Target WNCOFFTBGY Assembly Instructions Manual

windham
coffee table
style # WNCOFFTBWH (shell)
dpci # 249-16-0772
tcin # 14373231
style # WNCOFFTBBL (teal)
dpci # 249-16-0773
tcin # 14372256
style # WNCOFFTBRD (red)
dpci # 249-16-4309
tcin # 50076905
style # WNCOFFTBBK (black)
dpci # 249-16-4310
tcin # 50076908
style # WNCOFFTBGY (gray)
dpci # 249-16-4311
tcin # 50076907
>> assembly instructions
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re confident you won’t need it.
before you begin
1.
2.
3.
4.
Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
Use the carton as a working surface to prevent product damage during assembly.
Read through and review assembly steps.
Gather all tools prior to assembly.
tools needed
2
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
2
4
5
6
7-14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
3
hardware
(H1) x 17
wooden dowel
(H6) x 2
pull
4
(H2) x 19
cam bolt
(H3) x 19
cam
(H4) x 7
flat head screw
(H5) x 2
pull bolt
exploded diagram
ITEM
DESCRIPTION QUANTITY
A
top panel
1
B
right side panel
1
C
left side panel
1
D
back panel
1
E
bottom trim
1
F
drawer face
1
G
drawer bottom
1
H
drawer back
1
I
drawer right side
1
J
drawer left side
1
K
drawer support
1
L
shelf
1
M
top trim
1
5
how to use the cam lock system
2.
1.
Screw cam bolt into panel
3.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
4.
Rotate cam(s) clockwise 180° to
lock panels together
6
Push cam into panel - arrow feature
on cam top points to panel edge
5.
Panels should be tight against each
other and connection should be rigid
step 1: attach shelf/bottom trim/top trim/back panel to left side panel
(H1) x 4
(H2) x 5
wooden dowel cam bolt
1.1.
1.2.
1.3.
1.4.
(H3) x 5
cam
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
Do not over tighten bolts.
7
step 2: attach right side panel
(H1) x 4
(H2) x 5
wooden dowel cam bolt
2.1.
2.2.
2.3.
2.4.
8
(H3) x 5
cam
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
Do not over tighten bolts.
step 3: attach top panel
(H1) x 4
(H2) x 6
wooden dowel cam bolt
(H3) x 6
cam
3.1.
3.2.
3.3.
3.4.
(H4) x 2
flat head screw
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
Do not over tighten screws.
9
step 4: attach drawer right side/support/left side to drawer face
(H1) x 3
(H2) x 3
wooden dowel cam bolt
4.1.
4.2.
4.3.
4.4.
10
(H3) x 3
cam
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
Do not over tighten bolts.
step 5: attach drawer bottom and position drawer back
(H1) x 2
wooden dowel
5.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
11
step 6: attach drawer back
(H4) x 5
flat head screw
6.1. Align screws with pre-drilled holes.
6.2. Do not over tighten screws.
12
step 7: attach pulls
(H5) x 2
pull bolt
(H6) x 2
pull
7.1. Align bolts with pre-drilled holes.
7.2. Do not over tighten bolts.
13
step 8: install drawer
14
25 lb
s.
70 lbs
.
60 lbs
.
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
15
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.