null  null
A a TEL Ta
"и
Model T300
Digital Tuning Clock Radio
with Nature Sounds
NATURE se =
= SOUNDS
BROOK FOREST
MEMORY
BET
SLEEP
VOLUME
"еее PRO m=
RISK OF [ee SHOCK.
e DO NOT OPEN Le
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This symbol is intended to alert the user of the
presence of uninsulated dangerous voltage wifhin
the product's enclosure that may be of sufficient
magnitude fo constitute a risk of electric shock.
This symbol is intended fo alert the user fo The
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
These symbols are located at the bottom of the cabinet.
CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH WIDE BLADE
OF PLUG TO WIDE SLOT. FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES.
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.
1
- Table of Contents
A Consumer Guide to Product Safety ......... naruainarararinercerrantarener cararerarnartreEnarenareenarranratvarerEaarEaraterrereces 3-5
FCC Information | | |
Preparation for Use .................. MininaceremecereavaccarravarrarrerenerareFONENarrRCN TaracraCrrrarareENCNe FUER reneracr rece rerere rear ra 6-7
Maintenance
Battery Backup Installation
Battery Backup System
Controls and LCD Indicators .....................eeíeeere harevan enano cconrarEraVONC Ear TaRO RELE MANTE NCEaNEEa ‚8-9
Setting the Clock Time and Calendar ...................... III RIIIE ACA Area eee 10
ES CT gg Ce Jo J a LI = Ts [a TP 11
Antenna Information
Manual Tuning
Auto Tuning
Last Station Memory
Preset Station Memories .................:.....e..e.ecernaiierrrein rr RI NN RI RR Cr e cereneetranearerererTEaerrararererarres 12
Recalling Preset Stations Memories cc. eb Eme. 12
Changing Preset Stations
Listening to Nature SoUNdS ..............o m-ieeeree ee Re E rene anrren en enErrerrarenmenrerrENErTUTOs 13
Setting the Radio Alarm Time …...…...............….....versesserrasarasaarrra sea arras ss marre ares ea terra sara recense ace nca ne cas 13
Setting the Nature Sounds Alarm TIM® ….…..…...…...…......…....….…rsrsrsrenrerirnrnarrena rame saran area ri ae name nana ans Anar ana aa0 14
Setting the Buzzer Alarm Time ….….…...……..…...….....…......…ceccrrerrerrenrenre savane se see casa a cena ee seen senc nee eme. 14
Check Your Wake-Up Settings er earners 05
Wake to Radio, Sounds, and/or Buzzer ...…..........................ecccseecenece ce e Renee nene enero 15
Snooze and Back Light Operation .....................e eme RR RI RI RR NI e Carrer rrneeErarENerrArrOS 16
Sleep to Radio, Sounds, or Buzzer ....................-.e.-e eee narnia cape erare eme n ee eee nana ra area era 16
Warranty EEE 17
A Consumer Guide to Product Safety
This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential
electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use.
Keep these instructions handy for future reference. Take special note, adhere to all warnings, and always follow the
instructions on the unit and in the instruction and service manuals.
1.
2.
Water and Moisture - The unit should not be used near water. For example: near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.
Ventilation - The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
Also, it should not be placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of
air through the ventilation openings.
Heat - The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances {including amplifiers) that produce heat.
Power Sources - The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug
having one blade wider than the other). As a safety feature this plug will fit into the power outlet only one way. If
you are unable to fit the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of your polarized plug.
Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Itis always best to have a clear area from where the cord exits the
unit to where it is plugged into an AC outlet.
Cleaning - The unit should be cleaned only as recommended by the manufacturer.
Non-Use Periods - The power cord of the unit should be unplugged from the outlet when it is to be left unused
for a long period of time.
Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the
enciosure through openings.
3
A Consumer Guide to Product Safety
10. Damage Require Service - The unit should be serviced by qualified service personnel when:
А.
В.
С.
D.
E.
The power supply cord or plug has been damaged.
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged.
The unit does not appear to operate normaly or exhibits a marked change in performance.
11. Antenna - Do not connect to an external antenna.
12. Servicing - The user should not attempt to service the unit beyond that described in the user's operating instructions,
All other servicing should be referred 10 qualified service personnel.
13. If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
A Consumer Guide to Product Safety
FCC Information
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits
provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TY or radio interference even when it is operating properly. To eliminate
interference you can try one or more of the following corrective measures:
. # Reorient or relocate the receiving antenna.
s Increase the distance between the equipment and the radio or TV.
e Use outlets on different electrical circuits for the equipment and the radio or TV
Consult your dealer or an experenced radio/television techniclan if the problem still exists.
Modifying or tampering with your system's internal components can cause a malfunction and might invalicate the
— system's warranty and void your FCC authorization to operate it. If your system is not performing as it should, call SDI
; Technologies Inc, Timex Audio Products Consumer Services, 1-800-888-4491 for assistance.
Preparation for Use
Preparation for Use
1. Remove the radio and all packing materials from the carton. You should save all the packing materials if the unit
ever needs to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources of
excess dust, dirt, heat, water, moisture, vibration and strong magnetic fields.
3. Plug the AC cord into an outlet.
important - If you are going to install batteries for the Battery Backup System, they should always be installed before
plugging in the AC cord. (See Battery Backup Installation)
Maintenance
1. Protect your furniture when placing the unit on a natural wood and lacquered finish. A cloth or other protective
material should be placed between the unit and the furniture.
2. You may clean your unit with a soft cloth moistened only with mid soap and water. Stronger cleaning agents can
mar the surface of the case.
Battery Backup Installation
1. Gently turn the unit over and remove the battery compartment door.
2. Install 3 “AAA” batteries, while making sure that the + and - ends match up
with those inside the battery compartment.
3. Ne the battery compartment door, turn the unit over, and piug back in the
AC cord.
Preparation for Use
Battery Backup System
The Battery Backup System will maintain the time, date, and alarm in the event of a power failure. If the power goes
out or the AG cord is accidentally disconnected the radio and nature sounds will not play, but the display remains
visible and the clock continues to run. |
“If vou have set the alarm for radio or nature sounds and there is a power failure during your wake up time, the radio
and nature sounds will default to buzzer. If the alarm has sounded and the radio or nature Sounds are playing, then a
power failure occurs, once again they will default to buzzer.
If a power failure occurs and there are no batteries in the battery compartment, all time, alarm, and memory settings
will be lost.
Controls and Indicators
(8 Alarm Set Button
(5 Radio Alarm Button
(à Sounds Alarm Button
(3 Buzzer Alarm Button
Sncoze/Night
Light Bar (2)
OnvSleep Button (1)
(3) Off/Reset Button
Hr./Mon. Button @ rer т
Tuning Up Button = = Praset Up Button
Min./Date Button = ——— ;
Tuning Down Button eros smn РО, © Preset Down Button
Time/Cal. Button (9 | —~: = = - (© Memory Set Button
AM/FM/Sounds Nm ce pon
Boon 65 (00.009 e on "une (7) Sleep Volume Button
Ocean Button à uN © Wind Button
— (8) Volume Dial
Brook Button a
Forest Button
8
LCD Display
Radio Alarm Indicator
Sounds Alarm Indicator
Buzzer Alarm Indicator
| amb и I | Calendar Mod
— ss — — alendar Mode
4 SOUNDS 4 BUZZER L (Preset Station
Numbers)
PM Indicator PM,
— Clock Display
(Radio Frequency
Display)
AM Indicator AM FM— ee 0
CC SOUNDS ) SLEEP IBROOK
—— Nature Sounds
Sounds Indicator
Sleep Volume Indicator
FM Indicator
9
Setting the Clock Time and Calendar
Important - While setting the Time or Calendar, ¡f you do not press the Y Hr./Mon or E Min/Date Buttons within
approximately 10 seconds, the display will stop flashing. If this happens you must press the Y Time/
Cal. Button Once to enter the clock setting mode and Twice to enter the calendar setting mode.
1. Press the Y Time/Cal. Button Once. The clock digits begin to flash.
. Press the © Hr/Mon. Button to set the correct hour. Make sitre you set the correct AM or PM. The PM
Indicator is located on the left side of the display.
Press the & Min./Date Button to set the correct time.
Press the © Time/Cal. Button. The date will begin to flash.
Press the @ Hr./Mon. Button to set the correct month.
Press the Min./Date Button to set the correct date.
After the correct time and date are displayed, press the & Time/Cal. Button Once to exit the setting mode.
MO
мо A о
10
Listening to the Radio
Antenna Information
FM - Extend the FM wire antenna to it's full length and vary the direction for it's strongest signal.
AM - The AM bar antenna is located inside the cabinet. Rotate the cabinet until you find the strongest AM signal.
Important - If the € On/Sleep Button is pressed more than Once, the unit will enter the sleep mode. The current
time display will have changed to the Sleep Time Indicator (20, 60, 30, 15). Repeatedly press the @
On/Sleep Button until the current time appears on the display.
1. Press the € On/Sleep Button Once to turn the power ON.
2. Press the 6) AM/FM/Sounds Button until the display changes to the AM or FM radio frequency you desire. The
AM or FM Indicator will appear on the bottom left side of the display.
3. Press the @ € Up or Down Tuning Buttons fo find the station you desire.
4. Rotate the € Volume Dial to adjust the volume level.
5. Press the & Off/Reset Button to turn the power OFF when you are finished listening.
Manual Tuning
Repeatedly press the @ & Up or Down Tuning Buttons to find the station you desire.
Auto Tuning
Press and hold one of the (y ® Up or Down Tuning Buttons until the radio frequency begins to scan to the next
strongest station.
Last Station Memory
The tuner always remembers the last station selected before the radio was switched OFF and automatically selects
the station again when the radio is turned ON.
11
Preset Station Memories
This radio has a total of 18 preset station memories (6 AM and 12 FM preset stations). To enter stations into memory
de the following:
1. Press the @ On/Sleep Button Once to turn the power ON.
2. Press the €) AM/FM/Sounds Button until the display changes to the AM or FM radio frequency you desire. The
AM or FM Indicator will appear on the bottom left side of the display.
3. Press the @ Y Up or Down Tuning Buttons to find the station you desire.
4. Press the Q) Memory Set Button Once while the station is displayed. The radio station digits will begin to flash.
5. While the digits are flashing, press the 69) Up cr Down Preset Buttons unti! you find the preset number you
want to store the station in. The Preset Station Numbers appear on the top right side of the display.
6. Press the Q Memory Set Button again, the station will now be set.
Important - If you do not press the @& Up or Down Preset Buttons in Step 5 within 10 seconds, the station
frequency will stop flashing. Press the Q Memory Set Button Twice and proceed to Step 5 again.
To preset more stations simply follow the steps above.
Recalling Preset Station Memories
1. Press the @ On/Sleep Button Once to turn the power ON.
2. Press the @) AM/FM/Sounds Button until the display changes to the AM or FM radio frequency you desire. The
AM or FM Indicator will appear on the bottom left side of the display.
3. Press the @@ Up or Down Preset Buttons to find the desired preset station.
Changing Preset Stations
To change a preset station simply follow the instructions under Preset Station Memories and enter a new station
into the preset number you wish to change. The new station will be "remembered" and the previous station will be
“forgotten”.
12
Listening to Nature Sounds
1. Press the @ On/Sleep Button Once to turn the power ON.
2. Press the @) AM/FM/Sounds Button until the (souses) Indicator appears on the bottom left corner of the
cisplay.
3. Press any of the four nature sound buttons QODES Wind, Forest, Brook, Ocean).
4, Rotate the 6) Volume Dial to adjust the volume level.
5. Press the 6) Off/Reset Button to turn the power OFF when you are finished listening.
Important - Playing the nature sound of your choice will not affect the one that is set for the wake-up time.
Setting the Radio Alarm Time
Before you begin please note the following important information:
« While setting the alarm times, the display will return to the current clock time if no bution is pressed within 10
seconds. You can exit the Setting Mode at anytime by simply pressing the (Y Alarm Set Button repeatedly until
the current clock time is displayed.
—e Before setting the Radio Alarm Time, you must preset the radio station you wish to wake to, into the preset
memory (see Preset Station Memories).
. Press the Y Alarm Set Button until the Radio Alarm Indicator flashes on the upper left side of the display.
2. Press the @ AM/FM/Sounds Button to choose the AM or FM band you desire. The AM or FM Indicators will
appear on the lower left side of the display.
. Press the @@® Up or Down Preset Buttons fo find the preset station you wish to wake to.
4, Press the (Y Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The PM
Indicator is located on the left side of the display.
5. Press the & Min./Date Button to set the alarm time you desire.
. Press the Alarm Set Button fhree times to return to the current time display.
7. Press the & Radio Alarm Button until the Radio Alarm Indicator appears on the upper left side of the display
to confirm that Wake to Radio is ON. 13
—
La
CH
Setting The Nature Sounds Alarm Time
Important - While setting the alarm times, the display will return to the current clock time if no button is pressed
within 10 seconds. You can exit the Setting Mode at anytime by simply pressing the $ Alarm Set
Button repeatedly until the current clock time is displayed.
. Press the 3 Alarm Set Button until ihe Sounds Alarm Indicator flashes on the upper left side of the
display.
While the Sounds Alarm Indicator and ciock digits are flashing, press the nature sounds button 0000
(Wind, Forest, Brook, Ocean) to choose the sound you wish to wake to.
Press the Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The
PM Indicator is located on the left side of the display.
Press the (E) Min./Date Button to set the alarm time you desire.
Press the 3 Alarm Set Button two times to return to the current time display.
Press the @ Sounds Alarm Button until the Sounds Alarm Indicator appears on the upper left side of the
display to confirm that Wake 10 Sounds Is ON.
Setting the Buzzer Alarm Time
Important - While setting the alarm times, the display will return 10 the current clock time if no button is pressed
OR mM
within 10 seconds. You can exit the Setting Mode at anyiime by simply pressing the $ Alarm Set
Button repeatedly until the current clock time is displayed.
Press the @ Alarm Set Button until the Buzzer Alarm Indicator flashes on the upper left side of the display.
Press the @ Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The
PM Indicator is located on the left side of the display.
Press the {® Min./Date Button to set the alarm time you desire.
Press the 3 Alarm Set Button one time to return to the current time display.
Press the € Buzzer Alarm Button until the Buzzer Alarm Indicator appears on the upper left side of the
display to confirm that Wake to Buzzer is ON,
14
Check Your Wake-Up Settings
+ Press the @ Alarm Set Button to change the current clock time to the flashing alarm time display with the
flashing alarm indicator on the upper left side.
+ Repeatedly press the @ Alarm Set Button until you see the Radio, Sounds, or Buzzer Alarm Indicator
and the corresponding time flashing on the display.
Wake to Radio, Sounds, and/or Buzzer
e You can wake to 3 different alarm times by setting different wake up times for the Radio, Nature Sounds, and/
or Buzzer. To activate all or any of the three alarms, simply press the Radio Alarm Button, & Sounds
Alarm Button, and/or 6) Buzzer Alarm Button until the alarm indicator appears on the upper left corner of
the display.
Important - If your alarm is set for Radio or Nature Sounds, make sure you have used the (8) Volume
Dial to adjust the volume to a comfortable wake to volume level.
e After the alarm turns on, press the €) Off/Reset Button to turn off the alarm. The alarm will turn on again at
the same time the following day unless the controls are changed.
* To cancel any or all three alarms, simply press the E Radio Alarm Button, @ Sounds Alarm Button, and/
or §© Buzzer Alarm Button until the alarm indicator disappears from the upper left hand corner of the
display.
« [fthe alarm is not turned off after it sounds, it will play for approximately 1 hour, then turn off automatically. This
cycle will repeat every 24 hours unless the controls are changed.
15
Snooze and Back Light Operation
If you need a few extra minutes of sleep when the alarm turns on, press the @ Snooze/Night Light Bar. The
alarm will turn off, then come back on again in approximately 10 minutes. You can repeat this cycle several
times during the 1 hour time period.
If you need to adjust the display's back lighting, press tne €) Snooze/Night Light Bar. The display's back
lighting will change with each touch of the @ Snooze/Night Light Bar from Hi to Medium to Low.
Sleep to Radio, Sounds, or Buzzer
A Nh
Press the € On/Sleep Button 7wice to enter the Sleep Mode.
Repeatedly press the @ On/Sleep Button to choose the sleep time in 90, 60, 30, and 15 minute increments.
The Sleep Volume Indicator will appear on the display.
Press the € Sleep Volume Button to adjust the sleep volume to a comfortable volume level, Also, rotate the
© Volume Dial if necessaryt. |
Press the @) AM/FM/Sounds Button to select AM, FM, or Nature Sounds.
Press the €) Off/Reset Button to turn off the Radio or Nature Sounds before the sleep time has elapsed.
16
Limited 90 Day Warranty
Timex Audio Products, Division of SDI Technologies Inc., warrants this product to be free from defects in workmanship and material
under normal use and conditions for a period of 80 days from the date of original purchase.
Should service be raquired by reason of any defect or malfunction, it is best to first return this product and all parts there of, to the store
where it was originally purchased. If you need to send the product for service, and itis during the first 80 days of the warranty period,
SDI Technologies Inc. will repair, or at its discretion, replace this product with proof of purchase, without charge (except for a $5.00 charge
for handling, packing, return UPS/postage and insurance). After 90 days the cost of labor is the customer's responsibility. The fee for
service after the warranty period or without proof of purchase is $10.00.
Before returning this product for service, replace the batteries (if applicable) with fresh ones, because exhausted or defective batteries
are the most commen cause of problems encountered.
If service is still required:
1. Remove the batteries {if applicable} and pack the unit in a well padded, heavy corrugated box.
2, Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty
period.
3. Also enclose a check or money order payable to the order of SDI Technologies Inc., for the sum of $5.00 (or $10.00 after the
warranty period).
4, Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
Timex Audio Products Division
8883 Gateway West
El Paso, Texas 79925
Please Note: This warranty is valid only in the United States of America. Any applicable implied warranties are also limited to 80 days,
and SDI Technologies Inc. will not be liable for consequential damages. {Some states do not allow imitations on implied warranties or
exclusions of consequential damages, so that these restrictions may not apply to you). This warranty gives you specific legal rights,
and you may also have other rights, which vary from state to state.
For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the U.S. and other countries.
1300-200322-0 Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement