Below you will find brief information for Refrigerator-Freezer HC1001, Refrigerator-Freezer HC1050. These fully integrated combined refrigerator-freezers offer CFC/FC-free operation, energy-optimized refrigerant circuits, and automatic defrosting. They feature user-friendly electronic controls, adjustable shelves, large net capacities in both refrigerator and freezer compartments, and alarms for temperature increases and open doors. Enjoy convenient features for tall bottles and easy cleaning.
Advertisement
Advertisement
Fully integrated combined refrigerator-freezers
HC1001/HC1050
2606 7082 132-03
C ongratulations on your purchase. Choosing this appliance means you want all the benefits of state-of-the-art refrigeration technology, guaranteeing you top quality, a long appliance life span and excellent reliability.
Your fully integrated combined refrigerator-freezer provides an elegant addition to your kitchen. The appliance blends in with your cabinets because it is actually mounted inside of a kitchen cabinet! The doors and handles are identical to the other cabinets in your kitchen.
The features on your appliance have been designed to ensure maximum convenience - day in, day out.
This appliance has been manufactured with recyclable materials using an environmentally friendly process, so together we’re making an active contribution to the preservation of our environment.
To get to know all the benefits of your new appliance, please read the information contained in these operating instructions carefully.
We know you will be pleased with your new appliance.
●
CFC/FC-free
●
Energy-optimized refrigerant circuit
●
Energy-efficient insulation
●
User-friendly electronic controls
●
Temperature can be controlled within climate rating
● range, regardless of room temperature
Refrigerator and freezer compartments defrost automatically - no need to spend time defrosting
●
Big net-refrigerator capacity
●
Variable and practical features
●
Safety-glass storage shelves
●
Big net-freezer capacity
●
Shelves can be removed to make space for large items
●
Freezer temperature increase alarm
●
Audible door open alarm
●
Power failure/FrostControl display
●
Fresh food can be fast-frozen as required
●
Frozen food temperature display
●
Bright interior light
●
Practical door arrangement for tall bottles
●
Easy to clean
●
Door hinges can be reversed
●
Slider system for easy kitchen cabinet installation
HC 1001 / HC 1050
A delight in freshness
iv
A delight in freshness
v
HC 1001 / HC 1050
Figure 1
(1) Temperature Display and Setting Display
(2) Temperature Buttons
(3) Main ON/OFF Button
(4) SuperFrost Button with LED Showing Active Function
(5) Alarm Button
(6) Childproof Lock (refrigerator and freezer display)
(7) Temperature Display and Setting Display
(8) Temperature Buttons
(9) Refrigerator ON/OFF Button
(10) SuperCooling Button
(11) Fan with Rocker Switch
(12) Butter and Cheese Compartment
(14) Adjustable Storage Shelves
(15) Interior Light
(16) Vegetable, Salad and Fruit Bins
(17) Defrost Drain (refrigerator)
(18) Adjustable Bottle Holder
(19) Door Rack for Large Bottles and Drinks
(20) Model Plate
(21) Coldest Area of Refrigerator, Suitable for
Heat-Sensitive and Highly Perishable Foods
F
EATURES
(22) Re-circulated Air Slits
(23) IceMaker (some models)
(24) Removable Shelf to Make Space for Large
Items
(25) Drawers with Information System
(26) Ice Cube Tray (only in models without
IceMaker)
(27) Type Designation
(28) Service Number
(29) Appliance/Serial Number
HC 1001 / HC 1050
A delight in freshness
vi
I
MPORTANT
These instructions contain Warning and Caution statements. This information is important for safe and efficient installation and operation.
Always read and follow all Warning and Caution statements!
!
States a hazard will cause serious injury or death if precautions are not followed.
!
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
!
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
This highlights information that is especially relevant to a problem-free installation and operation.
Make sure incoming voltage is the same as the appliance rating.
To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction.
A delight in freshness
vii
HC 1001 / HC 1050
T
ABLE OF
C
ONTENTS
Page
Installation Guidelines ....................................................................................2
Area Requirements .....................................................................................2
Electrical Requirement ................................................................................2
Customer’s Responsibility ...........................................................................2
Venting the Appliance ..................................................................................2
Disposal of Old Appliance ...........................................................................3
Important Safety Information .......................................................................3
Electrical Safety ...........................................................................................4
Unpacking .........................................................................................................5
Disposal of Carton .......................................................................................5
Examining Loose Parts ...............................................................................5
Installation ........................................................................................................6
Kitchen Cabinet Construction ......................................................................6
Designing the Kitchen Cabinet Doors .........................................................9
Reversing Door Hinges .............................................................................10
Water Connection For IceMaker Models Only ..........................................11
Connection to the Water Supply ...............................................................11
Installing Into a Kitchen Cabinet ...............................................................13
Attaching the Kitchen Cabinet Doors ........................................................18
Operation ........................................................................................................19
Safety Regulations ....................................................................................19
Turning the Appliance ON and OFF .........................................................19
Setting the Temperature ............................................................................20
Childproof Lock ..........................................................................................20
Changing the Temperature Display ...........................................................21
Temperature Display ..................................................................................21
Display Brightness .....................................................................................21
Alarm .........................................................................................................22
Power Failure/FrostControl Display ...........................................................22
SuperCooling .............................................................................................23
Cooling with Fan ........................................................................................23
Refrigerator Compartment ............................................................................24
Arranging Food ..........................................................................................24
Shelf Arrangement .....................................................................................24
Interior Light ...............................................................................................25
Freezer Compartment ...................................................................................26
SuperFrost .................................................................................................26
Freezing and Storage ................................................................................26
Freezer Tray ...............................................................................................28
Information System ....................................................................................28
Making Ice Cubes ......................................................................................28
To Start the IceMaker ................................................................................29
To Clean the IceMaker ..............................................................................30
Notes on Defrosting ...................................................................................31
Cleaning .....................................................................................................31
Energy Saving Tips ...................................................................................31
Troubleshooting .............................................................................................32
Customer Service ..........................................................................................33
Appliance Information ...................................................................................33
NOTE
All types and models are subject to continuous improvement. The manufacturer reserves the right to make modifications in the shape, equipment and technology.
A delight in freshness
HC 1001 / HC 1050
1
I
NSTALLATION
G
UIDELINES
Verify the following:
• Floors can support refrigerator’s weight plus approximately 1200 pounds (544 kg) of food weight.
• Finish kitchen floor height is level. Kitchen cabinet that the appliance is installed in must be shimmed to the floor level if the floor heights are not equal.
• Remove anything attached to the rear or side walls of appliance that would prevent proper installation or impede proper ventillation.
• Cutout dimensions are accurate.
• Electrical outlet is in correct location.
Do not install this refrigerator-freezer next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side-by-side installation. They are equipped with a heating system to eliminate condensation when refrigerators or freezers are installed side-by-side.
Installing this refrigerator-freezer next to any other refrigerator or freezer can cause condensation or cause damage to the Liebherr refrigerator-freezer.
If codes require a separate grounding circuit to be used, have a qualified electrician install the circuit.
!
ELECTRICAL SHOCK HAZARD!
• Do not ground to a gas pipe. Check
with a qualified electrician if you
are not sure the appliance is properly
grounded. Do not have a fuse in the
neutral or grounding circuit.
• Failure to follow these instructions
could result in death or serious injury.
!
ELECTRICAL SHOCK HAZARD!
• Electrically ground refrigerator.
• Do not use an extension cord.
• Failure to follow these instructions
could result in fire, death or serious
injury.
!
ELECTROCUTION HAZARD!
Electrical Grounding Required. This appliance is equipped with a three-prong
(grounding) polarized plug for your protection against possible shock hazards.
• DO NOT remove the round grounding
prong from the plug.
• DO NOT use a two-prong grounding
adapter.
• DO NOT use an extension cord to
connect power to the unit.
• Failure to follow these instructions could
result in death or serious injury.
A 115 Volt, 60 Hz, 15 Amp fused electrical supply is required. We recommend using a dedicated circuit for this appliance to prevent electrical overload.
Follow the National Electrical Code and local codes and ordinances when installing the receptacle.
DO NOT restrict the air flow. Air flow must be provided for the appliance to operate. The factory air vents provide 31 square inches (200 cm2) of air flow per appliance. If you are replacing the factory air vents with an overlay, the air flow must be the same or greater than the factory air vents.
A delight in freshness
2
HC 1001 / HC 1050
I
NSTALLATION
G
UIDELINES
!
Be sure to follow your local requirements for disposal of appliances. Discarded appliances can be dangerous. To help prevent an accident:
●
Remove the door(s).
●
Cut off the power cable from the discarded appliance.
●
Cut off the prongs from the power cable plug and discard them.
●
Leave the shelves and drawers in place.
Following these instructions reduces the possibility of causing personal injury, especially to children playing.
Contact the trash collection agency in your area for additional information.
●
In the event of a power outage, minimize opening the appliance door(s). Protect the food either by placing dry ice on top of the packages or using a local frozen food locker if the power failure is of a long duration. Do not attempt to re-freeze any frozen food that has thawed out.
●
To avoid possible injury, only adjust an empty shelf. Do not attempt to adjust a shelf with food on it.
●
Wait 30 minutes to 1 hour after installation before you plug in the appliance. This allows the refrigerant and system lubrication to reach equilibrium.
!
ELECTRICAL SHOCK HAZARD!
• Start-up should only take place if the
appliance has been installed
according to these instructions.
• Failure to follow these instructions
could result in death or serious injury.
This appliance is intended for domestic use only.
Use the appliance only for its intended purpose, the storage of food products. Follow the cautions and safety warnings throughout this instruction manual including the following:
●
Do not allow children to play with the appliance.
Children must not climb, sit or stand on the shelves, drawers or door.
●
To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn off the circuit breaker before replacing the interior light or cleaning the appliance.
●
To prevent possible injury due to broken glass, use hand protection when replacing the interior light.
●
To prevent possible injury or damage to the appliance, do not use steam cleaning equipment to clean the appliance.
●
Do not operate the appliance in the presence of explosive fumes.
HC 1001 / HC 1050
A delight in freshness
3
I
NSTALLATION
G
UIDELINES
Connect this appliance to a 110-120 VAC, 15 amp circuit that is controlled by a circuit breaker or fuse.
In some communities, a wall switch is required to turn power to the appliance OFF and ON. This appliance should have its own separate grounded circuit. Do not use an extension cord.
The top of the electric outlet must be located within
82-5/8 in. (2100 mm)
(Figure 2) from the top of the base in the cabinet.
The power cord is equipped with a three-prong
(grounding) plug for your protection against possible shock hazards. To maintain this protection:
●
Do not modify the plug by removing the round grounding prong.
●
Do not use a two-prong adapter. Where a twoprong wall receptacle is encountered, contact a qualified electrician and have it replaced with a three-prong receptacle in accordance with all local codes and ordinances.
●
Do not use a power cord that is frayed or damaged.
Figure 2
A delight in freshness
4
KIKB001
HC 1001 / HC 1050
U
NPACKING
!
CAUTION
BACK INJURY HAZARD!
• To avoid risk of personal injury or property damage, have two people unpack and move this appliance into place.
• Failure to follow these instructions may result in minor or moderate injury.
Protect the finished floor surface before you uncrate the appliance.
!
SUFFOCATION HAZARD!
• Keep packaging materials away from children. Polythene sheets and bags can cause suffocation!
• Failure to follow these
instructions could result in death or serious injury.
- Figure 3
Make sure you received all installation and other loose parts. Note the vinyl trim may be taped to the front of the unit. If any parts are missing, contact your Liebherr dealer.
As soon as you uncrate the appliance:
●
Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage.
●
Note the type (model number), service number, appliance / serial number, date of purchase and where purchased on the spaces provided in the back of this manual.
The packaging is designed to protect the appliance and individual components during moving and is made of recyclable materials. Please take the packaging material to your local recycling facility.
●
Corrugated board/board
●
Molded polystyrene (foamed, CFC-free polystyrene)
●
Polythene bags and sheets
●
Polypropylene straps
1. Freezer Tray
2. Ice Cube Tray (only with appliances without
IceMaker)
Figure 3
HC 1001 / HC 1050
A delight in freshness
5
I
NSTALLATION
This is a fully integrated refrigerator-freezer which means that it is fully enclosed by a kitchen cabinet.
This type of cabinet must be carefully constructed using the proper dimensions
and it must provide
proper ventilation to ensure proper appliance operation.
1. The following ventilation dimensions must be observed:
●
There must be a ventilation space at least 31 in.
2 (200 cm 2 ) at the airflow inlet
(Fig. 4, 1) and at the airflow outlet (Fig. 4, 2).
●
There must be a clear ventilation space
(without any obstructions) of at least
1-1/2 in. (38 mm) at the back of the kitchen cabinet
(Figure 5).
●
The top ventilation space can be either directly over the appliance
(Fig. 4, 2) or next to the ceiling over a cabinet
(Fig. 4, 3), or through a vent installed in a soffit
(Fig. 4, 4).
2
3
1
4
Figure 4
A delight in freshness
6
Figure 5
HC 1001 / HC 1050
I
NSTALLATION
2. Ventilation through the cabinet base at the bottom can be achieved by installing the provided ventilation grille (Fig. 6, 3) or via a ventilation opening of at least 31 in.
2
(200 cm
2
).
When using the provided ventilation grille
(Fig. 6, 3), please proceed as follows:
●
In the cabinet base, cut out a ventilation opening that is 17-23/32 in. (450 mm) in width and 2-7/32 in. (56 mm) in height
(Figure 6).
●
Insert ventilation (Fig. 6, 3) grille into the cabinet base cut-out (Fig. 6, 1).
●
From the back side, slide the snap-fits
(Fig. 6, 2) into the grille until the hooks make contact with the cabinet base.
●
Completely mount cabinet base (with ventilation grille and snap-fits) to kitchen cabinet.
2
- Figure 7
Construct the kitchen cabinet using the dimensions shown in Figure 7.
1. Align the kitchen cabinet with a level (Fig. 7, 2) and a square. If necessary, shim underneath the cabinet to make it level. The floor and side walls must be at right angles to each other.
2. Install the refrigerator-freezer in stable kitchen cabinets only.
3. The joint between the upper and the lower kitchen cabinet door must align with the joint between the upper and lower refrigeratorfreezer door.
If you use a pre-designed kitchen cabinet, you may need to shim the refrigerator-freezer so the doors are properly aligned.
Follow the dimensions provided in Figure 7 to determine if any shims (Fig. 7, 4) are required.
Also make sure you adjust the height of the kitchen cabinet (Fig. 7, Dimension “D”) if you need to add any shims.
4. Use a fish line (Fig. 7, 1) to pull the plug up to reach the outlet (Fig. 7, 3).
4xR
7/32 in.
1 in.
Fi ure
3
Figure 6
HC 1001 / HC 1050
A delight in freshness
7
I
NSTALLATION
Figure 7
Make a separate kitchen cabinet for each appliance for Side by Side installations.
A. 21-7/32" (544 mm)
B. 69-5/8" (1772 mm)
C. 21-1/4" (540 mm)
D. 69-25/32" - 70-3/8" (1772 - 1788 mm)
E. 24" (609.6 mm) (American Style Cabinet)
23-5/8" (600 mm) (European Style Cabinet)
G. 21-21/32" (550 mm) minimum
H. 1-1/2". (38 mm) minimum
I. 26-13/16" (681 mm)
J. 15/16" (24 mm)
K. 39-27/32" (1012 mm)
L. 26-1/8" (664 mm)
M. 1/8" (3 mm)
N. 21-7/16" (544.5 mm)
(clearance needed between kitchen cabinet hinge projection and inside of left wall of kitchen cabinet)
Ventilation space at least 31 in.² (200 cm²) is required.
Fish line for power cord
Level
Electrical Outlet, The top of the electric outlet must be located within 82-5/8 in. (2100 mm) (Figure 2) from the top of the base in the cabinet.
Place shims under appliances as necessary
Upper cabinet spacer for 24 in. (610 mm) cabinet width
(dimension “E”) ONLY
Lower cabinet spacer for 24 in. (610 mm) cabinet width
(dimension “E”) ONLY
Kitchen Cabinet Hinge
A delight in freshness
8
HC 1001 / HC 1050
I
NSTALLATION
You need two doors for the kitchen cabinet, one on top for the refrigerator compartment, and one on the bottom for the freezer compartment. In general, the doors have these characteristics:
●
The doors should be at least 5/8 in. (16 mm) thick to allow the connecting rails to be fastened to them.
●
With both doors closed, there should be a minimum of 1/8 in. (3 mm) between the upper and lower doors. Also, there should be an 1/8 in.
(3 mm) clearance between the upper door and the
● cabinet door above it (if any).
The top edge of the upper door (Fig. 8, 1) and lower door
(Fig. 8, 2) should be even with the doors of adjoining cabinet(s), if any.
●
The position of the joint between the kitchen cabinet doors must be level with the position of the joint between the appliance doors
(Fig. 8, 2).
●
Adjust the door alignment
before installing the appliance. It is impossible to adjust the door with
● the appliance installed.
Check the installation dimensions according to
●
Figure 7.
Use high quality inside hinges (Fig. 9, 1) to mount the doors to the cabinet. The hinges should be adjustable to make sure the doors fit
● squarely when they are closed.
Make sure that you account for the projection
(thickness) of the hinge you select. You must have 21-7/16 in. (544.5 mm) clearance between left inner wall of the cabinet and the projection (thickness) of the hinge. See Figure 7
● dimension “N.”
The maximum hinge opening angle is 110°.
●
Consider having a professional install the refrigerator-freezer in your kitchen cabinet.
Figure 8
Figure 9
FIGURE8_01
HC 1001 / HC 1050
A delight in freshness
9
I
NSTALLATION
- Figure 10
Figure 10
The door hinges can be changed from one side to the other if desired.
1. Pull off the covers
(Fig. 10, 1) and (Fig. 10, 2).
2. Open bracket (Fig. 10, 15) and remove screws
(Fig. 10, 14). When installing into the kitchen cabinet, replace bracket on the opposite side using the same screws.
3. Using caution, press in the side of the hinge covers (Fig. 10, 3) with a tool and remove covers.
4. Unthread the outside screw (Fig. 10, 5) in the hinge, halfway. Remove the inside screw completely.
5. Open the top door slightly. Push the door and hinge (Fig. 10, 4) out and remove simultaneously.
6. Remove the hinge pin (Fig. 10, 7). Pull out the bottom door and remove.
7. Remove the plug (Fig. 10, 9).
8. Transfer the hinge pin
(Fig. 10, 8) to the other side.
9. Remove the bracket
(Fig. 10, 10) and cover
(Fig. 10, 13) by pressing the cover together, then tilt out the bottom. When installing into the kitchen cabinet, replace on the opposite side using the same screws.
10. Remove the center hinge screws (Fig. 10, 5).
Remove the center hinge (Fig. 10, 11). Rotate hinge 180° and install on the opposite side using the same screws. Thread the outside screw halfway in. Attach the hinge through the keyhole-shaped hole and slide in. Tighten both screws.
11. Place the bottom door on the hinge pin
(Fig. 10, 8). Close door and insert the center hinge pin (Fig. 10, 7) with the longer side down.
Be sure washers are in place.
12. Place the top door on pin (Fig. 10, 7) and close door.
13. Place the top hinge
(Fig. 10, 4) together with pin
(Fig. 10, 6) with the longer side up in the door mounting hole. Tilt the door away slightly and suspend the hinge on the screw
(Fig. 10, 5). Slide the door in and tighten both screws.
14. Check for proper alignment of all doors. Adjust if necessary.
A delight in freshness
10
HC 1001 / HC 1050
I
NSTALLATION
- Figure 11
!
ELECTRICAL SHOCK HAZARD!
• Disconnect the water supply before connecting the water lines for the
IceMaker. Make sure the refrigerator is not plugged in and there is no electric power going to the refrigerator.
• Failure to follow these instructions
could result in death or serious injury.
- Figures 12, 13
1. Install the shut-off valve, water filter and automatic shut-off device as required.
Note
The solenoid valve is located at the rear of your refrigerator-freezer.
2. Place a 1/4" OD copper tubing between the shut-off valve and solenoid valve. Make sure there is approximately 30" (70 cm) of excess tubing behind the unit for easy connection.
●
The water pressure must be between 21.8-87.0 psi (1.5-6 bar).
●
Use a 1/4 in. OD copper line to connect the water supply to the solenoid valve. This is not supplied with the refrigerator (Figure 11).
●
A shut-off valve, such as the saddle valve illustrated here, must be installed between the hose line and the main water supply so the water supply can be stopped if necessary.
Do not install the shut-off valve behind the refrigeration unit.
IMPORTANT
The solenoid valve has a Metric R3/4 male connection.
A R3/4(metric) to a 1/4" OD adapter and cable clip are supplied with the icemaker.
3. Remove the cover cap
(Fig. 13, 4) from the solenoid valve
(Fig. 13, 1). Install the brass adapter
(Fig. 13, 2) with sealing ring (Fig. 13, 6) on the solenoid valve
(Fig. 13, 1). Attach the copper tube to the brass adapter
(Fig. 13,
2). Secure the copper tube (Fig. 13, 3) to the appliance using the cable clip
(Fig. 13, 5).
4. Open the shut-off valve for the water supply and check the entire water system for leaks.
Before the appliance is used for the first time, a licensed plumber should bleed air from the system.
5. Insert the electrical plug for the appliance into the electrical outlet
(Figure 12).
6. Move the combined refrigerator-freezer into final position in the cabinet.
IM002
Figure 11
●
If you have hard water, we recommend you install a water softener. Also, a filter must be installed if the water contains solids such as
● sand.
All equipment and devices used to supply the water to the appliance must comply with the current regulations for your geographical area.
Figure 12
IM005
IM006
HC 1001 / HC 1050
A delight in freshness
11
I
NSTALLATION
4
1
5
A delight in freshness
12
5
3
2
6
1
Figure 13
HC 1001 / HC 1050
I
NSTALLATION
2. Gently pry open the top bracket cover
(Fig. 16, 1).
1
Figure 14
All attachment components are provided.
To protect the appliance from possible damage, allow the appliance to stand
30 minutes to 1 hour in place before turning the electricity on. This allows the refrigerant and system lubrication to reach equilibrium.
Figure 16
3. Position the power source cable so it can be easily connected once the appliance is installed. Use a piece of string to fish the cable
(Fig. 7, 1) if necessary.
1. Insert the equalizer trim (Fig. 15, 20) in the slot so it is flush on the handle side and on the edge of the appliance front. Secure to the appliance with collar screws (Fig. 15, 21).
HC 1001 / HC 1050
Figure 15
KIKB019
A delight in freshness
13
I
NSTALLATION
4.
If the kitchen cabinet is 24 in. (609.6 mm) wide (American Style Cabinet):
a) If the kitchen cabinet is 24 in. (609.6 mm) wide, one or two cabinet spacers, (Fig. 7, 5) and (Fig. 7, 6), are required. These cabinet spacers are supplied with the appliance.
b) If the upper cabinet spacer (Fig. 7, 5) does
not interfere with the top kitchen cabinet door hinge, install it in the location shown in
Figure 7 using the screws provided
(Fig. 17, 33). Make sure the front edge of the spacer is recessed 1/8 in. (3 mm) from the edge of the kitchen cabinet wall.The plastic hinge of the cabinet spacer should face the rear wall of the cabinet.
c)
All 24 in. (609.6 mm) wide cabinets require the lower cabinet spacer
(Fig. 7, 6). Install it in the location shown in
Figure 7 using the screws provided
(Fig. 17, 33). Make sure the front edge of the spacer is recessed 1/8 in. (3 mm) from the edge of the kitchen cabinet wall.The plastic hinge of the cabinet spacer should face the rear wall of the cabinet.
d) Close the cap(s).
2
3
Figure 17
5. Slide the appliance into the kitchen cabinet
(Figure 18):
• Make sure the handle side of the appliance is against the kitchen cabinet.
• Make sure the front of the bottom bracket and front of the bottom hinge
(Fig. 18, 1) are flush with the front edge of the kitchen cabinet.
• Align the front edge of the open top bracket
(Fig. 18, 2) so it is flush with the front edge of the kitchen cabinet. With the top bracket open, the distance between the front edge of the kitchen cabinet and the appliance housing must be 1-11/16 in. (43 mm).
• Verify the distance between the front edge of the kitchen cabinet and the appliance on the hinge side (Fig. 18, 3) is 1-11/16 in. (43 mm).
A delight in freshness
14
Figure 18
1
HC 1001 / HC 1050
6. Secure the appliance into the kitchen cabinet.
Note
DO NOT install screw (Fig. 19, 24 / 27) or hinge spacer
(Fig. 19, 23 / 26), at top appliance door hinge (Fig. 19, 18) if it interferes with kitchen cabinet door hinge.
a) Place the appropriate hinge spacer
(Fig. 19, 23 / 26) between the appliance door hinge (Fig. 19, 19) and the kitchen cabinet wall or cabinet spacer
(Fig. 19, 32):
• For 3/4 in. (19 mm) thick cabinet walls
– use small spacer (Fig. 19, 23).
• For 5/8 in. (16 mm) thick cabinet walls
– use large spacer (Fig. 19, 26).
b) Use the appropriate screws
(Fig. 19, 24 / 27) according to the thickness of the kitchen cabinet walls:
• For 3/4 in. (19 mm) thick cabinet walls
– use No. 5 x 75 mm screws (Fig. 19, 24).
• For 5/8 in. (16 mm) thick cabinet walls
– use No. 5 x 80 mm screws (Fig. 19, 27).
c) If you are using a cabinet spacer
(Fig. 19, 32) make sure the screws go through the cabinet spacer.
I
NSTALLATION
18 19
19
Figure 19
FIGURE 14_01
HC 1001 / HC 1050
A delight in freshness
15
I
NSTALLATION
7. Attach appliance to the floor of the kitchen cabinet by threading screws
(Fig. 20, 22)
through bottom brackets
(Fig. 20, 12).
8. Remove the center bracket cover
(Fig. 21, 13) and then the center bracket
(Fig. 21, 10).
12 22
Figure 20
KIKB012
Figure 21
A delight in freshness
16
HC 1001 / HC 1050
9. Cut sealing strip
(Fig. 22, 25) to the length of the recess on the handle side of appliance.
Press sealing strip into place between appliance and kitchen cabinet wall on handle side of appliance.
I
NSTALLATION
11. Install top bracket
(Fig. 24, 15) to kitchen cabinet using two screws (Fig. 24, 22).
Snap cover into place.
Figure 22
10. Reinstall middle bracket
(Fig. 23, 15) to appliance. Attach bracket to kitchen cabinet with a screw
(Fig. 23, 22). Snap cover into place.
Figure 24
12. Align the equalizer trim (Fig. 24, 20) so it is
parallel with the bottom edge of the top wall of the kitchen cabinet (it must not project beyond this edge).
HC 1001 / HC 1050
Figure 23
A delight in freshness
17
I
NSTALLATION
- Figures 25, 26
1. Attach at least one connecting element
(Fig. 25, 28) to each appliance door using the screws
(Fig. 25, 29) provided. Some large doors may need two connecting elements
(Fig. 25, 28) and connecting rails
(Fig. 25, 30).
a) Use the pre-drilled hole(s) in each appliance door to attach the connecting element(s)
(Fig. 25, 28) to the door of the appliance.
b) Make sure the connecting elements
(Fig. 25, 28) and connecting rails
(Fig. 25, 30) do not interfere with the kitchen cabinet door handles.
2. Open the kitchen cabinet door completely. a) Slide one connecting rail (Fig. 25, 30) into each connecting element (Fig. 25, 28).
b) Attach the connecting rails (Fig. 25, 30) to the kitchen cabinet doors using the screws (Fig. 25, 22) provided. i) Make sure the front edge of each connecting rail is recessed (dimension
“D” in Figure 25) from the edge of the kitchen cabinet door.
D = thickness of kitchen cabinet
wall + 1/8 in. (3 mm)
ii) Make sure the connecting rails
(Fig. 25, 30) are parallel to the bottom edge of the kitchen cabinet doors.
3. Adjust the connecting elements (Fig. 25, 28) so there is a 1/32 in. (1 mm) gap (Figure 26) between the door of the kitchen cabinet and the handle side of the kitchen cabinet wall when the door is closed.
D
MIN 1/32"
(1 mm)
Figure 25
Figure 26
KIKB016
4. Use an awl to open the remaining holes on the front edge of each appliance door. Insert plugs
(Fig. 25, 31) into each hole.
To protect the appliance from possible damage, allow the appliance to stand
30 minutes to 1 hour in place before turning the electricity on. This allows the refrigerant and system lubrication to reach equilibrium.
A delight in freshness
18
HC 1001 / HC 1050
O
PERATION
The appliance is designed to cool, freeze and store food and to make ice. It is designed as a household appliance. We cannot underwrite a warranty for any other use.
The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the model plate.
This is explained as follows:
Climate
Rating Set for Ambient Temperatures of
SN
SN-T
N
ST
T
50°F to 90°F (10°C to 32°C)
50°F to 109°F (10°C to 43°C)
61°F to 90°F (16°C to 32°C)
65°F to 100°F (18°C to 38°C)
65°F to 109°F (18°C to 43°C)
- The refrigerant circuit has been tested for leaks.
- The appliance complies with current safety regulations UL250 and CSA C22.2 #63.
We recommend cleaning the appliance before turning it on for the first time. See Cleaning.
Turn on the appliance approximately two hours before loading it with frozen food. Do not load the appliance with frozen food until the temperature shows at least 0°F (-18°C).
!
TIPOVER HAZARD!
• Do not allow children to play with the
appliance. Children must not climb,
sit or stand on the shelves, drawers
or door.
• Failure to follow these instructions
could result in death or serious injury.
- Figure 1
on or off.
Press the
ON/OFF Buttons (Fig. 1, 3 or 9) so that the temperature displays
(Fig. 1, 1) and (Fig. 1, 7)
light up, flash or display ( −−).
●
The refrigerator compartment is turned on when the temperature display (Fig. 1, 7) is on and the interior light is operational.
The
freezer compartment is turned on when the temperature display
(Fig. 1, 1)
is on. The alarm will sound when the appliance is turned on for the first time and when the appliance is warm. Press the
Alarm Button (Fig. 1, 5) to turn it off.
See
Alarm.
HC 1001 / HC 1050
A delight in freshness
19
O
PERATION
!
ELECTRICAL SHOCK HAZARD!
• To prevent possible injury due to an
electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light or cleaning the appliance.
• To avoid injury or damage, do not use
steam cleaning equipment to clean the appliance.
• Failure to follow these instructions
could result in death or serious injury.
2. When you press the temperature setting buttons for the first time, the most recent setting
(known as the “reference setting”) is displayed.
3. You can change the settings in increments of approximately 1°F or 1°C by briefly pressing the buttons again. If the buttons are held down the temperature setting will change faster.
4. Approximately five seconds after the button has been released, the display will automatically show the actual freezing or cooling temperature
(known as the “actual setting”).
5. You can change the temperatures:
●
In the refrigerator - between 36°F and 45°F
(2°C and 7°C) and
●
In the freezer - between 7°F and -15°F
(-14°C and -26°C).
Whether you can obtain the lowest temperature depends on where the appliance is positioned
(if it is located in an area with a high ambient temperature it may not reach the lowest temperature).
Turn off the entire appliance with the main ON/OFF
Button (Fig. 1, 3) so that the temperature displays
go out.
Note
If you only want to
switch off the refrigerator
compartment (keeping the freezer compartment switched on; useful when you go on vacation, for example), press the ON/OFF Button (Fig. 1, 9).
The refrigerator temperature display (Fig. 1, 7) and the interior light will go out. The freezer temperature display (Fig. 1, 1) must remain on.
- Figure 1
The childproof lock is designed to protect the appliance from being turned OFF accidentally.
1.
Turning ON: Hold down the Alarm Button
(Fig. 1, 5) and then press the SuperFrost
Button (Fig. 1, 4). Keep both buttons pressed simultaneously for approximately three seconds.
●
A double beep confirms your entry.
●
The
Childproof Lock Display (Fig. 1, 6) will come ON.
2. Turning OFF: Press this key combination again; the display (Fig. 1, 6) will now turn off.
- Figure 1
The appliance is pre-set for normal operation. We recommend temperatures of 41°F (5°C) in the refrigerator and 0°F (-18°C) in the freezer.
Press the
Down Refrigerator Temperature
Button; (Fig. 1, 8). or press the Down
Freezer Temperature Button; (Fig. 1, 2).
1. Press the
Up Refrigerator or Freezer
Button. While you are entering the temperature,
the set temperature will flash on the display.
A delight in freshness
20
HC 1001 / HC 1050
O
PERATION
The temperature reading can be displayed in either degrees Fahrenheit or degrees Celsius.
When the appliance is first turned on or after a power failure, the refrigerator Temperature Display and Setting Display (Fig. 1, 7) will show the set temperature display, either degrees Fahrenheit or degrees Celsius, for five seconds. Then, the actual temperature is displayed.
The display will “flash:”
●
If you change the temperature or
●
If the temperature rises by several degrees, indicating cold loss, e.g. if you place fresh,
“warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer. Once you have finished loading or repacking, the electronics will automatically reset the temperature to the most recent setting. Shortterm rises in temperature will not affect the frozen food.
If “F0” to “F5” appears in the display, the appliance has a fault. Have the fault number available when you contact the customer service department. See
Customer Service.
To change the temperature display:
1. First press and hold the
Alarm Button
(Fig. 1, 5) and then aditionally the Down
Refrigerator Temperature Button (Fig. 1, 8) for seven seconds. The set temperature display will blink six times.
2. While the temperature display is blinking, hold the
Alarm Button and use the Down
Refrigerator Temperature Button to change the temperature display.
3. After making the change, the new temperature display will blink six times. Then both temperature displays will show the actual temperature value.
- Figure 1
In normal operation, the following settings will be displayed:
●
The average refrigerator temperature in
●
display
(Fig. 1, 7)
The warmest frozen food temperature in
display
(Fig. 1, 1).
When starting up for the first time or when the appliance is warm, dashes will appear until the temperature reaches a level that can be displayed;
32°F to 60°F (0°C to 19°C) in the refrigerator and below 32°F (0°C) in the freezer.
It will take between three and eight hours for the required temperature, 0°F or 39°F (-18°C or 4°C), to be reached and displayed permanently in the display, depending on the ambient conditions and the temperature setting.
HC 1001 / HC 1050
A delight in freshness
21
- Figure 1
Your appliance is delivered with the display brightness set to low.
When the door is opened or the temperature settings are changed, the display automatically switches to bright for one minute, or as long as the alarm state lasts. You can change the brightness if required.
●
To make display brighter: Keep the Alarm
Button pressed while simultaneously pressing the
Up Freezer Temperature Button
(Fig. 1, 2).
●
To make display darker: Keep the Alarm
Button pressed while simultaneously pressing the Down Freezer Temperature Button
(Fig. 1, 2).
O
PERATION
- Figure 1
The alarm helps to protect frozen food and to save energy.
●
The audible warning device is turned
OFF by pressing the Alarm Button
(Fig. 1, 5).
●
It turns OFF automatically as soon as the temperature is low enough.
●
This sounds when the door has been left open for longer than about 60 seconds.
●
The sound switch-OFF function is active as long as the door is left open.
●
The alarm automatically switches back to standby when the door is shut.
●
It always sounds if the freezer temperature is not low enough (dependent on the temperature setting).
●
The temperature display flashes at the same time. This can be caused by:
- warm, fresh food being placed in the freezer,
- too much warm air from the outside entering when rearranging or removing frozen food.
The temperature display will continue to “flash” until the cause of the alarm has been rectified. It will then stop flashing and light up continually. The alarm is now automatically reset.
- Figure 1
If appears in the display, this means the freezer temperature has risen too
high during the last few hours or days due to a power failure.
Once the power is back on, the appliance will continue to operate at the most recent temperature setting.
●
If you press the Alarm Button (Fig. 1, 5) while the display is reading , the highest temperature registered during the power failure will be displayed.
●
Check the quality of the food in case it has become too warm or even defrosted.
●
The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear.
●
The in the display will disappear once the
Alarm Button is pressed again.
A delight in freshness
22
HC 1001 / HC 1050
O
PERATION
- Figure 1
The SuperCooling Button (Fig. 1, 10) switches the refrigerator compartment to maximum cooling. It is recommended particularly if you wish to cool large quantities of food, drinks, freshly baked goods or meals rapidly.
●
Turning ON: Press the SuperCooling Button
(Fig. 1, 10) briefly so it lights up. The refrigerator temperature will drop to its lowest value (dependent on the room temperature).
Note
The SuperCooling function uses slightly more energy. After approximately six hours, however, the refrigerator switches back automatically to normal energy-saving operation. If required, the SuperCooling function can be turned OFF sooner.
●
Turning OFF: Press the SuperCooling Button
(Fig. 1, 10) again until it goes out.
- Figure 1
Cooling with the fan generates relatively even temperatures on all of the shelves.
All food will be chilled to the same relevant temperature, which you can select. The forced air circulation ensures that the temperature is relatively the same in all areas of the refrigerator.
As a rule this is recommended:
●
in high room temperatures, approximately 95°F
(35°C) or higher and
●
if the air humidity is high, e.g. during the summer.
Turning ON/OFF: Press fan switch (Fig. 1, 11).
= ON, 0 = OFF.
●
Note
The energy consumption will increase when
the fan is turned ON.
●
To save energy, the fan will turn OFF
automatically when the door is open.
HC 1001 / HC 1050
A delight in freshness
23
R
EFRIGERATOR
C
OMPARTMENT
- Figure 27
When the fan is off, the natural circulation of air in the refrigerator compartment results in different temperatures in different parts of the refrigerator.
The refrigerator is coldest just above the vegetable bins and near the rear wall (best for sausage and meat products); it is warmest at the front, at the top and in the door (best for spreadable butter, cheese, etc.).
Do not put food against the rear wall; the food could freeze.
●
Notes
Store food so air can circulate properly
around it. Do not pack the refrigerator too full.
●
Liquids and food which give off or absorb
odors and flavors should always be stored covered or in closed containers.
●
Always store food which gives off or is
sensitive to ethylene gases such as fruit, vegetables and salads separately or wrapped in order not to affect their storage life. For example, do not store tomatoes together with kiwis or cabbage.
!
CAUTION
LACERATION HAZARD!
• To avoid possible injury, only adjust
an empty shelf. Do not attempt to
adjust a shelf with food on it.
• Failure to follow these instructions
may result in minor or moderate injury.
(1) butter, cheese
(2) eggs
(3) cans, drinks, bottles
(4) preserves
(5) dairy products, baked goods, drinks
(6) raw meat, cold meats, fish, pre-cooked meals
(7) fruit, vegetables, salad
Figure 27
You can rearrange the height of the shelves and door racks as required.
- Figure 28
Empty the door rack, slide the door rack up, pull out toward you and replace in reverse order.
2
1
2
You can protect the bottles from falling over when the door is opened and closed.
Always hold by the plastic handle.
Figure 28
1
A delight in freshness
24
HC 1001 / HC 1050
R
EFRIGERATOR
C
OMPARTMENT
- Figure 29
●
Empty the shelf, lift the shelf, slide forward and remove.
Always insert shelves with the raised edge at the back pointing up, otherwise food may freeze onto the rear wall.
3
2
1
●
The glass shelves are
Figure 29
fitted with stops to prevent them from being pulled out accidentally.
- Figure 30
Lift the front half of the split glass shelf and carefully slide it under the back half until the stops click into the recesses.
1 2
2
1
1
2
This turns OFF automatically after the door has been opened for approximately 15 minutes. If it does not turn ON when the door is opened briefly, but the temperature display is working, the bulb may be defective.
Figure 30
!
ELECTRICAL SHOCK HAZARD!
• To prevent possible injury due to an
electrical shock, be sure to
disconnect the power cord or turn
OFF the circuit breaker before
replacing the interior light or cleaning
the appliance.
• Failure to follow these instructions
could result in death or serious injury.
!
CAUTION
LACERATION HAZARD!
• To prevent possible injury due to
broken glass, use hand protection
when replacing the interior light.
• Failure to follow these instructions
may result in minor or moderate injury.
1.
Bulb data: Only use bulbs of the same size and 25 W maximum. Current and voltage must agree with the details on the model plate.
2. Press the light cover together at the sides
(Fig. 31, 1). Lift it out and unclip at back
(Fig. 31, 2).
3. Replace the bulb
(Figure 32).
4. Clip the back end of the cover in and clip the sides into place.
Figure 31
Figure 32
HC 1001 / HC 1050
A delight in freshness
25
F
REEZER
C
OMPARTMENT
- Figure 1
Fresh food should be frozen completely and as rapidly as possible. Frozen food can also be given a cold boost. This is provided by the SuperFrost feature and ensures that the nutritional value, appearance and flavor of the food remain intact.
●
The maximum amount of food which can be frozen in 24 hours is shown on the model plate
(“Freezing capacity ... kg/24h”), (Fig. 1, 30).
This amount varies according to the model and climate rating.
- Figure 1
Press the SuperFrost Button (Fig. 1, 4) briefly so it lights up. The freezer temperature will decrease and the appliance will change to the lowest temperature.
For small amounts of frozen food, it is normally sufficient to turn ON SuperFrost six hours beforehand. For the maximum amount (see freezing capacity on the model plate) you will need to turn it ON
24 hours before.
●
Then place the fresh food inside the freezer, preferably in the top drawers.
If freezing the maximum quantity of food, do not use the drawers. Place the wrapped food directly on the shelves. Once the food is frozen, load it into the drawers.
●
The SuperFrost function turns OFF automatically. Depending on the quantity of food placed in the freezer, this will normally be between 30 hours and a maximum of 65 hours.
The freezing process is now complete, the
SuperFrost LED will go out and the freezer will switch back to normal energy-saving operation.
Note
You do not have to turn ON the SuperFrost
●
function:
When placing frozen food in the freezer.
●
When freezing up to approximately 4-1/2 lbs
(2 kg) fresh food daily.
Lettuce, radishes, grapes, whole apples, pears and fatty meat.
Meat, game, poultry, fresh fish, vegetables, fruit, dairy products, bread, baked goods, pre-cooked meals.
●
Pack frozen food in standard freezer bags or reusable plastic, metal or aluminum containers.
●
Do not allow fresh food which is to be frozen to come into contact with food already frozen.
Always keep packages dry in order to avoid them sticking together.
●
Always write the date and contents on the package and do not exceed the stated storage time for the food. This prevents spoiling.
●
Pack food which you are freezing yourself in quantities right for your household. To ensure the food freezes completely and quickly, the following quantities should not be exceeded per package:
- fruit, vegetables: up to 2-1/4 lbs (1 kg);
- meat: up to 5-1/2 lbs (2.5 kg).
●
Blanch
vegetables after washing and cutting them. (Add to boiling water for 2-3 minutes, remove and quickly cool down in cold water. If you blanch with a steamer or microwave oven, please follow the operating instructions.)
●
Do not salt or season fresh food or blanched vegetables before freezing. Only lightly salt and season other food. Some spices can alter their flavor intensity.
●
Do not freeze bottles and cans as they might burst. Drinks can be cooled down quickly, but take the bottles or cans out of the freezer compartment after an hour at the most.
A delight in freshness
26
HC 1001 / HC 1050
F
REEZER
C
OMPARTMENT
Each drawer and shelf can take up to 55 lbs
(25 kg) frozen food. By removing the 2nd and 3rd drawers and the shelf you can create a doubleheight space for large frozen food items. This enables you to freeze such things as poultry, large pieces of meat or large cakes without first having to cut them up, so they can be served “whole” afterwards.
If you want to use the maximum net-capacity, you can remove the drawers and store items directly on the shelves.
●
Always leave the bottom drawer in the appliance.
●
If you have removed the top drawer, do not cover the fan slits at the back, otherwise the freezer will not work properly.
- Figure 33 and 34
!
CAUTION
LACERATION HAZARD!
• To avoid possible injury, only adjust
an empty shelf. Do not attempt to
adjust a shelf with food on it.
• Failure to follow these instructions
may result in minor or moderate injury.
●
Removing the shelf (Figure 34): Remove the
2nd and 3rd drawers. Lift the front edge of the shelf up and pull it out.
To insert: simply slide shelf in and allow the front edge to click into place.
●
Always store identical food items together to avoid the door being open for unnecessarily long periods and to save energy.
●
Do not exceed storage times given.
!
POISONING HAZARD!
• Do not attempt to re-freeze any
thawed, previously frozen food.
• Failure to follow these instructions
could result in death or serious injury.
Only take out as much food as is needed for thawing. Cook food which has been thawed as quickly as possible. Frozen food can be thawed in the following ways:
●
in a microwave oven
●
in the refrigerator: the safer way to thaw food because there is less chance of bacteria growth and it saves energy. Use this method for high density food such as roasts or poultry.
●
Flat portions of meat or fish can be cooked when partially thawed.
●
Vegetables can be cooked from frozen
(in half the normal time).
Figure 33 Figure 34
●
Removing drawers (Figure 33): Pull forward until the drawer stops and lift out.
HC 1001 / HC 1050
A delight in freshness
27
F
REEZER
C
OMPARTMENT
- Figure 35
The freezer tray is used for gently freezing berries, herbs, vegetables and other small items and prevents them from sticking together. Items being frozen will largely retain their shape, and it will be easier to remove exactly the right quantity later on.
●
Spread the items out loosely on the tray.
●
Suspend the freezer tray in one of the top drawers. Freeze for 10 to 12 hours, then transfer to a freezer bag or container and put in a drawer.
●
To defrost, spread the frozen items out loosely.
pre-cooked meals ice-cream fish pork vegetables fruit
- Figure 37
Use frozen food within the recommended period.
The numbers between the symbols indicate the storage period in months for different kinds of frozen foods. Storage times given are guidelines for food frozen at home. Whether or not the lower or upper value is applicable depends on the food quality and how it was processed prior to freezing.
The lower values always apply to food with a high fat content.
sausages bread mushrooms game poultry beef/veal
2 - 6
4 - 8
6 -12
Figure 37
- Figure 38
Figure 35
Appliances without IceMaker
1. Fill the ice cube tray with water.
2. Place the ice cube tray in the appliance and leave it to freeze.
3. Remove the ice cubes from the tray by twisting the tray or holding it upside down for a short time under running water.
Figure 38
A delight in freshness
28
HC 1001 / HC 1050
F
REEZER
C
OMPARTMENT
- Figure 39
The IceMaker will only work if the combined refrigerator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating and if the minimum freezer temperature is 14°F (-10°C).
The IceMaker is in the top left drawer in the freezer compartment of the combined refrigerator-freezer.
You can identify this drawer by its labeling “IceMaker.”
●
Pull out the drawer.
●
Press the “ON/OFF” button so the control lamp comes on
(Figure 39).
●
Close the drawer.
Note
The IceMaker can only make ice cubes if the
drawer is completely closed.
Figure 39
If you do not need any ice cubes, the IceMaker can be turned off independently of the freezer compartment.
●
Press the “ON/OFF” button for approximately
1 second so the control lamp goes out.
Note
If the IceMaker is turned off, the empty drawer can also be used to freeze and store food.
After you start the icemaker for the first time it may take up to 24 hours before the first ice cubes are ready.
Note
The first three batches of ice must not be consumed or used. This will help ensure that the water supply lines are free of contaminants.
The production capacity depends on the temperature inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time.
The ice cubes fall out of the icemaker into the drawer.When the ice reaches a certain level in the drawer, the appliance stops producing ice automatically.
If you need a large quantity of ice you can change out the drawer to the right with the complete “Ice-
Maker” drawer. When you close the drawer the icemaker will immediately start production.
HC 1001 / HC 1050
A delight in freshness
29
F
REEZER
C
OMPARTMENT
- Figure 40
The IceMaker (arrow in Figure 40) can be cleaned by using this procedure.
1. Pull out the drawer and remove the ice.
2. Clean the drawer with warm water and mild dish detergent.
3. To access the IceMaker for cleaning: a. With the drawer pulled out, press and hold the “ON/OFF” button until the LED goes out
(takes about 1 second).
b. Continue to hold the button and after 10 seconds the LED will start to flash.
c. Insert the drawer while the LED is flashing
The IceMaker should rotate down into the cleaning position.
d. Remove the drawer.
4. Clean the IceMaker with warm water. If you need to use a cleaning aid, use a mild dish detergent and rinse.
You will need to throw out the first three batches of ice if you use any soap.
5. Push the “ON/OFF” button until the LED lights and insert the drawer.
6.
Throw out the first three batches of ice to remove any soap residue.
Note
If you need to leave the IceMaker off, clean the
IceMaker but do not push the “ON/OFF” button in
Step 5.
Figure 40
A delight in freshness
30
HC 1001 / HC 1050
D
EFROSTING
/C
LEANING
The NoFrost system automatically defrosts the appliance.
The water that forms on the rear wall drains into an evaporation container at the back of the appliance and evaporates automatically through the compressor heat. Drops of water, or frozen drops of water, on the rear wall are perfectly normal.
Ensure that the defrost water can flow freely through the defrost drain hole
(Fig. 1, 17) in the rear wall
(arrow in Fig. 1).
Any moisture arising collects on the evaporator and freezes, and is periodically defrosted and evaporated.
The automatic defrosting system keeps the freezer frost-free and eliminates the time and effort spent on defrosting manually.
!
ELECTRICAL SHOCK HAZARD!
●
To prevent possible injury due to an
electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light or cleaning the appliance.
●
To avoid injury or damage, do not use
steam cleaning equipment to clean the appliance.
●
Failure to follow these instructions
could result in death or serious injury.
Clean the inside and equipment by hand with lukewarm water and a little detergent.
DO NOT use abrasive or scouring sponges. Do not use concentrated cleaning agents and never use abrasive or acid cleaners or chemical solvents.
●
We recommend using a soft cloth and an allpurpose cleaner with a neutral pH value. Only use food compatible cleaning and care agents on the inside of the appliance.
●
We recommend treating stainless steel appliances with a special stainless steel cleaning agent after normal cleaning.
●
Do not allow cleaning water to run down the drain gully or to penetrate the ventilation grilles or electrical components. Dry the appliance.
●
Do not damage or remove the model plate on the inside of the appliance
(Fig. 1A). It is very important for servicing purposes.
●
The butter dish can be washed in a dishwasher. The racks, shelves and other components should be cleaned by hand.
●
The shelves and door racks can be dismantled for cleaning (Figure 41).
●
Remove the trim and sides from the glass shelves.
Figure 41
●
Remove all protective film from the decorative trim.
●
Clean the drain hole
(Fig. 1, 17) in the rear wall
(arrow in Fig. 1) frequently. If necessary, clean with a thin object such as a cotton swab.
●
Then connect and turn ON the appliance and wait until the temperature reaches the set value before adding food. See
Turning the Appliance
ON and OFF.
If the appliance is to be
left turned OFF for any
length of time, empty the appliance, disconnect from the power source, clean as described above and leave the door open so as to avoid odors.
●
Ensure there is adequate space around the appliance for ventilation and air extraction.
●
Avoid keeping the door open for too long.
●
Store food logically. Do not exceed the storage period specified.
●
Make sure to allow hot food to cool to room temperature before placing in the appliance.
●
Keep the appliance door shut in the event of a breakdown. This will delay the cold loss and will help to maintain the quality of the frozen food longer.
HC 1001 / HC 1050
A delight in freshness
31
T
ROUBLESHOOTING
Your appliance is designed and manufactured for a long life and reliable operation.
If a problem occurs during operation, check whether it is due to an operating error. Please note that even during the warranty period, some repair costs may be your responsibility.
You may be able to correct the following faults by checking the possible causes yourself:
Problem Possible Cause and Remedy
Appliance does not work, display is OFF
The interior light does not come ON
Loud running noise
The compressor continues to run for a long time
- The alarm sounds,
- the temperature is not cold enough
- Is the appliance turned ON properly?
- Is the power source plug properly inserted in the socket?
- Is the circuit breaker or fuse in operating condition?
- Is the refrigerator compartment turned ON?
- Has the door been open for more than 15 minutes?
- The bulb is defective. Change the bulb as described in
Interior light.
- Is the appliance standing firmly on the floor, or does the compressor
cause nearby items of furniture or objects to vibrate? If necessary, move
bottles and containers apart.
-
Bubbling noises are normal. These are caused by the refrigerant
flowing around the refrigerant circuit.
- A short
clicking sound: This will be heard whenever the compressor
turns ON or OFF automatically.
-
Motor noise: This will be slightly louder for a brief period when the
compressor turns ON. The refrigerating capacity will increase when
the SuperFrost function is activated, fresh food has just been placed in
the appliance or the door has been left open for a while. A low-pitched humming sound is caused by
air flow noises in the fan.
On energy saving models, this is perfectly normal. When less refrigeration is required, the VCC compressor switches to a low speed. It will run almost constantly, but it still saves energy.
- Have you put too much fresh food into the freezer
without activating
SuperFrost? See
SuperFrost.
- Does the door close properly?
- Is the appliance sufficiently ventilated? Clean ventilation grilles if
necessary.
- Is the ambient temperature too hot? See
Safety Regulations.
- Has the appliance been opened too often or left open too long?
- If applicable, wait until the appliance reaches the required temperature itself.
appears in the display
There has been a power failure; proceed as described in
Failure/FrostControl Display.
Power
IceMaker is not making any ice.
- Is the IceMaker turned on?
- Is the water supply line open?
- Is the IceMaker drawer closed properly?
A delight in freshness
32
HC 1001 / HC 1050
- Figure 1
If your refrigerator is not working properly, or if the temperature display reads “F0” to “F5”, this means there is a fault. Please contact your nearest customer service department.
Give the fault number displayed, together with the
• Type Designation (Fig. 1, 27),
• Service Number (Fig. 1, 28) and
• Appliance / Serial Number (Fig. 1, 29)
as given on the model plate, to ensure prompt, accurate servicing. The model plate is located inside the appliance on the left-hand side.
Leave the appliance closed until the customer service engineer arrives to prevent any further cold loss.
Record this information when the appliance is installed.
Type Designation: _________________________
Service Number: __________________________
Appliance / Serial Number: __________________
Date of Purchase: _________________________
Where Purchased: _________________________
15545 N. 77th Street
Scottsdale, AZ 85260
Phone: (480) 998-0141
Fax: (480) 998-7877
Toll Free:
or
E-mail: [email protected]
2150 Winston Park Drive - Unit 20
Oakville, Ontario, L6H 5V1
Phone: (905) 829-3980
Fax: (905) 829-3985
Toll Free:
HC 1001 / HC 1050
A delight in freshness
33
FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.
FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The “Sealed System” means only the compressor, condenser, evaporator, drier and all connecting tubing.
LIMITED 6TH THROUGH 12TH YEAR WARRANTY - From the 6th through 12th year from the date of original purchase, your Liebherr warranty covers all parts that prove to be defective in materials or workmanship in the Sealed System (parts only).
TERMS APPLICABLE TO EACH WARRANTY
All service provided by Liebherr under the warranty must be performed by authorized Liebherr service representatives, unless otherwise specified by Liebherr. Service will be provided in the home during normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available on request.
The warranty applies only to products installed in Canada and any one of the fifty states of the United
States or the District of Columbia. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation of the condensing unit.
The remedies described above for each warranty are the only ones which Liebherr will provide, either under these warranties or under any warranty arising by operation of law. Liebherr will not be responsible for any consequential or incidental damages arising from the breach of these warranties or any other warranties, whether express, implied or statutory.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
To receive parts and/or service and the name of the Liebherr authorized service representative nearest you, contact your Liebherr dealer or distributor or contact the Liebherr designated national service provider:
US: [email protected], or call 1-866-LIEBHERR or 1-866-543-2437
Canada: www.euro-parts.ca, or call 1-888-LIEBHERR or 1-888-543-2437.
A delight in freshness
34
HC 1001 / HC 1050
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Fully integrated
CFC/FC-free refrigerant
Energy-optimized refrigerant circuit
Energy-efficient insulation
User-friendly electronic controls
Automatic defrost
Large capacity
Safety-glass shelves
Door arrangement for tall bottles
Adjustable shelves
Press the main ON/OFF button to turn the entire appliance on or off. The temperature displays will light up, flash or display (−−).
Use the temperature setting buttons to adjust the temperature in increments of approximately 1°F or 1°C. The set temperature will flash on the display. After a few seconds, the display will show the actual temperature.
Remove the covers, unscrew the hinge, and remove the hinge pin. Transfer the pin to the other side and reassemble the hinge.
You can install this refrigerator-freezer next to another Liebherr model, as they are designed to allow side-by-side installation. However, installing it next to any other brand of refrigerator or freezer can cause condensation or damage to the appliance.
The climate rating is indicated on the model plate. It specifies the ambient temperature range in which the appliance is designed to operate.
How to perform a factory reset on the Liebherr HC 1001 10B?
The document does not contain information on how to perform a factory reset on Liebherr HC 1001 10B. The manual provides instructions on installation, operation, safety, cleaning, troubleshooting, and customer service, but it does not include specific instructions for resetting the device to its factory settings.
Login to continue