Ltech LT-3800-6A Manual
PDF
Download
Document
Advertisement
Advertisement
LT-3800-6A LED RGB Controller LT-3800-6A LED RGB Controller LT-3800-6A LED RGB Controller 3. Operation Keys: 3.1 Controller and Remote Instruction Status Display On/Off Loop Play 5 DIY Modes Buzzer On /Off Static State Color-mixing Button Mode (long press to increase or decrease continuously) Speed Brightness Power input : 5-24VDC R G B V LED Lamps Connected Socket Controller Panel Instruction LT-3800-6A is a multi-function RGB controller with DIY and powerful combination ability for changing RGB colors of the 4-pin 3-channels (common anode) LED lights. 29 modes can be controlled either by pressing the keys on the controller or the remote, which is simple and easy. LT-3800-6A with the programmable function. 10 seconds to produce a new lighting effect, super easy and useful. Mode Speed Brightness On/Off Static State Color-mixing Keys 5 Scene-save Key (long press for 2 second can save the current color or change mode) 1. Technical Specs: LT-3800-6A Constant Voltage Controller (long press can increase and decrease the color continuously) 5 Scene Loop Play Key Input Voltage: 5~24VDC RF Remote Distance: 30m Max Current Load: 6A×3CH Max 18A Working Temperature: -30℃~65℃ Max Output Power: 90W/216W/432W(5V/12V/24V) Dimension: L146×W90×H31(mm) Changing Mode: 29 Modes Package Size: L160×W130×H45(mm) Grey Scale Level: 4096×4096×4096 Weight(G.W.): 470g (merely cycle the dynamic effect, the static color will be skipped) Play Programmed Mode Color save key (press once to play press again to switch jumping/smooth/strobe) (long press 2s to save, short press to display) Remote Control Instruction 2. Product Size: ID Learning Method: Remote control has been matched to the controller before leave factory, if deleted accidentally, you can learn ID as follow. Learning ID: Press “ON” key on the controller for 2s, the buzzer long beep, press any key on the remote in 5s, the buzzer long beep again, activated. Cancelling ID: Press "OFF" key on the controller for 8s, the buzzer long beep, delete all the learned remote. One controller can be matched with max 10 remotes. 1 2 www.ltech-led.com LT-3800-6A LED RGB Controller LT-3800-6A LED RGB Controller 6. Attention: 3.2 Program Instruction: At least select 2 colors for editing the changing effect, Max. 7 color. If the edited color less than 6.1 The product shall be installed and serviced by the qualified person. 7 colors, so the last several colors stored as black. Editing the fade in and fade out effect, for 6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure. example, Red and Green fade in and fade out, the first color must be black, so the order of 7 colors is Black, Red, Black, Green, Black, Black, Black. When not programming, you can save your favorite colors on P1 - P7 for easy playing. 4. No. 1 Tables of Changing Modes: Effect Static Red No. 11 Effect No. 7 color strobe Effect 21 Green/Cyan color smooth 22 Blue/Purple color smooth 6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation. 6.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the product. 6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector. 6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights. 2 Static Green 12 Red fade out and fade in 3 Static Blue 13 Green fade out and fade in 23 4 Static Yellow 14 Blue fade out and fade in 24 Blue/Cyan color smooth 5 Static Purple 15 White fade out and fade in 25 Red/Purple color smooth 7. Warranty Agreement: 6 Static Cyan 16 RGB fade out and fade in 26 Blue/White color smooth 7.1 We provide lifelong technical assistance with this product: 7 Static White 17 Red/Green color smooth 27 Yellow/Purple/Cyan color smooth 8 RGB jumping 18 Red/Blue color smooth 28 RGB color smooth A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if cover manufacturing faults only. 9 7 color jumping 19 Green/Blue color smooth 29 7 color smooth For faults beyond the 5-year warranty, we reserve the right to charge for time and parts. 10 White strobe 20 Red/Yellow color smooth Green/Yellow color smooth 6.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself. 7.2 Warranty exclusions below: Any man-made damages caused from improper operation, or connecting to excess voltage and overloading. 5. Wiring Diagram: The product appears to have excessive physical damage. Damage due to natural disasters and force majeure. Warranty label, fragile label and unique barcode label have been damaged. The product has been replaced by a brand new product. 7.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty. 7.4 Any amendment or adjustment to this warranty must be approved in writing by our company only. ★This manual only applies to this model. We reserve the right to make changes without prior notice. 【Attn】: Power repeater can be added if connect to more LEDs, please refer to the manual of power repeater for the specific connection method. 3 www.ltech-led.com 4 Update Time: 2015.03.01 ">

Public link updated
The public link to your chat has been updated.
Advertisement