LU WP 21/32 en - Support Sagemcom
BE
P
F O A N R O Y S U * YO
D V O
A R E C ID U B S C U M
Q T H A L ER R
R U
U
A E S L W ’S C N E I B E S T
RT E
T
E R F E A I T ALL W O TO
LY AT I N ER R
K
F E U R G DIS
E E S S E PL
IS W R A
PA I L V I C Y
YA L E S
BL WO
E. RK
.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
This equipment is not designed for making emergency telephone calls when the power fails.
Alternative arrangements should be made for access to emergency services.
This product is intended for connection to analogue public switched telephone networks
and private switchboards in the United Kingdom and Eire.
BT On-Air 2250 Classic
Digital Cordless Telephone Answering Machine
User
Guide
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
At a glance
In Use
Shows that the handset is in use.
Handsfree
Handset
Indicates when handsfree mode
is active.
Display
In range
Battery
Indicates that you are in range of
the base station.
Shows the status of the handset
battery. When the battery is fully
charged, the icon is completely
shaded. As the battery is used,
the shaded area is reduced.
Internal (Intercom) Call
Displayed during a call with
another handset (an internal call).
Silent mode
Displayed when the handset
ringer has been switched off.
Incoming calls will not cause the
handset to ring.
-1INT
EXT
Recall Intercom Directory
Directory
External Call
C
Allows quick access to your
phonebook without having to go
via the menu.
OK
Displayed during an external call.
New messages
Indicates that you have
new messages.
1
G HI
Recall
For use with Switchboards and
Select Services.
Clear/Secrecy
4
PQRS
7
DEF
ABC
2
3
MNO
JKL
5
6
WXYZ
T UV
8
9
0
OK button
To confirm settings.
Green phone/Handsfree
Keypad
Up/Down
Lets you move through the
options and lists and enter the
menu structure.
Red phone
To end a call and turn the power off.
Base
Intercom
Enables internal calls and call
transfer between handsets.
To answer a call and switch the
power on. When on a call, allows you
to use handsfree. Also, press and
hold to enter the redial and calls list.
When accessing the Menu,
allows you to clear or return
to the previous menu.
Allows you to talk to someone in
the same room without your caller
being able to hear the conversation.
Stored messages
Indicates that you have old
messages stored.
Play button
Speaker
Answer button
Skip buttons
Allows you to skip backwards and
forwards through your messages.
Skip forward can also be used to
page handsets.
Play
let
De e
Switches the answering machine
on and off.
swer
An
p Skip Ski
Delete button
BT On-Air 1250
To delete unwanted messages.
1
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Quick Guide to the
Menu Structure
Page number
1 PHONE BK
11 NEW
11
(Directory)
12 EDIT
12
13 DELETE
12
21 DELETE
11
22 TIME
11
31 MELODY
14
32 VOLUME
14
33 SILENT
14
34 BEEPS
14
2 CALLS
3 RING
4 ANSWER
41 PLAY
OUT MSG
42 DELETE
43 RECORD
6 BASE
20
ANSWER
20
24
OUT MSG
20
24
MESSAGES
ANSWER REC
18
ANSWER
19
22
44 OFF
5 SET
ANSWER REC
MESSAGES
OUT MSG
45 ON
23
MESSAGES
ANSW REC
22
ANSWER
22
51 LANGUAGE
15
52 END CALL
15
61 REGIST
AUTO
29
CUSTOM
30
62 PRIOR
16
63 PARAM
15
Important
If you make a mistake you can return to the previous menu by pressing the C (clear) button. If you keep
pressing the C (clear) button you will return to the idle screen.
2
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
In this guide
Note
There is a detailed Index at the back of this guide, please see page 39.
At a glance
1
Quick guide to the
menu structure
2
Introduction
4
Unpacking your BT On-Air 2250 Classic
For your records
Safety information
Setting up
Answering machine modes
To record your outgoing message (OGM)
Switch on and off
Playing your messages
Answering machine operation
during message playback
Call screening
VIP
4
4
4
5
Plan the location
5
Using the telephone
8
Making and ending calls
Call timer
Handsfree
Secrecy
Redial
Caller Display
Calls list
Call Waiting
Name and number directory
Paging handsets
Internal calls
Transferring calls
Handset settings
Base settings
Using the answering machine
8
8
9
9
9
10
10
11
11
13
13
13
14
15
Remote access
Switch answering machine on
from another external telephone
Answering machine control functions
18
18
18
22
23
24
25
25
27
28
28
Using additional handsets and bases
29
Registering additional handsets
To de-register a handset from the base
29
31
General information
Guarantee
Technical information
Switchboard compatibility
Recall
Switchboard external line access code
32
32
32
33
33
34
Wall mounting
36
Index
39
Helpline
If you experience any difficulties using your On-Air 2250 Classic, please call the BT On-Air Helpline
on 0870 240 4682.
3
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Introduction
Unpacking your BT On-Air
2250 Classic
If anything is missing, please contact your place
of purchase immediately.
For your records
Date of purchase:
Place of purchase:
One BT On-Air 2250 base.
One BT On-Air 2000 Classic handset.
One power supply for base station.
Serial number:
One telephone line cord.
For guarantee purposes proof of purchase is
required so please keep your receipt.
One NiMH rechargeable battery installed pack
and battery compartment cover.
Enter your System Code here.
One handset belt clip.
Three removable handset fascias.
Self adhesive label.
Four rubber feet.
The pre-set System Code number is 0000.
See page 15 for information on your System
Code.
Safety information
General
Only use the power supply included with the product. Using
an unauthorised power supply will invalidate your guarantee and
may damage the telephone. The item number for the mains
power supply is 872101.
Do not open the handset or base station. This could expose you
to high voltages or other risks. Contact the helpline for all repairs.
The product may heat up when the batteries are being
recharged. This is normal. However, we recommend that you
do not place the product on antique/veneered wood to avoid
damage.
Radio signals transmitted between the handset and base may
cause interference to hearing aids.
Do not stand your product on carpets or other surfaces which
generate fibres, or place it in locations preventing free flow of
air over its surfaces.
It is recommended that advice from a qualified expert be sought
before using this product in the vicinity of emergency/intensive
care medical equipment.
Do not submerge any part of your product in water and
do not use it in damp or humid conditions, such as in
bathrooms.
It is recommended that if you have a pacemaker fitted you check
with a medical expert before using this product.
Do not expose your product to fire, explosive or other
hazardous conditions.
Never dispose of batteries in a fire. There is a serious risk of
explosion and/or the release of highly toxic chemicals.
There is a slight chance that your phone could be damaged by
an electrical storm. We recommend that you unplug the power
and telephone line cord for the duration of the storm.
Cleaning
Simply clean the handset and base station with a damp
(not wet) cloth, or an antistatic wipe. Never use household
polish as this will damage the product. Never use a dry cloth
as this may cause a static shock.
4
Environmental
Do not expose to direct sunlight.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Setting up
Please note that your handset is already
registered to the base station.
Plan the location
Situate your product close enough to the
telephone and mains power sockets so that the
cables will reach. The only way to disconnect
the product from the power supply is to remove
the power adaptor from the mains power socket.
Therefore you must ensure you plan the location
so that the mains power is easily accessed.
Make sure it is at least 1 metre away from other
electrical products to avoid interference.
Do not situate the product in the bathroom or
other humid areas.
1
WARNING
Please take care that the power supply and
telephone line cord are connected to the
correct sockets as incorrect placement could
damage your equipment.
Once connected, put the plinth back on the
base to prevent it from rocking on the table.
There are two positions for the plinth when
joining it to the base, both can be used for desk
mounting and one for wall mounting. Position
A is for desk mounting only and position B is for
desk or wall mounting (see Wall mounting on
page 36).
A
Connect the power supply and
switch on.
B
Important
You must thread the power supply cable into
the socket on the underside of your base. The
power cable connector and socket are
coloured red.
Rubber feet
Hold the black plastic square between thumb
and forefinger and peel off individual feet from
backing sheet as shown. These are to stop your
base from moving and to protect your work
surface.
If you decide on position B, place 2 of the
rubber feet on the plinth and 2 on the base.
PLINTH
5
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Plug the power adaptor into the wall socket and
switch on. When the power is switched on, the
button on your base will light up.
When the battery has been charged for at least
16 hours the display will show the
symbol;
you can then connect the telephone line cord to
the base.
WARNING
Do not connect the telephone line cord to the
phone socket until your handset is fully charged.
This will prevent the risk of the phone being
answered before the battery is charged.
Answering the phone before the battery is fully
charged may prevent it from reaching its
optimum capacity.
2
Charge the battery in the
handset for at least 16 hours
Empty
13
/
23
/
Full
Battery low warning
If the handset battery symbol is empty and you
hear warning beeps, you will need to recharge
your handset before you can use it.
Battery performance
WARNING
Under no circumstances should
non-rechargeable batteries be used. Only use
the approved batteries. Using unapproved
batteries will invalidate your guarantee and
may damage the telephone.
Under ideal conditions the battery should give
about 10 hours talk time and 120 hours
standby when the batteries have been fully
charged.
Fully discharging the batteries at least
once a week will help them to last as long as
possible. However, the charge capacity of
rechargeable batteries will reduce with time
as they wear out, so reducing the talk/standby
time of the handset. Eventually they will need
to be replaced. New batteries can be obtained
from the Helpline on 0870 240 4682.
6
Your handset is supplied with NiMH
batteries. These need to be initially charged
continuously for 16 hours to reach full
charge.
Note that the battery charge icon does not
indicate the correct level when the batteries
are first installed. The batteries must first be
fully charged.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To replace the handset battery
5
Attach the belt clip
If you need to replace the handset battery,
slide off the battery cover. Remove the old
battery by disconnecting the small plug inside
the battery compartment.
Connect the plug of the new battery.
Slot
Replace the battery cover.
Please pay attention not to damage the
charging contacts on the handset.
3
Connect the telephone line cord
(after charging your handset)
Plug the line cord into the telephone wall socket.
4
Fit the belt clip onto the back of the handset.
Helpline
If you experience any difficulties setting up or
using your BT On-Air 2250 Classic, please call
the BT On-Air Helpline on 0870 240 4682.
Changing your handset fascias
There are 3 removable handset fascias to
choose from. Simply slide the fascias off and
replace with another.
7
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Using the telephone
To switch the handset power on
and off
Press and hold the GREEN PHONE
button until after the display check
sequence has happened and only the
battery icon is displayed.
If you release the button before this
has happened the handset will remain
switched off.
Call timer
Your handset will automatically time the duration
of all external calls. The handset display shows
the call duration both during your call and for a
few seconds after it is completed.
To end a call
Press the RED PHONE button.
Press and hold the RED PHONE button
to switch the handset off.
To receive a call
Making and ending calls
Press the GREEN PHONE button to
answer the call.
To make an external call
Press the GREEN PHONE button.
The display shows the
symbol.
To adjust the earpiece volume
You can adjust the volume during a call.
Dial the number.
Preparatory dialling
First enter the number to be dialled.
The number is shown in the display.
(If you make a mistake press C to
remove the incorrect digit).
If you have entered the number
correctly, press the GREEN PHONE
button to dial the number.
8
▲
Press the UP button to increase the
volume.
▼
Press the DOWN button to decrease
the volume.
The display shows the current volume
level.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Note
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
Secrecy
When on a call you can talk to someone in the
same room, without your caller hearing.
To switch secrecy on/off
C
OK
C
OK
Handsfree
Handsfree allows you to talk to your caller
without holding the handset.
During a call, press the C button.
C will now flash to show it is in
operation.
Press the C button again to resume
your call.
To use handsfree
Redial
During a call you can switch to
handsfree mode.
Whilst on a call press the GREEN
PHONE button.
When handsfree is active you see the
symbol flashing
Your handset automatically saves up to 20
telephone numbers dialled and received into
a Calls list.
Calls list
To switch handsfree off, press the
GREEN PHONE button again.
▲
▼
Press and hold the GREEN PHONE
button.
To adjust the volume use the UP or
DOWN button to increase or decrease
the volume.
Note
When you end your call the handsfree volume
will return to the default setting of volume
level 2.
The display will show CALLS and then
the last number that was dialled or
received.
▲
▼
Use the UP or DOWN button to scroll
to the number you require.
Press the GREEN PHONE button to
dial the number.
Note
Helpline
To delete the Calls list, see page 11.
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.
9
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Caller Display
Important
go with the number in your handset directory,
the name will be displayed instead. If you
receive more than one call from the same
telephone number then it will only appear once
in the list.
To use Caller Display or Call Waiting you
must first subscribe to the service from your
Network Provider. A quarterly fee is payable.
If a call is received when the Calls list is full,
then the oldest entry will be deleted
automatically.
For more information on BT Select Services
call BT free on 0800 800 150.
If no number is received for a call then no entry
will appear in the Calls list.
If you have subscribed to a Caller Display
Service you can see who is calling you on your
handset display, (unless the number has been
withheld).
To view and dial a number in the
Calls list
Press and hold the GREEN PHONE
button. The display will show CALLS.
Important
The most recently received or dialled
number will be displayed.
The Caller Display Service will not operate
when your base station is connected to a
switchboard.
Whether you take a call or not, the caller’s
details are stored in the Calls list. The Calls
list holds the telephone numbers of the last 20
people who called you.
▼
Press the DOWN button to scroll
backwards through the Calls list
towards the older calls in the list.
▲
Press the UP button to scroll forwards
through the Calls list towards the most
recent calls.
You can display, scroll through and dial
numbers on the list.
When you receive a call the caller’s number will
appear on the display. If the caller has withheld
their number then ------------- will appear on the
display. If for some reason the caller’s number
is not available then
will
appear on the display.888888888888
When the number you wish to call is
displayed, press the GREEN PHONE
button. The number will be dialled
automatically.
C
OK
Press the C button to exit.
Note
Calls list
The Calls list contains both the telephone
numbers of the people who have called you and
the telephone numbers that you have dialled.
The Calls list holds 20 telephone numbers and
they are stored in the order they were either
received or dialled. If you have stored a name to
10
If you press the OK button when a number
in the Calls list is displayed you will see the
time and date of the call.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To delete all numbers shown in the
redial and calls list
▼
Press the DOWN button until CALLS is
displayed.
