USER GUIDE - Turtle Beach

USER GUIDE - Turtle Beach
Designed for
WIRELESS NOISE-CANCELLING DTS SURROUND SOUND HEADSET
USER GUIDE
Package Contents
For our Knowledgebase and Technical Support visit
turtlebeach.com/support
A
Turtle Beach
Elite 800X Headset
E
B
C
Elite 800X Transmitter &Magnetic Charging Stand
F
D
USB Transmitter
Cable
G
USB Programming
Cable
H
I
WIRELESS
For: Xbox One | Mobile
Quick Start Guide
PRESET
REFERENCE
For more information visit / Rendez-vous sur
Turtlebeach.com/connect
Mobile Cable
Digital Optical Cable
Turtlebeach.com/Elite800X
Elite 800X
Quickstart Guide
Go to Table of Contents
Turtle Beach Elite
Program Welcome
Elite 800X
Preset Reference
2
About the Elite 800X
5
Parts and controls
7
Headset Charging
10
Xbox One™ Setup
11
Wired Setup
13
Bluetooth Pairing
14
Bluetooth Operation
15
Pairing the Headset and Transmitter
16
Active Noise Cancellation
17
Adjusting the Sound
18
Firmware Upgrades and Personalization
21
Replacing Rocker Plates
22
Specifications23
Troubleshooting tips
24
Important safety information
26
Regulatory Compliance Statement
27
Declaration of Conformity
28
Warranty32
About the Elite 800X
The Turtle Beach Elite 800X is a sophisticated gaming headset designed to unlock the audio potential of games, music,
movies and more. To get the most from your Elite 800X, please take a few moments to review this introduction.
Overview
Welcome to the future of gaming audio with Turtle Beach Elite. Powerful sound, abundant comfort and dynamic function
combine to exceed your wildest expectations with the Turtle Beach Elite 800X. Uncompromising, the Elite 800X is the ultimate in completely wireless Xbox One noise-cancelling, surround sound gaming audio.
Silence is Golden
Eliminate unwanted distractions with Active Noise Cancellation in
console and mobile modes.
Crystal Clear Wireless
Intelligent channel-hopping for an interference-free
wireless experience.
DTS Headphone:X 7.1 Surround Sound
Creates an amazing, 3D 360-degree sound stage with unmatched
spatial accuracy.
Enhanced DTS Surround Sound Modes & Presets
Custom DTS Surround Sound modes combine with enhanced Turtle
Beach genre-specific presets to further immerse you in your favorite
games, movies and music.
Hidden, High-Quality Microphones
Dual hidden microphones, with environmental presets to ensure you are
always heard – regardless of your surroundings.
Go to Table of Contents
4
About the Elite 800X
Magnetic Charging Stand
Low profile magnetic charging stand keeps your Elite 800X fully charged
without cables.
Never Miss a Text or Call
Pair your mobile phone to hear text notifications or take calls
while gaming.
Rechargeable Battery
Built-in rechargeable battery delivers over 10 hours
of wireless gaming.
Companion App
Download the Ear Force Audio Hub for Android to wirelessly control all
aspects of the Elite 800X. Volume Levels, Surround Modes, Presets, and
a designated Superhuman Hearing function are included along with a direct connection to the Elite Support Line for any questions you may have.
Swappable Rocker Plates
Easy-to-use rocker plates can be swapped with new designs from
turtlebeach.com/speakerplates.
Go to Table of Contents
5
About the Elite 800X
Separate Volume Controls
Set your mix of game and chat volume levels right on the headset.
Stop SHOUTING!
Mic Monitoring lets you hear your own voice in the headset
to avoid shouting.
Dynamic Chat Boost™
Even during loud gameplay spikes, chat volume automatically rises to
ensure you never miss a command.
Easy Setup
Setup is easy from the USB and optical connections to the magnetic
charging stand, which doubles as the wireless transmitter
Go to Table of Contents
6
Parts and controls
Headset Controls: Left Earcup
Game Volume +/- Buttons
Raise and lower the Game Volume.
Bluetooth/Multi-Function Button
See the “Bluetooth Pairing
and Operation,” pages 14-15.
Power/ANC Button
Press = Active Noise Cancellation On/Off
Press and Hold = Headset Power On/Off
Wired Mobile Connection
Power LED
HEADSET STATUS
Green = Active Noise Cancellation Off/Fully Charged
Orange = Active Noise Cancellation On
PAIRING STATUS
Solid On = Headset Connected
Double Blink = Headset Not Connected
Go to Table of Contents
7
Parts and controls
Headset Controls: Right Earcup
Chat Volume +/- Buttons
Raise and lower Chat Volume
Mic Mute Button
Press = Mic On/Off. A high tone in the
Headset will confirm Mic On. A low tone
will confirm Mic Off.
Preset Button
Press = Cycle through Turtle Beach
Signature Audio Presets. A voice prompt
in the Headset will confirm your
selection.
Press and Hold = Cycle through Mic Presets.
Quiet Room > Normal Room > Loud Room >
Outdoor.
A voice prompt in the Headset will confirm
your selection. For more information, see
“Adjusting Sound,” page 18.
Press and Hold = Cycle through DTS
Headphone:X Surround Modes. A voice
prompt in the Headset will confirm your
selection.
Bluetooth Status LED
AUDIO MODE
Green = Call Mode (HSP)
Orange = Stereo Mode (A2DP)
PAIRING STATUS
Single Blink = Headset Connected
Double Blink = Headset Not Connected
USB Charging/Update Port.
For more information, see
“Headset Charging,” page 10.
Charging Contacts
DTS Headphone:X Surround Modes
OFF
GAME MODE
MOVIE MODE
MUSIC MODE
SURROUND OFF
· Signature Sound
· Signature Sound
· Signature Sound
· Natural Sound
· Shooter
· Action
· Stadium
· Bass Booster
· Racing
· Horror
· Acoustic
· Bass & Treble Booster
· Sports
· Drama
· Drama
· Vocal Booster
· Superhuman hearing
· Footstep Focus
*Surround Modes only available when paired to the transmitter.
Go to Table of Contents
8
Parts and controls
Transmitter: Front
Transmitter: Back
Bluetooth Status LED
CHARGING STATUS
Red = Headset Seated on Transmitter
Green = Headset Not Seated on Transmitter
PAIRING STATUS
Solid On = Headset Wirelessly Connected
Double Blink = Headset Not Connected
Power and Chat USB
Pairing Button
To initiate pairing, in the unlikely event that it
becomes necessary. See “Pairing the Headset
and Transmitter,” page 16.
Digital Optical Audio Input
For connection to your Console
Digital Optical Audio Out
For audio pass-through to a
television or external audio system.
Go to Table of Contents
9
Headset Charging
Even when the Elite 800X operates via wired connection to mobile devices, it can still use the internal amplifier and so requires
power from its rechargeable battery. When charging, the Transmitter LED will glow Red.
A
B
C
1. Connect the Elite 800X Transmitter to the Xbox One with the USB Transmitter Cable.
2. Place the Headset on the Transmitter. Align the charging contacts on the right earcup of the Headset with the charging pins
on the right side of the Transmitter.
NOTE: The Status LED on the front of the Transmitter will turn Red when the Headset is properly seated on the Transmitter.
If the Status LED is Green or Orange, remove the headset from the base, wait 10 seconds and place the headset back onto the
transmitter.
It is also possible to recharge the Headset during game play, with the use of a third-party USB-A-to-micro-USB cable, sold
separately. We recommend a cable of sufficient length for comfortable game play.
A
1. Connect the Elite 800X Headset to the Xbox One with a USB Micro Charging Cable.
NOTE: The Power LED on the Headset does not indicate charging status when you recharge via USB cable.
WARNING: Never fully deplete the battery then put the unit in storage, as this may cause irreversible damage to the battery.
Following these simple guidelines will ensure that your Turtle Beach wireless headset will provide many hours of enjoyment.
NOTE: In order to achieve and maintain optimal battery performance for your Turtle Beach wireless headset, proper care is
required when charging and storing. Always charge the battery before storing the unit for more than 3 months! Never store the
unit in temperatures above 113°F/45°C. Store the headset at room temperature (72°F/22.5°C) and at humidity below 75%.
Go to Table of Contents
10
Xbox One Setup
A
C
B
Required
Make sure the Xbox One is fully powered on and
signed into a Xbox Live profile before connecting
the Transmitter for the first time.
F
Note: Remove the clear plastic caps from the ends
of the Digital Optical Cable before connecting.
Console Console
DIGITAL OUT
(OPTICAL)
Go to Table of Contents
11
Xbox One Setup
1.Go to the Xbox One Home Screen and
Pres the
button on the Xbox
One Controller.
Settings
TESTING LAB
CONSOLE
FA M I LY
About me
OT H E R P E O P L E
Add to family
Sign-in, security &
passkey
Network
Kinect
Preferences
TV & OneGuide
Disc & Blu-ray
System
Display &
sound
Closed
captioning
Privacy & online safty
Payment & billing
Subscriptions
Remove accounts
Set up your family to
manage your
children’s Xbox
experiences.
CC
My home Xbox
Power &
startup
2. Go to Settings > Display & Sound > Optical Audio,
Select Bitstream Out
Display & sound
Off
VIDEO FIDELITY
CONSOLE
VOLUME
Color depth
36 bits per pixel
Sound mixer
Color space
PC (RGB full)
Chat mixer
Allow 50 Hz refresh rate
Stereo uncompressed
Bitstream out
Setup TV & A/V control
Change volume with voice by
3 steps
3. Go to Settings > Display & Sound > Bitstream
Format, Select Dolby Digital
Display & sound
DTS Digital Sound
VIDEO FIDELITY
CONSOLE
VOLUME
Color depth
36 bits per pixel
Sound mixer
Color space
PC (RGB full)
Chat mixer
Allow 50 Hz refresh rate
Dolby Digital
Note: Do NOT select DTS Digital Sound. The Elite
800X is designed to accept Dolby Digital content for
the best possible audio experience.
Setup TV & A/V control
Change volume with voice by
3 steps
Go to Table of Contents
12
Wired Setup
The Turtle Beach Elite 800X is equipped to take advantage of game audio, music and video sound tracks from portable
devices, including laptops, tablets, mobile phones and handheld gaming consoles, via the supplied Mobile Cable.
Connect one end of the Mobile Cable to the Mobile Connection on the left earcup of the Headset and the other end to the
headphone jack of your mobile device.
NOTE: You can continue to enjoy stereo audio via wired connection, even when the Headset power is off. When the Headset
power is on, you can also take advantage of the built-in microphones and Active Noise Cancellation.
Go to Table of Contents
13
Bluetooth Pairing
While the supplied Mobile Cable gives you wired connection to mobile devices, the Bluetooth feature enables wireless
connections (HSP + A2DP). Enjoy the Turtle Beach Elite 800X with compatible mobile devices, such as tablets, smartphones and the handheld gaming devices.
1. Power on your mobile device and go to Settings > Wireless and
Networks, or the equivalent.
2. Power on the Elite 800X Headset. Press
and hold the Bluetooth/Multi-Function button
on the left earcup for four seconds.
4 seconds
3. On your mobile device, select Turtle Beach Elite 800X from the
list of available Bluetooth devices and complete pairing.
Go to Table of Contents
14
Bluetooth Operation
The effect of the Bluetooth Multifunction Button varies depending on whether you’re in call mode or stereo mode.
Left Earcup
Bluetooth Multifunction Button
Action
Call Mode
Stereo Mode
Single Press
Answer/End call
Play/Pause
Double Press
Redial
Next Track
In addition, three buttons on the right earcup change function when you’re using the Elite 800X exclusively via Bluetooth
connection. NOTE: Functionality may vary by connected Bluetooth device.
Right Earcup
Chat Volume Up Button
Short Press = Next Track
Long Press = Previous Track
Preset Button
Short Press = Cycle through EQ Presets:
Signature Sound > Bass Boost
Bass & Treble Boost > Vocal Boost
Chat Volume Down Button
Short Press = Play/Pause
Go to Table of Contents
15
Pairing the Headset and Transmitter
The Elite 800X Headset and Transmitter come paired out of the box. When paired, with both the Headset and Transmitter powered
on, the Transmitter’s LED will be on solid (lit, but not blinking). However, if your Transmitter’s LED is double-blinking, follow the
steps below to pair your Headset and Transmitter.
4 seconds
1. Start this process with the headset powered OFF.Press and hold the Pairing Button on the Transmitter until the
Transmitter’s Pairing LED flashes rapidly (5 seconds), then release.
2. Press and hold the Power Button on the Headset until the Headset’s Power LED flashes rapidly (5 seconds), then release.
5 seconds
3. Within 30 seconds, the Transmitter and Headset’s LEDs will remain Solid, indicating that pairing has been successful.
Go to Table of Contents
16
Active Noise Cancellation
Active Noise Cancellation suppresses ambient noise, especially low-frequency noise such as aircraft engines and road noise. The
system works by sensing outside noise with the built-in microphones and sending an equal-but-opposite signal into the
headphones. The soft cushions of the Elite 800X also help block external sound, providing an added level of noise reduction.
• To turn on Active Noise Cancellation (ANC), with the headset on, press the Power/ANC Button. A voice prompt in the Headset
will confirm your selection and the Power LED will turn Orange.
• To turn off ANC, with the headset on, press the Power/ANC Button again. A voice prompt in the Headset will confirm your
selection and the Power LED will turn Green.
NOTE: To comply with safety requirements in airline use, be sure that Elite 800X Bluetooth operation is turned off.
NOTE: You can only turn Active Noise Cancellation on or off when the Elite 800X Headset itself is turned on.
Go to Table of Contents
17
Adjusting the Sound
If you want to...
Then
Adjust game/media volume.
Use the Game Volume Up/Down buttons on the left earcup of the Headset.
Adjust chat volume.
Use the Chat Volume Up/Down buttons on the right earcup of the Headset.
Turn the microphone on or off.
Press the Mic Mute Button on the Headset. A high tone in the Headset will confirm
Microphone On. A low tone will confirm Microphone Off.
If you want to...
Select Microphone Presets.
Then
The Headset features built-in microphones and powerful digital signal processing to
optimize the sound for different environments. Press and hold the Mic Mute button to cycle
through the mic presets.
Your selection will be confirmed by a voice prompt in the Headset.
Quiet Room. For a quiet room with no outside noise distractions. This setting features the
widest field of voice pickup and natural voice fidelity.
Normal Room. Block out normal room noises: air conditioning, fridge humming,
conversations in other rooms, etc.
Loud Room. Block out louder room noises: ceiling fan, music in other rooms, conversations
in the same room, etc.
Outdoor. Focus voice pickup around your mouth—like holding an inline mic right up to your
mouth. Reduce the pickup of other sounds when talking outdoors.
NOTE: These descriptions itemize the modes available using the initial firmware version for
the Elite 800X. Upgraded or personalized headsets may have additional or revised modes not
shown here.
Turn Active Noise Cancelling
on or off.
Press the Power/ANC Button on the Headset. A voice prompt in the Headset will confirm
your selection. In addition, the Headset Power LED will turn Orange when ANC is on and
turn Green when ANC is Off.
NOTE: You can only turn Active Noise Cancellation on or off when the Elite 800X Headset
itself is turned on.
Go to Table of Contents
18
Adjusting the Sound
If you want to...
Then
Adjust surround sound.
The Elite 800X takes advantage of DTS® Headphone:X Surround Sound, which uses sophisticated processing to create surround sound using just two speakers. The system detects Dolby Digital® sound tracks from the Xbox One. The DTS system then processes these signals
especially for headset playback. The system reproduces the sonic characteristics of rooms
optimized for specific types of content. Press and hold the Preset Button on the right earcup
of the Headset to cycle through four surround modes. Your selection will be confirmed by
voice prompts in the Headset.
Game Mode > Movie Mode > Music Mode > Surround Off (Stereo Mode)
NOTE: These descriptions itemize the modes available using the initial firmware version
for the Elite 800X. Upgraded or personalized headsets may have additional or revised modes
not shown here.
Select presets.
For each of the DTS® Headphone:X Surround Sound modes, Turtle Beach has designed
presets that optimize the sound for specific types of games, music and movies. Press the
Preset Button on the right earcup of the Headset to cycle between each preset within the
currently selected surround sound mode.
Your selection will be confirmed by voice prompts in the Headset.
NOTE: The descriptions below itemize the modes available using the initial firmware version
for the Elite 800X. Upgraded or personalized headsets may have additional or revised modes
not shown here.
DTS Headphone:X
7.1 Surround Modes
SURROUND GAME MODE
Turtle Beach
Signature Presets
Signature Sound. Turtle Beach tuning places you in the middle of the action, enabling you
to hear your games just as the developers intended.
First Person Shooter. Enter the warzone fully armed. Feel your gun’s recoil hit your chest.
Experience the full force of explosions as you lead your squad to victory.
Racing. Feel the engine underneath you and hear your opponents’ cars at your back as you
battle for the win.
Sports. Put yourself in the middle of a packed stadium with fans cheering you on from
every angle.
Superhuman Hearing. Gain the ultimate audio advantage. Amplify low and faint sounds to
hear everything. Pinpoint your enemies and defeat them before they know you’re there.
Footstep Focus. Focus on the sound of enemy footsteps approaching. Hear every detail and
gain a true audio advantage.
SURROUND MOVIE MODE
Signature Sound. Turtle Beach gives you the best seat in the house. Experience your
movies as never before.
Action. Be the hero. Face the explosions. Duck the gunfire and hear the evac chopper
circling overhead as you save the world again.
Horror. Build the suspense. Hear every creaking footstep and bone-rattling scream.
Just try to get out alive.
Drama. Intensify the story and bring characters to life with pinpoint vocals and enhanced dialog.
Go to Table of Contents
19
Adjusting the Sound
DTS Headphone:X
7.1 Surround Modes
SURROUND MUSIC MODE
Turtle Beach
Signature Presets
Signature Sound. Turtle Beach brings the music onto your personal stage. Scan your ticket
for your own private concert.
Stadium. Experience live concert music as it was meant to be heard. Feel the crowd around
you as the band on stage turns it up to 11.
Acoustic. Experience a personal concert for one: just you and your favorite artist.
Dance. Put your hands in the air and place yourself in the middle of a nightclub as the DJ
drops your favorite track.
SURROUND OFF
(STEREO MODE)
Natural Sound. Turtle Beach tuned natural sound delivers your media just as the
creators intended.
Bass Booster. Turn up the bass. Feel the deep sound effects in your games and the punch
of music tracks.
Bass & Treble Booster. Turn up the excitement with increased highs and lows for a more
powerful audio experience.
Vocal Booster. Tune in to the vocals on music tracks and dialog in games and movies.
Make characters and stories come alive.
Control Bluetooth sources.
Special functions are available when you’re using the Elite 800X exclusively via Bluetooth
connection. For details, see “Bluetooth Operation,” page 15.
Go to Table of Contents
20
Firmware Upgrades and Personalization
Turtle Beach Windows Ear Force Audio Hub
The Elite 800X is a highly programmable, microprocessor-based headset, designed to accept firmware upgrades from the
Windows and Mac Ear Force Audio Hubs.
Firmware upgrades
You can check to see that you have the latest, most advanced firmware at www.turtlebeach.com/Elite800X.
To upgrade the Elite 800X, connect the Headset to a computer using the USB Programming Cable and then connect the
Transmitter using the USB Transmitter Cable. Follow the instructions on the website for downloading and upgrading the firmware.
NOTE: The operation of upgraded and/or personalized headsets may not completely match the operations described in
this manual.
Turtle Beach Android Ear Force Audio Hub
Download the Ear Force Audio Hub app to wirelessly change presets on the fly using your Android™ mobile phone or tablet.
Future Turtle Beach Companion Apps may provide additional opportunities to customize and control your Elite 800X headset.
www.turtlebeach.com/Elite800X
Go to Table of Contents
21
Replacing Rocker Plates
Customize your headset at
www.turtlebeach.com/plates
NOTE: The availability of additional speaker plates varies by market as is subject to local restrictions.
Go to Table of Contents
22
Specifications
HEADSET
Speakers: 50 mm with Neodymium Magnets
Frequency Response: 20 Hz – 20 kHz
Earcup Design: Around-Ear (Closed)
Microphone Design: Dual Hidden Noise-Cancelling Microphones
Bluetooth: Bluetooth Radio with Dual-Pairing Mode and A2DP Compatibility
Battery: Rechargeable Lithium Polymer
TRANSMITTER
Game Input: Digital Optical (Toslink) with Digital Optical Pass-through
Chat/Mic Input/Output: USB
Surround Sound Processing: DTS Headphone:X 7.1
Wireless Connection: RF with Intelligent Channel Hopping
Wireless Range: Up to 30 ft. (9 m)
Power: USB
Go to Table of Contents
23
Troubleshooting Tips
No sound
Possible cause
Solution
Power is off
Confirm that the Headset is on. The Headset Power LED should be illuminated.
Dead/low battery
Recharge the Headset. See “Headset Charging,” page 10.
NOTE: The Ear Force Audio Hub app for Android™ phones and tablets enables you
to check battery status.
Game Volume turned down
Press the Game Volume Up Button on the Headset.
Loose connection
Confirm that Transmitter is firmly connected.
Check that the USB Transmitter Cable and Digital Optical Cable are completely
seated at both ends.
In mobile use, confirm that the Mobile Cable plugs are firmly seated in the Headset
and the mobile device.
Lost pairing
Confirm that the Status LED on the Transmitter stays on. If the LED is blinking,
it indicates that the Transmitter isn’t communicating with the Headset.
See “Pairing the Headset and Transmitter,” page 24.
Poor Wi-Fi transmission
For best performance, stay within 30 feet from the Transmitter.
Confirm that there is no wall or other large object between the Headset
and Transmitter.
Confirm that the location of the Transmitter is clear of obstructions and isolated
from Wi-Fi base stations or other potential sources of interference.
Audio Drops, Popping or Clicking Sounds
Possible cause
Solution
Poor Wi-Fi transmission
For best performance, stay within 30 feet from the Transmitter.
Confirm that there is no wall or other large object between the Headset
and Transmitter.
Confirm that the location of the Transmitter is clear of obstructions and isolated from
Wi-Fi base stations or other potential sources of interference.
Voice Chat Drops
Most in-game voice chat drops are caused by network congestion or “lag.” They usually subside after a few moments so please
be patient. In extreme cases, you may need to leave the game and return to reset the chat function.
If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction.
For best results, we recommend a wired connection from your modem/router to your Xbox One.
Go to Table of Contents
24
Troubleshooting Tips
Voice Chat Drops
Possible cause
Solution
Not selected as an Input Device
Go to Settings > Devices and make sure that the Elite 800X headset is bound to your
Xbox Live Account.
Voice chat can also be effected by the NAT Type Configuration of your internet connec
tion. If your NAT Type is listed as STRICT in the Xbox One Wireless Settings we suggest
that you work with Xbox Support to correct this for the best chat experience.
Mic muted
Press the Mic Mute Button on the right earcup of the Headset. A high tone in the
Headset will confirm that the mic is now on.
Bluetooth not working
Try using the Bluetooth pairing instructions (see “Bluetooth Pairing” on page 22) to pair your headset to a different
Bluetooth-ready mobile phone than the one you usually use. With the headset paired to the phone, call a friend/relative.
Is the person you are calling able to hear you?
Are you able to hear the person you are calling? If you’re experiencing the same issue with two different phones, you will want to
contact our support team via the link below.
If your issue is not resolved by these steps, please visit turtlebeach.com/support
Go to Table of Contents
25
Important Safety Information
To avoid potential damage to the device, always disconnect all cables before transporting it.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so
it is important to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may
not cause initial discomfort can still damage your hearing. If you experience ringing in your ears after listening with the
headset, it means the volume is set too loud.
The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate
levels.
• Before placing a headset on your ears, turn the volume down completely, then slowly increase it to a comfortable level.
• Turn down the volume if you can’t hear people speaking near you.
• Avoid turning up the volume to block out noisy surroundings.
Go to Table of Contents
26
Regulatory Compliance Statements for the Elite 800X RX & TX Models
Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the Elite 800X RX & TX Models:
• FCC ID: XGB-TB2390 and XGB-TB2391
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
• Non-Modification Statement
• Deployment Statement
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such
that the antenna of the device will be greater than 2 cm (0.8 in.) from all persons. Using higher gain antennas
and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the
radio and end users of the product must adhere to the installation instructions provided in this manual. This
transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage
the Elite 800X RX & TX Models and violate FCC regulations. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Please contact Turtle Beach for a list of approved 2.4 GHz and 5.0 GHz antennas.
Deployment Statement
This product is certified for indoor deployment only in the 5150 – 5250 MHz band. Do not install or use this
product outdoors in that frequency band in the United States.
Go to Table of Contents
27
Canadian ICES Statements
IC: 3879A-2390 & 3879A-2391
This device complies with ICES-003 and RSS-210 of Industry Canada. Operation is subject to the
following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation
of the device.
Ce dispositif est conforme aux normes NMB003 et CNR-210 d’Industrie Canada.
1. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
2. il ne doit pas produire de brouillage et l’utilisateur du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is
intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to licensing and not supported by Elite 800X RX & TX
Models.
RF Radiation Exposure & Hazard Statement
To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location
such that the antenna of the device will be greater than 2 cm (0.8 in.) away from all persons. Using higher gain
antennas and types of antennas not covered under the IC certification of this product is not allowed. Installers
of the radio and end users of the product must adhere to the installation instructions provided in this manual.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Exposition aux radiations RF & Mention de danger
Pour assurer la conformité avec les exigences RSS-102 d’exposition aux RF (Radio Fréquences), cet appareil
doit être installé dans un endroit ou l’antenne de l’appareil sera située à une distance de plus de 2 cm (0.8
po) de toutes personnes. L’utilisation d’antennes à gain plus élevé et les types d’antennes qui ne sont pas
couverts en vertu de la certification IC de ce produit n’est pas autorisée. Les installateurs de la radio et les
utilisateurs du produit final doivent se conformer aux instructions d’installation fournies dans ce manuel. Cet
émetteur ne doit pas être co-implanté ou exploité en conjonction avec toute autre antenne ou transmetteur.
Deployment Statement
This product is certified for indoor deployment only in the 5150 – 5250 MHz band. Do not install or use this
product outdoors in that frequency band in Canada.
Déclaration de déploiement
Ce produit est certifié pour le déploiement à l’intérieur tout en rencontrant les limites de cette bande de
fréquences: 5150 - 5250 MHz. Ne pas installer ou utiliser ce produit à l’extérieur au Canada, si cette bande
de fréquences ne peut ne peut être rencontrée
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling
of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in
a manner that protects human health and the environment. For more information about where you can drop off your
waste for recycling, please contact your local authority, or where you purchased your product.
Go to Table of Contents
28
European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union
and the European Fair Trade Association. These countries, listed below, are referred to as The European
Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,,
GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS,
POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND,
LICHTENSTEIN, NORWAY, SWITZERLAND
The Elite 800X RX & TX devices communicate with each other to provide wireless local area networking
(WLAN) capabilities. Additionally, the Elite 800X RX device has a BT radio transceiver for communicating
with users over the internet connection provided in the host platform. The Elite 800X TX Model includes
one 802.11a radio with one 802.11a omni-directional internal antenna. The Elite 800X RX Model includes
one 802.11a radio and one 2.4 GHz BT radio with two 802.11a and one 2.4 GHz BT omni-directional internal
antennas, respectively.
Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the R&TTE Directive of the European
Union (1999/5/EC). This equipment meets the following conformance standards:
Safety: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 (T-Mark License)
IEC 60950-1: 2005 (2nd Edition) + Am 1: 2009 (CB Scheme Report/Certificate),
EN 50332-1: 2000, EN50332-2: 2003
Also Licensed for Standards:
UL 60950-1: 2007 R12.11, CAN/CSA-C22.2 No. 60950-1-07 + A1: 2011
Additional licenses issued for specific countries available on request.
EMC: EN 55022: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 v2.1.1 (2009-05)
EN 61000-4-2: 2009, EN 61000-4-3: 2010, EN 61000-4-8: 2010
The products are licensed, as required, for additional country specific standards for the International
Marketplace. Additional issued licenses available upon request.
Radio: EN 300 328 v.1.7.1 (2006-10) & EN 301 893 v.1.6.1 (2011-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data
transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques and
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN. Certifications are harmonized
to the EN standards covering essential requirements under article 3.2 of the R&TTE Directive. Compliance
includes testing with antennas as specified in attached table.
SAR: EN 62311: 2008
Environmental: Low Voltage Directive 2006/95/EC, RoHS 2011/65/EU, WEEE 2012/19/EU EN 71-3: 2013
REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC
Go to Table of Contents
29
Bulgaria: С това, Turtle Beach обявява, че този модел на радио на ELITE 800X RX & TX, е със съгласие с
съществените изисквания и други важни условия на директива 1999/5 на европейски съюз
Czech Republic: Turtle Beach tímto prohlašuje, že tento ELITE 800X RX & TX, je ve shodì se základními požadavky a
dalšími pøíslušnými ustanoveními smìrnice 1999/5/ES.
Denmark: Undertegnede Turtle Beach erklærer herved, at følgende udstyr ELITE 800X RX & TX, overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
English: Hereby, Turtle Beach declares that this ELITE 800X RX & TX, is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Estonia: Käesolevaga kinnitab Turtle Beach seadme ELITE 800X RX & TX, vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Finland:
Turtle Beach vakuuttaa täten että ELITE 800X RX & TX, tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
France: Par la présente Turtle Beach déclare que l’appareil ELITE 800X RX & TX, est conforme aux exigencies essentielles
et aux autres dispositions pertinentes de la directive 1999/5/CE.
German: Hiermit erklärt Turtle Beach., dass sich das Gerät ELITE 800X RX & TX, in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Greece:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Turtle Beach.ΗΛ.ΝΕΙ ΟΤΙ ELITE 800X RX & TX, ΣΥΜΜΟΡΦ.ΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙ..ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ
ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ .ΙΑΤΑΞΕΙΣ ΤΗΣ Ο.ΗΓΙΑΣ 1999/5/ΕΚ.
Hungary: Alulírott, Turtle Beach nyilatkozom, hogy a ELITE 800X RX & TX, megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Italy: Con la presente Turtle Beach dichiara che questo ELITE 800X RX & TX, è conforme ai requisiti essenziali ed alle alter
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latvia: Ar šo Turtle Beach deklarç, ka ELITE 800X RX & TX, atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un citiem ar
to saistîtajiem noteikumiem.
Lithuania: Šiuo Turtle Beach deklaruoja, kad šis ELITE 800X RX & TX, atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Malta: Hawnhekk, Turtle Beach., jiddikjara li dan ELITE 800X RX & TX, jikkonforma mal-tiijiet essenzjali u ma
provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Netherlands: Hierbij verklaart Turtle Beach dat het toestel ELITE 800X RX & TX, in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Poland: Niniejszym Turtle Beach ooewiadcza, ¿e ELITE 800X RX & TX, jest zgodny z zasadniczymi wymogami oraz
pozosta³ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Go to Table of Contents
30
Portugal:
Turtle Beach declara que este ELITE 800X RX & TX, está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Romania: Astfel, Turtle Beach declarã acel acest ELITE 800X RX & TX, este în conformitate cu cerinþele necesare ºi
proviziile alte semnificative de Directive 1999 5 EC.
Slovakia: Turtle Beach týmto vyhlasuje, že ELITE 800X RX & TX spåòa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Slovenia: Turtle Beach izjavlja, da je ta ELITE 800X RX & TX, v skladu z bistvenimi zahtevami in ostalimi relevantnimi
doloèili directive 1999/5/ES.
Spain: Por medio de la presente Turtle Beach declara que el ELITE 800X RX & TX, cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Sweden: Härmed intygar Turtle Beach att denna ELITE 800X RX & TX, står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Go to Table of Contents
31
LIMITED ONE YEAR WARRANTY FOR TURTLE BEACH PRODUCTS:
Voyetra Turtle Beach, Inc. (“VTB”) warrants to the original end-user purchaser (“Purchaser”) that the retail Turtle Beach hardware product herein
(“Product”) will be free of defects in materials and workmanship for a period of one year from the date of purchase by the Purchaser (“Warranty
Period”). Any Extended Warranty or Service Plans purchased through a Retail store are not honored by VTB. The Warranty refers to the repair/replacement of a defective product during this period and not a refund.
This limited warranty is extended only to the original Purchaser of a new product, which was not sold “AS IS”. It is not transferable or assignable to any
subsequent purchaser. This limited warranty is applicable only in the country or territory where the Product was purchased from an authorized VTB
retailer and does not apply to a Product that has been purchased as used or refurbished or was included as part of a non-VTB product.
WARRANTY SERVICE:
In the USA and CANADA Warranty Service is provided by our Turtle Beach USA offices and in all other Countries it is provided by our local International
Distributors when available. Refurbished/Recertified products are sold on an AS IS basis with a 90-day Warranty or less in accordance with each vendor’s policy.
VTB does not warrant uninterrupted or error-free operation of the Product and is under no obligation to support the Product for all computer operating
systems or future versions of such operating systems.
If a defect should occur during the Warranty Period, Purchaser must contact VTB to obtain a Return Merchandise Authorization (“RMA”) number on the
basis of the dated purchase receipt. Purchaser will be responsible for shipping costs incurred in returning the defective Product to an authorized VTB
service center, or to the repair facility located at VTB’s corporate headquarters. VTB will not be responsible for other products or accessories included
with the defective Product sent to VTB. The RMA number must be clearly indicated on the outside of the package. Packages without an RMA number
will be refused by VTB or its representatives and returned to sender at the sender’s expense.
In the event of a defect, Purchaser’s sole and exclusive remedy, and VTB’s sole liability, is expressly limited to the correction of the defect by adjustment, repair, or replacement of the Product at VTB’s sole option and expense. VTB owns all Products it has replaced and all parts removed from
repaired Products. VTB uses new and reconditioned parts made by various manufacturers in performing warranty repairs and building replacement
products. If VTB repairs or replaces a product, the original Warranty Period is not extended, however, VTB warrants that repaired or replacement parts
will be free from defects in material and workmanship for a period of thirty (30) days from the date of repair or replacement, or for the remainder of
the Warranty Period, whichever is greater.
This warranty does not apply to any Product that has had its serial number altered, removed or defaced, or any Product damage caused by shipping,
improper storage, accident, problems with electrical power, abuse, misuse, neglect, ordinary wear, acts of God (e.g. flood), failure to follow directions,
improper maintenance, use not in accordance with product instructions, unauthorized modification or service of the Product or damage resulting from
the use of the Product with hardware, software or other products not provided by or specifically recommended by VTB.
NOTES:
- Replacement Parts and accessories that are subject to “wear and tear” such as earpads, mic foam covers, talkback cables, etc. have a three (3)
month Warranty.
- Replacement Parts for Discontinued Products are sold on an AS IS basis, they are not supported and come with a 30 day Warranty.
THIS LIMITED WARRANTY IS PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. TO THE
EXTENT PERMITTED BY APPLICABLE LAW, VTB HEREBY DISCLAIMS THE APPLICABILITY OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR USE FOR THE PRODUCT. IF SUCH A DISCLAIMER IS PROHIBITED BY APPLICABLE LAW, THE IMPLIED WARRANTY IS
LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY.
IN NO EVENT SHALL VTB BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES, INCLUDING BUT
NOT LIMITED TO ANY LOST PROFITS, DATA, OR LOSS OF USE, ANY THIRD PARTY CLAIMS, AND ANY INJURY TO PROPERTY OR BODILY INJURY (INCLUDING DEATH) TO ANY PERSON, ARISING FROM OR RELATING TO THE USE OF THIS PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, TORT, OR STRICT LIABILITY, EVEN IF VTB HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty supersedes all prior agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein will modify these terms. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights, which vary from state
to state. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following the purchase of the Product.
Go to Table of Contents
32
EXCLUSIONS FROM LIMITED WARRANTY:
This Limited Warranty shall not apply and VTB has no liability under this Limited Warranty if the Turtle Beach Product:
- is used for commercial purposes such as “LAN, Call Centers” (including rental or lease);
- is modified or tampered with;
- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication, or other causes unrelated to
defective materials or workmanship;
- serial number is defaced, altered or removed;
- is not used in accordance with the documentation and use instructions; or
- is repaired, modified or altered by other than authorized repair centers.
- is no longer available because it was discarded.
Go to Table of Contents
33
For: Xbox One I Mobile*
Watch Turtle Beach product training videos at:
youtube.com/TurtleBeachVideos
Product support and warranty information:
TurtleBeach.com/support
© 2015 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights reserved. Turtle Beach, the palm tree logo, Voyetra, and Ear Force are either trademarks or registered
trademarks of VTB, Inc. AUDIO ADVANTAGE is a trademark of Turtle Beach, Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Bluetooth
is a trademark of Bluetooth SIG, Inc. Google Play is a trademark of Google Inc. Android is a trademark of Google Inc. For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Headphone:X is
a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. All other trademarks are the property of their respective owners. Actual product appearance may differ
from imagery.
This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement