VSP 618 User Manual V1.5
Video Processor User Manual
VSP 618
RGBlink Science & Technology Co., Ltd.
The pictures and data in the user manual are consult only, if there is
fluctuation, according to the real object please!
CONTACT US
Headquarter: S603 Weiye Building Torch Hi-Tech Industrial Development Zone
Xiamen,Fujian Province, P.R.C
Shenzhen office: Room A05, Floor 4, Building 24, Industry factory Nanshan
Science & Technology Park, Shenzhen, Guangdong Province, P.R.C
Tel: +86-592-5771197
Fax:+86-592-5771202
E-mail:[email protected]
http://www.rgblink.com
Revision
Format
Time
ECO#
Description
Principal
Release
Lisa
1.0
2010-1-15
0000
1.1
2010-3-11
0001
1.2
2010-4-26
0002
1.3
2010-7-29
0003
1.4
2010-8-10
0004
Compare table of AVDSP
Lisa
Displaying subtitles and LOGO
Lisa
Add the adjustable feature of
DE;Page:13-14
1. Add prompt to save function ;
Lisa
Lisa
Page:14
2. Add FAQ:
①
Display SDI1 or SDI2 in dual
display mode Page:32
②
HDMI display shows blue screen
Page:32
③
Can’t
be
saved
ALPHA
value
Page:32
1.5
2010-11-04
0005
1.
2.
3.
4.
5.
Compare table of AVDSP
VSP 618 frame size picture
Back Panel picture
front panel picture
Quick Start:
① How to control processor with
console software by USB?
②How to Use LINSN Ledset software?
Lisa
CONTENT
1.0 Safety ........................................................................................... 1
2.0 Specification .................................................................................. 2
2.1 Specification/Parameters ............................................................ 3
3.0 Connection .................................................................................... 6
3.1 VSP 618 Back Panel................................................................... 6
3.2 How to install ........................................................................... 8
4.0 Front Panel Keyboard Operation........................................................ 9
4.1 VSP 618 Operator Guideline........................................................ 9
4.2 Video Processor Menu ...............................................................11
5.0 Communication Software Guideline ..................................................16
5.1 Install Software .......................................................................16
5.2 Run AVDSP Console ..................................................................20
6.0 FAQ .............................................................................................29
6.1 No output in target display ........................................................29
6.2 VGA input could not work with AVDSP Console .............................29
6.3 DVI input could not work with AVDSP..........................................29
6.4 Component input could not work with AVDSP ...............................29
6.5 User settings can not save.........................................................30
6.6 Can’t update main board software ..............................................30
6.7 Display SDI1 or SDI2 in dual display mode ..................................31
6.8 HDMI display shows blue screen .................................................31
6.9 Can’t be saved ALPHA value.......................................................31
7.0 Quick Start ...................................................................................32
7.1 Single-screen control ................................................................32
7.2 Set dual screen fade .................................................................34
7.3 Displaying subtitles and LOGO....................................................35
7.4 How to control processor with console software by USB?................40
7.5 How to Use LINSN Ledset software?............................................44
8.0 Appendix ......................................................................................46
8.1 AppendixⅠDownload the main board software..............................46
8.2 Appendix II Download the IP software .........................................55
8.3 Appendix Ⅲ How to add tasks. ..................................................57
1.0 Safety
The general safety information in this summary is for operating person. Any
requirement, please feel freely to contact our service engineer.
Power Source
This product is intended to operate from a power source
between 85~265 volts rms . This product is only workable under
correct power condition, which is already mark on the back panel
of the power.
High Voltage
There are many high voltage components inside.
Do not Remove Covers and Panels
Do not remove Covers in any conditions. There are not any
spare components inside for maintenance, so do not maintain
this product by userrselves, any requirement, please feel free to
contact our service engineer. Keep heavy device from power
cord.
Grounding the Product and Use the Proper Fuse
This product is grounded through the grounding conductor of
the power cord. To Avoid electrical shock, plug the power cord
into a properly wired receptacle before connecting to the product
input or output terminals.
Keep away from Magnet, Motor, TV and Transformer.
Guard Against Damp
Keep using inside clean and dryness environment, once the
device get wet, must remove power cord right now.
Keep away Exploder
Do not operate the device inside dangerous and easy
explosive gas, which it may make fire, blast or something without
expectation.
Keep away Pour Liquid and Fragment
It is forbid to pour liquid, metal fragment or anything else
inside this device to avoid fire and other accident. Once that
happens, must remove power cord and try to make it clean
before power on again.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
1
2.0 Specification
AVDSP series video processors are designed by the latest high performance
image processing technology. AVDSP can handle following video without limit,
include CVBS(Composite)、S-Video (YC)、YCbCr、YPbPr、RGBHV(VGA)、
DVI-D、HDMI、SDI(SD-SDI、HD-SDI) and VOIP(Copper RJ45).
