required for TRAKTOR decks are LINE level inputs - the same as for
CD players.
The most basic TRAKTOR setup uses two playback decks and therefore requires a twochannel-mixer.
Adding a third and fourth deck can extend this setup. Each additional source requires an
additional input on your mixer.
An even more advanced setup integrates the TRAKTOR send effects. Using them not only
requires one more channel on your mixer but also an effects send output on the mixer to
feed the effects directly from the mixer. Usually this output can be controlled either via
FX send knobs or buttons on each channel of the mixer.
%
You also can use the Preview
Player function of the Browser
in External Mixer Mode. This requires an
additional channel on the mixer.
9.1.2 Audio Device
For connecting all decks to the mixer an audio interface with as many stereo channels as
used decks is required. TRAKTOR does not support two sound cards side by side, but
there are ways to aggregate sound cards to make them appear as single audio device in
TRAKTORs audio setup.
%
Native Instruments Audio
8 DJ is specially designed to fit
the requirements of Traktor!
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 84
If you want to use the send effect feature, the audio interface also must have an additional
stereo input for the effects send signal coming from the mixer.
If you have enough available channels on your hardware also the Preview Player can be
connected to a separate output of the soundcard.
Traktor Scratch Pro
If you are using Traktor Scratch Pro the Audio 8 DJ or a Traktor Scratch Pro
Certified Mixer is required!
9.2 Physical Setup
This part describes the setup of the hardware in a general way. The exact setup depends
on the hardware you use.
1.
At first make sure that the audio interface is correctly installed, connected and fully
functional on your computer.
2.
Connect the outputs of the external audio interface to the mixer inputs. Each stereo
output channel of the external audio interface connects to one of the stereo channel
inputs of the mixer. With Traktor Scratch Pro use the Multicore Cables like described
in chapter 13 (TRAKTOR SCRATCH PRO Functionality).
3.
Connect your headphones to the mixer and the mixer-outputs to the amplifier system
driving your speakers.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 85
9.3 Software Setup
At the first start of Traktor the “Setup Wizard” lets you choose the basic setup for
External Mixer Mode. But it is also possible to do the adjustments directly in the
Preferences. To do so, open Preferences &gt; Audio Setup by clicking the dedicated Preferences
Button or use the Application Menu and continue directly with step 3.
1.
In the Setup Wizard select the option External Mixer.
2.
Confirm your choice by pressing OK. This opens the Audio Setup page of the
Preferences.
%
If you have already passed the
Wizard and did not choose the
External Mixer Mode, you can re-trigger
it by clicking on Setup Wizard in the Help
tab of the Application Menu.
3. Drop-down the Audio Device list and select your external audio interface.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 86
4. Set a latency and sample rate your system can handle. Typically use a higher latency
at first, such as 15 ms.
%
For now use a moderate setting. You can change this later
and test out, what your system is able
to perform.
5. Open the Output Routing page to assign the outputs of TRAKTOR PRO to the physical
outputs of your audio interface.
Verify that External Mixer Mode is chosen.
1.
Assign Out Channel A, B, C and D to all outputs of the external audio interface that are
connected to the mixer. Note that you have to connect a pair of outputs to each channel,
so Channel A typically connects to Outputs 1 and 2 of your audio interface, Channel B
to Outputs 3 and 4, and so on. To use send effects you have to assign the Out Send,
too (typically to the channel that is connected to the fx return of the mixer).
2.
If you want to use the send effects, go further to the Input Routing page and assign
the Input Send. Typically this is fed by the fx send out of the mixer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 87
3.
Close the Preferences by clicking on the Close button.
Traktor Scratch Pro
When using Traktor Scratch Pro you also have to add the Timecode Setup (see
chapter 14.3, Timecode Setup).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 88
10.Using the Global Section
The Global Section in Traktor contains the Master controls. It also lets you control the
effects, the Master Clock and allows audio recording of your mixes.
10.1Master Panel
The Master Panel in the center of the Global Section provides the main volume and playback mode controls.
10.1.1Master Volume Control
► The Master Volume Knob controls the main output.
► Default position (no boosting, no attenuation) is at 2’o’clock.
► Adjust it so that the Master Level Meter in the Header uses the full available range.
► In External Mixer Mode the Master Volume Knob serves as an overall gain to adjust the
output of TRAKTOR to the input requirements of the external mixer.
10.1.2 Headphone Controls
PH Vol
► The Vol knob controls the volume of the Monitor Output for your headphones.
Mix
► The Mix knob lets you mix the cued signal with the master signal in your headphones.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 89
Tick
► With the Tick button you can activate an audible beat tick that works like a metronome
and helps you editing Beatgrids.
► It is only audible on signals cued over the headphones (Internal Mixer Mode).
► In External Mixer Mode it is laid over the channel signal, when Headphone Cue on the
Internal Mixer is active.
10.1.3 Control Modes
Traktors Control Modes affect the mouse click and cue point behavior during playback,
allowing synced navigation in the track and accurately set Cue Points.
All modes can be activated independently. They work globally for all Decks. When activated, the Mode Buttons (Snap, Quant, CD Mode) are lit blue.
Vinyl Mode
None of the Mode Buttons is activated. Start and stop playback at any position. Click and
drag the waveform back and forth like a record.
Snap Mode
In Snap Mode, the playback position jumps always to the next detected beat. Activating
Snap helps you to work exactly on a beat while setting up Cue Points and Loops.
► With Snap activated you can set Cue Points and Loops only on detected beats.
Quantized Mode
Quant Mode lets you jump between Cue Points and Stored Loops seamless and without
losing sync and works also with Hot Cues.
► Skipping in the track in Quantized Mode brings the play position next to the destination, but without losing sync.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 90
CD Mode
CD Mode emulates the behavior of CD players (before the invention of the touch sensitive
jog wheel).
When pausing the deck, a short stutter loop is played at the current playback position.
This loop can be moved forward and backward to adjusts its position. Finally pressing Cue
sets a Cue Point at that position. It works like this:
1.
Activate CD Mode in the Master Panel.
2.
Play a track and navigate near the play position where you want to set a Cue Point.
3.
Pause the track by clicking on Play/Pause. The short stutter loop is active.
4.
Go to the Move Panel, chose Beat Jump Mode and activate Fine.
5.
Use the Move Buttons in the Move Panel to change the position of the stutter loop.
6.
When you found the position for the Cue Point finally click Cue in the Transport
Controls. The loop stops playing and the Current Cue Point is set to this position.
10.1.4 Cruise Mode
Cruise Mode serves for automatically playing one track after the other from a playlist or
your track collection.
Engaging Cruise seamlessly takes over playback control:
► The currently playing track continues to play.
► The next song from the playlist will be loaded in the opposite deck and started by
TRAKTOR automatically when the first track reaches its end.
► Then the next song of the Playlist will be loaded and played automatically and so
forth.
Note:
At least one track has to be playing when engaging Cruise Mode.
► To activate it click the Cruise Button in the Master Panel.
► The Crossfader is set automatically to center position.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 91
► The Channel Fader of the playing track is open while the other is closed. At the end of
the playing track it will fade out and the next track will fade in.
► Use a playlist to create an order for the automatic played tracks.
► You can automate Cruise Mode when using it in combination with Fade and Load
Markers to control the transitions. First you have to activate Use Fade In &amp; Out Markers
in Preferences &gt; Loading &gt; Loading.
► You can manually trigger the transition to the next song at any moment by pulling
down the channel fader of the currently playing track.
10.2Master Clock Panel
The Master Clock is a central organ of Traktor and works as tempo reference for the
effects and for the sync function. It also sends a MIDI-Clock signal to external hardware
and software.
%
Cruise Mode will also work when
using an external mixer.
► To show the Master Clock Panel, click on the Metronome Icon on the left side of the
Global Section.
10.2.1Modes
The Master Clock has three operation modes activated by the Manual, Auto and Ext. buttons. In Manual Mode, the Master Clock runs independently from the Decks, in Auto Mode
the Master Clock automatically follows the tempo of one of the playing decks. External
Mode switches the MDI Clock to a receptor for syncing Traktor to a MIDI Clock Signal
coming from an external source.
Auto Mode (Default)
► In Auto Mode the Master Clock always follows the tempo of one of the playing
Decks.
► All manual tempo controls of the Master Clock are disabled in Auto Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 92
► The Master Clock automatically determines which Deck is the best candidate for being
the tempo reference. On this Deck the Master button is activated automatically.
► The automatic choice of the Deck chosen as tempo reference can manually be changed
by clicking on the Master button of another deck.
► When using the Master Clock in Auto Mode, no interaction with the Master Clock
panel is required, so that the panel does not need to be visible.
Manual Mode
► In Manual Mode the Master Clock you keep manual control.
► The Tempo Display shows the tempo of the Master Clock in BPM.
► The yellow area in the Tempo Display shows the offset of the Master Clock towards
the Deck that was manually set to be the Tempo Master by pressing the Master button
on that Deck.
► To adjust the tempo manually, drag the displayed value with the mouse, use the “+”
and “-“ buttons or tap the tempo with the Tap button.
► The Pitch Bend buttons can be used like on regular Decks to nudge the tempo of the
Master Clock.
► The Tick option gives an audible reference about the tempo of the Master Clock on
your headphones.
External Mode
► In External Mode the Master Clock is remotely controlled by a MIDI Clock Signal received from an external source.
► The Tempo of the Master Clock displayed in the Tempo Display may need a few seconds
to lock onto the MIDI Clock Signal.
► In this mode, all manual tempo controls of the Master Clock are disabled.
► The Decks of TRAKTOR can be synced to the Master Clock like in Manual Mode by
pressing the Sync button on the Deck.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 93
► To match the beats between the sending and the receiving TRAKTOR Pro application,
the MIDI Clock sending offset must be adjusted in the sending application.
10.2.2MIDI Clock Send
The MIDI Clock feature gives you the ability to synchronize external hardware to the tempo of the tracks playing in Traktor.
► To start sending a MIDI Clock signal, click the Start/Stop button. Clicking it again stops
sending. When MIDI Clock is active the Start/Stop Button is lit blue.
► By clicking the Sync button, Traktor triggers a MIDI Clock Stop Message immediately; followed by a MIDI Clock Start Message to re-sync the external hardware.
► Before you can send the MIDI Clock signal you have to activate Send MIDI Clock for
your MIDI device(s) in Preferences &gt; MIDI Setup.
%
For synchronizing external hardware with the MIDI Clock, the
Master Clock has to be set as Master
Tempo Source.
► To match the beats between the sending and the receiving TRAKTOR application, the
MIDI Clock sending offset must be adjusted in the sending application.
10.3Effect Panels
Traktor has two individual Effect Units. Their Control Panels are located on the left and
the right side of the Global Section. For switching from either the Master Clock or the
Audio Recorder to the respective Effect Panel, click on the tabs labeled FX1 and FX2 on
either end of the Global Section.
Each of the Effects Units can be inserted to any of the TRAKTOR Decks individually or
contemporarily to more than one Deck at a time by clicking on the FX Assign Buttons found
in the mixer strip of each Deck.
As default Traktors effects are insert effects, but you can use them as send effects,
too.
Each of the Effects Units can be used in 2 modes - Chained and Advanced, described
hereafter. The mode can be switched in Preferences &gt; Effects &gt; FX Panel Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 94
10.3.1Chained Mode
In Chained Effect Mode you can use and control up to three effects in one Panel. It works
as follows:
► Choose the effect(s) you want to use with the Effect Selector (2).
► You can switch on and off every effect in the chain with the 3 Effect On Buttons (4)
and control its amount with the Effect Amount Knobs (3).
► For the whole effect chain you can control the main-signal-to-effect-signal-ratio with
the Dry/Wet Knob (1).
► You can save a specific setting as default with the Snapshot Button (5).
► To recall the default setting of an effect, double-click the effect knob.
10.3.2Advanced Mode
In Advanced Effect Mode you get full control over all parameters of a single effect:
► Choose an effect with the Effect Selector (2).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 95
► With the Effect Parameter Knobs 1 to 3 (3) and Effect Buttons 1, 2 (4) you can modulate the behavior of the selected effect. Available options depend on the chosen effect (see 15.5, Effects in Detail).
► With the Effect On Button (6) you can switch the effect on and off.
► The Dry/Wet Knob (1) controls the main-signal-to-effect-signal-ratio.
► You can save a specific setting as default with the Snapshot Button (7).
► The Reset Button (5) resets all effect settings inside the Panel to the default.
10.3.3Send Effects
The Effect Units can also be used in Send Effect Mode. This is only available in External
Mixer Mode (with a multichannel soundcard) and has to be set up in the Preferences:
► Go to Preferences &gt; Audio Setup &gt; Output Routing and set Mixing Mode to External.
Also set an output of your audio device as Output Send. This output typically shall be
connected to the FX return input of the external mixer.
► Go further to the Input Routing page and set an input of your audio device as Input
Send. This input typically is connected to the FX send output of the mixer.
► Now open the Effects page of the Preferences and set Effect Routing for at least one
Effect Unit to External Send.
► The audio signal that is sent to the Effect Slots is now entirely controlled by the FX
Send knobs or buttons of the external mixer.
10.3.4General Notes
► You may want to use only a selection of available effects. You can pre-select them in
Preferences &gt; Effects &gt; Effect Pre-Selection. Only the pre-selected effects are accessible from the Effect Panels.
► More information about the Traktor Effects is documented in chapter 15.5 (Effects
in Detail).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 96
10.4Audio Recorder Panel
The Audio Recorder in Traktor is used for recording your mixes or an external source
like e.g. your mix with an external mixer, a microphone or turntable. It also is used for
activating Broadcasting.
10.4.1Recording your Mix
► Before you start recording you have to adjust the settings in Preferences &gt; Recording,
especially to define on which channel you want to record and where the recording shall
be saved (see chapter 14.8, Recording).
► To activate the Audio Recorder, click the Tape Icon on the right side of the Global
Section.
► With the Gain knob you can adjust the level for recording. The Recording Meter helps
you to set the right level.
► Start recording by clicking the red Recorder Button. Clicking it again stops recording
and saves the recorded file in the Audio Recordings folder.
► The display shows the actual file size and recorded time.
► By clicking Cut, Traktor saves the current recording and seamlessly starts a new
file for recording.
► To delete the current recording click on the Delete Button.
10.4.2Broadcasting
Traktor gives you the ability to broadcast your mix or a radio show over the internet.
► To start broadcasting, activate the Audio Recorder Panel and click the Broadcast
Button.
► Broadcasting needs to be set up in the Preferences &gt; Broadcasting. The required settings depend on your network and server settings.
► For more information see chapter 15.4 (Broadcasting).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 97
11.Mouse Control for Faders and Knobs
To make your life easier when controlling the software via mouse or touch pad, Traktor
supports a variety of on-screen control features.
11.1Basic Controls
All knobs and faders in TRAKTOR are either controlled by dragging the mouse, by using
the mouse wheel or by clicking the small Plus and Minus buttons next to the knob or
fader. Dragging the mouse is a good way to make dynamic changes, whereas the Plus and
Minus buttons allow more subtle changes and are better suited to set a knob to a specific
value.
Mouse Drag
► Hold your mouse arrow over a knob or fader, then click, hold and drag the mouse up
or down. This will move to the knob clockwise or counter-clockwise and the fader upor downwards.
%
Click, hold and drag a knob
horizontally. The knob will adjust within a finer range.
► Double-Click on the knob or fader to return it to its default setting.
Scroll Wheel
► Hover over a fader or knob and use your scroll wheel to move it either up and down
or clock- and counter-clockwise.
Plus and Minus Buttons
► When hovering over a knob or fader, small “+” and “-“ buttons appear.
► Click them to move the knob or fader and change its value stepwise.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 98
11.2Advanced Control
%
Besides the standard mouse click functions explained above, TRAKTOR offers advanced
functions utilizing Plus and Minus buttons, the mouse wheel and the right mouse button.
If you have a track pad or
mouse without a second button, you can utilize these functions by
pressing and holding the Ctrl key of your
computer keyboard while clicking.
Sensitivities
TRAKTOR offers five sensitivities for stepwise control of parameters:
1.
Right-/Ctrl-click on the “+” or “-“ button to open a menu of five sensitivity options:
min, fine, default, coarse, switch.
2.
Select one of the options.
3.
Click the Plus and Minus buttons or use the mouse wheel to see how the be&shy;havior of
the knob or fader has changed.
Right-/Ctrl-Click Functions
1. Right-/Ctrl-click, hold and drag a knob or fader. A Ghost Pointer will appear in grey,
although the knob or fader itself will not move.
2.
Keep holding the right mouse button, then left-click and hold. This will bring the knob
or fader to the value of the Ghost Pointer.
3.
Keep holding the right mouse button and let go the left mouse button. The knob or
fader will return to its last position and the grey Ghost Pointer remains visible.
4.
If you want the knob or fader to stay at the value of the Ghost Pointer, simply release
the right mouse button after the knob or fader has reached the value of the Ghost
Pointer. The grey Ghost Pointer will disappear, and you can depress the left mouse
button as well.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 99
12.Control via Keyboard &amp; MIDI Hotkeys
All controls in Traktor can be used with your computer keyboard or a MIDI-controller.
Traktor uses settings files (*.tsi-files) to store the mapping for your keyboard and MIDIcontrollers.
%
You also can use a combination
of mouse actions, keyboard and
MIDI Hotkeys to control Traktor.
12.1Keyboard Hotkeys
Keyboard Hotkeys are used to control Trakor with your computer keyboard. Traktor
contains a standard mapping with all basic controls that is loaded by default. You can find
the default mapping documented on the enclosed flyer.
To load another mapping, do as follows:
1.
Open the Preferences by clicking on the Preferences Button or via Application Menu
&gt; File &gt; Preferences.
2.
Click Import.
3.
Navigate to My Documents\Native Instruments\Traktor\Settings (PC) or ~/Native
Instruments/Traktor/Settings (Mac) and choose the file named “settingsfilename.tsi”.
4.
Confirm the dialog and close the Preferences.
5.
Use you computer keyboard to control Traktor.
► You can find an explanation how to create your own mappings in in chapter 15.1
(Hotkey and MIDI Mapping).
► Clicking Application Menu &gt; Help &gt;Downloads will open the TRAKTOR PRO Downloads
website of the Native Instruments Homepage. There you can download several
other Keyboard Mappings.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 100
12.2MIDI Hotkeys
Traktor works with all MIDI-controllers and is installed with settings files for the most
popular controllers on the market.
To set them up continue as follows:
1.
Connect the MIDI-controller like described in its manual with your computer.
2.
Open Traktor and go to Preferences &gt; MIDI Setup.
3.
Activate your controller by double-clicking the Active column in MIDI Input Devices
and MIDI Output Devices.
4.
Click the Import button in the lower left corner of the Preferences window.
5.
Navigate to My Documents\Native Instruments\Traktor\Settings (PC) or ~/ Native
Instruments/Traktor/Settings (Mac) and choose the file named “settingsfilename.
tsi”.
6.
Confirm the dialog and close the Preferences.
7.
Use your MIDI-controller to control Traktor.
► If there is no settings file included for your controller or if you just want to setup your
own mapping, find an explanation how to create your own mapping in chapter 15.1
(Hotkey and MIDI Mapping).
► Clicking Application Menu &gt; Help &gt;Downloads will open the TRAKTOR PRO Downloads
website of the Native Instruments Homepage. There you can download several
other MIDI Mappings.
%
The MIDI Indicator in the
Header will light up whenever
a MIDI message is received.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 101
13.TRAKTOR SCRATCH PRO Functionality
This chapter describes setting up TRAKTOR SCRATCH PRO.
13.1Turntable Setup
13.1.1Hooking up Turntables with the Multicore Cables
Connecting the Multicore Cables with the AUDIO 8 DJ
► The box contains 2 sets of Multicore cables, each set comprising 2 segments that can
be connected with a 7 pin XLR connector.
► Each of the 2 Multicore Cable Sets is used for connecting one Timecode turntable to
TRAKTOR.
► Take one of the the shorter cable segments having the RCA connectors colored in red,
black, yellow and white and connect them to the connectors labeled CHANNEL A on
the rear of the AUDIO 8 DJ by matching the colors.
► Repeat the operation with the second of the shorter cable segments and connect it in the
same manner to the connectors labeled CHANNEL B on the rear of the AUDIO 8 DJ.
Connecting the Multicore Cables with Your Turntables and Your Mixer
► Take one of the longer cable segments having the red and white connectors.
► Unplug the RCA cables of the left turntable from your mixer and connect them to the
female RCA connectors on the cable segment, labeled “Player TT/CD”.
► Plug the two RCA connectors labeled “Mixer TT/CD” into the Phono Inputs on the
mixer that just became available by unplugging the turntable.
► Plug the two RCA connectors labeled “Mixer Line/In” into the Line Inputs of the same
channel of your hardware mixer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 102
► Repeat this operation with the second pair of longer cable segments and the right
turntable.
13.1.2 Test Drive TRAKTOR SCRATCH PRO with Turntables
► Put the Control Records on your turntables.
► Switch your mixer from Phono to Line.
► Set the AUDIO 8 DJ Input Mode for channels A and B to Timecode Vinyl by toggling
through the modes with the INPUT MODE button on the front panel.
► Click on the downwards pointing arrow below the Deck letter and verify that Scratch
Control is chosen as input source.
► Load a track from the Demo Playlist into Deck A and start the turntable.
► TRAKTOR SCRATCH PRO starts calibrating, the blue Absolute Mode Button lights up
and the track is played back.
13.1.3 The Control Zones on Vinyl
The Control Vinyl consists of the following three zones, each with different playback functions.
Lead In – The first few Rounds of the Record
Dropping the needle into the Lead In Zone of the record will skip to the beginning of the
track.
If you turned on the respective option in the Preferences, you can use this to skip back to
the beginning of a track when playing in the Relative Tracking Mode – the tracking mode
jumps to Absolute Mode, making needle drops again possible.
Playback Zone - Main Part of the Record
This is subdivided into 10 tracks on side A and 15 tracks on side B. This zone is used for
regular playback. The divisions are visual markers of time, which do not affect the continuous playback of the loaded track.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 103
Scroll Zone – Last two Tracks of the Record.
Dropping the needle in the Scroll Zone allows you to scroll up and down through your
playlist by manually spinning the record forward or backward.
Whenever you stop the movement of the record, the respective track gets loaded.
To play the selected track, simply place the tonearm back into the Playback Zone.
13.2CD-Player Setup
%
If your track exceeds the 10
minutes Playback Zone it will
continue playing normally in the Scroll
Zone – you have to lift and drop the needle again to stop the playback and switch
to Scroll Mode. Even if you reach the
end of the record, the track will continue
to play as there is an endless groove at
the end of the record!
13.2.1Hooking up CD-Players with the Multicore Cables
Connecting the Multicore Cables with the AUDIO 8 DJ
► The box contains 2 sets of Multicore cables, each set comprising 2 segments that can
be connected with a 7 pin XLR connector.
► Each of the 2 Multicore Cable Sets is used for connecting one Timecode CD-Player
to TRAKTOR.
► Take one of the the shorter cable segments having the RCA connectors colored in red,
black, yellow and white and connect them to the connectors labeled CHANNEL A on
the rear of the AUDIO 8 DJ by matching the colors.
► Repeat the operation with the second of the shorter cable segments and connect it in the
same manner to the connectors labeled CHANNEL B on the rear of the AUDIO 8 DJ.
Connecting the Multicore Cables with Your CD-Players and Your Mixer
► Take one of the longer cable segments having the red and white connectors.
► Unplug the RCA cables of the left CD-Player from your mixer and connect them to the
female RCA connectors on the cable segment, labeled “Player TT/CD”.
► Plug the two RCA connectors labeled “Mixer TT/CD” into the Line Inputs on the
mixer that just became available by unplugging the CD-Player.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 104
► Plug the two RCA connectors labeled “Mixer Line/In” into the Line Inputs of the same
channel (!) of your hardware mixer.
► Repeat this operation with the second pair of longer cable segments and the right
turntable.
When using CD-Players you may run into a lack of LINE level connectors on you mixer. In
this case you can either leave the RCA connectors of the Multicore Cable labeled “Mixer
TT/CD” unconnected or connecting them to another available channel on your mixer.
!
When leaving them disconnected, you loose is the ability to play a regular Audio CD from that
specific CD-Player.
13.2.2Test Drive TRAKTOR SCRATCH PRO with CD-Players
► Put the Control CDs in your CD-Players.
► Make sure your Mixer is switched to the Line Channel where the Mixer Line/In cable
is plugged in.
► Set the AUDIO 8 DJ Input Mode for channels A and B to Timecode CD by toggling
through the modes with the INPUT MODE button on the front panel.
► Load a track from the Demo Playlist into Deck A and start the CD-Player.
► TRAKTOR SCRATCH PRO starts calibrating, the blue Absolute Mode Button lights up
and the track is played back.
13.2.3The Control Zones on CD
The control CD consists of the following three tracks, each with different playback functions.
CD Track #1: Lead In – (0:04 min)
Skipping to CD Track #1 will skip into the Lead In of the loaded track. If you turned on the
respective option in the Preferences, you can use this to skip back to the beginning of a
track when playing in the Relative Tracking Mode – the tracking mode jumps to Absolute
Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 105
CD Track #2: Playback Zone – (27:30)
This track is used for regular playback.
CD Track #3: Scroll Zone – (2:30)
Skipping to CD track #3 allows you to scroll up and down through your playlist by manually spinning the jog wheel of your CD player.
Whenever you stop the movement of the jog wheel, the respective track gets loaded. To
play the selected track, simply skip back to CD track # 1.
13.3The Calibration
%
If your track exceeds the 27:30
minutes Playback Zone it will
continue playing back normally in the
Scroll Zone – you have to skip manually to track #3 again to switch to Scroll
Mode. And even if your track exceeds
the whole 30 minutes, it will continue
playing in Internal Mode!
Calibration is required for the following reasons:
► Detection of the type of media (vinyl or CD), as well as the side of the played vinyl.
► Detection of the input level of the control signal.
► Detection of the connection and the quality of the signal and if it is sufficient for
tracking.
► Correction of reversed channels.
The decoder outputs a series of messages, qualifying the result of the calibration process:
► Vinyl 10/15 Min: Detected side of the Timecode record.
► CD: Timecode CD detected.
► Left/Right Ch. Missing: One of the channels is missing. TRAKTOR SCRATCH PRO only
works in emergency mode; only forward playback is possible.
► Waiting: TRAKTOR SCRATCH PRO is waiting for an incoming signal for calibration.
► Calibrating: TRAKTOR SCRATCH PRO is decoding the incoming signal.
► Calib. Failed: the calibration was not successful.
► Skipping: the Timecode vinyl or the Timecode CD skips.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 106
► Browsing: you are in the scroll zone.
You can re-trigger the Calibration every time by clicking on the ON button in the calibration picture.
13.4Playback Tracking Modes
13.4.1Internal Mode
Internal Playback means that you control playback via the Play button and the software
pitch fader, regardless of your external turntables or CD players.
13.4.2Absolute Mode
Absolute Playback Tracking mode is activated by pressing the button with the representation of a record and a tonearm. This absolutely links the position of the tonearm on the
record to the playback position of your track. Each action on the tonearm has direct effect
on playback of the track in TRAKTOR SCRATCH PRO, be it moving of the record back and
forth or placing the needle on another part of the record (Needle Drop).
13.4.3Relative Mode
While in Absolute Tracking Mode, press the Loop button on the right of the Absolute
Tracking button. You will notice the following:
1.
Playback of the track starts looping the current part of the song
2.
Playback mode has switched to the button showing only a record. This mode is called
Relative Tracking Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 107
While the software starts to repeat the same part of the song, the needle on the record
moves forward creating a growing offset to the software. The software therefore ignores
the position of the needle and only tracks the rotational speed of the record.
13.5Further Information
For more information about the AUDIO 8 DJ please refer to the AUDIO 8 DJ manual.
If you have problems setting up TRAKTOR SCRATCH PRO please read chapter 17.3
(TRAKTOR SCRATCH PRO Troubleshooting).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 108
14.Preferences
Traktor provides various options to customize its setup. The following chapter describes
all options in order of appearance.
14.1Audio Setup
14.1.1Audio Setup
Audio Device
Please choose your audio device. If no external audio interface is currently selected, you
can always select the built-in sound card as audio device.
Sample Rate
Choose a sample rate according to the sound card. Note that higher sample rates stress
your computer more. The standard is 44,100 kHz.
Audio Latency
Choose an audio latency which is suitable for your system. Lower values stress your computer more and a setting too low can lead to audio dropouts and other unwanted behavior.
14.1.2 Output Routing
Mixing Mode
Choose Internal Mixing Mode if you want to use TRAKTORs Internal Mixer.
Internal Mixing Mode provides the following options:
!
In Internal Mixing Mode the
Monitor Channel is also the
channel providing the signal from the
Preview Player in the Browser.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 109
► Output Monitor: Choose an output pair to prelisten to your tracks.
► Output Master: Choose an output pair for the master output.
► Output Record: Choose an output pair for the recording output. The Recording outputs
are used to send the master output signal from TRAKTOR to a separate mixer input
or recording device for recording your mix.
Choose External Mixing Mode if you want to use an external hardware mixer.
External Mixing Mode provides the following options:
► Output Channel A/B/C/D: Choose an output pair for each Deck. The settings you have
to do here depend on your audio device.
► Output Preview: Choose an output pair for the Preview Player
► Output Send: Choose an output pair for using send effects.
Click on Mono to merge the channels to mono mode.
14.1.3 Input Routing
Input Channel A - D
Use this menu to configure TRAKTOR to use the various inputs of your sound card for
playing from an external device. The Volume Meters to the right of the input selections
will display signal level if signal is present.
Input Send
Choose here an input pair for using send effects.
Swap Input Channel
Click on the respective buttons to swap the channels A and B or C and D.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 110
14.2MIDI Setup
After you have installed the drivers for your MIDI device, the interface will appear within
this section. TRAKTOR supports usage of multiple MIDI devices.
14.2.1MIDI Input Devices
Activate a MIDI Input Device by double-clicking on the respective line.
!
If your MIDI device does not appear in the list, you may need
to restart TRAKTOR in order for it to be
recognized. When doing so, make sure
your MIDI device is attached to your
computer and powered on.
14.2.2MIDI Output Devices
To use TRAKTORs MIDI-Out feature, e.g. to light the LEDs on your MIDI controller, activate
the matching MIDI Output Device by double-clicking on the respective line. In most cases
a controller will show up with the same name in both the Input and the Output Devices
list.
14.2.3MIDI Clock Settings
Send MIDI Clock
If this option is checked, TRAKTOR will send a MIDI Clock signal to the selected device.
MIDI Clock Send Offset
Here you can setup an offset time for the MIDI Clock signal.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 111
14.3Timecode Setup
Timecode Inputs
The Control Signal figures give you a basic idea of the quality of the Control Signal.
Decoder Gain
Here, the volume of the incoming Timecode signal is shown. A higher gain normally means
better tracking.
!
Scratch options are only working if you own a TRAKTOR
SCRATCH PRO license. The required
hardware has to be installed.
Assign to Decks
With this buttons you can assign the Timecode signals to TRAKTORs channels. You can
assign one signal to several Decks for controlling more than one Deck with only one CDplayer or turntable.
Tracking
Track Start Position: You can choose the start position of the tracking here. This is useful
if you want to sticker your record with a lead-in sticker or the beginning of your control
record is worn out or scratched.
Turntable Speed: Put a checkmark in the 45 RPM handling mode if you prefer this over
33 RPM.
Tracking Alert: If the Timecode signal becomes bad, the tracking buttons start flashing red.
Load next track when flipping record: With this option checked, you can load the next
track of any Playlist by flipping the record.
Use Playlist Scrolling Zone: With this option, you can enable Playlist Scrolling. Read more
about Playlist Scrolling in chapter 13.1.3 (The Control Zones on Vinyl) and 13.2.3 (The
Control Zones on CD).
Switch to Absolute Mode in lead-in: When you place the needle in the Lead-In of the
Control Vinyl or skip to the first track of the Control CD, the tracking mode switches to
Absolute Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 112
Switch to Absolute Mode when loading: When loading a track, the tracking mode always
switches to Absolute Mode.
14.4Loading
Loading
► Loading only into stopped Deck: Secures you from accidentally loading a track into a
deck that is playing in the main mix.
► Stop playback at end of track: Stops the playback of a deck when a track is at its
end.
► Load next at end of track: This enables TRAKTOR to automatically load the next track
from the Preparation Playlist.
► Initially cue to Load Marker: With this enabled, a track will automati&shy;cally cue to an
established Load Marker when it is loaded.
► Activate Fade In &amp; Out Markers: This option allows the use of Fade In and Fade Out
markers for automatic crossfading between tracks.
► Autoplay loops Playlist: This option affects the Cruise Mode (Autoplay). With this option checked, TRAKTOR will repeat the Playlist from the beginning, when the end of
the list is reached.►
Resetting Controls
► Reset all deck controls when loading track: Resets all deck controls to their default
value when a track is loaded.
► Reset all mixer controls when loading track: Resets all mixer controls to their default
value when a track is loaded.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 113
Deck Cache Size
You will notice the blinking, yellow bars beneath and below the Stripe. Everything you see
in this range will be cached, allowing seamless loops and jumping through the track. The
yellow bars stop blinking when the whole track is cached.
Choose how many megabytes per track and deck shall be cached, but choose carefully:
Choosing 256 MB for Deck A &amp; B means that with tracks loaded in both decks your computer needs 512 MB of your RAM only for handling the two decks.
The display below shows how much RAM is left with your current adjust&shy;ment.
14.5Transport
Pitch
► Pitch Fader Range: Determines the range of tempo control in the Decks.
► Fine Pitch Range: Determines the range of an additional pitch controller avail&shy;able only
via MIDI. This second pitch controller can be used in combination with the Deck pitch
control. By setting the range to +/- 8% or less you can control the speed of a deck
very precisely with MIDI fader increments.
Key Lock Quality
This adjusts the quality of time stretching used when using the Key Lock function.
► Use ECO with a slower processor.
► Use HiQ with a fast processor.
Loops
► Auto-Detect Size: Use this slider to adjust the size beneath which a track is automatically detected as loop and therefore will be looped automatically. An automatically detected loop will show the green loop bars at the beginning and the end.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 114
Beat Counter
► Beats per Phrase:
Define here how many beats a phrase (bar) shall contain.
14.6Mixer
EQ Selection
► EQ Type: Choose between the classical 3-band-EQ (Classic) or an emulated mixer EQ
from Pioneer DJM-600 (P600), Ecler Nuo4 (NUO4) or Allen &amp; Heath XONE:92
(Xone:92).
Filter Selection
► Ladder: Uses the ladder filter also used in the Filter effect for the channel filter
knobs.
► Xone: Uses the emulation of the Xone:92 filers also used in the Filter:92 effect for the
channel filter knobs.
Crossfader
► Auto Crossfade Time: This slider adjusts the amount of time it will take for the auto
crossfade feature to crossfade between tracks.
► Smooth/ Sharp: Adjust here the crossfader curve.
Level
► Set Autogain when loading track: With this option checked, TRAKTOR adjusts the gain
for you.
► Enable Master Limiter: Enabling this option prevents from clipping.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 115
14.7Effects
Effect Slot Routing
TRAKTOR PRO can route all effects as insert or send effects.
► Insert: In Insert mode the effect is inserted into the signal chain right before the channel filter. The balance of the original signal (Dry) and effect signal (Wet) is controlled
by the Dry/Wet-Knob in the effect panel.
► Send: In Send mode the effect unit becomes independent from TRAKTORs internal
signal flow. The effect unit receives input externally from one of the inputs of the audio interface as selected in Preferences &gt; Audio Setup &gt; Input Routing. The effect
sends its output to one of the Outputs of the audio interface, as selected in Preferences
&gt; Audio Setup &gt; Output Routing. FX Panel Mode
FX1/FX2: choose between Advanced and Chained Effects.
► The Advanced Mode provides a more detailed control over one selected effect.
► The Chained Mode gives you control for up to three selected effects in one Panel.
Effect pre-selection
TRAKTOR provides a vast amount of effects. You can create a personal selection of all
available effects to narrow down the effects appearing in the Effect Selector of the effect
units.
By default, all available effects are pre-selected. To remove an effect from the pre-selection, select it and press the REMOVE button, or double click it.
To add an available effect to the pre-selection, select it and press the ADD button or
double clickt it.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 116
The order in which the effects appear in the drop down selection of the effect units can be
customized by moving the pre-selected effects up and down within the list of pre-selected
effects with the Up and Down buttons.
14.8Recording
Source
► Source: Choose internal to record TRAKTORs Master Output and choose exter&shy;nal to
record an external audio source like a turntable or a microphone.
► External Input: Select the input channel of TRAKTOR receiving the external audio.
File
► Directory: This determines the file path in which your audio recordings are stored.
► Prefix: This determines the prefix of the filename of each recording.
► Split File at Size: With a file size selected, your audio recordings will be split each time
the file size is reached. 14.9Broadcasting
Proxy Settings
If connecting to the Internet through a Proxy, use this section to configure TRAKTOR to
use your Proxy settings.
Server Settings
Use this menu to configure TRAKTOR to use your Shoutcast/Icecast server.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 117
Metadata Settings
Use this menu to configure metadata for your broadcasting stream.
14.10 File Management
14.10.1 File Management
File Management
► Import Music-Folders at Startup: With this selected, each time TRAKTOR is started,
it will automatically import all tracks in your Music Folder that have not already been
imported.
► Determine track-time automatically (before analysis): With this option checked
TRAKTOR estimates the track-time before exactly analyzing it.
► Background Analysis on Collection Load/Import: Performs an automatic analysis of all
tracks of the Collection not yet analyzed when im&shy;ported.
► Background Analysis when Loading into Deck: This option trig&shy;gers the analysis only
when loading a track into a Deck. By analyzing the tracks on demand you don’t run
into the CPU problems you may encounter with a permanent background analysis.
► Show Consistency Check Report on Startup: With this selected, the Consistency Check
%
Analysis is a process generating
high CPU load. Due to lower
prioritization of the analysis process there
is no risk of slowdowns for TRAKTOR itself, but when using additional software
contemporarily to TRAKTOR, you may
note that this software performs slower
than usual.
Report will be displayed each time you start TRAKTOR. This report displays information about your Track Collection and gives options to manage it.
File Structure Mode
The File Structure Mode determines in which way a Playlist will be exported.
Analyze BPM Range
► Min/Max: Dial in the minimum and maximum values of beats per minute (BPM) your
tracks usually have to help TRAKTORs BPM-analysis finding the appropriate value
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 118
when analyzing. It is advisable to keep the range small and to avoid the doubling of a
value (e.g. 80 - 159 BPM is better than 80 – 161 BPM). The lowest possible value
you can enter is 40 BPM, whereas the highest possible value is 250 BPM.
► Place AutoGrid-Marker: With this option checked, TRAKTOR places automatically a
Beatmarker.
Editing
Allow Inline Editing in List Window: If checked, you can edit metadata of you music files
by double-clicking them in the Browser List.
With this option unchecked, Inline Editing of a tracks’ tag in the Browser is not allowed
to prevent from unwanted chang&shy;es during a live set. Check this option if you’re preparing
tracks at home for faster access to the tags.
14.10.2 Data Location
Directories
► Root Dir: This is the path to your Collection/Playlists/Settings/History/Mappings files.
You can change the folder. To change it, click the …! Button and show TRAKTOR the
path to your preferred folder. Click on Default Dir to reset the paths to the defaults.
► iTunes Music Library: If you want to use TRAKTORs iTunes integration you have to tell
it where your iTunes Library file is stored. Click the …! button and show TRAKTOR
the path to your iTunes Library file.
Music Folders
If you want to use your own music folder structure you can add your music folders in this
list. TRAKTOR can automatically import all music files stored within this Music Molders.
► Add… !: lets you add folders as Music Folders.
► Delete!: deletes the selected Music Folder from the list.
► Change… !: if you changed the direction or the name of a Music folder click an this
button to tell TRAKTOR about this changes.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 119
14.11 Layout Manager
14.11.1Layout Manager
Layout Manager
► Change Name: Here you can type in a name for the selected Layout. Click Rename to
verify your entry.
► Personal Layouts: In this list all stored Layouts are shown. To activate a Layout, dou-
ble-click the entire row. The active layout is marked with Active in the first column.
The order in this list also defines the order of layouts in the L ayout Selector of
TRAKTOR PROs Header. Add adds a new layout to the Layout Manager. Remove deletes
the selected layout. Move Up/Down changes the position of the selected layout in the
order of layouts.
► Show Global Section: switches the whole Global Section on and off.
► Left/Right: choose the default Panels shown on the left and right of the Global
Section.
► EQ + Fader + Cue: Show or hide the respective features.
► Filter + Key + Gain + Balance: Show or hide the respective features.
► Crossfader: Show or hide the crossfader.
14.11.2 Deck Details
Deck Style
► Deck Size A &amp; B (C &amp; D): switch between full and minimized Decks. Minimized Decks
do not show Waveform and Advanced Controls.
► Scratch Panels: switches the Scratch Panels on and off for use with TRAKTOR
SCRATCH PRO.
!
Scratch Panels are only working if TRAKTOR SCRATCH
PRO and the required hardware are installed.
► Adv. Controls: switches advanced controls for full Decks on and off.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 120
► A &amp; B (C &amp; D): Choose the default displayed Advanced Control Panel.
► Show Deck C&amp;D: switches Decks C and D on and of. If unchecked Decks C&amp;D are
hided and muted.
Deck Header
► Show Cover Art: switches the Cover Art Icon on and of.
► File Info: here you can choose which information for a loaded track shall be shown in
the Deck Header. There are nine fields in three rows available. The top row is displayed
bigger and the bottom row smaller. So you can sort the information by importance.
Pitch Controls
► Phase Meter: switches the Phase Meter for all Decks on and off.
► Pitch Fader: switches the Pitch Fader for all Decks on and off.
14.11.3 Browser Details
► Show Preview Player: switches the Preview Player on and off.
► Show Track Info: switches the Info Window on and off.
► Show Playlist Favorites: switches the Browser Favorites on top of the Browser on and off.
► Show Cover Art: switches the cover art window on and off.
► Show Status Bar/Error Messages: switches the status bar on and off. There are also
shown error messages inside of it.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 121
14.12 Global View Options
Decks
► Highlight Beatmarkers: With this selected, the Beatgrid will be brighter and more visible.
► Show Minute-Markers: Shows a white line for each minute on the Stripe View.
► Channels: This configures how the waveform looks. Beats will display the beats of the
track only. Beats and Highs will display the beats of the track along with the detected
highs in the track. Beats and Envelope will display the beats of the track along with
the detected envelopes in the track.
► Track End Warning: This slider adjusts the amount of warning time TRAKTOR gives
when the end of a track is approaching. A red flashing Stripe View shows it.
► PlayMarker Position: Determine how far to the left or to the right the Play-Marker shall
be displayed.
► Stripe View Fit: This applies to TRAKTOR SCRATCH PRO - choose between two display
options.
► Display Deck Focus: When this option is checked TRAKTOR will highlight the focused
Deck.
Miscellaneous
► Switch to Fullscreen on Startup: With this selected, TRAKTOR will open in full screen
mode (filling your entire computer screen) each time it is started.
► Fullscreen Resolution: Determines the zoom factor of the full screen view of TRAKTOR.
If set to Desktop, TRAKTOR uses the native resolution of your computer 1:1. When
choosing another option, the full screen view appears larger (zoomed in) because
TRAKTOR assumes a lower screen resolution. The available options depend on your
hardware.
► Show value when over control: With this option checked, knobs like Gain, Master
Volume or the Effects’ knobs show their actual value when hovering over it.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 122
► Font: Here you can choose the font TRAKTOR shall use in the Browser.
► Font Size: With this option you can change the font size used in the TRAKTOR
Browser.
► List Row Height: Choose how big your Browser List rows shall be.
► Reset Hidden Dialogs: The Reset button will reset all dialogs that have been hidden
by clicking on the “Don’t Show This Again” checkbox.
14.13 Keyboard Mapping
This menu is used to load and to configure your keyboard to assign it to the control features of TRAKTOR. Add a control, click Learn and press a key on your keyboard to assign
it to the control feature.
See, how the available controller attributes change depending on the desired control and
how different settings change the behavior of the controls.
You can Add controls and assign them to a specific deck or to the focus deck.
Import and Export settings and share them with other users.
Read more about Keyboard Mapping in chapter 15.1.1 (Keyboard Mapping).
14.14 MIDI Mapping
This menu is used to configure the various keys of your MIDI Controller to assign it to the
control features of TRAKTOR. Add a control, click Learn and press a key on your keyboard
to assign it to the control feature.
See, how the available controller attributes change depending on the desired control and
how different settings change the behavior of the controls.
You can Add controls and assign them to a specific deck or to the focus deck.
Import and Export settings and share them with other users.
Read more about MIDI Mapping in chapter 15.1.2 (MIDI Mapping).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 123
15.Advanced Knowledge
Find in this chapter further information and deeper knowledge about certain features.
15.1Hotkey and MIDI Mapping
Traktor stores the mapping of Hotkeys for keyboard control and the setup for MIDI
controllers in “.tsi”-files.
TRAKTOR is installed with mappings for the most important controllers on the market and
some default settings for controlling Traktor with your computer keyboard.
This chapter gives an introduction to creating a custom mapping either from scratch or by
modifying an existing mapping.
► How to load one of the enclosed settings files read in chapter 12 (Control via Keyboard
&amp; MIDI Hotkeys).
► For building your own settings you have to open the Preferences by clicking the dedicated Header Icon or by using the Application Menu.
15.1.1Keyboard Mapping
With the Keyboard Mapping you can setup Hotkeys to control Traktor the way you
want.
► Open Preferences &gt; Keyboard Mapping.
To assign a key of your keyboard to a function in TRAKTOR you have to:
► Click on Add.
► Select the function you want to assign.
► Click on Learn.
► Press the respective key on the keyboard.
► To verify if the assignment was successful, Learn Mode has to be turned off.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 124
For an explanation of the available options see the MIDI Mapping chapter hereafter.
But note that not all options available for MIDI Mapping are also available for Keyboard
Mapping.
15.1.2 MIDI Mapping
The MIDI Mapping features of TRAKTOR are very powerful. Due to the many available
options, MIDI mappings can get quite complex to handle, so try to keep your mappings
simple at first.
► First of all make sure your controller is connected and activated in Preferences &gt; MIDI
Setup.
%
To test if your controller is connected simply press a button
or move a knob or fader on your controller and verify that the MIDI Indicator in
Traktors Header lights up while doing
so.
► Open Preferences &gt; MIDI Mapping.
Creating a MIDI Mapping - Overview
To assign a control of your MIDI controller to a function in TRAKTOR you have to:
► Click on Add.
► Select the function you want to assign.
► Click on Learn.
► Press the respective Button on your MIDI controller.
► To verify if the assignment was successful, Learn Mode has to be turned off.
Usually at this point further options have to be set in order to achieve the desired behaviour,
such as Toggle versus Hold Mode or adjusting the sensitivity of a knob. The changes can
be observed instantly in the software without the need to close the MIDI Mapping page.
A few visual helpers are provided, such as sorting by columns and highlighting of entries
assigned to the same button, knob or fader.
The final part of this chapter provides a few step-by-step examples of how to map specific
functions to your MIDI controller.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 125
Understanding the available Options
This section describes the function of each control in the MIDI Mapping page.
Assignment Table
► The Assignment Table shows the entire set of MIDI associations contained in the “.
tsi”-file.
► The table can be sorted by each column, e.g. by name, by modifier or by hardware
button, knob or fader.
Reset
► Un-map the selected entry from its current assignment.
Reset All
► Resets the entire mapping to start from scratch.
Add
► This menu contains all available MIDI functions that can be mapped to the hardware.
► To create a new assignment, select the function to be mapped from this menu.
Duplicate
► Duplicate the selected entry. Use this function for multiple assignments and when
working with Modifiers or same controls on different Decks.
Delete
► Delete the selected entry. The entry above the deleted entry is selected as next. When
deleting more than one entry in a row, it works bottom-up.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 126
Delete All
► Delete the entire Assignment Table for restarting from scratch.
Learn
► Activates Learn Mode, where incoming MIDI events are assigned to the currently selected entry.
Assigned Controller (unlabelled)
► Shows the value of the last incoming MIDI event.
MIDI CH
► Shows the MIDI channel of the last incoming MIDI event.
Lock Omni
► When active, TRAKTOR ignores the MIDI channel specified in the assignment.
Comment
► This allows you to enter a comment for each assigned control. Comments should be
used for documentation purposes in complex mappings and are also useful for grouping functions, by using the alphabetic sorting of the Comment column.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 127
Interaction Mode
► Determines what kind of interaction the hardware controller should have with the controlled parameter in TRAKTOR.
the function is turned on as long as the button is held. Examples are Pitch Bend
► Hold: ���������������������������������������������������������������������������������
and Shift buttons. Hold Mode can only be associated to buttons!
Each time the button is pressed, the function changes state. Toggle Mode can
► Toggle: �����������������������������������������������������������������������������
only be associated to buttons.
��������������������������������������������������������������������������������
Mode is required to control functions without duration, such as setting
► Trigger: Trigger
a Cue Point or switching to another Layout. Even though this is very common, functions that require to be controlled in Trigger Mode are rare, because many of these
options have been grouped in so called “Ranges”. Ranges are lists of alternative options that are controlled in Direct Mode described hereafter. Trigger Mode can only be
associated to buttons.
Direct Mode directly controls the value of the parameter or range of values,
► Direct: �����������������������������������������������������������������������������
such as controlling the pitch with a fader or scrolling through a list with a rotary knob.
Direct Mode is also required for using a button to select a specific value from a list,
such as selecting an effect. Direct Mode can be used with all available types of hardware controls. Each type of control has an individual subset of options described
further below.
“Next” describes incrementally stepping through a range by increasing the
► Next (Inc): ��������������������������������������������������������������������������
value. The step size is either fixed or can be adjusted in the Resolution field.
“Previous” describes incrementally stepping through a range by de► Previous (Dec): ������������������������������������������������������������������
creasing the value. The step size is either fixed or can be adjusted in the Resolution
field.
“Reset” describes to reset the range to its default value. One frequently used
► Reset: �������������������������������������������������������������������������������
example is to skip to the beginning of a track by mapping the Reset Mode of the function “Deck Seek Position” to a button.
���������������������������������������������������������������������������
describes the mode to be used to turn on and off MIDI driven LEDs
► Output: “Output”
on the controller.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 128
A���������
ssignment
► Determines on which deck the action of a function shall take place.
► Global: Certain functions
����������������������������������������������������������������
are not deck-related, here the only available mode is
GLOBAL.
► Focus / Deck A / Deck B / Deck C / Deck D: ����������������������������������������
If functions are deck related, they can
either be assigned to the Focus Deck or they can be permanently assigned to one of
the Decks.
► FX 1 / FX 2
When assigning effect controls, the available Assignment option are “FX 1” and “FX 2”,
referring to the two available Effects Units.
Type of Controllers
► Button:��������������������������������������������������������������������������
MIDI buttons usually send a “Note On” event when pushed and a “Note Off”
event when released. The value of the Note differentiates the MIDI signals coming
from different buttons.
► Fader/Potentiometer: Fader
�������������������������������������������������������������
and Potentiometers have in common that they have a lim-
ited range and an absolute position within the range. The advantage of using absolute
controllers is that they give visual feedback about their state and therefore you do not
have to look at the computer to check the crossfader, the EQ or the pitch fader. One
problem of absolute controls is that the software may change the value of the controlled function. This generates an offset between the value of the function in the software
and the position of the fader or knob. As soon as you slightly tweak the value of the
fader or knob, the controlled functions skips to match the values, what can be unexpected and not wanted. Using the “Soft Takeover” option described further below can
solve this problem.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 129
► Rotary Encoder: �������������������������������������������������������������������
Endless rotary encoders or touch pads do not have an absolute position. If the controller does not have LED rings or displays, the status of the functions
controlled via endless encoders can only be checked by looking at the computer. The
big advantage of this type of control is that the value can also be controlled by the
software, because changes are only made incrementally. For example the value of an
effect parameter controlled via encoder can be set on a certain value by recalling the
preset and can be directly tweaked from there with the encoder. This does not work
when using a fader or a potentiometer.
► Rotary Encoder (inv): ����������������������������������������������������������������
There are two different types of endless rotary encoders on the
market. If the controlled function reacts backwards and too roughly when using the
first type of Rotary Encoder choose Rotary Encoder (inv) instead.
► Rotary AutoReset/Rotary AutoReset (inv): These
���������������������������������������
two modes behave like the Rotary
Encoder Modes but add a neutral/reset MIDI command, once the rotation has stopped.
For example when controlling the Pitch Bend function via Rotary Encoder, the last
Pitch Bend buttons will remain lit. When using Rotary AutoReset the Pitch Bend buttons will be reset to OFF.
Modifier
This section���������������������������������������������������������������������������������
����������������������������������������������������������������������������������������
provides two pairs of conditions for executing the selected function. Modifiers
can be used in the same manner as SHIFT-buttons on your computer keyboard.
When these boxes remain empty, the currently selected MIDI command is always executed.
When the Modifier boxes contain data (i.e. Modifier: M1, Value: 1) the currently selected
MIDI command is only executed when Modifier 1 has been set to Value 1.
The ADD menu provides 8 individual Modifiers, that can each be assigned to a MIDI button and can each have 8 different states numbered (0, 1,…, 7)
0 is the neutral state of each Modifier.
► The condition is expressed by a modifier and its value. Only if the condition is true,
the function is executed.
► The values/state of Modifiers can be changed via MIDI like the other TRAKTOR functions.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 130
Button Options (Type = Button)
��������������������������������������������������������������������
using Direct Mode with buttons on two-state functions, such as
► Set to value: When
Play/Pause, it allows to turn the function ON or OFF regardless the current state,
something that Toggle Mode cannot do. When using Direct Mode with buttons on
ranges of values, the available values are displayed and one of them must be selected
or entered into the editable field.
Fader / Potentiometer Options (Type = Fader)
This function is to be used whenever the functions controlled by the
► Soft Takeover: ���������������������������������������������������������������������
hardware can change their value without touching the hardware, such as the pitch
fader that skips when pressing Sync. When Soft Takeover is enabled the action of the
associated fader or knob will be ignored until it is brought to the position matching
the position in the software. This allows taking over control with absolute controllers
seamlessly.
Allows inverting the action of a button, a fader or knob.
► Invert: ���������������������������������������������������������
Encoder Options (Type = Rotary)
����������������������������������������������������������������
the ratio of transmission between hardware and software
► Rotary Sensitivity: Adjusts
parameter. Usually 50% is a good value to start with. For achieving finer resolution go
down to 1%. For scrolling through lists, use 100%.
�����������������������������������������������������������������
the influence of higher rotational speeds on the soft► Rotary Acceleration: Determines
ware parameter. For linear behaviour of the controller (i.e. amount of change independent from speed of movement) set the Acceleration to 0%.
► At higher values of the Acceleration, larger changes of the controller can be achieved
by turning the knob faster.
Allows inverting the action of a button, a fader or knob.
► Invert: ���������������������������������������������������������
LED Options (Control Type = Output)
Most commonly a single LED is turned on by a software parameter.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 131
LEDs are identified by responding to a specific MIDI controller (CC#). Usually sending the
controller with the value “0” turns the LED off while sending the controller with the value
“127” turns the LED on.
Some LEDs can light up in different intensities or colours depending on the value sent
with the MIDI controller.
Sometimes controllers have arrays of LEDs identified with a single MIDI controller. Such
arrays light up progressively according to the value sent with the controller.
���������������������������������������������������������������������
default it shows the entire range the selected function has inter► Controller Range: By
nally in TRAKTOR. This range of the software function is mapped onto the LED or
LED range on the controller. Continuous ranges usually have a range form 0 to 1 where
0 represents the lowest and 1 the highest value. Lists of values usually have ranges
such as 0, 1, 2, 3,… - each of the numbers representing one of the possible states.
The range can be reduced to a sub range in order to select specific values or for zooming into a continuous range.
Also the MIDI range of the LED can be customized. For example a col► MIDI Range: ��������������������������������������������������������������������
oured LED may require the value “64” to light up in green. In this case the MIDI Range
must be limited to “0 – 64”.
Allows inverting the on/off states of the LED.
► Invert: ����������������������������������������������
������������������������������������������������������������������������
for continuously mapping ranges onto another (i.e when mapping the
► Blend: Used
position of a fader onto a LED chain).
► When mapping two-state Status LEDs (ON/OFF) always turn the Blend option off.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 132
15.1.3 Tips
Make a good Plan
MIDI mappings easily get bigger than you have planned, because you may want to add
some extra bells and whistles here and there. Reviewing and editing such a mapping file
get difficult the more rows you have created in your assignment table.
It is therefore very advisable not to create a MIDI mapping by trial and error, but to make
a good plan of the mapping before even starting to map the first button. Only when you
are sure that the mapping will not change, you should start implementing it.
Specify all Modifiers
When using Modifiers, a method to keep an overview of your mapping is to make a list of
all Modifiers involved in the mapping, by which buttons these modifiers are switched to
which state and which functions are dependent on a Modifier. You will not regret to have
created this document, once you are in the middle of debugging the mapping that you
have created.
Implementation
Do the implementation very systematically.
► First of all implement all Modifiers involved in your mapping. This has the advantage
that all functions relying on Modifiers instantly work as you program them.
► Use the Duplicate functions whenever you can. It is much less work to perfectly con-
figure you Jog Wheel for Deck A, including all sensitivity settings, testing it and finally duplicating it to deck B, rather then creating it two times from scratch.
► Proceed in functional groups. For example implement all looping related functions at
once, ideally add a comment to all these functions that allows you to identify them as
being related to looping later on. Finally test this group an save the settings file. This
way you create intermediate stages of your mapping file that are completely functional for a certain number of functional groups.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 133
Simple SHIFT function
The following example mapping assigns the PLAY function to a button, when pressed alone
and the SYNC function to the same button, when pressed in combination with another
button.
► Add &gt; Deck &gt; Transport &gt; Deck Play/Pause
► Modifier M1: Val = 0
► Interaction Mode: Toggle
► LEARN to PLAY Button on controller
► Add &gt; Deck &gt; Tempo &gt; Deck Sync Tempo/ Phase
► Modifier M1: Val = 1
► Interaction &gt; Toggle
► LEARN to the same PLAY Button on controller
► Add &gt; Modifier &gt; Modifier #1
► Interaction &gt; Hold / Value = 1
► LEARN to SHIFT Button on controller
Jog Wheels
Jog Wheels does not equal Jog Wheel and the market offers a large variety of different
kinds of such wheels.
► Most Jog Wheels send events on a MIDI CC channel when turning the wheel.
► For the mappings of Jog Wheels use DIRECT Interaction Mode and ROTARY as Type
of Controller.
► Some Jog Wheel have a touch sensitive zone that can be used to assign different
functions to turning the wheel on the outer rim, or turning by touching the centre zone.
Most of these touch sensitive Jog Wheel send events on a different MIDI CC depending on whether the centre zone is touched or not. In this manner you directly assign
different functions to the two modes of the Jog Wheel.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 134
► Additionally touch sensitive Jog Wheels send a Note ON event when touching the wheel
(without turning it). This event is most commonly a Note ON event and is usually assigned to the function: Deck &gt; Transport &gt; Deck Scratch ON, to simulate placing a
finger on the record for taking over manual control.
► The MIDI CC sent by the Jog Wheel when turning it while touching the centre has to
be assigned to Deck &gt; Transport &gt; Deck Scratch for obtaining a natural feeling scratch
control.
► A few Jog Wheels send a MIDI Note ON event when turned left and another MIDI Note
ON event when turned right. These Jog Wheel are not really usable for scratching but
can still serve for Pitch Bending or for Seeking through the track.
► Depending on the specific function assigned to the Note ON event, it may be necessary to reset the function at the end of the motion. This functionality is provided by
the JOG Controller Type, that RESETS the controlled function, once the motion of the
Jog Wheel has stopped.
► A further variable between different kinds of Jog Wheels is amount of data they send
during one revolution. This results in different sensitivities and can be controlled with
the SENSITIVITY and ACCELERATION sliders in the Rotary Encoder Settings
As you can see, the variety of MIDI implementations for Jog Wheels is pretty diverse and
for configuring your Jog Wheel to your needs you may either invest some time or explore
the DOWNLOADS section on the TRAKTOR website for mapping files for your specific
controller.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 135
Disabling a Jog Wheel
The following example realizes a jog wheel with an alternative disabled state by using a
modifier toggling each time when pressed between the values of 0 and 1. The jog wheel
is disabled, when the modifier is 0.
► Add &gt; Deck &gt; Transport &gt; Deck CD-DJ Jog
► Modifier M1: Val = 1
► Interaction Mode: Direct
► Type of Controller: Rotary
► LEARN to jog wheel on controller
► Add &gt; Modifier &gt; Modifier #1
► Interaction &gt; Toggle
► LEARN to ENABLE Button on controller
(in case you have backlit buttons on your controller)
► Add &gt; Modifier &gt; Modifier #1
► Interaction &gt; Output
► Assign MIDI CC of LED button via drop down menu next to LEARN button
Looping Section
This example explains how to map three MIDI buttons to control the LOOPS of TRAKTOR
with the following functionality:
► The button labelled “-“ initially sets a 4-beat loop and when pressed again halves the
size of the loop.
► The button labelled “+” also initially sets a 4-beat loop andwhen pressed again doubles the size of the loop.
► The button labelled “Exit” leaves the loop or activates loop mode for stored loops.
To achieve this we need to define one Modifier that is used to differentiate the functionality
of the buttons “+” and “-“ depending on whether a loop is currently playing or not.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 136
MODIFIER
► Add &gt; Modifier &gt; Modifier #1
► Interaction &gt; Direct / Value = 1
► LEARN to “-“ Button on controller
► Duplicate this line
► LEARN to “+“ Button on controller
► Duplicate this line
► Change to Value = 0
► LEARN to “EXIT“ Button on controller
LOOP ACTIVE
► Add &gt; Deck &gt; Cue/Loops &gt; Loop Active
► Interaction &gt; Toggle
► LEARN to “EXIT“ Button on controller
SETTING 4 BEAT LOOPS
► Add &gt; Deck &gt; Cue/Loops &gt; Loop Resize+Set
► Interaction &gt; Direct-Button / Value = 4
► Modifier M1: Val = 0
► LEARN to “-“ Button on controller
► Duplicate this line
► LEARN to “+“ Button on controller
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 137
CHANGING LOOP SIZE
► Add &gt; Deck &gt; Cue/Loops &gt; Loop Size
► Interaction &gt; Previous-Button
► Modifier M1: Val = 1
► LEARN to “-“ Button on controller
► Duplicate this line
► Change Interaction to &gt; Next-Button
► LEARN to “+“ Button on controller
Working with Hot Cue Buttons
This example shows a mapping of how to smartly set up the cueing and hot cue section
on a MIDI controller. The following example implements 4 hot cue buttons, one button
to store cue points or loops called STORE and a secondary function on that same button
when pressed together with a SHIFT button, to delete the selected cue point.
The buttons are used as follows:
► Pressing the Buttons 1-4 skips to HotCue 1-4
► Pressing STORE stores the Current Cue Point or Current Loop and maps it into the
next available free HotCue slot
► Holding STORE pressed and additionally pressing one of the 4 HotCue buttons and
maps the Cue Point or Loop directly into the additionally pressed HotCue button
► Pressing SHIFT+STORE, deletes the currently selected Cue Point or Loop
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 138
This is how to proceed:
HOT CUE BUTTONS
► Add &gt; Deck &gt; Cue/Loops &gt; Select HotCue
► Interaction &gt; Hold / Value = 1
► LEARN to “1“ Button on controller
► Duplicate this line
► Change to Value = 2
► LEARN to “2“ Button on controller
► Duplicate this line
► Change to Value = 3
► LEARN to “3“ Button on controller
► Duplicate this line
► Change to Value = 4
► LEARN to “4“ Button on controller
STORE / MAPPING BUTTON
► Add &gt; Deck &gt; Cue/Loops &gt; Store Cue/Loop
► Interaction &gt; Trigger
► Modifier M1: Val = 0
► LEARN to “STORE“ Button on controller
► Add &gt; Deck &gt; Cue/Loops &gt; Map HotCue
► Interaction &gt; Hold-Button
► Modifier M1: Val = 0
► LEARN to the same “STORE“ Button on controller
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 139
DELETE CUE POINTS
► Add &gt; Modifier &gt; Modifier #1
► Interaction &gt; Hold / Value = 1
► LEARN to SHIFT Button on controller
► Add &gt; Deck &gt; Cue/Loops &gt; Delete Cue/Loop
► Interaction &gt; Trigger
► Modifier M1: Val = 1
► LEARN to the same “STORE“ Button on controller►
15.2TRAKTOR Profiles
15.2.1The TRAKTOR Root folder
TRAKTOR stores all information required to create a personalized TRAKTOR Profile in one
folder, called the Root folder.
%
You can change the path in
Preferences &gt; File Management
&gt; Data Location.
The default path of the Root folder is:
► PC: My Documents\Native Instruments\Traktor
► Mac: ~/Native Instruments/Traktor
It contains the following file types
► *.nml = all playlists have this extension, the Collection, the History playlists and usercreated playlists
► *.tsi = extension for all settings (keyboard, MIDI, Preferences settings, Layouts)
► *.log = extension of the log-files that get created when opening TRAKTOR
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 140
You can make a copy of the Root folder for several purposes:
► For making a backup of this folder, backs up the entire profile including the collection,
your current Settings, MIDI mappings and Hotkeys.
► For playing on a host computer, by storing your entire workspace including the tracks
onto a portable hard drive. Pointing from a host computer to your personal Root fully
reproduces your workspace on the host computer.
► For transferring your workspace onto another computer also running TRAKTOR.
► For creating distinct User Profiles with separated Collections on the same computer.
TRAKTOR can be told to switch to another Root folder what results in switching the Profile
of TRAKTOR.
15.2.2The Recordings folder
Recordings
Besides the Root folder TRAKTOR creates a second folder containing the audio files recorded with TRAKTORs recording function in wav format. It is found by default in:
!
The location of the Recordings
folder cannot be changed.
► PC: My Music\Traktor\Recordings
► Mac: ~/Music/Traktor/Recordings
15.2.3Complete Backup
Besides the automatic backups of the collection, it makes sense to manually backup the
entire TRAKTOR Root folder from time to time.
► The Root folder is called TRAKTOR. The default path to the Root folder is mentioned
above in section 15.2.1 (The TRAKTOR Root folder).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 141
If you have moved the Root folder to another destination, you find the correct path to the
Root folder as follows:
► Open Preferences &gt; File Management &gt; Data Location.
► Click the “…!” Button next to the Root Dir field.
► The file browser will reveal to you the current position of the Root folder.
To make a complete backup of your personal TRAKTOR files, make a copy the entire
TRAKTOR Root folder and save it onto a separate hard drive.
Additionally make sure that you also made a backup of your RECORDINGS folder. The
default path to the RECORDINGS folder is mentioned above in section 15.2.2 (The
Recordings folder).
15.2.4Restoring TRAKTOR from a Backup
Method 1:
This method deletes the current settings and the Collection. Use this method after reinstalling TRAKTOR.
► Make sure that TRAKTOR is not running
► Overwrite the current Root folder with the content of the backed up Root folder. The
default path of the folder to replace is: PC: My Documents\Native Instruments\
Traktor
► Mac: ~/Native Instruments/Traktor
► Restart TRAKTOR.
%
You can change the path in
Preferences &gt; File Management
&gt; Data Location.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 142
Method 2:
This method preserves the current settings and the Collection. You can switch back at any
time to these settings by repeating this method.
► Copy the backup of the Root folder back to your DJing computer.
► Open Preferences &gt; File Management &gt; Data Location.
► Click the “…!” Button next to the Root Dir field.
► Point to the location of the backup folder that you created in step 1.
► Confirm and restart TRAKTOR.
15.2.5Creating a portable version of TRAKTOR
By storing all your tracks and the Root folder on a portable hard drive you can recreate
your personal profile on a host computer running TRAKTOR. Proceed as follows.
On computer 1:
► Make sure TRAKTOR is closed
► Move all required tracks onto the portable drive
► Copy the current Root folder onto the portable drive
► Start TRAKTOR.
► Open Preferences &gt; File Management &gt; Data Location.
► Click the “…!” Button next to the Root Dir field.
► Point to the copy of the Root folder that you have just created on the portable drive.
► Close and restart TRAKTOR to make sure that the switch worked.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 143
On computer 2
► Connect the portable drive
► Start the local TRAKTOR
► Open Preferences &gt; File Management &gt; Data Location.
► Click the “…!” Button next to the Root Dir field.
► Point to the Root folder on the portable drive.
► Restart TRAKTOR.
If the drive letter (Win) or the name of the drive and user directory (Mac) of your customized location didn’t change, you should find everything as it was before the re-install.
If the drive letter of your customized location did change, you will find all tracks with an
exclamation mark (!) that indicates that the links are broken. Use the Relocate function
to find these files again.
15.2.6Automatic Collection Backup (Security Backup)
Each time you change something in your Collection and close TRAKTOR, a backup of
your Collection is created in the folder “Backup” contained in your “Traktor” folder. If you
delete or partly ruin your Track Collection by mistake proceed as follows:
► Right/Ctrl click the Collection Tree Icon and choose Import Collection from the context
menu.
► In the folder “Backup”, select the backup version that you would like to restore.
► Confirm with OK.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 144
15.2.7Repairing a Corrupted Collection
A corrupted Collection may cause TRAKTOR to crash during start-up. If you can’t start
TRAKTOR proceed as follows:
► Rename the file collection.nml in the current TRAKTOR Root folder into collection_
original.nml.
!
severe types of file corruption cannot be cured with this
► Restart TRAKTOR – this will create a new Collection.
► Try to import the backup of the Collection as described above.
method.
15.3Synchronizing via MIDI Clock
Traktor allows you to synchronize external hard- and software. For this functionality it
uses MIDI Clock Signals and the Master Clock Panel in the Global Section.
15.3.1TRAKTOR as Tempo Source (MIDI Clock send)
To use Traktor as the tempo source it has to send the MIDI Clock Signal to the external
hard- or software.
► To send MIDI clock you have to select the MIDI Output Device in Preferences &gt; MIDI
Setup which should send out the MIDI Clock signal.
► On the same Preferences page, you have to activate the Send MIDI Clock option.
► In the Global Section, open the Master Clock Panel by clicking the Metronome.
► Choose Auto or Manual Mode.
► To start sending a MIDI Clock signal, click the Start/Stop button. Clicking it again stops
sending. When MIDI Clock is active, the Start/Stop Button is lit blue.
► The Tempo Display shows the tempo of the MIDI Clock signal in BPM.
► By clicking the Sync button TRAKTOR triggers a MIDI Clock Stop Message immediately
followed by a MIDI Clock Start Message to re-sync the external hard- or software.
%
For synchronizing external hardware with the MIDI Clock, the
Master Clock has to be set as Master
Tempo Source.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 145
► It may be required to adjust the offset between TRAKTOR and the receiving hard- or
software. To do so, use the slider labeled MIDI Clock Sending Offset found in
Preferences &gt; MIDI Setup.
15.3.2Syncing TRAKTOR to an external MIDI Clock Signal (External Sync)
► Traktor is able to receive MIDI Clock Signals from another computer running
TRAKTOR or other applications or from MIDI hardware sending MIDI Clock.
► To receive MIDI clock you have to select the MIDI input device in Preferences &gt; MIDI
Setup which receives the incoming MIDI Clock signal.
► In the Global Section open the Master Clock Panel by clicking the Metronome.
► Choose External Mode (Ext). In this mode the TRAKTOR Master Clock follows the
external MIDI Clock signal, once this one is started.
► To synchronize the clock to the phase of the application or hardware sending the MIDI
Clock signal, press the start button on the sending device.
► In case of an offset between the sending hard- or software and TRAKTOR, the offset
has to be adjusted in the sending device.
15.3.3Synching two versions of TRAKTOR
These are the steps to synchronize two versions of TRAKTOR running on different computers:
► Connect the two computers via MIDI in order to transmit the MIDI Clock signals
► Decide which of the two computers should be the Tempo Master and follow the instructions described in section 10.2 (Master Clock Panel).
► On the other computer follow the instructions described in section 10.2 (Master Clock
Panel).
► For synchronizing both computers, press the TICK button in the Master Clock Panel.
► Once the two ticks are audible, press the SYNC button on the sending computer in
order to reset the receiving computer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 146
► Now start tweaking the slider labeled MIDI Clock Sending Offset found in Preferences
&gt; MIDI Setup until the two Ticks are in perfect sync.
► You can then turn off the Ticks and are ready to go.
15.4Broadcasting
With Traktor you are able to broadcast your mix over the Internet. Basically everything
that is audible from the Master Out will be streamed to the Internet and listeners all over
the world are able to tune in and listen to your show in real time.
15.4.1Streaming Protocol
TRAKTOR uses a streaming protocol called Icecast. Essentially, the TRAKTOR software
contains an Icecast client, which can send data to an Icecast server.
To use this feature, you need access to a computer running such an Icecast server. It is
recommended that this computer has an Internet connection with at least 128 kb/s upstream transfer rate. The available bandwidth is being shared among the listeners, so it
should be as high as possible.
► How to set up an Icecast server read on the Icecast website in the “Docs” area:
www.icecast.org/docs.php
%
To learn more about this streaming protocol and how to setup a
server, please refer to the official Icecast
homepage (www.icecast.org).
!
Mac user: Icecast only works
o n Wind o w s and Linu x .
For Broadcasting with a Mac take
a look at the easy-to-use application Nicecast from rogue amoeba: rogueamoeba.com/nicecast/
15.4.2Configuring TRAKTOR
Before getting started, it is necessary to configure TRAKTOR that the local client can
connect to the server and the metadata of the radio stream contains the correct information:
► Open TRAKTOR Preferences &gt; Broadcasting.
► Adjust the Proxy Settings according to your current Internet configuration. If you are
not using a proxy, simply check Use direct connection.
► Next, input the address of the Icecast server you want to connect to. This can be
either a hostname or an IP-address.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 147
► Specify the port where the server can be reached. Most servers use the default setting
of 8000.
► Type in the mount path and password. This information can be obtained from the host
of the Icecast server and permits only authorized clients to stream data from there.
► Choose the streaming format. Keep in mind that with a higher bit rate, more bandwidth
is used for every single stream. Therefore, fewer listeners can tune in at the same
time.
► Finally, you can specify the client metadata settings. This information is sent to the
server and your listeners.
%
Be specific in your description;
the easier it is to identify the
musical content of your stream, the more
likely listeners will tune in!
15.4.3Starting the Broadcast
Once the necessary configurations have been done, you can start your live stream:
1.
Open the Audio Recorder Panel in the Global Section.
2.
Click the Broadcast On/Off Button.
► If the button is highlighted, you are connected to the server and can now start your
broadcast.
► If the symbol starts flashing, the connection with the Icecast server could not be established. Please go through the configuration process once more and make sure that
all data has been inputted correctly.
15.5Effects in Detail
15.5.1Intro
This chapter gives in depth information about the individual aspects of the effects provided
with TRAKTOR. For more information about the effects routing read chapter 10.3 (Effect
Panels).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 148
!
15.5.2Common Parameters
All effects have the following set of parameters in common:
D/W (Dry/Wet)
For all effects this parameter controls the balance between the original signal (Dry; full
left position) and the effect signal (Wet; full right position).
ON
For all effects this button turns on and off the effect. Some buffer based effects, such as
the Delay or the Reverb will continue outputting sound for a certain amount of time, even
after turning them off. To fully disable the action of an effect on a specific cannel use the
Effect Assign Buttons in the mixer strip of that channel.
Snapshot &amp; Reset
For all effects this button resets the effect parameters to their default value. The default
value can be stored by pressing the Snapshot Button (camera symbol) in the effect panel.
Each time when switching effects the new effect will be reset to default.
15.5.3Gater
A few effects integrate more
than simple Dry-Wet control
into the D/W knob. For these effects the
knob is called D/RNG (Dry-Range) and
its action is separately described in the
effects details.
!
Some effects use the On button for triggering the sampling
process required to fill the effect buffer.
These effects have to be started in off
state. Starting them in on state will result in no audio.
!
It is absolutely necessary for
matching the action of the
Gater with the beats in the music, that
your tracks have well aligned Beat Grids
and that the Master Clock follows the
track tempo in Auto Mode.
The Gater rhythmically mutes parts of the audio at adjustable rates. The Master Clock
controls the rate and the moment in time of muting. A hissing noise can be added to the
Gater for emphasizing the rhythmical pattern.
Advanced Mode
NOISE (Noise Level)
► Controls the amount of hissing noise added to the Gate: Min: No added hissing Max:
Much hissing added
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 149
SHAPE
► Controls the shape of the Gate. Min - Center: 1% Hold, 0% Decay - 50% Hold, 0%
Decay Center - Max: 50% Hold, 0% Decay - 0% Hold, 100% Decay
RATE
► Controls the rate of the Gater.
► The 5 available values are expressed in fractions of bars, and are equally distributed
over the range of the knob. Min - Max: Off - 1/4 - 1/8 - 1/16 - 1/32
!
Activating MTE in combination
with no added Noise Level results in no audio output.
MTE (Mute)
► Fully mutes the music and passes through only the added hissing noise.
STT (Stutter)
!
Activating STT disables the action of the Rate knob.
► Activates 3/16 gating time for producing a stuttering effect.
Chained Mode (1-Knob Control)
► The knob controls the rate of the Gater and behaves like the Rate knob in Advanced
Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 150
15.5.4Flanger
Classical industry standard Flanger with tempo based and free running rate control and
stereo de-phasing.
Advanced Mode
SPRD (Stereo Spread)
► Creates a spread stereo effect by controlling the phase offset between the oscillation
phase on the left and right stereo channel. Min:
phase offset (1/2 period) no phase offset Max: maximum
FEEDB (Feedback)
► Controls the strength of the Flangers’ feedback, making the effect stronger and more
colorful. Min: small feedback Max: strong feedback
%
RATE
► Controls the rate of Flanger oscillation.
► The 11 available values are expressed in fractions of bars, and are equally distributed
over the range of the knob. Min - Max: 16 bars, 8 bars, 4 bars, 2 bars, 4/4, 2/4, 3/8,
1/4, 3/16, 1/8, 1/16
UP
► When pressed, the direction of the oscillation is inverted, starts with the lowest fre-
The LFO RESET button in the
Master Panel resets the low frequency oscillation phase to zero (highest
point).
!
In Freerun mode (FR.R) the rate
of the Flanger oscillation is not
tied to the musical tempo and ranges
continuously from 30 sec (Min) to 1/30
sec (Max).
quency and moves upward.
FR.R
► Enables continuous rate control, independent from musical tempo and ranges from
30 sec (Min) to 1/30 sec (Max).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 151
LFO RESET (Master Panel)
► Resets the oscillation and restarts at the lowest or highest point, according to the
status of DN/UP.
Chained Mode (1-Knob Control)
► The knob controls the rate of the up and down oscillation of the flanging sound. The
knob behaves like the Rate knob in Advanced Mode with Freerun activated.
15.5.5Phaser
Classical industry standard Phaser with tempo based and free running rate control and
stereo de-phasing.
► The controls of the Phaser are identical in behavior to the ones of the Flanger described above.
15.5.6Filter LFO
Classical Filter, based on ladder filter architecture with tempo synched LFO. The LFO is
either driven by the Beat Grid and therefore is always in sync with the track or can be
driven in Freerun Mode.
Advanced Mode
D/RNG (Dry-Range)
► Controls the strength of the effect with a combination of Dry-Wet and the LFO-Range.
The filter is fully bypassed in full left position.
► As soon as the knob is not in full left position the filter fully kicks in and the knob
progressively increases the range of the LFO when turned clockwise.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 152
SHAPE
► Controls the shape of the LFO.
► To the full left position of the knob the shape is a triangle, morphing into a saw tooth
with sharp decay to the full right position of the knob.
RES
► Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance Max:high resonance
%
RATE
► Controls the rate of Filter oscillation.
► The 11 available values are expressed in fractions of bars, and are equally distributed
over the range of the knob. Min - Max: 16 bars, 8 bars, 4 bars, 2 bars, 4/4, 2/4,
3/8, 1/4, 3/16, 1/8, 1/16
Chained Mode (1-Knob Control)
► The knob behaves like the Rate knob in Freerun Mode of the Advanced Mode.
The LFO RESET button in the
Master Panel resets the low frequency oscillation phase to zero (highest
point).
!
In Freerun Mode (FR.R) the rate
of the Flanger oscillation is not
tied to the musical tempo and ranges
continuously from 30 sec (Min) to 1/30
sec (Max).
15.5.7Filter:92 LFO
This filter is modeled after Allen &amp; Heaths Xone:92 mixer with tempo synced LFO. The
LFO is either driven by the Beatgrid and therefore is always in sync with the track or can
be driven in Freerun mode.
► The controls of the Filter:92 LFO are identical in behavior to the ones of the Filter
described above.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 153
15.5.8Filter
Classical industry standard filters with 2-knob and single knob control modes, based on
ladder filter architecture.
Advanced Mode
HP (High Pass)
► Controls the low cutoff frequency.
► Passes the entire band in full left position.
► Progressively cuts frequencies from low to high, when turned to the right.
RES
► Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance Max:high resonance
LP (Low Pass)
%
In DJ Mode (DJM) the LP knob
is labeled LP/HP and has a
combined function to control both lowcut
and highcut frequencies.
► Controls the high cutoff frequency.
► Passes the entire band in full right position.
► Progressively cuts frequencies from high to low, when turned to the left.
BRJ (Band Reject)
► Switches the filter to Band Reject Mode. In this mode the frequencies between the
two cutoff frequencies are eliminated rather than passed through.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 154
DJM (DJ Mode)
► Switches the panel to 1-knob filter control. The LP knob becomes a bipolar control
for controlling both the lower and higher cutoff frequency.
► Passes the entire band in center position.
► Progressively cuts frequencies from high to low, when turned from center to the left.
► Progressively cuts frequencies from low to high, when turned from center to the
right.
Chained Mode (1-Knob Control)
► The knob controls the effect in DJ Mode and behaves like the LP/HP knob in Advanced
Mode.
15.5.9Filter:92
This Filter is modeled after the filters on Allen &amp; Heaths Xone:92 mixer.
► The controls of the Filter:92 are identical in behavior to the ones of the Filter described
above.
15.5.10 Flanger Flux
Manually controlled Flanger suited for jog wheel control.
Advanced Mode
FEEDB (Feedback)
► Controls the strength of the flangers’ feedback, making the effect stronger and more
colorful. Min: small feedback Max: strong feedback
PITCH
► Controls the pitch of the effect. The center position of the knob is neutral – to both
sides the flanging effect moves from high to low frequencies.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 155
FB- (Inverted Feedback)
► Only passes uneven harmonics, making the flanging effect sound deeper in frequency.
SPR (Stereo Spread)
► Creates an offset between the flanging effect on the right and left stereo channel,
giving to the effect spatial depth.
Chained Mode (1-Knob Control)
► The knob controls the pitch of the effect. The center position of the knob is neutral
– to both sides the flanging effect moves from high to low frequencies.
15.5.11 Phaser Flux
Manually controlled Flanger suited for jog wheel control.
The controls of the Phaser Flux are identical in behavior to the ones of the Flanger Flux
described above, except the 8 Pole switch:
8PL (8 Pole)
► Switches between 6 Pole and 8 Pole filters, making the effect more intense.
15.5.12 Flanger Pulse
Innovative, semi-automatic Flanger effect that is triggered by signal peaks in the music,
producing interesting lashing sounds.
Has the most effect on music with some room such as drum loops because the self-oscillation can develop best in empty parts of the music.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 156
Advanced Mode
SHAPE
► Controls the shape of the Flanger Pulse. The range of the controller bears a multitude
of patterns and morphs between them for continuously new sound effects.
► Explore the range of this knob in combination with the FEEDB and the AMNT knob
and store the preset whenever you like it.
FEEDB (Feedback)
► Controls the strength of the flangers’ feedback, making the effect stronger and more
colorful: Min: small feedback; Max: strong feedback
AMNT (Amount)
► The knob has two operating zones on the left and the right side of the center position
and controls the amount of the modulation of the Flanger frequency.
FB- (Inverted Feedback)
► Only passes uneven harmonics, making the flanging effect sound deeper in frequency.
SPRD (Stereo Spread)
► Creates an offset between the flanging effect on the right and left stereo channel,
giving to the effect spatial depth.
Chained Mode (1-Knob Control)
► The knob has two operating zones on the left and the right side of the center position.
It behaves like the AMNT knob in Advanced Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 157
15.5.13 Phaser Pulse
Innovative, auto-controlled Phaser effect that is triggered by signal peaks in the music,
producing interesting lashing sounds.
IT has the most effect on music with some room such as drum loops because the selfoscillation can develop best in empty parts of the music.
The controls of the Phaser Pulse are identical in behavior to the ones of the Phaser Pulse
described above, except the 8 Pole switch:
8PL (8 Pole)
► Switches between 6 Pole and 8 Pole filters, making the effect more intense.
15.5.14 Filter Pulse
Innovative, auto-controlled Filter effects, based on ladder filter architecture, and triggered
by signal peaks in the music, producing interesting lashing sounds.
It has the most effect on music with some room such as drum loops because the selfoscillation can develop best in empty parts of the music.
Advanced Mode
D/W (Dry/Wet)
► The D/W control is more than a simple mix control. It also controls the cutoff frequency where the action of the automatic filter control takes place.
► Use D/W in combination with the ENV knob to explore the dimensions of this effect.
SOFTEN
► Controls the smoothness of the cutoff envelope. The more the knob is turned to the
right, the softer the filter sweeps will be.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 158
RES
► Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance; Max: high resonance
ENV
► Controls the frequency where the filter action takes place. Compared to a regular filter,
the filter frequency is modulated by the peaks in the music resulting in a dynamic
pattern of filter sweeps.
► In center position the modulation is neutral, to the right the modulation goes upwards
and to the left the modulation goes downwards.
► The effect of the ENV knob is in strong dependency to the position of the D/W
knob.
Chained Mode (1-Knob Control)
► The knob behaves like the AMNT knob in Advanced Mode.
15.5.15 Filter:92 Pulse
Innovative, auto-controlled Filter effects, modeled after the filters on Allen &amp; Heaths
Xone:92 mixer, and triggered by signal peaks in the music, producing interesting lashing
sounds.
It has the most effect on music with some room such as drum loops because the selfoscillation can develop best in empty parts of the music.
► The controls of the Filter:92 Pulse are identical in behavior to the ones of the Filter
described above.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 159
15.5.16 Delay
Classical industry tempo synced Delay with Freeze Button. The rate of the Delay is directly
controlled by the Master Clock of Traktor to ensure that the Delay keeps up with the
beat also during tempo changes.
Advanced Mode
FILTER
► Internal carbonized high pass filter and low pass filter (similar to a bandpass filter).
The filter is open when the knob is in full left position and progressively cuts out low
and high frequencies when turned to the right.
FEEDB (Feedback)
► Controls the strength of the delays feedback, making the effect stronger and more
colorful. Min: small feedback Max: strong feedback
RATE
► Controls the Delay time.
► The 7 available values are expressed in fractions of bars, and are equally distributed
over the range of the knob. Min - Max: 1/32, 1/16, 1/8, 3/16, 1/4, 3/8, 4/4.
FRZ (Freeze)
► Freezes the Delay by closing the input and turning up the Feedback to maximum
value.
► The filter remains active in the feedback loop. For endless freezes, the FILTER knob
has to be therefore turned down to full left position.
%
The effect rate can be switched
during operation without any
crackles or glitches in audio!
%
Even in Freeze mode the Delay
follows the Master Clock and
will therefore seamlessly merge into the
mix once it is released.
!
The Rate knob continues to work
in Freeze mode and allows making interesting mash-ups. It is important
though, to turn the knob down to low
values only shortly because otherwise
the buffer looses its full content.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 160
SPREAD
► Creates an offset between the delay times on the left and right channel, giving to the
effect spatial depth.
► The Delay times are: L Min - Max: 1/32, 1/16, 1/8, 3/16, 2/4, 3/8, 4/4 R Min - Max:
1/32, 1/8, 3/16, 3/8, 3/8, 2/4, 4/4
Chained Mode (1-Knob Control)
The knob works like the Rate knob in Advanced Mode at a medium Feedback value.
15.5.17 Reverb
Classical industry standard Reverb with extreme room sizes, individual low and high pass
filter controls and Freeze function.
Advanced Mode
LP
► Low Pass filter in the effect loop – fully open when turned to the left.
HP
► High Pass filter in the effect loop – fully open when turned to the right.
SIZE
► Controls the size of the reverberation added, ranging from small to huge room sizes.
FRZ (Freeze)
► Freezes the Reverb by closing the input and leaving the output open.
Chained Mode (1-Knob Control)
► Works like the SIZE knob of the Advanced Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 161
15.5.18 Iceverb
The Iceverb is an innovative Reverb with self-oscillating filters for interesting colorful effects. The Filter of the Iceverb is outside the feedback loop, what makes decay independent
from the filter settings.
Advanced Mode
COLOR
► Controls the cutoff frequency of the filter and therefore the color of the Reverb.
ICING
► Controls the resonance of the filter and therefore the intensity of the color.
SIZE
► Control the size of the reverberation added, ranging from small to huge room sizes.
FRZ (Freeze)
► Freezes the Reverb by closing the input and leaving open the output.
► The SIZE control remains active in Freeze Mode allowing interesting pitch effects.
Chained Mode (1-Knob Control)
► Works like the SIZE knob in Advanced Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 162
15.5.19 Transpose Stretch
The Transpose Stretch is a classical Pitch-Shifter with additional Grain-Size control and
Time-Stretcher.
Advanced Mode
STRCH (Time Stretch)
► As soon as moved away from full left position, the input is recorded for 1 bar (2 if the
button “Tx2” is pressed) and then endlessly looped and played back.
► Also the time is stretched, the more the button is moved to the right until it comes to
a full stop of time playing only one “Grain”
!
The STRCH knob has to be in
full left position to open the
input of the effect. The effect must be
loaded with the STRCH knob in full left
position!
GRNSZ (Grain Size)
► This knob only works with the underneath GRN button enabled and controls the size
of the grains. Otherwise the grain size is automatically linked internally for best overall pitching.
► It ranges from large grains (333 ms) in full left position to short grains (5 ms) in full
right position.
► Especially small sizes can lead to nice FM/ring modulating, metallic sounds. Try also
with “full stop” and transpose to max for metallic “moaning” sounds.
KEY
► Controls the pitch of the grains.
► Center position is neutral and plays the grains at original pitch.
► To the right, the grains are pitched up to +1 octave in full right position.
► To the left, the grains are pitched down to -5 octaves.
GRN
► Enables Grain Size Control
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 163
ST.2
► Play 2 bars instead of 1 bar when in STRCH mode.
Chained Mode (1-Knob Control)
► Works like the KEY knob in Advanced Mode.
15.5.20 Reverse Grain
Buffer based effect for capturing a loop form the current audio material and successively
playing it back backwards with different mash up options.
!
The effect has to be started in
off mode and then turned on to
sample the current audio.
Advanced Mode
ON
► Samples audio and plays the buffer back backwards.
PITCH
► Controls the pitch of the sampled audio.
► Normal pitch in full right position. Progressively decreases pitch when turned to the
left.
► The grained sample, ranging from 0 to 100.
GRNSZ
► Controls the size of the audio grains. Creates interesting effects when used in combination with the Speed Knob.
SPEED
► Controls playback speed of the samples’ audio grains.
► Plays at normal speed in full right position.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 164
► Progressively reduces playback speed when turned to the left.
INV
► Play the grains in reversed order.
FWD (Forward)
► Inverts playback direction from backward playback to forward playback.
Chained Mode (1-Knob Control)
► Behaves like the GRNSZ knob in Advanced Effect Mode.
15.5.21 Ring Modulator
The Ring modulator is an effect that modulates the tracks by multiplying a high frequency
signal onto the audio material.
Advanced Mode
AM-RM
► Morphs the type of modulation from amplitude modulation in full left position to ring
modulation in full right position.
► Amplitude modulation sounds softer compared to ring modulation.
RAW
► Controls the shape of the modulation oscillator.
► The oscillator is a sine wave in full left position for smooth sounds and a filtered square
wave in full right position for harsher sounds. PITCH
► Controls the frequency of the modulating oscillator from low in full left position to high
in full right position (100 Hz - 8371 Hz).
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 165
Chained Mode (1-Knob Control)
► This knob behaves with a combination of RAW and PITCH controls which can be found
in the Advanced Effect Mode.
15.5.22 Digital LoFi
Digital LoFi decomposes the music by reducing its bit depth and the sample rate.
Advanced Mode
BIT (Bit Depth)
► Controls the bit rate ranging from full bit range in full left position to just above one
bit in full right position.
!
SMTH (Sample Rate Smooth)
This knob only has an effect in
combination with the sample
rate reduction.
► Smoothes the effect by introducing a lag into the sample rate reduction.
SMP.RT (Sample Rate)
► Controls the Sample Rate reduction raging from no reduction in full left position to
100 Hz sample rate in full right position.
SPREAD
► Creates an offset between the sample reproduced on the right and left stereo channel,
giving to the effect spatial depth.
Chained Mode (1-Knob Control)
► Works like a combination of the SMP.RT and the BIT knob in Advanced Mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 166
15.5.23 Mulholland Drive
The Mulholland Drive is a highly sensitive overdrive effect with two independent overdrive
units and unpredictable self-oscillating behavior.
With activated feedback it has most effect on music with some room such as drum loops
because the self-oscillation can develop best in empty parts of the music.
Without activated feedback it behaves like a regular drive effect.
Advanced Mode
TONE
► Controls the frequency of the feedback tone.
► Requires a certain amount of feedback to have effect.
► Creates a great variety of tones when used in combination with the FEEDB knob.
FEEDB (Feedback)
► Controls the amount of feedback in the effect.
► With zero feedback in full left position, the effect behaves like a regular tube distortion.
► This is the control for increasing or decreasing the amount of Feedback in the effect,
ranging from 0 to 100%.
%
At high DRIVE and FEEDB
values the effect can produce
sound even without any input.
DRIVE (Overdrive)
► Controls which of the two overdrive units is fed and how much.
► Drives only one unit in full left and full right position and morphs between them when
turning from full left to full right position.
FB- (Inverted Feedback)
► Only passes uneven harmonics, making the effect sound deeper in frequency.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 167
Chained Mode (1-Knob Control)
► This knob behaves like the DRIVE knob in Advanced Effect Mode.
15.5.24 Beatmasher
The Beatmasher is a buffer based effect that captures a short loop from the current audio
material and mashes it up.
!
The effect has to be started in
off mode and then turned on to
sample the current audio.
Advanced Mode
ON
► When turning the effect on, it samples one bar or audio based on the tempo of the
master clock.
► To sample a new piece of audio, turn the effect off and then back on.
GATE
This is a combined controller for different ways of mixing and gating the sampled material:
► In full left position it bypasses the effect.
► From full left to the center it mixes in progressively bigger chunks of the buffered
audio.
► In center position it plays the buffered audio.
► From center to full right position cuts out progressively bigger chunks of audio like a
Gater.
ROT (Rotate)
► Shifts the sampled audio relatively to its original position in steps of 1/8 notes.
LEN (Length)
► Controls the length of the audio played back from the buffer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 168
FST (Fast)
► Enables a second range of values for the Length controller for producing much shorter loops.
REV (Reverse)
► Reverses the playback direction of the buffered audio samples.
Chained Mode (1-Knob Control)
► This knob behaves like the Length knob in Advanced Mode.
15.5.25 Turntable FX
This effect emulates sounds produced by spinning back or slowing down a record playing
on a turntable.
!
The effect has to be started in
off mode and then turned on to
sample the current audio.
Advanced Mode
BRK (Turntable Brake)
► Triggers the turntable brake effect produced when turning off the motor of the turntable.
► The speed of the braking sound is controlled by the B.SPD knob.
► The speed down time and the speed up time can be individually controlled by changing the position of the SPEED knob while BRK is on.
AMNT
► Controls the amount of the rocking motion triggered with the RCK button.
R.SPD
► Controls the speed of the rocking motion triggered with the RCK button.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 169
B.SPD
► Controls the speed of the brake motion triggered with the BRK button.
RCK
► Triggers the rocking motion of the turntable.
REW
► Triggers a rewind effect.
► The acceleration of the rewind effect is controlled by with the B.SPD knob.
Chained Mode (1-Knob Control)
► The ON button behaves like the BRK button and the knob like the B.SPD knob in
Advanced Effect Mode.
15.6Upgrading from TRAKTOR 3 &amp; TRAKTOR SCRATCH
Please read this chapter thoroughly to prevent you from possible data losses. However, It is
highly recommended to backup your Traktor folder before upgrading to a newer version.
15.6.1Running TRAKTOR PRO/TRAKTOR SCRATCH PRO side by side with older versions
TRAKTOR PRO/TRAKTOR SCRATCH PRO uses a new folder for storing its Collection and
settings. It is therefore possible to run TRAKTOR PRO/TRAKTOR SCRATCH PRO side by
side with TRAKTOR 3/TRAKTOR SCRATCH on separate Collections and separate settings
files.
It is not possible to share the same Collection, Playlists or settings between TRAKTOR
PRO/Traktor Scratch Pro and older versions of TRAKTOR/Traktor Scratch.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 170
15.6.2Importing your Collection
For importing your old Collection file, use the Import Collection option in the context
menu of the Collection Tree Icon. The process is automatic and does not require further
interaction.
!
We recommend writing tags for
all your tracks in Traktor 3
before importing them into Traktor
Pro or Traktor Scratch Pro.
15.6.3Importing your Playlists
For importing your old playlists, use the Import Playlists option in the context menu of the
Playlists Tree Icon. Point to the top-level folder containing the playlists you want to import.
The process can be repeated for playlists located in different folders.
15.6.4Importing your MIDI and Keyboard Mappings
It is not possible to import MIDI and keyboard mappings from former versions into
TRAKTOR PRO or TRAKTOR SCRATCH PRO. This is due to a total restructuring of the
internal architecture in this domain to allow an extending of the functionality to the needs
of the growing number of hardware controllers on the market.
► The installation of TRAKTOR comes with a large number of MIDI and keyboard mapping files that cover most of the controllers available on the market.
► More settings files are available for download on the TRAKTOR website via the
Download option in the Help tab of the Application Menu.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 171
16.What’s new in TRAKTOR PRO and TRAKTOR
SCRATCH PRO
This chapter addresses users of Traktor 3 and Traktor Scratch. It describes the
changes when upgrading to Traktor Pro or Traktor Scratch Pro, the reasons and
the benefits.
%
For convenience in this chapter
Traktor Pro and Traktor
Scratch Pro are summarized under
the common name Traktor.
16.1User Interface
The probably most visible change is the new user interface of TRAKTOR.
16.1.1Global Section and Advanced Panels
In TRAKTOR 3 specialized panels in the Details Section have controlled the advanced
functions. The available panels were freely arranged on 4 pages. Colored frames associated deck related panels to their decks.
In the new TRAKTOR each function receives a fixed position in the interface. Related
functions have been grouped and mutually integrated for reducing complexity.
Advanced deck functions are shown in the Advanced Panels underneath each Deck. Global,
non-deck related functions are shown in the Global Section above the decks and underneath the Header. The new TRAKTOR interface does not have deck focus based control
panels on the GUI but the concept of focus based control still remains valid in the MIDI
and hotkey domain.
Global Section
The Global Section hosts the following panels:
► Master Volume: groups functionality of former Details Panels Master and Mode.
► Master Clock: offers functionality of former Details Panel Clock.
► Audio Recorder: offers functionality of former Details Panel Audio Recorder.
%
Effect Units are global entities, but are activated individually per deck in the mixer strip of each
channel.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 172
► Effect Unit 1 &amp; 2: offer functionality of former Details Panels Channel Effect and
Master Effect.
Advanced Section
The Advanced Section underneath each Deck hosts the following panels:
► Move Panel: groups functionality of former Details Panels Beat Jump, Loop Start, Loop
End and Loop Move.
► Cue Panel: groups functionality of former Details Panels Cue Edit, Cue List, Loop Set
and Loop Slct.
► Grid Panel: offers functionality of former Details Panel BPM.
Other Former Details Panels
► Page: two tabs on each side of the Global Section allow showing and hiding either one
of 2 available control panels.
► Decks: The new TRAKTOR does not use color based deck focus, the Crossfader assignment is done directly in the Crossfader Section.
► Channel: the functions “Punch” and “Talk” have been discontinued. Autogain is centrally controlled in a Preferences option, External Input is activated via a button menu
underneath the Deck letter.
► File Info: has been discontinued, as all track information is displayed in the larger deck
headers
► Native Mix Recorder: this recording format has been discontinued in the new TRAKTOR.
More details in the chapter 16.9 (Dropped TRAKTOR 3 Features).
► Key: the key is controlled directly from the mixer strip.
► Tracking: tracking panels are displayed in the waveform.
► Booth: the booth output and volume control have been discontinued.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 173
16.1.2 Layout Manager
TRAKTOR PROs Layouts are centrally managed in the Layout Preferences pages. There you
can configure the currently displayed layout and place it into an ordered list. New layouts
can be created from a set of pre-defined templates or as copies from existing layouts.
Layouts can be recalled via MIDI or hotkeys mappings.
16.2Cover Art
16.2.1Import of Standard Tags
TRAKTOR PRO has cover art support. Pictures contained in standard metadata tags of all
supported file types can be displayed in three positions of the interface: below the browser
tree, as list column and in the deck headings.
Cover Art can be added in JPG format to all file types supported by TRAKTOR PRO and
also directly saves them into all these file types.
16.2.2JPG Import
The artwork imported via JPG import is resized to 200x200 pixels in order guarantee
short loading times. In order to not overwrite the sometimes much larger artwork created
by other applications, TRAKTOR PROs cover artwork is only visible in TRAKTOR PRO and
not written back into the standard metadata tags of the tracks.
16.2.3Crate Flick
TRAKTOR PROs unique Crate-Flick feature contemporarily shows all covers from a record
crate as a long list. The cover artwork is cached to ensure gapless browsing by cover art
in large playlists.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 174
16.3Effects
TRAKTOR PRO has many exciting new effects. The power of the effect section has been
massively increased and simplified at the same time. This required some changes described hereafter.
16.3.1Effects Architecture
The Global Section has 2 independent Effect Units that can each host up 3 chained effects. The Effect Units are individually activated in the mixer strip of each deck, but share
the same settings for all decks. Effect input and output can individually be inserted into
the decks or assigned to soundcard terminals (Send Mode).
16.3.2Additional Filter per Channel
TRAKTOR PRO offers an individual filter per mixer channel. Using this filter does not require to sacrifice an effect Unit like it was in TRAKTOR 3.
16.3.3Advanced &amp; Chained Control Mode
The Effect Units can either be used in Advanced or in Chained Control mode.
Advanced Control Mode
The Advanced Control Panel gives access to all available parameters of the effect. After
tweaking the effect, the settings can be saved as new default.
In Advanced Control Mode you get more out of a single effect than in Chained Control
Mode.
Chained Control Mode
The Chained Control Mode gives access to up to 3 chained effects per Unit. The controls
are reduced to one button and one knob per effect plus a global On and D/W control.
In Chained Control Mode you can assemble interesting effect layering.
%
When enabling both Effect Units
on a channel both Units are
chained. If each Unit is used in Chained
Mode up to 6 effects plus the channel
filter can be chained per channel!
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 175
Send Mode
Independently each Effect Unit can be used in Insert or in Send Mode.
While in Insert Mode the effect is inserted into the signal chain of each Traktor deck,
in Send Mode the Unit is directly fed by an input of the Audio Interface and outputs its
sound directly to an output of the Audio Interface.
This allows fully controlling the Effect Unit with the FX Send and FX Return controls of
the external DJ Mixer and still having the Effects totally synced to the tracks playing in
Traktor.
16.3.4Effect Pre-selection
The Effects Preferences page allows selecting and putting into order the effects to be used
in the performance. The pre-selected effects can directly be activated via MIDI buttons
or hotkeys. After installation, all effects are available in the list. Once you have found your
preferred effects, unused effects can be removed from the list of preselected effects.
16.3.5New Effects
TRAKTOR PRO has many new performance oriented effects described in detail in section
15.5.
16.3.6Pulse - Modulation
► TRAKTOR PRO offers an innovative modulation type for the Filters, the Flanger and
the Phaser called “Pulse”. In this mode the modulation is controlled by the peaks in
the audio material itself, producing interesting latching sounds.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 176
16.3.7In Comparison to TRAKTOR 3
Successors of TRAKTOR 3 Effects
The effects of TRAKTOR 3 have been adapted to the new framework and overworked to
improve sound and usability
► Flanger &gt;
Flanger, Flanger Flux &amp; Flanger Pulse
► Reverb &gt;
Reverb &amp; Iceverb
► Delay
&gt; Delay
► Beatmasher &gt;
Beatmasher
► XONE:92 Filters &gt;
Filter:92, Filter:92 LFO &amp; Filter:92 Pulse
► T2 Filters &gt;
Filter, Filter LFO &amp; Filter Pulse
What is possible in TRAKTOR PRO that could not be done in TRAKTOR 3
► Up to 3 effects can be chained per Unit.
► Additional low- and high-pass filters in each mixer strip can be used on top of effects.
► Current effect settings can be save as new default.
► Effect pre-selection allows to order used and to hide unused effects.
► Activating both Units on the same deck runs the signal through both Effect Units.
What is done differently in TRAKTOR PRO
► For 2 individual deck effects, activate Unit 1 for deck A and Unit 2 for deck B.
► For a master effect, activate the Unit on both decks.
What can’t be done in TRAKTOR PRO that used to be possible in TRAKTOR 3.
► 3 or 4 decks – 3 or 4 independent (non-filter)* deck effects.
► 2 decks – 2 independent (non-filter)* deck effects + 1 independent master effect.
*) filters are provided individually on each channel
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 177
16.4Browser
16.4.1Current Playlist
The fixed Current Playlist of TRAKTOR 3 has been replaced by a more flexible concept
allowing any playlist to be used as Current Playlist. This change has a few consequences
described hereafter.
Recently played tracks
As soon as you load a track into a deck it shows up in the History playlist – The History
has a few more columns than normal playlists that give information when and how the
tracks have been played:
► Start Time: shows when the track has been played.
► Duration: shows how long the track has been played.
► Deck: shows on which the track has been played.
After installation the History is assigned to the second of the Favorite Playlists.
Queuing up songs
In TRAKTOR 3 the Current Playlist could be used to queue tracks for being played later.
To do so in TRAKTOR PRO you can use any playlist. By default one of the Favorites is
named Preparation and serves to this purpose. If you find a track that you want to play
later, drag it onto the playlist called Preparation.
Autoplay
Autoplay is now called “Cruise” and will work from any playlist. The next track to be loaded
is taken from the same playlist as the last loaded track.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 178
16.4.2Collection, Tags and Playlists
All tags entered in TRAKTOR PRO including cover art, stripes, BPM, Cue Points and Loops
are instantly written into all supported file types including WAV and AIFF. The collection
of TRAKTOR PRO therefore only duplicates the information contained in the tracks for
faster searches, but when lost the information can always be recreated from the tags in
the tracks.
The main function of the Collection is to contain all your playlists. In TRAKTOR PRO playlists are no longer saved as individual files. This has the following advantages:
► All playlists always display the most recent tags.
► Playlist can created and moved within a virtual folder structure.
► Relocating tracks updates all copies in all playlists.
► Removing tracks from the Collection removes them from all playlists as well.
The down side of this concept is that playlists are not by default saved as individual files.
While all metadata is safely stored within the tracks and can be restored when corrupting or deleting the collection.nml, the playlists are only stored in the collection.nml and
therefore lost when corrupting or deleting the collection.nml.
It is therefore very important to make backups of your collection.nml time in addition to
the automatically generated backups!!!
16.4.3Playlist Management
Creation and Organization
In TRAKTOR PRO playlists can be managed more intuitively than before. Dragging a selection of tracks from the list window onto the playlist icon will create a new playlist. A folder
structure can be created within the playlist node and organized by drag &amp; drop.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 179
Navigation and Sorting
The workflow has been improved by recalling the selected tracks, the sorting order and
the scrolling position individually for each Playlist.
The way of sorting a Playlist has been overworked and the concept of Locked Playlist been
abandoned. A Playlist in TRAKTOR PRO has an intrinsic order that is not lost when sorting
the playlist by any of the column Headlines. The original order can always be restored by
clicking on the “#”column.
There are only two ways of permanently changing the order of a playlist in TRAKTOR PRO:
► Pressing the “Consolidate” button, what will make the currently visible order permanent
► Manually rearranging the songs in the playlist by drag &amp; drop. This operation is only
allowed when the playlist is first brought into its original order by either clicking on
the #-header or by consolidating it.
This behavior is how iTunes handles Playlists order with the very powerful addition of the
Consolidate button, not available in iTunes.
Incremental Search
The TRAKTOR Search has changed from being a function that creates a special new playlist called Search Results to being a Filter that filters the tracks in the Collection.
Furthermore the filter is applied after each typed character so that the results of a search
appear progressively as you type.
The search string is stored for each playlist individually. A playlist filtered by string “xyz”
will remain filtered in that way until the search string is explicitly deleted.
The Delete Button next to the search string allows removing the current filter at once.
16.4.4Saving and Loading TRAKTOR Settings
TRAKTOR PRO offers a powerful extension of the Traktor Settings file. The new Settings
files now also include the former .tks files containing Hotkey and MIDI mappings. This
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 180
extended functionality is expressed by the new file extension .tsi what stands for “Traktor
Settings Information”.
*.tsi files can now be imported and exported directly from the Preferences. Import and
export offer filter functions to selectively transfer only certain parts of the settings. This
allows using the settings file to store a complete profile containing preferred layouts, defaults and controller assignments. The available filter options are:
► Hotkey Settings
► MIDI Mapping
► GUI Layout
► File Load- and Write Paths
► Broadcasting
► Audio. MIDI Devices and OSC Settings
► Effect Settings
► All Other Preferences Settings
16.4.5Changed Name and Path of Root Directory
To Make TRAKOR Pro fully functional with a Settings file stored on a portable HD a few
changes in the default location of the root folder have been necessary.
By default all files used by TRAKTOR PRO now are stored in a new location:
► user\My Documents\Native Instruments\Traktor (PC)
► ~/Native Instruments/Traktor (MAC)
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 181
The root folder contains the following files:
► collection.nml
► Traktor Settings.tsi
► Traktor.log
And the following folders:
► Backups
► Coverart
► History
► Stripes
► Transients
The only folder stored somewhere else is the Recordings folder. It is found in:
► \My Music\Traktor
► ~/Musik/Traktor
The path to the root folder can be customized in the Preferences for storing all Traktor
relevant data on a portable drive. Currently TRAKTOR PRO requires a restart after changing the path of the root directory.
16.5Transport
16.5.1Looping
The Looping function has been totally overworked to improve its workflow. Manual and
automatic looping has been separated and is now controlled by dedicated buttons.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 182
Manual Looping
Manual looping is done by two dedicated buttons called In and Out.
Automatic Looping
Automatic looping is done with the new Loop Size Control offering several loop sizes at
once. Loops can be instantly set by clicking on one of the numbered buttons, changed in
size by clicking on another button and released by clicking on the same button again.
Advanced Loop Editing
Besides this basic length editing the advanced Move panel offers all remaining functions
for editing loop position and size. The available modes are:
► Beat Jump
► Loop Move
► Loop-In Move
► Loop-Out Move
16.5.2Cue Point and Loop Management
TRAKTOR PRO changes the way of working with stored Cue Points and Loops.
Loop and Cue Point Unification
In TRAKTOR PRO Cue Points and Loops are managed in the same list. Cue Points are
treated as Loops with zero length. This allows managing Cue Points and Loops in the same
list with the same controls. The panel dedicated to these functions is the advanced Cue
panel.
TRAKTOR PRO simplifies the way of managing Loops by always skipping to a Loop or Cue
Point when selecting it. By this you will always edit the current loop and no alternative
representation is needed to differentiate a selected from the current loop.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 183
Storing Cue Points and Loops
TRAKTOR PRO can store up to 32 Cue Points or Loops per track. They are managed in the
advanced Cue panel. The list of 32 cue points and loops can be navigated in chronological
order with the previous and next buttons next to the text display.
The current Cue Point is stored by pressing the Store button in the Cue panel. After storing
the Cue Point, its position, name and type is shown and can be edited there.
To delete a Cue Point, press the Delete Button after selecting it with the back and forward
buttons.
To store a Loop, press Store while the Loop is active. A Loop is deleted from the list by
skipping to it and pressing the Delete Button.
Hot Cue Buttons
TRAKTOR PRO has 8 Hot Cue buttons numbered from 1 to 8. These Panels unlikely to
the hot cues of TRAKTOR 3 are not bound to the position of the cue point in the track.
A Cue Point assigned to Hot Cue 1 will always stay assigned to Hot Cue 1 even though
another Cue Point may be stored earlier in the track.
Mapping Cue Points to the Hot Cue buttons is very intuitive – select the Cue Point that
you want to map, press the Map button and then the button you want to assign it to.
Quantized Navigation
A new navigation mode is introduced with TRAKTOR PRO called Quant. In this mode most
operations are executed in beat-accurate manner so that they can be used for remixing a
track in real time.
Quantized mode only affects skips during playback:
► Skipping to cue points and loops via Hot Cue Buttons.
► Skiping to cue points and loops via clicks on the Stripe display.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 184
16.5.3Synchronization
Sync Reference
TRAKTOR 3 used the horizontally opposite deck as reference when pressing Sync. Synching
vertically or diagonally opposite requires using the Master function. TRAKTOR PRO abandons this approach and always uses the Master Clock as synching reference.
This requires the Master Clock to be always in sync with the current main track. This is
achieved by automatically letting the Master Clock follow the tempo of the deck currently
having Master Deck status. To enable this mode, make sure the Auto button is enabled
in the Master Clock panel (click on the metronome on the left border of the Global
Section).
The deck playing for the longest, non-interrupted time-span receives the Master state.
The master status of the decks can be overridden at any time by clicking on the Master
button of another deck.
When clicking on the Sync button of the current Master Deck, the next best candidate is
chosen as Master Deck.
Effects Sync
TRAKTOR PRO effects always use the Master Clock as tempo reference. This unique tempo
reference for all effects makes it possible to use an effect on all decks at the same time
and by this allowing using it as master effect even in external mixer mode, what was not
possible in TRAKTOR 3.
16.6Beat Matching
TRAKTOR PRO does big steps forward in automatically matching the beats of two tracks.
The basis for automatic beat matching is the correct detection of beats in the music.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 185
16.6.1Automatic Beat Grids
When importing a new track into TRAKTOR PRO the following functions are triggered by
default:
Analysis
The audio material is loaded and scanned to create the following output
► Stripe: visual representation of the entire track
► Auto Gain: best gain settings for controlling the Auto Gain function
► Transients: a list representing the detected beats and their exact position within the
track. This list is required for accurate beat detection and is cached in a subfolder of
the root directory called “Transients”.
The preferences offer 2 options to always trigger Analysis, when importing a track or alternatively when loading a track into a deck. Non-analyzed tracks do not show a Stripe
(track overview) when loading them into a deck.
BPM Detection
The BPM detection is always executed when analyzing a track. The BPM value shown when
loading a not analyzed track is computed based on the currently playing part of the track
and is less accurate than the BPM detection triggered during analysis.
Results of the automatic BPM detection can be improved when adjusting the “Auto BPM
Range” to the genre of the tracks. BPM outside the range are not detected and the closest value within the range will be selected instead.
Automatic Grid Positioning
In TRAKTOR 3 the position of the Grid Marker had to be set manually. TRAKTOR Pro
now does this automatically. The automatic Grid Marker is placed at the beginning of the
track and not necessarily on a beat but in order to create a Beat Grid that best matches
all detected beats in the track.
This operation can be optionally disabled in the “Auto BPM” Preferences. Using BPM
without Grid Marker makes sense for tracks that have fluctuating tempo.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 186
Adjusting the Grid
The automatically created Beat Grid can be tested and adjusted in the same way as manually created Beat Grids. The fastest method is to turn on the Beat Tick in the Master Panel
and the Headphone Cue button in the mixer channel. This adds an audible tick for each
line of the grid. When these tick match the beats of the track, the grid is correctly set.
BPM Quality and Locking BPM
TRAKTOR Pro does not show the quality of the detected BPM like TRAKTOR 3 did. To
protect a manually adjusted Beat Grid form being overridden, the Grid Editing Panel offers a Lock Button.
Importing TRAKTOR 3 Beat Grids
BPM and Beat Grids and from TRAKTOR 3 are imported into TRAKTOR Pro by locking
all the tracks with BPM Quality at 100%. In TRAKTOR 3 a quality of 100% prevents the
BPM value from being changed by the detection, so are locked BPM in TRAKTOR Pro.
16.6.2Permanent Sync
By default the Sync function in TRAKTOR Pro is permanently switched on. To emulate the
momentary syncing behavior of TRAKTOR 3 the Sync button has to be pressed twice.
16.7Control
16.7.1MIDI Pages become MIDI Modifiers
TRAKTOR Pro extends the concept of TRAKTOR 3 MIDI pages by introducing 8 programmable MIDI Modifiers.
While a MIDI page offers additional mapping layers for all controls defined on a page, the
MIDI Modifiers are assigned to each control individually. This offers much more flexibility
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 187
and reduces the amount of workload because unmodified controller don not have to be
duplicated, like it was necessary when working with MIDI pages.
Each Controller assignment can additionally define two Modifiers with a value for each.
Only when the Modifiers have the defined values the command is executed.
Controllers themselves can be MIDI assigned like normal functions.
16.7.2 Range Controllers Direct Mode
TRAKTOR Pro offers a comfortable way to select individual values for functions controlled
via so called Range Controllers.
Example:
The list of pre-selected effects “Effect Select” is an example of a Range Controller. When
learning “Effect Select” to a button and choosing the Control Type “Direct” the field “Set
to value” displays all possible entries of the list. By selecting one of them, the button will
always select the effect directly when pressed.
MIDI Out for all parameters
The MIDI output functionality has been extended to all available controllers in TRAKTOR
Pro. MIDI Output is available also for some parameters that are pure outputs such as the
Deck Phase Meter, the Deck Level Meters and the Track End Warning time.
16.7.3 CD Mode
The old veteran CD Mode of TRAKTOR 3 has seen a slight change for being better usable
in combination with MIDI controllers. CD Mode now is a mode of the entire playback functionality. When switching TRAKTOR Pro to CD Mode, the Play and the Cue button behave
exactly like on a CDJ: when stopping playback a short stutter loop will play until pressing
Cue to set a new Current Cue Point.
The position of the stutter loop can be adjusted by dragging the Phase Meter or the
Waveform or by using the Beat Jump function in Ultra Fine mode.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 188
16.7.4 JOG Control Type
A new Control Type for controlling incremental functions such as Tempo Bend via endless
encoders has been implemented.
Formerly mapping Pitch Bend to an endless encoder was not functional because the endless encoder does not send a “Pitch Bend Off” message at the end. This has been realized
with the new JOG Control Type for endless encoders. This control type sends a “Reset”
message when no new data comes in from the controller.
16.7.5 Timecode Control and External Input
The size of the Timecode Panels has been increased in TRAKTOR PRO and they have been
moved into the decks. Calibration is now done with a dedicated button in the panel and
is not combined with the assignment to a deck as it used to be in TRAKTOR 3.
Both, Timecode Control and External Input Mode of a deck are set in a button menu, accessed via the arrow underneath the Deck letter.
The Timecode Panels themselves are opened via Layout Manger. The Deck associated
physical Timecode Inputs are selected in the Tracking Preferences page.
16.8More Features
16.8.1Resizable Browser Line Height
The height of the lines and the font size in the browser can be manually customized. This
can be used to display more (or less) of the covers in Cover Flick view.
16.8.2Setup Wizard
When starting the application for the first time, a Wizard will guide the user through a few
fundamental setup choices. Technically the installer will provide a set of default settings
files from which the Wizard selects the most appropriate one.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 189
16.9Dropped TRAKTOR 3 Features
16.9.1Native Mix Recorder
The Native Mix Recorder has been discontinued in this release. Mix recording is a rather
studio-/beginner-related functionality that we will bring back at a later point in time – but
then with full feature set and highly usable.
16.9.2Integrated Beatport Shop
The functionality of the integrated Beatport shop has been dropped.
NI and Beatport will start providing Traktor metadata tags as integral part of each purchased track with the launch of Traktor Pro. A recently launched download manager
at beatport.com covers the current functionality of the integrated shop. Both partners will
therefore focus their efforts on providing more additional metadata content to their users
rather than maintaining a second shop front end within Traktor.
16.9.3Browse Back Function
The Browse Back function in the browser has been discontinued. TRAKTOR Pro recalls
the selection and the search string for each playlist individually and offers a dedicated
button to browse back to the playlist containing the last loaded track.
16.9.4Punch, Talk, Booth
This group of functions emulating classical mixer features has been discontinued for their
low popularity and for simplification purposes.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 190
17.Troubleshooting
This chapter provides help for the most common among the rarely encountered initial
problems when getting started with TRAKTOR.
17.1TRAKTOR won’t start
► Check the system requirements for TRAKTOR. The minimum requirements are the
very least you can get by with, and are often not enough for advanced use (i.e. Key
Lock, Effects). Updating your RAM configuration may save you a lot of trouble.
► Make sure you have the most recent TRAKTOR version installed.
► Make sure that you have not clicked an outdated application alias/short&shy;cut.
► Try to restart your computer. Disconnect any audio interfaces and computer peripherals like printers, scanners and the like.
► Try to rename the file collection.nml in the Root folder for restarting TRAKTOR with
a clean Collection and then re-importing the renamed Collection.
17.2Tracks load but won’t play!
If your waveforms are not moving regardless of pressing Play, most likely something is
wrong with your Audio Setup.
Check the Selected Audio Device in TRAKTOR:
► Open TRAKTOR Preferences &gt; Audio Setup &gt; Audio Setup.
► Make sure you have selected the correct sound card. The Audio Device drop down list
shows all sound cards that have been installed on your computer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 191
► If your audio interface does not appear in the list, it is probably not correctly installed
or not correctly connected. Verify the mechanical connections and check the correct
installation of the sound card as described further below.
► You may need to deselect and re-select your sound card.
► If this does not work, try to select your audio interface, confirm with OK and then
close and re-open TRAKTOR.
Check the Output Routing in TRAKTOR
You may have selected the correct sound card but not assigned any of its outputs.
► Open TRAKTOR Preferences &gt; Audio Setup &gt; Output Routing.
► Make sure you have selected the right Mixing Mode. Internal will mix the signal inter-
nally and output the mix on the Master Output and the pre-listening signal at the
Monitor Output. External will output each deck individually on a separate channel for
being mixed in an external mixer.
► Verify if the section for Monitor and Master (or Deck A and Deck B in External Mixer
Mode) show valid outputs of the connected sound card.
► You may need to deselect and re-select the outputs to re-initialize the assign&shy;ment.
► If this does not work, make the correct assignment, confirm with OK and then close
and re-open TRAKTOR.
Check the Audio Control Panel in Windows
To check the correct installation of your sound card on a Windows computer do the following:
► Open “Start &gt; Control Panel &gt; Sounds and Audio Devices &gt; Audio”.
► For “Sound Playback &gt; Default Device”, drop down the list and make sure your sound
card is displayed in the list. If it is not, you may need to reinstall the drivers for your
sound card.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 192
Check the Audio/Midi Setup in Mac OS X
► To check the correct installation of your sound card on a Mac, do the following:
► Open “Macintosh HD &gt; Applications &gt; Utilities &gt; Audio Midi Setup” and click the
“Audio Devices” tab.
► For “Default Input”, drop-down the menu and make sure your sound card is displayed
in the list. If it is not, you may need to reinstall the drivers for your sound card.
17.3TRAKTOR SCRATCH PRO Troubleshooting
If you have installed Traktor Scratch Pro correctly, but the Timecode control does
not work, check the following:
Hardware
► Do the Input LEDs of the AUDIO 8 DJ blink when playing a Timecode record?
!
You cannot use USB 1.0 or 1.1
ports with the AUDIO 8 DJ!
► If not you should do the following to identify the source of the problem:
► Verify that the Audio 8 DJ is connected to your computer.
► Switch the mixer channel used for the Timecode input to Phono for monitoring the
signal coming from the turntable Do you hear the Timecode noise?
► Re-check all cables and connections including the USB cable.
► Try to connect a turntable playing a Timecode record directly to an input of the audio
interface to exclude the Multicore cable.
► Switch the Input Mode button of the Audio 8 DJ to reset the operation mode.
► Unplug and reconnect the Audio 8 DJ to exclude a bad state of the audio interface.
► Try to use a powered USB 2.0 hub to exclude underpowered USB port on your computer.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 193
Routing and Driver
Go to Preferences &gt; Audio Setup &gt; Input Routing and verify the assignments of the interface inputs to the TRAKTOR Input Channels.
The LED meters should show activity when a turntable is playing a Timecode records.
If not you should do the following to identify the source of the problem:
► Is the Audio 8 DJ (or your certified mixer) chosen as sound card in Preferences &gt;
Audio Setup &gt;Audio Setup?
► Check the version number of TRAKTOR SCRATCH PRO and the AUDIO 8 DJ driver
and make sure you use the latest version.
► Is the driver of the audio interface in use installed correctly? If you are not sure reinstall it.
► Close TRAKTOR, unplug and reconnect the Audio 8 DJ and restart TRAKTOR to exclude a bad state of the audio interface to software connection.
Assignment and Calibration
Check the calibration circles in each deck in the Scope View. The scope should look similar
to the image on the side. If it looks different, please refer to XX for learning more about
how to read the scope.
Are the scopes on the decks not correctly assigned to the turntables in use do the following:
► Is Scratch Control activated for all Decks that shall be controlled with Timecode? Click
the small arrow under the Deck letter and check this.
► Check the deck assignment in Preferences Timecode Setup. Each Timecode Input
should be assigned to one Deck.
► Re-calibrate by deselecting and re-selecting the On button in the Scratch Panels.
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 194
17.4TRAKTOR crashes
In case of a crash during runtime, please contact the Native Instruments technical
support team and send them your crashlog. You will find the crashlog in the following
folders:
► PC: \My Documents\Native Instruments\Traktor\Crashlogs\
► Mac: ~/Library/Logs/CrashReporter/
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 195
18.Getting Help
This chapter collects links to additional sources of information and support.
18.1Additional Documentation
To find out more about recent changes and additions, please read the “Readme.txt” file
placed in your Traktor installation folder.
18.2Software Updates
Traktor is constantly being improved. Please make sure that you are always using
the latest version of Traktor. After you have created a NATIVE INSTRUMENTS User
Account and activated Traktor, you can conveniently download updates using the NATIVE
INSTRUMENTS Service Center application. For more information about downloading
updates, please refer to the Service Center Quick Start Guide and the Service Center
operation manual.
18.3Support
If you are experiencing problems related to your NATIVE INSTRUMENTS product that the
supplied documentation does not cover, there are several ways of getting help:
Knowledge Base
In the Knowledge Base you will find answers to the most common support-related questions for all NATIVE INSTRUMENTS products:
www.native-instruments.com/knowledge
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 196
Technical Support
You can contact our Technical Support Team via:
www.native-instruments.com/suppform
Registration Support Team
If problems occur during the product activation procedure, please contact our Registration
Support Team:
www.native-instruments.com/regsuppfrm
User Forum
In the Native Instruments User Forum you can discuss directly with other users and
with experts from Native Instruments that moderate the forum:
www.native-instruments.com/forum/forumdisplay.php?f=105
Contact
For more information about other NATIVE INSTRUMENTS products please visit our homepage
www.native-instruments.com
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 197
19.Default Keyboard Mappings
TRAKTOR is installed with a variety of default keyboard mappings, find in the next chapters the keyboard mappings that are loaded per default.
Click on Application Menu &gt; Help &gt; Downloads to open the TRAKTOR Downloads sub-site
of the NATIVE INSTRUMENTS website. There you will find even more keyboard mappings,
additionally a variety of MIDI mappings.
19.1Performance Layout Traktor Pro
Transport
Command
Deck A
Deck B
Play
A
Z (en) / Y (de)
Cue
S
X
Beat Jump
Back D / Forward F
Back C / Forward V
Sync
G
B
Tempo Bend
Back H / Forward J
Back N / Forward M
Key Lock
K
,
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 198
Cue &amp; Loop
Command
Deck A
Deck B
Store Cue
Shift + 5
Shift + T
Hotcue 1 / 2 / 3 / 4
1/2/3/4
Q/W/E/R
Hotcue 5 / 6 / 7 / 8
Ctrl + 1 / 2 / 3 / 4
Ctrl + Q / W / E / R
Set 4 Beat Loop
6
Y (en) / Z (de)
De-/Activate Loop
7
U
Set Cue / Loop In
8
I
Set Loop Out
9
O
Loop lenght
dec. 0 / inc. “-” (en) &szlig;
(de)
dec. P / inc. “{“ (en) &Uuml; (de)
Left Shift + 0
Move Loop
Right Shift + “-” (en)
&szlig; (de)
Left Shift + P
Right Shift + “{“ (en) &Uuml; (de)
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 199
Favourites &amp; Navigation
Command
Global
Select Favourites 1 - 10
F1 – F10
Add Selection to Favourites 1- 10
Shift + F1 – F10
Jump through Favourites
Arrow Left / Arrow Right
Scroll through List
Arrow Up / Arrow Down
Search / Clear Search
Strg (Cmd) + F
Jump from Search to List
Tab
Jump to current Track
Shift + Enter
Load to Deck A
Ctrl + Arrow Left
Load to Deck B
Ctrl + Arrow Right
Command
Global
Layout select
Prev. L / Next “.”
Deck Size
Min. “:” (en) &Ouml; (de) / Max. “/” (en) “-” (de)
Jump through Favourites
Arrow Left / Arrow Right
Scroll through List
Arrow Up / Arrow Down
Search / Clear Search
Strg (Cmd) + F
Jump from Search to List
Tab
Layout
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 200
19.2Performance Traktor Scratch Pro (additions)
Scratch Modes
Command
Deck A
Deck B
Play / Internal Mode
A
Z (en) / Y (de)
Absolute Mode
S
X
Relative Mode
Shift + S
Shift + X
19.3Preparation Layout Traktor (Scratch) Pro
Transport
Command
Global
Toggle last Focus
Tab
Focus Next Deck
Shift + Tab
Play
A
Cue
S
Cup
Shift + A
Beat Jump
Back D / Forward F
Sync
G
Tempo Bend
Back H / Forward J
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 201
Key Lock
K
Cue &amp; Loops
Command
Global
Store Cue
Shift + 5
Delete Cue
Shift + Backspace
Hotcue 1 / 2 / 3 / 4
1/ 2/ 3/ 4
Hotcue 5 / 6 / 7 / 8
Q/W /E/R
Set 4 Beat Loop
6
De-/Activate Loop
7
Set Cue / Loop In
8
Set Loop Out
9
Loop lenght
Dec. 0 / Inc. “-” (en) &szlig; (de)
Move Loop
Left Shift + 0
Right Shift + “-” (en) &szlig; (de)
Edit
Command
Global
Move Grid Marker
Left I / Right O
Set BPM
Dec. P / Inc. “{“ (en) &Uuml; (de)
Auto Beatgrid
B
Lock BPM
Shift + L
Analyze Selection
Z (en) / Y (de)
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 202
Edit Selection
X
Relocate Selection
C
Command
Global
Save Collection
Strg (Cmd) + S
Add List to Collection
Strg (Cmd) + A
Favourites &amp; Navigation
Command
Global
Select Favourites 1 - 10
F1 – F10
Add Selection to Favourites
1- 10
Shift F1 – F10
Jump through Favourites
Arrow Left / Arrow Right
Scroll through List
Arrow Up / Arrow Down
Search / Clear Search
Strg (Cmd) + F
Jump from Search to List
Tab
Jump to current Track
Shift + Enter
Load to Deck A
Ctrl + Arrow Left
Load to Deck B
Ctrl + Arrow Right
Load to Focused Deck
Ctrl + Enter
Up Shift + Arrow Up / Down Shift + Arrow Down
Navigate through Tree
Collapse Shift + Arrow Left
Expand Shift + Arrow Right
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 203
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 204
Layout
Command
Global
Layout select
Prev. L / Next “.”
Deck Size
Min. “:” (en) &Ouml; (de) / Max. �“/” (en) “-” (de)
Jump through Favourites
Arrow Left / Arrow Right
Scroll through List
Arrow Up / Arrow Down
Search / Clear Search
Strg (Cmd) + F
Jump from Search to List
Tab
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 205
20. Index
Symbols
Advanced Knowledge
Backup Security ..................................... 144
Creating a portable TRAKTOR Version ....... 143
FX Details Filter:92 ..........................155, 159
FX Details Flanger Flux ............................ 155
FX Details Flanger Pulse .......................... 156
FX Details Gater ..................................... 158
FX Details Phaser Flux . ........................... 156
FX Details Phaser Pulse ........................... 158
MIDI Mapping Options . .......................... 126
Preferences
Cache ................................................... 114
Loading ................................................. 113
Timecode Setup ..................................... 112
Transport ............................................... 114
A
Adjusting the Grid ..................................... 187
Analysis ................................................... 186
Assignment (Timecode) .............................. 194
Auto Gain ................................................. 186
Automatic Beat Grids ................................. 186
Automatic Grid Positioning . ........................ 186
Automatic Looping .................................... 183
Autoplay . ................................................. 178
B
Beatgrid Panel ............................................44
Beat Matching .......................................... 185
Beatport Shop .......................................... 190
BPM Detection ......................................... 186
C
Calibration . .............................................. 194
CD Mode . ................................................ 188
Collection ................................................. 179
Current Playlist ......................................... 178
E
Edit Dialog .................................................68
Editing
Selection of Tracks . .................................. 69
Single Track ............................................. 69
Effects Sync ............................................. 185
External Input ........................................... 189
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 206
G
Getting Help ............................................. 196
H
Help ........................................................ 196
Hotkeys ................................................... 198
I
Incremental Search ................................... 180
J
JOG Control . ............................................ 189
K
Mouse Control ........................................ 4179
Ghost Pointer ...........................................99
Right-/Ctrl-Click Functions . ........................99
Sensitivities .............................................99
N
Native Mix Recorder .................................. 190
P
Permanent Sync . ...................................... 187
Playlists ................................................... 179
Pre-selection (Effects) ................................ 176
Pulse - Modulation .................................... 176
Keyboard Mapping . ................................... 198
Knowledge Base . ...................................... 196
Q
L
R
Layout Selector ...........................................23
Line Height .............................................. 189
M
Manual Looping ........................................ 183
MIDI Modifier ........................................... 187
MIDI Out . ................................................ 188
MIDI Page ................................................ 187
Queuing up songs . .................................... 178
root folder ................................................ 182
S
Send Mode . ............................................. 176
Software Updates . .................................... 196
Stripe ...................................................... 186
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 207
Support ................................................... 196
Contact ................................................. 197
Forum ................................................... 197
Registration Support Team ....................... 197
Technical Support ................................... 197
Sync . ...................................................... 185
Synchronization . ....................................... 185
T
Tags ........................................................ 179
Timecode Control ...................................... 189
Transients ................................................ 186
Transport ................................................. 182
U
Updates ................................................... 196
TRAKTOR PRO / TRAKTOR SCRATCH PRO – 208
">

Hello! I am an AI chatbot specifically trained to assist you with the Native Instruments Traktor Scratch Pro Operation manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!