Detection, Alarm Equipment & Emergency Lighting

Detection, Alarm Equipment & Emergency Lighting
Express
fire equipment limited.
Detection, Alarm Equipment
& Emergency Lighting
Contents
8W Bulkhead Emergency Light......................................................................................
02
8W Mains Bulkhead Emergency Light............................................................................
03
Recessed 8W Emergency Light.......................................................................................
04
Recessed 8W Mains Emergency Light.............................................................................
05
8W Mains Emergency Exit Box......................................................................................
05
8W Maintained Emergency Exit Box...............................................................................
06
Hanging Maintained Emergency Exit Sign.......................................................................
07
Hanging Mains Emergency Exit Sign..............................................................................
08
Twin Non-Maintained Emergency Spotlight with 20W Halogen Lamps..............................
09
LED Retro Fit Emergency Lighting Unit ..........................................................................
10
Push Button Temporary Fire Alarm..................................................................................
11
Disabled Toilet Alarm Remote Indicator............................................................................
12
Mains Reset Call Point...................................................................................................
13
Mains Conventional Optical Smoke Detector....................................................................
14
Mains Conventional Rate of Rise and Fixed Heat Detector.................................................
15
Puff Alert Cigarette Detector............................................................................................
16
01
8W Bulkhead Emergency Light
ELB01/ELB02
Legend Kit:
The optional Legend Kit that can be used
with both the ELB01, ELB02 and ELB04
Bulkhead Emergency Lights comprises of
4 individual stickers (shown below) which
can be used in combination to display any
exit sign.
Product order code: ELBLEG
The self-contained emergency lights comprise of a polycarbonate
base and diffuser with a screw-free gear tray of metal construction.
The unit is also fitted with a special air valve in the back box which
provides ventilation when exposed to high temperatures.
Features:
>
Polycarbonate
>
Screw-free
base and diffuser
gear tray
>
IP65
>
Self
adhesive legend kit available
and over-discharge protection
>
Over-charge
02
Model
ELB01 / ELB02
Non-Maintained / Maintained
Non-Maintained / Maintained
Input Voltage
220-240 AC
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz / 60Hz
Power
8W
Battery
Ni-Cd 2.4V 45Ah
Emergency Duration
3 Hours
Dimensions (mm)
Width: 345mm Depth: 106mm Width: 76mm
8W Mains Bulkhead Emergency Light
ELB04
Features:
>
Polycarbonate
>
Screw-free
base and diffuser
gear tray
>
IP65
>
Self
adhesive legend kit available (ELBLEG)
Model
ELB04
Input Voltage
220-240 AC 50Hz
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz
Power
8W
Dimensions (mm)
Width: 345mm Depth: 106mm Width: 76mm
03
Recessed 8W Emergency Light
ELB03/ELB05
Features:
>
Polycarbonate
diffuser
Mounted
>
Over-charge and over-discharge protection
>
Recessed
04
Model
ELB03 / ELB05
Non-Maintained / Maintained
Non-Maintained / Maintained
Input Voltage
220-240 AC
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz
Power
8W
Battery
Ni-Cd 2.4V 45Ah
Emergency Duration
3 Hours
Dimensions (mm)
Width: 420mm Depth: 145mm Width: 100mm
Recessed 8W Mains Emergency Light
ELB06
Features:
>
Polycarbonate
>
Recessed
diffuser
mounted
Model
ELB06
Input Voltage
220-240 AC 50Hz
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz
Power
8W
Dimensions (mm)
Width: 420mm Depth: 145mm Width: 100mm
8W Mains Emergency Exit Box
ELEB05
Features:
>
Polycarbonate
>
Robust
legend panel (as depicted)
steel box
Model
ELEB05
Input Voltage
220-240 AC 50Hz
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz
Power
8W
Dimensions (mm)
Width: 392mm Depth: 190mm Width: 61mm
05
8W Maintained Emergency Exit Box
ELEB04
Features:
>
Polycarbonate
legend panel (as depicted)
steel box
>
Over-charge and over-discharge protection
>
Robust
06
Model
ELEB04
Maintained
Maintained
Input Voltage
220-240 AC 50Hz
Lamp Type
T5 8W Fluorescent Tube
Mains Frequency
50Hz
Power
8W
Battery
Ni-Cd 2.4V 4.5Ah
Emergency Duration
3 Hours
Dimensions (mm)
Width: 392mm Depth: 190mm Width: 61mm
Hanging Maintained Emergency Exit Sign
ELH01/ELH02/ELH03
Features:
>
Available
in Chrome, White or Brass
frame
>
Polycarbonate legend
>
Robust steel ceiling mounted bracket
>
Over-charge and over-discharge protection
>
Aluminium
Model
ELH01 Chrome
ELH02 White
ELH03 Brass
Maintained
Maintained
Input Voltage
220-240 AC 50Hz
Lamp Type
5mm White LED x 14
Mains Frequency
50Hz
Power
4W
Battery
Ni-Cd 3.6V 0.6Ah
Emergency Duration
3 Hours
Dimensions (mm)
Main body: Width: 408mm Height: 208mm Depth: 52mm
Hanging chains: Height: 303mm
Top unit: Width: 408mm Height: 33mm
07
Hanging Mains Emergency Exit Sign
ELH04/ELH05/ELH06
Features:
>
Available
in Chrome, White or Brass
frame
>
Polycarbonate legend
>
Robust steel ceiling mounted bracket
>
Aluminium
08
Model
ELH04 Chrome
ELH05 White
ELH06 Brass
Input Voltage
220-240 AC 50Hz
Lamp Type
5mm White LED x 14
Mains Frequency
50Hz
Power
4W
Emergency Duration
3 Hours
Dimensions (mm)
Main body: Width: 408mm Height: 208mm Depth: 52mm
Hanging chains: Height: 303mm
Top unit: Width: 408mm Height: 33mm
Twin Non-Maintained Emergency Spotlight
with 20W Halogen Lamps
ELS01
Features:
>
Robust
steel housing
be top or bottom mounted
>
Over-charge and over-discharge protection
>
Can
Model
ELS01
Maintained
Non-Maintained
Input Voltage
220-240V AC 50Hz
Lamp Type
2 x 20W halogen lamps
Mains Frequency
50Hz
Power
2 x 20W
Battery
2 x 12V 7Ah SLA
Emergency Duration
3 Hours
Dimensions (mm)
Width: 310mm Depth: 325mm Width: 72mm
09
LED Retro Fit Emergency Lighting Unit
ELBLED
The Led Retro Fit Emergency Lighting Unit will fit virtually any 8 Watt emergency bulkhead
fitting (both maintained and non-maintained). The unit is supplied complete with
batteries in a ‘clip-in’ housing. It is easy to fit the new LED unit, just remove the old 8
Watt tube, remove the lampholders and clip the new LED unit onto the gear tray, connect
the mains cable and the job is complete. The unit complies with EN60598.22.
The units can be quickly and easily fitted and has an average life of 50,000 hours
compared with 9,000 for a conventional 8 Watt tube.
10
Model
ELBLED
Light Source
High output voltage White LED
Construction
Polycarbonate tray
Battery
4.8 Volt 900mA Nicad
Charge Current
50mA Nominal
Input Voltage
230 Volt AC +10% -6% 50Hz
Size
305mm x 60mm x 18mm
Push Button Temporary Fire Alarm
ESA6
The push button temporary fire alarm is activated by pressing the button fixed on the
front of the device. Once activated, the unit will sound and flash with a sound output
of 85 decibels. The units can be used as a standalone unit or up to 32 units can be
interconnected.
Features:
>
Standalone
or interconnect
up to 32 units
>
85 decibels @ 3 metres with a flashing strobe alarm.
Model
ESA6
Operating Voltage
8 x AA batteries (12V DC)
Average Current
10uA
Alarm Current
200mA
Sound Output
85 decibels @ 3 metres
Strobe Colour
Red
Operating Temperature
-10°C to + 50°C
Minimum Continuous Temperature
0°C
Maximum Humidity
95% RH Non Condensing
Alarm Activation
Manual (press button)
Reset
Manual (twist button)
Number of interlinked units
Up to 32
IP Rating
IP35
Size
Width: 230mm, Height: 230mm, Depth: 104mm
Weight (including batteries)
850g
11
Disabled Toilet Alarm Remote Indicator
DPTA01-06
Features:
>
Simple
3 wire operation for all field devices
panel supporting up to 4 zones
>
Simple maintenance and fault diagnosis
>
On board buzzer in both Control Panel and Remote Indicator
>
Zone LED indication on control specification
>
Full range of field devices available (i.e. pull cord, remote reset and remote indicator)
>
A technical user manual is available for these products
>
Control
The Disabled Persons Toilet Alarms System is available
as a single zone kit which can be expanded up to a
maximum of 4 zones (where one zone is typically used
for each individual toilet). The Disabled Person Toilet
Alarm System meets the requirements of BS8300.
Technical specification:
Mains Input Voltage
230VAC 50Hz/60Hz
Quiescent Standby Current
3mA DC (Buzzer Muted)
Maximum Overall Supply Current
250 mA DC (Maximum)
Product order codes:
12
Product Order Code
Product Description
DPTA01
Disabled Toilet Alarm 1 Zone Kit
DPTA02
Disabled Toilet Alarm Control Panel
DPTA03
Disabled Toilet Alarm Pull Cord
DPTA04
Disabled Toilet Alarm Remote Reset
DPTA05
Disabled Toilet Alarm Remote Indicator
DPTA06
Disabled Toilet Sticker
DPTA07
Disabled Toilet Alarm 2 Zone Kit
DPTA08
Disabled Toilet Alarm 3 Zone Kit
DPTA09
Disabled Toilet Alarm 4 Zone Kit
Mains Reset Call Point
HOY010
The Mains Reset Call Point is a unique
product that mimics the feel of breaking
glass but the call-point can be re-set and
re-used therefore improving environmental
efficiency. An activation indicator drops
into view at the top of the window after the
reset Call Point has been operated. The
unit is then simply re-set with a key and
is ready for immediate re-use again. The
Reset Call Point is suitable for indoor use
only.
Applications:
The Reset Call Point is compatible with
most conventional fire alarms systems and
it is safe for use where glass cannot be
used e.g. food processing plants, kitchens
and swimming pools. As the unit can be
quickly and easily reset, it is ideal for use
in places that suffer from a high number
of activations such as schools, prisons,
shopping centres and other public places.
Features:
>
EN54-11
approved
for indoor use
>
Glass appearance maintains operator deterrence
>
Positive activation that mimics the feel of breaking glass
>
Visible warning flag confirms activation
>
Simple key to reset operating element (no broken glass)
>
Complete functional test with every activation
>
Suitable
Model
H0Y010
Current rating
3 Amps 12 – 24V DC
Low current rating
1-100 mA 5 – 12V DC
0.1 Amps 125 – 250v AC
Housing and Mounting Box Material
Polycarbonate
Electrical Contact Material
Silver Plated Brass
Operating Temperature
-20°C to +65°C
Installation Terminal Conductor Size
0.5mm – 2.5mm
Mounting
Flush or surface with back box
IP Rating
IP32
Additional products for use with HOY010 Mains Reset Call Point:
HOY011
Mains Reset Call Point Flush Mount Bezel
HOY012
Mains Reset Call Point Cover (clear)
HOY013
Mains Reset Call Point Key
13
Mains Conventional Optical
Smoke Detector
SD010
The Mains Conventional Optical Smoke
Detector uses a pulsing IR LED and
photodiode to detect IR scatter caused by
smoke entering the chamber. The detector
is particularly suitable for detecting optically
dense smoke, involving materials such as
soft furnishings, PVC, plastic, foam and
all similar materials which produce small
visible particles (from 0.5 to 10μm). The
detector is supplied complete with an extra
LED to improve detector identification in an
alarm condition.
The detector will work with most modern
fire alarm control panels and comes
supplied with a locking grub screw to
prevent unauthorised head removal.
Features:
>
Designed
to meet EN54 requirements
design
>
Dual LEDs for 360° visibility
>
Lockable base to stop unauthorised removal
>
Attractive
Model
SD010
Detector Class
Optical Smoke
Design Standard
EN54 Part 7
Approval
DIFT
Operating Voltage
9-33V DC
Quiescent Current
65μA
Alarm Current @ 24V DC
53mA MAX
Operating Temperature
-10°C to +50°C
Minimum Continuous Temperature
0°C
Maximum Humidity
95% RH non-condensing
Alarm Condition
2.4% obscuration per metre
Coverage
100m2
IP rating
IP43
Start-up Time
10 Seconds
Size: without base/with base
100mm x 37mm / 101mm x 53mm
Weight: without base/with base
95g / 153g
Additional products for use with Mains Conventional Optical Smoke Detector SD010:
14
SD012
Conventional Diode Base
Mains Conventional Rate of Rise and
Fixed Heat Detector
SD011
The Rate of Rise and Fixed Heat Detector
uses a thermistor arrangement to sense
a quick rise in temperature and also
a final threshold temperature of 57°C.
The detector has a single thermistor
arrangement that gives an alarm at a
temperature of 90°C. The detector has an
extra LED to improve detector identification
in alarm conditions.
The detector will work with most modern
fire alarm control panels and comes
supplied with a locking grub screw to
prevent unauthorised head removal.
Features:
>
Designed
to meet EN54 requirements
to base to stop unauthorised removal
>
Remote LED output
>
Dual LEDs for 360° visibility
>
Lockable
Model
SD011
Detector Class
Rate of Rise and Fixed Heat Detector
Design Standard
EN54 Part 5
Approval
DIFT
Operating Voltage
9-33V DC
Quiescent Current
40μA
Alarm Current @ 24V DC
34mA
Operating Temperature
-10°C to +50°C
Maximum Continuous Temperature
0°C
Maximum Humidity
95% RH non-condensing
Alarm Condition
Rate of rise or fixed heat trigger @ 57°C
Coverage
50m2
IP Rating
IP43
Start-up Time
10 Seconds
Size: without base/with base
100mm x 48mm / 101mm x 64mm
Weight: without base/with base
75g / 133g
Additional products for use with Mains Rate of Rise and Fixed Heat Detector SD011:
SD012
Conventional Diode Base
15
Puff Alert Cigarette Detector
CD01
Features:
>
3
sensitivity settings
facility
>
LED & Piezo alarm warnings
>
Alarm silence button
>
Auto resetting alarm when smoke clears
>
Choice of fast or slow pattern for alarm tone
>
Test button
>
Low battery warning
>
Detector attaches to mounting plate for ease of installation
>
Locking peg to deter unauthorised removal
>
Remote indicator included
>
5 year lithium battery included
>
Interconnection
The Puff Alert Cigarette Detector has a remote indicator which is hardwired to
the detector and is typically installed in an alternative location such as above
the no smoking room or in a manager’s office. The remote indicator will sound
& flash should the cigarette detector be triggered. Both the detector & remote
indicator are supplied with integral 5 year guaranteed lithium battery.
Technical specification (CD01 only excluding LED indicator):
16
Operating Voltage
9V DC
Quiescent Current
7μA
Alarm Current
35mA Max
Alarm Output
85dB @ 1 metre
Alarm Reset
Will reset when the smoke clears
Alarm LED Colour
Red
Operating Temperature
-4°C to +50°C
Minimum Continuous Temp
0°C
Maximum Humidity
95% RH Non Condensing
IP Rating
IP43
Size
Diameter: 105mm, Depth: 50mm
Weight
177grams (including battery)
CD01
Stand Alone Puff Alert Cigarette Detector and Remote Indicator
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement