Schluter SES2D6EB Shelf-E Brushed Stainless Steel Curve Pentagon Corner Shelf Use and Care Manual

Add to My manuals
42 Pages

advertisement

Schluter SES2D6EB Shelf-E Brushed Stainless Steel Curve Pentagon Corner Shelf Use and Care Manual | Manualzz

SHOWER SYSTEM

I N N O V A T I V E S O L U T I O N S F O R C E R A M I C A N D S T O N E T I L E

I N T E G R A T E D B O N D E D W A T E R P R O O F I N G S Y S T E M F O R T I L E D S H O W E R S

The Schluter

®

-Shower System is an integrated family of products that together form a fully bonded, watertight assembly for tiled showers. Unlike shower pan liners in conventional assemblies, bonded waterproof membranes, such as Schluter

®

-

KERDI, bond directly to the mortar bed and protect it from becoming saturated with regular use. In addition, the KERDI membrane or Schluter

®

-KERDI-BOARD waterproof building panel protect wall cavities from vapor penetration. The

Schluter

®

-KERDI-DRAIN, Schluter

®

-KERDI-

DRAIN-H, and Schluter

®

-KERDI-LINE shower drains provide a simple and secure connection to the KERDI membrane at the top of the assembly. Other components include the Schluter

®

-KERDI-SEAL-PS/-

MV prefabricated seals and the Schluter

®

-

KERDI-FIX adhesive/sealant, used to treat protrusions through the membrane, and the

Schluter

®

-KERDI-SHOWER and Schluter

®

-

KERDI-BOARD prefabricated substrates, which can reduce weight and installation time. The integrated Schluter

®

-Shower

System eliminates leaks, reduces the potential for efflorescence and mold growth in the system, and dramatically reduces total installation time to ensure success and make shower installation easier than ever.

8.1 Schluter ®

-KERDI

8.2 Schluter ®

-KERDI-DRAIN

8.7 Schluter ®

-KERDI-LINE

8.3 Schluter ®

-KERDI-SHOWER

-R/-CB

8.1 Schluter ®

-KERDI-BAND/

-KERECK/-KERS

12.1 Schluter ®

-KERDI-BOARD

8.3 Schluter

8.8 Schluter ®

®

-KERDI-SHOWER-T/-TS/-TT

-KERDI-SHOWER-LT/-LTS

12.1 Schluter ®

- KERDI-BOARD

-SB/-SC/-SN

8.1 Schluter ®

-KERDI-SEAL-PS/-MV

17.1 Schluter ®

-SHELF-E/-W/-N

14.1 Schluter ®

-SHOWERPROFILE-S/-R

14.1 Schluter ®

- SHOWERPROFILE

-WS/-WSK

S H O W E R S Y S T E M

Prefabricated Shower Substrates

8.3 Schluter ®

-KERDI-SHOWER

-T/-TS/-TT

8.3 Schluter

®

-KERDI-SHOWER-T/-TS/-TT/-LT/-LTS

Density

Property

Compressive Strength 1

Method

ASTM D3575

ASTM D1621

Maximum Service Temperature -

1

Compressive strength measured at 10% deflection of foam

8.3 Schluter ® -KERDI-SHOWER-R

Property

Density

Maximum Service Temperature

Method

ASTM D3575

-

Value

3.75 lb/ft 3 (60 Kg/m 3 )

80 psi (552 kPa)

175 °F (79 °C)

Value

3.75 lb/ft 3 (60 Kg/m 3 )

175 °F (79 °C)

8.3 Schluter

8.8 Schluter

Schluter ®

®

®

-R/-CB

-KERDI-SHOWER-LT/-LTS

12.1 Schluter

12.1 Schluter

-KERDI-SHOWER

®

-KERDI-BOARD

-SB/-SC

®

-KERDI-BOARD-SN

-KERDI-BOARD-KIT

Application and Function

8.3 Schluter ® -KERDI-SHOWER-T/-TS/-TT are sloped shower trays with integrated KERDI waterproofing. The trays are made of lightweight, expanded polystyrene for constructing mortarfree shower bases. Each of these shower trays are designed to integrate with Schluter ® -KERDI-

DRAIN. The trays include a KERDI collar for completing the waterproofing to the Schluter ® -

KERDI-DRAIN bonding flange.

KERDI-SHOWER-T is a standard tray with center drain placement available in 38" x 60" (97 x 152 cm) , 48" x 60" (122 x 152 cm), 48" x 72" (122 x 183 cm), 60" x 60" (152 x 152 cm), and 72" x

72" (183 x 183 cm) sizes.

(140 x 140 cm) , 36" x 55" (91 x 140 cm), 36" x

72" (91 x 183 cm), 38" x 76" (97 x 193 cm) and

76" x 38"

Schluter ®

(193 x 97 cm) sizes.

-KERDI-SHOWER-CB the Schluter ® with the Schluter ®

is a height compensation board made of lightweight expanded polystyrene used to accommodate the drain body and waste pipe height, when installing

-KERDI-DRAIN-H in conjunction

-KERDI-SHOWER-T/-TS/-TT shower trays. The compensation board can easily be cut to size to fit around the drain and waste pipe, and multiple boards can be used to fit the size and shape of the shower.

KERDI-SHOWER-TS is the standard tray with off-center drain placement available in a 38" x

60" (97 x 152 cm) size.

KERDI-SHOWER-TT features a thin perimeter height that simplifies construction of curbless showers. The tray is available in 32" x 38"

(81 x 97 cm)

36" x 36" and 48" x 48" x 38"

, 36" x 48"

(91 x 91 cm),

(122 x 122 cm)

(97 x 97 cm) sizes .

38" x 38"

(91 x 122 cm),

(97 x 97 cm), and neo-angle 38"

8.3 Schluter

® -KERDI-SHOWER-R is a lightweight, expanded polystyrene shower ramp with integrated Schluter ® -KERDI waterproofing designed to facilitate the construction of access ramps for tiled showers. The ramp integrates with the Schluter ® -Shower System to create accessible, curbless showers and adheres to the ADA's slope ratio. Ramp dimensions are 48" x 12" x 1-1/4" (122 x 30.5 x 3.2 cm) .

8.8 Schluter are polystyrene sloped trays with integrated

Schluter ®

® -KERDI-SHOWER-LT/-LTS

-KERDI waterproofing. Each of these prefabricated shower trays is designed to integrate with the Schluter ® -KERDI-LINE.

12.1 Schluter ® -KERDI-BOARD-SB/-SC are prefabricated substrates, made of Schluter ® -

KERDI-BOARD, which integrate with the

Schluter ® -Shower System. The substrates are waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing. The KERDI-BOARD-SB shower bench is available in triangular and rectangular configurations in the followings sizes (width x depth x height). The triangular benches are 16" x

16" x 20" (41 x 41 x 51 cm) and 24" x 24" x 20"

(61 x 61 x 51 cm) . Rectangular benches are 38" x 11-1/2" x 20" (97 x 29 x 51 cm) and 48" x 16" x 20" (122 x 41 x 51 cm) . The KERDI-BOARD-

SC shower curb can be used in conjunction with any shower base. Curb dimensions are 38" x 6" x 4-1/2" (97 x 15 x 11.5 cm),

(122 x 15 x 11.5 cm), x 15 x 11.5 cm).

48" x 6" x 4-1/2" and 60" x 6" x 4-1/2" (152

12.1 Schluter ® -KERDI-BOARD-SN is a prefabricated shower niche made of KERDI-

BOARD that can be installed in both KERDI and

KERDI-BOARD wall assemblies. The shower niche features a 1/2" (12.5 mm) -thick by 2"

(50 mm) -wide integrated bonding flange and is available in 12" x 6" (30 x 15 cm) , 12" x 12" (30 x

30 cm) , 12" x 20" (30 x 51 cm) , and 12" x 28" (30 x

71 cm) sizes.

Schluter ® prefabricated shower substrates provide an alternative to shower bases constructed of mortar and other shower elements constructed of framing and solid backing. The shower tray, curb, ramp, bench, and niche are especially useful in large-scale, repetitive jobs, such as hotels, apartments, and condominiums for the significant time savings that can be realized.

KERDI-SHOWER-LT allows for the installation of a center drain and is available in 39" x 39" x 100 cm)

55"

, 48" x 48"

(140 x 140 cm)

(122 x 122 cm) sizes.

(100

and 55" x

KERDI-SHOWER-LTS accommodates the installation of the drain along the perimeter of the shower and is available in 39" x 39" (100 x

100 cm) , 48" x 48" (122 x 122 cm) and 55" x 55"

Schluter ® -KERDI-BOARD-KIT combines all of the necessary components to waterproof the walls of your bathtub and acrylic shower base using waterproof building panels. The kit includes 1/2" x 48" x 38" (1.25 cm x 122 cm x 97 cm) KERDI-BOARD waterproofing panels,

KERDI-BAND, pipe and mixing valve seals, screws and washers, plus 9.81 fl oz (290 ml) of

KERDI-FIX sealant in bright white. The KERDI-

S H O W E R S Y S T E M

BOARD-KIT provides enough KERDI-BOARD to cover up to 101 ft² (9.4 m²) of wall area.

Material Properties and

Areas of Application

KERDI-SHOWER-T/-TS/-TT/-LT/-LTS/-R prefabricated substrates are manufactured using lightweight expanded polystyrene. The products require no special disposal and can be recycled.

No CFCs or HCFCs are present in either the products or in the manufacturing process. The polystyrene foam trays and the shower ramp each have a density of 3.75 lb/ft 3 (60 kg/m 3 ) with an 80 PSI (552 kPa) compressive strength at 10% deformation. It is serviceable in temperatures up to 175ºF (79ºC).

The expanded polystyrene used to manufacture KERDI-SHOWER-T/-TS/-

TT/-LT/-LTS/-R is treated with a flame retarding agent. Expanded polystyrene should not be exposed to hydrocarbons, esters, amines, and aldehydes. All will deteriorate foam. Exposure to ultraviolet rays (sunlight) for long periods of time will result in partial degradation (dusting) at the surface.

KERDI-BOARD-SB/-SC prefabricated substrates are manufactured using KERDI-BOARD, made from extruded polystyrene foam, with a cementfree reinforcement layer laminated to both sides with an anchoring fleece webbing. The surface features printed gridlines consisting of 3/8" x 3/8"

(10 x 10 mm) squares for precise cutting. KERDI-

BOARD is waterproof and vapor-retardant and can withstand all chemical stresses that typically occur in conjunction with ceramic tile coverings.

KERDI-BOARD will not warp, rot, or decay. It is serviceable in temperatures up to 158°F (70 °C).

Waterproofing Membrane

8.1 Schluter ®

-KERDI

Since traditional shower pan liners are placed below the mortar setting bed in conventional assemblies, moisture is allowed to saturate the mortar bed. This can increase the risk of leakage, cause efflorescence, and foster mold growth. Bonded waterproof membranes, such as KERDI, are set on top of the mortar bed and protect it from becoming saturated, thus eliminating the problems associated with traditional systems.

Application and Function

8.1 Schluter ® -KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities.

It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to

3 anchor the membrane in the thin-set mortar.

Tiles can be installed directly on the KERDI membrane using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used. Schluter ® -KERDI-DS is a bonded waterproof membrane and vapor retarder with very low water vapor permeance for use in continuous use steam rooms and similar applications.

Various KERDI waterproofing accessories are available. Preformed, seamless corners include the following. KERDI-KERECK-F are used to seal

90° inside and outside corners. KERDI-KERS-B are used to seal 135° corners at triangular shower benches and neo-angle shower curbs.

KERDI-KERS are used to seal floor/wall/ shower base connections in curbless shower applications where the KERDI-LINE linear drain is installed adjacent to the wall. KERDI-SEAL-

PS/-MV are prefabricated sections of KERDI with overmolded rubber gaskets that are used to seal pipe protrusions through the KERDI waterproofing membrane (e.g., at showerheads and tub spouts) and protect moisture-sensitive backing panels at the mixing valve. Use KERDI-

BAND, in widths of 5" (12.5 cm) , 7-1/4" (18.5 cm) , or 10" (25 cm) , to seal butt joints or corner joints. KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.

Material Properties and

Areas of Application

is suitable for use in continuous use steam rooms and other applications with similar vapor management requirements.

KERDI and KERDI-DS meet the American

National Standard for Load Bearing, Bonded,

Waterproof Membranes for Thin- Set Ceramic

Tile and Dimension Stone Installations

(ANSI A118.10). The membranes are listed by c UPC® and evaluated by ICC-ES (Report

Nos. ESR-2467 and PMG-1204). For copies of these documents, please contact

Schluter ® - Systems at 800-472-4588 (USA) or

800- 667-8746 (Canada) or by e-mail at info@ schluter.com. Links to the documents can also be accessed at www.schluter.com.

KERDI and KERDI-DS have been evaluated according to the "Standard Method for the

Testing and Evaluation of Volatile Organic

Chemical Emissions from Indoor Sources Using

Environmental Chambers, Version 1.1" for

California Specification 01350 and found to comply with the VOC requirements. California

Specification 01350 is referenced by various green building standards and rating systems.

Waterproof Building Panel

KERDI features a modified polyethylene (PEVA) core with non-woven polypropylene on both sides. KERDI-DS features a high-density polyethylene (HDPE) core with non-woven polypropylene on both sides. KERDI is 8-mil thick and has a water vapor permeance of 0.90 perms, when tested according to ASTM E96, using Procedure E at 90% relative humidity.

KERDI-DS is 20-mil thick and features additives to produce a water vapor permeance of 0.18 perms.

12.1 Schluter

®

-KERDI-BOARD

The KERDI-BOARD waterproof building panel simplifies shower installation by combining the tile backing and waterproofing installation into a single step. KERDI-BOARD gives tile setters more control over their projects by providing them with the means to simply and easily create ideal substrates for tile. Unsuitable substrates can be remedied and new substrates can be created while keeping the requirements of the tile covering in mind.

KERDI and KERDI-DS are waterproof and resistant to most chemicals commonly encountered in tiled environments. They are resistant to aging and will not rot. KERDI and KERDI-DS are highly resistant to saline solutions, acid and alkaline solutions, many organic solvents, alcohols, and oils. Information regarding their resistance to specific substances can be provided if concentration, temperature, and duration of exposure are known. For acidresistant coverings, use an epoxy adhesive to set and grout the tile.

KERDI and KERDI-DS are used on wall and floor surfaces where protection against the penetration of moisture or other harmful substances is necessary. KERDI is suitable for showers, intermittent use steam showers, tub surrounds, and areas surrounding swimming pools. Industrial applications include the food industry, breweries, and dairies. KERDI-DS

Application and Function

12.1 Schluter ® -KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar.

With the available panel thicknesses of 3/16",

3/8", 1/2", 5/8", 3/4", 1", 1-1/2", and 2"

(5, 9, 12.5, 15, 19, 25, 38, and 50 mm) ,

KERDI-BOARD covers a broad range of application areas for creating flat, level, plumb, square, and dimensionally stable substrates for the installation of ceramic and natural stone tiles. With suitable preparation of the abutting seams and joint areas, the panel may be used for bonded waterproofing assemblies.

S H O W E R S Y S T E M

KERDI-BOARD is suitable for: creating tile substrates on masonry walls, wood or metal framing, and other finished wall surfaces; creating straight or curved partition walls; creating straight or curved bathtub and shower surrounds; concealing pipes and columns; as well as creating bathtub platforms, vanities, storage shelves, countertops, and various other bathroom structures.

The boards are simply cut to size with a utility knife. The gridlines, which are printed on the surface, are helpful for neat and quick cuts and installation. KERDI-BOARD can be fully adhered in wall areas or spot-bonded with thin-set mortar. If necessary, the material may be secured with additional wall anchors. In the case of stud framing, KERDI-BOARD is attached with screws and washers from the matching hardware system. Tiles can be installed directly over KERDI-BOARD using the thin-set method.

12.1 Schluter

Property

Water vapor permeance

Thermal resistance (R-value)

ASTM E96

ASTM C518

Service temperature range

Flame spread/smoke developed

Thermal barrier evaluation

ASTM E84

NFPA 286

1

Using the desiccant method at 100°F (38°C) and 90% RH

2 Per International Building Code Requirements

3 Porcelain tile used as thermal barrier over 1/2" (12.5 mm) -thick KERDI-BOARD on wood framing or fully embedded in thin-set mortar where walls are sufficiently even and plumb.

Maintenance

®

-KERDI-BOARD

Method

1

Value

0.36 perms - 1/2" (12.5 mm)

R 9.1 – 2" (50 mm)

R 2.2 – 1/2" (12.5 mm)

R 0.9 – 3/16" (5 mm)

-58 ° F to 158 ° F (-50 ° C to 70 ° C)

Pass 2

Pass 2,3

Application and Function

L-shaped and U-shaped KERDI-BOARD panels are available for creating pipe and column coverings, and grooved panels are available for creating curved elements. Schluter ® -Systems also offers profiles and attachment hardware for wall connections and finishing edges, as well as matching wall anchors and screws.

Material Properties and

Areas of Application

Storage

KERDI-BOARD should be stored flat. In case of outdoor storage, protect the material from direct sunlight and weather exposure.

Shower Drains

8.2 Schluter ® -KERDI-DRAIN is a shower drain specifically designed to allow connections to

KERDI or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. KERDI-DRAIN consists of a drain body and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.

KERDI-BOARD is made from extruded polystyrene foam, with a cement-free reinforcement layer laminated to both sides and an anchoring fleece webbing. The surface of the board has gridlines consisting of 3/8" x 3/8" (10 x 10 mm) squares printed on one side.

8.2 Schluter ®

-KERDI-DRAIN

KERDI-BOARD is waterproof and vapor retardant and can withstand all chemical stresses that typically occur in conjunction with ceramic tile coverings. KERDI-BOARD may be used in bonded waterproofing assemblies where required. KERDI-BOARD is completely flat and will not warp, even with one-sided exposure to temperature and moisture fluctuations. It will not rot or decay. KERDI-BOARD can be used in a multitude of different application areas. In special cases, the suitability of the material must be verified based on the anticipated chemical and mechanical stresses. The information provided below is intended as general guidelines.

Structures on which KERDI-BOARD is to be installed must be stable and meet any other project-specific requirements. Select a suitable material thickness if using KERDI-BOARD for the construction of freestanding partition walls, shelving, or similar structures, and use reinforcement profiles as necessary. Arrange supports made of KERDI-BOARD at regular intervals consistent with conventional building practices. Select the material thickness and installation method depending on the evenness of the substrate. KERDI-BOARD can be spotbonded to walls to correct substrate variations

Schluter

®

-KERDI-DRAIN-H

8.7 Schluter ®

-KERDI-LINE

Conventional two-stage drains are designed to connect to shower pan liners below the mortar bed and do not allow a secure, watertight connection to bonded waterproof membranes at the top of the drain assembly. KERDI-DRAIN and

KERDI-LINE are designed specifically to ensure a simple and secure connection to bonded waterproof membranes, such as KERDI, at the top of the assembly rather than below it, thereby reducing the risk of leakage, efflorescence, and mold growth.

The standard KERDI-DRAIN is attached directly to the waste line. The drain body is available in ABS, PVC, or stainless steel. The plastic drain bodies feature a fleece-covered bonding flange. They are available with standard 2" (50 mm) and 3" (75 mm) outlets and attached to the pipe using an appropriate solvent cement.

The stainless steel drain bodies are available with standard 2" (50 mm) or 3" (75 mm) no-hub outlets or 2" (50 mm) threaded outlet. The no-hub outlets are attached to the pipe using an appropriate mechanical (e.g., flexible or no-hub) coupling. The threaded outlets are attached to the pipe using thread sealing compound or tape. The simple connection to standard drain outlets makes KERDI-DRAIN suitable for new construction and renovation.

The Schluter

® -KERDI-DRAIN-A adaptor kits are designed to convert clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g., when they are set in concrete slabs). The adaptor kit includes a stainless steel adaptor ring, available in 5-1/4" (133 mm) and 7-1/2" (191 mm) diameter sizes, with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring drains. The adaptor ring replaces the clamping ring and is attached to the existing drain body using the clamping ring bolts. This connection is made watertight via the rubber gasket and

Schluter ® -KERDI-FIX adhesive/sealant. The adaptor drain with integrated bonding flange slides into the adaptor ring with the over-

S H O W E R S Y S T E M molded rubber gasket ensuring a watertight seal. Adaptor kits are suitable for both mortar beds and KERDI-SHOWER-T/-TS/-TT shower tray applications.

The KERDI-DRAIN grate assembly consists of a frame, which can be seamlessly adjusted to the thickness and layout of the ceramic tile or stone covering via the height adjustment collar and lateral adjustment ring and grates or cleanout covers that are placed within the frame. The 4"

(100 mm) standard grate assembly frame features an approximately 1/8" (3 mm) wide reveal after installation and grate/frame combinations are available in stainless steel in CLASSIC design or anodized aluminum in CONTOUR design, both available in a variety of finishes. The 4"

(100 mm) frame features a minimal reveal after installation.

It is made of brushed stainless steel and can be combined with one of three grate design options:

FLORAL (E), CURVE (F), or PURE (G). Various metallic and color-coated finishes are available.

The 4" (100 mm) steel plate with KERDI laminated on the surface to allow for bonding of ceramic or stone tile, which creates a virtually invisible drainage line. The 6"

(150 mm) assembly frames feature an approximately 3/16"

(5 mm) wide reveal after installation and can be combined with stainless steel grates in CLASSIC design or a square cleanout cover. Please note that 6"

KERDI-DRAIN-STYLE grate assembly

TILE grate is a square stainless

square and round stainless steel grate

(150 mm) grate assemblies and grate assemblies used with the 5-1/4" adaptor kits only allow vertical and tilt adjustment

(no lateral adjustment).

(133.4 mm)

Schluter

® -KERDI-DRAIN-H is a shower drain with an integrated bonding flange that provides as large contact area for a secure connection to Schluter ® -KERDI waterproof membrane at the top of the assembly. KERDI-DRAIN-H is appropriate for both mortar bed and Schluter ® -

KERDI-SHOWER-T/-TS/-TT shower tray applications. The bonding flange is sloped to simplify installation of the mortar bed.

8.7 Schluter ® -KERDI-LINE is a low profile linear shower drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities.

KERDI-LINE consists of a formed stainless steel channel body and grate assembly or covering support to which tile is applied.

The channel body features a standard 2" (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical (e.g., flexible or no-hub) coupling. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation.

KERDI-LINE is available with both center and off-set outlets. The off-set outlet is located 8"

(20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. KERDI-

LINE includes a corresponding polystyrene foam channel support to set the drain elevation to the corresponding KERDI-SHOWER-LT/-LTS shower trays. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. KERDI-LINE is available in channel lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides.

KERDI-DRAIN-H provides a horizontal connection to the drain pipe and is available in ABS or PVC with a 2" (50 mm) outlet. It is ideal for applications where the use of a vertical connection to the drain pipe is not possible or practical (e.g., suspended or post-tension concrete floors, basement slabs, or wood floor installations where relocating the hole in the floor is not practical). The horizontal outlet allows the positioning of the drain in the desired area regardless of drain pipe location.

A compensation board is available for use with KERDI-DRAIN-H in conjunction the KERDI-

SHOWER-T/-TS/-TT shower trays.

KERDI-DRAIN-H is compatible with the standard

KERDI-DRAIN grate options. Please refer to the previous section on KERDI-DRAIN for details.

The KERDI-LINE grate assembly consists of a stainless steel frame that can be seamlessly adjusted to the thickness of the ceramic tile or stone covering – 1/8" to 1" (3 mm to 25 mm) for standard grate assemblies and 1/4" to 23/32"

(6 mm to 18 mm) for KERDI-LINE-STYLE grate assemblies – and stainless steel grates that are placed within the frame. The standard grate assembly frame features a 3/8" (10 mm) wide reveal after installation and can be combined with one of two grate options: SOLID (A) or SQUARE

(B). Each standard assembly is available in a brushed, chrome, or textured color-coated finish.

The SQUARE (B) option is also available with a locking mechanism (brushed stainless steel, 3/4"

– 19 mm frame only) for applications where tamper resistance is desired or required (e.g., healthcare and education facilities, etc.). The KERDI-LINE-

STYLE grate assembly frame features a minimal reveal after installation and can be combined with one of three grate options: FLORAL (E),

CURVE (F), or PURE (G). Each STYLE assembly is available in a brushed finish. The TILE grate (D) consists of a frameless, tileable covering support that is placed flush with the top of the channel body and can therefore accommodate any thickness tile covering. If KERDI-LINE is placed at shower entrance, it is recommended that grate assembly A or the TILE grate is chosen and that the drainage openings span the maximum

5 width of the entrance to limit potential overflow; secondary drainage (e.g., KERDI-DRAIN-F) may be required in the drying area.

Schluter ® -KERDI-LINE-FC is a stainless steel cover plate for use with KERDI-LINE to create a seamless look in applications where multiple drains are installed end-to-end. KERDI-LINE-FC is available in a brushed, chrome, or textured color-coated finish and is designed for use with either the SOLID (A) or SQUARE (B) grates.

14.1 Schluter ® -SHOWERPROFILE-S/-R system profiles represent an elegant solution for finishing the area between the floor and the first course of wall tile in a way that eliminates cutting wedges of tile and ensures a consistent elevation of the first course of wall tile in KERDI-LINE applications. SHOWERPROFILE-S consists of a trapezoid-perforated anchoring leg with a groove, which accepts a tapered brushed stainless steel profile that matches the slope of the KERDI-SHOWER-L shower tray. The profile is adjusted to cover the exposed wall area and forms the visible surface. SHOWERPROFILE-R consists of a brushed stainless steel profile and corresponding channel. The profile is adjusted to fit the space between the KERDI-LINE and the wall tile and forms the visible surface in applications where the KERDI-LINE is placed adjacent to a wall.

Material Properties and

Areas of Application

KERDI-DRAIN, KERDI-DRAIN-H and KERDI-

LINE are suitable for use in residential and commercial applications, including areas subject to foot and wheelchair traffic, such as showers and wet rooms in homes, hotels, schools, healthcare facilities, etc.

Various configurations of KERDI-DRAIN,

KERDI-DRAIN-H and KERDI-LINE are listed by UPC® , CSA, and ICC-ES PMG. Relevant industry standard guidelines for floor drains with integrated bonding flange include methods

B422, B422C, SR613 and SR614 in the Tile

Council of North America's (TCNA) Handbook for Ceramic Tile Installation and Method 326DR in the Terrazzo, Tile and Marble Association of

Canada (TTMAC) Specification Guide 093000

Tile Installation Manual.

KERDI-DRAIN and KERDI-DRAIN-H drain flanges are formed using ABS, PVC, or stainless steel 304 (1.4301 = V2A). Plastic drain bodies feature a polypropylene fleece webbing on the surface of the bonding flange to accept a bond to thin-set mortar. The KERDI-DRAIN adaptor kits feature adaptor rings made of stainless steel

304 (1.4301 = V2A) with thermoplastic rubber gaskets and adaptor flanges made of ABS.

Drain grates are available in plain and coated stainless steel 304 (1.4301 = V2A) and anodized aluminum. The covering support is stainless steel

304 (1.4301 = V2A) with KERDI laminated on the surface.

S H O W E R S Y S T E M

The KERDI-LINE channel body is formed using stainless steel 316 L (1.4404 =V4A) and features a bonding flange with a KERDI collar laminated on the surface. KERDI is a bonded waterproof membrane with a modified polyethylene (PEVA) with non-woven polypropylene fleece on both sides to anchor the membrane in the thin-set mortar. The frame and grates are made of stainless steel 316 L (1.4404 =V4A). The channel support is made of pressure-resistant, expanded polystyrene (EPS). The KERDI-LINE-FC cover plate is roll-formed using stainless steel 316

L (1.4404 = V4A). The SHOWERPROFILE-S anchoring leg is made of recycled, rigid PVC.

The SHOWERPROFILE-S/-R profiles are made of stainless steel 316 L (1.4404 = V4A) with

KERDI laminated on the backside.

Clean the grates and profiles using neutral cleaners. Avoid the use of strong acids (e.g., hydrochloric, hydrofluoric) and bases/alkaline cleaners (e.g., bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools.

Even stainless steel requires periodic cleaning, which will maintain a neat appearance and reduce the risk of corrosion. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Shelves

Schluter ® -Systems drain grates are resistant to most chemicals encountered in tiled environments. In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses. In general, grates should be protected against abrasion or scratching.

Exceptions and special considerations are listed below.

Stainless steel can sustain high mechanical stresses and is particularly well suited for applications requiring resistance against chemicals and acids. For more severe chemical exposure, such as de-icing salts and chemicals used in swimming pools, we recommend the use of stainless steel 316 L, which offers even higher corrosion resistance than the

304. Even stainless steel cannot withstand all chemical exposures, such as hydrochloric acid, hydrofluoric acid or certain chlorine, chloride and brine concentrations.

Metallic-coated grates are stainless steel 304 with a metallic coating created using physical vapor deposition (PVD). The resulting metallic film is very hard and corrosion-resistant.

17.1 Schluter

®

-SHELF-E/-W/-N

Application and Function

17.1 Schluter ® -SHELF is a wall storage system available in brushed stainless steel or aluminum in a range of textured color-coated finishes including stone grey, cream, greige, bronze, matte black, and matte white. The shelves are 5/32" (4 mm) -thick and feature CURVE, FLORAL, PURE,

WAVE, and SQUARE designs. They can be used in showers and other tiled wall applications

(e.g., kitchens and baths). Schluter ® -SHELF-E is suitable for corner installations and available in three different shapes. It features 3/32" (2 mm)

-thick tabs that allow for installation with the tile or in retrofit applications. Schluter ® -SHELF-W is a rectangular shelf with two trapezoidperforated anchoring legs for installation on walls in conjunction with the tile. Schluter ® -SHELF-N is a rectangular shelf that fits the prefabricated

Schluter ® -KERDI-BOARD-SN shower niche. It is installed in conjunction with the tile.

Material Properties and Applications

Textured color-coated grates are stainless steel with a powder coat. Textured color-coated shelves are aluminum with a powder coat.

The coating is color-stable, UV-resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.

Schluter ® -SHELF is resistant to most chemicals encountered in tiled environments. In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses. Exceptions and special considerations are listed below.

Anodized aluminum grates feature an anodized layer that retains a uniform appearance during normal use. The surface may be damaged by grout or setting material. Therefore, these materials must be removed immediately.

Maintenance

KERDI-DRAIN, KERDI-DRAIN-H, KERDI-LINE, and SHOWERPROFILE-S/-R require no special maintenance and are resistant to mold and fungi.

The drain grates may be removed to clean the drain housing and the drain pipes.

Schluter ® -SHELF in stainless steel is produced using stainless steel 304 (1.4301 = V2A). Stainless steel can sustain high mechanical stresses and is particularly suitable for applications requiring resistance against chemicals and acids. However, even stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chlorine, chloride and brine concentrations, which may be present in detergents or swimming pools.

Schluter ® -SHELF with textured color-coated finishes are produced using aluminum that is color-coated with a powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Protect the shelf against abrasion and scratching.

Maintenance

Schluter ® -SHELF requires no special maintenance or care and is resistant to mold and fungi.

Clean shelves periodically using neutral cleaning agents. Avoid the use of strong acids (e.g., hydrochloric, hydrofluoric) and bases/alkaline cleaners (e.g., bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools.

Even stainless steel requires periodic cleaning, which will maintain a neat appearance and reduce the risk of corrosion. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Shower Profiles

14.2 Schluter ®

-WS/-WSC/-WSL

14.2 Schluter

®

-WSK/-WSC/-WSL

Application and Function

14.2 Schluter ® -SHOWERPROFILE-WS/-WSK system profiles, together with the Schluter ® -

SHOWERPROFILE-WSL/-WSC inserts, form a splashguard at the entrance of curbless showers.

Schluter ® -SHOWERPROFILE-WS is an anodized aluminum support profile that is set in conjunction with the tile using thin-set mortar. It has a 3/4"

(19 mm) –wide visible surface and a height of

5/16" (8 mm) . Where thicker tiles are used, simply fill the space below the profile with thinset mortar.

Schluter ® -SHOWERPROFILE-WSK is an anodized aluminum support profile that is adhered to the tile surface. It has a 2-1/16" (52 mm) –wide visible surface and a height of 5/16" (8 mm) .

The support profiles are combined with either the SHOWERPROFILE-WSL insert or the

SHOWERPROFILE-WSC insert.

Schluter ® -SHOWERPROFILE-WSL is an upright insert made of transparent polyurethane.

The insert is collapsible when stepped on or rolled over with a wheelchair. The insert protrudes

1-5/32" (29 mm) above the profile surface. The

6

S H O W E R S Y S T E M

SHOWERPROFILE-WSL insert does not comply with the Americans with Disabilities Act (ADA), since it exceeds the allowable height of a vertical transition despite being collapsible. Please check with local code officials for acceptance on projects where ADA guidelines must be observed before installation.

Schluter ® -SHOWERPROFILE-WSC is a semicircular insert made of semi-rigid PVC. The insert creates an inconspicuous transition from the shower area to the adjoining space and a 5/8" (16 mm) –wide visible surface. The insert protrudes

3/64" (1.2 mm) above the profile surface. The

SHOWERPROFILE-WSC insert complies with the

Americans with Disabilities Act (ADA).

Material Properties and Areas of

Application

Schluter

®

-KERDI-FIX Technical Data

Color

Basic raw material

Specific weight

Solvent content

Isocyanate content

Dry materials content

VOC emissions

Shear strength beech wood/beech wood

Shear strength aluminum/aluminum

Elongation at failure

Skinning

Curing

Permissible total movement

Processing temperatures

Temperature stability

Grey or bright white

Silyl-modified polymer (SMP)

Approx. 93.6 lb/ft 3 (1.5 g/ml)

0%

0%

Approx. 100%

0.0 mg/m 3

Approx. 435 psi (3 N/mm 2 )

Approx. 290 psi (2 N/mm 2 )

Approx. 200%

About 10 minutes

1/8" (3 mm) per 24 hours

About 20%

Don’t install at temperatures below 40 ºF (5 ºC)

-40 ºF (-40 ºC) to 212 ºF (100 ºC) , temporarily

356 ºF (180 ºC) [max. 30 minutes]

Very good

Not sensitive to frost

9.81 fl oz (290 ml)

The SHOWERPROFILE-WS/-WSK support profiles feature an anodized aluminum layer that retains uniform appearance during normal use. The surface, however, is susceptible to scratching and wear and may be damaged by grout or setting material. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue immediately from visible surfaces. In addition, ensure the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water.

Moisture resistance

Frost ability

Cartridge volume

Estimated coverage

5" (12.7 cm) connection to fixed building elements

1/4" (6 mm) bead

Adhesive/Sealant

12' 10" (3.9 m) per cartridge

30' 1" (9.2 m) per cartridge be verified based on the anticipated chemical, mechanical, and/or other stresses. KERDI-FIX is not recommended in or around swimming pool applications.

KERDI-FIX has been evaluated according to the

"Standard Method for the Testing and Evaluation of Volatile Organic Chemical Emissions from

Indoor Sources Using Environmental Chambers,

Version 1.1" for California Specification 01350 and found to comply with the VOC requirements.

California Specification 01350 is referenced by various green building standards and rating systems.

The SHOWERPROFILE-WSL insert is made of highly flexible polyurethane.

The SHOWERPROFILE -WSC insert is made of semi-rigid PVC.

8.3 Schluter

®

-KERDI-FIX

Any protrusions through the KERDI membrane can be treated with KERDI-FIX, or equivalent sealant, to ensure a fully waterproof assembly.

The inserts can withstand chemical stresses typically encountered in tiled environments.

Maintenance

SHOWERPROFILE-WS/-WSK support profiles require no special maintenance or care and are resistant to mold and fungi. In the case of anodized aluminum, do not use abrasive cleaning agents. The SHOWERPROFILE-WSC/

-WSL inserts are specifically treated to resist the growth of fungi and bacteria and require no special maintenance or care.

Application and Function

8.3 Schluter ® -KERDI-FIX is a singlecomponent, waterproof sealing and bonding compound with a silane-modified polymer base, which can be used in various applications. In conjunction with KERDI, KERDI-FIX can be used to waterproof pipe and valve protrusions in the

Schluter ® - Shower System. KERDI-FIX is used to bond the KERDI membrane to the stainless steel KERDI-DRAIN bonding flange. KERDI-FIX can also be used to bond KERDI to building elements such as bathtubs, window elements and door frames.

Maintenance

Storage

Unopened packages of KERDI-FIX can be stored in a cool location that is above freezing temperatures for up to 18 months.

Once the cartridge has been opened, the material has a limited shelf life.

System Installation

KERDI-FIX is odorless, weather- and UV-resistant.

The product is elastomeric, free of solvents, and provides a strong bond to most materials, including wood, stone, concrete, metal, glass, and many synthetic materials. KERDI-FIX can be painted over with most alkyd resins or dispersion paint types. The suitability of the material must

For complete installation guidelines and warranty criteria for shower applications, please contact Schluter ® -Systems at 800-

472-4588 (USA) or 800-667-8746 (Canada) to receive a copy of the Schluter ® -Shower

System Installation Handbook and a step-by-step installation video. To download a PDF version of the Handbook or to view the installation video online, please visit www.schluter.com.

7

Material Properties and

Areas of Application

S H O W E R S Y S T E M

Product Item Numbers

8.3 Schluter ® -KERDI-SHOWER-T Tray with center drain placement

Item No.

KST965/1525

KST1220/1525

KST1220/1830

KST1525

KST1830

Dimensions

97 cm x 152 cm (38" x 60")

122 cm x 152 cm (48" x 60")

122 cm x 183 cm (48" x 72")

152 cm x 152 cm (60" x 60")

183 cm x 183 cm (72" x 72")

Perimeter height

29 mm (1-1/8")

28 mm (1-3/32")

32 mm (1-1/4")

30 mm (1-3/16")

32 mm (1-1/4")

Drain placement center center center center center

8.3 Schluter ® -KERDI-SHOWER-TS Tray with off-center drain placement

Item No.

KST965/1525S

Dimensions

97 cm x 152 cm (38" x 60")

Perimeter height

29 mm (1-1/8")

Drain placement off-center

8.3 Schluter ® -KERDI-SHOWER-TT Thin tray

Item No.

KST965/810BF

KST915/1220BF

KST915BF

KST965BF

KST1220BF

KST965NA/BF

Dimensions

81 cm x 97 cm (32" x 38")

91 cm x 122 cm (36" x 48")

91 cm x 91 cm (36" x 36")

97 cm x 97 cm (38" x 38")

122 cm x 122 cm (48" x 48")

97 cm x 97 cm (38" x 38") Neo angle

Perimeter height

23 mm (29/32")

25 mm (1")

22 mm (7/8")

23 mm (29/32")

25 mm (1")

26 mm (1-1/32")

Drain placement center center center center center off-center

8.8 Schluter

®

-KERDI-SHOWER-LT Tray with center linear drain placement

Item No.

Dimensions Perimeter height Drain placement

KSLT1000

KSLT1220

KSLT1395

100 cm x 100 cm (39" x 39")

122 cm x 122 cm (48" x 48")

140 cm x 140 cm (55" x 55")

32 mm (1-1/4")

34 mm (1-3/8")

36 mm (1-7/16") center center center

8.8 Schluter

®

-KERDI-SHOWER-LTS Tray with perimeter linear drain placement

Item No.

KSLT1000S

KSLT1220S

KSLT1395S

KSLT915/1395S

KSLT915/1830S

KSLT965/1930S

KSLT1930/965S

Dimensions

100 cm x 100 cm (39" x 39")

122 cm x 122 cm (48" x 48")

140 cm x 140 cm (55" x 55")

91 cm x 140 cm (36" x 55")

91 cm x 183 cm (36" x 72")

97 cm x 193 cm (38" x 76")

193 cm x 97 cm (76" x 38")

Perimeter height

42 mm (1-21/32")

46 mm (1-13/16")

50 mm (2")

50 mm (2")

58 mm (2-5/16")

60 mm (2-3/8")

41 mm (1-5/8")

Drain placement perimeter perimeter perimeter perimeter perimeter perimeter perimeter

8.3 Schluter ® -KERDI-SHOWER-R Prefabricated ramp

Item No.

Width Length Height

KSR 305/1220 48" – 122 cm 12" – 30.5 cm 1-1/4" – 32 mm

12.1 Schluter ® -KERDI-BOARD-SC Prefabricated curb

Item No.

Width Length Height

KBSC 115 150 970

KBSC 115 150 1220

KBSC 115 150 1524

4-1/2" – 11.5 cm

4-1/2" – 11.5 cm

4-1/2" – 11.5 cm

38" – 97 cm

48" – 122 cm

60" – 152 cm

6" - 15 cm

6 " - 15 cm

6 " - 15 cm

12.1 Schluter ® -KERDI-BOARD-SB Prefabricated bench

Item No.

Width Length Height Shape

KBSB 410 TA

KBSB 610 TA

KBSB 290 970 RA

KBSB 410 1220 RA

16" – 41 cm

24" – 61 cm

38" – 97 cm

48" – 122 cm

16" – 41 cm

24" – 61 cm

11-1/2" – 29 cm

16" – 41 cm

20" - 51 cm

20" - 51 cm

20" - 51 cm

20" - 51 cm

Triangular

Triangular

Rectangular

Rectangular

8

S H O W E R S Y S T E M

W2

W1

H1 H2

8.1 Schluter

®

-KERDI Waterproofing membrane

Item No.

Roll width: 3' 3" – 1 m

KERDI 200/5M

KERDI 200/7M

KERDI 200/10M

KERDI 200/20M

KERDI 200

Roll width: 6' 7" – 2 m

KERDI 200200

KERDI200200/15M

Length

16' 5" – 5 m

23' – 7 m

33' – 10 m

65' 7" – 20 m

98' 5" – 30 m

98' 5" – 30 m

49' 2-1/2" – 15 m

Area

54 ft 2 – 5 m 2

75 ft 2 – 7 m 2

108 ft 2 – 10 m 2

215 ft 2 – 20 m 2

323 ft 2 – 30 m 2

646 ft 2 – 60 m²

323 ft 2 – 30 m 2

Thickness

8 mil

8 mil

8 mil

8 mil

8 mil

8 mil

8 mil

8.1 Schluter ® -KERDI-DS Waterproofing membrane

Item No.

KERDI-DS

Width

3' 3" – 1 m

Length

98' 5" – 30 m

Area

323 ft 2 – 30 m 2

Thickness

20 mil

12.1 Schluter ® -KERDI-BOARD Waterproof building panel

Item No.

KB 12 1220 812

KB 5 1220 1625

KB 9 1220 1625

KB 12 1220 1625

Width

48" – 122 cm

48" – 122 cm

48" – 122 cm

48" – 122 cm

Length

32" – 81 cm

64" – 162.5 cm

64" – 162.5 cm

64" – 162.5 cm

Thickness

1/2" – 12.5 mm

3/16" – 5 mm

3/8" – 9 mm

1/2" – 12.5 mm

KB 5 1220 2440

KB 9 1220 2440

KB 12 1220 2440

KB 15 1220 2440

KB 19 625 2440

KB 25 625 2440

KB 38 625 2440

KB 50 625 2440

KB 15 1220 3050

48" – 122 cm

48" – 122 cm

48" – 122 cm

48" – 122 cm

24-1/2" – 62.5 cm

24-1/2" – 62.5 cm

24-1/2" – 62.5 cm

24-1/2" – 62.5 cm

48" – 122 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

96" – 244 cm

120" – 305 cm

3/16" – 5 mm

3/8" – 9 mm

1/2" – 12.5 mm

5/8" – 15 mm

3/4" – 1 9 mm

1" – 25 mm

1-1/2" – 38 mm

2" – 50 mm

5/8" – 15 mm

12.1 Schluter ® -KERDI-BOARD-SN Prefabricated shower niche

Item No.

KB 12 SN 305 152 A

KB 12 SN 305 305 A

KB 12 SN 305 508 A1

KB 12 SN 305 711 A1

W1

12" – 305 mm

12" – 305 mm

12" – 305 mm

12" – 305 mm

H1

6" – 152 mm

12" – 305 mm

20" – 508 mm

28" – 711 mm

W2

16" – 406 mm

16" – 406 mm

16" – 406 mm

16" – 406 mm

H2

10" – 250 mm

16" – 406 mm

24" – 610 mm

32" – 810 mm

Depth

3-1/2" – 8.9 cm

3-1/2" – 8.9 cm

3-1/2" – 8.9 cm

3-1/2" – 8.9 cm

Shelf

1

1

-

-

10

S H O W E R S Y S T E M

1

6

2

6 KERDI-FIX

3

4 5

Schluter ® -KERDI-BOARD-KIT

1

Includes

KERDI-BOARD

Description

Waterproofing building panel 1/2" x 48" x 38" (1.25 cm x 122 cm x 97 cm) = 101 ft 2 (9.4 m²)

2 KERDI-BAND

3 KERDI-SEAL-PS

4

5

KERDI-SEAL-MV

KERDI-BOARD-ZT/-ZS

Waterproofing strip 5" x 98' 5" (125 mm x 30 m)

Pipe seal 1/2" (12.5 mm), 3/4" (20 mm)

Mixing valve seal 4-1/2" (114 mm)

Screws and washers

Sealant 9.8 fl oz (290 ml)

Quantity

8

1

2

1

140

2

8.1 Schluter

®

-KERDI-BAND Waterproofing strip

Item No.

KEBA 100/125/5M

KEBA 100/125/10M

KEBA 100/125

KEBA 100/125/300

Width

5" – 12.5 cm

5" – 12.5 cm

5" – 12.5 cm

5" – 12.5 cm

Length

16' 5" – 5 m

33' – 10 m

98' 5" – 30 m

984' 3" – 300 m

Thickness

4 mil

4 mil

4 mil

4 mil

KEBA 100/185/5M

KEBA 100/185

KEBA 100/250/5M

KEBA 100/250

7-1/4" – 18.5 cm

7-1/4" – 18.5 cm

10" – 25 cm

10" – 25 cm

16' 5" – 5 m

98' 5" – 30 m

16' 5" – 5 m

98' 5" – 30 m

4 mil

4 mil

4 mil

4 mil

8.1 Schluter ® -KERDI-FLEX Waterproofing strip for use above movement joints

Item No.

Width Length Thickness

FLEX 125/5M 12 mil

FLEX 250/5M

FLEX 125/30

FLEX 250/30

5" – 12.5 cm

10" – 25 cm

5" – 12.5 cm

10" – 25 cm

16' 5" – 5 m

16' 5" – 5 m

98' 5" – 30 m

98' 5" – 30 m

12 mil

12 mil

12 mil

8.1 Schluter

®

-KERDI-KERECK-F Preformed corner

Item No.

KERECK/FI 2

KERECK/FI 10

KERECK/FA 2

KERECK/FA 10

Thickness

4 mil

4 mil

4 mil

4 mil

Packaging

2 inside corners

10 inside corners

2 outside corners

10 outside corners

8.1 Schluter ® -KERDI-KERS-B Preformed corner

Item No.

Thickness Description Packaging

KERECK 135 FI 2

KERECK 135 FI 10

KERSB 135 K LR

KERSB 135 K 5LR

KERSB 135 K

4 mil

4 mil

4 mil

4 mil

4 mil

Inside corner, 135°

Inside corner, 135°

Bench corners

Bench corners

Bench/ neo-angle corner kit

2 units

10 units

1 right and 1 left

5 right and 5 left

1 right and 1 left bench corner, and

2 135° inside corners

8.3 Schluter

®

-KERDI-FIX Adhesive/sealant

Item No.

KERDIFIX / color*

KERDIFIX 100 G

Description

Cartridge - 9.81 fl oz — 290 ml

Tube - 3.38 fl oz — 100 ml

*

Color Codes

BW

Bright white

G

Grey

To complete the item number, add the color code (e.g., KERDIFIX/ BW ).

S H O W E R S Y S T E M

8.1 Schluter ® -KERDI-KERS Preformed corner

KERS 20L

KERS 28L

KERS 20R

KERS 28R

Item No.

Thickness

4 mil

4 mil

4 mil

4 mil

Packaging

Left inside corner – 3/4" (20 mm)

Left inside corner – 1-3/32" (28 mm)

Right inside corner – 3/4" (20 mm)

Right inside corner – 1-3/32" (28 mm)

8.1 Schluter ® -KERDI-SEAL-PS Pipe seal with over-molded rubber gasket

Item No.

Pipe nipple opening diam.

Thickness Packaging

KMS185/12

KMS185/20

1/2" – 12.5 cm

3/4" – 20 cm

4 mil

4 mil

1 unit

1 unit

KMS10185/12

KMS10185/20

1/2" – 12.5 cm

3/4" – 20 cm

4 mil

4 mil

10 units

10 units

8.1 Schluter ® -KERDI-SEAL-MV Mixing valve seal with over-molded rubber gasket

Item No.

Mixing valve opening diam.

Thickness Packaging

KMSMV235/114

KMSMV10235/114

4-1/2" – 114 cm

4-1/2" – 114 cm

4 mil

4 mil

1 unit

10 units

8.1 Schluter ® -KERDI-KM Pipe seal

Item No.

Dimensions Thickness Packaging

KM5117/22 7" x 7" – 17 x 17 cm 4 mil 5 units

Hole diameter, ø = 7/8" - 22 mm

14.2 Schluter ® -SHOWERPROFILE-WS Support profile

Item No.

Height Length

SPWS 19 AE/100

SPWS 19 AE

5/16" - 8 mm

5/16" - 8 mm

39" - 1 m

8' 2-1/2" - 2.5 m

14.2 Schluter ® -SHOWERPROFILE-WSK Support profile - retrofit

Item No.

Height Length

SPWSK 52 AE/100

SPWSK 52 AE

5/16" - 8 mm

5/16" - 8 mm

39" - 1 m

8' 2-1/2" - 2.5 m

14.2 Schluter ® -SHOWERPROFILE-WSC Semi-circular lip insert

Item No.

Height Length

SPWSC 16 GS/100

SPWSC 16 GS

5/16" - 8 mm

5/16" - 8 mm

39" - 1 m

8' 2-1/2" - 2.5 m

14.2 Schluter

®

-SHOWERPROFILE-WSL Straight lip insert

Item No.

SPWSL 30 T/100

SPWSL 30 T

Height

5/16" - 8 mm

5/16" - 8 mm

Length

39" - 1 m

8' 2-1/2" - 2.5 m

14.2 Schluter

®

-SHOWERPROFILE-WSK-EK End cap

Item No.

Height

EK/SPWSK 52 AE 5/16" - 8 mm

Schluter ® -KERDI-TROWEL Trowel

Item No.

Notch Size Packaging

TRL-KER6 1/8" x 1/8" - 3 x 3 mm 6 units

TRL-KER 1/8" x 1/8" - 3 x 3 mm 1 unit

S H O W E R S Y S T E M

8.2 Schluter ® -KERDI-DRAIN

4" Grate Options

Tileable Covering Support Anodized Aluminum

Available in the following colors and finishes:

Brushed

Nickel

(ATGB)

TILE (ECS)

Patent pending

Stainless Steel

CONTOUR

Available in the following colors and finishes:

Brushed

Copper

(AKGB)

Brushed

Brass

(AMGB)

Available in the following colors and finishes:

Stainless

Steel

(E)

Rose Gold

(ERG)

PURE

Brushed

Stainless Steel

(EB)

Brushed

Classic Gold

(EBCG)

Stone Grey

(TSSG)

CLASSIC

Chrome

(EP)

Vintage Gold

(EVG)

Brushed

Nickel

(EBT)

Cream

(TSC)

Matte Black

(MGS)

Oil-rubbed

Bronze

(EOB)

Classic Gold

(ECG)

CURVE Brushed

Rose Gold

(EBRG)

Greige

(TSBG)

Matte White

(MBW)

Nickel

(ET)

FLORAL

Brushed

Vintage Gold

(EBVG)

Bronze

(TSOB)

6" Grate Options

Stainless Steel Stainless Steel Cover for Cleanout Applications

Flange Options

ABS - 2" or 3" Outlet

CLASSIC

(6E)

PVC - 2" or 3" Outlet

CLASSIC

ROUND

(6RE) (6CE)

Stainless Steel - 2" or 3"

No-hub Outlet

Stainless Steel - 2"

Threaded Outlet

Note: Product listings and certifications can be referenced on page 37.

12

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

ABS or PVC FLANGE — 2" or 3" OUTLET

2"

(50 mm)

drain outlet

Material Item No.

KD2 FLK ABS

ABS

KD2 FLK PVC

PVC

Additional components included

4x

Inside corners

2x

Outside corners

3"

(75 mm)

drain outlet

Material

1x

Pipe seal

(3/4" - 20 mm )

ABS

PVC

Flange measurements

ABS or PVC

D

E

F

G

A

B

C

2" (50 mm) drain outlet

11-13/16" - 300 mm

4-17/32" - 115.2 mm

2-45/64" - 68.6 mm

2-3/8" - 60.5 mm

3-15/16" - 100 mm

1-39/64" - 40.6 mm

7/8" - 22.5 mm i

When using a flange with 3" outlet, a 6" grate is recommended.

Item No.

KD3 FLK ABS

KD3 FLK PVC

1x

Mixing valve seal

(4-1/2" - 114 mm )

3" (75 mm) drain outlet

11-13/16" - 300 mm

4-17/32" - 115.2 mm

3-15/16" - 100 mm

3-1/2" - 88.8 mm

3-15/16" - 100 mm

2" - 50.8 mm

1-1/2" - 38.1 mm

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

STAINLESS STEEL FLANGE — 2" or 3" OUTLET

2"

(50 mm)

drain outlet

Material Item No.

3"

(75 mm)

drain outlet

Material

KD2 FLK E

No-hub

KD2 FLK ETH

Threaded

Additional components included

4x

Inside corners

2x

Outside corners

1x

Pipe seal

(3/4" - 20 mm )

1x

No-hub

Mixing valve seal

(4-1/2" - 114 mm )

Item No.

KD3 FLK E

1x

KERDI-FIX sealing and bonding compound

(3.38 fl oz – 100 ml )

Flange measurements

Stainless steel

D

E

F

A

B

C

2" (50 mm) no-hub outlet

9-27/32" - 250 mm

4-1/2" - 115.4 mm

2-13/32" - 61.3 mm

2-13/32" - 60.6 mm

3-11/32" - 85 mm

53/64" - 21 mm

3" (75 mm) no-hub outlet

9-27/32" - 250 mm

4-1/2" - 114 mm

3-7/16" - 87.4 mm

3-5/16" - 84.2 mm

3-7/16" - 87.4 mm

1-5/32" - 29.4 mm i

When using a flange with 3" outlet, a 6" grate is recommended.

14

B B

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN-H

ABS or PVC FLANGE — 2" OUTLET HORIZONTAL

2"

(50 mm)

drain outlet

Material Item No.

KDH2 FLK ABS

ABS

KDH2 FLK PVC

PVC

Additional components included

4x

Inside corners

2x

Outside corners

1x

Pipe seal

(3/4" - 20 mm )

1x

Mixing valve seal

(4-1/2" - 114 mm )

Flange measurements

ABS or PVC

A

B

D C

F

E

A

B

C

D

E

F

2" (50 mm) horizontal drain outlet

11-13/16" - 300 mm

4-21/32" - 118.3 mm

2-47/64" - 69.5 mm

2-3/8" - 60.5 mm

3-3/8" - 85.7 mm

1-1/16" - 27 mm

Schluter

®

-KERDI-SHOWER-CB

Schluter

®

-KERDI-SHOWER-CB is a height compensation board made of lightweight expanded polystyrene used to accommodate the drain body and waste pipe height, when installing the Schluter

®

-

KERDI-DRAIN-H in conjunction with the

Schluter

®

-KERDI-SHOWER -T/TS/TT shower trays. The compensation board can easily be cut to size to fit around the drain and waste pipe, and multiple boards can be used to fit the size and shape of the shower.

61 cm -

24"

8.9 cm -

3-1/2"

Schluter ®

Item No.

KSCB 90 610 1220

122 cm - 48"

122 cm - 48"

-KERDI-SHOWER-CB

Compensation board

Dimensions

122 cm x 61 cm x 8.9 cm (48" x 24" x 3-1/2")

15

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN-A

ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING

Schluter

®

-KERDI-DRAIN adaptor kits are designed to convert clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g., when they are set in concrete slabs). The adaptor kit includes a stainless steel adaptor ring, available in 5-1/4"

(133 mm)

and 7-1/2"

(191 mm)

diameter sizes, with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring drains.

5-1/4"

(133.4 mm)

adaptor ring

Flange and ring Item No.

7-1/2"

(191 mm)

adaptor ring

Flange and ring Item No.

KDA5 FLK ABS

5-1/4"

Also included:

Height adjustment collar for KERDI-

DRAIN grate

Additional components included

4x

Inside corners

2x

Outside corners

1x

Pipe seal

(3/4" - 20 mm )

7-1/2"

Also included:

Lateral adjustment ring for KERDI-

DRAIN grate

KDA7 FLK ABS

1x

Mixing valve seal

(4-1/2" - 114 mm )

1x

KERDI-FIX sealing and bonding compound

(3.38 fl oz – 100 ml )

Flange and adaptor ring measurements

ABS

5-1/4"

A 11-13/16" - 300 mm

B 2-13/32" - 60.7 mm

C 2-23/32" - 69.3 mm

D 5-1/4" - 133.4 mm

E 2-29/32" - 74 mm

F 1-1/64" - 25.9 mm

G 2-1/16" - 52.6 mm i

The tileable grate and the 6" round/square grates are NOT compatible with the

5-1/4" ring flange.

Flange and adaptor ring measurements

ABS

7-1/2"

A 11-13/16" - 300 mm

B 4-13/32" - 111.8 mm

C 4-11/16" - 118.9 mm

D 7-1/2" - 191 mm

E 5-7/64" - 130 mm

F 3-1/16" - 77.8 mm

G 3-41/64" - 92.4 mm

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

GRATES FOR USE WITH FLANGES WITH 2" OUTLET

4" ( 100 mm ) Grate

Schluter

®

-KERDI-DRAIN-STYLE

PURE

U.S. Patent No. D831,795

Brushed stainless steel

Item No.

KDIF4 GRK EB D8

Brushed nickel

Item No.

KDIF4 GRK EBT D8

Brushed rose gold

Item No.

KDIF4 GRK EBRG D8

Brushed vintage gold

Item No.

KDIF4 GRK EBVG D8

Brushed classic gold

Item No.

KDIF4 GRK EBCG D8

Cream

Item No.

KDIF4 GRK TSC D8

Greige

Item No.

KDIF4 GRK TSBG D8

Stone grey

Item No.

KDIF4 GRK TSSG D8

Bronze

Item No.

KDIF4 GRK TSOB D8

Matte white

Item No.

KDIF4 GRK MBW D8

Matte black

Item No.

KDIF4 GRK MGS D8

CURVE

U.S. Patent No. D831,171

Brushed stainless steel

Item No.

KDIF4 GRK EB D6

Brushed nickel

Item No.

KDIF4 GRK EBT D6

Brushed rose gold

Item No.

KDIF4 GRK EBRG D6

Brushed vintage gold

Item No.

KDIF4 GRK EBVG D6

Brushed classic gold

Item No.

KDIF4 GRK EBCG D6

Cream

Item No.

KDIF4 GRK TSC D6

Greige

Item No.

KDIF4 GRK TSBG D6

Stone grey

Item No.

KDIF4 GRK TSSG D6

Bronze

Item No.

KDIF4 GRK TSOB D6

Matte white

Item No.

KDIF4 GRK MBW D6

Matte black

Item No.

KDIF4 GRK MGS D6

FLORAL

U.S. Patent No. D831,172

Brushed stainless steel

Item No.

KDIF4 GRK EBD5

Brushed nickel

Item No.

KDIF4 GRK EBT D5

Brushed rose gold

Item No.

KDIF4 GRK EBRG D5

Brushed vintage gold

Item No.

KDIF4 GRK EBVG D5

Brushed classic gold

Item No.

KDIF4 GRK EBCG D5

17

Cream

Item No.

KDIF4 GRK TSC D5

Greige

Item No.

KDIF4 GRK TSBG D5

Stone grey

Item No.

KDIF4 GRK TSSG D5

Bronze

Item No.

KDIF4 GRK TSOB D5

Matte white

Item No.

KDIF4 GRK MBW D5

Matte black

Item No.

KDIF4 GRK MGS D5

S H O W E R S Y S T E M

Stainless steel - CLASSIC

Stainless steel

Item No.

KD4 GRK E

Chrome

Item No.

KD4 GRK EP

Oil-rubbed bronze

Item No.

KD4 GRK EOB

Nickel

Item No.

KD4 GRK ET

Anodized aluminum - CONTOUR

Rose gold

Item No.

KD4 GRK ERG

Vintage gold

Item No.

KD4 GRK EVG

Classic gold

Item No.

KD4 GRK ECG

18

Brushed nickel anodized aluminum

Item No.

KD4 GRK ATGB

Brushed copper anodized aluminum

Item No.

KD4 GRK AKGB

Brushed brass anodized aluminum

Item No.

KD4 GRK AMGB

Contents

1x

Grate and frame

1x

Height adjustment collar

1x

Lateral adjustment ring

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

GRATES FOR USE WITH FLANGES WITH 2" OUTLET

4" ( 100 mm ) Grate

TILE

Tileable covering support

Item No.

KD4 GRK ECS

Patent pending

Contents

1x

Tileable covering support

1x

Spacer

GRATES FOR USE WITH FLANGES WITH 2" or 3" OUTLET

6" ( 150 mm ) Grate

Stainless steel - CLASSIC

1x

Lateral adjustment ring

19

Stainless steel - 6" square

Item No.

KD6 GRK E

Contents

1x

Grate and frame with integrated height adjustment collar

Stainless steel - 6" round

Item No.

KD6 GRK RE

1x

Lateral adjustment ring

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

DRAIN KITS — ABS or PVC FLANGE - 2" OUTLET - STAINLESS STEEL GRATE

Schluter

®

-KERDI-DRAIN

PVC - 2" (50 mm) ABS - 2" (50 mm)

4"

(100 mm)

square grate

Stainless steel KD2/ABS/E KD2/PVC/E

Contents

1x

Flange

4x

Inside corners

1x

Grate and frame

2x

Outside corners

1x

Height adjustment collar

1x

Pipe seal

(3/4" - 20 mm )

1x

Lateral adjustment ring

1x

Mixing valve seal

(4-1/2" - 114 mm )

ADAPTOR KIT — 5-1/4" ADAPTOR RING - 4" STAINLESS STEEL GRATE

5-1/4"

(133.4 mm)

adaptor ring

ABS

4"

(100 mm)

square grate

Stainless steel KDAR/ABS/E

Contents

1x

Flange

4x

Inside corners

1x

Grate and

frame

2x

Outside corners

1x

Height adjustment collar

1x

Pipe seal

(3/4" - 20 mm )

1x

KERDI-FIX sealing and bonding compound

(3.38 fl oz – 100 ml )

1x

Adaptor ring

1x

Mixing valve seal

(4-1/2" - 114 mm )

20

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

ABS or PVC FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS

2"

(50 mm)

drain outlet 3"

(75 mm)

drain outlet

Material

Material

1 Unit

Item No.

10 Units

Item No.

Item No.

KD3/ABS/FL

KD2/ABS/FL KD2/ABS/FL10 ABS

ABS

KD3/PVC/FL

KD2/PVC/FL KD2/PVC/FL10

PVC

PVC

ABS or PVC HORIZONTAL

2"

(50 mm)

drain outlet

Material Item No.

FLANGE — 2" OUTLET - WITHOUT SEALS AND CORNERS

KDH2/ABS/FL

ABS

KDH2/PVC/FL

PVC

STAINLESS STEEL FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS

2"

(50 mm)

drain outlet

Material

1 Unit

Item No.

10 Units

Item No.

3"

(75 mm)

drain outlet

Material Item No.

KD3/E/FL

KD2/E/FL KD2/E/FL10

No-hub

No-hub

Threaded

KD2/ETH/FL -

Also included with stainless steel flanges

1x

KERDI-FIX sealing and bonding compound

(3.38 fl oz – 100 ml )

Note: Not included with 10-pack i

When using a flange with 3" outlet, a 6" grate is recommended.

21

S H O W E R S Y S T E M

Schluter ® -KERDI-DRAIN

10 PACKS — ABS OR PVC FLANGE - 2" OUTLET

2"

(50 mm)

drain outlet

Material Item No.

Additional components included

40x

Inside corners

KD2 FLK ABS 10

ABS

10x

Pipe seal

(3/4" - 20 mm )

PVC

Note: 10 packs are packaged in bulk, not individually boxed.

KD2 FLK PVC 10

10 PACKS — ABS FLANGE - 5-1/4" ADAPTOR RING

5-1/4"

(133.4 mm)

adaptor ring

Flange and ring Item No.

Additional components included

40x

Inside corners

KDA5 FLK ABS 10

10x

Pipe seal

(3/4" - 20 mm )

5-1/4"

10x

KERDI-FIX sealing and bonding compound

(3.38 fl oz – 100 ml )

Also included: Height adjustment collar for KERDI-DRAIN grate

Note: 10 packs are packaged in bulk, not individually boxed.

i

The tileable grate and the 6" round/square grates are NOT compatible with the

5-1/4" ring flange.

10 PACKS — 4" GRATE - STAINLESS STEEL

Stainless steel - CLASSIC

Contents

10x

Grate and frame

Stainless steel

Item No.

KD4 GRK E 10

Note: 10 packs are packaged in bulk, not individually boxed.

22

10x

Lateral adjustment ring

20x

Outside corners

10x

Mixing valve seal

(4-1/2" - 114 mm )

20x

Outside corners

10x

Mixing valve seal

(4-1/2" - 114 mm )

10x

Height adjustment collar

Schluter ® -KERDI-DRAIN

6" SQUARE CLEAN OUT COVER

The Schluter

®

-KERDI-DRAIN Clean

Out Cover is a 6” stainless steel cover available for installations where the KERDI-

DRAIN bonding flange is to be used in a cleanout application.

Clean out cover 6"

Item No.

KD-GR6C-E

TAMPER PROOF SCREWS

Schluter

®

-KERDI-DRAIN Tamper

Proof Screws are designed as a high security accessory for the KERDI-DRAIN.

Ideal for loss prevention and anti-theft, these tamper proof screws are used in environments where tamper resistance is desired or required (e.g., healthcare or education facilities, etc.). Phillips head screws are included with the KERDI-

DRAIN. The tamper-proof screws as well as the driver bit must be purchased separately.

Tamper proof screw and driver bit

Item No.

KD/TPSCRW

KD/TPWRCH

STRAINER

The Schluter

®

-KERDI-DRAIN Strainer is a hair catcher customized to fit inside the KERDI-DRAIN flange to trap and collect hair. Simple to remove and clean, the hair catcher fits discreetly into the drain to prevent hair clogs that can lead to blocked pipes.

Note: The KERDI-DRAIN strainer is only suitable for use with flanges with 2"

(50 mm)

vertical outlets (ABS, PVC, and stainless steel with no-hub or threaded outlet).

Strainer for KERDI-DRAIN

Item No.

KD-STR

23

Finish

Stainless steel

Description

Tamper proof screw

Driver bit

Description

Strainer

S H O W E R S Y S T E M

S H O W E R S Y S T E M

Note: There are multiple selections to be made for this product. Begin by selecting the appropriate channel body length then proceed to grate selection accordingly, keeping in mind there two frame height options for the SOLID (A) and SQUARE

(B) grates.

Schluter ® -KERDI-LINE

CHANNEL BODY

Contents

Channel body center outlet

= L

= L

1

Channel body off-set outlet

8" - 20.3 cm

= L

= L

1

1x

Channel body

1x

Channel support

1x

No-hub coupling

Schluter

®

-KERDI-LINE

Channel body - stainless steel - center outlet

L = in. - cm

19-11/16 - 50

23-5/8 - 60

27-9/16 - 70

31-1/2 - 80

35-7/16 - 90

39-3/8 - 100

43-5/16 - 110

47-1/4 - 120

51-3/16 - 130

55-1/8 - 140

59-1/16 - 150

62-15/16 - 160

66-7/8 - 170

70-13/16 - 180

21-11/16 - 55

25-5/8 - 65

29-9/16 - 75

33-1/2 - 85

37-7/16 - 95

41-3/8 - 105

45-5/16 - 115

49-1/4 - 125

53-3/16 - 135

57-1/8 - 145

61-1/16 - 155

64-15/16 - 165

68-7/8 - 175

72-13/16 - 185

Channel body - stainless steel - off-set outlet

L = in. - cm

27-9/16 - 70

31-1/2 - 80

35-7/16 - 90

39-3/8 - 100

43-5/16 - 110

47-1/4 - 120

29-9/16 -

33-1/2 -

37-7/16 -

41-3/8 -

45-5/16 -

49-1/4 -

75

85

95

105

115

125

4x

Inside corners

1x

Pipe seal

(3/4" - 20 mm )

Item No.

KL1V 60 E 50

KL1V 60 E 60

KL1V 60 E 70

KL1V 60 E 80

KL1V 60 E 90

KL1V 60 E 100

KL1V 60 E 110

KL1V 60 E 120

KL1V 60 E 130

KL1V 60 E 140

KL1V 60 E 150

KL1V 60 E 160

KL1V 60 E 170

KL1V 60 E 180

Item No.

KL1VO 60 E 70

KL1VO 60 E 80

KL1VO 60 E 90

KL1VO 60 E 100

KL1VO 60 E 110

KL1VO 60 E 120

2x

Outside corners

1x

Mixing valve seal

(4-1/2" - 114 mm )

24

Schluter ® -KERDI-LINE

GRATE ASSEMBLY - BRUSHED STAINLESS STEEL

CONTENTS

1x

Grate

6 design options:

• SOLID

• SQUARE

• TILE

• CURVE

• FLORAL

• PURE

S H O W E R S Y S T E M

1x

Grate frame with height adjustment spacers.

See product tables for frame height options

(not included with

TILE grate).

SOLID (A)

3/8"

10 mm

1-27/32"

47 mm

SQUARE (B)

3/8" -

10 mm

2-1/8" - 54 mm

=H

2-29/32" - 74 mm

2-29/32" - 74 mm

Grate assemblies - Brushed stainless steel

3/4" ( 19 mm) frame height for

1/8" to 9/16" ( 3 mm to 15 mm) thick coverings

SOLID (A) SQUARE (B)

Length = in. - cm

19-11/16 - 50

23-5/8 - 60

27-9/16 -

47-1/4 -

66-7/8 -

70-13/16 -

19-11/16 -

23-5/8 -

27-9/16 -

31-1/2 -

35-7/16 -

39-3/8 -

43-5/16 -

47-1/4 -

70

31-1/2 - 80

35-7/16 - 90

39-3/8 - 100

43-5/16 - 110

120

51-3/16 - 130

55-1/8 - 140

59-1/16 - 150

62-15/16 - 160

170

180

50

60

70

80

90

100

110

120

Item No.

Item No.

KL1AR 19 EB 50

KL1AR 19 EB 60

KL1AR 19 EB 70

KL1AR 19 EB 80

KL1AR 19 EB 90

KL1AR 19 EB 100

KL1AR 19 EB 110

KL1AR 19 EB 120

KL1B 19 EB 50

KL1B 19 EB 60

KL1B 19 EB 70

KL1B 19 EB 80

KL1B 19 EB 90

KL1B 19 EB 100

KL1B 19 EB 110

KL1B 19 EB 120

KL1AR 19 EB 130

KL1AR 19 EB 140

KL1AR 19 EB 150

KL1AR 19 EB 160

KL1AR 19 EB 170

KL1B 19 EB 130

KL1B 19 EB 140

KL1B 19 EB 150

KL1B 19 EB 160

KL1B 19 EB 170

KL1AR 19 EB 180 KL1B 19 EB 180

1-1/8" ( 30 mm) frame height for

1/2" to 1" - ( 13 mm to 25 mm) thick coverings

KL1AR 30 EB 50

KL1AR 30 EB 60

KL1AR 30 EB 70

KL1AR 30 EB 80

KL1AR 30 EB 90

KL1AR 30 EB 100

KL1AR 30 EB 110

KL1AR 30 EB 120

KL1B 30 EB 50

KL1B 30 EB 60

KL1B 30 EB 70

KL1B 30 EB 80

KL1B 30 EB 90

KL1B 30 EB 100

KL1B 30 EB 110

KL1B 30 EB 120

25

= H

Schluter ® -KERDI-LINE

GRATE ASSEMBLY - CHROME

SOLID (A)

3/8"

10 mm

1-27/32"

47 mm

SQUARE (B)

3/8" -

10 mm

2-1/8" - 54 mm

=H

Grate assemblies - Chrome

2-29/32" - 74 mm

3/4" ( 19 mm) frame height for

1/8" to 9/16" ( 3 mm to 15 mm) thick coverings

2-29/32" - 74 mm

= H

Length = in. - cm

19-11/16 - 50

23-5/8 - 60

27-9/16 - 70

31-1/2 - 80

35-7/16 - 90

39-3/8 - 100

43-5/16 - 110

47-1/4 - 120

SOLID (A)

Item No.

KL1AR 19 EP 50

KL1AR 19 EP 60

KL1AR 19 EP 70

KL1AR 19 EP 80

KL1AR 19 EP 90

KL1AR 19 EP 100

KL1AR 19 EP 110

KL1AR 19 EP 120

SQUARE (B)

Item No.

KL1B 19 EP 50

KL1B 19 EP 60

KL1B 19 EP 70

KL1B 19 EP 80

KL1B 19 EP 90

KL1B 19 EP 100

KL1B 19 EP 110

KL1B 19 EP 120

GRATE ASSEMBLY - FRAMELESS TILEABLE

TILE (D) 2" - 50 mm

Grate assemblies - Frameless tileable

Length = in. - cm

19-11/16 -

23-5/8 -

27-9/16 -

31-1/2 -

35-7/16 -

39-3/8 -

43-5/16 -

47-1/4 -

51-3/16 -

55-1/8 -

59-1/16 -

62-15/16 -

66-7/8 -

70-13/16 -

26

50

60

70

80

90

100

110

120

130

140

150

160

170

180

For use with center outlet channel body

KL1DRE 50

KL1DRE 60

KL1DRE 70

KL1DRE 80

KL1DRE 90

KL1DRE 100

KL1DRE 110

KL1DRE 120

KL1DRE 130

KL1DRE 140

KL1DRE 150

KL1DRE 160

KL1DRE 170

KL1DRE 180

Item No.

TILE (D)

For use with off-set outlet channel body

-

-

KL1DRO E 70

KL1DRO E 80

KL1DRO E 90

KL1DRO E 100

KL1DRO E 110

KL1DRO E 120

-

-

-

-

-

-

S H O W E R S Y S T E M

GRATE ASSEMBLY - MATTE BLACK

SOLID (A)

3/8"

10 mm

1-27/32"

47 mm

SQUARE (B)

3/8" -

10 mm

2-1/8" - 54 mm

=H

2-29/32" - 74 mm

Grate assemblies - Matte black

Length = cm - in.

50 - 19-11/16

60 - 23-5/8

70 - 27-9/16

80 - 31-1/2

90 - 35-7/16

100 - 39-3/8

110 43-5/16

120 - 47-1/4

2-29/32" - 74 mm

3/4" ( 19 mm) frame height for

1/8" to 9/16" ( 3 mm to 15 mm) thick covering

SOLID (A) SQUARE (B)

Item No.

KL1AR19MGS50

KL1AR19MGS60

KL1AR19MGS70

KL1AR19MGS80

KL1AR19MGS90

KL1AR19MGS100

KL1AR19MGS110

KL1AR19MGS120

Item No.

KL1B19MGS50

KL1B19MGS60

KL1B19MGS70

KL1B19MGS80

KL1B19MGS90

KL1B19MGS100

KL1B19MGS110

KL1B19MGS120

= H

S H O W E R S Y S T E M

27

S H O W E R S Y S T E M

Schluter ® -KERDI-LINE-STYLE

GRATE ASSEMBLY - BRUSHED STAINLESS STEEL STYLE DESIGNS

CURVE

2-29/32" (74 mm)

4

=H

2-1/8" (54 mm)

FLORAL

2-29/32" (74 mm)

4

=H

2-1/8" (54 mm)

PURE

2-29/32" (74 mm)

2-1/8" (54 mm)

Grate assemblies - Brushed stainless steel

29/32" - 23 mm frame height for 1/4" - 11/16" (6 - 18 mm) -thick coverings

Length = in. - cm

CURVE 1

Item No.

19-11/16 - 50

23-5/8 - 60

27-9/16 - 70

31-1/2 - 80

35-7/16 - 90

39-3/8 - 100

43-5/16 - 110

47-1/4 - 120

KL1IFF 23 EB 50

KL1IFF 23 EB 60

KL1IFF 23 EB 70

KL1IFF 23 EB 80

KL1IFF 23 EB 90

KL1IFF 23 EB 100

KL1IFF 23 EB 110

KL1IFF 23 EB 120

1.

U.S. Patent No. D831,168 2.

U.S. Patent No. D831,170 3.

U.S. Patent No. D831,169

FLORAL 2

Item No.

KL1IFE 23 EB 50

KL1IFE 23 EB 60

KL1IFE 23 EB 70

KL1IFE 23 EB 80

KL1IFE 23 EB 90

KL1IFE 23 EB 100

KL1IFE 23 EB 110

KL1IFE 23 EB 120

PURE 3

Item No.

KL1IFG 23 EB 50

KL1IFG 23 EB 60

KL1IFG 23 EB 70

KL1IFG 23 EB 80

KL1IFG 23 EB 90

KL1IFG 23 EB 100

KL1IFG 23 EB 110

KL1IFG 23 EB 120

28

S H O W E R S Y S T E M

Schluter ® -KERDI-LINE

PERFORATED GRATE WITH LOCKING MECHANISM

The Schluter

®

-KERDI-LINE SQUARE grate assembly (B) with 3/4" (

19 mm

) frame height is available with a locking mechanism for applications where tamper resistance is required.

SQUARE grate assembly with locking mechanism

Length = in. - cm

19-11/16 -

23-5/8 -

27-9/16 -

31-1/2 -

35-7/16 -

39-3/8 -

43-5/16 -

47-1/4 -

51-3/16 -

55-1/8 -

59-1/16 -

62-15/16 -

66-7/8 -

70-13/16 -

50

60

70

80

90

100

110

120

130

140

150

160

170

180

Item No.

KL1BL 19 EB 50

KL1BL 19 EB 60

KL1BL 19 EB 70

KL1BL 19 EB 80

KL1BL 19 EB 90

KL1BL 19 EB 100

KL1BL 19 EB 110

KL1BL 19 EB 120

KL1BL 19 EB 130

KL1BL 19 EB 140

KL1BL 19 EB 150

KL1BL 19 EB 160

KL1BL 19 EB 170

KL1BL 19 EB 180

Note: Driver bit for tamper-proof screws sold separately. Please see page 23.

COVER PLATE

Schluter ® -KERDI-LINE-FC

Schluter

®

-KERDI-LINE-FC is a stainless steel cover plate for use with the Schluter

®

-

KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end.

KERDI-LINE-FC is designed for use with either the SOLID or SQUARE grates.

3/8'' - 1/2'' (10 - 12.5 mm) 1-3/8'' - 35 mm

Schluter ® -KERDI-LINE-FC Cover Plate

Brushed stainless steel Chrome

Item No.

V / KLEB 35

Item No.

V / KLEP 35

Matte black

Item No.

V / KLMGS 35

STRAINER

The Schluter

®

-KERDI-LINE Strainer is a hair catcher customized to fit inside the

KERDI-LINE channel body to trap and collect hair. Simple to remove and clean, the hair catcher fits discreetly into the drain to prevent hair clogs that can lead to blocked pipes.

Strainer for KERDI-LINE

Item No.

KL VZ SF

29

Description

Strainer

S H O W E R S Y S T E M

14.1 Schluter

®

-SHOWERPROFILE-SA Two-part tapered edging profile

Item No.

H = in. - mm H1 = in. - mm H2 = in. - mm

L = 47-1/4" - 1.2 m

SPSA 50 EB/120

L = 63" - 1.6 m

3/16 - 5 1/4 - 6 1-3/16 - 30

SPSA 50 EB/160

L = 78-3/4" - 2 m

SPSA 50 EB/200

3/16 - 5

3/16 - 5

1/4 - 6

1/4 - 6

1-1/2 - 38

1-13/16 - 46

H = 3/16" (5 mm) or

3/8" (10 mm)

3/8"

(10 mm)

H = 3/16" (5 mm) or

3/8" (10 mm)

3/8"

(10 mm)

14.1 Schluter

®

Item No.

-SHOWERPROFILE-SB

H = in. - mm H1 = in. - mm

Two-part tapered edging profile

L = 47-1/4" - 1.2 m

H2 = in. - mm

H = 1/2"

(12.5 mm)

SPSB 100 EB/120

SPSB 125 EB/120

L = 63" - 1.6 m

SPSB 100 EB/160

SPSB 125 EB/160

L = 78-3/4" - 2 m

SPSB 100 EB/200

SPSB 125 EB/200

3/8 - 10

1/2 - 12.5

3/8 - 10

1/2 - 12.5

3/8 - 10

1/2 - 12.5

3/8 - 10

3/8 - 10

3/8 - 10

3/8 - 10

3/8 - 10

3/8 - 10

1-11/32 - 34

1-11/32 - 34

1-21/32 - 42

1-21/32 - 42

2 - 50

2 - 50

Note: Other sizes available. Contact Customer Service for price and availability.

2%

= H

2

= H

1

= L

25/32" (20 mm)

= H

14.1 Schluter ® -SHOWERPROFILE-R Two-part wall transition profile

Item No.

Height

L = 39" - 1 m

SPRA 23 EB/100

SPRA 33 EB/100

29/32" - 1-3/8" (23 - 35 mm)

1-5/16" - 1-25/32" (33 - 45 mm)

L = 55" - 1.4 m

SPRA 23 EB/140

SPRA 33 EB/140

29/32" - 1-3/8" (23 - 35 mm)

1-5/16" - 1-25/32" (33 - 45 mm)

7/8" (22mm) /

1-1/4" (32 mm)

H = variable

Note: When the SHOWERPROFILE-S/-R is not used with the Schluter ® -Shower System the profile is covered under the Schluter ® -Systems Wall and Countertop Profiles

5-Year Limited Warranty.

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-E Triangular corner shelf

210 mm - 8-1/4 "

210 mm - 8-1/4 "

MBW MBW

EB

Schluter ® -SHELF-E - FLORAL

Item No.

Finish

SES1 D5 EB

SES1 D5 MBW

SES1 D5 MGS

SES1 D5 TSBG

SES1 D5 TSC

SES1 D5 TSOB

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

SES1 D5 TSSG Stone grey

210 mm - 8-1/4 "

MGS

TSBG

TSC

TSOB

TSSG

EB

Schluter ® -SHELF-E - CURVE

Item No.

Finish

SES1 D6 EB

SES1 D6 MBW

SES1 D6 MGS

SES1 D6 TSBG

SES1 D6 TSC

SES1 D6 TSOB

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

SES1 D6 TSSG Stone grey

210 mm - 8-1/4 "

MGS

TSBG

TSC

TSOB

TSSG

EB

Schluter ® -SHELF-E - PURE

Item No.

SES1 D7 EB

Finish

Brushed stainless steel

SES1 D7 MBW

SES1 D7 MGS

SES1 D7 TSBG

SES1 D7 TSC

SES1 D7 TSOB

SES1 D7 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

210 mm - 8-1/4 "

MBW

MGS

TSBG

TSC

TSOB

TSSG

EB

Schluter ® -SHELF-E - WAVE

Item No.

SES1 D10 EB

Finish

Brushed stainless steel

SES1 D10 MBW

SES1 D10 MGS

SES1 D10 TSBG

SES1 D10 TSC

SES1 D10 TSOB

SES1 D10 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

EB

Schluter ® -SHELF-E - SQUARE

Item No.

Finish

SES1 D3 EB

SES1 D3 MBW

SES1 D3 MGS

SES1 D3 TSBG

SES1 D3 TSC

SES1 D3 TSOB

SES1 D3 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

31

MBW

MGS

TSBG

TSC

TSOB

TSSG

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-E Pentagonal corner shelf

195 mm - 7-11/16 " MBW 195 mm - 7-11/16 " MBW

EB

75 mm - 3 "

Schluter ® -SHELF-E - FLORAL

Item No.

Finish

SES2 D5 EB

SES2 D5 MBW

SES2 D5 MGS

SES2 D5 TSBG

SES2 D5 TSC

SES2 D5 TSOB

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

SES2 D5 TSSG Stone grey

195 mm - 7-11/16 "

MGS

TSBG

TSC

TSOB

TSSG

EB

75 mm - 3 "

Schluter ® -SHELF-E - CURVE

Item No.

Finish

SES2 D6 EB

SES2 D6 MBW

SES2 D6 MGS

SES2 D6 TSBG

SES2 D6 TSC

SES2 D6 TSOB

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

SES2 D6 TSSG Stone grey

195 mm - 7-11/16 "

EB

75 mm - 3 "

Schluter ® -SHELF-E - PURE

Item No.

SES2 D7 EB

Finish

Brushed stainless steel

SES2 D7 MBW

SES2 D7 MGS

SES2 D7 TSBG

SES2 D7 TSC

SES2 D7 TSOB

SES2 D7 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

195 mm - 7-11/16 "

MBW

MGS

TSBG

TSC

TSOB

TSSG

EB

75 mm - 3 "

Schluter ® -SHELF-E - WAVE

Item No.

SES2 D10 EB

Finish

Brushed stainless steel

SES2 D10 MBW

SES2 D10 MGS

SES2 D10 TSBG

SES2 D10 TSC

SES2 D10 TSOB

SES2 D10 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MGS

TSBG

TSC

TSOB

TSSG

MBW

MGS

TSBG

TSC

TSOB

TSSG

MBW

MGS

TSBG

TSC

TSOB

TSSG

32

EB

75 mm - 3 "

Schluter ® -SHELF-E - SQUARE

Item No.

Finish

SES2 D3 EB

SES2 D3 MBW

SES2 D3 MGS

SES2 D3 TSBG

SES2 D3 TSC

SES2 D3 TSOB

SES2 D3 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-E Quadrilateral corner shelf

62 mm - 2-7/16 "

62 mm - 2-7/16 "

MBW MBW

EB

MGS

TSBG

Schluter ® -SHELF-E - FLORAL

Item No.

Finish

154 mm - 6-1/16 "

SES3 D5 EB

SES3 D5 MBW

Brushed stainless steel

Matte white

SES3 D5 MGS

SES3 D5 TSBG

SES3 D5 TSC

SES3 D5 TSOB

SES3 D5 TSSG

Matte black

Greige

Cream

Bronze

Stone grey

62 mm - 2-7/16 "

TSC

TSOB

TSSG

MBW

EB

MGS

TSBG

154 mm - 6-1/16 "

Schluter ® -SHELF-E - CURVE

Item No.

Finish

SES3 D6 EB

SES3 D6 MBW

Brushed stainless steel

Matte white

SES3 D6 MGS

SES3 D6 TSBG

SES3 D6 TSC

SES3 D6 TSOB

SES3 D6 TSSG

Matte black

Greige

Cream

Bronze

Stone grey

62 mm - 2-7/16 "

TSC

TSSG

TSOB

MBW

EB

EB

MGS

TSBG

154 mm - 6-1/16 "

Schluter ® -SHELF-E - PURE

Item No.

SES3 D7 EB

Finish

Brushed stainless steel

SES3 D7 MBW

SES3 D7 MGS

SES3 D7 TSBG

SES3 D7 TSC

SES3 D7 TSOB

SES3 D7 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

62 mm - 2-7/16 "

TSC

TSOB

TSSG

MBW

EB

MGS

TSBG

154 mm - 6-1/16 "

Schluter ® -SHELF-E - SQUARE

Item No.

Finish

SES3 D3 EB

SES3 D3 MBW

SES3 D3 MGS

SES3 D3 TSBG

Brushed stainless steel

Matte white

Matte black

Greige

SES3 D3 TSC

SES3 D3 TSOB

SES3 D3 TSSG

Cream

Bronze

Stone grey

33

TSC

TSOB

TSSG

154 mm - 6-1/16 "

Schluter ® -SHELF-E - WAVE

Item No.

SES3 D10 EB

Finish

Brushed stainless steel

SES3 D10 MBW

SES3 D10 MGS

SES3 D10 TSBG

Matte white

Matte black

Greige

SES3 D10 TSC

SES3 D10 TSOB

SES3 D10 TSSG

Cream

Bronze

Stone grey

MGS

TSBG

TSC

TSOB

TSSG

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-N Niche shelf

87 mm - 3-7/16 "

87 mm - 3-7/16 "

EB EB

Schluter ® -SHELF-N - FLORAL

Item No.

Finish

SNS1 D5 EB Brushed stainless steel

SNS1 D5 MBW

SNS1 D5 MGS

SNS1 D5 TSBG

SNS1 D5 TSC

SNS1 D5 TSOB

SNS1 D5 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

87 mm - 3-7/16 "

MBW MGS TSBG

TSC TSOB TSSG

Schluter ® -SHELF-N - CURVE

Item No.

Finish

SNS1 D6 EB Brushed stainless steel

SNS1 D6 MBW

SNS1 D6 MGS

SNS1 D6 TSBG

SNS1 D6 TSC

SNS1 D6 TSOB

SNS1 D6 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

87 mm - 3-7/16 "

MBW MGS TSBG

TSC TSOB TSSG

EB EB

Schluter ® -SHELF-N - PURE

Item No.

Finish

SNS1 D7 EB

SNS1 D7 MBW

SNS1 D7 MGS

Brushed stainless steel

Matte white

Matte black

SNS1 D7 TSBG

SNS1 D7 TSC

SNS1 D7 TSOB

SNS1 D7 TSSG

Greige

Cream

Bronze

Stone grey

87 mm - 3-7/16 "

MBW MGS TSBG

TSC TSOB TSSG

Schluter ® -SHELF-N - WAVE

Item No.

Finish

SNS1 D10 EB

SNS1 D10 MBW

SNS1 D10 MGS

Brushed stainless steel

Matte white

Matte black

SNS1 D10 TSBG

SNS1 D10 TSC

SNS1 D10 TSOB

SNS1 D10 TSSG

Greige

Cream

Bronze

Stone grey

MBW MGS TSBG

TSC TSOB TSSG

EB

MBW MGS TSBG

Schluter ® -SHELF-N - SQUARE

Item No.

Finish

SNS1 D3 EB Brushed stainless steel

SNS1 D3 MBW

SNS1 D3 MGS

SNS1 D3 TSBG

SNS1 D3 TSC

SNS1 D3 TSOB

SNS1 D3 TSSG

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

34

TSC TSOB TSSG

4 mm

5/32"

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-W Wall shelf

EB EB

300 mm - 11-13/16 "

Schluter ® -SHELF-W - FLORAL

Item No.

Finish

SWS1 D5 EB

SWS1 D5 MBW

SWS1 D5 MGS

SWS1 D5 TSBG

SWS1 D5 TSC

SWS1 D5 TSOB

SWS1 D5 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

EB

300 mm - 11-13/16 "

Schluter ® -SHELF-W - CURVE

Item No.

Finish

SWS1 D6 EB

SWS1 D6 MBW

SWS1 D6 MGS

SWS1 D6 TSBG

SWS1 D6 TSC

SWS1 D6 TSOB

SWS1 D6 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

EB

300 mm - 11-13/16 " "

Schluter ® -SHELF-W - PURE

Item No.

Finish

SWS1 D7 EB

SWS1 D7 MBW

SWS1 D7 MGS

SWS1 D7 TSBG

SWS1 D7 TSC

SWS1 D7 TSOB

SWS1 D7 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

35

300 mm - 11-13/16 " "

Schluter ® -SHELF-W - WAVE

Item No.

Finish

SWS1 D10 EB

SWS1 D10 MBW

SWS1 D10 MGS

SWS1 D10 TSBG

SWS1 D10 TSC

SWS1 D10 TSOB

SWS1 D10 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

S H O W E R S Y S T E M

17.1 Schluter ® -SHELF-W Wall shelf

EB

115 mm

4-1/2

"

300 mm - 11-13/16

"

4 mm - 5/32"

300 mm - 11-13/16 " "

Schluter ® -SHELF-W - SQUARE

Item No.

Finish

SWS1 D3 EB

SWS1 D3 MBW

SWS1 D3 MGS

SWS1 D3 TSBG

SWS1 D3 TSC

SWS1 D3 TSOB

SWS1 D3 TSSG

Brushed stainless steel

Matte white

Matte black

Greige

Cream

Bronze

Stone grey

MBW

MGS

TSBG

TSC

TSOB

TSSG

36

S H O W E R S Y S T E M

7

3

3

8

4

6

1

5

2

2

6

4

7

8

Schluter ® -KERDI-SHOWER-KIT

Includes

6

7

8

3

4

5

1

2

KERDI-SHOWER-T/-TS/-TT

KERDI-BOARD-SC

KERDI-BOARD-SC

KERDI 10 M

KERDI-BAND

KERDI-DRAIN

KERDI-KERECK-F

KERDI-SEAL-PS

KERDI-SEAL-MV

Description

Shower Tray

Shower Curb 48" x 6" x 4-1/2"

Shower Curb 38" x 6" x 4-1/2"

Waterproofing membrane 3' 3" x 33' = 108 ft 2

Waterproofing strip 5" x 33'

Flange with 2" (50 mm) outlet and stainless steel grate (E)

Preformed waterproofing corners

Pipe seal (3/4" - 20 mm )

Mixing valve seal (4-1/4" - 114 mm )

122 cm 48"

152 cm - 60"

5

1

Quantity

48" x 48" 38" x 60"

1

1

1

1

1

1

2

1

1

1

4 inside and 2 outside

1

1

152 cm - 60"

48" x 48" Kit - ABS or PVC

Item No.

KSK 1220 ABS E

KSK 1220 PVC E

Drain

Material

ABS

PVC

Grate finish

E

E

38" x 60" Kit - ABS or PVC

Item No.

KSK 965 1525 ABS E

KSK 965 1525 PVC E

Drain

Material

ABS

PVC

Grate finish

E

E

38" x 60" Kit off-center - ABS or PVC

Item No.

Drain

Material

Grate finish

KSK 965 1525S ABSE

KSK 965 1525S PVCE

ABS

PVC

Note: Tray features off-center drain placement:

10" (25.4 cm) o.c. from end of tray.

E

E

S H O W E R S Y S T E M

7

3

3

8

6

1

5

2

4 2

6

4

5

7

Schluter

®

-KERDI-SHOWER-KIT - WITHOUT THE GRATE

Includes

6

7

4

5

8

1

2

3

KERDI-SHOWER-T/-TS/-TT

KERDI-BOARD-SC

KERDI-BOARD-SC

KERDI 5 M

KERDI 10 M

KERDI 12 M

KERDI-BAND

KERDI-DRAIN Flange

KERDI-KERECK-F

KERDI-SEAL-PS

KERDI-SEAL-MV

Description

Shower Tray

Shower Curb 48" x 6" x 4-1/2"

Shower Curb 38" x 6" x 4-1/2"

Waterproofing membrane 3' 3" x 16' 5" = 54 ft 2

Waterproofing membrane 3' 3" x 33' = 108 ft 2

Waterproofing membrane 3' 3" x 39' 4" = 128 ft 2

Waterproofing strip 5" x 33'

Flange with 2" (50 mm) outlet

Preformed waterproofing corners

Pipe seal (3/4" - 20 mm )

Mixing valve seal (4-1/2" - 114 mm )

122 cm 48"

152 cm - 60"

1

8

Quantity

48" x 48" 38" x 60" 48" x 72" 72" x 72"

1 1 1 1

1

1

2 2 2

1

1

1

1

1

1

1

2

1 1

4 inside and 2 outside

1

1

2

1

152 cm - 60"

48" x 48" Kit - ABS or PVC

Item No.

KSK 1220 ABS

KSK 1220 PVC

183 cm - 72"

Drain

Material

ABS

PVC

38" x 60" Kit - ABS or PVC

Item No.

KSK 965 1525 ABS

KSK 965 1525 PVC

Drain

Material

ABS

PVC

183 cm - 72"

38" x 60" Kit off-center - ABS or PVC

Item No.

Drain

Material

KSK 965 1525S ABS

KSK 965 1525S PVC

ABS

PVC

Note: Tray features off-center drain placement:

10" (25.4 cm) o.c. from end of tray.

48" x 72" Kit - ABS or PVC

Item No.

KSK 1220 1830 ABS

KSK 1220 1830 PVC

38

Drain

Material

ABS

PVC

72" x 72" Kit - ABS or PVC

Item No.

KSK 1830 ABS

KSK 1830 PVC

Drain

Material

ABS

PVC

S H O W E R S Y S T E M

3

3

4

1 2 2

4

Schluter ® -KERDI-SHOWER-KIT - WITHOUT THE DRAIN

Includes

1

2

4

3

KERDI-SHOWER-T/-TS/-TT

KERDI-BOARD-SC

KERDI-BOARD-SC

KERDI 5 M

KERDI 10 M

KERDI 12 M

KERDI-BAND

Description

Shower Tray

Shower Curb 48" x 6" x 4-1/2"

Shower Curb 38" x 6" x 4-1/2"

Waterproofing membrane 3' 3" x 16' 5" = 54 ft 2

Waterproofing membrane 3' 3" x 33' = 108 ft 2

Waterproofing membrane 3' 3" x 39' 4" = 128 ft 2

Waterproofing strip 5" x 33'

Tray size

48" x 48"

38" x 60"

38" x 60" off-center drain

48" x 72"

72" x 72"

1

Quantity

48" x 48" 38" x 60" 48" x 72" 72" x 72"

1 1 1 1

1

1

2

1

2 2

1

1

1 1

1

2 2

Item No.

KSK 1220

KSK 965 1525

KSK 965 1525S

KSK 1220 1830

KSK 1830

39

S H O W E R S Y S T E M

1

2

3

5

4

Schluter ® -KERDI-TUBKIT

Item No.

KKB7

1

2

3

4

5

Includes

KERDI 7M

KERDI-BAND

KERDI-SEAL-PS

KERDI-SEAL-MV

KERDI-FIX

Description

Waterproofing membrane 3' 3" x 23' = 75 ft 2

Waterproofing strip 5" x 16' 5"

Pipe seal 3/4"

Mixing valve seal 4-1/2"

Sealing and bonding compound, bright white

Quantity

1

1

1

1

1

Product Listings and Certifications Table

Schluter ® -KERDI-DRAIN - Listings and Certifications

Grates

Grate - 4" (100 mm)

Flanges

CLASSIC

Stainless steel

(All finishes except EOB)

CLASSIC

Stainless steel

EOB

CONTOUR

Anodized aluminum

(All finishes)

Tileable

2" PVC

2" ABS

2" PVC Horizontal

2" ABS Horizontal

2" Stainless steel

2" Stainless steel

Threaded

3" PVC

3" ABS

3" Stainless steel

5-1/4" Adaptor

7-1/2" Adaptor

1

-

-

-

-

-

1

1

1

1

1

-

-

-

-

-

-

-

-

-

-

-

1

-

-

-

-

-

1

1

1

1

1

1

-

-

-

-

-

1

1

1

1

1

STYLE - PURE, CURVE and

FLORAL

Stainless steel

(All finishes)

1

1

1

1

1

1

-

-

-

-

-

1

1

-

1

1

-

CLASSIC

6E

Grate - 6" (150 mm)

Stainless steel

CLASSIC

ROUND

6RE

1 1

1

1

1

1

1

1

1

1

Cover

6CE

2

2

2

2

2

1

1

-

1

1

-

2

2

-

2

2

-

Schluter ® -KERDI-LINE

Bonding Flange

Center outlet - 19-11/16" - 47-1/4" (50 cm - 120 cm)

Center outlet - 51-3/16" - 70-13/16" (130 cm - 180 cm)

Off-set outlet - 27-9/16" - 47-1/4" (70 cm - 120 cm)

A

1

1

1

B

1

1

1

D

1

1

1

Grate

FLORAL (E)*

1

1

1

CURVE (F)*

1

1

1

PURE (G)*

1

1

1

Various configurations of KERDI-DRAIN and KERDI-LINE are listed by ICC-ES (Report No. PMG-1204), UPC® , and CSA as shown in the table above.

1 - Listed by ICC-ES (Report No. PMG-1204), UPC® , and CSA.

2 - Listed by CSA

For copies of these documents, please contact Schluter ® -Systems at 800-472-4588 (USA) or 800-667-8746 (Canada) or by email at [email protected]. Links to the documents can also be accessed at www.schluter.com.

40

Schluter

®

-Shower System 10-Year Limited Warranty

LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter

®

-Shower System 10-Year Limited Warranty (the “Limited Warranty” ),

Schluter Systems warrants that its Schluter

®

-Shower System (the “Products” ) will be free from manufacturing defects and will perform as described in the Schluter

®

-Shower System

Installation Handbook and Schluter

®

Waterproofing Membranes Technical Data Sheet (collectively, the “Written Materials”

1

) for a period of ten (10) years from the date of purchase when installed and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written Materials in effect at the time of installation.

For the purposes of this Limited Warranty, “Products” are defined to include, as applicable in the original installation: Schluter

®

-KERDI-SHOWER pre-fabricated shower trays,

Schluter

®

-KERDI/-DS waterproofing membranes, Schluter

®

-KERDI-BOARD waterproof building panels, Schluter

®

-KERDI-BAND waterproofing strips, Schluter

®

-KERDI-DRAIN, Schluter

®

-

KERDI-DRAIN-H and Schluter

®

-KERDI-LINE drains, Schluter

®

-KERDI-BOARD-SC shower curbs, Schluter

®

-KERDI-BOARD-SB shower benches, Schluter

®

-KERDI-SHOWER-R shower ramp, Schluter

®

-KERDI-BOARD-SN shower niches, Schluter

®

-KERECK-F waterproofing corners, Schluter

®

-KERDI-KERS waterproofing corners, Schluter

®

-KERDI-KM, Schluter

®

-DILEX profiles, Schluter

®

-SHOWERPROFILES, Schluter

®

-KERDI-LINE-FC cover plate, Schluter

®

-SHELF, Schluter

®

-KERDI-SEAL-PS/-MV seals, and/or Schluter

®

-KERDI-FIX adhesive/sealant;

“Owner” is defined as the original end user of the property in which the Products are installed; and “Tile Assembly” is defined to include the Products, non-reusable tile surfaces, and applicable setting and grouting materials.

This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for determining the suitability of the Products for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to ensure the suitability of the

Products, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly.

RESOLUTION: If the Products are installed and used in accordance with the terms and conditions as described hereinabove and such Products are proven defective within the applicable warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of the Tile Assembly or (b) pay an amount not to exceed the original square foot cost of the installation of the Tile Assembly verified to be defective. Due to conditions beyond the control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific tile, stone, or other tiling materials used in the original installation. In such event, substantially similar materials may be substituted.

EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to the failure of the Products or Tile Assembly, regardless of any strict liability or active or passive negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate, improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of the Products or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to maintain the Products, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise), efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to the Products (e.g. excess point loading, overvoltage).

This Limited Warranty excludes exterior applications, unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director.

This Limited Warranty is conditioned and will be considered null and void and Schluter Systems will have the right to refuse any claims if: (a) the Products have been improperly stored or installed, (b) any non-Schluter Systems product is substituted for a Schluter Systems component in a Schluter

®

-Shower System, or (c) the Products are subject to abusive or abnormal use, lack of maintenance, or used in a manner other than that for which the Products were designed or in any way contrary to the Written Materials

DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions, expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES ARISING BY OPERATION OF

LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR STATEMENT BY ANY EMPLOYEE OR AGENT

OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED WARRANTY OR AUTHORIZED IN

WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies contained herein are the only remedies available for breach of this Limited Warranty. This Limited Warranty extends only to the Owner and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty are permitted unless duly authorized in writing by the Schluter Systems Technical Services

Director.

This Limited Warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to the Products or the application of the Products and shall apply to any installation occurring on or after January 1, 2018. If the Schluter https://www.schluter.com/schluter-us/en_US/downloadfiles.

® -Shower System is used in conjunction with other Schluter products, a different Schluter warranty may apply. For the most current information and materials regarding Schluter Systems warranties and programs, please visit

MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems 2 with written notice within thirty (30) days of any alleged defect in the Products covered by this Limited Warranty, together with date and proof of purchase of such Products and/or all of its components and name and address of all installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect inspect the alleged failed and/or defective Products.

3 . Schluter Systems reserves the right at its election and as a condition of this Limited Warranty to

All U.S. Claims must be sent to: All Canadian Claims must be sent to:

Schluter Systems L.P.

Attn: Warranty Claims Dept.

194 Pleasant Ridge Road

Plattsburgh, NY 12901-5841

Schluter Systems (Canada), Inc.

Attn: Warranty Claims Dept.

21100 chemin Ste-Marie

Ste-Anne-de-Bellevue, QC H9X 3Y8

1 If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control.

2 This Limited Warranty is limited to sales of the Products made in and intended for use in the United States and Canada. For the purposes of this Limited Warranty, Schluter Systems L.P. shall offer warranty coverage

3 to Owners located in the United States, and Schluter Systems (Canada) Inc. shall offer warranty coverage to Owners located in Canada.

In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American

Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the parties hereto.

41

Schluter

®

-Systems Lifetime Thin-Set System Extended Limited Warranty

LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Lifetime Thin-Set System Extended Limited Warranty (the “ Limited Warranty ”),

Schluter Systems warrants that a Thin-Set System (defined hereafter) will be free from manufacturing defects and will perform as described in the applicable installation handbook(s) and/or technical data sheet(s) (collectively, the “ Written Materials

1

” ) for the lifetime (defined hereafter) of such Thin-Set System when installed in a Residential or Commercial application (defined hereafter) and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written

Materials in effect at the time of installation. In order to extend warranty coverage for Schluter

KERDI ® or KERDI ® -DS waterproofing membranes, or Schluter ® DITRA-HEAT ™ or Schluter ®

® DITRA ® or DITRA

DITRA-HEAT-DUO ™

® -XL uncoupling membranes, Schluter ® -Shower System, Schluter ®

uncoupling membrane to lifetime coverage under this Lifetime Thin-

Set System Extended Limited Warranty, Owner must complete and submit the Thin-Set System Registration to Schluter Systems, available at www.schluter.com, or submit proof of purchase and installation information (including installation date, installer’s name and address) to Schluter Systems at the address provided hereafter within ninety (90) days of installation.

For the purposes of this Limited Warranty, a “ Thin-Set System ” is defined as Schluter

KERDI ® -BOARD within a Schluter ® -Shower System, Schluter ® KERDI ® or KERDI ®

® DITRA ® or DITRA ® -XL uncoupling membranes, Schluter ®

-DS waterproofing membranes, or Schluter ®

-Shower System, Schluter ®

DITRA-HEAT™ or Schluter ®

-

DITRA-HEAT-DUO™ uncoupling membrane installed with Schluter SET

®

, Schluter ALL-SET

®

, or Schluter FAST-SET

® thin-set mortar; “ Owner ” is defined as the original end user of the property in which a Thin-Set System is installed; “ Lifetime ” is defined as that period of time that the original Thin-Set System installation remains unchanged and under the ownership of the Owner;

“ Residential ” applications are defined to include Thin-Set System installations in single family detached residential dwellings; and “ Commercial ” applications are defined to include

Thin-Set System installations in multi-family residential dwellings (e.g., apartments, condominiums, cooperatives, and timeshares). Thin-Set System installations in public places, commercial establishments and other applications may be afforded lifetime coverage under this Limited Warranty on a case by case basis as determined by the Schluter Systems

Technical Services Director.

This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for determining the suitability of a Thin-Set System for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to ensure the suitability of a Thin-Set System, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly.

RESOLUTION: If a Thin-Set System is installed and used in accordance with the terms and conditions as described hereinabove and such Thin-Set System is proven defective within the applicable warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of the Thin-Set System or (b) pay an amount not to exceed the original square foot cost of the installation of the Thin-Set System verified to be defective. Due to conditions beyond the control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific tile, stone, or other flooring materials used in the original installation. In such event, substantially similar materials may be substituted.

EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to the failure of a Thin-Set System, regardless of any strict liability or active or passive negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate, improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of a Thin-Set System or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to maintain a Thin-Set System, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise), efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to a Thin-Set System (e.g. excess point loading, overvoltage). This Limited Warranty excludes exterior, submerged and steam room applications and further excludes applications using glass tile, resin-backed tile, and/or moisture sensitive stone unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director.

Schluter ® DITRA-HEAT™-E-HK heating cables and Schluter ® DITRA-HEAT™-E thermostats are specifically excluded from coverage under this Limited Warranty. Any substitution of a non-Schluter Systems product for a Schluter Systems component in a Thin-Set System voids this Limited Warranty.

DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions, expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR

PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES

ARISING BY OPERATION OF LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR STATEMENT

BY ANY EMPLOYEE OR AGENT OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED

WARRANTY OR AUTHORIZED IN WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies contained herein are the only remedies available for breach of this Limited Warranty. Schluter Systems excludes and in no event shall have any liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to failure of a Thin-Set System.

This Limited Warranty extends only to the Owner and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services

Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty are permitted unless duly authorized in writing by the Schluter Systems Technical Services Director.

This Limited Warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to a Thin-Set System or the application of a Thin-Set System and shall apply to any installation occurring on or after March 13, 2017. For the most current information and materials regarding Schluter Systems warranties and programs, please visit https://www.schluter.com/schluter-us/en_US/downloadfiles.

MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems with written notice within thirty (30) days of any alleged defect in a

Thin-Set System covered by this Limited Warranty, together with date and proof of purchase of such Thin-Set System and/or all of its components and name and address of all installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect . Schluter Systems reserves the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and/or defective Thin-Set System.

All U.S. Claims shall be sent to:

Schluter Systems L.P.

Attn: Warranty Claims Dept.

194 Pleasant Ridge Road

Plattsburgh, NY 12901-5841

All Canadian Claims shall be sent to:

Schluter Systems (Canada), Inc.

Attn: Warranty Claims Dept.

21100 chemin Ste-Marie

Ste-Anne-de-Bellevue, QC H9X 3Y8

1

If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control.

2

In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American

Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the parties hereto.

Schluter Systems L.P.

194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841

Tel.: 800-472-4588

Fax: 800-477-9783

Schluter Systems (Canada) Inc.

21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8

Tel.: 800-667-8746

Fax: 877-667-2410 www.schluter.com

This technical data sheet is subject to change without notice. Please visit www.schluter.com for the latest version.

advertisement

Related manuals

Download PDF

advertisement