- No category
advertisement
V 2.0
DVD PLAYER
DVD-DL317
USER MANUAL
Safety Instructions
Danger Symbol
Reminding the user of the dangerous voltage!
Warning Symbol
Reminding the user of the important instructions for operation and maintenance.
WARNING:
To prevent the risk of fire or electric shock, do not expose this unit to rain or moisture.
High voltage components in it so do not attempt to open the enclosure. Only qualified personnel are allowed for maintenance.
CAUTION:
This DVD player contains laser system.
Read this manual carefully and get familiar with the instructions before operating.
After reading this manual, please keep it for future reference. Please contact your local dealer or our technical service center for maintenance.
To prevent direct laser radiation, do not attempt to open the enclosure. Visible laser beam will radiate when the enclosure is opened or when the interlock device is released. Do not stare at the laser-beam.
To avoid damaging the loader of the unit, please don't pull or drag the tray of the loader when operating and switch off the power supply only when the "NO DISC" is displayed.
Never place other things or articles upon the player, otherwise it may cause improper playback.
is a trademark of DVD Format/Logo Licensing Corporation, registered in the U.S.,
Japan and other countries.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
All images in this manual are sketch illustrations for reference only. The actual displays are contingent upon discs.
CONTENTS
LCD Display Window Illustration
Features
Remote Control Illustration
Compatible Disc Types
How to Use the Remote Control
Explanations
Connected to TV set with progressive-scan video input
Connected to TV set
Connected to Ordinary Audio System
Connected to Amplifier with Dolby Digital Decoder
Connected to Amplifier with DTS Digital Decoder
Connected to Amplifier with 5.1CH Audio Input
Pause/Step Playback
Selection
OSD
DVD Menu Playback
Repeat the Selected Section
Virtual Keyboard
Slow playback
Disc INFO
Subtitle selection
MPEG4,Mp3 and JPEG File
Angle Selection
Playing playback from the Desired Point
Headphone Enjoying
Speaker Setup
Initial Setup
Specifications
PREFACE
Brief Introduction to DVD
DVD is well known for its extraordinarily large capacity and outstanding audio-video effects. Its capacity is as high as 4.7-17 GB (approximately 7-26 times the CD capacity).With 500-line horizontal resolution of picture and Dolby
Digital 5.1 Channel surround sound, it brings a new era to the household AV products.
Comparison Between DVD and Other Discs
DVD LD Super VCD VCD CD CDROM
Recording Method
Capacity
Singlesided
1 layer
4.7G
Digital/MPEG2
Singlesided
2 layers
8.5G
Doublesided
1 layer
9.4G
Doublesided
2 layers
17G
Playback time
Analog
133min.
242min. 266min. 484min.
12cm/8cm
1 side 60min.
2 sides 120min.
30cm/20cm Disc Diameter
Horizontal
Resolution
Aspect Ratio
500 lines or more
Multiple
430 lines or more
One
Digital/MPEG2
650MB
45min.
12cm/8cm
Digital/MPEG1
650MB
74min.
12cm/8cm
350 lines or more 250 lines or more
Digital
650MB
74min.
12cm/8cm
Subtitle
Audio
Sound Quality
32 types
Dolby Digital/Linear PCM
48kHz,96kHz/16,20,24bit
Max. 16 types
Linear PCM
FM modulation
44.1kHz/16bit 44.1kHz
Linear PCM
44.1kHz/16bit
Digital
650MB
12cm/8cm
Function Introduction
Multiple languages and subtitles
DVD disc can support as many as 8 dubbing languages and 32 subtitle languages.
Multiple angles
DVD disc may support as many as 9 camera angles.
Multiple story plots
User can select to play the desired plots (the beginning, development or ending) of the same disc.
Multiple aspect ratios
Multiple aspect ratios support various TV screens.
Disc Pictures
Pan-Scan
4:3
TV Screen
Letterbox
16:9
4:3
16:9
1
PREFACE
Cautions
Please remove the power plug from the socket when you are not going to use the player for a long time.
Ensure that all wires and the power supply are properly connected befor turning the Power on.
The player uses the switching power supply .The range of the power supply: AC 110V~250V, 50/60HZ.
Before turning on the power of the player, please adjust the volume level knob of audio system speakers and amplifiers to minimum. Adjust the volume as necessary only after starting normal playback to avoid damage to your amplifiers or speakers.
Do not put your player near any high power speaker or put both on the same table-board so as to avoid any influence on its nomal operation due to vibration.
Please put the player at a dry and ventilated area. Do not put it near heat source, or expose it to direct sunlight, mechanical vibration, humidity or dust-rich environment ,and also do not put it over heat releasing substances.
When moving the player from a cold place to a warm one, or vice versa, the laser head may have condensation.
Then the player will not work properly. In such a case, please turn the power on for 1-2 hours(without disc) before playing.
It is allowed to use a small amount of neutral detergent to clean the player. Never use sandpaper or organic solvent such as alcohol or gasoline for cleaning.
Do not place objects full of liquid such as vase on the player.
Features
This player has employed the new generation DV decode chip with built-in Dolby Digital decoder which will bring you to a brand-new AV ententainment world. The 2-laser super error-correction mechanism supports CD-R.
Brand-new AV Effects
Compatible with DivX, MPEG4 discs to produce wonderful pictures.
108MHz/12bit video DAC, with more vivid and brilliant pictures.
Progressive-scan video outputs to eliminate the flickers hardly overcome by interlacing scan and therefore your eyesight will be well-protected. At the same time, the pictures definition is sharply enhanced and the pictures will be finer, smoother and stabler
Brightness, chroma and contrast adjustment functions to render your eyes more comfortable.
Composite Video, S-Video and Component Video outputs.
Bullt-in Dolby Digital decoder, separate 5.1Ch Outputs.
Dolby output for 2channel(DOWNMIX)
DVD-Audio decoding output to reproduce original and realistic sound effects.
High Quality Digital Audio
Optical and coaxial outputs for Digital audio.
Dobly Digital, PCM Digital audio outputs to satisfy the Fans’ acoustic requirements.
Many Convenient Features
Screen saver protects your TV set carefully.
The novel Mp3 playback window GUI provides you a new way to appreciate Mp3 music.
Multi-angle playback function makes it possible for you to view a scene from different camera angles.
It’s possible to select the desired beginning, development and ending of a story.
Direct entry into desired scenes(title/chapter/time/track search).
Zooming function to zoom up any playing picture.
Capable of playing PAL/NTSC discs.
Multiple aspect ratios to fit TV sets of various screen ratios.
Parental lock function to prevent children from watching unsuitable discs.
Multiple dubbing languages and subtitle languages bring you the best entertainment status all the time.
Super Compatibility with super VCD, VCD, CD , CD-R , MP3,HDCD,
KODAK PICTURE CD etc.
NOTE: DivX version is still upgrading continuously and the latest version of this unit is DivX 5.1. Some discs
labelled with MPEG4 on the market actually are*.rm/*.ram/*.rmm and others which are imcompatible.
Please take care when buying discs.
2
PREFACE
Compatible Dise Types
Types
Sizes
Recorded Contents
12cm or 8cm
DVD: Compressed digital audio + compressed digital video(dynamic picture)
12cm or 8cm Super VCD: Compressed digital audio + compressed digital video(dynamic picture)
MPEG4
12cm
MPEG4: Compressed digital audio + compressed digital video(dynamic picture)
12cm or 8cm
VIDEO CD: Compressed digital audio + compressed digital video(dynamic picture)
12cm or 8cm
12cm
CD-DA: Digital audio
Mp3: Compressed digital audio
12cm or 8cm DVD: Compressed digital audio + compressed digital video(still picture)
1
NOTES
When the button is invalid, on TV screen display:
2
Press the effective button again.
DVD
Issues related to
MPEG4
Super VCD
VCD
CD
MP3
These icons on the top banner indicate the disc types that the function described in this section applies to.
DVD
Applies to DVD disc
VCD
Applies to VCD disc
MPEG4
Applies to Super MPEG4 disc
CD
Applies to CD disc
Super VCD MP3
Applies to Super VCD disc Applies to MP3 disc
Control Button Locations and Explanations
Front Panel Illustration
2 3 4 5 6 7 8 9
Power indicator
2
IR SENSOR
3 Display window
4
OPEN/CLOSE button
5 PLAY/PAUSE button
6
STOP button
3
7
PREV button
8
NEXT button
9 POWER switch
PREFACE
Control Button Locations and Explanations (Continued)
Rear Panel Illustration
1 3 4 5 6
Headphone jack
2
5.1CH Audio Out jacks
3
Digital Audio Optical Out jack
4
Digital Audio Coaxial
Out jack
5
Video Out jack
6
S-Video
LCD Display Window Illustration
1 2 3
SVCD
C D
7
Component Video/
Y Pb Pr Out jacks
8 Power socket
4
MP3
5 6
DVD disc
2
VCD, SVCD disc
3
CD disc
7 8
4 Mp3 disc
5
PLAY or PAUSE
6 Chapter or Track
9
7 DOLBY DIGITAL
8 Playback time
9
DTS
4
PREFACE
Control Button Locations and Explanations (Continued)
2
3
4
5
6
7
8
9
Remote Control illustration
10
11
12
13
14
15
16
17
18
STANDBY
GOTO
ZOOM
ANGLE
MUTE
INFO
SETUP
PLAY
REV
REPEAT
P/N
AUDIO
1
4
7
+10
SELECT
STOP
FWD
A-B
KEYBOARD
SUBTITLE
2
5
8
0
RETURN
MENU
PAUSE
I-SCAN
SKIP
VOL
EJECT
3
6
9
OSD
PSM
2/5.1CH
TITLE
SLOW
P-SCAN
29 2/5.1CH Button
Switch stereo and multi-channel.
30
RETURN Button
Back to the previous menu/Clearing input numbers.
PSM Button
Power Spectrum Meter on/off.
OSD Button
Display or hide disc information.
NUMBER Buttons
34
SUBTITLE Button
Change subtitle language,Switch JPEG display modes.
35
EJECT Button
Open or close the disc tray.
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
2
3
4
5
6
7
8
STANDBY Button
Press once to standby, Press twice to play.
AUDIO Button
Change the audio language or audio channel.
GOTO button
Play from the desired location.
ZOOM Button
Zoom in/out the displayed frame.
ANGLE Button
Change camera angles,MP3/JPEG playback modes switch.
MUTE button
Press once to mute, twice to unmute.
INFO button
Browse the disc s information.
CURSOR Buttons
9
SELECT Button
10
SETUP Button
Function setup.
11 PLAY Button
Normal playback.
12
STOP Button
Stop playback.
13 REV Button
Fast backward play.
14
FWD Button
Fast forward play.
15 REPEAT button
Repeat play.
16
17
A-B button
Repeat the select.
P/N Button
18
Switch the TV system between PAL,NTSC and
AUTO.
KEYBOARD Button
19
Open/close the virtual keyboard function.
I S Button
Switch video output to the interlacing mode.
20
PS Button
21
Switch video to the progressive YPbPr mode.
VOLUME -
Decrease volume..
22
23
VOLUME+
Increase volume.
PREV Button
Skip backward.
24
NEXT Button
Skip forward.
25
26
PAUSE Button
Pause play.
SLOW Button
Slow play.
27 MENU Button
Display DVD menu or open/close PBC.
28
TITLE Button
DVD titles..
5
PREFACE
Control Button Locations and Explanations (Continued)
How to Use the Remote Control
Battery Installation
Cr2025 Cr2025
1
2
Using the Remote Control
When using the remote control, the front window of the remote control should be pointed to the infrared sensor on the front panel within an angle of +/- 30 and a range of 3 metres.
Within about 3m
Cautions
Never drop the remote control or expose it to moisture.
Never expose the infrared remote sensor on the front panel to direct sunlight or strong beams.
When the batteries become low, replace it in time.
Accessories
Audio/Video Cord
Remote Control
3V Button Battery
User Manual
1pcs
1pcs
1pcs
1pcs
6
SYSTEM CONNECTIONS
Caution
Make sure that the player and other equipments are unplugged before connecting.
Connected to TV set with Progressive-scan Video Input
Rear Panel
Audio In
TV set with progressive-scan
video input
Audio Cord
If you want to enjoy progressive-scan video, please press PS button to switch the player to
progressivescan video output mode. In this mode, the interlacing output cannot be used.
If the progressive-scan TV set has Y, Pb, Pr video inputs, you can use the Y, Pb, Pr outputs of the player. Please press PS button to switch the progressive-scan outputmode into YPbPr when using Y, Pb, Pr outputs.
If the audio outputs of the player are also connected to the TV set, the L/R channels of the front
Audio OUT ought to be connected to the TV AUDIO IN terminals accordingly.
7
SYSTEM CONNECTIONS
Connect to TV set
Or
To enjoy the interlacing video, press IS button to switch the video of the DVD player into interlacingscan mode. The progressive-scan outputs cannot be used in the interlacing-scan outputs mode.
If the TV set has S-Video inputs, an S-Video cord can be used to connect this player with the TV set.
If the Tv set has component video input, the component video output of this DVD player can be used.
Please press 2/5.1CH button to set the stereo, or set the audio output mode in DOLBY STEREO,
STEREO, V SURR instead of 5.1CH mode in the speaker settings (please refer to page 22 for details).
If the AUDIO OUT of this player is also connected to the TV set, the L/R channels of the front AUDIO
OUT ought to be connected to TV AUDIO IN terminals in the same group with VIDEO IN.
8
.10.
SYSTEM CONNECTIONS
Connected to Ordinary Audio System
Video In
Amplifier equipped with Dolby Pro Logic Surround
Front Left Speaker
Centre Speaker
Front Right Speaker
Subwoofer
Surround Right Speaker
Surround Left Speaker
When set the speakers, please set the AUDIO OUT mode to STEREO (please refer to page 22 for details).
9
SYSTEM CONNECTIONS
Connected to Amplifier with Dolby Digital Decoder
Optical In
Coaxial In
Connect either of the cords
Optical Cord
75 Coaxial Cord
Amplifier with Dolby Digital Decoder
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. 1992-1997
Dolby Laboratories. All rights reserved.
10
SYSTEM CONNECTIONS
Connected to Amplifier with DTS Digital Deconder
Optical In
Coaxial In
Connect either of the cords
Optical Cord
75 Coaxial Cord
Amplifier with DTS Digital Decoder
Front Left Speaker
Center Speaker
Front Right Speaker
Subwoofer
Surround Left Speaker Surround Right Speaker
"DTS" and "DTS Digital Out" are the trademarks of Digital Theater Sys tems,
Inc.
11
SYSTEM CONNECTIONS
Connected to Amplifier with 5.1CH Audio Input
Video In
Amplifier with 5.1CH Audio input
1 2 3 4 5 6
1
The white refers to front left.
2
The red refers to front right.
3
The white refers to surround left.
4
The red refers to surround right.
5
The red refers to subwoofer.
6
The white refers to centre.
Built-in Dolby Digital decoder makes it possible to play the DVD discs recorded with Dolby Digital surround
technology. If the DVD player is connected to AV amplifier with 5.1CH inputs and plays the discs recorded with
Dolby Digital surround, you may enjoy the same audio and video effect as that inthe theatre when you are
at home.
Press 2/5.1CH button to set 5.1CH, or set the audio output mode to 5.1CH in the speaker settings. Set the
corresponding channel of any connected speaker not in use as OFF. (Please refer to page 22 forDetails)
Distance between the surround speakers and the listener should not be shorter than that between the Front
speakers and the listener.
12
.
BASIC OPERATION
Playback
DVD MPEG4 SVCD VCD
1. Connect the DC output socket of the power adaptor
with the power input jack of the player to turn on
working power supply
2. Press OPEN/CLOSE button to open the disc tray.
Disc tray ejects automatically, and then place the
disc with the label side facing up.
3. Press OPEN/CLOSE button again and the disc
retracts.
The player begins to read the disc information.
STANDBY
CD MP3
NOTES
Please change your TV settings accordingly and connect the cords according to the instructions in pages 7&8.
When there are no audio and video outputs if you switched on this player or pressed the above two buttons and the LCD works normally, please check whether this player's progressive-scan or interlacing-scan mode corresponds to that of the
TV set.
To help you to recognize more clearly in which output mode this player is, character appears on the LCD when opening the disc tray or reading a disc. I indicates the interlacing-scan mode, while
P indicates the progressive-scan mode.
This player's interlacing-scan mode does not support the old-style 100Hz color TV set.
4. Press PLAY button and playback automatically
begins.
5. Press STOP button to stop playback.
Press STOP button for the first time and the player
enters pre-stop status. Now if you press PLAY
button, the player continues to play from the stopped
point; press STOP button again and the player enter
the stop status.
When playing MP3 discs, press STOP button to
enter stop mode directly.
6. Press STANDBY button to enter standby mode
when finish playing. Please pull out the power
adaptor plug from the power source outlet if you
do not intend to usethis player for an extended
period of time.
NOTES
Please turn off power supply when you are not going to use the player for a long time.
Press STOP button twice when playing DVD disc so switch into stop status.
TV System Selection
DVD MPEG4 SVCD VCD CD
Set the system of this player according to the connected
TV set system in order to match to the TV set.
1. Press P/N button to select PAL system if the system of
TV set is PAL. The TV screen displays:
PAL
2. Press P/N button to select NTSC system if the system
of TV set is NTSC. The TV screen displays:
NTSC
AUTO
MP3
3. Press P/N button to set automatic system when using
multi-system TV set. The TV screen displays:
Progressive/Interlacing OutputMode
P/N
You can adjust this player's video output mode according to TV settings.
IS
PS
1. Press the IS button.
Press IS to switch the video to the interlacing scan output mode.
2. Press the PS button.
Press PS to switch the video to the Y Pb Pr mode.
NOTES
The system cannot be switched when playing a disc in the interlacing scan mode. The system can be switched in the stop mode or no disc inside.
Some functions of certain discs can not be performed very well when not in the very system status.
It is recommended that you set the system of both the TV set and this player to be AUTO.
13
BASIC OPERATION
Pause/Step Playback
CD DVD MPEG4 SVCD VCD MP3
1. Press PAUSE button in playback status.
Press PAUSE button once to pause playback. The TV screen displays:
Volume Control
VCD DVD MPEG4 SVCD CD MP3
1. Press VOLUME button on TV set or
Amplifier to adjust volume.
2. Press PAUSE button in pause mode to realize
step playback function. Each press moves
one frame forward. The TV screen displays:
PLAY PAUSE
No step playback function available when playing CD or MP3 discs.
3. Press PLAY button to restore playback.
NOTES
When you set the screen saver mode to ON (See
Page 21 for details), the display on TV screen turns to screen saver status after the picture on
TV screen keep still for about 2 minutes ( in mode such as pause mode, stop mode, menu select, set up menu, no disc mode and so on).
OSD
DVD SVCD VCD CD
1. Press OSD button.
Disc information and operation function hint will display on TV screen when in operation.
Press OSD button to display the following
function:
OSD
TITLE ELAPSED
TT / CH / : :
TITLE REMAIN
DISPLAY OFF
CHAPTER REMAIN CHAPTER ELAPSED
SVCD, VCD, CD discs:
SINGLE ELAPSED
TRACK / :
SINGLE REMAIN TOTAL ELAPSED
TOTAL REMAIN
DISPLAY OFF
VOL -
VOL +
2. Press VOLUME button on the remote
control of this unit.
Press VOL+ button to increase volume.
Press VOL- button to decrease volume.
The maximum volume is 20.
DVD Menu Playback
DVD
Some DVD discs are made with title menu or chapter menu function.
1. Press MENU button to display menu on
TV screen for selection. Operate according
to the hint of menu and press number
buttons to select.
1.
2.
3.
2. Press CURSOR button to select the track
you desired, and then press PLAY or SELECT
button.
NUMBER
CURSOR
PLAY
SELECT
TITLE
MENU
NOTES
Press TITLE button the first time to return to title menu.
Press MENU button the first time to return to initial menu.
The return location varies with discs.
PBC Playback
SVCD VCD
You can enjoy the menu playback alternate]
function when playing SVCD, VCD 2.0 discs
with menu playback function. In the setup menu, you can set the menu playback
mode and select menu playback or sequence playback. Please refer to page
24 for details.
For example: Play VCD2.0 disc.
1. Main menu displays on TV screen.
Press number buttons to select. For example: press number button 1 to select main menu 1.
14
BASIC OPERATIONS
2. Submenu displays on TV screen after entering into main menu 1.
1.
2.
3.
4.
5.
3. Press NEXT or PREV button to turn to adjacent page.
4. Press NUMBER buttons to select in submenu.
For instance, press number 5 and the player
begins to play the fifth track.
1.
2.
3.
4.
5.
5. Press TITLE button to return main menu when in menu playback.
6. Press MENU button to realize sequence playback function when in menu playback; press MENU button to realize menu playback function when in sequence playback.
7.Press RETURN button to submenu.Press
again to return to main menu.
Language/Audio Channel Selection
DVD SVCD VCD CD
1. Press AUDIO button.
You may select the language you desire when playing multi-language DVD, SVCD discs.
DVD disc:
AUDIO
SVCD disc:
1/2:
AUDIO 1
AUDIO
AUDIO 2
2/2:
AUDIO 4
AUDIO 3
.
You may select audio output from left or right channel or stereo audio output when playing multi-channel CD or VCD discs.
For example: to VCD disc, dubbing is recorded
in left audio channel and singing in right audio channel, you can select left channel for dubbing
VCD, CD discs:
LEFT MONO RIGHT MONO
STEREO
NUMBER
PLAY
MENU
PREV
NEXT
Direct Selection Playback Function by Number Button
DVD
MPEG4
SVCD VCD CD
1. Input disc, after the player begins reading, press number buttons to select
track for playback.
Press the number buttons 1-9 directly to select the according track if the track number is below 10.
For example, select the track 7:
7
Press the +10 button and then the number buttons 0-9 to select the according track if the track number is above 10 (including 10).
For example, select the track 16:
10 + 6
+10 6
Press the +10 button twice and then press the number buttons 0-9 to select the according track if the track number is above 20 (including 20). The rest can be performed by analogy.
AUDIO
NOTES
Language kinds varies with different disc
recording.
To dual-language VCD disc, you may press
AUDIO button to select your desired language.
When playing some DVD discs, pressing
AUDIO button may result in playing the track
from its beginning.
MUTE
DVD MPEG4 SVCD VCD CD MP3
When playing discs, mute function can be used to switch off audio output.
1. MUTE
* Press MUTE button and the word MUTE displays on TV screen.
MUTE
2. Resume audio output.
* Press MUTE button again to unmute.
MUTE OFF
NUMBER
MUTE
NOTE
Press MUTE button when the player has not audio output.
15
Fast Playback
DVD VCD MPEG4 SVCD CD
You can select forward or reward playback to search the point you desire when playing discs.
1. Press Forward button and the player starts forward playback.
Each press of FWD button switches the playback speed of DVD, SVCD, VCD and CD discs in the following sequence circularly:
2X
4X 8X
32X 16X
2. Press REV button and the player starts reward playback.
Each press of REV button switches the playback speed of DVD, SVCD, VCD and CD discs in the following sequence circularly.
2X
32X
4X
16X
8X
FWD
REV
Repeat Playback
VCD DVD MPEG4 SVCD CD
MP3
The repeat function enables a title/chapter/ track/disc repeated.
1. Each press of REPEAT button performs different repeat functions.
DVD disc:
CHAPTER TITLE ALL REPEAT OFF
SVCD, VCD and CD discs:
The repeat playback can be performed to
SVCD or VCD2.0 only when the PBC is off and to VCD1.1 or CD whether the PBC is on or off.
TRACK
The repeat function is not available for SVCD and VCD2.0 discs when the PBC is on.
MP3 disc:
SINGLE REPEAT ONE
REPEAT
FOLDER
FOLDER
PLAY OPERATION
Repeat the Selected Section
DVD MPEG4 SVCD VCD CD MP3
When playing discs, you may press A-B button to repeat playback of certain section you desire.
1. Under normal playback, press A-B button at the desired point (point A) to set the beginning.
TV screen displays:
A
2. Under normal playback, press A-B button at
the desired point (point B) to set the ending.
TV screen displays:
AB
The player returns to point A automatically to repeat the selected section (A-B).
3. Press A-B button for the third time.
Normal playback resumes.
A-B
NOTE
The A-B repeat function may be not available for some discs.
Sections can only be selected in the same track in PBC mode.
Slow Playback
DVD Super VCD VCD
You may enjoy slow playback according to the following step
1.Press SLOW button to turn to slow playback mode,
the following displays on TV screen
DVD Playback
When playing a DVD audio disc, the slow function cannot be persormed if you press the slow button.
However, when pressing the SLOW button, the screen will show the previous picture provided that the disc supports this function.
Press PLAY button in slow playback status resumes
normal playback.
Super VCD, VCD Playback
Press PLAY button in slow playback status to resume nomal playback.
PLAY SLOW
REPEAT
16
PLAY OPERATION
Subtitle Selection
DVD
1. Press SUBTITLE button.
When playing the DVD disc recorded with subtitles of different languages, it is possible to select different subtitle languages.
Each press of SUBTITLE button switches one subtitle language and the TV screen displays:
SUBTITLE 01/03 SUBTITLE 02/03
SUBTITLE OFF SUBTITLE 03/03
The number of the switchable subtitle languages varies with discs. DVD disc has
32 selected subtitle language at the most.
SUBTITLE
Angle Selection
DVD
1. Press ANGLE button and the TV screen displays:
1/4
2. Press number buttons to select your desired playback angle.
2/4
3/4
4/4
3. Press ANGLE button to select the default angle to resume normal playback.
ANGLE
NOTE
The number of angles varies with different
DVD discs. You can change as many as they have.
This function only applies to the discs recorded with different angles.
17
Playback from the Desired Point
DVD MPEG4 SVCD VCD CD
Playing DVD disc
Input the time, title or chapter directly, the content can be found quickly and played from
the selected point.
1. Title, Chapter search. For example: search
Chapter 2, Title 6:
Press GOTO button and the TV screen displays:
TITLE 03/30 CHAPTER /02
Press CURSOR button to lighten the title number, as shown in the figure:
TITLE /30 CHAPTER 01/02
Press number button 6 to select Title 6, as shown
in the figure:
TITLE 06 /30 CHAPTER /02
And then press number button 2 to select
Chapter 2, as shown in the figure:
TITLE 06 /30 CHAPTER 02/02
2. Title time search
Press GOTO button until the TV screen displays the following picture. Then press number buttons
to input hour, minute and second.
TITLE 06/30 TIME : :
3. Chapter time search
Press GOTO button until the TV screen displays the following picture. Then press number buttons to input
hour, minute and second.
CHAPTER 01/04 TIME : :
Playing SVCD, VCD and CD discs
1. Disc time search
Press GOTO button until the Tv screen displays the following picture. Then press number buttons to input
hour, minute and second.
DISC GOTO --:--
2. Track time search
Press GOTO button until the TV screen displays the following picture. Then press number buttons to input hour, minute and second.
TRACK GOTO --:--
3. Select a track
Press GOTO button until the TV screen displays
the following picture. Then press number buttons to input
the track number.
SELECT TRACK --/15
GOTO
NUMBER
SELECT
CURSOR
Zooming the Displayed Frame
DVD MPEG4 SVCD VCD
Capable of zooming in/out a certain dynamic or still frame.
1. Press ZOOM button when playing discs
and the TV screen displays:
2
The frame is magnified.
2. Press ZOOM button again and the TV
screen displays:
3
The frame is magnified the second time.
3. Press ZOOM button once again and the
TV screen displays:
4
The frame is magnified the third time.
4. Press ZOOM the fourth time and the TV
screen displays:
1/2
The frame is minified.
5. Press ZOOM button the fifth time and the
TV screen displays:
1/3
The frame is minified again.
6. Press ZOOM button the sixth time and the
TV screen displays:
1/4
The frame is minified the third time.
7. When the frame is magnified, press
CURSOR button to move the frame.
You can enjiy any desired part of the frame.
8. Press ZOOM button again and the frame
restores normal size.
ZOOM
SELECT
CURSOR
PLAY OPERATION
Power Spectrum Metre (PSM)
DVD SVCD VCD CD
1. Under normal playback, press PSM button to
open Power Spectrum Metre.
The Tv screen displays:
2. Press PSM button again to open the second
Power Spectrum Metre.
the Tv screen displays:
3. Press PSM button the third time to close
Power Spectrum Metre.
PSM
18
Virtual Keyboard
The brand-new Virtual Keyboard function enables you to
perform some easy operations and configurations when
enjoying a movie.
1. Under normal playback, press KEYBOARD button
and a virtual keyboard will appear on the screen as shown in the figure.
1
2
8
9
3
4
10
5
6
11
7
12
1 Step
4
Next
2
Forward Slow
Playback
5 Fast Forward
3
Play
6
Pause
7
Angle
10 Fast Reverse
8
Reverse Slow
Playback
11
Audio
9 Prev
12
Subtitle
2. Press CURSOR button to select the function you want
to perform and then press SELECT button to confirm.
For example: to select subtitle:
Press CURSOR button to select the subtitle icon. Each press of SELECT switches the subtitle settings alternately as follows:
SUBTITLE 01/03 SUBTITLE 02/03
SUBTITLE OFF SUBTITLE 03/03
3. Press KEYBOARD button again to exit the virtual
keyboard.
PLAY OPERATION
Disc INFO
The brand-new interface Disc INFO enables you to conveniently perform DVD disc functions of title, chapter, sound, subtitle, angle, title time, chapter time, repeat play and time display; or SVCD, VCD disc functions of track, disc time, track time, repeat play and time display.
For example: Playing DVD:
1. Press INFO button under normal playback and the
TV screen displays as follows: the data number are greatly decreased. The most distinct feature of MPEG4 is the high compression and clear imaging.
Furthermore, MPEG4 provides elastic specifications to adjust the stream according to the used requirements. The larger stream can be used when collecting private films; and the small stream can be used in network transferring, which make MPEG4 use widely.
MP3 utilizes the third layer audio compression mode of the international standard MPEG with the compression ration as
12:1. Employing MP3, one disc can record 600-minute music or 170 songs And the sound quality is the same as CD.
MENU
Title 02/04
Chapter 01/05
Audio English
Subtitle Off
BITRATE 85 TITLE TIME 0:01:25
2. Press UP/BOWN arrows to select the desired time
and press ENTRE button to confirm.
For example: press UP/DOWN arrows to select the
desired chapter and press ENTRE button to confirm.
The TV screen displays as follows:
MENU
Title 02/04
Chapter _0/05
Audio English
Subtitle Off
BITRATE 85 TITLE TIME 0:01:25
3. Press number buttons or UP/DOWN arrows to
select the desired chapter.
For example: press number button 0 and then 4, this player starts playing from the fourth chapter. The TV screen displays as follows:
JPEG (Joint Photographic Experts Group) is the most widely used picture compression and storage format today. Utilizing the high efficiency compression algorithm, JPEG compresses the original picture 15 to 20 times with very excellent picture quality. JPEG is featuring small size data, convenient application and supported by most picture processing software, so it is very fit to store photos.
The strong decoding capability of this player can decode and play the files with the above two formats.
During the course of playing, an operation menu will display and the details are as follows:
00:00 00:00
004/369
\PIC\
..
Du000
Du001
Du002
3
4
5
6
1
2
1 Status Window
Display the current
status information.
2 Directory Window
Display the current path.
3
File Window
Display the file in the current path.
4
Scroll bar Window
Indicate the position of the current file.
5
Information Window
Display The Information
Of The Current Operation.
6
Information window.
Displays the current operating prompts.
The displayed status information on the status window:
1 2 3 4
MENU
Title 02/04
Chapter 04/05
Audio English
Subtitle Off
BITRATE 85 TITLE TIME 0:30:35
00:57
002/073
03:31 128
The input number should be within the optional
numbers.
4. Press INFO button to exit the browser interface.
MPEG4,MP3 and JPEG File Playing
MPEG4 is the audio standard publicized by MPEG (Moving
Picture Experts Group) in November,1998.As the discrepant parts between frames of picture are only processed and the same parts are deleted,
19
5 6 7
3
2
1
Playback time of the current MP3
Total time of the current Mp3
The audio bit rate of the current MP3
(Generally the bit rate is 128Kbps, and sometimes it is VBR)
6
4
Current playback mode indicator
5
Track indicator
Volume indicator
7
Dynamic frequency spectrum indicator
1. Playing MPEG4 File
When you insert a MPEG4 disc, the TV screen displays the operation menu as shown in Figure A.
(The displayed contents vary with the disc.)
A:
00:00 00:00
001/004
\
Du000
Du001
Du002
Du003
B:
00:00 00:00
001/369
\Du000\
..
A/V
A/V
MP000
MP001
A/V
MP002
Press UP/DOWN arrows to select the desired directory. Press SELECT for verification. For example, you select the directory DU000 in Figure
A and press SELECT as shown in Figure B. The window returns back to the previous directory when you select [ .. ] in the first line or press
LEFT arrow.
Press UP/DOWN arrows in Figure B to select the desired MPEG4 file. Press SELECT for verification.
This player starts playing MPEG4 files.
2. MP3 file Playback
When you load the disc of Mp3 file into the unit,
it will search the disc information and display the operation menu as in the following illustration.
The operation steps are the same with those of
MPEG4.
00:00 00:00
001/369
\Du000\
MP3
..
CD000
CD001
MP3
MP3
CD002
3. Playing JPEG File
When you insert a disc with JPEG files, the TV screen displays the operation menu as shown in the figure. The operating means are the same as operating MPEG4 files except that the preview image will appear in the preview window when selecting a JPEG file.
00:00 00:00
004/369
\
..
Du000
Du001
Du002
Resolution 640 480
4. Plays a disc with both MP3 and JPEG files
If a disc is composed of both MP3 and JPEG files, you can enjoy both of them simultaneously. First you can play MP3 songs by following preceding instructions; then you can enter the directory with
JPEG files and view images by following preceding instructions.
OTHER BASIC OPERATING MEANS
1. Press the PREV or NEXT button to skip to last
or next page in the stop mode.
2. Press ANGLE to toggle the file playback mode and the directory playback mode.
PLAY OPERATION
JPEG FILES AND FUNCTIONS
1. Press the SUBTITLE button to switch different JPEG
display modes when playing JPEG files. There are 16
optional modes available.
2. When playing JPEG files, press the ZOOM button to start
zooming in/out function. Press the ZOOM button again to
stop zooming in/out function.
3. When the zooming in/out function is open, press the FWD
button to magnify the picture. It can magnify the frame twice
at most as the original one. Press the REV button to minify
the picture. It can minify the frame half at most as the
original one.
4. When playing JPEG files, Press the STOPbutton to stop
preview playback function. Atthe same time, all JPEG files
are displayed on the TV screen. One frame can display
up to 12pictures. The rest pictures are shown on the
next frame. Press the NEXT button to enter thenext frame.
Press the PREV button to enter the previous frame.
You can also press theNUMBER buttons or DIRECTION
arrow to select the desired picture. Press the SELECT
button to confirm.
5. Press the MENU button to exit preview playback
the preview playback mode.
6. Press the DIRECTION arrow to rotate a picture when
playing JPEG files.
ZOOM
ANGLE
FWD
REV
SUBTITLE
NUMBER
SELECT
CURSOR
MENU
PREV
NEXT
Headphone Enjoying
DVD SVCD VCD MPEG4 Mp3
1. If you want to use headphone to enjoy all by yourself, adjust the master volume to the minimum firstly, then insert the headphone plug into the headphone jack of this player and adjust the master
volume until suitable.
Earphone
NOTE
1. When the button is invalid, the TV screen
displays:
Press the effective button again.
20
FUNCTION SETUP
Function Setup
1. Press SETUP button, The TV set screen
displays:
CURSOR
SETUP
General Settings
SELECT
General Setup Page
TV Display Normal/LB
OSD Lang English
Screen Saver On
LED Control On
2. Press LEFT/RIGHT arrow to select the desired
channel to be changed.
For example, if you want to set this player's video, please press LEFT/RIGHT arrows to select VIDEO
SETUP PAGE. Press SELECT for verification. The video setup page displays on the screen.
Video Setup Page
Sharpness
Brightness
Contrast
Low
00
00
Hue
Saturation
00
00
Gamma Off
3. Press UP/DOWN arrow to select the desired
item you want to set and press SELECT.
For example, press UP/DOWN arrows to select
SHARPNESS and press SELECT. The sharpness appears on the screen.
Video Setup Page
Sharpness
Brightness
Contrast
Hue
Saturation
Gamma
High
Medium
Low
4. Press UP/DOWN arrow to select the desired
value. Press SELECT to confirm it.
For example: Press UP/DOWN arrow to select
"Medium", then press select, the TV screen display:
General Setup Page
TV Display Normal/LB
OSD Lang English
Screen Saver On
LED Control On
1. TV Display: To set the aspect ratio of this
player's output image.
Optional settings: NORMAL/PS, NORMAL/LB,
WIDE.
Default: NORMAL/LB.
NOTES
The playing effects are contingent upon the disc's recording aspect ratio. Some discs may not be played according to your selected aspect ratio.
WIDE is only applicable to the WIDE TV.
Please select the aspect ration in accordance with that of your TV.
2. OSD Lang: This item is used to set the prompts
language on the screen.
Optional settings: English.
Default: English.
3. Screen Saver: Open or close the screen saver
function.
Optional settings: OFF, ON.
Default: ON.
4.LED Control:Setup item applied to control On/Off playback LED on the front panel.
Optional settings: ON,OFF.
Default: ON
Video Setup Page
Sharpness
Brightness
Contrast
Hue
Medium
00
00
00
Saturation 00
Gamma Off
5. Press SETUP to exit the setup menu.
21
FUNCTION SETUP
Speaker Setup
B. Press UP/DOWN navigation keys to select the
desired item, then press LEFT/RIGHT navigation
keys to set the distance between the speaker and
listener.
C. After finishing setting, please press SELECT to exit.
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Subwoofer
Channel Delay
Stereo
Large
Small
Small
On
NOTE
The center/surround/subwoofer delay is effective
only for the corresponding speakers when the
delay is not set to OFF.
Audio Setup
1. Downmix Mode: To set this player's DOWNMIX
mode to change multi-channel audio into two
channel audio.
Optional settings: LT/RT, Stereo, V SURR,
5.1CH.
Default: Stereo.
NOTES
The 5.1CH mode needs disc's support. The number of actual output channels depends on the played disc.
2. Front Speaker: To set the front speaker's
sound filtering control.
Optional settings: Large, Small.
Default: Large.
3. Center Speaker: To set the center speaker's
sound filtering control.
4. Rear Speaker: To set the surround speaker's
sound filtering control.
Optional Center/Rear Speaker settings: Large,
Small, OFF.
Default setting of Center/Rear speaker: Small.
Center and Rear are effective only when
DOWNMIX MODE is set to 5.1CH.
5. Subwoofer: To open/close the bass speaker.
Optional settings: ON/OFF.
Default: ON.
Sub woofer
0cm
6. Channel Delay: To set delay time of the Center/
Surround/Subwoofer Speaker.
A. Press UP/DOWN navigation keys to select the
delay setting item. Press the SELECT navigation
key to enter the setting box.
Audio Setup Page
EQ Type
Sound Field
SPDIF Output
LPCM Out
Tone control
PRO Logic II
Dolby Digital Setup
Channel Trim
None
Off
Raw
48K
00
1. EQ type: To set EQ modes.
Optional settings: None, Rock, Pop, Live,
Dance, Techno, Classic, Soft.
Default: None.
2. Sound Field : To set different sound field effects.
Optional settings: Off, Concert, Living Room,
Hall, Bathroom, Cave, Arena, Church.
Default: Off.
the digital output.
Optional settings: SPDIF/Raw, SPDIF/PCM.
Default: SPDIF/Raw.
4. LPCM Out To set the output frequency of the LPCM audio data to fit for different power amplifiers.
Optional settings: 48K, 96K.
Default: 48K.
5. TONE control: This item is used to set the tone level to match your diapason when you are singing.
Method to adjust tone:
A. Press UP/DOWN cursor button to select TONE item in
AUDIO SETUP PAGE, and then press SELECT button to enter the adjust ment menu.
B. Press LEFT/RIGHT cursor button to adjust the setting value.
C. Press SELECT button to return to AUDIO SETUP
PAGE after adjustment are well done.
22
FUNCTION SETUP
6. PRO Logic II: To set 2CH music into the virtual
5CH music which can be played by multi-
channel speakers. Press UP/DOWN navigation
keys in the AUDIO SETUP PAGE to select PRO
Logic II, then press the SELECT navigation key
to enter the PRO Logic II SETUP page.
PRO Logic II is effective only when the DOWNMIX mode is set to 5.1CH and SPDIF is set to RAW.
PRO Logic II Config
PRO Logic II
Mode
Panorama
Dimension
Center Width off music off
00
03
E. Central Width: To set the central width.
It is to divide the center channel signals to the
left and right channels. Therefore, the signals
are sent out from the front speakers in
different degrees.
Optional settings: Level0, Level1, Level2,Level3,
Level4, Level5, Level6,Level7.
Default: Level3.
7. S
navigation keys to select DOLBY DIGITAL
SETUP, then press the SELECT navigation key
to enter the DOLBY DIGITAL SETUP page.
A. Dual Mono : To set the output means of the
left or right audio when playing a Dolby disc
withse parate two-channel audio
A. PRO Logic II: To set PRO Logic II to ON or
OFF. If the TITLE does not support this
function, we recommend that you set this item
to AUTO because it would become worse if the
processing effects were added forcibly.
Optional settings: ON, OFF, AUTO.
Default: OFF.
B. Mode: To set the modes of PRO Logic II. The
music mode means that the sound from all
speakers arrives at the same time without delay.
The movie mode means that delay of 10ms is
added to the surround channel. The PRO
LOGIC mode virtualizes PRO LOGIC I
(utilizing PRO Logic II). The AUTO mode
means a mode is selected automatically
according to the disc.
Optional settings: MUSIC, MOVIE, PRO Logic,
AUTO.
Default: Music.
C. Panorama: To set the panorama mode to ON
or OFF. This mode is to extend the front stereo
to the two sides in order to achieve excellent
surround effects.
Optional settings: ON, OFF.
Default: OFF.
D. Dimension: To set the size. It is similar to the
balance control of the front and surround
speakers which gradually adjust the front and
rear sound fields. There are 7 steps to adjust.
Optional settings: Size-3, Size-2, Size-1, Size0,
Size1, Size2, Size3.
Default: Size0.
Dolby Digital Setup
Dual Mono
Dynamic
Stereo
Optional settings: Stereo, L-Mono,R-Mono,
Mix-Mono.
Default: Stereo.
compression ratio to get different compression result.
Optional settings: OFF 1/8 1/4 3/8 1/2
5/8 3/4 7/8 FULL
Default: OFF.
8. Channel Trim: To set volume of each individual
channel.
A. Press UP/DOWN navigation keys to select
CHANNEL TRIM, then press the SELECT
navigation key to select ENTER SETUP PAGE
as shown in the TV screen:
B. Press LEFT/RIGHT navigation keys to select
the desired channel to adjust.
C. Press UP/DOWN navigation keys to raise or
lower volume of the channel.
D. Press SELECT to return to the audio setup
page.
0.0 DB
23
FUNCTION SETUP
Video Setup
Video Setup Page
Sharpness Low
Brightness
Contrast
Hue
Saturation
Gamma
00
00
00
00
Off
1. Sharpness: Used to set the sharpness of video
outputs.
OPTIONS: High, Medium, Low.
Default: Low.
2. Brightness: Used to set the brightness of video
outputs.
3. Contrast: Used to set the contrast of video
outputs.
4. Hue: Used to set the hue of video outputs.
5. Saturation: Used to set the saturation of video
outputs.
Brightness, contrast, hue and saturation adjusting means:
A. Press UP/DOWN arrow in the video setup menu
to select the desired item you want to adjust. Press
SELECT button to enter the item's adjustment.
B. Press LEFT/RIGHT arrow to adjust the setting
value.
C. After finishing adjustment, press SELECT arrow
to return to the video setup menu.
6.Gamma emendation:This item is used to setup the
Gamma value of video output. Selectable setup values:
High, Medium, Low, Off.
Default:Off
Initial Setup
on the screen and this player enter the PBC mode; if the PBC is OFF, this player plays the disc by its sequence.
Optional settings: On, Off.
Default: On.
3. Audio: To set the preference audio language
when playing.
4. Subtitle: To set the preference subtitle
language when playing.
Optional subtitle languages:
English, French, German, Spanish, Italian,
Portuguese, Russian, Chinese, Others, Off subtitle language default: Off.
5. Disc Menu Language: To set the preference disc
menu language when playing.
Optional audio/disc menu languages:
English, French, German, Spanish, Italian,
Portuguese, Russian, Chinese, Others,
Audio/disc menu language default: English.
NOTES
Audio/subtitle/disc menu languages are effective to DVD only.
If the disc does not record your desired language, the player will select the disc-specified languages to play.
Selecting other languages: Press UP/DOWN
ARROW to move the cursor to OTHER item, press SELECT. Press NUMBER buttons to enter your desired language codes, then press SELECT.
6. Parental : To set the parental control ratings
to prevent children from watching the
restricted contents. (In case the disc supports
this function.)
Optional settings: KID , G, PG, PG13, PGR, R, NC17,
ADULT, OFF.
Default: OFF.
NOTE
When changing the parental control ratings, a password is needed. Refer to the following password item for detailed settings.
7. Password: To set a four digit password to enable
you to change the parental control ratings.
Default: 7890.
Preference Page
TV Type
PBC
Audio
Subtitle
Disc Menu
Parental
Password
Default
Ntsc
On
English
Off
English
Off
1. TV Type: To set the output video system of
this player.
Optional settings: AUTO,PAL,NTSC.
Default: NTSC.
2. PBC To set the PBC status.
When playing Super VCD or VCD2.0 discs, if the PBC is ON, the menu image displays
Old Password
New Password
Confirm PWD
OK
8. Default: To restore all settings to the default
value except for the parental control and
password settings.
24
OTHERS
Useful Notes
In order to prolong the service life of your player, it is recommended to wait at least 30 seconds before you turn it on again after switching it off.
Turn off power after operation.
Only use the power supply of the nominal voltage, otherwise the player will not be operational or even be
damaged.
Some functions of the player may not be applicable to some discs.
In case of occasional player halt, please turn it off and turn it on again.
This player cannot play some SVCD discs with the CVD format.
Troubleshooting
Please check for causes of problems in accordance with the following chart before contacting any maintenance personnel.
Symptom Cause Correction
2. Clean your disc.
3. Interlacing/Progressive mode of
Player and TV not correspond.
1. TV system not right.
No colour
2. TV set colour not properly
2. Readjust colour of your TV set.
adjusted.
1. Clean your disc.
1. Disc warped or dirty.
2. Reload a disc with label side facing up.
for 1 hour.
Failure
2. Operating distance of remote
control more than 3 metres away
from TV set.
3. Batteries low.
Refer to page5 for details.
2. Replace the battery.
from outside.
Picture rolling
1. TV set system not properly
adjusted.
3. Power off for 1~2 minutes to turn it
on again.
1. Readjust TV system.
If the above corrections cannot get rid of the troubles or the symptoms are special, please contact with the local service personnel.
25
OTHERS
Specifications
Disc Types
DVD AUDIO
DVD VIDEO
Divx* , MPEG4*
Super VCD
VCD1.0, 1.1, 2.0
CD-DA
Mp3
Analog audio output stereo output, 5.1CH output, headphone output
Digital audio output coaxial output, optical output
Composite video output
Output
Progressive video output Y Pb Pr
S-Video output Y, C
Component video output Y Cb Cr
Video amplitude 1.0Vp-p (75ohm load)
Video
C output amplitude 0.268Vp-p (75ohm load)
Frequency 20Hz~20KHz (+/- 1dB)
Audio
Total harmonic distortion less than 0.01%
Dimensions 270*198*48 (mm)
Operating
Temperature
5 C~35 C
Operating
Humidity
15~75% (no condensation)
*
DivX version is still upgrading continuously and the latest version of this unit is DivX 5.1.
Some discs labelled with MPEG4 on the market actually are and others, with which are incompatible. Pleases take care when buying discs.
The design and explanation of this product are subject to change and renovate without notice.
We cannot ensure all the discs are fluently read because of the disc quality, disc make quality and format difference.
As for the special make of some discs, some functions can not be realized when playing, which is not the malfunction of the unit.
26
OTHERS
Terms
525/60
A scan system with 525 horizontal lines and 60 interlacing fields (30 frames) per second. Applied by NTSC.
625/50
A scan system with 625 horizontal lines and 50 interlacing fields (25 frames). Applied by PAL and SECAM.
ANALOG
A level theoretically changes infinitely in time and space. As compared to DIGITAL.
ANGLE
A specific view of a scene recoded from a specific angle in
DVD-Video. When viewing the specific scenes, different angles can be selected.
CD
Abbreviation for Compact Disc. A laser disc storage format developed by Philips and Sony.
CD-DA
Abbreviation for Compact Disc Digital Audio. The original music CD format storing audio information as digital PCM data.
CD-R
The extension of the CD format. Data can be recorded once by utilizing coloring matter subliming technology.
CD-ROM
The extension of the CD-DA format. The computer data is stored in the digital format.
CHAPTER
Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters.
Each chapter is assigned a chapter number enabling you to locate the chapter you want.
COMPRESSION
A process which eliminates redundancy of digital data to reduce the necessary storing or transmitting data size.
Lossless compression only eliminates the enough redundancy to make date restore correctly. Lossy compression sacrifices the additional data to achieve a larger compression.
CONTRAST
The range between the brightest and the darkest of an image.
DAC Digital-to-analog converter)
A circuit converting the digital data (audio or video) to analog data.
DIGITAL
Expressed by numerals. For example, a computer utilized a group of discrete numeric values. The analog data can be digitized by sampling.
Dolby Digital
An audio encoding system developed by Dolby Laboratories and recognized as the international standards. Dolby Digital is the most common system of the DVD-Video encoding audio and the normalized audio compression system of
525/60 (NTSC) CD.
27
DOWNMIX
Changing multi-channel audio to dual channel stereo audio by utilizing Dolby Surround processing.
DVD
Abbreviation of Digital Video Disc or Digital Versatile Disc.
An audio/video/data storage system based on 12cm and
8 cm disc.
DVD-R
A DVD version. Data can be recorded once by utilizing coloring matter subliming technology.
HUE
The color of ray or pixel. The color characteristics are depending on the ray's main elements' wavelength.
INTERLACE
A scan system. In scanning, the technique of using more than one vertical scan to reproduce a complete image. In television, 2:1 interlace is used, giving two vertical scans
(fields) per frame; one field scans odd lines, and one field scans the even lines of the frame.
ISO 9660
An international standard for the file system used in
CD-ROM.
Macrovision
A recording protection technology. It alters the signals. The playback looks normal in most TVs. However, when the recorded materials are played back, pictures look very distorted and invisible. Macrovision utilizes the characteristics of the AGC circuit and VCR color synchronous decoding circuit to interfere recording.
MPEG Moving Pictures Expert Group)
An international committee who established a series of compression stands of MPEG audio and video.
MULTIANGLE
Various angles for the scene (viewpoints of the video camera) are recorded on some DVDs.
MULTILANGUAGE
Several languages for the audio track or subtitles in a picture are recorded on some DVDs.
SATURATION
The color's intensity or brightness.
SIGNAL-TO-NOISE RATIO
Ratio of pure signals to irrelevant noise like tape noise or video interference. It is measured by dB. The analog recordings always have noise. The digital recordings have no noise provided that data are filtered at the front end without compression.
SURROUND SOUND
There are speakers in front of and behind audiences to create a multi-line audio system composed of surround simulation and directional audio source sound fields.
TITLE
The longest section of a picture or a music piece on a
DVD; a movie, etc., for a picture piece on video software; or an album, etc., for a music piece on audio software.
Each title is assigned a title number enabling you to locate the title you want.
TRACK
Sections of a picture or a music piece on a CD or VIDEO
CD. Each track is assigned a track number enabling you to locate the track you want.
Language Code List
Code
Language Name
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali;Bangla
Tibetan
6978
6979
6983
6984
6985
7065
7073
7074
6779
6783
6789
6865
6869
6890
6976
6665
6669
6671
6672
6678
6679
6682
6765
6565
6566
6570
6577
6582
6583
6588
6590
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
Code
Language Name
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Hungarian
Armenian
Interlingua
Indonesian
Icelandic
Iitalian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Panjabi
Polish
Pashto,Pushto
7686
7771
7773
7775
7776
7778
7779
7782
7583
7585
7589
7665
7678
7679
7684
7473
7487
7565
7575
7576
7577
7578
7579
7285
7289
7365
7378
7383
7384
7387
7465
7783
7784
7789
7865
7869
7876
7879
7982
8065
8076
8083
28
OTHERS
Code
Language Name
8479
8482
8484
8487
8575
8582
8590
8673
8386
8387
8465
8469
8471
8472
8473
8475
8476
8679
8779
8872
8979
9072
9085
8375
8376
8377
8378
8379
8381
8382
8385
8084
8185
8277
8279
8285
8365
8368
8372
8373
Serbian
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sanskrit
Sindhi
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement