Steren STV-036 Instruction Manual
PDF
Download
Document
Advertisement
Advertisement
Soporte para pantalla LCD/LED de 25 a 45” STV-036 Gracias por la compra de este producto Steren. Este manual contiene todas las indicaciones necesarias para manejar su nuevo Soporte para pantalla LCD/LED de 25 a 45” . Por favor, revíselo completamente para estar seguro de cómo utilizar apropiadamente el producto. Para apoyo, compras y todo lo nuevo que tiene Steren, visite nuestro sitio web: www.steren.com La información que se muestra en este manual sirve únicamente como referencia sobre el producto. Debido a actualizaciones pueden existir diferencias. Por favor, consulte nuestra página web (www.steren.com) para obtener la versión más reciente del instructivo. 2 IMPORTANTE - Durante el montaje, utilice sólo las piezas suministradas y fije todas las piezas firmemente. - No olvide ninguna pieza durante el montaje. Instale todas las piezas tal como se indica. - No altere ni modifique ninguna pieza. - Hay que tener cuidado especial cuando se instala en una pared a causa de su peso. - Cuando instale el soporte en una pared de concreto, asegúrese de utilizar taquetes. - Cuando instale el soporte en una pared de madera tenga cuidado especial, ya que la unidad puede necesitar un soporte adicional para aguantar el peso de la pantalla. - Se recomienda que la instalación sea llevada a cabo por dos personas. - Elija una pared recta para poder fijar con seguridad la pantalla. - Coloque una cubierta de protección sobre la superficie en la que trabajará mientras manipula la pantalla y la unidad de soporte en pared. - Tras la instalación, compruebe que la unidad está firmemente fijada. - Durante la instalación, deje al menos 15 cm libres alrededor y quite los objetos que pueda haber en el espacio de la unidad. p CARACTERÍSTICAS El soporte de pared para pantallas de LED y LCD es resistente e ideal para cualquier pantalla entre 25 y 45”, con un peso no mayor a 40 kg. Puede moverlo o ajustar su posición original, ligeramente hacia arriba o abajo en un ángulo no mayor a 15° para una buena ubicación de su pantalla a cualquier altura, además, incluye todos los tornillos y herrajes necesarios para armar y fijar en la pared. Fabricado en lámina de acero al bajo carbón en color negro. Carga máxima: 40 kg Cumple estándar VESA Inclinación de 30° (15° hacia arriba y 15° hacia abajo) Para pantallas de LED y LCD 3 CONTENIDO 4 INSTALACIÓN DEL SOPORTE 1. Localice el lugar donde desea instalar la pantalla. 2. Coloque la placa de soporte en la pared y marque los lugares donde se van a realizar las perforaciones, de forma que la placa quede completamente fija. 3. Una vez que realizó las perforaciones, inserte los taquetes (C) en cada una de ellas. 4. Coloque la base del soporte en la pared, inserte los tornillos (D) en los orificios previamente realizados y apriete firmemente. 5 5. Coloque los seguros de las barras de movimiento en las barras de sujeción como se muestra en la figura, asegúrese de que el tornillo embone bien en la entrada cuadrada. Los seguros deben quedar en la parte exterior de las barras de sujeción de modo que pueda ajustarlos libremente. 6. Coloque las barras de sujeción sobre la parte trasera de su pantalla en los orificios correspondientes (para más información refiérase al manual de su pantalla). Utilice tornillos E, F, o G y las rondanas H e I. Los tornillos suministrados son de medidas estándar, le recomendamos referirse al manual de instrucciones de su pantalla para obtener información de los tornillos que son necesarios para el montaje en un soporte. A continuación se muestra un ejemplo de colocación. 6 7. Una vez que las barras están colocadas en la pantalla, engánchelas en la placa de soporte de la pared. Note que el gancho va en la parte superior. 8. Para asegurar los sujetadores a la pantalla coloque los dos tornillos sujetadores y apriete firmemente. AJUSTE DE ÁNGULOS DESPUÉS DE LA INSTALACIÓN 1. Una vez que instaló la pantalla y está firmemente sujeta, localice los seguros de las barras de movimiento. 2. Aflójelas ligeramente a fin de que la pantalla tenga movimiento. 3. Coloque la pantalla en el ángulo que desee. 4. Vuelva a apretar los seguros de las barras de movimiento. 7 Producto: Soporte para pantalla LCD/LED de 25 a 45” Modelo: STV-036 Marca: Steren PÓLIZA DE GARANTÍA Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra cualquier defecto de fabricación y funcionamiento, a partir de la fecha de entrega. CONDICIONES 1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V. 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor. 3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía. 4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente. ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS: 1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales. 2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso. 3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva. DATOS DEL DISTRIBUIDOR Nombre del Distribuidor __________________________ Domicilio ______________________________________ Producto ______________________________________ Marca ________________________________________ Modelo _______________________________________ Número de serie ________________________________ Fecha de entrega ________________________________ En caso de que su producto presente alguna falla, acuda al centro de distribución más cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto Steren. 8 Centro de Atención a Clientes 01 800 500 9000 ELECTRÓNICA STEREN S.A. DE C.V. Camarones 112, Obrero Popular, 02840, Del. Azcapotzalco, México, D.F. RFC: EST850628-K51 STEREN PRODUCTO EMPACADO S.A. DE C.V. Biólogo Maximino Martínez No. 3408 Int. 2, 3 y 4, San Salvador Xochimanca, Del. Azcapotzalco, México, D.F. 02870, RFC: SPE941215H43 ELECTRÓNICA STEREN DEL CENTRO, S.A. DE C.V. Rep. del Salvador 20 A y B, Centro, 06000, Del. Cuauhtémoc, México. D.F. RFC: ESC9610259N4 ELECTRÓNICA STEREN DE GUADALAJARA, S.A. López Cotilla No. 51, Centro, 44100, Guadalajara, Jal. RFC: ESG810511HT6 ELECTRÓNICA STEREN DE MONTERREY, S.A. Colón 130 Pte., Centro, 64000, Monterrey, N.L. RFC: ESM830202MF8 ELECTRÓNICA STEREN DE TIJUANA, S.A. de C.V. Calle 2a, Juárez 7636, Centro, 22000, Tijuana, B.C.N. RFC: EST980909NU5 25 to 45” LCD/LED TV stand STV-036 Thank You on purchasing your new Steren product. This manual includes all the feature operations and troubleshooting necessary to install and operate your new Steren´s 25 to 45” LCD/LED TV stand. Please review this manual thoroughly to ensure proper installation and operation of this product. For support, shopping, and everything new at Steren, visit our website: www.steren.com The instructions of this manual are for reference about the product. There may be differences due to updates. Please check our website (www.steren.com) to obtain the latest version of the instruction manual. 2 IMPORTANT -Only use the supplied pieces and fasten them tightly. -Do not forget to use all pieces. Install all pieces as shown on this manual. -Do not try to modify any piece. -Take care about the weight of the bracket while mounting in a wall. -If you mount the bracket in a concrete wall, make sure to use the supplied anchors. -If you mount the bracket in a wooden wall, it is possible that you need an additional support, in order to bear the weight of the TV. -At least two people are needed for installing the bracket. -Choose a flat wall, in order to fix the TV securely. -Place a cover protection over the working surface, while you manipulate the monitor and the wall bracket. -Make sure the wall bracket is securely fixed to the wall, after the installation. -Leave at least 15 cm around the unit, and remove all kind of objects. HIGHLIGHTS The LCD/LED TV stand is hardy and perfect to use with TVs between 25 and 45” and supports up to 99 lb. You can adjust the original position up to 15° angle. The package includes all required fittings for installation. Manufactured in low carbon steel finished in black colour. Maximum load: 99 lb VESA Angle of adjustment: 30° (15 up/15° down) For LED and LCD 3 CONTENT 4 BRACKET INSTALLATION 1. Locate the place where you want to install the screen. 2. Place the backplate on the wall and mark the places where you have to drill. 3. Once you made the holes, insert anchors (C) in each one. 4. Place the backplate on the wall, insert the screws (D) in the anchors and tighten firmly. 5 5. Place the movement bars knobs in the fastening bars as shown on the image; make sure the screw fits right into the square entry. The knobs must be place in the exterior part of the fastening bars, so you can adjust them without any trouble. 5. Place and secure the bars on screen’s back (check your screen’s manual for more information). Use screws E, F, or G and the washer H and I. The screws are standard size, we recommend refer to the instruction manual of your screen for more information the necessary screws for about the mounting. The next diagram is an example of placement. 6 6. When the screen is securely mounted in the fastening bars, hook it up to the bottom plate. Note the hook must be placed in the upper side of the plate. 7. Tighten the screws so that the bracket is properly fixed. ANGLE ADJUSTMENT AFTER INSTALLATION 1. Once the screen is installed and firmly attached, locate the knob on the movement bars. 2. Loosen them slightly so that the screen moves. 3. Adjust the screen at the desired angle. 4. Tight the knob. 7 Product: 25 to 45” LCD/LED TV stand Part number: STV-036 Brand: Steren WARRANTY This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase. CONDITIONS 1. This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty service is required. 2. If the product is in the warranty time, the company will repair it free of charge. 3. The repairing time will not exceed 30 natural days, from the day the claim was received. 4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later. THIS WARRANTY IS VOID IN THE NEXT CASES: If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others. a) The consumer can also claim the warranty service in the purchase establishment. b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket. 8 RETAILER INFORMATION Name of the retailer Address Product Brand Part number Serial number Date of delivery In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center. 01 800 500 9000 ">

Public link updated
The public link to your chat has been updated.
Advertisement