Compare table of AVDSP as following.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
2
2.1 Specification/Parameters
Composite BNC Input
Number of Inputs
3
Supported Standards
PAL/NTSC
Signal Level
1Vpp±3db
Multiplex
YCbCr
(0.7V Video+0.3v Sync ) 75ohm
S-video DIN4 Input
Number of Inputs
1
Supported Standards
PAL/NTSC
Signal Level
Y:1Vpp±3dB (0.7V Video+0.3v Sync ) 75ohm
U/V:0.7Vpp±3dB 75ohm
YPbPr BNC Input
Number of Inpus
BNC*3
Supported Standards
analog HD input
Signal Level
Y:1Vpp±3dB (0.7V Video+0.3v Sync ) 75ohm
Pb/Pr:0.7Vpp±3dB 75ohm
VGA DB15 Input
Number of Inputs
1
connetor
Standard DB15 socket
Supported Standards
VGA-UXGA
R、G、B、Hsync、Vsync:0 to1Vpp±3dB
Signal Level
(0.7V
Video+0.3v Sync ) 75 ohm
black level:300mV Sync-tip:0V
DVI Input
Number of Inputs
1
Connector
Standard DVI-I socket
SMPTE:625/25 PAL, 525/29.97 NTSC, 625/50p
Supported Standards
PAL,
525/59.94p
NTSC,
1080i50,
1080i59.94/60, 720p50 720p59.94/60
VESA : 800×600×60Hz , 1024×768×60Hz ,
1280×768×60Hz , 1280×1024×60Hz ,
1600×1200×60Hz , 1920×1080×60Hz ,
Signal Level
1920×1080×50Hz
TMDS pwl,single pixel input,165MHz bandwidth
Standard
DVI 1.1
SDI Input
Number of Inputs
2
Connetor
BNC
Data Rate Range
19.4Mbps~1.5Gbps
Supported Standards
ITU-R
VSP 618 User Manual
BT.656,ITU-R
BT.601,SMPTE
Doc. No:RGB-RD-UM-V618E001
259M,
3
Equalization)
SMPTE 292, SMPTE 297
Belden 1694A 100M HD1.485G , 350m SD
270Mbps
SDI Loop-out
Number of Loop-Throughs
1
Signal Level
800mV±10%
DC Offset
0V±0.5V
HD1.485Gbps<270 ps ; SD 270 Mbps 0.4
Rise/Fall Time
ns~1.5ns
Overshoot
Timing Jitter
<10%
SD<0.2UI;HD<1.0UI
Alignment Jitter
<0.2UI
HDMI Input
Number of Inputs
2
Connector
HDMI (standard type A interface)
SMPTE:625/25 PAL, 525/29.97 NTSC, 625/50p
Supported Standards
PAL,
525/59.94p
NTSC,
1080i50,
1080i59.94/60, 720p50 ,720p59.94/60
VESA : 800×600×60Hz , 1024×768×60Hz ,
1280×768×60Hz , 1280×1024×60Hz ,
1600×1200×60Hz , 1920×1080×60Hz ,
Signal Level
1920×1080×50Hz
TMDS pwl,single pixel input,165MHz bandwidth
Standard
HDMI 1.3
SDI Loop-out
Number of Loop-Throughs
1
Signal Level
800mV±10%
DC Offset
0V±0.5V
HD1.485Gbps<270
Rise/Fall Time
ps ; SD270
Mbps
0.4
ns~1.5ns
Overshoot
Timing Jitter
<10%
SD<0.2UI;HD<1.0UI
Alignment Jitter
<0.2UI
DVI Output
Number of Inputs
1
connetor
Standard DVI-I interface
800×600×60Hz
,
1024×768×60Hz
1024×768×75Hz
, 1280×768×60Hz
1280×1024×60Hz , 1440×900×60Hz
1400×1200×60Hz , 1600×1200×60Hz
1920×1080×60Hz , 1920×1200×60Hz
Supported Resolution
2048×1152×60Hz
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
4
,
,
,
,
,
TMDS pwl,165MHz bandwidth
Signal Level
VGA Output
Number of Inputs
1
connetor
Standard DB15 socket
800×600×60Hz
,
1024×768×60Hz
1024×768×75Hz
, 1280×768×60Hz
1280×1024×60Hz , 1440×900×60Hz
1400×1200×60Hz , 1600×1200×60Hz
1920×1080×60Hz , 1920×1200×60Hz
2048×1152×60Hz,2048×1536×60Hz
Supported Resolution
R、G、B、Hsync、Vsync:0 to1Vpp±3dB
Signal Level
,
,
,
,
,
(0.7V
Video+0.3v Sync ) 75ohm
black level:300mV Sync-tip:0V
HDMI Output
Number of Outputs
1
Connetor
HDMI (standard type A
800×600×60Hz
,
1024×768×75Hz
,
1280×1024×60Hz ,
1400×1200×60Hz ,
1920×1080×60Hz ,
Supported Standards
interface)
1024×768×60Hz
1280×768×60Hz
1440×900×60Hz
1600×1200×60Hz
1920×1200×60Hz
,
,
,
,
,
2048×1152×60Hz
TMDS pwl,165MHz bandwidth
Signal Level
Function
Source Switch
Support every signal with alpha key operation
PIP
PIP for SD with HD and HD with HD
Alpha Key
support
Extras
Communication
RS232
Power Supply
85-264V 2A IEC-3
Working Environment
0°C~45°C
Stored Environment
10% to 90%
Product Warranty
1year
Note:
TCP/IP
Specifications are subject to change without notice.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
5
3.0 Connection
3.1 VSP 618 Back Panel
1、Dial the code switch;
2 、 10/100M interface (copper RJ45). Used to connect the computer by
568B-568A twist-pair
3、USB interface,Used to connect the computer
4、RS232 interface (RJ11) for AVDSP processor. Used to connect the computer;
5-6、HDMI input interface。Input the signal from HD player, DVD, computer, and
so on.
7-8、SDI Input BNC, used to support SD/HD SDI input。Input the video signal
from the HD player, HD projector. It can connect to the 7 or 8 interface on the
next VSP618,using the 75ohm BNC.
9、SDI loop out BNC, used to loop input SDI signal to next SDI player.
10-11、Gigabit copper port, connect to LED screen.
12、Gigabit Transmitter card power interface, not use inside case;
13、Gigabit Transmitter card USB control interface;
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
6
14、Gigabit Transmitter card DVI input,connect to DVI output of VSP 618;
(This Connection does not support hot-plugging)
15-17、Composite input interface,Composite BNC. Used to input composite
signal (PAL, NTSC, SECAM compatible);
18 、 S-Video DIN 4, used to input S-Video signal ( PAL, NTSC, SECAM
compatible);
19、DVI input interface。Input the video signal from computer, DVI signal
generator. Connect to the same DVI interface on VSP;
(This Connection does not support hot-plugging)
20-22、R/Pr G/Y B/Pb BNC, used to support SD/HD progressive input, up to
1080p60;
23、VGA input interface, DB-15, used to support Analog RGB input; connect to
the VGA interface on VSP;
24、HDMI output, use to connect with HDMI monitor or HDMI player;
25、DVI output,connect to the monitor or LED display with DVI interface.
(This Connection does not support hot-plugging)
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
7
26、VGA output interface, connect to the monitor, projector and so on;
27~28、Switch and power. It must use IEC-3 power line. Always ground to avoid
electric shock.
3.2 How to install
VSP 618 frame size
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
8
4.0 Front Panel Keyboard Operation
Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last setting
config and send processed image to the target monitor. For the first setup, CV1
input is default source. With front panel keyboard, user can operate VSP with
menu display on LCD module.
4.1 VSP 618 Operator Guideline
VSP 618 front panel as following:
1、LCD Module;
2、Keyboard:
ESC: push to exit from current choice item;
SEL: push to confirm the current choice item;
UP: push to select up items;
DOWN: push to select down items;
LEFT:push to select left items;
RIGHT:push to select right items;
CV1:switch to composite 1 input;
CV2:switch to composite 2 input;
CV3:switch to composite 3 input;
SVID:switch to
s-video input;
YCbCr:switch to standard definition input;
VGA: switch to analog RGB input;
YPbPr: switch to high definition component;
DVI: Switch to DVI input;
SDI1:switch to SDI1 input;
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
9
SDI2:switch to SDI 2 input;
HDMI1:switch to HDMI 1 input;
HDMI2:switch to HDMI 2 input;
SAVE1:switch to use the user-defined mode 1;
SAVE2:switch to use the user-defined mode 2;
PBP:switch to show two pictures beside on beside;
PIP:switch to show picture in picture on the screen. CV1 is the default
small picture on the top left corner,
DVI is the default picture full
screen;
POP:switch to show picture out picture on the screen;
FS:switch to selet full screen or zoom view, just for single picture mode;
MENU: push to go to main menu;
FRE:push to freeze the video image or live again
(FreezeÆLiveÆFreeze)
AB: push to switch between front picture and back picture if works in
dual channel mode with alpha key, front picture will alpha key in step by
step and back picture key out step by step;
SCALE: push to go to between scaleÆzoomÆcropÆscale mode;
BRT:push to adjust the brightness and the contrast ratio, push to enter
to the relevant Menu, and then push the UP and DOWN to adjust the
brightness and the contrast ratio;
OUT: push to select the output format by using the UP and DOWN;
I/II: push to set single or dual channe;
SAVE: push to save current config;
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
10
4.2 Video Processor Menu
System menu as follows;
>VSP 618
*Dev Info
Recall
↓
Fig. 1
The first line shows VSP 618.
