Toshiba teli BC505LMCF Instruction Manual

Add to My manuals
70 Pages

advertisement

Toshiba teli BC505LMCF Manual: Camera Link, Global Shutter, Color | Manualzz
BC Series
CMOS Camera
Instruction Manual
Model
Mono Camera
Color Camera
: BC302LMG / BC505LMG
: BC505LMCG / BC505LMCF
Thank you for purchasing our product.
Before using this CMOS camera, Please read through this instruction
manual carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Information contained in this document is subject to change without prior notice.
Standard name might be trade mark of each company.
Copyright © 2016-2018 Toshiba Teli Corporation, All Rights Reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Contents
Contents ............................................................................................................................................. 1
Safety Precautions ............................................................................................................................. 3
General Handing......................................................................................................................... 4
CASES FOR INDEMNITY (LIMITED WARRANTY) .................................................................. 6
RESTRICTION FOR USE .......................................................................................................... 7
Notes on using this product ........................................................................................................ 8
Specifications ................................................................................................................................... 13
Overview ................................................................................................................................... 13
Features .................................................................................................................................... 13
Configuration ............................................................................................................................ 15
Connection ................................................................................................................................ 16
Connector Pin Assignment ....................................................................................................... 17
Outline Drawing ........................................................................................................................ 19
General Specifications .............................................................................................................. 20
I/O Specification........................................................................................................................ 23
Timing Specification.................................................................................................................. 25
Typical Spectral Response ....................................................................................................... 27
Operating Ambient Conditions ................................................................................................. 28
Command Commnucation Protocol ................................................................................................. 29
Legacy Protocol ........................................................................................................................ 30
GenCP ...................................................................................................................................... 31
Register Map .................................................................................................................................... 33
IIDC2 Address .......................................................................................................................... 33
GenCP Address ........................................................................................................................ 37
Legacy Address ........................................................................................................................ 38
Functions.......................................................................................................................................... 40
TransportLayerControl .............................................................................................................. 42
DeviceControl ........................................................................................................................... 43
Scalable .................................................................................................................................... 45
Binning ...................................................................................................................................... 46
Decimation ................................................................................................................................ 47
Reverse..................................................................................................................................... 48
PixelFormat ............................................................................................................................... 49
TestPattern ............................................................................................................................... 50
AcquisitionControl ..................................................................................................................... 51
TriggerControl ........................................................................................................................... 51
ExposureTimeControl ............................................................................................................... 54
DigitalIOControl ........................................................................................................................ 55
TimerControl ............................................................................................................................. 56
Gain .......................................................................................................................................... 57
BlackLevel................................................................................................................................. 58
Gamma ..................................................................................................................................... 58
1 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Sharpness ................................................................................................................................. 59
BalanceRatio ............................................................................................................................ 59
ALCControl ............................................................................................................................... 61
LUTControl................................................................................................................................ 63
SequentialShutterControl ......................................................................................................... 64
DPCControl ............................................................................................................................... 65
UserSetControl ......................................................................................................................... 66
Status / Expanded status.......................................................................................................... 67
Baudrate ................................................................................................................................... 67
Warranty rules .................................................................................................................................. 68
Repair ............................................................................................................................................... 69
2 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Safety Precautions
Before using this product, read these safety precautions carefully. Important information is shown in this
Instruction Manual to protect users from bodily injuries and property damages, and to enable them to use the
product safely and correctly.
Please be sure to thoroughly understand the meanings of the following signs and symbols before reading
the main text that follow, and observe the instructions given herein.
[Definition of Safety Signs]
Safety Signs
WARNING
CAUTION
Description
Indicates a potentially hazardous situation that may result in death or serious
injury (*1) in the event of improper handling.
Indicates a potentially hazardous situation that may result in light to moderate
injuries (*2) or only in property damage (*3)in the event of improper handling.
Notes *1:“Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature),
electric shock, broken bones, poisoning, etc., which leave after-effects or which require
hospitalization or a long period of outpatient treatment of cure.
*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require
hospitalization or long-term treatment.
*3: "Property damage" refers to cases of extensive damage involving damage to buildings,
equipment, farm animals, pet animals and other belongings.
[Explanation of Safety Symbols]
Safety Symbols
PROHIBITED
MANDATORY
Description
This sign indicates PROHIBITION (Do not).
The content of prohibition is shown by a picture or words beside the symbol.
This sign indicates MANDATORY ACTION (You are required to do).
The content of action is shown by a picture or words beside the symbol.
3 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
General Handing
WARNING
Unplug
 Stop operation immediately when any abnormality or defect occurs.
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or
foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may
result.
Be always sure to disconnect the power cable from the wall socket at once and contact
your dealer.
 Do not use the equipment in locations subject to water splashes.
Otherwise, fire or electric shock may result.
Do not get wet
Never pull apart
Avoid
Avoid
Do not touch
 Do not disassemble, repair, or modify the equipment.
Otherwise, fire or electric shock may result.
For internal repair, inspection, or cleaning, contact your sales representative.
 Do not place anything on the equipment.
If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric
shock may result.
 Do not install the equipment in an unstable or inclined location or locations
subject to vibration or impact.
Otherwise, the equipment may topple over and cause personal injury.
 During an electrical storm, do not touch the power cable and the connection
cable.
Otherwise, an electric shock may result.
 Use the specified voltage.
Use of an unspecified voltage may result in fire or electric shock.
Instruction
 Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted,
bundled, placed under heavy objects or heated the power cable and the
Avoid
connection cable.
Otherwise, fire or electric shock may result.
4 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
CAUTION
Instruction
Avoid
 Observe the following when installing the equipment:
·Do not cover the equipment with a cloth, etc.
·Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
 Do not place the equipment in locations subject to high moisture, oil fumes,
steam, or dust.
Otherwise, fire or electric shock may result.
 Do not install the equipment in locations exposed to direct sunlight or humidity.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Avoid
 Use only specified the power cable and the connection cables.
Otherwise, fire or electric shock may result.
Instruction
 Do not give strong impact against the equipment.
It may cause the trouble.
Avoid
Instruction
 When performing connection, turn off power.
When connecting the power cable and the connection cable, turn off the equipment
power.
Otherwise, fire or electric shock may result.
 Do not expose its camera head to any intensive light (such as direct sunlight).
Otherwise, its inner image pickup device might get damaged.
Avoid
 Avoid short-circuiting signal output.
Otherwise, a malfunction may occur.
Avoid
Avoid
Instruction
 Avoid giving a strong shock against the camera body.
It might cause a breakdown or damage. If your camera is used in a system where its
camera connector is subjected to strong repetitive shocks, its camera connector is
possible to break down. If you intend to use your camera in such a situation, if possible,
bundle and fix a camera cable in the place near the camera, and do not transmit a
shock to the camera connector.
 Contact your sales representative to request periodic inspection and cleaning
(every approx five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.
5 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
CASES FOR INDEMNITY (LIMITED WARRANTY)
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the
user in the following cases.
● In the case damage or losses are caused by natural disasters, such as an earthquake and thunder, fire, or
other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme
operating conditions.
● In the case of indirect, additional, consequential damages (loss of business interests, suspension of
business activities) are incurred as result of malfunction or non-function of the equipment, we shall be
exempted from responsibility for such damages.
● In the case damage or losses are caused by failure to observe the information contained in the
instructions in this instruction manual and specifications.
● In the case damage or losses are caused by use contrary to the instructions in this instruction manual and
specifications.
● In the case damage or losses are caused by malfunction or other problems resulting from unintended use
of equipment or software etc. that are not specified.
● In the case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).
● Expenses we bear on this product shall be limited to the individual price of the product.
● The item that is not described in specifications of this product is out of the guarantee.
● The case of damages or losses which are caused by incorrect connection of the cable is out of the
guarantee.
6 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
RESTRICTION FOR USE
● Should the equipment be used in the following conditions or environments, give consideration to safety
measures and inform us of such usage:
1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.
2. Use of the equipment in applications expected to cause potential hazard to people or property, which
require special safety measures to be adopted.
● This product can be used under diverse operating conditions. Determination of applicability of equipment or
devices concerned shall be determined after analysis or testing as necessary by the designer of such
equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure
the performance and safety of the equipment or devices.
● This product is not designed or manufactured to be used for control of equipment directly concerned with
human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety
(*2). Therefore, the product shall not be used for such applications.
(*1): Equipment directly concerned with human life refers to.
- Medical equipment such as life-support systems, equipment for operating theaters.
- Exhaust control equipment for exhaust gases such as toxic fumes or smoke.
- Equipment mandatory to be installed by various laws and regulations such as the Fire Act or Building
Standard Law
- Equipment related to the above
(*2): Equipment relating to maintenance of public services/functions involving factors of safety refers to.
- Traffic control systems for air transportation, railways, roads, or marine transportation
- Equipment for nuclear power generation
- Equipment related to the above
7 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Notes on using this product
● Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.
● Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular,
do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high
temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera
conditions (such as increased gain). However, such phenomena are not malfunctions.
● Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area. However,
this is not because of a fault of the camera.
In addition, depending on the lens you use, the performance of the camera may not be brought out fully due
to deterioration in resolution and brightness in the peripheral area, aberration and others.
Be sure to check a combination with the camera by using the lens and lightning you actually use.
When installing a lens in the camera, make sure carefully that it is not tilted.
In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be
removed.
Install a next lens; its dimension of protrusion from bottom of the screw is equal to or less than 7.9mm. If a
lens does not stand to this condition, it might not be installed to this camera.
C-mount lens
Bottom of
the screw
10mm or less
less
7.9mm
● Mounting to pedestal
When mounting this product to a pedestal, make sure carefully that lens doesn’t touch with the pedestal.
8 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● Do not expose the camera's image-pickup-plane to sunlight or other intense light directly
Its inner CMOS sensor might be damaged.
● Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.
● Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may
be generated on the screen. If this occurs, move the camera or the cable.
● Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
● If the equipment is not to be used for a long duration
Turn off power to the camera for safety.
● Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may
damage or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.
9 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● Disposal
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance
with the laws and regulations of your country and/or municipality concerning environmental contamination.
This product is marked this symbol to subject to EU Waste Electrical & Electronic Equipment (WEEE)
directive.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more
detailed information about the take-back and recycling of this product, please contact
your supplier where you purchased the product.
“This symbol is applicable for EU member states only”
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communication.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be require to correct the interference at his own expense.
10 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
[Phenomena specific to CMOS sensor]

Defective pixels
A CMOS image sensor is composed of photo sensor pixels in a square grid array. Due to
the characteristics of CMOS image sensors, over- or under-driving of the pixels results in
temporary white or black areas (as if these are noises) appearing on the screen. This
phenomenon, which is not a defect is exacerbated under higher temperatures and long
exposure time.

Image shading
The brightness of the upper part of the screen may be different from that of the lower part. Note
that this is a characteristic of a CMOS image sensor and is not a fault.
11 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
10
中华人民共和国
环保使用期限
环保使用期限标识,是根据电子信息产品污染控制管理办法以及,电子
信息产品污染控制标识要求(SJ/T11364-2014)、电子信息产品环保使用
期限通则,制定的适用于中国境内销售的电子信息产品的标识。
电子信息产品只要按照安全及使用说明内容,正常使用情况下,从生产
月期算起,在此期限内,产品中含有的有毒有害物质不致发生外泄或突
变,不致对环境造成严重污染或对其人身、财产造成严重损害。
产品正常使用后,要废弃在环保使用年限内或者刚到年限的产品时,请
根据国家标准采取适当的方法进行处置。
另外,此期限不同于质量/功能的保证期限。
The Mark and Information are applicable for People's Republic of
China only.
部件名称
<产品中有毒有害物质或元素的名称及含量>
有毒有害物质或元素
六价铬
多溴联苯
铅(Pb)
汞(Hg)
镉(Cd)
(Cr(VI))
(PBB)
多溴二苯醚
(PBDE)
相机本体
×
○
○
○
○
○
本表格依据SJ/T 11364的规定编制
○:表示该有毒有害物质在该部件所有均质材料中的含量均在电子信息产品中有毒有害物质的
限量要求标准规定的限量要求(GB/T26572)以下
×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出电子信息产品中有毒有害
物质的限量要求标准规定的限量要求(GB/T26572)
This information is applicable for People's Republic of China only.
リサイクルに関する情報(包装物)
有关再利用的信息(包装物)
Information on recycling of wrapping composition
箱/箱子/Box
内部緩衝材料・袋
内部缓冲材料·袋
Internal buffer materials・Bag
ペーパーボード
纸板
Paper board
12 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Specifications
Overview
This BC series is an integrated-(one-body)-type camera that adopts a global shutter CMOS sensor.
BC302LM (3M 1/1.8 type, monochrome), BC505LM (5M 2/3 type, monochrome).
Suffix [G] is attached to the monochrome models, suffix [CG] or [CF] are attached to the color models.
Features
● High frame rate and high resolution
Supporting high frame rate, BC302LMG 56fps, BC505LMG / BC505LMCG / BC505LMCF, 36fps.
● Global shutter
As it employs a global electronic shutter similar to a CCD image sensor, clear images of even fast-moving
object are obtainable with less blur.
●Camera Link interface (power supply type)
By using a Camera Link-capable frame grabber board to which power can be supplied, high-speed transfer
of captured images to a PC as well as various types of camera control from the PC are allowed. Power can
also be supplied to the camera with only one cable.
● Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger signal.
Trigger control from PC is available as well.
● Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output area. And
reduces occupied data rate of Gigabit Ethernet by reducing horizontal output area.
● Binning mode
In this mode, pixel data is combined by vertical and horizontal.
13 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● Decimation mode
Camera reads all effective areas at high speed by skipping lines.
(Decimation mode is supported only in color models)
●Color processing
Color models have built in color processing. The white balance function also works in Bayer output.
● IR-cut filter
Build-in IR-cut filter models are optional for color models.
Suffix [F] is attached to the model name of built-in IR-cut filter model. (e.g. BC505LMCF)
* Suffix [F] is not shown in the common part of specifications.
● Compact and lightweight
This camera is compact and lightweight; it is easy to integrate into industrial equipment.
● EU RoHS & Chinese ROHS
14 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Configuration
The system configuration of this camera series is as follows;
This camera does not include any accessories. Please prepare other equipments separately.
● Camera:
This product. (BC series)
● Camera mounting kit CPT8560 (*1):
To fix a camera to a tripod; attach this to the bottom of the
camera.
*1: Optional part. Contact your dealer / distributor for details of option units.
15 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Connection
BC302LMG/BC505LMG/BC505LMC
Power-over Camera Link Cable
PC etc.
DC +12V
Frame Grabber Board complied with PoCL
16 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Connector Pin Assignment
Please confirm the power supply of the camera cuts when the connector is connected or pulls out. It causes
the breakdown etc.
(1) Video output/controlling/power supply connector: (Camera Link Base Configuration) CAMERA LINK
Connector model: HDR-EC26FYTG2+ (Manufactured by Honda Connectors)
Pin No.
I/O
信号名
Pin No.
I/O
信号名
1
-
DC+12V(PoCL)
14
-
GND
2
O
X0-
15
O
X0+
3
O
X1-
16
O
X1+
4
O
X2-
17
O
X2+
5
O
X CLK-
18
O
X CLK+
6
O
X3-
19
O
X3+
7
I
Ser TC+
20
I
Ser TC-
8
O
Ser TFG-
21
O
Ser TFG+
9
I
CC1- (TRIG)
22
I
CC1+ (TRIG)
10
I
CC2+
23
I
CC2-
11
I
CC3-
24
I
CC3+
12
I
CC4+
25
I
CC4-
13
-
GND
26
-
DC+12V(PoCL)
*CC2+, CC2-, CC3+, CC3-, CC4+ and CC4- are not used.
Bit assignment of camera output
Port / Bit
8bit
10bit
12bit
Port / Bit
8bit
10bit
12bit
Port / Bit
8bit
10bit
12bit
Port A0
A[0]
A[0]
A[0]
Port B0
B[0]
A[8]
A[8]
Port C0
n/a
B[0]
B[0]
Port A1
A[1]
A[1]
A[1]
Port B1
B[1]
A[9]
A[9]
Port C1
n/a
B[1]
B[1]
Port A2
A[2]
A[2]
A[2]
Port B2
B[2]
n/a
A[10]
Port C2
n/a
B[2]
B[2]
Port A3
A[3]
A[3]
A[3]
Port B3
B[3]
n/a
A[11]
Port C3
n/a
B[3]
B[3]
Port A4
A[4]
A[4]
A[4]
Port B4
B[4]
B[8]
B[8]
Port C4
n/a
B[4]
B[4]
Port A5
A[5]
A[5]
A[5]
Port B5
B[5]
B[9]
B[9]
Port C5
n/a
B[5]
B[5]
Port A6
A[6]
A[6]
A[6]
Port B6
B[6]
n/a
B[10]
Port C6
n/a
B[6]
B[6]
Port A7
A[7]
A[7]
A[7]
Port B7
B[7]
n/a
B[11]
Port C7
n/a
B[7]
B[7]
*The port assignment is based on CamraLink standard.
17 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
(2) Signal input/output connector
Connector model: HR10A-7R-6PB(73) (Manufactured by HIROSE ELECTRIC CO.)
Conformed Plug model in cable: HR10A-7P-6S(73) (Manufactured by HIROSE ELECTRIC CO.)
* This camera does not include the the conformed connector.
Pin No.
I/O
Signal
Feature
1
O
Line 4
GPIO Output
2
-
IO GND
GPIO_Ground
3
-
GND
Ground
4
I
Line 5
External Trigger Input
5
I/O
Line 6
GPIO_Input
6
-
+12V
18 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
/ Output
DC+12V
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Outline Drawing
19 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
General Specifications
Model Name
BC302LMG
BC505LMG
Imager
CMOS image sensor
Maximum number of Video out pixels
2048×1536
2448×2048
Optical Size
1/1.8 type
2/3 type
Scanning area (H) x (V) [mm]
7.12×5.33
8.50×7.09
(H) x (V)
Pixel size (H) x (V) [μm]
3.45×3.45
Scan method
Progressive
Electronic shutter method
Global shutter
Aspect ratio
Sensitivity
Minimum illuminance(*1)
4:3
6:5
700lx,F5.6,1/52s
400lx,F5.6,1/32.62s
6lx
3lx
DC12 V ± 10%
Power supply
(*it is possible to supply the power to the camera, from Camera Link connector
with Power over Camera Link standard or I/O connector)
Power consumption(*2)
1.8W (Max)
Interface
CameraLink Base Configuration
Transmission speed
41.5 / 64 / 83 MHz
Image output format
Maximum Frame rate
(*2)
Dimaensions
x 1 / 2 / 3 tap
Mono8 / Mono10 / Mono12
56.13 fps
36.00 fps
29mm(W) x 29mm(H) x 26.5mm(D) (Not including protrusion)
Approximately 45g
Mass
Lens mount
C mount
Flange back
17.526mm
Camera body grounding
insulation status
Conductive between circuit GND and camera body
* Underbar is factory default
(*1) F1.4, Gain +24dB, Video level 50%
(*2) at all pixels readout
20 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Model Name
With AR coated glass
BC505LMCG
With IR cut filter
BC505LMCF
Imager
CMOS image sensor
Maximum number of Video out pixels
2448×2048
(H) x (V)
Optical Size
2/3 type
Scanning area (H) x (V) [mm]
8.50×7.09
Pixel size (H) x (V) [μm]
3.45×3.45
Scan method
Progressive
Electronic shutter method
Global shutter
Aspect ratio
6:5
Sensitivity
With AR coated glass
1150lx,F5.6,1/32.62s
With IR cut filter
1400lx,F5.6,1/32.62s
Minimum illuminance(*1)
With AR coated glass
3lx
With IR cut filter
DC12 V ± 10%
Power supply
(*it is possible to supply the power to the camera, from Camera Link connector
with Power over Camera Link standard or I/O connector)
Power consumption(*2)
2.2W (Max)
Interface
Transmission speed
CameraLink Base Configuration
41.5 / 64 / 83 MHz
Image output format
Bayer8 / Bayer10 / Bayer12
Maximum Frame rate
36.00 fps
(*2)
Dimaensions
x 1 / 2 / 3 tap
29mm(W) x 29mm(H) x 26.5mm(D) (Not including protrusion)
Approximately 45g
Mass
Lens mount
C mount
Flange back
17.526mm
Camera body grounding
insulation status
Conductive between circuit GND and camera body
* Underbar is factory default
(*1) F1.4, Gain +24dB, Video level 50%
(*2) at all pixels readout
21 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Notes on combination of C-mount lens:
- Depending on the lens you use, the performance of the camera may not be brought out fully due to the deterioration in
resolution and brightness in the peripheral area, occurrence of a ghost, aberration and others. When you check the
combination between the lens and camera, be sure to use the lens you actually use.
- In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be removed.
- As for the C-mount lens used combining this camera, the projection distance from bottom of the screw should use
7.9mm or less.
C-mount lens
Bottom of
the screw
10mm or less
less
7.9mm
22 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
I/O Specification
● Signal Specification
● Line4 (GPIO Output, I/O connector, 1pin)
Signal level:
5V CMOS
Maximum current:
+/- 32mA (drive current)
Signal Polarity:
Factory setting: Low active (it is possible switching by camera settings)
Ouput signal:
TIMER0 ACTIVE
USER OUTPUT
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
● Line5 (External Trigger Input, I/O connector, 4pin)
Input circuit:
LVTTL
Signal level:
Low 0 to 0.5V、High 2.0 to 24.0V
Signal Polarity:
Factory setting: Low active (it is possible switching by camera settings)
Pulse width:
50μs (minimum)
Inside
DC3.3V
10kΩ
4
3
0V
Notes of external trigger signal:
- Depending on cable length, kind of cable and input current of trigger input line, external trigger signal may not be
accepted by camera.
- Line5 and Line6 have a different input level. Please use input level within the voltage described in this specification.
may not receive EXT_TRIG signal. Please confirm it before use.
23 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● Line6 (GPIO In / Out, I/O connector, 5pin)
● Input signal specification
Input circuit:
5V CMOS
Signal level:
Low 0 to 0.5V、High 4.0 to 5.0V
Signal Polarity:
Factory setting: Low active (it is possible switching by camera settings)
Pulse width:
50μs (minimum)
Notes of external trigger signal:
- Depending on cable length, kind of cable and input current of trigger input line, external trigger signal may not be
accepted by camera.
- Line5 and Line6 have a different input level. Please use input level within the voltage described in this specification.
may not receive EXT_TRIG signal. Please confirm it before use.
● Output signal specification
Input circuit:
5V CMOS
Maximum current:
+/- 32mA (drive current)
Signal Polarity:
Factory setting: Low active (it is possible switching by camera settings)
Ouput signal:
TIMER0 ACTIVE
USER OUTPUT
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
LineModeAll
Inside
DC5.0V
10kΩ
5
3
24 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Timing Specification
For getting fastest farmerate, shatter speed ≦ readout time.
(1) Horizontal timing
● All pixel readout (* following timing figure: BC505LMG 3tap)
1CLK=41.5/64/83MHz
1H
LVAL
DVAL
DATA
3
2
1
OUT
6
5
4
9
8
7
・・・・・・
b
・・・・・・
2442
2441
2440
2445
2444
2443
c
a
1CLK=41.5MHz
Model
unit: CLK
CameraLink Tap
BC302LMG
a
2tap
1024
4
8
3tap
816
unit: CLK
a
1tap
b
2tap
any
1tap
1024
8
4
2tap
3tap
BC505LMG
BC505LMC
683
2448
1224
any
816
Horizontal sync frequency=1H
BC302LMG
c
2048
4
3tap
Model
2448
1224
CameraLink Tap
BC505LMG
BC505LMC
683
2tap
1CLK=64MHz / 83MHz
BC302LMG
c
2048
1tap
BC505LMG
BC505LMC
b
1tap
3tap
Model
2448
2447
2446
unit:KHz
CameraLink Tap
Clk frequency (1CLK)
41.5MHz
64MHz
83MHz
1tap
20.15
31.20
40.30
2tap
40.07
62.04
80.14
3tap
59.73
any
any
1tap
16.87
26.13
33.75
2tap
33.59
52.01
67.17
3tap
50.14
any
any
25 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
(2) Vertical timing
● All pixel readout (* following timing figure: BC505LMG 3tap)
Vertical sync frequency=1V
Model
BC302LMG
BC505LMG
BC505LMC
unit:Hz
CameraLink Tap
Clk frequency (1CLK)
41.5MHz
64MHz
83MHz
1tap
13.00
20.00
26.00
2tap
26.00
40.33
52.00
3tap
39.00
56.13
56.13
1tap
8.15
12.54
16.31
2tap
16.31
25.30
32.63
3tap
24.47
36.00
36.00
26 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Typical Spectral Response
* The lens characteristics and light source characteristics is not reflected in table.
< BC302LMG / BC505LMG >
< BC505LMCG >
< BC505LMCF >
27 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Operating Ambient Conditions
● Ambient conditions
< BC302LMG / BC505LMG>
- Operating Assurance
Temperature:
-5°C ~ 45°C,
Humidity:
10% ~ 90% (no condensation)
- Storage Assurance
Temperature:
-20°C ~ 60°C
Humidity:
90% or less (no condensation)
< BC505LMCG / BC505LMCF>
- Operating Assurance
Temperature:
-5°C ~ 45°C,
Camera housing temperature is less than 65 °C.
Humidity:
10% ~ 90% (no condensation)
- Storage Assurance
Temperature:
-20°C ~ 60°C
Humidity:
90% or less (no condensation)
● EMC Conditions
- EMI (Electro-Magnetic Interference):
EN61000-6-4
FCC Part 15 Subpart B Class A
KN32
- EMS (Electro-Magnetic Susceptibility):
EN61000-6-2
KN35
28 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Command Commnucation Protocol
BC series has Legacy protocol and GenCP as command communication protocol.
The switching of communication protocol is recognized automatically from received packet. The PC application
can communication to camera without switching operation of communication protocol. For Legacy protocol and
GenCP, BC series has multiple register for control of camera feature.
The accessing to IIDC2 registers is possible by using Legacy protocol and GenCP. The accessing to Legacy
registers is possible by using only Legacy protocol. The accessing to GenCP registers is possible by using
only GenCP.
29 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Legacy Protocol
This command communication protocol is the teli standard method (method in which parameters are set in the
registers in the camera). In command send/receive operation, hexadecimal address and data are converted to
ASCII data. All ASCII alphabetic characters used are uppercase characters.
(1) Writing to the register
To write data in a register, send a command, as follows.
(Address' max-length is 8 bytes, and Data's max-length is 8 bytes)
Address
Address
‘ , ’
Data
Data
Data
Data
Data
Data
Data
Data
2nd byte 1st byte (0x2C) 8th byte 7th byte 6th byte 5th byte 4th byte 3rd byte 2nd byte 1st byte
[CR]
(0x0D)
For example, to write data 0x38 to address 0x76, send a command, as follows:
‘7’
(0x37)
‘6’
(0x36)
‘ , ’
(0x2C)
‘3’
(0x33)
‘8’
(0x38)
[CR]
(0x0D)
The camera responds to the write command with No Error (ACK) or Error (NAK), as follows:
No Error (ACK):
[ACK]
(0x06)
[CR]
(0x0D)
Error (NAK):
[NAK]
(0x15)
[CR]
(0x0D)
(2) Reading the register
To read data from a register, send ', (comma)', 'R', 'Q' and [CR] code following the address. For example, to
read data in address 0x91, send a command, as follows:
‘9’
(0x39)
‘1’
(0x31)
‘ , ’
(0x2C)
‘R’
(0x52)
‘Q’
(0x51)
[CR]
(0x0D)
The camera responds to the read request, as follows (Data's max-length is 8 bytes):
Data
Data
Data
Data
Data
Data
Data
Data
8th byte 7th byte 6th byte 5th byte 4th byte 3rd byte 2nd byte 1st byte
[CR]
(0x0D)
Actually, the camera responds to the read request as minimum data length: For example, to read data 0x10 to
address 0x91, the camera responds as follows:
‘1’
(0x31)
‘0’
(0x30)
30 / 69
[CR]
(0x0D)
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
GenCP
The communication to camera is archived by using the communication packet specificated GenCP. Please
see GenCP specifications.
The following figure shows the packet structure:
● READMEM_CMD
+0x0
+0x1
+0x2
+0x3
0x00
0x0100 (preamble)
0x04
SCD checksum
0x0000 (channel_id)
0x08
0x4000 (flags)
0x0800 (command_id)
0x0C
0x000C (length)
request_id
register address (hi)
0x10
register address (lo)
0x14
0x18
CCD checksum
0x0000 (reserved)
read length
● READMEM_ACK
+0x0
+0x1
+0x2
+0x3
0x00
0x0100 (preamble)
CCD checksum
0x04
SCD checksum
0x0000 (channel_id)
0x08
status code
0x0801 (command_id)
0x0C
length
request_id
0x10
data
...
(0x10+length-4)
31 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● WRITEMEM_CMD
+0x0
+0x1
+0x2
+0x3
0x00
0x0100 (preamble)
CCD checksum
0x04
SCD checksum
0x0000 (channel_id)
0x08
0x4000 (flags)
0x0802 (command_id)
0x0C
length
request_id
0x10
register address (hi)
0x14
register address (lo)
0x18
data
...
(0x10+length-4)
● WRITEMEM_ACK
+0x0
+0x1
+0x2
+0x3
0x00
0x0100 (preamble)
0x04
SCD checksum
0x0000 (channel_id)
0x08
status code
0x0803 (command_id)
0x0C
0x0004 (length)
request_id
0x10
0x0000 (reserved)
length written
32 / 69
CCD checksum
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Register Map
IIDC2 Address
The following address is possible to control by Legacy protocol and GenCP.
Register
Read
AC
Memory
address
Write
(*)
Save
0x0020 005C
R
-
0x0020 105C
R/W
0x0020 107C
0x0020 2094
Color
Default
Register name
Description
-
-
0x0
ApplyImageFormat
0x0:No error, 0x10:Scalable setting error
○
-
-
0x2
CameraLink Tap
0x1:1tap、0x2:2Tap、0x3:3Tap
R/W
○
-
-
0x53
CameraLink CLK
0x29:41.5178MHz、0x40:64.2826MHz、0x53:83.0357MHz
R/W
○
○
-
0x0
offsetX
Scalable: Horizontal offset (in pixels) from the origin to the region of interest.
3M:0x0 (0) ~ 0x7C0 (1984) OffsetX setting unit: 4
5M/5MC:0x0 (0) ~ 0x950 (2384)
0x0020 2098
R/W
○
○
-
3M:0x800
5M/5MC:0x990
OffsetX setting unit: 4
Scalable: Width
3M:0x40 (64) ~ 0x800 (2048) Width setting unit: 4
Width
5M/5MC:0x40 (64) ~ 0x990 (2448)
Width setting unit: 4
Scalable: Vertical offset (in pixels) from the origin to the region of interest.
0x0020 209C
R/W
○
○
-
0x0
3M:0x0 (0) ~ 0x5C0 (1472)
offsetY
OffsetY setting unit: 2
5M/5MC:0x0 (0) ~ 0x7C0 (1984)
0x0020 20A0
0x0020 303C
R/W
R/W
0x0020 30A8
R/W
0x0020 30BC
R/W
0x0020 30C8
R/W
○
-
-
○
-
○
-
-
○
-
-
-
-
○
-
3M:0x600
5M/5MC:0x800
OffsetY setting unit: 2
Scalable: Height
3M:0x40 (64) ~ 0x600 (1536)
Height
Height setting unit: 2
5M/5MC:0x40 (64) ~ 0x800 (2048)
Height setting unit:
0x0: Abort image output.
Command
0x8: Start image output.
Acquisition
0x0:NoSpecify
Take priority ExposureTime setting.
FrameRateControl
0x1:Manual
Take priority AcquisitionFrameRate setting.
3M:0x340000
Acquisition
Framerate
5M/5MC:0x20A0A0
FrameRate
*AcquisitionFrameRate / 65536[fps]
Aqcuisition
0x0:NoSpecify
Take priority ExposureTime setting.
FrameIntervalControl
0x1:Manual
Take priority AcquisitionFrameInterval setting.
Acquisition
Interval
FrameInterval
式: AcquisitionFrameInterval / 37500000[sec]
ExposureTimeControl
0x1:Manual、0x2:Auto
0x8
0x0
0x0
3M:0xB0101
0x1: Stop image output.
0x0020 30DC
R/W
-
-
-
0x0020 4028
R/W
-
○
○
0x0020 403C
R/W
○
○
-
0x0020 405C
R/W
○
○
-
0x0
BlackLevel
0xFFFFFFEFF (-25%) ~ 0x100(+25%)
0x0020 4068
R/W
-
○
○
0x1
GainControl
0x1:Manual、0x2:Auto
0x0020 407C
R/W
○
○
-
0x0
Gain
0x0 (0dB) ~ 0xF0 (24dB)
0x0020 409C
R/W
○
○
-
0x64
Gamma
Min:0x2d(γ=0.45) Max:0x64(γ=1.0)
0x0020 40BC
R/W
○
○
-
0x0
Sharpness
Min:0(OFF) Max:7(Max) (Only B/W models)
0x0020 5068
R/W
-
○
○
0x1
WhiteBalanceControl
0x1:Manual、0x2:Auto、0x3:OnePush
0x0020 507C
R/W
-
○
○
0x10000
WhiteBalanceR
0x10000 (1 times) ~ 0x7FFFF (8 times)
0x0020 509C
R/W
-
○
○
0x10000
WhiteBalanceB
0x10000 (1 times) ~ 0x7FFFF (8 times)
0x0020 603C
R/W
○
○
-
LUT Enable
0x0:OFF、0x1:ON
5M/5MC:0x11899B
0x1
3M:0xA4CB8
5M/5MC:0x112A88
0x0
0x0030 0000
Exposure Time
ExposureTime
*ExposureTime / 37500000 [sec]
0x465 (30usec) ~ 0x23C34600 (16sec)
LUTValue[0]
0x0030 0004
↓
2
Acquisition
LUTValue[1]
R/W
○
-
-
0x0
↓
0x0030 3FF8
LUTValue[4094]
0x0030 3FFC
LUTValue[4095]
33 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
Min:0x0、MAX:0xFFF
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Register
Read
AC
Memory
address
Write
(*)
Save
0x0020 703C
R/W
○
0x0020 705C
R/W
0x0020 707C
R/W
Color
Default
Register name
Description
○
ー
0x0
TriggerMode
0x0:Normal shutter mode 0x1:Random trigger Shutter mode
○
○
ー
0x0
TriggerSequence
0x0:Fix mode, 0x1:Level mode, 0x6:Bulk mode
○
○
ー
0x0
TriggerSource
Selects a trigger source of random trigger shutter.
0x0:Line0(CC1)、0x5:Line5(I/O connector 4pin)
0x6:Line6(I/O connector 5pin)、0x40:Software
0x0020 709C
R/W
○
○
ー
0x0
Trigger AdditionalParameter
0x0020 70BC
R/W
○
○
ー
0x0
TriggerDelay
Sets the number of frames to exposure in Bulk mode.
0x0 (0) ~0xFF (255)
Sets the delay from trigger detection to exposure start.
式: TriggerDelay / 37500000 [sec]
0x0(0sec) ~ 0x47868C0(2sec)
0x0020 70DC
W
ー
ー
ー
ー
SoftwareTrigger
0x8:Execute SoftwareTrigger
0x0020 213C
R/W
○
○
ー
0x1
Binning Horizontal
Min:1、Max:2
0x0020 215C
R/W
○
○
○
0x1
Binning Vertical
Min:1、Max:2
0x0020_217C
R/W
○
○
○
0x1
Decimation Horizontal
Min:1、Max:2
0x0020_219C
R/W
○
○
○
0x1
Decimation Veritical
Min:1、Max:2
0x0020 20DC
R
-
○
ー
0x69
PixelCoding
0x0020 20FC
R/W
-
○
0x08
PixelSize
0x0020 40DC
R/W
-
○
0x0
ALCExposureValue
3M/5M:0x0:Mono
5MC:0x60:BayerGR、0x63:BayerRG、
0x66:BayerGB、0x69:BayerBG
ー
0x8:Bpp8、0xA:Bpp10、0xC:Bpp12
Sets a correction value for a convergence value.
○
convergence value =84×2^(ALCExposureValue/10)
Min:0xFFFFFFEC、Max:0xF
Sets minimum value of ExposureTime in ALC.
0x0020_429C
R/W
-
○
○
0x465
ALCExposureTimeMin
*ALCExposureTimeMin / 37500000 [sec]
0x465 (30usec) ~ 0x23C34600 (16sec)
Sets maximum value of ExposureTime in ALC.
0x0020_42BC
R/W
-
○
○
0x23c3460
ALCExposureTimeMax
*ALCExposureTimeMin / 37500000 [sec]
0x465 (30usec) ~ 0x23C34600 (16sec)
0x0020_42DC
R/W
-
○
○
0x0
ALCGainMin
0x0020_42FC
R/W
-
○
○
0xF0
ALCGainMax
0x0021_F37C
R/W
-
○
○
0x64
0x0020 807C
R/W
-
-
-
0x0
UserSetSelector
-
-
0x0
UserSetCommand
○
-
0x1
UserSetDefault
Sets minimum value of Gain in ALC.
0x0 (0dB) ~ 0xF0 (24dB)
Sets maximum value of Gain in ALC.
0x0 (0dB) ~ 0xF0 (24dB)
ALCPhotometric
Sets photometric area size for measuring luminance
AreaSize
0x1 (1%) ~ 0x64 (100%)
Sets the memory channel of UserSet.
0x0:Default、0x1:UserSet1 ~ 0xF:UserSet15
Done: ○
Load: ○
0x0020 809C
R/W
Save:
-
Read / Write the UserSet.
0x0:Done,
0x08:Load,
0x09:Save,
0x7F:Erase
Erase:
-
Selects a channel of user setting when camera powers up.
0x0021 F2FC
R/W
-
0x0:Default
0x01:UserSet1 ~ 0x15:UserSet15
34 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Register
Read
AC
Memory
address
Write
(*)
Save
0x0020 90BC
R/W
-
○
Color
Default
-
0x4
Register name
Description
Selects the Line of I/O connector.
LineSelector
0x4:Line4(I/O connector 1pin)
0x6:Line6(I/O connector 5pin)
Selects the source of the output signal.
0x0:OFF
0x20:UserOutput
0x40:Timer0Active
0x0020 90DC
R/W
-
○
-
0x0
LineSource
0x63:AcquisitionActive
0x6A:FrameTriggerWait
0x6B:FrameActive
0x73:FrameTransferActive
0x7B:ExposureActive
Selects the Input / Output of each Line.
[0bit~3bit 目]: fixed ”0”
0x0020 9030
R/W
ー
○
-
0x10
LineModeAll
[4bit 目]: fixed ”1”
[5bit 目]: fixed ”0”
[6bit 目]:”0”input, ”1”output
⇒ correspond to Line6(I/O connector 5pin)
Selects the inversion of I/O lines.
”0”negative, "1" positive
[0bit]: correspond to Line0(CC1)
0x0020 9050
R/W
-
○
ー
0x0
LineInverterAll
[1bit~3bit]: fixed ”0”
[4bit]: correspond to Line4(I/O connecotor 1pin)
[5bit]: correspond to Line5(I/O connecotor 4pin)
[6bit]: correspond to Line6(I/O connecotor 5pin)
Returns the current status of all I/O lines.
[0bit]: correspond to Line0(CC1)
0x0020 9070
R
-
ー
ー
0x7F
LineStatusAll
[1bit~3bit]: fixed ”0”
[4bit]: correspond to Line4(I/O connecotor 1pin)
[5bit]: correspond to Line5(I/O connecotor 4pin)
[6bit]: correspond to Line6(I/O connecotor 5pin)
Sets the user output value of each Line.
0x0020 9090
R/W
-
○
ー
0x0
UserOutputValueAll
[4bit 目]: correspond to Line4(I/O connecotor 1pin)
[6bit 目]: correspond to Line6(I/O connecotor 5pin)
Selects the source of Timer0Active pulse to start.
0x0021 F27C
R/W
ー
○
-
0x7C
TimerTriggerSource
0x0:OFF
Timer disabled.
0x20:Line
Start timer from Line0(CC1) or
Line5 (I/O connector 4pin) input.
0x68:FrameTrigger
Start timer from trigger input.
0x7C:ExposureStart
Start timer from exposure start.
0x0020 A05C
R/W
ー
○
-
0x0
TimerDelay
Min:0x0 Max:0x47868A0(2sec)
0x0020 A07C
R/W
ー
○
-
0x0
TimerDuration
Min:0x0 Max:0x47868A0(2sec)
0x0020 21B0
R/W
○
○
-
0x0
ReverseX
0x0020 21D0
R/W
○
○
-
0x0
ReverseY
Sets the Reverse Horizontal.
0x0:OFF, 0x1:ON
Sets the Reverse Vertical.
0x0:OFF, 0x1:ON
0x0:OFF
0x1:Black
0x2:White
0x3:GreyA
0x0021 F13C
R/W
-
○
-
0x0
TestPattern
0x4:GreyB
0x5:GreyHorzontalRamp
0x6:GreyScale(B/W model only)
0x7:ColorBar(Color model only)
0x8:GreyVerticalRamp
35 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Register
Read
AC
Memory
address
Write
(*)
save
Color
Default
Register name
0x0021 F29C
0x0
DPCEnable
0x0021 F2BC
0x0
DPCNumber
Description
Sets the activation of DPC (Defective pixel correction) function.
0x0:OFF, 0x1:ON
Sets the number of pixels to correct.
0x0 (0) ~ 0x100 (256)
Sets the X coordinate of defective pixel (1st)
0x0040 0000
DPCValue [X1]
3M:0x0(0)~0X7FF(2047)
5M/5MC:0x0(0)~0X98F(2447)
Sets the Y coordinate of defective pixel (1st)
0x0040 0004
DPCValue [Y1]
3M:0x0(0)~0X5FF(1535)
5M/5MC:0x0(0)~0X7FF(2047)
Sets the X coordinate of defective pixel (2nd)
0x0040 0008
R/W
-
○
DPCValue [X2]
-
3M:0x0(0)~0X7FF(2047)
5M/5MC:0x0(0)~0X98F(2447)
0x0
0x0040 000C
Sets the Y coordinate of defective pixel (2nd)
DPCValue [Y2]
3M:0x0(0)~0X5FF(1535)
5M/5MC:0x0(0)~0X7FF(2047)
↓
↓
↓
Sets the X coordinate of defective pixel (255th)
0x0040 07F8
DPCValue [X255]
3M:0x0(0)~0X7FF(2047)
5M/5MC:0x0(0)~0X98F(2447)
Sets the Y coordinate of defective pixel (255th)
0x0040 07FC
DPCValue [Y255]
3M:0x0(0)~0X5FF(1535)
5M/5MC:0x0(0)~0X7FF(2047)
0x0021 F31C
R/W
-
○
-
0x0021 F33C
R/W
-
○
-
0x0
SS Enable
0x1
SS TerminateAt
0x0050 0040
SS Entry 0
0x0050 0044
SS Entry 1
0x0050 0048
SS Entry 2
R/W
-
○
0x0050 004C
↓
0x0050 0078
-
0x1
SS Entry 3
Sets the activation of Sequential Shutter (SS) function.
0x0:OFF、0x1:ON
Sets the number of Tables to repeat the sequence.
Min:0x1、Max:0x10
Sets the UserSet number to register to the first sequence.
Min:0x1、Max:0xF
↓
SS Entry 15
*3M:BC302LMG、5M:BC505LMG、5MC:BC505LMC
*If [Color] marked “〇”, the feature is supported only color model.
*AC: In relation to Acquisition Command (address:0x002 0303C) : If [AC] marked “〇”, the register is set to following procedure.
Stop image output (0x00) → register setting / write command → Start image output (0x08)
36 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
GenCP Address
The following address is possible to access by GenCP only.
Register
address
Read
Write
Memory
save
Default
0x0000 0000
R.O.
-
-
GenCP Version
0x0001 0000(GenCP Ver.1.0 を示す)
R.O.
-
-
Manufacture Name
Toshiba-Teli
R.O
-
-
Model Name
ex.)BC505LMG
R.O
-
-
Family Name
BC-Series
R.O
-
-
Device Version
Cameara version
R.O
-
-
Manufacture Info
ex) 5.0M 2/3 B/W
R.O
-
-
Serial Number
ex) 0100001
R/W
〇
Null string
User Define Name
User-programmable device identifier.
R.O
-
0x00
Timestamp
Returns the latched 64-bit value of the timestamp counter.
0x0000 01F8
W.O.
-
-
0x0001 0000
R.O
-
0x91
Supported Baudrates
0x0001 0004
R/W
-
0x00
Current Baudrate
Register name
Description
0x0000 0004
|
0x0000 0043
0x0000 0044
|
0x0000 0083
0x0000 0084
|
0x0000 00C3
0x0000 00C4
|
ex) 3.3.8
0x0000 0103
0x0000 0104
|
0x0000 0143
0x0000 0144
|
0x0000 0183
0x0000 0184
|
0x0000 0193
0x0000 01F0
|
0x0000 01F7
Timestamp Latch
0x01: Latches the current timestamp counter into timestamp
register.
9600/115200/921600 bps
Set baudrate.
0x00:auto recognition, 0x01:9600bps, 0x10:115200bps,
0x80:921600bps
*3M:BC302LMG、5M:BC505LMG / BC505LMC
37 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Legacy Address
The following address is possible to access by Legacy protocol only.
Register
address
0x00
|
0x0F
0x10
|
0x1F
0x20
|
0x2F
0x30
|
0x3F
0x48
|
0x4F
0x60
|
0x67
Read
Write
Memory
save
Default
R.O.
-
-
Manufacture Name
(ASCII)
Toshiba-Teli
R.O.
-
-
Model Name
(ASCII)
Ex.)BC505LMG
R.O.
-
-
Family Name
(ASCII)
BC-Series
R.O.
-
-
Serial Number
(ASCII)
Ex.)0100001
R.O.
-
-
Camera version
(ASCII)
Ex.)3.3.8
R.O.
-
-
Register map version
(ASCII)
Ex.)01.01
Register name
Description
0x69
R.O.
-
-
Status
Status after control camera feature.
0x6A
R.O.
-
-
Expanded status
Expanded status after control camera feature.
0x6C
R/W
-
-
Memory bank
Sets the memory channel of UserSet.
0x0:Default、0x1:UserSet1 ~ 0xF:UserSet15
0x6D
W.O.
-
-
Memory save
0x01: Save user settings.
0x6E
W.O.
-
-
Memory load
0x01: Load user settings from selected memory bank.
0x70
R/W
〇
0x00
Setup
0xFFFFFFEFF (-25%) ~ 0x100(+25%)
0x76
R/W
〇
0x00
Gain
0x00(0dB:default)~0xF0(24dB)
0x80
R.O.
-
3M:0x34
5M:0x20
Frame rate
0x82
R.O.
-
3M:0x800
5M:0x990
Horizontal resolution
0x84
R.O.
-
3M:0x600
5M:0x800
Vertical resolution
0x87
R/W
〇
0x08
Output bit
0x8:8bit, 0xA:10bit,0xC:12bit
0x88
R/W
〇
0x00
Test pattern
0x0:Off,0x1:Black, 0x2:White, 0x3:GreyA, 0x4:GreyB,
0x5:GreyHorzontalRamp, 0x6:GreyScale,
0x7: Colorbar, 0x8:GreyVerticalRamp
All pixels readout:
Calcurated from [CameralinkCLK / Cameralink Tap].
Scalable:
Calcurated from number of ouput lines.
All pixels readout:
3M:0x800 (2048), 5M:0x990 (2448)
Scalable:
3M:0x40 (64)~0x800 (2048), 5M:0x40 (64)~0x990 (2448)
All pixels readout:
3M:0x600 (1536), 5M:0x800 (2048)
Scalable:
3M:0x40 (64)~0x600 (1536), 5M:0x40 (64)~0x800 (2448)
0x89
R/W
〇
0x01
Defective pixel correction
0x0:OFF, 0x01:ON
0x8A
R/W
〇
0x00
ReverseX
0x0:OFF、0x01:ON
0x8B
R/W
〇
0x00
ReverseY
0x0:OFF、0x01:ON
0x90
R/W
〇
0x00
Scan mode
0x0:normal (default)、0x1:Scalable
0x91
R/W
〇
0x00
Shutter mode
0x0:Normal shutter(default)、0x1:Random trigger shutter
0x92
R/W
〇
0x00
Random trigger mode
0x93
R/W
〇
0x00
Trigger polarity
0x94
R/W
〇
0x00
Frame number in Bulk mode
Sets number of output frame in bulk mode.
0x00~0xFF
0xA0
R/W
〇
3M:0x34
5M:0x20
Shutter speed denominator
0x01(1)~0x8235(33333)
0xA4
R/W
〇
0x01
Shutter speed numerator
0x01(1)~0x10(16)
38 / 69
0x0:FIX mode (default)、0x1:pulse width mode
0x6:bulk mode
0x0:negative(default)、0x1:positive
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Register
Address
Read
Write
Memory
save
Default
0xC0
W.O.
ー
-
0xC4
R/W
〇
0x0
0xC8
R/W
〇
3M:0x600
5M:0x800
0xCC
R/W
〇
0x0
0xD0
R/W
〇
3M:0x800
5M:0x990
0xD8
R/W
-
0x00
0xDA
R/W
-
-
User area : data
0xDB
W.O.
-
-
User area : erase
0x01: erase all data in User area.
0xDC
R/W
-
0x10
User area : byte number
Sets the byte number of R/W length of user area.
0x01, 0x04, 0x08, 0x10(16)
0xF0
R/W
-
0x00
SequentialShutter Enable
0x0:OFF、0x01:ON
Sets the number of Tables to repeat the sequence.
0x01 ~ 0x04
Register name
Description
Update scalable
0x01: Update registers related to scalable.
3M:0x0 (0)~0x5C0 (1472) OffsetY setting unit 2
5M:0x0 (0)~0x7C0 (1984) OffsetY setting unit 2
3M:0x40 (64)~0x600 (1536) Height setting unit 2
5M:0x40 (64)~0x800 (2048) Height setting unit 2
3M:0x0 (0)~0x7C0 (1984) OffsetX setting unit 4
5M:0x0 (0)~0x950 (2384) OffsetX setting unit 4
3M:0x40 (64)~0x800 (2048) Width setting unit 4
5M:0x40 (64)~0x990 (2448) Width setting unit 4
Sets address of user area
0x0~0x0F(15)
Read /Write data to the specified by [User area : address].
The data length is specified by [User area : byte number].
Offset Y
Height
Offset X
Width
User area : address
0xF1
R/W
-
0x01
SequentialShutter
TerminateAt
0xF3
R/W
-
0x01
SequentialShutter Entry1
Sets the UserSet number to register to the first sequence.
0x01 ~ 0x04
0xF4
R/W
-
0x01
SequentialShutter Entry2
Sets the UserSet number to register to the 2nd sequence.
0x01 ~ 0x04
0xF5
R/W
-
0x01
SequentialShutter Entry3
Sets the UserSet number to register to the 3rd sequence.
0x01 ~ 0x04
0xF6
R/W
-
0x01
SequentialShutter Entry4
0xF7
W.O.
-
-
SequenceMemory Load
0xF8
W.O.
-
-
SequenceMemory Save
Sets the UserSet number to register to the 4th sequence.
0x01 ~ 0x04
0x1: Load the parameters from the memory specified [Memory
bank] register.
0x01: Save the parameters from the memory specified [Memory
bank] register.
If camera teruned off, the data in memory for SS is erased.
※3M:BC302LMG、5M:BC505LMG/ BC505LMC
R/W
Read / Write
R.O.
Read only
W.O.
Write only
N.A.
Not Accessible
39 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Functions
This section introduces standard functions. BC series provide following functions.
Category
TransportLayerControl
Function
CameraLink Tap
CameraLink tap control
CameraLink CLK
CameraLink clk control
Baudrate
Baudrate control
DeviceControl
DeviceControl
Device information
ImageFormatControl
Scalable
Scalable control
Binning
Binning control
Decimation
Decimation control
Reverse
Image flip
PixelFormat
Pixel format selection
TestPattern
Test pattern control
AcquisitionControl
Image stream start / stop
TriggerControl
Trigger control
ExposureTimeControl
Exposure time control
DigitalIOControl
DigitalIOControl
GPIO signal control
CounterAndTimerControl
TimerControl
Timer0Active signal control
AnalogControl
Gain
Gain control
BlackLevel
Black level control
Gamma
Gamma correction
Sharpness
Sharpness control
BalanceRatio
White balance control
ALCControl
ALCControl
ALC control
LUTControl
LUTControl
LUT control
SequentialShutterControl
SequentialShutterControl
Sequential shutter control
DPCControl
DPCControl
Defect pixel correction control
UserSetControl
UserSetControl
Load / Save user setting
AcquisitionControl
40 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Features supported by each model are as follows.
BC302LMG
BC505LMG
BC505LMC
TransportLayerControl
Function
○
○
○
DeviceControl
○
○
○
Scalable
○
○
○
Binning
○
○
○
Decimation
○
○
○
Reverse
○
○
○
PixelFormat
○
○
○
TestPattern
○
○
○
AcquisitionControl
○
○
○
TriggerControl
○
○
○
ExposureTimeControl
○
○
○
DigitalIOControl
○
○
○
TimerControl
○
○
○
Gain
○
○
○
BlackLevel
○
○
○
Gamma
○
○
○
Sharpness
○
○
-
BalanceRatio
-
-
○
ALCControl
○
○
○
ALCExposureMin
-
-
○
ALCExposureMax
-
-
○
ALCGainMin
-
-
○
ALCGainMax
-
-
○
LUTControl
○
○
○
SequentialShutterControl
○
○
○
DPCControl
○
○
○
UserSetControl
○
○
○
41 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
TransportLayerControl
Registers of this category provides the function related to control the number of taps and clk frequency of
CameraLink interface.
● IIDC2 Register
Register
Address
Read Memory
Write
Save
Default
Register name
Description
0x0020 105C
R/W
〇
0x2
CameraLink Tap
0x1:1Tap、0x2:2Tap、0x3:3Tap
0x0020 107C
R/W
〇
0x53
CameraLink CLK
0x29:41.5178MHz、0x40:64.2826MHz、0x53:83.0357MHz
● Note
Before write to CameraLink Tap (0x0020 205C) or CameraLink CLK (0x0020 107C), stop image output
(Write to 0x00 to AcquistionCommand (0x0020 303C)). After change setting of CameraLink Tap /
CameraLink CLK, restart image output (Write to 0x08 to AcquistionCommand (0x0020 303C)).
42 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
DeviceControl
Registers of this category provide various information of the camera.
The address is different by using of communication protocol.
● Registers
GenCP
Register
Address
Read Memory Default
Write
Save
0x0000 0004
|
-
-
Manufacture Name
(ASCII)
Toshiba-Teli
R.O
-
-
Model Name
(ASCII)
ex) BC505LMG
R.O
-
-
Family Name
(ASCII)
BC-Series
R.O
-
-
Device Version
(ASCII)
Camera version ex)3.3.8
R.O
-
-
Manufacture Info
(ASCII)
ex) 5.0M 2.3 B/W
R.O
-
-
Serial Number
(ASCII)
ex) 0100001
R/W
〇
Null
string
User Define Name
User-programmable device identifier.
0x0000 0044
0x0000 0083
0x0000 0084
|
0x0000 00C3
0x0000 00C4
|
0x0000 0103
0x0000 0104
|
0x0000 0143
0x0000 0144
|
0x0000 0183
0x0000 0184
|
0x0000 0193
Description
R.O.
0x0000 0043
|
Register name
43 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Legacy protocol
Register
Address
Read Memory Default
Write Save
0x00
Register name
Description
R.O.
-
-
Manufacture Name
(ASCII)
Toshiba-Teli
R.O.
-
-
Model Name
(ASCII)
Ex.) BC505LMG
R.O.
-
-
Family Name
(ASCII)
BC-Series
R.O.
-
-
Serial Number
(ASCII)
Ex.) 0100001
R.O.
-
-
Camera version
(ASCII)
Ex.) 3.3.8
R.O.
-
-
Register map version
(ASCII)
Ex.) 01.01
0xD8
R/W
-
0x00
0xDA
R/W
-
-
User area : data
0xDB
W.O.
-
-
User area : erase
0x01: erase all data in User area.
0xDC
R/W
-
0x10
User area : byte number
Sets the byte number of R/W length of user area.
0x01, 0x04, 0x08, 0x10(16)
|
0x0F
0x10
|
0x1F
0x20
|
0x2F
0x30
|
0x3F
0x48
|
0x4F
0x60
|
0x67
Sets address of user area
0x0~0x0F(15)
Read /Write data to the specified by [User area : address].
The data length is specified by [User area : byte number].
User area : address
44 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Scalable
Scalable function reads out the region of interest (ROI) of the sensor.
If height size is set small, it is possible to increase the frame rate.
Only single rectangle is selectable. Concave or convex shape is not selectable.
- Window size:
{A + 4 × m (H)} × {B + 2 × n (V)}
A, B = minimum unit size
m, n = integer
The window size is equal or less than maximum image size.
- Start address:
{4 x i (H)} x {2 x j (V)}
i, j = integer
The window size is equal or less than maximum image size.
Model Name
BC302LMG
BC505LMG
BC505LMC
Width/OffsetX setting unit
4
4
4
Height/OffsetY setting unit
2
2
2
Minimum unit size (H)×(V)
64×64
64×64
64×64
Maximum unit size (H)×(V)
2048×1536
2448×2048
2448×2048
( X , Y )=( 4 * i , 2 * j )
A+4*m
B+2*n
⇒
Scalable
45 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Binning
In the binning mode, a pixel is added with the neighboring pixel(s).
This increases the sensitivity of the image. It’s alike scalable, the frame rate can be faster and interface
bandwidth occupation decrease.
2448
2048
All pixel readout
1224
1024
Binning
Binning operation (e.g. 5M pixel, 2x2 binning)
● Note
Before write to Binning Horizontal (0x0020 213C) or Binning Vertical (0x0020 215C), stop image output
(Write to 0x00 to AcquistionCommand (0x0020 303C)). After change setting of Binning Horizontal /
Binning Vertical, restart image output (Write to 0x08 to AcquistionCommand (0x0020 303C)).
46 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Decimation
Decimation feature reads out all effective areas at high speed by skipping pixels and lines.
Decimation feature can make frame rate faster, and decrease interface bandwidth occupation.
2448
2048
All pixel readout
1224
1024
Decimation
Decimation operation (e.g. 5M pixel, 2x2 decimation)
● Note
Before write to Decimation Horizontal (0x0020 217C) or Decimation Vertical (0x0020 219C), stop
image output (Write to 0x00 to AcquistionCommand (0x0020 303C)). After change setting of
Decimation Horizontal / Decimation Vertical, restart image output (Write to 0x08 to
AcquistionCommand (0x0020 303C)).
47 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Reverse
Reverse function flips image in horizontal and/or vertical direction.
ReverseX
ReverseY
ReverseX+ReverseY
● Note
Control by IIDC2 address
Before write to Decimation Horizontal (0x0020 217C) or Decimation Vertical (0x0020 219C), stop
image output (Write to 0x00 to AcquistionCommand (0x0020 303C)). After change setting of
Decimation Horizontal / Decimation Vertical, restart image output (Write to 0x08 to
AcquistionCommand (0x0020 303C)).
Control by Legacy address
The change is applied immedietely by write to ReverseX register (0x8A) or ReverseY register (0x8B).
48 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
PixelFormat
Select a pixel format of image stream data.
● Note
Control by IIDC2 address
Before write to PixelSize (0x0020 20FC), stop image output (Write to 0x00 to AcquistionCommand
(0x0020 303C)). After change setting of PixelSize, restart image output (Write to 0x08 to
AcquistionCommand (0x0020 303C)).
Control by Legacy address
The change is applied immedietely by write to Output bit register (0x87).
49 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
TestPattern
Camera supports test pattern data output. Following test patterns are available;
Black
White
GreyA
GreyB
GreyHorizontalRamp
GreyVerticalRamp
GreyScale
ColorBar
(B/W model only)
(Color model only)
50 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
AcquisitionControl
AcquisitionControl features are related to image acquisition.
Acquisition frame rate is variable. Maximum acquisition frame rate depends on camera operation mode.
(scalable, CameraLink Tap, CameraLink CLK, etc.)
TriggerControl
TriggerControl features are related to image acquisition using trigger.
This camera series provides two kinds of exposure synchronization.
1. Normal Shutter mode
: Free run operation (internal synchronization)
2. Random Trigger Shutter mode
: Synchronized with external trigger input
In Random Trigger Shutter mode, two kinds of trigger input are available.
1. Trigger signal via the CC1
2. Trigger signal via the I/O connector
The following table shows the combination of operation mode of this camera series.
Operation Mode
Trigger Mode
Synchronization
Normal Shutter mode
Free run
Exposure Control
‘ExposureTime’ register control
-Edge mode:TriggerSequence0
-Bulk mode:TriggerSequence6
Random Trigger Shutter mode
‘ExposureTime’ register control
HardwareTrigger
-Level mode:TriggerSequence1
Trigger pulse width control
* The camera operation not mentioned above is not supported.
51 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
- Edge mode (TriggerSequence0)
The exposure time is determined by Exposure Time setting.
TRIG
Exposure
FVAL
LVAL
DVAL
DATA OUT
※1
※2
※3
*1 = 40.4μs
*2 = Setting of shutter speed
*3 = 424.6μs
- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
TRIG
Exposure
FVAL
LVAL
DVAL
※4
DATA OUT
※1
※2
※3
*1= 40.4μs
*2= Setting of shutter speed
*3= 424.6μs
*4= 54.2μs
52 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
- Bulk mode (TriggerSequence6)
Camera exposes and transfers multiple frames by a single trigger.
TRIG
ExposureTime
TriggerAdditionalParameter = 3
Exposure
DATA OUT
Image
Image
Image
Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change
by register setting. And you can add delay time from trigger edge to exposure start by register setting.
Trigger
TriggerDelay
Exposure
Image Streaming
on Interface Bus
Image
53 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
ExposureTimeControl
ExposureTime controls the duration where the image sensor is exposed to light.
This camera series provides two kinds of exposure time control mode.
- Manual
: The exposure time is determined by ‘ExposureTime’ register setting value.
- Auto
: The exposure time is adjusted automatically.
● Note
・Setting of Exposure control
Set to ExposureTimeControl (0x0020 4028) as following:
ExposureTimeControl
Function
0x1: Manua(l*)
Take procedence ExposureTime setting.
0x2: Auto
Auto exposure control(AE)
・Control of ExposureTime (manual)
Control by IIDC2 address
Sets ExposureTime register (0x0020 403C). The absolution value of ExposureTime is calculated by the
following formula:
ExposureTime (abs) = ExposureTime / 37,500,000 [sec]
Control by Legacy address
The exposure time is set by a rational number. The absolution value of ExposureTime is calculated
by the following formula:
ExposureTime (abs) = Shutter speed numerator / Shutter speed denominator [sec]
54 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
DigitalIOControl
This section describes DigitalIOControl features.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
55 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
TimerControl
This section describes TimerControl features.
This camera series is able to generate Timer0Active signal beginning from trigger or exposure start signal.
This signal can be used as strobe control signal.
Hardware Trigger Input
Internal Trigger
(Selected by TriggerSource)
TriggerDelay
Exposure
ExposureActive
Timer0Active
TimerTriggerSource = Line0Active
TimerTriggerSource = FrameTrigger
Delay
TimerTriggerSource = ExposureStart
Duration
※ ActiveLow
Timer0Active
56 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Gain
This section describes Gain feature. This control adjusts an amplification factor applied to the output signal.
Gain feature adjusts manual gain. GainAuto feature adjusts gain automatically.
output
signal
Gain
input signal
● Note
・Setting of Gain control
Set to GainControl (0x0020 4068) as following:
ExposureTimeControl
Function
0x1: Manua(l*)
Manual Gain setting.
0x2: Auto
Auto gain control(AGC)
・Control of Gain (manual)
Sets Gain register (0x0020 407C).
For more details information, please see “ALC Control”
57 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
BlackLevel
This section describes BlackLevel feature. This control adjusts the black level applied to the output signal.
It is adjustable from -25% to +25% as white saturation level is 100%.
If BlackLevel is set lower than 0[%], the image level may not be saturated.
255(@8bit)
Black
Level
0
saturation level
Gamma
This section describes Gamma feature. This control adjusts the gamma correction of pixel intensity.
output
luminance
Gamma
input
luminance
58 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Sharpness
This section describes Sharpness feature. This control enhances the edges of the image.
The edge enhancement will become stronger when the setting value is larger.
This function is available only in Mono models.
Sharpness=0
Sharpness=4
Sharpness=7
BalanceRatio
This section describes BalanceRatio feature (White balance).
BC series has Manual WhiteBalance, One Push WhiteBalance (OPWB) and Auto White Balance (AWB).
In AWB, R-Gain and B-Gain are adjusted automatically. In OPWB, R-Gain and B-Gain are adjusted once
from RGB information of current frame.
This function is available only in Color models.
59 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
● Note
・Setting of WhiteBalance control
Set to WhiteBalanceControl (0x0020 5068) as following:
WhiteBalanceControl
機能
0x1: Manual(*)
Manual WhiteBalance control
0x2: Auto
Auto WhiteBalance control
0x3: OnePush
One Push WhiteBalance control
・Manual WhiteBalance
In WhiteBalanceControl = Manual setting, set value to WhiteBalanceR (0x0020 507C) or
WhiteBalanceB (0x0020 509C).
・Auto WhiteBalance
In WhiteBalanceControl = Auto setting, camera adjust WhiteBalanceR and WhiteBalanceB automatically.
AWB is activate in color temperature from 2500K to 6500K.
・One Push WhiteBalance
At WhiteBalanceControl = OnePush set, camera adjust WhiteBalanceR and WhiteBalanceB once.
・ALCPhotometricAreaSize
In WhiteBalanceControl = Auto or OnePush set, the register setting of ALCPhotometricAreaSize is
refered as the measuring luminance.
For more details information, please see “ALCControl”.
60 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
ALCControl
This section describes ALCControl feature.
This camera series provides some registers to adjust the various parameter of ALC operation.
-
ALCPhotometricAreaSize defines photometric area size for measuring luminance.
This area size is reffered in AE, AGC and AWB.
100% (H:100% x V:100%)
64% (H:80% x V:80%)
16% (H:40% x V:40%)
ALCPhotometricAreaSize (e.g. 100%, 80%, 40%)
-
ALCExposureValue defines a correction value for a convergence value.
Final convergence value is determined by the following formula.
Final convergence value = 84(Reference Luminance) * 2(ALCExposureValue/10)
61 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
- ALCExposureTimeMin / ALCExposureTimeMax define the following range of AE operation.
Set the following value to “ALCExposureTimeMin”, “ALCExposureTimeMax” register. AE mode operates
at a range of a register value.
You shall set “ExposureTimeMin” < “ExposureTimeMax”.
If you set “ExposureTimeMax” longer than a frame rate period, a frame rate may be slower than the
register setting.
The range of register setting depends on camera model, and camera operation mode.
This function is available only in Color models.
AE range
ALCExposureTimeMin
ALCExposureTimeMax
Minimum
as same as maximum value of Manual mode
more than ALCExposureTimeMin
Maximum
less than ALCExposureTimeMax
as same as minimum value of Manual mode
* initial factory setting: ExposureTimeMin = minimum value, ExposureTimeMax = 1 s
- ALCGainMin / ALCEGainMax define the following range of AE operation.
Set the following value to “ALCGainMin”, “ALCGainMax” register. Setting value is Float type. AGC mode
operates at a range of a register value.
You shall set “GainMin” < “GainMax”.
This function is available only in Color models.
AGC range
ALCGainMin
ALCGainMax
Minimum
0.00[dB] (*)
more than ALCGainMin
Maximum
less than ALCGainMax
24.00[dB] (*)
* initial factory setting
62 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
LUTControl
This function allows you to apply the arbitrary LUT(input: 12it, output: 12bit) to the output images.
Output
luminance
Binarization
Input
luminance
example of LUT setting
63 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
SequentialShutterControl
Sequential Shutter function performs sequential capturing with applying the settings of UserSet that have
been made entry in advance.
Entry1 = UserSet1
Entry2 = UserSet4
ExposureTime = 10ms
...
Sensor
Frame
ExposureTime = 2ms
...
Sequence
Index = 1
Entry3 = UserSet2
ExposureTime = 20ms
...
Sequence
Index = 2
Entry1 = UserSet1
ExposureTime = 10ms
...
Sequence
Index = 3
Sequence
Index = 1
Exposure3
Exposure4
...
...
SequentialShutterTerminateAt = 3
Exposure
Exposure1
Exposure2
Image Streaming
on Interface Bus
Frame1
Frame2
Frame3
Frame4
Sequential Shutter
● Note
- Changing ‘SequentialShutterEnable’, ’SequentialShutterTerminateAt’, ’SequentialShutterIndex’,
‘SequentialShutterEntry’ register value is invalid during image stream data output.
- The following table is the list of registers applied to “SequentialShutter”.
List of registers to be applied to SequentialShutter
Category
ImageFormatControl
Register
OffsetX
Category
AnalogControl
Register
Gain
OffsetY
BlackLevel
ExposureControl
ExposureTime
Gamma
DigitalIOControl
UserOutputValueAll
Sharpness
LineSource
BaLanceRatio
CounterAndTimerControl
TimerDuration
LUTControl
LUTEnable
TimerDelay
64 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
DPCControl
This DPC (Defective Pixel Correction) function corrects defective pixels from the image sensor. Specifying X
and Y coordinates of the defective pixels, the defective pixels are corrected by calculation from the
neighboring pixels.
● Note
・On /Off of DPC function
Set value to DPCEnable register.
Setting value
Function
0x0: OFF
Disable
0x1: ON(*)
Enable
*factory default
・Setting of DPC coordinate
Set the value to DPCNumber register.
The defective pixels are corrected by calculation from the neighboring pixels by setting to coordinate to
DPCValue register. If defective pixel exists plural number, these defective pixels are corrected by
set coordinate to another DPCValue register.
・Sort of DPCValue
The settings of coordinate in DPCValue[X1][Y1], [X2][Y2] … register need to sort that from
upper left(0, 0) → upper right (WidthMax-1, 0) → lower left (0, HeightMax-1) → lower right
(WidthMax-1, HeightMax-1).
65 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
UserSetControl
You are able to save a user setting to the non-volatile or volatile memory of the camera.
There are 15 user memory channels for user setting.
By using user memory, you are able to restore frequent used settings at the time of next start-up.
List of registers to be applied to UserSet
Category
TransportlayerControl
ImageFormatControl
Register name
CameraLink Tap
TriggerControl
ExposureControl
TimerControl
TimerTriggerSource
TimerDuration
Width
TimerDelay
AnalogControl
GainControl
OffsetX
Gain
OffsetY
BlackLevel
Binning
Gamma
Decimation
Sharpness
Reverse
WhiteBalanceControl
PixelFormat
WhiteBalanceR
TestPattern
WhiteBalanceB
AcquisitionFrameRateEnable
ALCControl
ALCPhotometricAreaSize
AcquisitionFrameRate
ALCExposureValue
AcquisitionFrameIntervalControl
ALCExpusureTimeMin
AcquisitionFrameInterval
ALCExpusureTimeMax
TriggerMode
ALCGainMin
TriggerSequence
ALCGainMax
TriggerSource
LUTControl
LUTEnable
TriggerAdditionalParameter
SequentialShutterControl
SequentialShutterEnable(*)
TriggerDelay
SequentialShutterTerminateAt(*)
ExposureTimeControl
SequentialShutterEntry(*)
ExposureTime
DigitalIOControl
Register name
CameraLink CLK
Height
AcquisitionControl
Category
DPCControl
DPCEnable(*)
LineModeAll
DPCNumber(*)
LineInverterAll
DPCEntryX(*)
UserOutputValueAll
DPCEntryY(*)
LineSelector
LineSource
(*) DPC and SequentialShutter entries are stored to a single channel. Entries are shared with all channels.
66 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Status / Expanded status
(Legacy protocol only)
If returned [NAK] at sending command to camera, the error status is wrote to status register and expanded
status register.
● Note
The register value and content are described as follows:
Status
Expanded
(0x69)
status
Classification
Description
(0x6A)
0x00
0x00
No Error
No error
0x02
0x01
General
Accessed to reserve area.
0x02
Accessing Error
Read access to write only register.
0x03
Write access to read only register.
0x04
The write value is out of range.
Baudrate
(GenCP Only)
If GenCP used, the baudrate is possible to change.
*In Legacy protocol used, the baudrate is fixed 9600 bps.
Register
Read Memory Default
Register name
Description
address
Write
Save
0x0001 0000
R.O.
-
0x91
Supported Baudrates
0x91 (9600, 115200, 921600bps)
0x0001 0004
R/W
-
0x00
Current Baudrate
Current baudrate
0x00:auto recognition
0x01:9600bps,
0x10:115200bps,
0x80:921600bps
67 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Warranty rules
● Warranty term
Warranty term is 36 months after your purchase. We may assume the date of the purchase from our
shipping date when the date is unidentified.
● Limited Warranty
Free warranty is not applicable for the troubles, damages or losses caused by the cases of the followings,
even if it is during the warranty term.
1. Natural exhaust, wear or degradation of a component parts
2. Handling against the instructions and conditions described in the instruction manual
3. Remodeling, adjustment and the part exchange. (including the opening of the enclosure box and the
alteration)
4. Using the accessories not included with the product or our non-designated optional articles
5. Damages caused during the transportation or deficiency of the handling such as drop or fall of the
products after the products having been transferred to customers, leaving the products to corrosive
environment such as sunlight, fire, sand, soil, heat, moisture, or an inappropriate storing method
6. A fire, an earthquake, a flood, a lightning, or other natural disasters, pollution and a short circuit,
abnormal voltage, excessive physical pressure, theft, other accident
7. When connected to a product which is not recommended
8. When connected to the power supply which is not suitable
9. Forgery product, products which does not have proper serial number, products of which serial number
is forged, damaged or deleted
10. All defects that happened after the expiration for a warranty term
68 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm
Repair
● Repair methods
Basically, has to return it to our company when the user requests us to repair product.
In the case, exchange to a replacement or an equal function product.
● Repair request methods
On the occasion of a repair request, please return the defective product with the failure situation report sheet
to be filled out. The failure situation report sheet is possible to download from homepage of our company.
Please read the following instructions carefully.
1. Please return our product alone, taking out of your equipment in case that our product is installed to an
equipment
2. We are unable to return the information such as your own serial numbers, control number, the
identification seal, if it is attached to the returned products. Please keep record before you return the
product.
3. As the data saved in the camera will not be kept after the repair, please take out data before return.
4. We are unable to accept the cancellation after the repair request by the customer's reason.
5. About the repair product shipping expenses, please bear the charges when you return the product to
us. We bear the charges to you from us only for a warranty period.
6. We are unable to accept your request of a delivery date and time of the product return, or the delivery
method.
7. We are unable to accept a trouble factor investigation, the request of the repair report.
8. We accept a repair of out of warranty product, if it is reparable.
9. The proprietary rights of the repair request products after the exchange repair belong to us.
10. The immunity from responsibility of the product is applied in the repair completion products.
* Please refer for the inquiry about the software to our homepage or sales personnel.
69 / 69
Copyright © 2016-2018 TOSHIBA TELI CORPORATION, All rights reserved.
D4272607A
http://www.toshiba-teli.co.jp/en/index.htm

advertisement

Key Features

  • 5MP resolution
  • 2/3" CMOS sensor
  • Global shutter
  • Camera Link with PoCL
  • Random Trigger Shutter
  • Color processing
  • White balance
  • Optional IR-cut filter
  • High frame rate
  • Compact design

Related manuals

Frequently Answers and Questions

What type of shutter does the BC505LMCF use?
The BC505LMCF utilizes a global shutter, which captures the entire image simultaneously, minimizing motion blur.
Does the BC505LMCF support Power over Camera Link (PoCL)?
Yes, the BC505LMCF supports PoCL, allowing for power delivery through the Camera Link cable, simplifying installation.
What is the maximum frame rate for the BC505LMCF?
The BC505LMCF supports a maximum frame rate of 36fps.
Download PDF

advertisement