VSSL A.3 Quick Start Manual

Add to My manuals
5 Pages

advertisement

VSSL A.3 Quick Start Manual | Manualzz
USING ALEXA WITH VSSL
B AC KG R O U N D
You can use Alexa with VSSL, by connecting an Echo Dot to an input on the
VSSL. As an input all of the control and volume can be controlled by Alexa. In the
VSSL app, you can select the Echo Dot as a source on any room.
In this guide we will recomend how to connect an Echo Dot and configure your
VSSL to work with it.
1. CONNECT THE ECHO DOT
Via Cable:
If you your Echo Dot can be installed in close proximity to your VSSL then
it is best to connect the Echo Dot to the VSSL via an analog audio cable.
For example: you have an Echo Dot on a counter top and the VSSL stored
in a cubord below.
You’ll need to purchase a 3.5mm to RCA cable. Like the one shown below:
Connect the 3.5mm end of the cable to the Echo Dot and the RCA end
of the cable to an input on the VSSL:
A.3 Inputs: Bus In, Zone In 1-3
A.6 Inputs: Bus In 1-2, Zone In 1-6
USING ALEXA WITH VSSL
Via Bluetooth Receiver:
If your VSSL isn’t in close you may be able to use a Bluetooth receiver.
These receivers can work well up to 50-70ft indoors depending on the
obstacles.
Here are some receivers on Amazon for reference:
• Logitech Bluetooth Audio Adapter for Bluetooth Streaming :
http://a.co/coGcCV6
• Mii 230ft LONG RANGE Bluetooth Transmitter Receiver Bluetooth Audio
Adapter
http://a.co/bG0o8TX
• Besign Long Range Bluetooth Transmitter and Receiver
http://a.co/i899vDi
Connect the Receiver to the VSSL
Depending on the receiver you may need a 3.5mm to RCA cable or an RCA
to RCA cable.
Pair Your Echo Dot to the receiver
To pair your Echo Dot say, “Alexa, pair”.
Reference: https://www.amazon.com/gp/help/customer/display.html?nodeId=201549660
USING ALEXA WITH VSSL
2 . CO N F I G U R E YO U R VSS L
Now that the connection has been made, we will name the input in the
VSSL app so this source can be played to any room in your house.
Open the VSSL app and go to settings. Select the device you connected
the Echo Dot to via cable or bluetooth reciever. Under Analog Names,
selece ‘INPUT NAMES’.
USING ALEXA WITH VSSL
Set the name of the input
USING ALEXA WITH VSSL
Now you can select the Echo Dot on any room in the house. Press the
icon. Note that the VSSL will default to play the Echo as long as the it is
selected on the home screen.

advertisement

Related manuals

Download PDF

advertisement