Push the right and left direction key to select the left or right menu. Before
the menu item, if there is a * sign, means the menu item has been selected;
you can push the Select key to enter it.
The ↑ on the right means you can select the menu items by pushing the up
and down direction key.
User can check the information of the equipment in “Dev Info” menu
(including the manufacturer、serial-number );
User can get more service and support according to the serial-number.
RGBLink Co ltd.
>SN:3204
User can check current input and output sources in Dev Info menu also.
Input: CV1 1024x768x60
Output: CV2 1024x768x60
Touch UP/DOWN to check customer service E-mail and web site address;
User can visit company web site for more product information.
[email protected]
www.rgblink.com
Touch UP/DOWN to check System time
System time:
2009-08-17
15:12:35
User can do a Factory Settings in Recall menu, after successful reset you will
see the menu as follows:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
11
Factory reset was completed !
Push the MENU to enter the main menu, and then push up and down
direction key, the menu as follows:
>VSP 618
*Language
Alpha
↑
Push the LEFT/RIGHT to select the relevant submenu.
LANGUAGE submenu as follows:
*LANGUAGE
>Chinese
English
Push UP/DWON to enter Alpha setup, user can set value from 0 to 100,
0 means video or graphic would be disappear and 100 means normal;
Port A and Port B stand for two channel picture;
*Alpha
Port A Value:
100
Push OUT to enter the Output menu, push the UP or DOWN to select
different output resolution, push OK to confirm the output resolution.
Advance submenu as follows:
Added adjustable feature of DE;
Press UP/DOWN and select the menu as shown in Figure 1:
>VSP 618
*Advance
XY_Pos ↑
Figure 1
Press LEFT/RIGHTand select XY_Pos to enter the submenu of adjusting
effective area;
H_BLANK
*HS:
46
V_BLANK
*VS:
38
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
12
XY_Pos:The sub-menu of which is used to adjust the position of overall effective
area shown on the screen or monitor.
H_BLANK: The overall effective area can be moved around by adjusting the
value of H_BLANK.
V_BLANK:The overall effective area can be moved up and down by adjusting the
value of V_BLANK.
Added adjustable feature of DE,support the following resolution:
Note:
"800x600x60 Hz "、"1024x768x60 Hz "、"1024x768x75 Hz "
"1280x1024x60 Hz "、"1400x1050x60 Hz "、"1600x1200x60 Hz "
Screen parameter:
Hsize:
1024
Screen parameter:
Hsize:
1024
Step:user can set the step of scale;
HSize:set the horizontal size of the image;
VSize:set the vertical size of the image;
HPos:set the horizontal position of the image;
VPos:set the vertical position of the image;
User can set size and position of the screen simply, Mainly applies to LED
screens users. After setting screen parameter, the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen。
Output
>1024x768x60
Push theⅠ/Ⅱto enter Single or Dual channel menu , push the UP / DOWN to
select the single or dual channel, push SEL to confirm the single channel or
dual channel work state;
Setup
Dual
Setup
Single
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
13
Select the input channel, push the UP/DOWN, and SEL to confirm the
different input channel. User can also push the channel name on the
keyboard to go into the input channel.
Source Select
>CV1
AB in VSP618 is for two image Alpha in and out.
Setup
A on B
OR:
Setup
A on B
Push SCALE to set the size and position of the image, push UP/DOWN and
SEL to confirm the relevant items;
Step:user can set the step of scale;
HSize:set the horizontal size of the image;
VSize:set the vertical size of the image;
HPos:set the horizontal position of the image;
VPos:set the vertical position of the image;
Scale
> Step
10
Push the FRE to freeze the live image or live the freeze image.
Freeze Frame
Once gain for live
OR:
Live Frame
Once gain for live
Push BRT to set the brightness and the contrast ratio:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
14
VSP 618
Brightness
50 ↓
VSP 618
Contrast
50 ↑
OR:
Push SAVE and then push SAVE1 or SAVE2 to save the operation to SAVE1 or
SAVE2;Push SAVE1 or SAVE2 to execute relative operation after user save
the operation sucessfully.
Select Save Mode !
Push Esc To Exit
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
15
5.0 Communication Software Guideline
AVDSP video processor is very easy to be configured with user friendly
communication software, support drag and drop operation for edit and display.
Also can customized with schedule function.
5.1 Install Software
Dual click AVDSP.exe to install, select Chinese or English version for use,
after click “select ”to next dialog.
If user agree to install this software, please click next to go on, else click esc to
exit this install.
And in next dialog is the user agreement of the software, click agree to go on
and refuse to exit.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
16
If users agree to the agreement, user can select install directory in next
dialog, else, click next to install software to default directory “C:\Program Files”.
Click “next”to go on.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
17
Click “next” to go on.
Click “finish” and ready to run AVDSP console.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
18
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
19
5.2 Run AVDSP Console
Run AVDSP.exe and the console will auto detect device in serial or networks by
detected Comm port and pro-define IP address.
After detect, open the device console, for example, if the device is VSP 618,
then VSP 618 console will be load, as following. Default loading is VSP 516 if can
not detect any device.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
20
Setup Communication
AVDSP Console support COM port or Ethernet (UDP) to access AVDSP.For the
first running ,user must click the
to close COM Port. Click
to change
the COM Port and the Baudrate.
Serial: user can make choice between existent com ports and baud rates;
default Baudrate is 115200.
Ethernet: user can fill any number less than 1023 in Local Port. The Remote Port
must be 192.168.0.100 and the Remote Port must be 1000.
The COM Port is decided by user’s COM. Right click my computer icon on
desktop, select HardwareÆDevice Manager in the system attributes dialog. The
COM in red in the picture is the COM user can make choice.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
21
Then click
to open COM.
will display after success to
connect the COM.
If AVDSP console success to detect device in chain, the software version, device
core version, firmware version and serial number will display on the bottom
right corner of the screen.
5
How to use
Operator can check parameters by software.
: Save script. Save current user config parameters as script.
: Open script. User can open saved script.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
22
: Import template. There are six templates for user.
: Export template. Export current config as template.
: Option. User can choose open device when start and using script saved
before or execute schedule edited before when start.
If user choose open device when start, user can use last run, use script file or
none when user start. User can click
to choose which script user want to
open.
If user choose execute schedule when start, the next dialogue will display when
software run.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
23
: Language. The software supports Chinese and English version. The
picture following is the Chinese dialogue.
: Exit.
Communication
: Open COM.
: Close COM.
: Set COM.
Device
: Synchronization.
: Save to flash.
:Load form Flash.
Load user config from flash, if 618, there are only 2 user mode; For 709, there
are only one user mode.
: Factory setup
: Advance, for adm. inistrator control.
: Execute schedule or stop schedule.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
24
Help
: Help. Display helps dialogue.
: About.
Output resolution: user can choose different output resolution by selecting
from pull down list.
Operating mode: choose to work in single channel or dual channel.
Layout: if in dual channel mode, user can set the device to work in PIP or PBP
mode directly with quick preset layout button as following.
Input: the white area display the name of input interface when the mouse is
over the interface picture on the left. The orange pane means current selected
interface.
If work in dual channel, channel 1 includes VOIP, CV1, CV2, CV3, SVideo, YCbCr,
SDI 1 and SDI 2, and channel 2 includes DVI, YPbPr, VGA, HDMI1 and HDMI 2.
The cross over interface picture means they can not access. The orange pane
means selected interface for channel 1. The blue pane means selected interface
for channel 2.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
25
Screen parameter:
User can set size and position of the screen simply, Mainly applies to LED
screens users. After setting screen parameter, the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen。
Images: User can scale the images;Image 2 can’t choose in single channel
mode.
Display Toolbar:
Display toolbar Users can set Alpha value of “dynamic Video” and “static current
frame” through display toolbar.
Setting Gamma is generally not recommended, since LED large screen itself has
Gamma function.
For further information, users can contact with our customer service team.
Output: user can customize the brightness and the contrast.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
26
Display: user can customize image or images position and size just by drag and
drop image (images) in this area. This process is sync to the parameters in
images toolbars.
Log: user can save or delete the operate log file.
Added functions
z Alpha delay time
Alpha can set AB button Fade effect.
z IP set
Users can set equipment IP, Usually used under the condition of one
computer control or remote control several computers.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
27
z Clock
Users can set or adjust lower computer time through” clock”
z Equipment Schedule function
Users can set device to work with schedule, and then device can automatically
switch between single or dual channel, resize image, switch video and with fade
effect in need.
Equipment currently supports max 10 regular content; users can set in the
“timing” option.
Specifically how to implement devising schedule function, please refer to
Appendix Ⅲ.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
28
6.0 FAQ
6.1 No output in target display
1) Check the output config of the input video.
2) Check the input channel config is ok. Ex.The composite 1 interface is
connected to the composite interface of video source.
3) Check the connection of output is ok.
4) Check the target monitor or display is not destroied or power down.
5)Check the output resolution of AVDSP is not out of the maximal resolution
of target display.
6) Check ALPHA value is not 0.
7)Any requirement, please feel free to contact our customer service engineer.
6.2 VGA input could not work with AVDSP Console
1)Check VGA source output is ok.
2)Check VGA input resolution is not out of AVDSP Console support list, as
following. The biggest input resolution is 1024*768*60Hz
3) Check AVDSP Console works in VGA input mode.
4) Any requirement, please feel free to contact our customer service engineer.
6.3 DVI input could not work with AVDSP
1) Check DVI source is ok.
2) Check DVI source output is not out of AVDSP support list.
3) Check AVDSP works in DVI input mode.
4) Check the connection between AVDSP and DVI source is correct. Restart DVI
source and check output.
5) Any requirement, please feel free to contact our customer service engineer.
6.4 Component input could not work with AVDSP
1) Check the connection between AVDSP and Component source is correct.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
29
Especially Y signal. Refer to cabling example in page 5. High Definition
component YPbPr is only support in YPbPr input。Standard definition YCbCr
support 480i and 576i only; High Definition YPbPr support 480i、576i、480P、
576P、720P50、720P60、1080i50 and 1080i60;
2) Check component source works, normally DVD component output should be
open from its menu.
3) No recommend to output component and SVideo input from the same source.
4) Any requirement, please feel free to contact our customer service engineer.
6.5 User settings can not save
VSP 618 supports multi config mode. For multi config mode, the equipment
starts to work automatically with the SAVE1 mode. According to different
equipments, you can solve the problems that modes can’t be saved by the
following steps.
VSP618
Confirm to press the “SAVE” button, then press “SAVE1”,or “SAVE2”, that will
save the current operation mode to the “user mode 1”,or ”user mode 2”, after
that, gently push button “SAVE1”,””SAVE2, it will call out the corresponding
setting of user-mode. If that, the saving is successful.
After saving process, user should not do factory reset or any saving operation to
user mode 1, otherwise, “SAVE1” will be over write.
6.6 Can’t update main board software
Connect the computer and AVDSP Series, select *.mot. Download file to device.
After the equipment power up, right-click the “.mot” file at the left side of menu,
when the screen shows “waiting for update”, you can update the main board
program. Next, choose the “download file to device”, start to loading.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
30
6.7 Display SDI1 or SDI2 in dual display mode
The way to display SDI1 or SDI2 in dual display mode: select SDI1 or SDI2
when in single display mode, press Ⅰ/Ⅱ to enter into dual display mode then
select SDI1 or SDI2 as source signal
6.8 HDMI display shows blue screen
In dual channel and the picture composition is: SDI+HDMI(including SDI1,
SDI2 and HDMI1, HDMI2 combine together), switching between SDI1 and
SDI2, or other signals switching to SDI1 or SDI2, when HDMI display shows blue
screen, then user needs to reselect the HDMI working signal.
6.9 Can’t be saved ALPHA value
ALPHA value can’t be saved when operating the AB key on the front panel to do
FADE IN FADE OUT, so user has to revise the corresponding value in the
Advanced Menu to save it.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
31
7.0 Quick Start
7.1 Single-screen control
Set screen parameters
Users can easily change the screen size and location by setting the parameters
with keyboard and LCD menu.
Press MENU to access main menu, Menu shows as below picture:
>VSP 618
*Dev Info
Recall
↓
Press UP / DOWN button to turn the menu shown as below pictures:
>VSP 618
*Advance
↑
Screen parameter:
Hsize:
1024
Step: Set the unit of zoom and move every time;
HSize:Set Horizontal size;VSize:Set vertical size;
Hpos:Set horizontal coordinates(horizontal phase);
VPos:Set vertical size(vertical phase);
Scale pictures
Step:Set the unit of scale and move every time; (Three steps available:1,
10,100)
HSize:Set horizontal size; VSize:Set vertical size;
HPos:Set horizontal coordinates(horizontal phase);
VPos:Set vertical size(vertical phase);
Scale
> Step
VSP 618 User Manual
10
Doc. No:RGB-RD-UM-V618E001
32
Set alpha
Enter Alpha sub-menu can set the alpha of video, Press UP /DOWN to set the
value of alpha; Port A and Port B represent two video channels;
*Alpha
Port A Value:
100
Set brightness contrast
BRT brightness and contrast button can set brightness and contrast of active
window video shown as below pictures:
VSP 618
Brightness
50 ↓
VSP 618
Contrast
50 ↑
BRT brightness and contrast button can set brightness and contrast of active
window video shown as below pictures:
VSP 618
Brightness
50 ↓
VSP 618
Contrast
50 ↑
Freeze Frame
Press FRE static frame button can freeze, press the button can freeze current
active window image; You can make the screen switch between static and
active with this button; Pictures show as below:
Freeze Frame
Once gain for live
or
Live Frame
Once gain for live
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
33
7.2 Set dual screen fade
1. Press Ⅰ/Ⅱ button to switch between single channel or dual channel. Menu is
as follows:
Setup
Dual
Setup
Single
2.Choose two input source from CV1、CV2、 CV3 、SVID、 DVI、YPbPr、VGA、
SDI1、SDI2、HDMI and HDMI2.
3. Press AB button to realize dual screen fade.
CV1、CV2、 CV3 、SVID、SDI1 and SDI2 is small screen defaully, DVI、YpbPr、
VGA、HDMI1 and HDMI2 is big screen defaully while realizing dual screen, If you
want the two faded screens the same size, you can set the screen size by SCALE
button. For LED users, who are familiar with studio operation can also set the
display window on PC with studio software by the third party. And PC output by
VGA or DVI, Use SCALE to make the CV1、CV2、 CV3 、SVID、SDI1 and SDI2
the same size as studio display window. AB button can quickly realize dual
screen fade;
Step:Set the unit of zoom and move every time;
(Device default three step:1, 10,100)
HSize:set horizontal size;
VSize:set vertical size;
HPos:Set horizontal coordinates(horizontal phase);
VPos:Set vertical size(vertical phase);
Scale
> Step
10
Press LEFT/RIGHT keys or touch UP/DOWN,select menu; * in front of the menu
means this menu is selected. Press SEL key, you can enter corresponding menu
to set and view.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
34
7.3 Displaying subtitles and LOGO
Users could add subtitles and Logo on the video by "set subtitle" option in "Video
Processor" menu
z Subtitles switch
By "subtitles switch" function, users can choose whether to display subtitles and
subtitles background on the video.
Note:
Subtitles show on top of the image without subtitle
background.
Foreground transparency refers to subtitles’s transparency and background
transparency refers to subtitles background, which defaults to be 50%
transparent, user can not adjust the value of this transparency.
z Displaying Subtitles
Fill in the subtitles blank with words that you need to show on display(eg.
Advertising Slogans), maximum 80 characters allowed. Then click the “submit”
button, subtitles will appear on the screen soon.
Size of subtitles is limited, Chinese fonts defaults to be Times
Note: New Roman and size is 24X24 (pixels); English font defaults
to be Arial, size of 16X24 (pixels). The subitle font could not
be modified at present.
z Subtitles color or subtitles background color
Users can change the subtitles color or subtitles background color through
dragging the scroll bar by mouse or make choice in the color palette to select the
right color
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
35
z Subtitles movement
Figuration of parameters in the "subtitles rolling" menu, subtitles could be
rolling or static, at present, the device supports horizontal rolling( left or right)
only, vertical rolling is not available at present.
z Subtitle rolling Speed
Through dragging the scroll bar by mouse to set the speed of rolling subtitles.
z
Subtitles position
By setting the value of horizontal or vertical coordinates, subtitles position on
the screen can be adjusted.
Subtitles Width refers to the width of the subtitles display area. As long as the
parameters have been set, subtitles will be displayed in the figurated area.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
36
z
LOGO display
Users could made any LOGO displayed by the LOGO display function.
Users can choose whether to enable the LOGO display function according to
circumstance.
When users select the "background color mark", the screen background color
would be black and LOGO shows on it.
When users select "trademark transparent", LOGO would be translucent.
When users select "trademark transparent", LOGO would be
Note: translucent.
The value of this transparency could not be modified.
Users could change the image format and pixels with
software in window
OS. The picture would be cut on the right side and bottom if it is too big.
If the current picture is larger than the new size, the right side and the bottom
part of the picture will be cut off in order to adapt to smaller areas.
If the image is too big, users would have to cut the picture first. by the Toolbox.
Change image size, and then click "properties” on "image" menu, and select the
width and height of the measurement in pixels. Enter the width and height
values in the "width" and "height" box.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
37
Note:
the device support only 16 bit color bitmap in bmp format with
maximum pixels of 256X128
After LOGO picture was adjusted to specified size, save the image to 16 bit color
bitmap bmp format.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
38
z Download LOGO
After LOGO picture was adjusted to specified format and size, users could
download it to the device, and then enable the LOGO display function, the LOGO
would be displayed on the screen.
By setting the parameters of X or Y coordinates, LOGO position on screen can be
adjusted.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
39
7.4 How to control processor with console software by USB?
1. Install the driver;
Connect the USB cable to the PC and the video processor. Turn on the VSP 618
for the first time to use USB, the PC will remind finding the new hardware and
ask to install the driver for this new driver.
Install from the list or specified location, press “NEXT”:
Press “ browser” to find the driver, and press “NEXT”
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
40
When the installation finish, can go to check the installed COM port inside the
device management, as following picture show:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
41
2. Install the console software, and run after install, shows the interface of the
console as following:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
42
:Set the RS232 as installed just now, and set the VSP 618 Boud Rate
to be: 115200.
Press
to start RS 232 communication, when there is green point in the
right down corner showing on the software, it means the communication is OK,
and you can use the software to control the device now; the software operation
is the same as VSP 618, just can see the difference of the SDI input;
If power off during communication, should close the port
Note:
by
first, and plug in out of the USB and do communication
again.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
43
7.5 How to Use LINSN Ledset software?
1. First, Install AVDSP software and LINSN software.
2. Run AVDSP software;
①Press
to set the RS232. first choose the current RS232 you are using,
then set the baud rate.
VSP516 and VSP516H Baud Rate work as 9600, while VSP516S
Note:
Press
Baud Rate work as 115200.
to start the RJ232, when the green point showing on the right
down corner, it means the communication is successful.
Press
:option. Find the LINSN software installation file LEDSET.EXE
through “external progress route”as following picture:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
44
As LINSN software will use RS232 for communication too, so user should first
close AVDSP console software RS232 communication after that press
If in used
;
, then to start the LINSN software. When you want to use AVDSP
software, you just need to close LINSN software, start the RS232
again.
Before using AVDSP console software to execute the LINSN
Note::
software, you should first internally connect the device's 100M
board with sending card.
Any question, please feel free to contact our customer service
engineer.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
45
8.0 Appendix
8.1 AppendixⅠDownload the main board software
z
Installation
Double-click fdt2_2 setup.exe.
Click the next button.
Click the yes button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
46
Click the next button.
Click the next button.
Unselected the H8S/2000, H8S/2000, H8. Click the next button.
Select 7144.45, Click the OK button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
47
Select the location by browse. Click the next button.
Click the next button.
Click the next button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
48
Click the finish button. It’s ok.
z
Download
Open the Flash Development Toolkit 2.2.
Click the OK button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
49
Fill the name. Click the OK button.
Click the (Y)button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
50
Click the (Y)button.
Fill the name. Click the OK button.
Select the sh/7145f. Click the next button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
51
Select the COM port. Click the next button.
Click the next button.
Click the next button.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
52
Click the finish button.
Select project/properties/communications. select the COM port in user setting.
Do not check User default baud rate and select Target Baud as 9600.
Click the target files by the right mouse. Select add files to project , and select
user *.mot.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
53
Connect the computer and AVDSP Series, select *.mot. Download file to device.
After the equipment power up, right-click the “.mot” file at the left side of menu,
when the screen shows “waiting for update”, you can update the main board
program. Next, choose the “download file to device”, start to loading.
After update, the device will auto run into operation mode without reset
process.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
54
8.2 Appendix II Download the IP software
Turn off the power, take the two coding switch to “ON” sate. As below:
Connect one side of the RJ11 download line to the RS232 on the video processor,
and the other side to be connected to the serial port on the PC.
Double click
to run Flash Magic ,setting as below:
First, users can choose the right serial port, set the baud rate to 115200, choose
LPC2368,and to load the aim document (hex.document) of IP board upgrading.
Secondly, confirm the two option box by tick.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
55
Finally, click the “Start” button.
After download, exit the program, turn off the power, tack the two coding switch
back, as below, restart the equipment power, check if the equipment work
normally.
Flash Magic download website:
Note: http://rgblink.com/_d269872174.htm
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
56
8.3 Appendix Ⅲ How to add tasks.
Use “Device Schedule” can add tasks,make device automatically run to the
Schedule input source in specified time or schedule display modes such as fade
in and out.
z
First of all,set lower computer current time through host computer “clock”.
Note:
Reset to factory settings after setting the clock will affect the
time before.
After Clock setting, users can check whether successfully set through button.
Press MENU button to enter system main menu, then press Dev Info (device
information), then press SEL button can show device information. Touch
/DOWN,check in the System time. Shown as below picture:
System time:
2009-08-17
z
15:12:35
After device clock set, add task plan through” Timing Parameters”.
1. Users need to start “time-enabled” before using” timing device”. If you
forget to start, time set may fail.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
57
Click “start” button
, when the button changes to
, it means
time can start.
Press MENU button can enter system main menu, touch UP/DOWN to enter
advanced menu, shown as the picture:
>VSP 618
*Advance
↑
Press SEL button to enter advanced menu
Time:
Time Able
2. When the timer count is set to 1, it indicates that the setting contents will be
stored in the “timing 1”. If you need to set more, you can set up one by one and
saved in different “Timer index”.
Note:
Equipment currently supports 10 task scheduler.
3. Set “task schedule” playing time,can up to second.
4. Select the signal source to play works in dual channel or single channel mode,
and check whether to use fade during dual channel mode.
5. Users can control the image position and size by change the data or click the
drop-down arrow.
6. When device works under the single channel mode, click the interface Icon.
Red box indicates current interface has been selected as the input interface;
When device works under the dual channel mode, need to switch image 1 and
image 2 set input signal one by one.
Users can see the image 1 and image 2 input source information in the input
source toolbar after setting. Shown as the picture:
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
58
7. When you finished above step, click button
to finish adding” tasks
plan”.
Click button
,you can see the input source, playing time, image size,
position etc. of the current “tasks plan”
Users can see all the “tasks plan” relevant content through “Timer index”
switching
.
VSP 618 User Manual
Doc. No:RGB-RD-UM-V618E001
59
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement