8'x8' Pergola with Solid Slats _ Lars
Style# L-PG169PST-1A
DPCI# 009050547
Production No.: XXXXXXXX
Assembly Instructions
Safety Information
1. Two people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective gloves.
3. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and
damage to equipment. Please read all instructions before assembly and usage.
DANGER
This unit is heavy! Do not assemble this item alone.
Warranty: 6 months
WHAT IS COVER?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided the item is maintained with
care and used only for personal, residential purposes.
IMPORTANT
KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
Assembly Instructions
Parts List
A
P11141C01108
Post 1
2
B
P11142C01108
Post 2
2
C
P11571A01108
Base Cover
4
D
P11683A01108
Base
4
E
P11064A01108
Cross Beam 1
2
F1
P11063A01194
Cross Beam 2
2
F2
P11059E01194
Cross Beam 3
4
G
P13012C01194
Top Small Beam 1
9
H
P13013C01194
Top Small Beam 2
1
I
P12601A01108
Hook
1
Assembly Instructions
Hardware Pack
AA
H02020C11
M6X20 Bolt
28 PCS
BB
H19001C11
M6 Washer
28 PCS
CC
H13001C11
M6 Spring Washer
2 PCS
DD
H0200D11
M8X20 Bolt
48 PCS
EE
H19001D11
M8 Washer
48PCS
FF
H13001D11
M8 Spring Washer
48 PCS
GG
P12401A0100
Stake ¢8*180
8 PCS
Z1
H0001C12
M6 Wrench
1 PC
Z2
H0001D12
M8 Wrench
1 PC
Assembly Instructions
Assembly Instructions
Fig.1: Insert Base Cover (C) into
Fig.2:
Attached
the
Cross
Fig.3: Attached Cross Beam 1 (E)
Post (A, B), then fix Base (D) to
Beam 2(F1) to Post (B) by Bolt
to Post (B) by Bolt (DD), Spring
Post (A, B) by Bolt (AA) and
(DD), Spring Washer (FF) and
Washer (FF) and Washer (EE).
Washer (BB).
Washer (EE). Then fix Cross
Then
Beam 3(F2) to Post (B) by Bolt
assemble Post (A) and Beam 1 (E).
(DD), Spring Washer (FF) and
Washer (EE). Then use same
way to assembly Post (A) and
Cross Beam 2, Cross Beam 3.
Assembly Instructions
use
the
same
way
to
Assembly Instructions
Fig.4: Attached the Hook (I)
to Top Small Beam 2 (H)
Fig.5: Attached the Top Small
Fig.6: Put The Top Small Beam
Beam 2 (H) to Cross Beam 2(F1)
1(G)’s end into the U-shaped on
by Bolt (AA), Spring Washer
the side of Cross Beam 1(E) (Big
(CC) and Washer (BB).
hole need put upper and small one
need put down), then fix them by
Bolt (AA) and Washer (BB).
Fig.7: Attach the assembled
pergola to lawn with Stake
(GG).
Assembly Instructions
">