C
OK
C
OK
C
OK
To use Call Waiting
Recall
Press the OK button. The display will
show DELETE.
Press the OK button to confirm. The
display will show DONE. All numbers in
the redial and calls list have been
deleted.
Recall
C
Press the C button twice to exit.
If you wish to disconnect the first call
press the RED PHONE button after
speaking to the first caller.
▼
C
The second caller will only be charged
for their call from the moment you
answer and not while they are waiting
for your initial contact.
Press the OK button to confirm.
Press the DOWN button until TIME is
displayed.
OK
Press the OK button to confirm.
The length of the last call will be shown
on the display.
C
The handset will then ring. Press the
GREEN PHONE button again and
continue with the second caller.
Press the DOWN button until CALLS is
displayed.
OK
OK
When you have spoken to the second
caller you can return to the first caller
by pressing the RECALL button again.
You can switch back and forth between
the two calls without disconnecting
either if you wish.
To view the length of the last call
▼
You can answer the second call,
without disconnecting your first caller,
by pressing the RECALL button. The
first caller will be put on hold.
Press the C button twice to exit.
50 Name and number directory
You can store up to 50 of your most frequently
used names and numbers.
Quick guide to directory settings menu
1 PHONE BK
Call Waiting
If an incoming call arrives while you are already
engaged on a telephone call, you will hear a soft
beep every 5 seconds (this beep is not audible
to the person you are speaking to).
Instead of the engaged tone, the second caller
will hear an announcement to hold on as you
are aware that there is a second call.
11 NEW
12 EDIT
13 DELETE
To store a name and number in
the directory
▼
C
Press the DOWN button until PHONE BK
is displayed.
OK
Press the OK button to confirm.
11
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
▼
Use the DOWN button to scroll to NEW.
C
OK
To edit directory numbers
Press the OK button to confirm.
Enter the name using the letters on
the keypad.
Entering names
Use the keypad letters to enter names
by using a long press of the button,
i.e. if you press and hold the 8 button
the following characters appear,
T, U, V. You can enter names of up to
8 characters.
▲
▼
C
8
MNO
6
To enter the letter T, press 8 the cursor
will automatically move to the right and
display the next chosen letter.
C
C
OK
OK
▲
▼
C
OK
C
OK
C
OK
OK
Press the OK button to confirm.
Use the C button to delete numbers or
letters.
Edit the entry using the
numbers/letters on the keypad.
C
OK
C
OK
Press the OK button to confirm.
Enter the telephone number you want
to store.
Press the OK button to confirm.
Use the UP or DOWN button to find
the entry you want to amend.
To enter the M, press 6.
If you enter a digit incorrectly you can
delete it by pressing the C button.
Press the OK button to confirm.
Use the UP or DOWN button to scroll
to EDIT.
To enter O, press 6 and hold.
MNO
6
C
OK
▲
▼
For example, if you wish to store the
name TOM:
TUV
Press the DOWN button until PHONE BK
is displayed.
Press the OK button to store the
new entry.
The display will then show DONE.
Press the C button twice to exit.
Press the OK button to confirm.
The display will then show DONE.
C
OK
To delete directory numbers
Press the C button twice to exit.
▲
▼
To dial a number from the directory
C
Directory
▲
▼
TUV
8
Press the DIRECTORY button to enter
the directory.
Use the UP or DOWN button to find
the entry you want to dial.
Or
To search alphabetically, press the
relevant keypad number, for example
to find TOM, press the 8 button and
scroll through the entries under T.
Press the GREEN PHONE button to
dial the number.
12
Press the UP or DOWN button until
the display shows PHONE BK.
OK
▼
C
Press the DOWN button until the
display shows DELETE.
OK
▲
▼
C
Press the OK button.
Press the OK button.
Use the UP or DOWN button to select
the name and number you want to
delete.
OK
Press the OK button to delete.
The directory name and number has
been deleted.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Or
The display will show OK. (If there are
no numbers in the directory to delete
the display will show EMPTY).
C
OK
Enter the digit ✱ if you want to call all
the handsets.
Press the C button twice to exit.
Press the RED PHONE button to
disconnect the call.
Helpline
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.
Transferring calls
You can transfer an external call to another
handset registered to the base.
Paging handsets
To transfer an external call
between handsets
You can alert handset users that they are
wanted, or locate a missing handset. (Paging
calls cannot be answered by a handset.)
While on an external call:
To page a handset from the base
Skip Press the Skip button on the base.
All handsets registered with the base
and switched on will ring.
To end paging, press the button again.
Or
Press the RED PHONE button on
any handset.
C
OK
Press the OK button.
Enter the number of the handset to
which you want to transfer the call.
Press the GREEN PHONE button to
transfer the call.
If you wish you can talk to the other
handset user first.
Press the RED PHONE button to
disconnect the call.
Internal calls
If you have multiple handsets registered to a base
you can make internal calls between handsets.
To make an internal call to another
handset
Intercom
Press the INTERCOM button.
Enter the number of the handset you
want to call.
13
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Handset settings
Silent ring
Quick guide to handset settings menu
3 RING
31
32
33
34
MELODY 5 SET
VOLUME
SILENCE
BEEPS
Ringer melody
▲
▼
▲
▼
51 LANGUAGE
52 END CALL
C
OK
C
OK
C
OK
▲
▼
Press the OK button.
Use the UP or DOWN button to select
either OFF or ON.
The display will show the
indicate a silent ring.
C
OK
C
OK
Press the OK button.
Use the UP or DOWN button to select
the melody you require.
Press the OK button.
Press the DOWN button until the
display shows SILENT.
Press the OK button.
The display will show MELODY.
▲
▼
OK
▼
Press the UP or DOWN button until
the display shows RING.
C
Press the UP or DOWN button until
the display shows RING.
symbol to
Press the OK button to confirm.
The display will show DONE.
Press the C button twice to exit.
There are 6 melodies to choose from.
C
OK
C
OK
Note
Press the OK button to confirm.
The display will show DONE.
When silent ring is switched on the handset
will not ring or emit any keypad beeps.
Press the C button twice to exit.
Ringer volume
▲
▼
C
Press the UP or DOWN button until
the display shows RING.
OK
▼
C
OK
▲
▼
Press the OK button.
Press the DOWN button until the
display shows VOLUME.
▲
▼
C
Keypad beeps
C
OK
Press the DOWN button until the
display shows BEEPS.
▲
▼
Use the UP or DOWN button to select
either OFF or ON.
C
OK
C
OK
Press the OK button to confirm.
14
OK
Press the C button twice to exit.
Press the OK button to confirm.
The display will show DONE.
The display will show DONE.
C
Press the OK button.
▼
Press the OK button.
Use the UP or DOWN button to select
the volume you require. There are 4
volume levels to choose from.
OK
Press the UP or DOWN button until
the display shows RING.
Press the C button twice to exit.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
▲
▼
Note
Please note that the melody and volume
are omitted from the handset only. For base
settings see page opposite.
To change the display language
▲
▼
C
Press the UP or DOWN button until
the display shows SET.
OK
▼
C
Press the DOWN button until the
display shows LANGUAGE.
OK
▲
▼
C
Press the OK button.
Press the OK button.
C
OK
C
OK
OK
System Code
Your base station has a default setting of 0000
but you may want to change this to prevent
unauthorised use of the handset.
If you change your System Code keep record
of the new number by writing it in the space
provided on page 4.
To change your System Code
▲
▼
Press the OK button to confirm.
Press the C button twice to exit.
C
Press the UP or DOWN button until
the display shows BASE.
OK
▼
To switch automatic end call
on or off
If you switch automatic end call ON
you can end a call by simply placing
the handset back on the base. This
means you won’t always have to press
the RED PHONE button to end a call.
▲
▼
C
Press the UP or DOWN button until
the display shows SET.
OK
▼
C
OK
C
Press the OK button.
Press the OK button.
Press the DOWN button until the
display shows PARAM.
OK
Press the OK button.
The display will show F1.
DEF
Press the 3 button.
1
Press the 1 button.
3
OLD
CODE
Enter the existing code (0000 if not
changed). As you enter each digit in
turn, the dash will stop flashing.
NEW
CODE
Four dashes will be shown on the
display. Enter your new System Code.
As you enter each digit in turn the
dash will disappear.
Press the OK button.
Press the DOWN button until the
display shows END CALL.
Press the C button twice to exit.
Base settings
The display will show DONE.
C
Press the OK button to confirm.
The display will show DONE.
Use the UP or DOWN button to select
the language you require (English,
German, Spanish, Italian, Dutch,
Portuguese or French).
OK
Use the UP or DOWN button to select
either OFF or ON.
CONFIRM
CODE
C
OK
Enter your new System Code again.
Press the C button twice to exit.
15
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
▲
▼
To change the base station ringer
volume
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
OK
Press the OK button.
Press the DOWN button until the
display shows PARAM.
OK
Press the OK button.
The display will show F1.
ABC
2
Press the OK button to confirm.
The display will show F281.
C
▼
C
C
Use the UP or DOWN button to select
the melody you require. The base will
play a sample melody on each press.
There are 21 melodies to choose from.
OK
Press the C button three times to exit.
Base station priority
If you are using multiple bases, you can select
which base your handset will use.
Press the 2 button.
TUV
8
Press the 8 button.
ABC
2
▲
▼
C
Use the UP or DOWN button to select
the volume. The base will play a sample
ring on each press. There are 6 volume
levels to choose from (no ringing, low,
to high).
OK
To change base station priority
Press the 2 button.
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▼
Press the OK button to confirm.
Press the DOWN button until the
display shows PRIOR.
The display will show F282.
C
OK
Press the C button three times to exit.
C
Press the OK button.
OK
Press the OK button.
The display will show NONE.
▲
▼
To change the base station ringer
melody
C
▲
▼
OK
▼
C
Press the OK button.
Press the DOWN button until the
display shows PARAM.
OK
Press the OK button.
The display will show F1.
ABC
2
TUV
16
OK
Press the UP or DOWN button until
the display shows BASE.
Press the 2 button.
8
Press the 8 button.
1
Press the 1 button.
Press the OK button to confirm.
The display will show DONE.
C
C
Use the UP or DOWN button to select
either NONE, 1, 2, 3 or 4.
OK
Press the C button twice to exit.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To view the date and time
▲
▼
C
▲
▼
Press the UP or DOWN button until
the display shows BASE.
OK
▼
C
To set the date
Press the OK button.
C
Press the OK button.
OK
▼
Press the DOWN button until the
display shows PARAM.
OK
Press the UP or DOWN button until
the display shows BASE.
C
Press the DOWN button until the
display shows PARAM.
OK
The display will show F1.
1
▼
C
OK
Press the OK button.
Press the OK button.
The display will show F1.
Press the 1 button twice.
1
Press the 1 button.
The display will show the current date.
3
DEF
Press the 3 button.
Press the DOWN button to display
the time.
The current date is displayed
i.e. 05 02 2002.
Press the C button three times to exit.
Enter the date.
C
OK
C
OK
Note
If you subscribe to a Caller Display Service
the time and date will be set automatically.
Press the C button to go back a digit
if you make a mistake and enter the
correct digit. (Please note that you
cannot change the 20 of 2002).
The display will show F13.
Press the C button twice to exit.
To set the time
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▼
C
Press the OK button.
Press the DOWN button until the
display shows PARAM.
OK
Press the OK button.
The display will show F1.
1
Press the 1 button.
ABC
Press the 2 button.
2
The current time is displayed.
Enter the time.
The display will show F12.
C
OK
Press the C button twice to exit.
17
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Using the answering
machine
Before using your answering machine for the
first time you need to: set the time and date
and switch the answering machine on.
Your BT On-Air 2250 comes with the
pre-recorded outgoing message (OGM) “Hello,
your call cannot be taken at the moment, so
please leave your message after the tone”.
You can use this outgoing message or record
your own.
Answering machine modes
To record your own Answer and
Record outgoing message (OGM)
▲
▼
C
OK
▲
▼
C
Use the UP or DOWN button to scroll
to RECORD.
OK
▲
▼
Use the UP or DOWN button to scroll
to OUT MSG.
C
OK
C
OK
Press the OK button to confirm.
Hold the handset to your ear. You will
hear, “Please record your message after
the tone”. After you hear a long beep in
the earpiece, speak your outgoing
message into the handset. Whilst you
record your message, REC is displayed.
C
OK
Press the OK button to end recording.
PLAY is displayed and your Answer and
Record outgoing message will be played
back through the handset earpiece
followed by a long beep.
To set the time and date
Once playback has finished DONE is
displayed then RECORD.
Please see page 17
18
Press the OK button to confirm.
ANSW REC is displayed.
Each answering machine mode has its own
outgoing message and you can record an
outgoing message in both modes, therefore,
please ensure that you switch on the correct
answer mode.
‘To set the time and date’
Press the OK button to confirm.
MESSAGE is displayed.
1 Answer and Record – Callers can leave
you a message.
The answering machine has an incoming
message capacity of approximately 12 minutes.
Press the OK button to confirm.
After a slight pause PLAY is displayed.
There are two types of answering machine
mode:
2 Answer Only – Callers will hear your
outgoing message but cannot leave you
a message.
Press the UP or DOWN button until
the display shows ANSWER.
C
OK
Press the C button twice to exit.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
PLAY is displayed and your Answer
Only outgoing message will be played
back through the handset earpiece
followed by a long beep.
The Answer button on the base will
come on to indicate that the answering
machine is in Answer and Record
mode.
Once playback has finished DONE is
displayed then RECORD.
Note
C
If you record a new outgoing message it will
overwrite the previous one.
To record your own Answer Only
outgoing message (OGM)
▲
▼
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
Press the OK button to confirm.
OK
Press the C button twice to exit.
The Answer button on the base will
flash to indicate that the answering
machine is in Answer Only mode.
Note
Once you have recorded your outgoing message
the answering machine will automatically
be switched on. Remember, if the last message
recorded was the Answer Only outgoing
message then the answering machine will be
on but callers will not be able to leave messages.
After a slight pause PLAY is displayed.
▲
▼
C
Use the UP or DOWN button to scroll
to RECORD.
OK
Press the OK button to confirm.
MESSAGE is displayed.
▲
▼
C
Helpline
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.
Use the UP or DOWN button to scroll
to OUT MSG.
OK
Press the OK button to confirm.
ANSW REC is displayed.
▲
▼
C
Use the UP or DOWN button to scroll
to ANSWER.
OK
Press the OK button to confirm.
Hold the handset to your ear. You will
hear, “Please record your message after
the tone”. After you hear a long beep in
the earpiece, speak your outgoing
message into the handset. Whilst you
record your message, REC is displayed.
C
OK
Press the OK button to end recording.
19
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To delete your own outgoing
message
To listen to your outgoing message
▲
▼
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
Important
Press the OK button to confirm.
Both your own Answer and Record and
Answer Only outgoing messages will be
deleted. The pre-recorded outgoing messages
(OGM) will be automatically restored when
your own outgoing messages are deleted.
After a slight pause PLAY is displayed.
C
OK
Press the OK button to confirm.
MESSAGES is displayed.
▲
▼
C
Use the UP or DOWN button to scroll
to OUT MSG.
OK
▲
▼
Press the OK button to confirm.
ANSW REC is displayed.
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
After a slight pause PLAY is displayed.
For Answer and Record:
C
OK
▼
Press the OK button.
PLAY is displayed and your Answer and
Record outgoing message will be
played back through the handset
earpiece followed by a long beep.
C
▲
▼
C
20
OK
▼
OK
OK
C
OK
Press the OK button to confirm.
DONE is displayed and then DELETE.
Your own Answer and Record and
Answer Only messages are deleted and
the pre-recorded outgoing messages
will be re-instated.
Press the OK button to confirm.
Press the C button twice to exit.
Press the OK button to confirm.
Use the DOWN button to scroll to OUT
MSG.
Use the UP or DOWN button to scroll
to ANSWER.
PLAY is displayed and your Answer
Only outgoing message will be played
back through the handset earpiece
followed by a long beep.
C
Use the DOWN button to scroll to
DELETE.
MESSAGES is displayed.
Or
For Answer Only:
Press the OK button to confirm.
C
OK
Press the C button twice to exit.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To adjust the number of rings
before the answering machine
switches on
▲
▼
C
To adjust the time allowed for
recording incoming messages
It is possible to adjust the time
available to leave a message. The
options are 30 seconds, 2 minutes, 4
minutes and unlimited message length.
The answering machine has a total
recording time of up to 12 minutes.
Press the UP or DOWN button until
the display shows BASE.
OK
Press the OK button to confirm.
REGIST is displayed.
▲
▼
C
▲
▼
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the OK button to confirm.
C
Press the UP or DOWN button until
the display shows BASE.
OK
REGIST is displayed.
After a slight pause F1 is displayed.
G HI
4
▲
▼
Press the 4 button twice.
Either:
C
▲
▼
C
OK
Press the UP or DOWN button to
scroll to the required number of rings,
between 2 and 5 and then press the
OK button to confirm.
Press the UP or DOWN button until
the display shows PARAM.
OK
After a slight pause F1 is displayed.
G HI
4
Press the 4 button.
DEF
3
Press the 3 button.
Enter the number using the keypad.
▲
▼
Press the UP or DOWN button to
scroll to the required message length:
1 = 30 seconds, 2 = 2 minutes,
3 = 4 minutes, 4 = unlimited length.
C
OK
C
OK
F44 is displayed.
OK
Press the OK button to confirm.
Or
If 1 (Time Saver) setting is chosen
there will be 4 rings if you have no new
messages, and 2 rings if there are new
messages.
C
Press the OK button to confirm.
Press the C button twice to exit.
Press the OK button to confirm.
F43 is displayed.
Press the C button twice to exit.
Note: Timesaver
If you call from another telephone and it
rings 4 times, there are no new messages.
If the call is answered after 2 rings there
are new messages to listen to.
21
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To switch the answering machine
on from the handset
▲
▼
C
To switch the answering machine
off from the handset
▲
▼
Press the UP or DOWN button until
the display shows ANSWER.
OK
Press the OK button to confirm.
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
After a slight pause PLAY is displayed.
After a slight pause PLAY is displayed.
▲
▼
▲
▼
Use the UP or DOWN button to scroll
to ON.
C
C
OK
Use the UP or DOWN button to scroll
to OFF.
OK
Press the OK button to confirm.
C
OK
For Answer and Record:
OK
C
OK
Press the C button twice to exit.
To switch the answering machine
on or off from the base
The Answer button on the base will
come on to indicate that the answering
machine is in Answer and Record
mode.
At the base:
To switch on Answer and Record
mode:
swer
An
For Answer Only:
▲
▼
C
Use the UP or DOWN button to scroll
to ANSWER.
OK
C
OK
22
To switch on Answer Only mode:
swer
An
Repeatedly press the ANSWER button
until it flashes green. You will hear,
“Answer Only”.
(Note that you must have recorded an
Answer Only outgoing message.)
Press the C button twice to exit.
The Answer button on the base will
flash to indicate that the answering
machine is in Answer Only mode.
Repeatedly press the ANSWER button
until it is illuminated green. You will
hear, “Answer on”.
(Note that you must have recorded an
Answer and Record outgoing message.)
Press the OK button to confirm.
PLAY is displayed and your Answer
Only outgoing message will be played
back through the handset earpiece
followed by a long beep. The display
shows ON.
Press the C button twice to exit.
The lit Answer button on the base will
go out.
Press the OK button to confirm.
PLAY is displayed and your Answer and
Record outgoing message will be
played through the earpiece followed
by a long beep. The display shows ON.
Press the OK button to confirm.
The handset earpiece gives a long beep
and the display shows OFF.
ANSW REC is displayed.
C
Press the OK button to confirm.
To switch the answering machine off:
swer
An
Repeatedly press the Answer button
until the green light goes off. You will
hear, “Answer off”.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Play
Playing your messages
To play all messages, press the Play
button again.
Incoming message indicator:
If you have new messages the Play button on
the base will flash red and a closed envelope
icon
will appear on the handset display.
At the end of message playback you
will hear, “End of messages”.
To play new messages from the
handset:
If there is one new message the Play button will
flash once.
Note
If there are two new messages the Play button
will flash twice rapidly.
When you play messages from the handset
the display will show the date and time the
message was left.
If there are three new messages the Play button
will flash three times rapidly.
If there are four new messages the Play button
will flash four times rapidly.
If there are five or more new messages the Play
button will flash five times rapidly.
▲
▼
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
After a slight pause PLAY is displayed
followed by the number of new
messages you have.
If you have old messages (ones you have
listened to) the Play button on the base will be
lit solid red and an opened envelope icon
appears on the handset display.
Your messages are automatically played
back to you. At the end of message
playback you will hear “End of messages”.
If you have no messages the Play button will
be lit solid green and there will be no envelope
icon on the handset display.
To play all old messages from the
handset:
▲
▼
Helpline
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.
Press the OK button to confirm.
Press the UP or DOWN button until
the display shows ANSWER.
C
OK
C
OK
C
OK
Press the OK button to confirm.
After a slight pause PLAY is displayed.
Press the OK button to confirm.
MESSAGES is displayed.
To play your messages
Play
To play your messages from the base:
Press the OK button to confirm.
Your messages are played back to you.
At the end of message playback you
will hear “End of messages”.
Press the Play button.
Any new messages will be
automatically played back through the
base loudspeaker.
23
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Answering machine operation
during message playback
C
OK
Press the OK button to confirm.
DONE is displayed and then DELETE.
You will hear, “All messages deleted”.
From
base
From
handset
Skip Skip to next message
Delete current message
Stop playback (press and hold)
S
G HI
kip
S
G HI
G HI
4
4
Play
JKL
5
To record a memo message
let
De e
1
Play
It is possible to record a message
directly on to the answering machine
as a memo, which can be played back
in the same way as other messages.
▲
▼
To delete all messages
C
Press the UP or DOWN button until
the display shows ANSWER.
OK
You can only delete all messages if
there are no new messages.
Press and hold the Delete button until
you hear a long beep. You will then
hear, “All messages deleted”.
▲
▼
Use the UP or DOWN button to scroll
to RECORD.
C
OK
C
OK
Press the UP or DOWN button until
the display shows ANSWER.
OK
Press the OK button to confirm.
C
OK
C
OK
After a slight pause PLAY is displayed.
▲
▼
C
Use the UP or DOWN button to scroll
to DELETE.
OK
Press the OK button to confirm.
MESSAGES is displayed.
24
Press the OK button to confirm.
Hold the handset to your ear. You will
hear, “Please record your message after
the tone”. After you hear a long beep in
the earpiece, speak your memo message
into the handset. Whilst you record your
message, REC is displayed.
At the handset:
C
Press the OK button to confirm.
MESSAGE is displayed.
All messages are automatically deleted.
▲
▼
Press the OK button to confirm.
After a slight pause PLAY is displayed.
At the base:
let
De e
Press the C button twice to exit.
When all messages have been deleted
the Play button on the base will be lit
solid green.
Skip
4
kip
Pause/Resume playback
OK
6
Go back to start of current message
Go back to previous message
All messages are automatically deleted.
C
MNO
Press the OK button to end recording.
DONE is displayed, and then RECORD.
Press the C button twice to exit.
The
icon is displayed on the
handset and the Play button on the
base flashes red.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Call screening
To use call screening
You can decide whether to listen to
incoming messages over the
loudspeaker and answer them or let
your answering machine take the
message.
Alternatively you can choose not to
hear the callers leaving messages.
VIP feature
When the answering machine is switched on,
this feature allows you to still receive calls on
your handset from privileged callers who you
have given the VIP code to.
When the VIP feature is switched on your
handset will not ring when a call is received.
When the caller hears the outgoing message
they can enter ✱ followed by your VIP code to
make your handset ring.
Call screening is off by default.
To set up and change the VIP
access code
You can intercept the call at any time
and speak to the caller by pressing the
GREEN PHONE button.
Note
To set up call screening
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▲
▼
▲
▼
Press the OK button to confirm.
REGIST is displayed.
C
You must change the code from the default
setting of 0000 for the VIP feature to work.
C
4
Press the 4 button.
JKL
Press the 5 button.
5
▲
▼
Press the OK button to confirm.
After a slight pause F1 is displayed.
G HI
C
C
OK
OK
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the OK button to confirm.
After a slight pause F1 is displayed.
4
Press the 4 button.
MNO
Press the 6 button.
6
Press the UP or DOWN button to
scroll to either 0 to switch call
screening off or, 1 to switch it on and
then press the OK button to confirm.
Enter your old four digit access code.
Enter your new 4 digit access code.
Or
Re-enter your new 4 digit access code.
Press 0 (off) or 1 (on) using the keypad.
F46 is displayed.
F45 is displayed.
C
Press the OK button to confirm.
G HI
Either:
▲
▼
OK
REGIST is displayed.
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the UP or DOWN button until
the display shows BASE.
C
OK
Press the C button twice to exit.
Press the C button twice to exit.
25
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To switch VIP on or off
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
Press the OK button to confirm.
REGIST is displayed.
▲
▼
C
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the OK button to confirm.
After a slight pause F1 is displayed.
G HI
4
PQRS
Press the 4 button.
7
Press the 7 button.
▲
▼
Press the UP or DOWN button to
scroll to either 0 to switch VIP off or 1
to switch VIP on.
C
OK
C
OK
Press the OK button to confirm.
F47 is displayed.
Press the C button twice to exit.
Note
In order to call you, when VIP is switched on,
your caller must follow these steps.
1) Dial your phone number.
2) Listen to the outgoing message.
3) Press the ✱ button.
4) Enter the VIP access code.
Your telephone will now ring.
26
Helpline
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Remote access
You can operate your answering machine from
any external Touchtone™ phone by phoning
your BT On-Air and entering your remote
access code.
WARNING
If you enter your old code incorrectly
the display will show F41. Please
check that you have not changed the
code. Press the C button twice to exit
and try again with the correct code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
If you have forgotten your remote
access code you should call the
Helpline on 0870 240 4682 and
you will be advised on how to reset
your telephone to its factory settings.
Important
You must change the remote access code from
the default setting of 0000 for your remote
access to function.
Enter your new 4 digit code.
Re-enter your new 4 digit code.
To change the remote access code
F41 is displayed.
C
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
OK
Press the C button twice to exit.
Press the OK button to confirm.
REGIST is displayed.
▲
▼
C
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the OK button to confirm.
After a slight pause F1 is displayed.
G HI
4
Press the 4 button.
1
Press the 1 button.
Enter your old four digit code
(0000 if not changed).
27
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To switch on your answering
machine from another external
telephone
If you forget to switch your answering
machine on you can do it from another
telephone:
Answering machine control
functions
Press:
To erase message being played.
1
To listen to your Answer and Record
outgoing message.
DEF
Dial your telephone number and let the
phone ring. After approximately 10
rings your BT On-Air will automatically
answer, although you will hear no
message.
At this point, press the # button.
You will hear, “Please enter your security
code”. Enter your remote access code.
PQRS
7
3
DEF
DEF
3
3
G HI
To replay the current message
4
G HI
G HI
4
4
MNO
To listen to your next message
6
Your answering machine will now be
switched on.
PQRS
To switch the answering machine ON.
7
TUV
To record a message
8
Note
If you enter your remote access code incorrectly,
you will hear, “Code error, thank you for calling”.
TUV
8
DEF
3
TUV
8
JKL
5
WXYZ
9
To listen to the previous message
To replay your messages, also pause/resume
playback
JKL
5
Wait for the confirmation tone then
press 7.
To listen to your Answer Only outgoing
message.
To record your outgoing message.
Press 3 to stop recording.
DEF
To record a memo message.
Press 5 to stop recording
JKL
To switch the answering machine OFF.
To access your answering machine
from a remote phone
Dial your telephone number.
Start listening to your outgoing
message.
Press the # button then you will hear
the voice prompt.
Enter your remote access code.
You now have control of your
answering machine. Any new messages
will be automatically played.
28
Note
When you access your answering machine
remotely, the above menu options will be
played to you to help you make your choice.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Using additional handsets
and bases
Using additional handsets
and bases
Up to six handsets can be registered and
operated from any one base. This allows you to
make internal calls between two handsets while
a third is making an external call.
C
D EF
2
3
MN
J KL
6
5
PQRS
T UV
7
O
GHI
4
WXYZ
8
If you purchase new handsets to use with your
current BT On-Air 2250 Classic, they will not be
pre-registered to a base station. You will need to
do this before you can use them.
To register a handset to a base
station (if you have not changed the
System Code from 0000)
OK
A BC
1
Registering additional handsets
9
0
C
OK
2
3
OK
D EF
2
GHI
3
MN
J KL
6
5
4
PQRS
WXYZ
9
T UV
7
WXYZ
8
0
O
6
T UV
8
A BC
1
MN
J KL
5
PQRS
7
O
GHI
4
C
D EF
A BC
1
9
0
Note
Please note that when you register a
handset in the following way any previous
base that the handset has been registered to
will be deleted. To prevent the deletion of
other registered bases please register using
the process on page 30 even if you have not
changed the system code from 0000.
Play
let
De e
S ki
swer
An
p Skip BT On-Air 1250
C
C
A BC
2
J KL
5
T UV
8
A BC
2
D EF
3
D EF
3
GHI
4
J KL
5
MN
6
O
PQRS
7
MN
6
O
GHI
4
OK
OK
1
1
PQRS
7
T UV
8
WXYZ
9
WXYZ
9
0
0
C
1
PQRS
OK
A BC
2
J KL
5
T UV
8
D EF
3
MN
6
O
GHI
4
7
WXYZ
9
0
If you have registered your handset to more
than one base you can prioritise which base
you want your handset to use. For
instructions on base station priority, see
page 16.
Each handset can also be registered on up to
four bases.
Each additional handset you purchase must be
registered to a base.
Your handset supplied is pre-registered (as
Handset 1) to its base (as Base 1).
At the base:kip
S
Note
To register a non BT On-Air additional
handset i.e. another DECT GAP compatible
handset to the On-Air 2250 Classic base
please follow the instructions in your
handset’s user guide.
Press and hold down the Skip button
on the base until the PLAY button starts
to flash.
29
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
The display will show AUTO.
On the handset:-
▲
▼
▼
Press the UP or DOWN button until
the display shows BASE.
C
OK
C
OK
C
OK
Press the DOWN button until CUSTOM is
displayed.
The available bases will be displayed.
Press the OK button.
▲
▼
The display will show REGIST.
Press the OK button.
The display will show AUTO.
C
Use the UP or DOWN button to select
the base you want to register your
handset to.
OK
Press the OK button to confirm.
The display will show REGIST and then
return to:
The display will show CODE?.
CODE
C
OK
-2-
The display will show _ _ _ _ _ _ _ _ .
Enter your 4 digit base system code
(once only).
Press the OK button.
At the base:-
kip
S
Note
To check whether registration has been
successful, press the GREEN PHONE button
and listen for the dial tone. If there is no
dial tone either you have not registered the
handset correctly or the telephone line cord
is not plugged in properly.
Press the OK button.
Press and hold the Skip button on
the base until the PLAY button begins
to flash.
On the handset:The display will show 2, 3, 4, 5, 6.
▲
▼
C
Use the UP or DOWN button to select
the handset you wish to register.
OK
Press the OK button to confirm.
The display will show REGIST and then
return to:
To register a new handset to a
base (if you have changed System
code from 0000)
On the handset:-
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
Press the OK button.
The display will show REGIST.
C
30
OK
Press the OK button.
-2-
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To de-register a handset from
the base
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▼
C
Press the OK button.
Press the DOWN button until the
display shows PARAM.
OK
DEF
Press the OK button.
Press the 3 button twice.
3
CODE
Enter your base system code (0000 if
not changed).
All registered handset numbers are
displayed.
Enter the number of the handset you
wish to de-register.
C
OK
Press the C button twice to exit.
Note
When planning to use a handset with more
than one base, we recommend that you:
• Number each handset (from 1- 6).
• Register your handset(s) at base 2
(and 3 & 4 if used) using the same internal
number as at base 1.
When registered to more than one base, the
base unit will automatically allocate itself
a number.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
31
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
General information
Guarantee
Your BT On-Air 2250 Classic is guaranteed for a
period of 12 months from the date of purchase.
Subject to the terms listed below the guarantee
will provide for the repair of, or at BT’s or its
agent’s discretion the option to replace the BT
On-Air 2250 Classic, or any component thereof,
(other than batteries), which is identified as
faulty or below standard, or as a result of
inferior workmanship or materials. Products
over 28 days old from the date of purchase may
be replaced with a refurbished product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects
that occur within the 12 month guarantee
period.
• Proof of purchase is provided.
• The equipment is returned to BT or its agent
as instructed.
• This guarantee does not cover any faults or
defects caused by accidents, misuse, fair
wear and tear, neglect, tampering with the
equipment, or any attempt at adjustment or
repair other than through approved agents.
• This guarantee does not affect your
statutory rights.
Within the 12-month guarantee period:
If you experience a problem with your product
you should contact the Helpline on 0870 240
4682. Calls are charged at local call rates. If the
problem is not remedied, you will be advised to
return your product to the Helpline.
32
Outside the 12-month guarantee period:
If your product needs repair after the guarantee
period has ended, the repair must meet the
approval requirements for connection to the
telephone network. We recommend that you call
the Helpline on 0870 240 4682 and ask for
details of our recommended repair agents.
If you have to return your product
If the Helpline are unable to remedy your problem
they will ask you to return the product. Pack the
base station and handset securely, preferably in
the original packaging. All parts must be
returned, including line cords, power supplies
and original batteries. (Please note that we can
not take responsibility for goods damaged in
transit). Use the self adhesive Freepost label to
post your product.
If you have lost the label please call the Helpline
for instructions.
Important
Keep proof of posting
Make sure the Post Office give you proof
of posting.
Technical information
How many handsets can you have?
All items of telephone equipment have a Ringer
Equivalence Number (REN) which is used to
calculate the number of items that may be
connected to any one telephone line.
The BT On-Air 2250 Classic (with up to 6
handsets) has a total REN of 1. Any other
instrument provided by BT may be assumed to
have a REN of 1 unless stated otherwise.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
A total REN of 4 is allowed per telephone line.
(For example: if the BT On-Air Classic is used
in conjunction with three extension telephones,
each with a REN of 1, then the total REN = 4)
Only use approved power supply item code:
872101.
Only use approved batteries supply item code:
872102.
Switchboard compatibility
Generally this telephone may be connected
to switchboards which support tone signalling
and timed break recall. In the event of any
difficulties please consult your switchboard
service provider.
Recall
To activate Recall
RTTE
This is of use when connected to some
switchboards i.e. to transfer calls or for
some BT Select Services or those
services available via your Network
Provider. It is only available when a call
is in progress.
This apparatus was designed in compliance with
European Council decision Number 98/482/EC
relative to pan-European connection in view to
its connection on the Public Switched
Telephone Network (PSTN). It is in conformity
with Standards TBR21, TBR38(*)ETSI 201 121.
When you need to use recall during
a call:-
(*) Terminals integrating an analogue handset function.
If problems arise, your supplier should be
contacted first.
The EC marking attests product conformity
with the essential requirements in compliance
with Directives 73/23/EC for User Safety,
89/336/EC for Electromagnetic perturbations
and 98/13/EC for Telecommunication
network access.
Recall
Press the RECALL button.
appears on the display.
The manufacturer declares that the products
have been manufactured in conformity with
Annex III of RTTE Directive 99/05/EC.
Please note this product does not support
earth recall.
33
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To switch between tone and pulse
dialling
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▲
▼
C
Press the OK button.
Press the UP or DOWN button until
the display shows PARAM.
OK
Switchboard external line
access code
When you connect your telephone to a
switchboard, you can set the switchboard’s
external line access code so that when you make
an external call using the handset directory,
redial list or preparatory dialling the code is
automatically dialled before the number.
Press the OK button.
To set the external line access code
The display will show F1.
A
AB
BC
C
2
Press the 2 button twice.
▲
▼
Use the UP or DOWN button to select
either 1 for tone or 2 for pulse (the
default setting is tone).
C
OK
Press the OK button to confirm.
C
OK
Press the C button twice to exit.
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▲
▼
C
Press the OK button.
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the OK button.
The display will show F1.
ABC
Press the 2 button.
G HI
Press the 4 button.
2
4
Press the 1 button.
1
C
OK
Press the OK button.
Enter the switchboard external line
access code, e.g. 9.
You can enter codes up to 8 digits in
length.
34
C
OK
Press the OK button to confirm,
C
OK
Press the C button three times to exit.
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
To activate and de-activate the
external line access code
To set the number of digits
▲
▼
C
Press the UP or DOWN button until
the display shows BASE.
OK
▲
▼
Press the OK button.
C
▲
▼
C
Press the UP or DOWN button until
the display shows PARAM.
OK
Press the UP or DOWN button until
the display shows BASE.
OK
▲
▼
Press the OK button.
C
Press the UP or DOWN button until
the display shows PARAM.
OK
The display will show F1.
ABC
2
4
ABC
2
C
OK
2
Press the 4 button.
G HI
4
Press the 2 button.
DEF
Press the OK button.
Enter the number of digits you dial to
make internal calls to other extensions
on your switchboard.
C
OK
Press the OK button to confirm.
C
OK
Press the C button three times to exit.
Press the OK button.
The display will show F1.
Press the 2 button.
ABC
G HI
Press the OK button.
Press the 2 button.
Press the 4 button.
3
Press the 3 button.
▲
▼
Use the UP or DOWN button to select
0 to de-activate, or 1 to activate.
C
OK
Press the OK button to confirm.
C
OK
Press the C button three times to exit.
Helpline
Note
For the external line access code to be dialled
for external calls only, it is important that all
external numbers stored in your handset
memories contain more digits than the number
of digits required to make an internal call to
other extensions on your switchboard.
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0870 240 4682.
This is most likely to occur when you have
local external numbers stored in the handset
memories without the area code. To overcome
potential problems ensure that all numbers
are stored complete with area code.
35
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Wall mounting
2
1
1 Push the base-mount
forward onto the rear
of the base.
2 Once slotted into the rear
of the base, slide upwards
to lock into position.
If wall mounting your BT On-Air 2250 Classic,
use this guide for position.
• Make sure that you are not drilling into any
hidden wiring and check that the power cable
will reach from the mains socket to the
charger. Switch the power adaptor off at the
mains and remove the adaptor plug from its
socket.
• Drill two holes 25mm deep using a 3mm drill,
122mm apart to take the wall plugs.
• Put wall plugs into the drill holes and then
insert both screws. Leave 2-3mm between
the head of the screw and the wall. You are
now able to mount the base to the wall.
• Fit the base onto the two screws. If necessary,
tighten or loosen the screws for the best fit.
• Put the handset back in the base and switch
the power back on at the wall socket.
36
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
WALL PLUG
122 mm
WALL
SCREW
122mm
37
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
38
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Index
Additional handsets and bases
Answering machine
adjust recording time
answer mode
delete messages
delete own outgoing message
listen to outgoing message
memo
number of rings before answers
on/off
play message
record an outgoing message
remote access
setting up
VIP
29
21
18
24
20
20
24
21
22
23
18-19
27
18
25
make
receive
redial
secrecy
transfer
Calls list
10
Date – set
17
Delete
all messages
calls list
directory numbers
messages during playback
own outgoing message
redial list
24
11
12
24
20
11
31
Answer modes
18
De-register handsets
Automatic end call on/off
15
Desk mounting
Base settings
15
Base station priority
16
Base system code
15
Battery
charge
low warning
performance
replacing
6
6
6
7
Belt clip
7
Caller Display
10
Call screening
25
Call timer
8
Call waiting
11
Calls
end
external
handsfree
internal
8
8
9
13
8
8
9
9
13
5
Dialling mode
34
Directory
delete
dial
edit
store
11
12
12
12
11
Earpiece volume
External line access code
8
34
General information
32
Guarantee
32
Handset fascias
Handset power
Handset settings
7
8
14
Handsfree
9
Helpline
3
Internal calls
13
39
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Keypad beeps
14
Language
15
Length of last call
11
Location of product
5
Making calls
8
Melody
base
handset
16
14
Memo
Messages
delete
new message indicator
pausing playback
playback
skipping through
Name and number directory
delete
dial
edit
store
Number of rings before answering
24
24
23
24
23
24
Paging
Play messages
9
Registering additional handsets
29
Remote access
access remotely
answering machine control functions
change code
switch on
27
28
28
27
28
REN
32
Returning your product
32
Ringer
base melody
base volume
handset melody
handset volume
16
16
14
14
Rubber feet
5
Safety information
4
Secrecy
9
Setting up
5
21
Silent ring
14
Set date and time
Store a name and number
22
15
8
9
26
Switchboard external line access code
17
11
34-35
Switchboard compatibility
33
System code
15
Technical information
32
13
Telephone line cord
23
Time – set
17
7
Power on/off
8
Tone dialling
34
Power supply
5
Transferring calls
13
Preparatory dialling
8
VIP
Priority base selection
16
Pulse dialling
34
Quick guide to menu structure
Recall
Receiving calls
Record outgoing message
40
Redial
24
11
12
12
12
11
On/Off
answering machine
automatic end call
handset power
secrecy
VIP
Record memo
2
33
8
18-19
changing code
on/off
25
26
Volume
base ringer
earpiece
handset ringer
16
8
14
Wall mounting
36
On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British Telecommunications
plc’s respective standard conditions of contract. Nothing in this publication
forms any part of any contract.
Touchtone™ is a registered trade mark of
British Telecommunications plc in the UK.
© British Telecommunications plc 2002.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed by: The Art & Design Partnership Limited.
Printed in Europe. On-Air 2250 Classic. Issue 1 (07/02) 5
Printed on paper which meets international environmental standards.
*251180180*
User manual Indice A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising