Advantage 15721000, 15721000 GL Export Instruction Manual

Bagless Cyclone Back Pack
Vacuum Cleaner
Instruction Manual
Model 15721000 & 15721000 GL Export
CAUTION - read this Instruction Manual
before using the machine.
read this Instruction Manual.
.
Manufactured
Rugged Industries Pty Ltd
E: [email protected]
P: +61 2 9680 0052
33 Antoine Street
Rydalmere NSW 2116 Australia
www.ruggedindustries.com.au
TABLE of CONTENTS
No
1.
2.
Topic
Pg
No
Topic
Pg
1
MODELS
1
11
CLEANING THE MOTOR FILTER
7
2
GUIDE TO YOUR MACHINE
1
12
CARRYING AND CORD STORAGE
7
3
GENERAL ARRANGEMENT
2
13
TROUBLE SHOOTING GUIDE
8
4
GENERAL SAFETY INSTRUCTIONS
3
14
SPECIFICATIONS
8
5
ASSEMBLING YOUR MACHINE
4
15
PARTS DIAGRAM
9
6
ADJUSTING AND WEARING
4
16
PARTS LIST
10
7
VACUUMING APPLICATIONS
5
17
WIRING DIAGRAM
10
8
ONBOARD CONVENIENCE
6
18
ADVANTAGE WARRANTY
11
9
EMPTYING THE BIN
6
19
WARRANTY REGISTRATION
11
10
CLEANING THE BIN
7
MODELS
Part No.
Description
Country of Use
15721000
Advantage
Australia, New Zealand
15721000 GL
Advantage
220 V a.c. IEC countries
GUIDE TO YOUR MACHINE
1
2
3
4
5
6
7
8
8A
9
10
11
12
13
14
15
16
17
18
19
Button Bin Release
Handle
Lever Lock
Carabiner
Inlet
Poppet Valve
Hinge
Cord Coupling
Cord Coupling IEC
Power Inlet
Socket Extension Cord
Cord Restraint
Exhaust
Lid Bin
Grommet IEC
Tank Assembly
Lever Bin Release
Lid Bin Catch
Cover Filter
Filter Motor
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Housing Motor Assembly
Switch ON/OFF
Tool Holder
Pad Waist
Pad Back
Pad Shoulder
Hose Assembly
Cord Extension
Bent End Piece
Suction Regulator
Wands 2 Piece
Dusting Brush
Upholstery Tool
Tool Caddy
Floor Tool EZ2GO
Crevice Tool
Combination Floor Tool (Optional)
Turbine Brush (Optional)
Duster Microfibre
Pg 1
3.
GENERAL ARRANGEMENT
1
3
4
2
5
6
13
7
12
8
26
10
11
Model 15721000 GL
27
35
36
34
33
32
29 28
30 31
9
7
8A
13
12
9
11
15
16
25
37
10A, 14
17
18
38
19
24
20
23
0
0
20
22
20
0
21
0
Pg 2
4.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
GENERAL SAFETY INSTRUCTIONS
Read this manual and follow the instructions before using the machine.
This machine is intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offices, and
Rental Businesses.
This machine can be used for domestic use.
Warning. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Warning. (Europe) This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Warning. (Europe) Cleaning and user maintenance shall not be made by children without supervision
Warning. Children should be supervised to ensure that they do not play with the appliance.
Warning. This machine is for dry use only.
Warning. This machine is not suitable for picking up hazardous dust.
Warning. Do not leave unattended when it is plugged into the electricity supply.
Warning. Do not unplug with wet hands.
Warning. Do not pull on cord to unplug.
Warning. Do not pull or carry by cord.
Warning. Keep cord away from heated surfaces
Warning. Do not use to vacuum flammable, combustible, explosive, toxic or dangerous substances, or use in areas
where they may be present.
Warning. Do not vacuum anything that is burning such as cigarettes, matches or hot ash
Warning. If the appliance is not working, has been dropped, damaged, left outdoors, or dropped into water, return it
to Rugged Industries Pty Ltd or authorized Service Agent for service
Warning. Do not hose down internal parts of the machine.
Warning. Switch OFF and unplug from electricity supply when not in use and before cleaning or servicing.
Caution. This machine is for indoor use only.
Caution. This machine shall be stored indoors only.
Caution. Do not leave this machine in the sun.
Caution. Use only with approved extension cord.
Caution. Ensure that cord is not jammed or trapped during vacuuming. Extend the cord completely but do not
stretch or tug on the cord.
Caution. With the extension cord unplugged, wind cord from machine end to prevent cord knuckling, and drape over
the frame for storage.
Caution. Do not vacuum hard objects such as glass, gravel, and metal objects.
Caution. Fine dust such as powders, chalk dust can only be vacuumed in small amounts. Do not vacuum large
powder spills.
Caution. Do not put any objects into openings.
Caution. Do not use with any openings blocked.
Caution. Do not fill past “Max” level marked on the Bin Wall. DO NOT OVER FILL
Caution. Do not vacuum plastic bags or large paper objects that block the mesh filter.
Caution. Use Duster provided to remove fluff, hair, lint, or anything that reduces air flow off the Mesh Filter.
Caution. Vacuum Motor Filter after emptying bin to prevent air flow loss.
Caution. Do not use with Tank Assembly detached from Motor Housing Assembly, or without filters in place.
Caution. Use only with Rugged Industries recommended parts and attachments
Caution. This machine has been fitted with a suction relief Poppet Valve, which activates on hose or nozzle
blockage. In the event of any blockage, turn the machine OFF, and clear the blockage before restarting.
Caution. Advantage has been fitted with a safety thermostat that will automatically SHUT DOWN the machine in the
event of hose blockage or clogged filter. In the event of SHUT DOWN turn the power OFF at the machine, clear the
blockage and clean the filter. The thermostat will reset in approximately 15 minutes.
Caution. Do not use detergents, cleaning agents, polish for cleaning any part of the Advantage vacuum cleaner
Caution. Transport the Advantage in the upright position only.
SAVE THESE INSTRUCTIONS
Pg 3
5.
1
ASSEMBLING THE MACHINE
3
4
5
6
Each machine is supplied with 2 x stainless steel metal wands, 1 x Hose Assembly, 1 x EZ2GO Floor Tool,
1 x Dusting Brush, 1 x Upholstery Tool, 1 x Tool Caddy, 12 x Motor Filters. 1 Motor Filter is fitted, and the other is
positioned behind the Tank as a spare. An additional two packets of 5 are included for spare replacement.
The machine is configured for right handed operators. You can change to left handed configuration by turning the
tank assembly 180°. Release the Tank Lock at the top of the machine to change configuration or to remove the tank.
Insert Hose Assembly to Inlet Bayonet and turn anticlockwise to secure bayonet fitting
Connect wand with Tool Caddy to the Bent End Piece.
Connect the 2 wands together to create one length.
Connect the Tool attachment of your choice to the wand.
6
ADJUSTING AND WEARING
2
1. Loosen both Shoulder Pads
4. Secure Waist Pad around waist to suit
your personal comfort.
2. Lift Advantage onto Shoulder sliding
one arm through the shoulder harness.
Slide other arm through the second
shoulder harness
3. Tighten Shoulder Pad to suit your
personal comfort
5. Wear the Advantage as illustrated
Pg 4
7.
VACUUMING APPLICATIONS
1. The EZ2GO™ floor tool has been designed for both hard and
soft floors. Its low profile allows easy access to low recesses, under
desks, tables, chairs and furniture.
2. When vacuuming loose fabric or light floor mats, adjust the
Suction Regulator slider to the desired level to relieve the vacuum
suction.
3. Advantage is supplied
with a Tool Caddy and on
board tool holder on the
Waist Pad. Whatever your
preference you can carry a
full complement of tools for
any vacuuming task you
encounter.
5. The Upholstery Tool is used for upholstery
cleaning and narrow gaps.
4. The adjustable Dusting Brush is used
for upholstery, corners, blinds, desk tops
and cleaning cornices.
6. The Crevice Tool is used for
crevice and corner cleaning,
upholstery or spot cleaning.
7. Using the optional Combination
Floor Tool you sweep and vacuum at
the same time. This tool is suited for
cleaning irregular surfaces, e.g. tiles,
safety floors, timber floors and
carpet. The foot operated button
extends the bristle for hard floors and
retracts for use on carpet. It is extra
wide for improved productivity.
8. The optional Turbine Brush is used for large areas,
easier hair pick up or when improved productivity and
efficiency are required.
Pg 5
8.
ON BOARD CONVENIENCE
1. The Smart Cord restraint eliminates cord
strain, and provides easy access for cord
replacement.
4. Carry your favourite tools on the Waist Pad
9.
2. When on the go, or vacuuming
dusty areas, a spare filter can be
carried behind the back pad.
5. The Motor Filter is located above the
motor. Simply unscrew the Cover and
service or replace the filter as needed.
3. Simply unclip the Micro-fibre Duster
from the Carabiner to clean the Bin and
return after use.
6. All back padding use tools free
assembly. Replace parts when worn.
EMPTYING THE BIN
1. Uncouple the Bayonet Fitting on the Vacuum
Hose. (Turn clockwise)
2. Turn the Lever Lock 180º to lock and unlock
tank.
3. Press the Bin Release
Button to empty bin.
Pg 6
10.
CLEANING THE BIN
1. Remove dirt lodged on the Filter Mesh by
wiping with the Duster. Filter holes must be
visible all times for good filtration.
11.
CLEANING THE MOTOR FILTER
2. Located under the Tank Assembly and above the
Motor Housing Assembly. Remove the Filter Cover
twisting in an Anti-Clockwise direction. Remove the
soiled filter and replace with a clean filter.
12.
2. Remove fluff from seals and cavities
shown.
CARRYING AND CORD STORAGE
1. Turn power OFF at the machine
and Power Point. Unplug cord from
Power Point and wind from machine
end. Drape cord over the Frame.
1. Vacuum the soiled filter using the Bent End Piece working from
the centre to the edges. Vacuum the soiled side 75% of the time and
the white side 25% of the time. A 30second vacuum restores the filter
to 90% of its original condition. Store the refurbished filter behind the
back padding for re-use. Replace the filter when worn. The filter may
also be washed for a thorough clean. Press squeeze the filter to
remove water, do not wring dry. Use only when filter is dry.
2. Wrap Waist Pad ends
around to the front of the
machine and lock together.
3. Ensure Lever Lock is engaged.
Lift the machine from the front by the
Handle to carry. Always transport
the machine in an upright position.
Pg 7
13.
TROUBLE SHOOTING GUIDE
Problem
Machine does not operate
Loss of Suction
14.
•
•
•
•
•
•
•
•
•
•
•
•
Possible Cause
Not plugged into power point
No power at the power point
Machine switch or power switch OFF
Faulty Cord or Coupling Cord
Faulty Switch or Motor
Blockage
Suction Regulator open
Bin Full
Motor Filter Blocked
Mesh Filter Blocked
Bin Seal pulled out
Poppet Valve loose
•
•
•
•
•
•
•
•
•
•
•
•
Solution
Plug into Power socket
Move to a functional power point.
Turn switch ON
Replace Cord
Contact Service Centre
Check for blockage and clear
Close Suction Regulator
Empty Bin
Clean Filter
Clean Filter
Replace Seal
Tighten Poppet Valve
SPECIFICATIONS
Physical
Capacity (l)
Gross Package Weight (kg)
Carry Weight (kg)
Noise (dBA)
Cord Length (m)
Hose Length (m)
Reach Length (m)
Accessory Dimension (mm)
Wand (mm)
Floor Tool (mm wide) EZ2GO
Filtration
Primary
Motor Filter
Efficiency
Efficacy
Bacteria: Escherichia Coli, Klebsiella Pneumoniae,
Staphylococcus Aureus, Pseudomonas Aeruginosa,
Corneybacterium Ammoniagenes
5
7.5
4.9
72
18
1.2
20.5
32
2 pc x 500
285
Multi-cyclone
Antimicrobial
99.98%
99.9% CFU 24h
Machine
Power (w)
Suction (kPa)
Over Suction Protection
Voltage (V a.c.)
Compliance
Class
Type
Motor
Type
Air Flow (l/s)
Thermal Protection
Warranty
Period
900
25
Poppet Valve
220 - 240
RCM
2
Dry
Flow Thru
49
100ºC
1 Year
Refer Warranty Statement
Moulds: Aspergillus Niger,
Trycophyton, Mentagrophytes
Note: The Advantage vacuum cleaner design incorporates Australian Patent PCT/AU2016/051151, India Patent
201817019780, China Patent 201680068540.0, Registered Design App. No. 201612860, Innovative Patent App No.
2016101477, EZ2GO™ No. 1787984
Pg 8
15.
PARTS DIAGRAM
30
22
2x23
20
19
4x1
27
29
21
3
28
18
26
17
2
35
2x25
2x24
32
2x31
16
15
34
3
33
2x1
4x36
1
37
38
4x3
14
47
39
40
41
4
5
50
13
48
42
2x1
49
12
43
11
6
2x51
10
9
9A
A
9B
A
A
44
3x1
52
7
5553
45
54
8
8A
4x1
56
55
46
58
59
57
Pg 9
PARTS LIST
Item Part No.
Qty
Item Part No.
Description
Qty
1 16018004
Screw WN1412 KB40 x 12-Z
34
30
16015002
Pad Back
1
2 16702005
Clamp Motor and Pad Assy
1
31
16018005
Screw WN1412 KB40 x 8 BZ
2
3 16018007
Screw WN1412 KB50 x 20-Z
5
32
16011000
Lever Bin Release
1
4 16022002
Wire Blue 180L
1
33
16018010
Spring Bin Release
1
5 16018018
Switch Rocker
1
34
16017000
Retainer Button Spring
1
6 16008000
Insulation Base 2pc set
1
35
16001005
Button Bin Release
1
7 16702002
Cap Motor Assy
1
36
16002008
Cap Screw
4
8 16002004
Cord Extension 18m
1
37
16007000
Handle
1
Cord Extension 18m GL
1
38
16702000
Cover and Seal Assy
1
Cord Coupling
1
39
16018009
Spring Poppet Valve
1
9A 16002015
Cord Coupling GL
1
40
16021000
Valve Poppet
1
9B 16006002
Grommet Cord Restraint GL
1
41
16021001
Valve Poppet Inlet
1
10 16002006
Cord Restraint Smart
1
42
16007001
Hinge Tank
1
11 16018017
Socket Inlet
1
43
16005000
Filter Mesh
1
12 16007002
Housing Motor
1
44
16701003
Bin Inner and Seal Assy
1
13 16022001
Wire Brown 160L
1
45
16001004
Bin Outer
1
14 16008001
Insulation Side & Back 4pc set
1
46
16711001
Lid Bin and Seal Assy
1
15 16712003
Motor Vac & TP GL 900W Assy
1
47
16018000
Shell Tank
1
16 16712002
Motor Vac & TP 900W Assy
1
48
16007005
Hose Connect & 75Seal
1
17 16018012
Seal Top Motor
1
49
16007003
Hose BEP AM Assy
1
18 16015001
Plate Motor Mounting
1
50
16707003
Hose BEP Connector AM Assy
1
19 16005003
Filter Motor AM JA14 (5Pkt)
2.4
51
16022005
Wand 32 x 500L S/S
2
20 16002001
Cover Filter
1
52
16019002
Tool Crevice
1
21 16022003
Washer 3/16 x 1/2
1
53
16019003
Tool Dusting Brush
1
22 16011002
Lever Lock
1
54
16019004
Tool EZ2GO
1
23 16013001
Nut M5
2
55
16019007
Tool Upholstery
1
24 16018016
Screw M5 x 60
2
56
16019008
Tool Caddy
1
25 16022004
Washer M5
2
58
16003000
Duster Micro-fibre
1
26 16005004
Frame
1
27 16002018
Carabiner D50
1
57
16019006
Tool Combination 300mm
1
28 16015004
Pad Waist
1
59
16019005
Tool Turbine Brush
1
29 16015003
Pad Shoulder L & R 4pc set
1
8A 16002010
9 16002003
WIRING DIAGRAM
VACUUM MOTOR
17.
Description
Optional Accessories
THERMOSTAT
100ºC
0.47µF CAPACITOR
16.
SWITCH DPST
POWER INLET
COUPLING
CORD
EXTENSION
CORD
Pg 10
18.
ADVANTAGE WARRANTY
Vacuum cleaners manufactured by Rugged Industries Pty Ltd are to the highest quality standards. We encourage you to
care for your product and follow the instructions in this manual, and in turn you will benefit with a product that provides
performance and long life.
The following statement is a requirement under Australian Consumer Law and applies to consumer sale of goods and
services. In this statement “Our” means Rugged Industries and “you” means original purchaser.
“Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure”
In addition to guarantees under Australian Consumer Law, Rugged Industries warrants the Advantage vacuum cleaner and
model variants against faulty material and/or workmanship for a period of one year, from the date of purchase by the
consumer, when operated and maintained in accordance with the instructions in this Manual.
The following explains conditions and what to do in the event of a claim:
Rugged Industries or authorized Service Agent or person will replace parts determined as faulty, but this does not
apply to normal consumable, wear, and rotating parts that require replacement under normal use, including but not
limited to rubber parts, filters, hoses, power cords, floor tools, dusting brush, crevice tools, upholstery tool, tool caddy,
turbine brush etc.
Warranty does not cover any machine or component that has been altered, abused, neglected, modified or used with
non-genuine Rugged Industry components.
Warranty does not cover damage by transportation, freight, delivery, product return, accident, misapplication,
improper service or maintenance, blockages, vacuuming water or bulk powder, moist carpet, use or other
instructions not in accordance with the instructions in this Manual.
All repairs and servicing during the warranty period must be carried out by Rugged Industries Pty Ltd or authorised
Rugged Industries Service Agent or person. Rugged Industries Pty Ltd or authorised Service Agent may request you
to complete a Warranty Claim / Stock Return Form or other similar form before returning any goods. All reasonable
expenses associated with any transportation in returning goods for a warranty claim are the consumer’s
responsibility, and in all instances the product is transported at the owner’s risk.
Rugged Industries will not be responsible for cost of repairs or damages caused by unauthorised persons.
Warranty claims must be made within the warranty period and proof of purchase must be supplied with the claim.
19.
WARRANTY REGISTRATION DETAILS
Purchaser:
Purchase Date:
Address:
State:
Model No:
Post Code:
Contact:
Ph:
Serial No:
Purchased From:
Address:
Pg 11
Rev: 01111
Rev 010918
Pg 13