HiTi P110S photo printer User manual

HiTi

User Manual

www.hiti.com

HiTi P110S user manual

General Information

Copyrights

All rights reserved. The information contained in this user guide is subject to change without notice. HiTi Digital,

Inc. makes no warranty with regard to the material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HiTi Digital, Inc. will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of the material.

Safety Precautions

1. Never attempt to disassemble or modify the printer. Doing so may lead to electric shock or printer malfunction.

2. Do not allow liquids near the printer, which may lead to electric shock or fire.

3. Do not use the printer if the printer body is damaged.

4. Avoid plugging the printer into a socket being used by couple appliances.

5. Do not place the printer on an unstable cart, stand, or table.

6. Make sure the printer is operated under the type of power indicated on the marking label. If you are not sure

the type of power, please consult your dealer or local power company for detail.

7. Do not block the air vents to protect the printer from overheating.

8. Do not insert or drop metallic, flammable, or other foreign substances into the machine.

9. Always unplug the printer for servicing.

FCC Notice

Do not make any changes or modifications to the equipment unless otherwise specified in the instruction.

This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Hwever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Ȟ

1ȟReorient or relocate the receiving antenna.

Ȟ

2ȟIncrease the separation between the equipment and receiver.

Ȟ

3ȟNever push objects into this equipment through cabinet openings, which may touch dangerous voltage points

or short out parts that could lead to a fire or electric shock.

Ȟ

4ȟNever spill liquid on this equipment.

Ȟ

5ȟConnect the equipment into an outlet on a circuit difference from that to which the receiver is connected.

Trademarks

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Mac, Macintosh, and Mac OS are trademarks of Apple

Computer, Inc., registered in the U.S. and other countries. Pentium is a U.S. trademark of Intel Corporation.

All other trademarks or registered trademarks are properties of their respective companies.

i

Table of Content

General Inofrmation

ƦCopyrights

ƦSafety Precautions

ƦFCC Notice

ƦTrademarks

1. Check the Package Content

ƦAcquiring the Latest Software

2. Comprehend P110S

ƦFront view

ƦLED indicators 3

ƦBack view

ƦInternal view

ƦOptional Consumables

Photo Print Pack

ƦOptional Accessories

Battery Pack

Carrying Bag

Cleaning Kit

3. Installing P110S

ƦInstalling the Ribbon Cartridge

ƦLoading the Photo Paper

ƦPowering Up the Printer

Powering Up the Printer with the AC adapter

Powering Up the Printer with the Fully Charged Battery Pack(Optional)

4. Using the Battery Pack (Optional)

ƦPowering Up the Printer with the Battery Pack

ƦHandling of the Battery Pack

5. Standalone Printing

ƦPrint Photos Without a PC

ƦHome Menu Introduction

ƦMain Function Introduction

Quick Print

Multiple Print

Print All

ID Photo

Event Photo

Setup

ƦPrinter Setting

ƦPrintout Setting

ƦSpecial Function Introduction

Shortcut editing

Template setting

Cleaning mode

Print Count

PIN Code

LCD Adjustment

Color Setting

Image Adjuster & Enhancer

Power Management

6. PC-Link Printing

ƦConnecting the PC and Printer

ƦInstalling the Printer Driver

ƦInstalling the iDQuickDesiree

7. Troubleshooting

ƦIndicator Status

8. P110S Specification

9. Customer Service Information

ƦOnline Support

ƦGlobal Sites

1

HiTi P110S user manual

9

10

11

11

7

7

7

5

5

5

6

18

25

25

25

25

26

26

27

28

28

28

2

2

4

4

4

3

3

3 i

i

i i i

4

HiTi P110S user manual

1. Check the Package Content

Before using photo printer P110S, please check the package content for following items*:

Photo Printer - P110S

Paper Cassette

Adapter

Power Cord USB Cable Master CD

Quick Guide * Printer Cleaning Kit

Note

* Package content may vary in different regions. For any question about your printer, please contact your HiTi representative

* Printer Cleaning Kit includes cleaning kit user guide and cleaning paper.

Acquiring the Latest Software

HiTi website provides the latest driver, application, user manual etc for users to download. Please log on to www.hiti.com for more information. If there is any question toward HiTi product, please contact your local service center for detail.

2

HiTi P110S user manual

2. Comprehend the P110S

Front View

Power Switch

2.5” LCD Panel

Function Buttons

Memory Card /

USB host Slots

Paper Cassette Button

Paper Cassette

Paper Exit

Ribbon Door

EDIT

ESC

Directional Pad

Directional Pad

Hot Key

Print

Power

OK

Directional Pad

Directional Pad

Printer Status

Battery Status

Printing Status

Note: Users are allowed to select favored ID formats as shortcuts.

LED indicators

Indications

(Printer Status)

(Battery status)

(Printing status)

Descriptions

Flashing red light: Error (# of blinks following the factory standard)

Flashing green light: Power on but printer not ready yet

Steady green light: Power on and printer ready

Flashing orange light: Low battery

Steady orange light: Battery charging

Off: Battery fully charged

Flashing blue light: Ready to print

Steady blue light: Printing in action

Off: Not ready to print

3

Back View

Back Panel

Release Button

Back Panel

USB Socket

Power Socket

Optional Consumables

Photo Paper / Stickers* x 60 sheets

Internal View

Battery Slot

Paper Guide

Door

Battery Lever

HiTi P110S user manual

Ribbon x 1 cartridge

Note

1. It is recommended to load no more than 50 sheets of stickers into the cassette.

2. Do NOT roll the ribbon manually to prevent the ribbon skip.

3. Be sure to bend the perforated strip down from the printable side and then bend up to tear off completely.

(See below illustration)

C A B

Optional Accessories

Ʀ

Battery Pack ƦCarrying Bag ƦCleaning Kit

4

3. Installing the P110S

Remove the Cushion Inside the P110S Before Using the Printer

HiTi P110S user manual

Be sure to remover the cushion inside

P110S before using.

Users may keep the cushion for protection during transportation.

Installing the Ribbon Cartridge

Open the ribbon door and install the ribbon cartridge, then close the ribbon door

Open the ribbon door

Insert the ribbon cartridge.

Loading the Photo Paper

1. Follow the instruction marked on the plastic bag for correct paper handling wider strip

2. Press the paper cassette button to release the paper cassette. Load photo papers into the paper cassette

and then close the cover

Press the paper cassette button to release the paper cassette.

Load photo papers into the paper cassette and then close the cover, insert the paper cassette into the slot.

Ɏ

4”x6” photo paper and 4”x6”

sticker (1x1) are both

compatible with P110S.

It is recommended to load no more than 50 sheets of stickers into the cassette.

5

Power up the Printer

Power up the printer with AC adapter

Connect the adapter and the power cord, and plug into the printer and power slot.

HiTi P110S user manual

Turn on the power.

(Optional) Power up the printer with the fully charged battery pack.

Press back panel release button.

Insert battery into battery slot.

Turn on the power.

Note

1. Printer will be automatically turned off when cease working for a period of time (user defined).

2. To charge the battery pack, see user manual for detail.

Caution: Please do not remove the power cord during the printing operation even

when the presence of the battery. Ribbon/Paper jam may occur.

6

4. Using the Battery Pack*

Power up the Printer with the fully charged battery pack

HiTi P110S user manual

Ʀ

Press back panel release button.

Ʀ

Insert battery into battery slot.

Ʀ

Turn on the power.

* Note

1. Printer will be automatically turned off when cease working for a period of time (user defineable), see Special

Function/ Power Management for detail.

2. As to save battery energy, please refer to Special Function/ Power Management.

Handling of the Battery Pack

1. Checking the battery status

Indication Description

Fully-charged battery.

To use the printer for a long time, we recommend using fully-charged battery or recharging the battery before using.

Low battery power.

Operations other than printing are possible. Change it with a fully charged battery or recharge the battery pack with the printer’s compact power adapter immediately.

The adaptor is connected.

7

HiTi P110S user manual

2. Proper Usage and Handling

1. Do not use the battery pack in products other than those recommended by HiTi.

2. Do not attempt to open the battery pack.

3. Never make the battery pack short circuited. The battery pack may be easily short-circuited by putting them on

conductive material.

4. Seal break may cause electrolyte leakage which may lead to short circuit, smoke emission, bursting and/or

ignition.

5. Store or charge the battery pack at low temperature ( below 20? is recommended, see “Specification” session

for detail ), low humidity, no dust and no corrosive gas atmosphere, not in direct sunlight or close to a heating

source.

6. It’s recommended to recharge the battery packs periodically for more than 6 months storage.

3. Charging the Battery Pack

1. Be sure to use only Hiti P110S printer or PBC-110 charger to recharge the battery pack.

2. To fully charge the battery pack, you need to insert the battery pack into P110S printer or PBC-110 charger and

plug in the compatible adapter, with continuous electricity supply, it takes approximately 3.5 hours on P110S

and 2 hours on PBC-110 charger.

Ʀ

HiTi recommends to recharge the battery pack in a temperature of 0~+40ƫ (41~104ƭ)

Ʀ

Charging time varies according to the ambient temperature and charge state.

Ʀ

This battery pack is a Li-ion battery pack, no need to discharge it completely before recharging.

3. Fully charge the battery before first use.

4. To ensure of using a fully charged battery pack, it is recommended to charge the battery pack till it’s fully

charged before using.

Ʀ

The battery pack discharges naturally.

5. The battery pack capacity may diminish substantially after a period of using time.

Ʀ

After approximately 200 times of recharging, the fully recharged capacity may drop to 70% in normal operating

8

HiTi P110S user manual

5. Standalone Printing

Printing Photos Without a PC

1. Distinguish the type of memory card

CompactFlash

Compact Flash (CF) & Micro drive

Memory Stick (MS)

Memory Stick Pro (MS Pro)

Secure Digital (SD)

For smaller memory cards such as Memory Stick Duo, please use appropriate adapter card in order to be used on the P110S. Please contact your memory card manufacturer for more detail.

2. Insert memory card *

SD/SDHC

MS / MS Pro

CompactFlash

Top

Top side facing up

Compact

Flash

Bottom

For smaller memory cards such as Memory Stick Duo, please use appropriate adapter card in order to be used on the P110S. Please contact your memory card manufacturer for more detail.

9

3. Print your first photo without a PC

A. Install ribbon cartridge

(Please see ‘Installing P110S’ for detail)

B. Load photo papers

(Please see ‘Installing P110S’ for detail)

C. Power up the printer

(Please see ‘Installing P110S’ for detail)

D. Insert memory card or USB storage derie

(Please see ‘Inserting the memory card’ for detail)

Comp ac tFla sh

E. Print photos

(Please see ‘Quick Print’ on pape 11)

10

HiTi P110S user manual

HiTi P110S user manual

Home Menu Introduction

Border print on / off eFrame selected

Date print on / off

Image source/

Blue tooth detector

Power saving mode on / off

DC in/ Battery

Quick print Printing mode

Selected print

S e t u p

Setup

Description of Function

1. Quick Print

Printing one photo at a time without edition.

001 002

Quick Print

Choose Quick Print, and press

( ) to continue.

Note that Quick Print function does not allow user to edit the photo selected.

003

ESC

004

OK

Select a photo, and then press

( ) or ( ) to start printing.

The image is being printed.

11

HiTi P110S user manual

2. Multiple Print

Batch processing for more than one image or additional copies are needed at a time.

A. Selected Print

1 2

M u l t i p l e p r i n t

3

001 002

Choose MULTIPLE PHOTO, and press ( ) to continue.

S E L E C T E D P R I N T

Select Selected Print, and then press ( ) to continue.

003

ESC

004

EDIT OK

Pick a photo for output, and then press ( ) to continue or press [EDIT] to start editing.

As to how to edit photos, please see Special Function

Introduction for detail.

4

01

ESC OK

Use directional button to determine the number of copies, and then press ( ) to go back image navigator.

5

001 002 x01

003

ESC

004

EDIT OK

The number of copies chosen is displayed at lower right corner.

Repeat step 3 and step 4, when everything is done, please press

( ) to start printing.

6

The images are being printed.

B. Print All

All of the images in the memory device will be printed.

M u l t i p l e p r i n t

Choose MULTIPLE PHOTO, and press ( ) to continue.

P R I N T A L L

Select Print All, and then press

( ) to continue. Note that

Print All furotion does not allow user to edit individual photo.

S u r e t o p r i n t a l l ?

: 5 2

ESC OK

Confirm the number of total prints, and press ( ) or ( ) to start printing. Or press

( ) to go back.

12

HiTi P110S user manual

3. ID Photo

1

Choose ID PHOTO, and press

( ) to continue.

2

R e g i o n

A s i a p a c i f i c

C h i n a

E u r o p e

I n d i a

M i d d l e E a s t / A f r i c a

N o r t h A m e r i c a

S o u t h A m e r i c a

ESC OK

Select a desired region and press ( ) to continue.

Region selection currently is only available on the printer purchased in North America and South America.

Only ID formats for North America and South America are available now.

More ID formats will be provided in the future.

3

A

A

A

A

A

A

A

A A

B

A

B

A

B

A

A

A

A

A

B

A

A

A

B

ESC OK

Select an ID format, and then press ( ) to continue.

4

ESC OK

Load images into column highlighted.

5

001 002

003

ESC

004

EDIT OK

Select an image, and then press

( ) to continue.

6 7

ESC OK

Repeat step 3 and step 4 to finish loading images into the second column.

X 0 3

ESC OK

* When all columns are filled,

please determine the number

of copies and press

( ) to start printing.

Note

Ʀ

It is allowed to change images loaded before by pressing [SWAP] when the selector aims at the image.

Ʀ

If your printer is in Event Photo mode, please refer to the [SETUP] part to switch to ID Photo mode.

Ʀ

P110S ID formats are saved in the internal memory of the printer. User may freely delete the undesired ID

formats from the printer and add new formats from the ID Creator application software bundled.

Ʀ

Selection in ID Photo will be memorized and applied to overall setting. You only have to make the selection

once unless you want to change to other region.

13

4. Event Photo

Select “Event photo”, press

( ) to continue.

001 002

003

ESC

004

OK

Select an eFrame, and then press ( ) to continue.

HiTi P110S user manual

E v e n t p h o t o eFrame mode is on.

Note

Ʀ

If your printer is in ID Photo mode, please refer to the [SETUP] part to switch to Event Photo mode.

Ʀ

Please be noted that when the eFrame mode is on, all photo will be printed with eFrame automatically.

Ʀ

eFrame can be enabled or disabled in Event Mode.

Ʀ

P110S eFrame are saved in the internal memory of the printer. Users can freely add new or delete undesired

eFrames from the printer.

Ʀ

Please create eFrame via “eFrame convertor,” see the user guide of eFrame convertor for detail.

14

HiTi P110S user manual

5. Setup

A. Printer setting

S e t u p

Choose SETUP, and press

( ) to continue.

S e t u p

P R I N T E R S E T T I N G

Printer Setting: Allows users to set modes, template, power management, language, LinkPrint, cleaning mode, PIN code reset, print count, and LCD adjustment.

Press OK to continue

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

Mode Switch: P110S has 2 built-in modes which users can switch freely. When “Event mode” is

chosen, you can see the icon

( ) in main menu.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

ESC

Quick Print

OK

Template Setting: Choose

Template Setting and press

( ) to continue.

As to how to select a region, load/ browse/delete template, please see Special Function

Introduction for detail.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

ESC OK

Power Management: Choose

Power Management and press

( ) to continue.

As to how to set the power saving setting, please see

Special Function Introduction for detail.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

ESC OK

Language: Accessible languages on P110S may vary from region to region.

Press OK to enter the language selection. Move up/down to the desired language and press OK to select. Then press ESC to save the change and exit.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

ESC

Quick Print

OK

LinkPrint: Select the behavior of

USB host by choosing ( ) to use the USB device as a mass storage device. Select ( ) when printing directly from a camera.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

ESC OK

Cleaning Mode: HiTi strongly suggest users to utilize this function frequently to keep the printer in optimal condition.

Please follow the instruction of the cleaning kit to proceed the printer cleaning.

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

PIN Code: The PIN code is used to protect the print counter against being erased.

As to how to set the PIN code, please see Special Function

Introduction for detail.

15

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

Counter: User can see or erase the accumulative print count.

The PIN will be needed to zero the current print count.

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC

Quick Print

OK

About: It displays information about the current printer firmware, color table version.

HiTi P110S user manual

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

LCD adjustment: Choose LCD

Adjustment and press ( ) to continue. As to how to adjust

LCD, please see Special

Function Introduction for detail.

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

Print position: User may adjust horizontal position of printout via this function.

Please follow the on screen instruction to proceed.

16

HiTi P110S user manual

B. Printout setting

S e t u p

Choose SETUP, and press

( ) to continue.

S e t u p

P r i n t o u t s e t t i n g

Printout Setting: Allows users to set color setting and to enable or disable I2O, black/white, border print, and date print.

Press OK to contiune p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC OK

Color Setting: To modify color setting, process into editing.

As to how to edit color setting, please see Special Function

Introduction for detail.

p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC

Quick Print

OK

I2O: User can enable this function to automatically enhance the quality of printouts.

Move up/down and press

OK to select. Then press

( ) to enable/disable the function.

p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC OK

Black / White: The color tone will simply change into black and white by enabling this mode.

Move up/down and press OK to select. Then press ( ) to enable/disable the function.

p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC OK

Border Print: The printouts will be framed with borders.

Move up/down and press OK to select. Then press ( ) to enable/disable the function.

When “Border Print” is enabled, you can see the icon ( ) in main menu.

p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC

Quick Print

OK

Date Print: To display the date information of the printout.

When “Date Print” is enabled, you can see the icon ( ) in main menu.

17

HiTi P110S user manual

Special Function Instruction

1. Shortcut setting

S e t u p

In the home menu, press [EDIT] to ID format shortcut list.

A

A

A

A

A

A

A

0 0 2

0 0 3

ESC

0 0 4

EDIT:select OK

To edit a shortcut, press [EDIT] to

ID format list, then use directional buttons to pick.

Note that to re-edit shortcuts is allowed.

A

A

A

A

A

A

A

A A

B

A

B

A

B

A

A

A

A

A

B

A

A

A

B

ESC OK

Press ( ) to select the ID format as a shortcut.

A

A

A

A

A

A

A A

A

A

A

A

0 0 3

ESC

0 0 4

EDIT:select OK

Repeat step 2 and step 3 to finish shortcut editing.

Note that users can freely define up to 4 shortcuts.

A

A

A

A

A

A

A

A A

B

A

B

A

B

A

A A

B

A

A

A

B

A

A

ESC OK

To get to a certain ID format shortcut, use directional button to pick and press ( ) .

A

A

A

A

A

A

A A

A

A

A

A

A A

B

A A

B B

0 0 4

EDIT:select ESC OK

To replace a certain ID format shortcut, use directional buttons to pick one shortcut and press

[EDIT], follow step 2 and 3 to replace it.

“esc edit ok”

Note

Ʀ

Only internal ID formats can be selected as shortcuts.

18

HiTi P110S user manual

2. Template setting

S e t u p

Choose SETUP, and press

( ) to continue.

S e t u p

P R I N T E R S E T T I N G

Choose Printer Setting, and press ( ) to continue.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

Template setting: Allows users to select a region for the display of

ID format, browse, load, delete selected or delete all ID formats or eFrames.*

Users can set up either ID formats or eFrames according to the mode selected.

Te m p l a t e s e t t i n g

R e g i o n

B r o w s e

L o a d

D e l e t e s e l e c t e d

D e l e t e a l l

ESC

Function of 'Region':

Use directional button to select a region.

OK

* Region selection currently is only

available on the printer purchased

in North America and South America.

Only ID formats for North America and

South America are available now.

More ID formats will be provided in

the future.

*Selection in SETUP will be memorized

and applied to overall setting. You only

have to make the selection once unless

you want to change to other region.

Te m p l a t e s e t t i n g

R e g i o n

B r o w s e

L o a d

D e l e t e s e l e c t e d

D e l e t e a l l

ESC OK

Function of ‘Browse’:

Use directional button to select an template.

Te m p l a t e s e t t i n g

R e g i o n

B r o w s e

L o a d

D e l e t e s e l e c t e d

D e l e t e a l l

ESC OK

Function of ‘Load’: Load templates from image devices.

Te m p l a t e s e t t i n g

R e g i o n

B r o w s e

L o a d

D e l e t e s e l e c t e d

D e l e t e a l l

ESC OK

Function of ‘Delete selected’:

Delete selected templates.

Te m p l a t e s e t t i n g

R e g i o n

B r o w s e

L o a d

D e l e t e s e l e c t e d

D e l e t e a l l

ESC OK

Function of ‘Delete all’: Delete all loaded templates.

19

HiTi P110S user manual

3. Cleaning Mode

S e t u p

Choose SETUP, and press

( ) to continue.

S e t u p

P R I N T E R S E T T I N G

Choose Printer Setting, and press

( ) to continue.

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

Select Cleaning Mode and press ( ) to continue.

Note

Ʀ

Before the cleaning process begins, please remove the ribbon cartridge from the printer, and empty the

paper cassette.

Ʀ

Follow the instruction of cleaning kit to remove the protective covers on both sides of cleaning paper and

insert the cleaning paper properly. Press ( ) to start the cleaning job.

4. Printer Counter *

S e t u p C o u n t e r

P r i n t c o u n t : 0 1 7 4 9

S e t u p

Choose SETUP, and press

( ) to continue.

P R I N T E R S E T T I N G

Select Counter and press

( ) to continue.

ESC ERASE

Counter : It shows the number of print counts.

It allows users to erase the print counts if needed.

C o u n t e r

E r a s e ?

ESC ERASE

To erase the print count: press

( ).

P I N C o d e

C u r r e n t c o d e :

0 0 0 0

ESC OK

Key in the PIN code and press

( ).

C o u n t e r

P r i n t c o u n t : 0 0 0 0 0

ESC ERASE

Confirm the erase command, after deleting, print count will be reset to 0.

Note

Ʀ

The function of print count is designed for all photo applications.

20

5. PIN Code

S e t u p

Choose SETUP, and press

( ) to continue.

P I N C o d e

C u r r e n t c o d e :

0 0 0 0

ESC OK

To reset PIN code, the current code is required.

S e t u p

P R I N T E R S E T T I N G

Select PIN Code and press

( ) to continue.

HiTi P110S user manual

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

Users may reset PIN code or determine if PIN code is required when the printer reboots or when a user tries to apply printer setting.

P I N C o d e

N e w c o d e :

0 4 0 5

ESC

Enter the new PIN code

OK

A g a i n :

P I N C o d e

0 4 0 5

ESC OK

Confirm the new PIN code

A g a i n :

P I N C o d e

0 4 0 5

P I N c h a c g e d .

ESC OK

PIN code set notice: Confirms the new PIN code when a new

PIN code is set.

21

6. LCD Adjustment

S e t u p

HiTi P110S user manual

P r i n t e r S e t t i n g

R e s e t P I N C o d e

C o u n t e r

L C D a d j u s t m e n t

P r i n t p o s i t i o n

A b o u t

ESC OK

Choose LCD Adjustment and press ( ) to continue.

S e t u p

Choose SETUP, and press

( ) to continue.

P R I N T E R S E T T I N G

Select Printer Setting and press ( ) to continue.

Note

Ʀ

Press ( ) to leave and save custom settings, or select ( )

to restore default settings.

Brightness

Choose an item for LCD adjustment. Note that in LCD

adjustment, only the properties of Contrast, Brightness, Color

R/G, Color B/Y, Position, and

Default Setting can be adjusted.

7. Color Setting *

S e t u p

Choose SETUP, and press

( ) to continue.

001 002

S e t u p

P r i n t o u t s e t t i n g

Select Printout Setting and press

( ) to continue.

p r i n t o u t s e t t i n g c o l o r s e t t i n g

I 2 O b l a c k / w h i t e b o r d e r p r i n t d a t e p r i n t

ESC OK

Choose Color Setting and press

( ) to continue.

003

ESC

004

EDIT OK

Select a reference image saved in the memory card for color calibration, then press

( ) to continue.

Color R/G

Note that in color setting, only the properties of Contrast,

Brightness, Sharpness, Color

R/G and Color B/Y can be adjusted.

Note

Ʀ

Before accessing the function of color setting, please insert a memory card into the memory card slot.

Ʀ

Press ( ) to leave and save custom settings, or select ( ) to restore defult settings.

22

HiTi P110S user manual

8. Image adjustor & enhancer

001 002

003

ESC

004

EDIT OK

In the image navigator, select an image and press [EDIT] to adjust and enhance the selected image.

ESC OK

Select an image editing function and press ( ) to start editing.

Move

Function of ‘Move’: Use directional button to adjust the position of output image.

Contrast

Function of ‘Contrast’: Use directional button to adjust the contrast of output image.

Color R/G

Function of ‘Color R/G’: Use directional button to adjust the level of red or green.

Note

Ʀ

Press ( ) to leave and save custom settings, or select ( ) to restore default settings.

23

9. Power management*

S e t u p

P R I N T E R S E T T I N G

Select Printer Setting and press ( ) to continue.

HiTi P110S user manual

P r i n t e r S e t t i n g

M o d e s w i t c h

I D m o d e

Te m p l a t e s e t t i n g

P o w e r m a n a g e m e n t

L a n g u a g e

L i n k P r i n t

C l e a n i n g m o d e

Choose Power management and press ( ) to continue.

S e t u p

Choose SETUP, and press

( ) to continue.

P o w e r m a n a g e m e n t

L C D off

A u t o P o w e r off

ESC OK

Function of “LCD off”: Select

LCD off and press ( ) to continue.

L C D O ff

S i n c e P r i n t i n g

1 0 s e c o n d s

3 0 s e c o n d s

1 m i n u t e s

ESC OK

Function of “LCD off”: Use directional button to define the printer standby time. LCD turned

off automatically when the printer cease working for the time defined.

P o w e r m a n a g e m e n t

L C D off

A u t o P o w e r off

ESC OK

Function of “Auto power off”:

Select LCD off and press

( ) to continue.

A u t o p o w e r off

A l w a y s o n

1 m i n u t e

2 m i n u t e

5 m i n u t e

ESC OK

Function of “Auto power off’”

Use directional button to define the printer standby time.

Printer power off automatically when the printer cease working for the time defined.

Note

Ʀ

Power management is enabled only when the printer is powered by the (optional) battery pack.

Ʀ

When the printer turns off LCD automatically, users can press any button to wake it up; when the printer

turns off automatically, users can only press power switch to waken it up.

Ʀ

Default setting of power management is “LCD turn off automatically after cease operating for one minute,

and power off automatically after cease operating for three minute.”

24

6. PC-Link Printing *

Connect the PC and Printer

Install the Printer Driver

1 2

HiTi P110S user manual

3

Insert the Mater CD to run the installation.

4

Power on the printer to continue.

The PC is installing the printer driver.

Install the IDQuickDésirée

(Please see the user guide of IDQuickDésirée for detail.)

Installation completed.

Note

Ʀ

This user guide provides instructions on how to successfully install the printer driver on a PC.

For instructions on printing by a PC, please refer to the user guide of IDQuickDésirée for detail.

25

HiTi P110S user manual

Troubleshooting *

Indicator Status

Status Problem

Blinking x 1 Ribbon Missing

Troubleshooting

Reinstall the ribbon cartridge.

Blinking x 2,3 Unsupported Ribbon Install the proper ribbon cartridge.

Blinking x 3

Blinking x 4

Blinking x 5

Ribbon Out

Paper Out

Paper Jam

Replace the ribbon cartridge

Reinstall the photo papers and check consumables status.

Remove the jammed paper.

Note

Ʀ

If the problems are not listed above, please contact HiTi service center nearest to you.

Ʀ

Note that during printer operation, it is normal for the LCD controller to become warm to touch.

26

HiTi P110S user manual

Specification

HiTi P110S

Model

Spec

Print Method

Resolution

D i s p l a y

P ir n t S i z e

Paper Size

Ribbon Cartridge

Paper Cassette

Memory Card Slot

U S B H o s t

Compatible OS

File Format Support

Computer Interface

Power Supply

Operation Environment

Dimension (W x H x D)

W e i g h t

P110S

Dye Diffusion Thermal Transfer (D2T2)

300 x 300 dpi

2 .

5 i n c h T F T C o l o r L C D

4 x 6 i n c h ( 1 0 0 x 1 5 2 m m )

4 x 7 inch (100 x 178 mm)

60 prints

60 sheets

CF I / CF II / SD / SDHC / MS / MS Pro / Micro Drive

P T P / L i n k P ir n t / M a s s S t o r a g e D e v i c e s

Windows 2000 / XP / Mac OS X 10.2 or above / Vista

JPEG / TIFF

USB 1.1 / 2.0 Full speed

100 ~ 240V, 50/60Hz;

Temperature: 5°C ~ 40°C (41~104°F) / Humidity: 20 ~ 75% RH

250 x 100 x 185 mm (9.84 x 3.9 x7.3 inch)

2 .

2 k g ( 4 .

8 5 l b s ) ( e x c l u d i n g c o n s u m a b l e a n d b a tt e r y )

27

HiTi P110S user manual

Power adapter

Model

Spec

Input Voltage

Rated Output

Operation Environment

Dimension (W x H x D)

Weight

Compact AC Adapter

100v-240v, 50-60 Hz

DC 19.0 V / 2600 mAH

Temperature: 0°C ~ 40°C (32~104°F) / Humidity: 20 ~ 80% RH

134 x 58 x 32 mm (5.28 x 2.28 x1.26 inch)

Approx. 1 kg (2.20 lbs)

(Optional) P110S Li-ion Battery Pack

Model

Spec

Type

Nominal Voltage /

Capacity

Charge Cycles

P110S Li-ion Battery Pack

Lithium ion battery

DC 19.0 V / 2600 mAH

Approx. 250 times

Number of Prints

Operation Environment

Approx. 60 sheets (4 x 6 inch)

Temperature: 5°C ~ 40°C (41~104°F) / Humidity: 40 ~ 90% RH

Storage Environment*

Dimension (W x H x D)

Weight

Temperature: -20°C ~ 60°C (-4~139°F) / Humidity:

40 ~ 90% RH for 1 month storage

Temperature: -20°C ~ 45°C (-4~113°F) / Humidity:

40 ~ 90% RH for 1 month storage

Temperature: -20°C ~ 25°C (-4~77°F) / Humidity:

40 ~ 90% RH for 1 month storage

139.3 X 60.5 X 23 mm (5.48 x 2.38 x 0.9 inch)

290 g (0.64 lbs)

* The remaining capacity may vary according to the storage environment.

Note

Ʀ

Under HiTi internal test conditions.

Ʀ

The above data may vary according to the printing environment and the image to be printed.

28

HiTi P110S user manual

Customer Service Information

Online Support

For further inquires, please log on to HiTi Digital, Inc. website at www.hiti.com where users can download free updated drivers, applications, and latest e-templates.

Global Sites

Taiwan (Headquarters)

HiTi Digital, Inc.

9F, No.225, Sec. 3, Beixin Rd., Xindian Dist.,

New Taipei City 231, Taiwan

Tel: +886-2-2912-6268

Fax: +886-2-2912-6118 www.hiti.com

North America

HiTi Digital America, Inc.

727 Brea Canyon Rd. Suite#2 Walnut, CA 91789, USA

Tel: +1-909-594-0099

Fax: +1-909-598-0011 www.hiti.com/us

Europe Russia

HiTi Digital Europe B.V.

Ekkersrijt 1331, 5692 AJ Son, The Netherlands

Tel: +31 4.99.46.28.60

Fax: +31 4.99.46.12.99

www.hiti.com

Latin America

HiTi Digital Inc. (Mexico)

Agustín González de Cossio Str. #1 int. 202 Col. Del Valle,

C.P. 03100, Mexico City, D. F. Mexico

TEL: +52-55-50253671, +52-55-50253672

FAX: +52-55-11076206 www.hiti.com/latinamerica

Middle East Africa

HiTi Digital, Inc. MEA

No. 1608, Indigo Icon Tower, JLT, Dubai - U.A.E

Tel: +971-4-3674547

Fax: +971-4-3674221 www.hiti.com

29

Hiti Digital, Inc.

2011 Hiti Digital, Inc. All Rights Reserved.

PictBridge is a trademark. All other trade names and trademarks are properties of their respective owners.

Specifications are subject to change without prior notice.

P/N:39.P2500.E11