Below you will find brief information for Quantum GX5500S. This VHF/FM marine transceiver offers a commercial-grade ITU Class D DSC, superior receiver performance, a powerful loud hailer, and a clear internal speaker. Its alphanumeric keypad allows direct channel entry, while the NAV mode displays position data. Enjoy features like programmable scan, dual watch, and one-button access to emergency channels.
Advertisement
Advertisement
QUANTUM GX5500S 25 Watt VHF/FM Marine Transceiver Owner's Manual z Commercial Grade ITU Class D DSC Transceiver z Superior Receiver Performance (80 dB rejection) z 30W Loud Hailer complete with Listen Back and 4 Fog Horns, Bells,and Whistle z 2.2 inch Internal Speaker Produces Clear Load Audio z 2.58 x 1.28 inch Dot Matrix Display z Alphanumeric keypad allows direct entry of channel numbers or selection or most used functions z NAV mode, Displays Latitude/Longitude, Position Time, SOG, COG z Oversized Rotary Selector, Volume and Squelch Knobs z Programmable Scan, Selectable Priority Scan, and Dual Watch z One-Button Access to Channel 16 and 9 z Treble and Bass Audio Tone Control z Two Inputs for Optional RAM+ or VH-310 Remote Microphone z Optional Voice Scrambler z Plug and Play Front or Rear Panel Microphone (optional MEK-4 extension cable available) @ When attached to GPS Receiver GX5500S Page 1 TABLE OF CONTENTS 1 GENERAL INFORMATION ....................................................................................................................... 4 1.1 INTRODUCTION .......................................................................................................................... 4 2 PACKING LIST ......................................................................................................................................... 4 3 OPTIONS ................................................................................................................................................... 5 4. SAFETY/WARNING INFORMATION ........................................................................................................ 5 5 FCC RADIO LICENSE INFORMATION .................................................................................................... 6 5.1 STATION LICENSE ..................................................................................................................... 6 5.2 RADIO CALL SIGN ..................................................................................................................... 6 5.3 CANADIAN SHIP STATION LICENSING .................................................................................... 6 5.4 FCC / INDUSTRY CANADA INFORMATION ............................................................................. 6 6 FCC NOTICE ............................................................................................................................................. 7 7 GETTING STARTED ................................................................................................................................. 8 7.1 ABOUT VHF RADIO ................................................................................................................... 8 7.2 SELECTING AN ANTENNA ....................................................................................................... 8 7.3 COAXIAL CABLE ........................................................................................................................ 8 8 INSTALLATION ......................................................................................................................................... 9 8.1 LOCATION ................................................................................................................................... 9 8.2 ELECTRICAL CONNECTIONS ................................................................................................... 9 8.3 ACCESSORY CABLE ............................................................................................................... 10 8.4 CHECKING GPS CONNECTIONS .......................................................................................... 12 8.5 CHANGING THE GPS TIME ................................................................................................... 12 8.6 CHANGING THE TIME LOCATION ........................................................................................ 13 8.7 CHANGING COG TO TRUE OR MAGNETIC ....................................................................... 13 8.8 TREBLE AND BASS AUDIO TONE CONTROL .................................................................... 14 8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION .......................................................... 15 8.10 OPTIONAL ENHANCED RAM+ SECOND STATION MIC OR VH-310 HANDSET INSTALLATION .................................................................................... 16 9 CONTROLS AND INDICATORS ............................................................................................................. 18 9.1 CONTROLS AND CONNECTIONS .......................................................................................... 18 10 BASIC OPERATION ................................................................................................................................ 24 10.1 PROHIBITED COMMUNICATIONS .......................................................................................... 24 10.2 RECEPTION ............................................................................................................................... 24 10.3 TRANSMISSION ........................................................................................................................ 25 10.4 TRANSMIT TIME-OUT TIMER (TOT) ...................................................................................... 25 10.5 SIMPLEX/DUPLEX CHANNEL USE ........................................................................................ 25 10.6 USA, CANADA, AND INTERNATIONAL MODE ...................................................................... 25 10.7 NOAA WEATHER CHANNELS ................................................................................................ 26 10.7.1 NOAA Weather Alert ................................................................................................. 26 10.7.2 NOAA Weather Alert Testing ................................................................................... 26 10.8 EMERGENCY (CHANNEL 16 USE) ........................................................................................... 27 10.9 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) .............................................................. 27 10.10 MAKING TELEPHONE CALLS ................................................................................................ 28 10.11 OPERATING ON CHANNELS 13 AND 67 ............................................................................ 28 10.12 DUAL WATCH (TO CH16) ......................................................................................................... 29 10.13 SCANNING ................................................................................................................................. 29 10.13.1 Selecting the Scan Type .......................................................................................... 29 10.13.2 Memory Scanning (M-SCAN) .................................................................................... 29 10.13.3 Priority Scanning (P-SCAN) ...................................................................................... 30 10.14 PA/FOG OPERATION ............................................................................................................... 31 10.14.1 Operating the PA HAIL mode .................................................................................. 31 10.14.2 Operating the FOG HORN mode ........................................................................... 32 10.15 DISPLAY SOG AND COG INFORMATION ............................................................................ 32 10.16 LCD DIMMER ............................................................................................................................ 32 10.17 INTERCOM OPERATION ......................................................................................................... 34 10.17.1 Communication ........................................................................................................... 34 10.17.2 Calling ......................................................................................................................... 35 10.18 VOICE SCRAMBLER ................................................................................................................ 35 11 DIGITAL SELECTIVE CALLING ............................................................................................................. 36 11.1 GENERAL .................................................................................................................................. 36 11.2 MARITIME MOBILE SERVICE IDENTITY (MMSI) ................................................................. 36 11.2.1 What is an MMSI? ................................................................................................... 36 11.2.2 Programming the MMSI ............................................................................................ 37 11.3 DSC DISTRESS CALL ............................................................................................................. 38 11.3.1 Transmitting a DSC Distress Call ........................................................................... 38 11.3.2 Receiving a DSC Distress Call ............................................................................... 40 11.4 ALL SHIPS CALL ..................................................................................................................... 40 11.4.1 Transmitting an All Ships Call ................................................................................. 41 11.4.2 Receiving an All Ships Call ..................................................................................... 41 Page 2 GX5500S TABLE OF CONTENTS 11.5 12 13 14 15 16 17 18 INDIVIDUAL CALL .................................................................................................................... 11.5.1 Setting up the Individual / Position Call Directory ................................................. 11.5.2 Setting up Individual Reply ...................................................................................... 11.5.3 Setting up Individual / Group Call Ringer ............................................................... 11.5.4 Transmitting an Individual Call ................................................................................ 11.5.5 Receiving an Individual Call .................................................................................... 11.6 CALL WAITING DIRECTORY .................................................................................................. 11.6.1 Enabling the Call Waiting Feature .......................................................................... 11.6.2 Reviewing Received Calls Logged into the Call Waiting Directory ..................... 11.6.3 To Delete the Received Log from the “DSC Log” Directory ............................... 11.7 GROUP CALL ........................................................................................................................... 11.7.1 Setup a Group Call .................................................................................................. 11.7.2 Transmitting a Group Call ........................................................................................ 11.7.3 Receiving a Group Call ............................................................................................ 11.8 POSITION REQUEST ............................................................................................................... 11.8.1 Setting up Position Reply ........................................................................................ 11.8.2 Transmitting a Position Request to Another Vessel ............................................. 11.8.3 Receiving a Position Request ................................................................................. 11.9 POSITION SEND ...................................................................................................................... 11.9.1 Transmitting a DSC Position Send Ringer ............................................................ 11.9.2 Transmitting a DSC Position Send Call ................................................................. 11.9.3 Receiving a DSC Position Send Call ..................................................................... 11.10 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) .............................................. RADIO SETUP MODE ............................................................................................................................ 12.1 LCD CONTRAST ....................................................................................................................... 12.2 TIME OFFSET ........................................................................................................................... 12.3 TIME DISPLAY .......................................................................................................................... 12.4 SOG (SPEED OVER GROUND) UNIT .................................................................................. 12.5 TRUE MAGNETIC CHANGE (NAV DISPLAY) ........................................................................ 12.6 PRIORITY CHANNEL SET ....................................................................................................... 12.7 SCAN TYPE .............................................................................................................................. 12.8 SCAN RESUME TIME ............................................................................................................... 12.9 KEY BEEP ................................................................................................................................. 12.10 WEATHER ALERT SETUP ........................................................................................................ 12.11 CHANNEL NAMING .................................................................................................................. 12.12 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET ................................. 12.13 TREBLE AND BASS AUDIO TONE CONTROL .................................................................... 12.14 FOG ALERT TONE FREQUENCY ............................................................................................ 12.15 CALENDAR SETUP .................................................................................................................. ENHANCED RAM+ MIC OPERATION ................................................................................................... 13.1 RAM+ MIC CONTROLS ........................................................................................................... 13.2 INTERCOM OPERATION ......................................................................................................... 13.2.1 Communication ........................................................................................................... 13.2.2 Calling ......................................................................................................................... 13.3 PA/FOG OPERATION ................................................................................................................ 13.3.1 Operating the PA / Hailer .......................................................................................... 13.3.2 Operating the FOG Horn .......................................................................................... 13.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) .............................................. 13.5 DSC / RADIO SETUP MODE .................................................................................................... 13.5.1 Lat/Lon or Time and SOG display ......................................................................... VH-310 HANDSET OPERTION ............................................................................................................ 14.1 VH-310 HANDSET CONTROLS .............................................................................................. 14.2 INTERCOM OPERTION ............................................................................................................ 14.2.1 Communication ........................................................................................................... 14.2.2 Calling ......................................................................................................................... 14.3 PA/FOG OPERATION ................................................................................................................ 14.3.1 Operating the PA / Hailer .......................................................................................... 14.3.2 Operating the FOG Horn .......................................................................................... 14.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) .............................................. 14.5 DSC / RADIO SETUP MODE .................................................................................................... 14.5.1 Lat/Lon or Time and SOG display ......................................................................... 14.5.2 External Speaker AF Selection ................................................................................ MAINTENANCE ...................................................................................................................................... 15.1 REPLACEMENT PARTS ........................................................................................................... 15.2 FACTORY SERVICE ................................................................................................................. 15.3 TROUBLESHOOTING CHART ................................................................................................. CHANNEL ASSIGNMENTS .................................................................................................................... WARRANTY ............................................................................................................................................ SPECIFICATIONS ................................................................................................................................... GX5500S 41 41 43 43 44 46 46 46 47 47 48 48 49 50 51 51 52 53 54 54 54 56 56 58 58 59 60 60 61 61 62 62 63 63 64 65 66 67 67 70 70 73 73 73 74 74 74 75 76 77 78 78 82 82 82 83 83 83 84 85 86 86 88 88 88 89 90 96 99 Page 3 1 GENERAL INFORMATION 1.1 INTRODUCTION The STANDARD HORIZON GX5500S is a VHF/FM Marine Transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. The GX5500S can be operated from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25 watts. The GX5500S is capable of DSC (Digital Selective Calling) Class D operation and two Enhanced second station RAM+ mic (CMP25 remote-control speaker/ microphone with display) and/or VH-310 Handset. Class D operation allows continuous receiving of Digital Selective Calling functions on channel 70 even if the radio is receiving a call. The GX5500S operates on all currently-allocated marine channels which are switchable for use with USA, International, or Canadian regulations. It has an emergency channel 16 which can be immediately selected from any channel by pressing the red [16/9] key. NOAA Weather channels can also be accessed immediately by pressing the [WX] key with channel selection. Other features of the GX5500S include: 30W PA/Fog, multi-station intercom, scanning, priority scanning, removeable speaker mic, high and low voltage warning, and GPS repeatability. 2 PACKING LIST When the package containing the transceiver is first opened, please check it for the following contents: y y y y y GX5500S Transceiver Mounting Bracket and attaching hardware Owner’s Manual Quick-Reference Card Power Cord Page 4 GX5500S 3 OPTIONS MMB-84 ......................................................................... Flush-Mount Bracket CMP25B/W ............... Remote-Access Microphone (RAM+ Mic, Black/White) VH-310 .................................................. Remote Handset (available in Black) CT-100 ............................................... 23-foot Extension Cable for RAM+ Mic CVS2500 ............................................................................... Voice Scrambler MLS-310 ............ 10W amplified External Speaker with on/off volume control MLS-300 ...................................................................... External Loudspeaker 101W ............................................................... Mini White Extension Speaker 220SW ..................................................................... 4.5” Round Hail/PA Horn 240SW ........................................................ 5” x 8” Rectangular Hail/PA Horn MEK-4 .... Microphone Extension Kit (to remote front panel mic to rear panel) 4 SAFETY / WARNING INFORMATION This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 0.89 m (2.92 feet). Failure to observe these restrictions will result in exceeding the FCC RF exposure limits. Antenna Installation: The antenna must be located at least 0.89 m (2.92 feet) away from passengers in order to comply with the FCC RF exposure requirements. Lithium Battery Included: This radio contains a Lithium Battery. At the end of radio’s useful life, under various state and lows, it may be illegal to dispose of Lithium Battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. ON-LINE WARRANTY REGISTRATION Please visit www.standardhorizon.com to register the GX5500S Marine VHF. It should be noted that visiting the Web site from time to time may be beneficial to you, as new products are released they will appear on the STANDARD HORIZON Web site. PRODUCT SUPPORT INQUIRIES If you have any questions or comments regarding the use of the GX5500S, you can visit the STANDARD HORIZON Web site to send an E-Mail or contact the Product Support team at 800-767-2450 M-F 7:00-5:00PST. GX5500S Page 5 5 FCC RADIO LICENSE INFORMATION Standard Horizon radios comply with the Federal Communication Commission (FCC) requirements that regulate the Maritime Radio Service. 5.1 STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters (except Hawaii) which is under 20 meters in length. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal is required to have a ship station license. FCC license forms, including applications for ship (506) and land station licenses can be downloaded via the Internet at www.fcc.gov/forms. To obtain a form from the FCC, call (888) 225-5322. 5.2 RADIO CALL SIGN Currently the FCC does not require recreational boaters to have a Ship Radio Station License. The USCG recommends the boats registration number and the state to be used. 5.3 CANADIAN SHIP STATION LICENSING You may need a license when traveling in Canada. If you do need a license contact their nearest field office or regional office or write: Industry Canada Radio Regulatory Branch Attn: DOSP 300 Slater Street Ottawa, Ontario Canada, KIA 0C8 5.4 FCC / INDUSTRY CANADA INFORMATION The following data pertaining to the transceiver is necessary to fill out the license application. Type Acceptance ......................................................................... FCC Part 80 Output Power ............................................... 1 Watt (low) and 25 Watts (high) Emission ......................................................................... 16K0G3E, 16K0G2B Frequency Range .................................................... 156.025 to 163.275 MHz FCC Type Number ................................................................... K6630283X3S Industry Canada Type Approval ............................................ 511B-30283X3S Page 6 GX5500S 6 FCC NOTICE NOTICE Unauthorized changes or modifications to this equipment may void compliance with FCC Rules. Any change or modification must be approved in writing by STANDARD HORIZON. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. GX5500S Page 7 7 GETTING STARTED 7.1 ABOUT VHF RADIO The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with some shore stations available between 161 and 163 MHz. The marine VHF band provides communications over distances that are essentially “line of sight” (VHF signals do not travel well through objects such as buildings, hills or trees). Actual transmission range depends much more on antenna type, gain and height than on the power output of the transmitter. On a fixed mount 25W radio transmission expected distances can be greater than 15 miles, for a portable 5W radio transmission the expected distance can be greater than 5 miles in “line of sight”. 7.2 SELECTING AN ANTENNA Marine antennas are made to radiate signals equally in all horizontal directions, but not straight up. The objective of a marine antenna is to enhance the signal toward the horizon. The degree to which this is accomplished is called the antenna’s gain. It is measured in decibels (dB) and is one of the major factors in choosing an antenna. In terms of effective radiated power (ERP), antennas are rated on the basis of how much gain they have over a theoretical antenna with zero gain. A 3 foot, 3dB gain antenna represents twice as much gain over the imaginary antenna. Typically a 3 foot 3dB gain stainless steel whip is used on a sailboat mast. The longer 8 foot 6dB fiberglass whip is primarily used on power boats that require the additional gain. 7.3 COAXIAL CABLE VHF antennas are connected to the transceiver by means of a coaxial cable – a shielded transmission line. Coaxial cable is specified by it’s diameter and construction. For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. For runs over 20 feet but less than 50 feet, the larger RG-8X or RG213/U should be used for cable runs over 50 feet RG-8X should be used. For installation of the connector onto the coaxial cable refer to the figure below. To get your coax cable through a fitting and into your boat’s interior, you may have to cut off the end plug and reattach it later. You can do this if you follow the directions that come with the connector. Be sure to make good soldered connections. Page 8 Adapter 1/16'' 3/4'' 3/4'' 1 1/8'' 1/8'' 3/8'' 5/8'' GX5500S 8 INSTALLATION 8.1 LOCATION The radio can be mounted at any angle. Choose a mounting location that: • is far enough from any compass to avoid any deviation in compass reading due to the speaker magnet • provides accessibility to the front panel controls • allows connection to a power source and an antenna • has nearby space for installation of a microphone hanger • the antenna must be mounted at least 3 feet from radio Note: To insure the radio does not affect the compass or radios performance is not affected by the antenna location, temporarily connect the radio in the desired location and: a. Examine the compass to see if the radio causes any deviation b. Connect the antenna and key the radio. Check to ensure the radio is operating correctly by requesting a radio check. 8.2 ELECTRICAL CONNECTIONS CAUTION Reverse polarity connections will damage the radio! Connect the power cord and antenna to the radio. Antenna and Power Supply connections are as follows (see Figure 1): Optional VH-310 Handset Optional HAIL/PA Horn Optional Speaker Optional CMP25 RAM+ Mic. GPS Navigation Receiver Ac Antenna ce ss o ry Water proof Deck Outlet C ab le Fuse Red Black Power Source Figure 1. General Installation 1. Mount the antenna at least 3 feet away from the radio. At the rear of the radio, connect the antenna cable. It must have a PL259 connector. RG-8/ U coaxial cable must be used if the antenna is 25 feet or more from the radio. RG58 cable can be used for distances less than 25 feet. GX5500S Page 9 2. Connect the red power wire to a 13.8 VDC ±20% power source. Connect the black power wire to a negative ground. 3. If an optional remote extension speaker is to be used, refer to section 3.3 for connections. 4. It is advisable to have a Certified Marine Technician check the power output and the standing wave ratio of the antenna after installation. 8.3 ACCESSORY CABLE Wire Color/Description WHITE - External Speaker (+) SHIELD - External Speaker (–) RED - PA Speaker (+) SHIELD - PA Speaker (–) GREEN - NMEA Ground BLUE- NMEA Input (+) GRAY-NMEA Output (+) Connection Examples Connect to external 4 Ohm audio speaker Connect to external 4 Ohm audio speaker Connect to external 4 Ohm PA speaker Connect to external 4 Ohm PA speaker Connect to NMEA (–) connection of GPS Connect to NMEA (+) output of GPS Connect to NMEA (+) input of GPS When connecting the PA speaker, external speaker or GPS navigation receiver, strip off about 1 inch (2.5 cm) of the specified wire’s insulation, then splice the ends together. PA Speaker -/* Shield Red JKL Blue NMEA OUT ( ) Green NMEA OUT ( ) Gray NMEA IN ( ) Shield DISTRESS White PULL OPEN GPS Receiver External Speaker Note: In some areas powerful AM Broadcast stations may be heard when in listen back mode. In this case the speaker wire will have to be changed to 2 conductor Shielded audio cable available from Radio Shack part number 278514. refer to image below for connections Shield of cable is not attached on PA Speaker end -/* JKL Red Bare DISTRESS PULL OPEN Page 10 Connect the bare wire from the GX5500S to one wire and to the shielded. Make Red and bare connections short as possible PA Speaker GX5500S • • • • The GPS must have the NMEA Output turned on and set to 4800 Baud in the setup menu. If there is a selection for parity select none. For further information on interfacing /setting up your GPS. Please contact the manufacturer of the GPS receiver. GX5500S can read NMEA-0183 version 2.0 or higher. The NMEA supported sentences are: Input: GLL, GGA, RMC and GNS (RMC sentence is recommended) Output: DSC and DSE (DSC sentences to Standard Horizon Plotter for Position Polling) If you have further inquires, please feel free to contact Product Support at: Phone: (800) 767-2450 Email: [email protected] GX5500S Page 11 8.4 CHECKING GPS CONNECTIONS After connections have been made between the GX5500S and the GPS, a small satellite icon will appear on the top right corner of the LCD display. To see additional GPS information press and hold the [H/L(NAV)] key until the GX5500S shows the SOG and COG. 8.5 CHANGING THE GPS TIME From the Factory the GX5500S shows GPS satellite time or UTC time when a optional GPS is connected. A time offset is needed to show the local time in your area. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Time Offset 2. Press the [ENT] key, then select “Time Offset” with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select time offset from UTC. See illustration below to find your off00:00 set time from UTC. If “00:00 00:00” is assigned, the time is the same as UTC (Universal Time Coordinated or GMT Greenwich Mean Time). 5. Press the [ENT] key to store the time offset. Radio Setup 6. Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. OFFSET TIME TABLE Page 12 GX5500S 8.6 CHANGING THE TIME LOCATION Set the radio show UTC time or local time with the offset inputted in section 8.5 CHANGING THE GPS TIME. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Time Display Display” in 2. Press the [ENT] key, then select “Time Radio Setup Setup” menu with the CHANNEL selector the “Radio knob. 3. Press the [ENT] key. UTC 4. Turn the CHANNEL selector knob to select “UTC UTC” or Local “Local Local.” 5. Press the [ENT] key to store the selected setting. Radio Setup 6. Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. 8.7 CHANGING COG TO TRUE OR MAGNETIC Allows the GPS Course Over Ground to be selected to show in True or Magnetic. Factory default is True however following the steps below the COG can be changed to Magnetic. 1. Press and hold down the [CALL(MENU)] key until Radio Setup Setup” menu appears. “Radio Magnetic 2. Press the [ENT] key, then select “Magnetic Magnetic” in the Radio Setup “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. Mag4. Turn the CHANNEL selector knob to select “Magnetic True netic” or “True True.” 5. Press the [ENT] key to store the selected setting. Radio Setup 6. Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. GX5500S Page 13 8.8 TREBLE AND BASE AUDIO TONE CONTROL Allows the treble and bass of the speaker audio to be adjusted for the best acoustics in noisy environments. The effect is similar to adjusting the treble and bass controls on a stereo. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Tone Control 2. Press the [ENT] key, then select “Tone Control” in Radio Setup the “Radio Setup” menu with the CHANNEL selector knob. Bass 3. Press the [ENT] key, then select “Bass Bass” with the CHANNEL selector knob. 4. Press the [ENT] key, then turn the CHANNEL selector knob to select desired audio responce in the – lower frequency range. Available selections are “– 6” through “+6 +6 +6.” 5. Press the [ENT] key to store the selected setting. Treble 6. Select “Treble Treble” with the CHANNEL selector knob. 7. Press the [ENT] key, then turn the CHANNEL selector knob to select desired audio responce in the – highr frequency range. Available selections are “– 6” through “+6 +6 +6.” 8. Press the [ENT] key to store the selected setting. Radio Setup 9. Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. Page 14 GX5500S 8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION 1. Make a rectangular template for the flush mount measuring 2.9” H x 8.1” W (72 x 205 mm). 2. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accommodate the transceiver (at least 6 inches deep). There should be at least 1/2 inch between the transceiver’s heatsink and any wiring, cables or structures. 3. Cut out the rectangular hole and insert the transceiver. 4. Fasten the brackets to the sides of the transceiver with the lock washer nut combination; so that the mounting screw base faces the mounting surface (see Figure 2). 5. Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface. Bracket Adjusting Screw Lock-washer nut combination Figure 2. MMB-84 Flush Mount Installation GX5500S Page 15 8.10 OPTIONAL CMP25 ENHANCED RAM+ SECOND STATION MIC OR VH-310 HANDSET INSTALLATION The GX5500S is capable of using a CMP25 Enhanced RAM+ mic or VH-310 Handset to remotely control the Radio, DSC and PA/Fog functions. In addition the GX5500S can operate as a full function intercom system. 1. Connect the Extension Cable to the Remote Mic eight pin connector on the rear panel, then tighten the Cable Nut (See Figure 3). 2. Referring to Figure 3, make a 1.2” (30 mm) hole in the wall, then insert the Extension Cable into this hole. Connect the Gasket and Mount Base to the Extension Cable Connector using the Nut. 3. Drill the four Screw holes (approx. 2 mm) on the wall, then install the Mounting Base to the wall using four screws. 4. Put the Rubber Cap on to the Nut. The installation is now complete. NOTE The routing cable can be cut and spliced, however care needs to be taken when reconnecting the wires to ensure water integrity. Before cutting the cable make sure it is not plugged into the radio. After cutting you will notice there are the following wires: Yellow, Green, Brown, Purple, Blue, Green, RedÚ, ShieldÚ Ú The red and shield wires are wrapped in foil. Remove the foil, and seperate the Red and shield wires. External Speaker Connections Gasket Cap Wall Routing Cable Mounting Bracket Nut Figure 3. Enhanced RAM+ MIC Installation Page 16 GX5500S Remote Mic or External Speaker Selection By default the RAM+ or VH-310 Handset internal speaker is turned on, however using the RAM+ mic (or VH-310 Handset) this speaker can be turned off so the external speaker can be used. RAM+ mic procedure 1. Press and hold the [CALL(SET)MENU] key. RADIO SETUP 2. Press the [S] or [T] key to select “RADIO SETUP.” 3. Press the [CALL(SET)MENU] key. EXT SPK 4. Press the [T] key to until “EXT SPK” is shown and press the [CALL(SET)MENU] key. oF 5. Press the [S ] or [T ] key to select “oF oF” (External speaker on off) or “on on” (External speaker on). 6. Press the [CALL(SET)MENU] key to save the selection. 7. Press the [16/9] key to exit this mode. VH-310 Procedure 1. Press and hold the [CALL(MENU)] key. RADIO SETUP 2. Press the [S] or [T] key to select “RADIO SETUP.” 3. Press the [ENT] key EXT SPK SPK” is shown and press the 4. Press the [T] key to until “EXT [ENT] key. oF 5. Press the [S ] or [T ] key to select “oF oF” (External speaker on off) or “on on” (External speaker on). 6. Press the [ENT] key to save the selection. 7. Press the [16/9] key to exit this mode. GX5500S Page 17 9 CONTROLS AND INDICATORS NOTE This section defines each control of the transceiver. See Figure 4 for location of controls. For detailed operating instructions refer to chapter 10 of this manual. 9.1 CONTROLS AND CONNECTIONS VOLUME CONTROL (VOL/PWR) Adjusting this control clockwise, increases the audio volume level. Secondary Use When in PA or Fog mode, controls the listen back volume. SQUELCH CONTROL (SQL) Adjusting this control clockwise, sets the point at which random noise on the channel does not activate the audio circuits but a received signal does. This point is called the squelch threshold. Further adjustment of the squelch control will degrade reception of wanted transmissions. MIC Connector Connects to the supplied noise canceling speaker microphone. KEYPAD [WX] Key Press the [WX] key immediately recalls the previously selected NOAA weather channel from any channel. Pressing the [WX] key again reverts to the previous selected working channel. Secondary use: Press the [WX] key while pressing and holding the [16/9] key to switch between USA, International and Canadian bands. [PWR] Key Turns the transceiver on and off. To turn the transceiver on, press and hold this key until the LCD turns on. To turn it off, press and hold this key until the LCD turns off. When the power is turned on, the transceiver is set to the last selected channel. [16/9] Key Press the [16/9] key immediately recalls channel 16 from any channel location. Holding down the [16/9] key recalls channel 9. Pressing the [16/9] key again reverts to the previous selected working channel. Secondary use: Press the [WX] key while pressing and holding the [16/9] key to switch between USA, International and Canadian bands. Page 18 GX5500S -/* JKL DISTRESS PULL OPEN Figure 4. Controls and Connectors GX5500S Page 19 [H/L] Key Press the [H/L] key to toggles between 25 W (High) and 1 W (Low) power. When the [H/L] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The [H/L] key does not function on transmit inhibited and low power only channels. CHANNEL SELECTOR KNOB Rotary knob used to select channels and to choose menu items (such as the DSC menu, Radio Setup and DSC Setup menu). The [ UP ( S )] / [DOWN(T)] keys on the microphone can also be used to select channels and menu items. Secondary Use y Press the [F] key first then press the [3(SCAN)] key, and turning the CHANNEL selector knob while holding down the [3(SCAN)] key, you can confirm memory channels for scanning. y Adjusts the PA output level while in PA/FOG mode. KEYPAD [1(DIM)] Key When in radio mode, this key is used to directly select channel digit “1” in a channel number. Secondary use Press the [F] key first then press the [1(DIM)] key, access the LCD Dimmer menu. Refer to section “10.16 LCD DIMMER” for details. [2(MEM)] Key When in radio mode, this key is used to directly select channel digit “2” in a channel number. Secondary use Press the [F] key first then press the [2(MEM)] key, memorize the selected channel into the transceiver scan memory for scanning. When repeat the same procedures ([F] Æ [2(MEM)]), DELETES the channel from the scan memory. Refer to section “10.13 SCANNING” for details. [3(SCAN)] Key When in radio mode, this key is used to directly select channel digit “3” in a channel number. Secondary use (Depends on the transceiver version) Press the [F] key first then press the [3(SCAN)] key, start and stop the scanning of programmed channels. Refer to section “10.13 SCANNING” for details. Page 20 GX5500S [4(DW)] Key When in radio mode, this key is used to directly select channel digit “4” in a channel number. Secondary use Press the [F] key first then press the [4(DW)] key, scan for voice communications on the priority channel and another selected channel until a signal is received on either channel (Dual Watch). Refer to section “10.12 DUAL WATCH (TO PRIORITY CHANNEL)” for details. [5(IC)] Key When in radio mode, this key is used to directly select channel digit “5” in a channel number. Secondary use Press the [F] key first then press the [5(IC)] key, when the optional RAM+ Mic is connected, intercom operation will operate between radio and RAM+ Mic. Refer to section “10.17 INTERCOM OPERATION” for details. [6(NAV)] Key When in radio mode, this key is used to directly select channel digit “6” in a channel number. Secondary use Press the [F] key first then press the [6(NAV)] key, the LCD displays NAV GPS Data; Time, SOG (Speed Over Ground), and COG (Course Over Ground) when a GPS is connected to the accessory cable of the GX3500S. See section “8.4 CHECKING GPS CONNECTION” for details. [7(SCRM)] Key When in radio mode, this key is used to directly select channel digit “7” in a channel number. Secondary use Press the [F] key first then press the [7(SCRM)] key, when the optional CVS2500 Voice Scrambler Unit is installed, available to operate the Voice Scrambler function. Refer to section “10.18 VOICE SCRAMBLER” for details. [8(PA)] Key When in radio mode, this key is used to directly select channel digit “8” in a channel number. Secondary use Press the [F] key first then press the [8(PA)] key, available to operate the 30 Watt PA function. Refer to section “10.14 PA/FOG OPERATION” for details. GX5500S Page 21 [9(FOG)] Key When in radio mode, this key is used to directly select channel digit “9” in a channel number. Secondary use Press the [F] key first then press the [9(FOG)] key, available to operate the Fog Horn function. Refer to section “10.14 PA/FOG OPERATION” for details. [0] Key When in radio mode, this key is used to directly select channel digit “0” in a channel number. [CLR] Key Press the [CLR] Key to cancel the menu selection and/or keypad entry. [ENT] Key Press the [ENT] Key to determine the menu selection and/or keypad entry. [CALL(MENU)] Key Press the [CALL(MENU)] key to access the DSC OPERATION menu. INDIVIDUAL CALL GROUP CALL ALL SHIPS CALL The “INDIVIDUAL CALL,” “GROUP CALL,” and “ALL CALL” functions can be accessed from the DSC OPERATION menu. Secondary use Radio Setup Press and hold the [CALL(MENU)] key to access the “Radio Setup” (reDSC Setup fer to section “12 RADIO SETUP MODE”) or “DSC Setup” menu (refer to section “11 DIGITAL SELECTIVE CALLING”). RADIO SETUP menu Contrast Time Offset Time Display SOG Unit Magnetic Priority CH SCAN Type SCAN Resume Key Beep Weather Alert CH Name Unit Name Tone Control FOG Frequency Calendar DSC SETUP menu Individual Directory Individual Reply Individual Ack Individual Ringer Group Directory Position Reply Position InputÚ DSC Beep User MMSI Ú: Only shown when a GPS is not connected. [F] Key Press the [F] key to activate the “Alternate” key function. [DISTRESS] Key Used to send a DSC Distress Call. To send the distress call refer to section “11.3.1 Transmitting a DSC Distress Call.” Page 22 GX5500S ACCESSORY CONNECTION CABLE Connects the GX5500S to a GPS, a PA speaker, and an external speaker. See section “3 OPTIONS” for a list of optional STANDARD HORIZON Speakers. DC INPUT CABLE Connects the radio to a DC power supply capable of delivering 12 to 16V DC. FRONT PANEL REMOTE MIC Connector Connects the supplied Hand Microphone if desired. This connnector is used to remote the Front panel speaker mic using the optional MEK-4 Microphone Extension Kit. 2 front panel microphones to the front mic jack and the rear panel mic connector at the same time. RAM+ MIC CONNECTORS Connects the GX5500S to the enhanced RAM+ MIC (Remote Access Microphone) or the VH-310 Handset. Refer to section “13 ENHANCED RAM+ MIC OPERATION” or “14 VH-310 HANDSET OPERATION” for details. ANTENNA JACK Connects an antenna to the transceiver. Use a marine VHF antenna with an impedance of 50 ohms. PTT (Push-To-Talk) SWITCH Keys the transmitter when the transceiver is in radio mode. If the transceiver is in the intercom operation mode (between the RAM+ and the GX5500S), it activates the GX5500S microphone for voice communications. MICROPHONE Transmits the voice message with reduction of background noise, using Clear Voice Noise Reduction Technology. MICROPHONE SPEAKER The same audio heard through internal radio speaker is heard through microphone speaker. [UP(S)] / [DOWN(T)] KEYS The [UP(S)] and [DOWN(T)] on the microphone function the same as the CHANNEL selector knob on the front panel of the transceiver. [16/9] Key Pressing the [16/9] key immediately recalls channel 16 from any location. Press and hold the [16/9] key to recall channel 9. Pressing the [16/9] key again will revert the radio to the previous selected channel. GX5500S Page 23 10 BASIC OPERATION 10.1 PROHIBITED COMMUNICATIONS The FCC prohibits the following communications: • False distress or emergency messages: • Messages to “any boat” except in emergencies and radio tests; • Messages to or from a vessel on land; • Transmission while on land; • Obscene, indecent, or profane language (potential fine of $10,000). 10.2 RECEPTION 1. After the transceiver has been installed, ensure that the power supply and antenna are properly connected. 2. Press and hold the PWR key until the radio turns on. 3. Turn the SQL knob fully counterclockwise. This state is known as “squelch off”. 4. Turn up the VOL knob until noise or audio from the speaker is at a comfortable level. 5. Turn the SQL knob clockwise until the random noise disappears. This state is known as the “squelch threshold.” 6. Turn the CHANNEL selector knob to select the desired channel. Refer to the channel chart on page 91 for available channels. 7. The keypad on the front may be used to directly select channels. Example to select channel 68: 1. Press [6(NAV)] 2. Press [8(PA)] 3. Press [ENT] In the USA and Canadian modes, press and hold in the [0] key to select the “A” channel. Example to select channel 22A: 1. Press [2(MEM)] 2. Press [2(MEM)] 3. Press [0] until “A” appears to the right of the channel number 4. Press [ENT] 8. When a message is received, adjust the volume to the desired listening level. The “ ” indicator in the LCD is displayed indicating that the channel is being used. Page 24 GX5500S 10.3 TRANSMISSION 1. Perform steps 1 through 6 of RECEPTION. 2. Before transmitting, monitor the channel to ensure it is clear. THIS IS AN FCC REQUIREMENT! 3. Press the PTT (push-to-talk) switch. The “ ” indicator on the LCD is displayed. 4. Speak slowly and clearly into the microphone. 5. When the transmission is finished, release the PTT switch. NOTE This is a noise-canceling microphone. Position the Oval Slot label “MIC” within 1 inch (2.5 cm) from the mouth for optimum performance. 10.4 TRANSMIT TIME - OUT TIMER (TOT) When the PTT switch on the microphone is held down, transmit time is limited to 5 minutes. This limits unintentional transmissions due to a stuck microphone. About 10 seconds before automatic transmitter shutdown, a warning beep will be heard from the speaker(s). The transceiver will automatically go to receive mode, even if the PTT switch is continually held down. Before transmitting again, the PTT switch must first be released and then pressed again. 10.5 SIMPLEX/DUPLEX CHANNEL USE Refer to the VHF MARINE CHANNEL CHART (page 91) for instructions on use of simplex and duplex channels. NOTE All channels are factory-programmed in accordance with FCC (USA), Industry Canada (Canada), and International regulations. Mode of operation cannot be altered from simplex to duplex or vice-versa. 10.6 USA, CANADA, AND INTERNATIONAL MODE 1. To change the modes, hold the [16/9] key and press the [WX] key. The mode changes from USA to International to Canadian with each press of the [WX] key. 2. “USA” will be displayed on the LCD for USA mode, “INTL” will be displayed for International mode, and “CAN” will be displayed for Canadian mode. 3. Refer to the VHF MARINE CHANNEL CHART (page 91) for allocated channels in each mode. GX5500S Page 25 10.7 NOAA WEATHER CHANNELS 1. To receive a NOAA weather channel, press the [WX] key from any channel. The transceiver will go to the last selected weather channel. 2. Turn the CHANNEL selector knob on the radio or [UP(S)] / [DOWN(T)] keys on the microphone to select a different NOAA weather channel. 3. To exit from the NOAA weather channels, press the [WX] key. The transceiver returns to the channel it was on prior to a weather channel. 10.7.1 NOAA Weather Alert In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels. When the Weather Alert feature is enabled (see section “12.10 WEATHER ALERT (ON/OFF)”), the transceiver is capable of receiving this alert if the following is performed: 1. Program NOAA weather channels into the transceiver’s memory for scanning. Follow the same procedure as for regular channels under section “10.13.2 Memory Scanning (M-SCAN).” 2. Press the [SCAN] key once to start memory scanning. 3. The programmed NOAA weather channels will be scanned along with the regular-programmed channels. However, scanning will not stop on a normal weather broadcast unless a NOAA alert is received. 4. When an alert is received on a NOAA weather channel, scanning will stop and the transceiver will emit a loud beep to alert the user of a NOAA broadcast. 5. Press the [WX] key to stop the alert tone and receive the weather report. NOTE If the [WX] key is not pressed the alert tone will be emitted for 5 minutes and then the weather report will be received. NOTE The Weather Alert feature is also engaged while the transceiver is receiving on one of the NOAA weather channels. 10.7.2 NOAA Weather Alert Testing NOAA tests the alert system ever Wednesday between 11AM and 1PM. To test the GX5500S’s NOAA Weather feature, on Wednesday between 11AM and 1PM, setup as in section “10.7.1 NOAA Weather Alert” and confirm the alert is heard. Page 26 GX5500S 10.8 EMERGENCY (CHANNEL 16 USE) Channel 16 is known as the Hail and Distress Channel. An emergency may be defined as a threat to life or property. In such instances, be sure the transceiver is on and set to CHANNEL 16. Then use the following procedure: 1. Press the microphone push-to-talk switch and say “Mayday, Mayday, Mayday. This is , , ” (your vessel’s name). 2. Then repeat once: “Mayday, ” (your vessel’s name). 3. Now report your position in latitude/longitude, or by giving a true or magnetic bearing (state which) to a well-known landmark such as a navigation aid or geographic feature such as an island or harbor entry. 4. Explain the nature of your distress (sinking, collision, aground, fire, heart attack, life-threatening injury, etc.). 5. State the kind of assistance your desire (pumps, medical aid, etc.). 6. Report the number of persons aboard and condition of any injured. 7. Estimate the present seaworthiness and condition of your vessel. 8. Give your vessel’s description: length, design (power or sail), color and other distinguishing marks. The total transmission should not exceed 1 minute. 9. End the message by saying “OVER”. Release the microphone button and listen. 10. If there is no answer, repeat the above procedure. If there is still no response, try another channel. 10.9 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) Channel 16 may be used for initial contact (hailing) with another vessel. However, its most important use is for emergency messages. This channel must be monitored at all times except when actually using another channel. It is monitored by the U.S. and Canadian Coast Guards and by other vessels. Use of channel 16 for hailing must be limited to initial contact only. Calling should not exceed 30 seconds, but may be repeated 3 times at 2-minute intervals. In areas of heavy radio traffic, congestion on channel 16 resulting from its use as a hailing channel can be reduced significantly in U.S. waters by using channel 9 as the initial contact (hailing) channel for non-emergency communications. Here, also, calling time should not exceed 30 seconds but may be repeated 3 times at 2-minute intervals. Prior to making contact with another vessel, refer to the channel charts in this manual, and select an appropriate channel for communications after initial contact. For example, Channels 68 and 69 of the U.S. VHF Charts are some of the channels available to non-commercial (recreational) boaters. Monitor your desired channel in advance to make sure you will not be interrupting other GX5500S Page 27 traffic, and then go back to either channel 16 or 9 for your initial contact. When the hailing channel (16 or 9) is clear, state the name of the other vessel you wish to call and then “this is” followed by the name of your vessel and your Station License (Call Sign). When the other vessel returns your call, immediately request another channel by saying “go to,” the number of the other channel, and “over.” Then switch to the new channel. When the new channel is not busy, call the other vessel. After a transmission, say “over,” and release the microphone’s push-to-talk (PTT) switch. When all communication with the other vessel is completed, end the last transmission by stating your Call Sign and the word “out.” Note that it is not necessary to state your Call Sign with each transmission, only at the beginning and end of the contact. Remember to return to Channel 16 when not using another channel. Some radios automatically monitor Channel 16 even when set to other channels or when scanning. 10.10 MAKING TELEPHONE CALLS To make a radiotelephone call, use a channel designated for this purpose, The fastest way to learn which channels are used for radiotelephone traffic is to ask at a local marina. Channels available for such traffic are designated Public Correspondence channels on the channel charts in this manual. Some examples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call the marine operator and identify yourself by your vessel’s name, The marine operator will then ask you how you will pay for the call (telephone credit card, collect, etc.) and then link your radio transmission to the telephone lines. The marine telephone company managing the VHF channel you are using may charge a link-up fee in addition to the cost of the call. 10.11 OPERATING ON CHANNELS 13 AND 67 Channel 13 is used at docks and bridges and by vessels maneuvering in port. Messages on this channel must concern navigation only, such as meeting and passing in restricted waters. Channel 67 is used for navigational traffic between vessels. By regulation, power is normally limited to 1 Watt on these channels. Your radio is programmed to automatically reduce power to this limit on these channels. However, in certain situations it may be necessary to temporarily use a higher power. See page 20 ([H/L] key) for means to temporarily override the low-power limit on these two channels. Page 28 GX5500S 10.12 DUAL WATCH (TO CH16) 1. Adjust the SQL knob until the background noise disappears. 2. Select the channel you wish to dual watch to CH16. 3. Press the [F] key followed by the [4(DW)] key. The display will scan between CH16 and the channel that was selected in step 2. If a transmission is received on the channel selected in step 2, the GX5500S will dual watch to CH16. 4. To stop Dual Watch press the [F] key followed by the [4(DW)] key again. 10.13 SCANNING Allows the user to select the scan type from Memory scan or Priority scan. “Memory scan” scans the channels that were programmed into memory. “Priority scan” scans the channels programmed in memory with the priority channel. 10.13.1 Selecting the Scan Type 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. SCAN Type 2. Press the [ENT] key, then select “SCAN Type” in the Radio Setup “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. Priority 4. Turn the CHANNEL selector knob to select “Priority SCAN Memory SCAN SCAN” or “Memory SCAN.” 5. Press the [ENT] key to store the selected setting. Radio Setup 6. Press the [CLR] key to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. 10.13.2 Memory Scanning (M-SCAN) 1. Adjust the SQL knob until background noise disappears. 2. Select a desired channel to be scanned using the CHANNEL selector knob. Press the [ F] key followed by the [2 (MEM)] key, “MEM” appears on the LCD which indicates the channel has been programmed into the transceivers memory. 3. Repeat step 2 for all the desired channels to be scanned. 4. To DELETE a channel from the transceiver’s memory, select the channel then press the [F] key followed by the [2(MEM)] key, “MEM” will disappears from the LCD. GX5500S Page 29 5. To start scanning, press the [ F] key followed by the [ 3 ( SCAN )] key, “M-SCAN” appears on the LCD. Scanning will proceed from the lowest to the highest programmed channel number and will stop on a channel when a transmission is received. 6. The channel number will blink during reception. 7. To stop scanning, press the [CLR], [16/9], or [WX] key. 10.13.3 Priority Scanning (P-SCAN) In the default setting, Channel 16 is set as the priority channel. You may change the priority channel to the desired channel from the Channel 16 by the Radio Setup Mode, refer to section “10.13.1 Selecting the Scan Type,” and “12.6 PRIORITY CHANNEL SET.” 1. Adjust the SQL knob until background noise disappears. 2. Select a desired channel to be scanned using the CHANNEL selector knob. Press the [ F] key followed by the [2 (MEM)] key, “MEM” will appear on the display which indicates the channel has been programmed into the transceivers memory. 3. Repeat step 2 for all the desired channels to be scanned. 4. To DELETE a channel from the transceiver’s memory, select the channel then press the [F] key followed by the [2(MEM)] key, “MEM” is removed from the display. 5. To start priority scanning, press the [F] key followed by the [3(SCAN)] key. “P-SCAN” appears on the LCD. Scanning will proceed between the memorized channels and the priority channel. The priority channel will be scanned after each programmed channel. 6. To stop scanning, press the [CLR], [16/9], or [WX] key. You may change the scan resume time in the Radio Setup Mode, refer to section “12.8 SCAN RESUME TIME.” Page 30 GX5500S 10.14 PA/FOG OPERATION The GX5500S has a 30W Hailer built-in and can be used with any 4 Ohm PA Horns. Standard Horizon offers a small and a large PA horn called the 220SW and 240SW. When in Hail mode the PA speaker Listen’s Back (acts as a microphone and sends sound to the front panel speaker and the speaker mic) through the PA horn speaker which provides two-way communications through the PA horn speaker. NOTE When in PA or FOG mode the GX5500S will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls. NOTE in some areas powerful AM Broadcast stations may be heard when in listen back mode. In this case the speaker wire will have to be changed to 2 conductor Shielded audio cable available from Radio Shack part number 278-514. refer to section “8.3 ACCESSORY CABLE.” PA HAIL mode: PA HAIL mode allows the transceiver to be used as a power hailer when an optional STANDARD HORIZON 220SW or 240SW HAIL/PA speaker is installed. The Hail mode has a listen-back feature which provides two way communication through the HAIL/PA speaker. FOG HORN mode: Automatic signaling is transmitted through the HAIL/PA speaker. When the Fog horn, Bells or Whistle signal is not being outputted the GX5500S listens back through the connected PA Horn speaker. 10.14.1 Operating the PA HAIL mode 1. Press the [F] key followed by the [2(MEM)] key, activate the PA HAIL mode. 2. Press the PTT switch to speak through the HAIL/PA speaker. Rotate the CHANNEL selector knob to control the AF output level. The AF output level can be set from 0 to 30 watts. 3. When the fog signal is not outputted, rotate the VOL knob to adjust listen back volume. 4. To exit the PA HAIL mode, press the [CLR] key. GX5500S Page 31 10.14.2 Operating the FOG HORN mode Operator can select from Underway, Stop, Sail, Tow, Aground, Anchor, Horn and Siren. Refer to the Fog Horn Timing Chart on the next page. 1. Press the [F] key followed by the [9(FOG)] key. 2. Turn the CHANNEL selector knob to select the one of the eight functions described above. 3. Press the [ENT] key. 4. On the HORN and SIREN modes, press the PTT switch to activate the tone through the HAIL/PA speaker. Rotate the CHANNEL selector knob to control the AF output level. The AF output level can be set from 0 to 30 watts. 6. When the fog signal is not outputted, rotate the VOL knob to adjust listen back volume. 7. To exit the FOG HORN mode, press the [CLR] key. 10.15 DISPLAY SOG AND COG INFORMATION The transceiver has the ability to display the time, SOG and COG date, as well as the vessel’s position (LAT/LON), when connected to a GPS receiver. 1. Press the [F] key followed by the [6(NAV)] key to display SOG and COG information. 2. To hide SOG and COG information, press the [F] key followed by the [6(NAV)] key again. 10.16 LCD DIMMER Allows setting up the backlight intensity or to turn it off. 1. Press the [F] key followed by the [1(DIM)] key to enabling the setting up the backlight intensity. 2. Turn the CHANNEL selector knob to select the desired backlight intensity. 3. Press the [CLR] key the mode will revert to “Radio” mode. Page 32 GX5500S FOG HORN TIMING CHART TYPE UNDERWAY PATTERN One 5-second blasts every 120 seconds. USAGE Motor vessel underway and making way. Listen Back 120s STOP Two 5-second blasts (separated by 2 seconds) every 120 seconds. 5s Motor vessel underway but stopped (not making way). 5s Listen Back 2s 2s 120s SAIL One 5-second blasts followed by two 1second blasts (separated by 2 seconds) every 120 seconds. 1s 1s 1s 1s Listen Back 2s 2s 2s 2s 120s TOW One 5-second blasts followed by three 1second blasts (separated by 2 seconds) every 120 seconds. 1s 1s 1s Sailing vessel underway, fishing vessel (underway or anchored), vessel not under command, a vessel restricted in her ability to maneuver (underway or at anchor), or a vessel towing or pushing another ahead. Vessel under tow (manned). 1s 1s 1s Listen Back 2s 2s 2s 2s 2s 2s 120s AGROUND One 11-second rings every 60 seconds. Vessel is aground. Listen Back 60s ANCHOR One 5-second rings every 60 seconds. Vessel is at anchor. Listen Back 60s GX5500S Page 33 10.17 INTERCOM OPERATION Connecting a CMP25 RAM+ or VH-310 Handset to the GX5500S allows intercom communications. Refer to section “13.2 INTERCOM OPERATION” for CMP25 RAM+ Microphone or section “14.2 INTERCOM OPERATION” for VH310 Handset. 10.17.1 Communication 1. Press and hold the [5(IC)] key while in the “Radio” mode, the mode is changed to “Intercom” mode. 2. If your GX5500S is equipped two RAM+ Mic’s (or VH-310 Handset), select the companion you wish RAM1 to communicate (RAM1 RAM1, RAM2 RAM2, or ALL ALL) with the CHANNEL selector knob, then press the [ENT] key. Inter3. When the “Intercom” operation is activated, “Intercom com” is displayed on the GX5500S, and “IC” is displayed on the CMP25 RAM+ or VH-310 Handset. Talk 4. Press the PTT switch. “Talk Talk” will be shown on the display. NOTE: A warning beep will be emitted when the GX5500S microphone’s PTT switch is pressed while the (GX5500S’s PTT switch is pressed) RAM+ Mic’s PTT switch is pressed. 5. Speak slowly and clearly into the microphone, hold the microphone about 1/2 inch away from your mouth. 6. When finished, release the PTT (Second Station Mic’s PTT switch is pressed) switch. 7. Press the [CLR] key the mode will revert to “Radio” mode. M EM WX 16 9 -/* IC SCA N DW CALL S ET N AV M EM WX 16 9 MEN U -/* JKL DIST RESS P U LL OP E N P ULL OP E N QUANTUM Ù RAM 1 Page 34 IC ME M SCA N DW WX CALL S ET NAV 16 9 MEN U -/* JKL DISTRESS QUANTUM Ù RAM 2 RAM 2 RAM 1 IC SCAN DW WX CALL SET NAV 16 9 U .I.C N AV ME NU RAM 2 RAM 1 U.I.C IC DW CALL SET U.I.C MEM SC AN RAM 2 RAM 1 U .I.C RAM 2 RAM 1 M EN U -/* JKL J KL DIST RES S DIST RES S P ULL OP EN PU LL OPE N RAM 1 Ù RAM 2 ALL GX5500S 10.17.2 Calling Hold down the [5(IC)] key when the “Intercom” mode is activated to send a calling beep to the RAM+ or VH-310 remote mic. NOTE When both RAM+ microphones (or VH-310 Handsets) are set to intercom mode, the GX5500S will be temporarily disabled until the remote mics exit the intercom mode. 10.18 VOICE SCRAMBLER If privacy of communications is desired, an optional CVS2500 4 code voice scrambler (VS) can be installed in the transceiver. Contact your Dealer to have a CVS2500 installed. 1. Turn the CHANNEL selector knob to select the channel to be scrambled. Note: Channel 16 and 70 can not operate the voice scrambler. 2. Press the [F] key followed by the [7(SCRM)] key, VS the voice scrambler is activated. “VS VS” and scram0,” “1 1,” “2 2,” or “3 3”) will appear on the bler number (“0 LCD. 3. Press the [F] key, then press and hold down the [7(SCRM)] key until “Scrambler Scrambler Scrambler” menu appears. 4. Turn the CHANNEL selector knob to change the scrambler code. The scrambler code can be set from 0” to “3 3.” “0 5. Press the [ENT] key to save the scrambler code and return to radio operation mode (with voice scrambler). 6. Monitor the channel before transmitting. 7. To disable the voice scrambler, press the [F] key followed by the [7(SCRM)] VS 0,” “1 1,” “2 2,” or “3 3”) disappear from key again. “VS VS” and scrambler number (“0 the LCD. GX5500S Page 35 11 DIGITAL SELECTIVE CALLING 11.1 GENERAL WARNING This radio is designed to generate a digital maritime distress and safety call to facilitate search and rescue. To be effective as a safety device, this equipment must be used only within communication range of a shorebased VHF marine channel 70 distress and safety watch system. The range of signal may vary but under normal conditions should be approximately 20 nautical miles. NOTE A DSC Warning sticker is included with the GX5500S. To comply with FCC regulations this sticker must be mounted in a location that can be easily viewed from the location of the GX5500S. WARNING STICKER -/ * J KL DI STRES S P UL L OPE N Digital Selective Calling is a semi-automated method of establishing a radio call, it has been designated by the International Maritime Organization (IMO) as an international standard for establishing VHF, MF and HF radio calls. It has also been designated as part of the Global Maritime Distress and Safety System (GMDSS). It is planned that DSC will eventually replace aural watches on distress frequencies and will be used to announce routine and urgent maritime safety information broadcasts. This new system allows mariners to instantly send a distress call with GPS position (when connected to the transceiver) to the US Coast Guard and other vessels within range of the transmission. DSC will also allow mariners to initiate or receive Distress, Urgency, Safety, Routine, POSITION REQUEST, POSITION SEND, and Group calls to or from another vessel equipped with a DSC transceiver. 11.2 MARITIME MOBILE SERVICE IDENTITY (MMSI) 11.2.1 What is an MMSI? An MMSI is a nine digit number used on Marine Transceivers capable of using Digital Selective Calling (DSC). This number is used like a telephone number to selectively call other vessels. Page 36 GX5500S THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE THE GX5500S DSC FUCTIONS. How can I obtain an MMSI assignment? In the USA, visit the following websites to register: http://www.boatus.com/mmsi/ or www.seatow.com/boatingsafety/mmsiinfo.htm. In the Canada, visit http://strategis.ic.gc.ca/epic/site/smt-gst.nsf/vwapj/cpc_2307e.pdf/$FILE/ cpc_2307e.pdf 11.2.2 Programming the MMSI WARNING A user MMSI can be inputted only once. Therefore please be careful not to input the incorrect MMSI number. If the user needs to change the MMSI number after it has been entered, the radio will have to be returned to Factory Service. Refer to the section “15.2. FACTORY SERVICE.” 1. Press and hold down the [CALL(MENU)] key Radio Setup until the “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to the left to DSC Setup select “DSC Setup” menu. [ User MMSI 3. Press the ENT] key, then select “User MMSI” with the CHANNEL selector knob. 4. Press the [ENT] key. 5. Turn the CHANNEL selector knob or press the [UP(S)] / [DOWN(T)] key on the microphone to select the first number of your MMSI, then press the [ENT] key to step to the next number. 6. Repeat step 5 to set your MMSI (nine digits). 7. When finished programming the number, press and hold the [ENT] key. Appears the confirmation message on the display. Set your MMSI again, then press and hold the [ENT] key. 8. Press the [ ENT] key to store the number in memory. Ra9. Press the [CLR] key twice to return to the “Radio Setup Setup” menu, then press the [ CLR ] key again to return to radio operation. GX5500S Page 37 11.3 DSC DISTRESS CALL The GX5500S is capable of transmitting and receiving DSC Distress messages to all DSC radios. The GX5500S may be connected to a GPS to also transmit the Latitude, Longitude of the vessel. 11.3.1 Transmitting a DSC Distress Call NOTE To be able to transmit a DSC distress call an MMSI number must be programmed, refer to section “11.2.2 Programming the MMSI.” In order for your ships location to be transmitted a GPS must be connected to the GX5500S, refer to section “8.3 ACCESSORY CABLE.” 1. Lift the red spring loaded DISTRESS cover and DISTRESS ALERT press the [DISTRESS] key. The “DISTRESS ALERT” menu will appear on the LCD. 2. Press and hold the [DISTRESS] key. The radios display will count down (5-4-3-2-1) and then transmit the Distress call. The backlight of the LCD and keypad flashes while the radios display is countdown. ” 3. When the distress signal is sent, CH70 and “ icon will appear on the LCD. 4. The transceiver “shadow-watches” for a transmission between CH16 and CH70 until an acknowledgment signal is received. “DISTRESS” and “WAITING” will appear on the LCD. 5. If an acknowledgement is received, select channel 16 and advise your distress situation. 6. If no acknowledgment is received, the distress call is repeated in 4 minute intervals until an acknowledgment is received. 7. When a DSC Distress acknowledgment is received, a distress alarm sounds and channel 16 is automatically selected. The LCD shows the MMSI of the ship responding to your distress. RECEIVED ACK: acknowledgment signal is received. RECEIVED RLY: relay signal is received from another vessel or coast station. 8. To cancel the DSC distress alarm signal from the speaker, press any key. Page 38 GX5500S Transmitting a DSC Distress Alert with Nature of Distress The GX5500S is capable of transmitting a DSC Distress Alert with the following “Nature of Distress” categories: Undesignated, Fire, Flooding, Collision, Grounding, Capsizing, Sinking, Adrift, Abandoning, Piracy, MOB 1. Lift the red spring loaded DISTRESS cover and DISTRESS ALERT press the [DISTRESS] key. The “DISTRESS ALERT” menu will appear on the LCD. 2. Turn the CHANNEL selector knob to select the desired nature of distress category. 3. When the GX5500S is connected the GPS receiver, to skip to step 4. When the GX5500S is not connected the GPS receiver, you may send the Latitude/Longitude of your vessel manually, if desired. a. Press the [ENT] key twice. The display will be as shown in the illustration on the right. b. Enter your local time from the keypad by the 24hour system on the UTC time, then press the [ENT] key. c. Enter the Latitude/Longitude of your vessel location by the keypad, then press the [ENT] key. To select North (N) press [6(NAV)] key, South (S) press the [7(SCRM)] key, East (E) press the [3(SCAN)] key or West (W) press the [9(FOG)] key. d. To store the data entered, press and hold the [ENT] key. 4. Press and hold the [DISTRESS] key. The radios display will count down (5-4-3-2-1) and then transmit the Distress call. The backlight of the LCD and keypad flashes while the radios display is countdown. 5. When the distress signal is sent, CH70 and “ ” icon will appear on the LCD. 6. The transceiver will watch for a DSC acknowledgment transmission on CH70 and also receive calls on CH16. 7. When a DSC Distress acknowledgment is received, a distress alarm sounds and channel 16 is automatically selected. The LCD shows the MMSI of the ship responding to your distress. RECEIVED ACK: acknowledgment signal is received. RECEIVED RLY ACK: relay acknowledgment signal is received from another vessel or coast station. 8. To cancel the DSC Distress alarm signal from the speaker, press any key. GX5500S Page 39 Cancel a DSC Distress Call If a DSC Distress call was sent by error the GX5500S allows you to send a message to other vessels to cancel the Distress Call that was made in error. Press the [CLR] key, then press the [ENT] key. 11.3.2 Receiving a DSC Distress Call 1. When a DSC Distress call is received, an emergency alarm sounds. Then channel 16 is automatically selected. 2. Press any key to stop the alarm. 3. The LCD shows the position of the vessel in distress. 4 If the position of the vessel distress data does not include position, the LCD will show the display on the right. NOTE You must continue monitoring channel 16 as a coast station may require assistance in the rescue attempt. 11.4 ALL SHIPS CALL The All Ships Call function allows contact to be established with other vessel stations without having their ID in the individual calling directory. Also, priority for the call can be designated as Urgency or Safety. URGENCY Call: This type of call is used when a vessel may not truly be in distress, but have a potential problem that may lead to a distress situation. This call is the same as saying PAN PAN PAN on channel 16. SAFETY Call: Used to transmit boating safety information to other vessels. This message usually contains information about an overdue boat, debris in the water, loss of a navigation aid or an important meteorological message. This call is the same as saying Securite, Securite, Securite.” Page 40 GX5500S 11.4.1 Transmitting an All Ships Call DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. All 2. Turn the CHANNEL selector knob to select “All Ships Ships.” 3. Press the [ ENT ] key. (To cancel, turn the Exit CHANNEL selector knob to select “Exit Exit.”) 4. Turn the CHANNEL selector knob to select the Urgency Safety nature of call (“Urgency Urgency” or “Safety Safety”), then press the [ENT] key. 5. Press the [ENT] key again to transmit the selected type of all ships DSC call. 6. After the All Ships Call is transmitted, the transceiver will switch to CH16. 7. Listen to the channel to make sure it is not busy, then key the microphone and say PAN PAN PAN or “Securite, Securite, Securite” depending on the priority of the call. Then announce your call sign and announce the channel you wish to switch to for communications. 11.4.2 Receiving an All Ships Call 1. When an all ships call is received, an emergency alarm sounds. The radio will automatically change to channel 16. The LCD shows the MMSI of the vessel transmitting the All Ships Call. 2. Press any key to stop the alarm. 3. Monitor channel 16 or traffic channel until the URGENCY voice communication is completed. 11.5 INDIVIDUAL CALL This feature allows the GX5500S to contact another vessel with a DSC VHF radio and automatically switch the receiving radio to a desired communications channel. This feature is similar to calling a vessel on CH16 and requesting to go to another channel (switching to the channel is private between the two stations). 11.5.1 Setting up the Individual / Position Call Directory The GX5500S has a DSC directory that allows you to store a vessel or person’s name and the MMSI number associated with vessels you wish to transmit Individual calls, Position Requests and Position Send transmissions. To transmit an Individual call you must program this directory with information GX5500S Page 41 of the persons you wish to call, similar to a cellular phones telephone directory. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. Individual Di3. Press the [ENT] key, then select “Individual rectory rectory” with the CHANNEL selector knob. 4. Press the [ENT] key. Add 5. Select “Add Add” with the CHANNEL selector knob, then press the [ENT] key. 6. Press the one of the Keypad keys to enter the first letter of the name of the vessel or person you want to reference in the directory. Example: Press the [ 2(MEM )] key repeatedly to toggle among the seven available characters associated with that key: 2 Æ A Æ B Æ C Æ a Æ b Æ c Æ 2 .... If a mistake was made entering in the name, pressing the [CLR] key to delete the wrong character. 7. Press the [ENT] key to store the first letter in the name and step to the next letter to the right. 8. Repeat step 6 and 7 until the name is complete. The name can consist of up to eleven characters, if you do not use all eleven characters press the [ENT] key to move to the next space. This method can also be used to enter a blank space in the name. If a mistake was made entering in the name repeat pressing the [H/L] key until the wrong character is selected, then enter the correct character. 9. After the eleventh letter or space has been entered, press and hold the [ENT] key to advance to the MMSI (Maritime Mobile Service Identity Number) number entry. 10. Enter the desired number by the keypad. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 11. To store the data entered, press and hold the [ENT] key. 12. To enter another individual address, repeat steps 5 through 11. Radio Setup 13. Press the [CLR] key twice to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. Page 42 GX5500S 11.5.2 Setting up Individual Reply Allows setting up the radio to automatically (default setting) or manually respond to a DSC Individual call requesting you to switch to a working channel for voice communications. When Manual is selected the MMSI of the calling vessel is shown allowing you to see who is calling. This function is similar to caller id on a cellular phone. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. Individual Re3. Press the [ENT] key, then select “Individual ply ply” with the CHANNEL selector knob. 4. Press the [ENT]key. Au5. Turn the CHANNEL selector knob to select “Automatic Manual tomatic” or “Manual Manual.” 6. Press the [ENT] key to store the selected setting. Radio Setup 7. Press the [CLR] key twice to return to the “Radio Setup” menu, then press [ ] the CLR key again to return to radio operation. 11.5.3 Setting up Individual/Group Call Ringer When a Individual Call or Group Call is received the radio will produce a ringing tone for 2 minutes. This selection allows the Individual Call ringer time to be changed. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. Individual 3. Press the [ ENT ] key, then select “Individual Ringer Ringer” with the CHANNEL selector knob. 4. Press the [ENT] key. 5. Turn the CHANNEL selector knob to select ringing time of a Individual Call. 6. Press the [ENT] key to store the selected setting. Radio Setup 7. Press the [CLR] key twice to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. GX5500S Page 43 The GX5500S has the capability to turn off the Individual call ringer. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. DSC Beep 3. Press the [ENT] key, then select “DSC Beep” with the CHANNEL selector knob. 4. Press the [ENT] key. In5. Turn the CHANNEL selector knob to select “Individual dividual” if you wish to disable the Individual Call Group ringer, or “Group Group” if you wish to disable the Group Call ringer and press the [ENT] key. 6. Turn the CHANNEL selector knob to select Off “Off Off.” 7. Press the [ENT] key to store the selected setting. Radio Setup 8. Press the [CLR] key twice to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. To enable the individual ringer tone, repeat the above procedure, turning the On CHANNEL selector knob to select “On On” in step “6” above. 11.5.4 Transmitting an Individual Call This feature allows the user to contact another vessel with a DSC radio. This feature is similar to calling a vessel on CH16 and requesting to go to another channel. Pre-Programmable Calling DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. In2. Turn the CHANNEL selector knob to select “In[ ] dividual dividual.” (To cancel, press the CLR key.) 3. Press the [ENT] key. The transceiver will beep, and the “Individual directory” will appear. 4. Turn the CHANNEL selector knob to select the “Individual” you want to contact. 5. Press the [ENT] key, then turn the CHANNEL selector knob to select the operating channel you want to communicate on and press the [ENT] key. 6. Press the [ENT] key again to transmit the individual DSC signal. Page 44 GX5500S 7. When an individual call acknowledgment is received, the established channel is automatically changed to the channel which is selected on step 5 above and a ringing tone sounds. 8. Press [CLR] key to listen to the channel to make sure it is not busy, then key the microphone and call the other vessel you desire to communicate with. Manual Calling You may enter an MMSI number manually to contact without storing it in the Individual Directory. DSC Op1. Press the [CALL(MENU)] key. The “DSC eration eration” menu will appear. In2. Turn the CHANNEL selector knob to select “Individual dividual.” (To cancel, press the [CLR] key.) 3. Press the [ENT] key. The transceiver will beep, and the “Individual directory” will appear. 4. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key. 5. Enter the MMSI number (nine digits) which you want to contact by the keypad, then press the [ENT] key. 6. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 7. When finished entering the MMSI number, press and hold the [ENT] key. 8. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key. 9. Turn the CHANNEL selector knob to select the operating channel you want to communicate on and press the [ENT] key. 10. Press the [ENT] key again to transmit the individual DSC signal. 11. When an individual call acknowledgment is received, the established channel is automatically changed to the channel which is selected on step 5 above and a ringing tone sounds. 12. Press the [CLR] key to listen to the channel to make sure it is not busy, then key the microphone and call the other vessel you desire to communicate with. GX5500S Page 45 11.5.5 Receiving an Individual Call When receiving an individual call, an acknowledgment must be sent back to the calling station. The GX5500S default setting is Automatic, but has a selection that allows you to manually send a reply before the radio will switch to the requested calling channel. This selection is useful if you want to see who is calling and requesting you to switch to a channel for communications, similar to caller id on a cellular phone. 1. When an individual call is received, an individual call ringing alarm sounds. The radio automatically (automatic mode selected) switches to the requested channel. The LCD shows the MMSI of the vessel calling. 2. Press any key to stop the alarm. 3. Press the PTT on the mic and talk to the calling ship. 11.6 CALL WAITING DIRECTORY The GX5500S logs received distress calls and individual calls. The DSC Call Waiting feature is similar to an answer machine where calls are recorded for review. When a call is logged while the radio is set on the DSC Standby function, a “ ” icon will appear on the LCD. The GX5500S can memorize up to the latest 30 Distress, and up to the latest 80 Individual Calls. 11.6.1 Enabling the Call Waiting Feature Follow the steps below to enable or disable the Call Waiting feature. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup Setup” menu. “DSC Individual Ack Ack” 3. Press the [ENT] key, then select “Individual with the CHANNEL selector knob. 4. Press the [ENT] key. 5. Turn the CHANNEL selector knob to select Able to comply Unable “Able comply” or “Unable Unable.” [ ] 6. Press the ENT key to store the selected setting. Radio Setup 7. Press the [CLR] key twice to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. Page 46 GX5500S 11.6.2 Reviewing Received Calls Logged into the Call Waiting Directory DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. 2. Turn the CHANNEL selector knob to select DSC Log “DSC Log” menu. 3. Press the [ENT] key, then turn the CHANNEL seDistress lector knob to select the category (“Distress DSC Call Log Alert LOG LOG” or “DSC Log”) you want to review and/or call back. 4. Press the [ENT] key, then turn the CHANNEL selector knob to select the station (name or MMSI number) you want to review and/or call back. 5. Press the [ENT] key, to review details for the selected station. 6. Press the [ENT] key again, to call the selected station. NOTE Distress Alert LOG When there is an unread received call, the category (“Distress LOG” DSC Call Log or “DSC Log”) notation will blink. 11.6.3 To Delete the Received Log from the “DSC Log” Directory DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. 2. Turn the CHANNEL selector knob to select DSC Log “DSC Log” menu. 3. Press the [ENT] key, then turn the CHANNEL seLog Delete lector knob to select “Log Delete.” 4. Press the [ENT] key, then turn the CHANNEL Distress selector knob to select the category (“Distress Alert LOG DSC Call LOG LOG” or “DSC LOG”) to be deleted. 5. Press the [ENT] key, then turn the CHANNEL selector knob to select the station (name or MMSI number) to be deleted. 6. Press and hold the [ENT] key until the station (name or MMSI number) is removed from the display. 7. To exit this menu and return to radio operation mode press the [16/9] key. GX5500S Page 47 11.7 GROUP CALL This feature allows the user to contact a group of specific vessels (example members of a yacht club) using DSC radios with Group call function to automatically switch to a desired channel for voice communications. 11.7.1 Setup a Group Call For this function to operate the same Group MMSI must be programmed into all the DSC VHF radios within the group of vessels that will be using this feature. The group MMSI is a 9 digit (first digit permanently set to “0”) that will allow other radios to call your vessel along with others to automatically switch to a working channel for voice communications. This function is very useful for yacht clubs and vessels traveling together that want to collectively make announcements on a predetermined channel. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. Group Direc3. Press the [ENT] key, then select “Group tory tory” with the CHANNEL selector knob. Add 4. Press the [ENT] key, then select “Add Add” with the CHANNEL selector knob. 5. Press the [ENT] key. 6. Press one of the Keypad keys to enter the first letter of the name of the group you want to reference in the directory. Example: Press the [ 2(MEM )] key repeatedly to toggle among the seven available characters associated with that key: 2 Æ A Æ B Æ C Æ a Æ b Æ c Æ 2 .... If a mistake was made entering in the name, pressing the [CLR] key to delete the wrong character. 7. Press the [ENT] key to store the first letter in the name. 8. Repeat step 6 and 7 until the name is complete. The name can consist of up to eleven characters, if you do not use all eleven characters press the [ENT] key to move to the next space. This method can also be used to enter a blank space in the name. If a mistake was made entering in the name repeat pressing the [H/L] key until the wrong character is selected, then enter the correct character. 9. After the eleventh letter or space has been entered, press and hold the [ENT] key to advance to the GROUP MMSI (Maritime Mobile Service IdenPage 48 GX5500S tity Number) number entry. 10. Enter the desired number by the keypad. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 11. To store the data entered, press and hold the [ENT] key. 12. To enter another group address, repeat steps 4 through 13. Radio Setup 13. Press the [CLR] key twice to return to the “Radio Setup” menu, then press the [CLR] key again to return to radio operation. 11.7.2 Transmitting a Group Call Pre-Programmable Calling DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. 2. Turn the CHANNEL selector knob to select Group “Group Group.” (To cancel, press the [CLR] key.) 3. Press the [ENT] key. The transceiver will beep, and the “Group directory” will appear. 4. Turn the CHANNEL selector knob to select the “Group” you want to contact. 5. Press the [ENT] key, then turn the CHANNEL selector knob to select the operating channel you want to communicate on and press the [ENT] key. 6. Press the [ENT] key again to transmit the Group Call signal. 7. When the Group Call signal is sent, the LCD will be as shown in the illustration at the right. 8. After the GROUP CALL is transmitted, all the radios in the group will switch to the designated channel. 9. Listen to the channel to make sure it is not busy, then key the microphone and call the other vessels you desire to communicate with. GX5500S Page 49 Manual Calling You may enter a Group MMSI number manually to contact without the Setting up a Group call number. DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear. 2. Turn the CHANNEL selector knob to select Group “Group Group.” (To cancel, press the [CLR] key.) 3. Press the [ENT] key. The transceiver will beep, and the “Group Directory” will appear. 4. Turn the CHANNEL selector knob to select Manual “Manual Manual,” then press the [ENT] key. 5. Enter the MMSI number (nine digits: first digit permanently set to “0”) which you want to contact by the keypad, then press the [ENT] key. 6. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 7. When finished entering the MMSI number, press and hold the [ENT] key. 8. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key. 9. Turn the CHANNEL selector knob to select the operating channel you want to communicate on and press the [ENT] key. 10. Press the [ENT] key again to transmit the Group Call signal. 11. After the GROUP CALL is transmitted, all the radios in the group will switch to the designated channel. 12. Listen to the channel to make sure it is not busy, then key the microphone and call the other vessels you desire to communicate with. 11.7.3 Receiving a Group Call 1. When a group call is received, the GX5500S will produce a ringing alarm sound and the radio automatically switches to the requested channel. 2. Press any key to stop the alarm. 3. Monitor the channel for the person calling the Group for a message. Page 50 GX5500S 5. If you want to respond, monitor the channel to make sure it is clear, then press the PTT on the mic and talk to the calling ship(s). NOTE After a Group call is received, the time the call was made and the ships MMSI or vessels name will appear on the LCD. 11.8 POSITION REQUEST Advancements in DSC have made it possible to poll the location of another vessel and show the position of that vessel on the display of the GX5500S. Standard Horizon has taken this feature one step further, if any Standard Horizon GPS chart plotters are connected to the GX5500S, the polled position of the vessel is shown on the display of the GPS chart plotter making it easy to navigate to the location of the polled vessel. This is a great feature for anyone wanting to know the position of another vessel. For example your buddy that is catching fish, or finding the location of a person you are cruising with. NOTE The other vessel must have an operating GPS receiver connected to its DSC transceiver and must not have its transceiver set to deny position requests. (Refer the section “11.5 INDIVIDUAL CALL” to enter information into the individual directory). 11.8.1 Setting up Position Reply The GX5500S can be set up to automatically or manually send your position to another vessel. This selection is important if you are concerned about someone polling the position of your vessel that you may not want to. In the manual mode you will see the MMSI or persons name shown on the display allowing you to choose to send your position to the requesting vessel. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. DSC 2. Turn the CHANNEL selector knob to select “DSC Setup Setup” menu. Position Reply 3. Press the [ENT] key, then select “Position Reply” with the CHANNEL selector knob. Auto4. Turn the CHANNEL selector knob to select “Automatic Manual Automatic matic” or “Manual Manual.” In “Automatic Automatic” mode, after a DSC POS Request is received, the radio will automatiManual cally transmit your vessels position. In “Manual Manual” mode, the display of the GX5500S will show who is requesting the position. GX5500S Page 51 6. Press the [ENT] key to store the selected setting. Radio 7. Press the [CLR] key twice to return to the “Radio Setup Setup” menu, then press the [CLR] key again to return to radio operation. 11.8.2 Transmitting a Position Request to Another Vessel Pre-Programmable Request DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear in the display. 2. Turn the CHANNEL selector knob to select the Pos Request Request.” “Pos 3. Press [ENT] key to show the “Position Request Directory.” This directory uses the “Individual Directory” information. 4. Turn the CHANNEL selector knob to select a name, then press the [ENT] key. 5. Press the [ENT] key again to transmit the Position Request DSC call. 6. When the GX5500S receives the position from the polled vessel it is shown on the radio display and also transferred to the GPS Chart plotter. NOTE If the GX5500S does not receive position data from the polled vessel, the LCD will show “NO POSITION DATA.” Manual Request You may enter an MMSI number manually to contact without Setting up the Individual / Position Call Directory. 1. Press the [CALL(MENU)] key. The “DSC DSC Call Menu Menu” menu will appear in the display. 2. Turn the CHANNEL selector knob to select Pos Request “Pos Request.” 3. Press [ENT] key to show the Position request directory. This directory uses the INDIVIDUAL Directory information. Page 52 GX5500S 4. Turn the CHANNEL selector knob to select the Manual “Manual Manual,” then press the [ENT] key. 5. Enter the MMSI number (nine digits) which you want to contact by the keypad, then press the [ENT] key. 6. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 7. When finished entering the MMSI number, press and hold the [ENT] key. 8. Press the [ENT] key to transmit the position request DSC call. 9. When the GX5500S receives the position from the polled vessel it is shown on the radio display and also transferred to the GPS Chart plotter. 11.8.3 Receiving a Position Request When a position request call is received from another vessel, a ringing alarm will sound and POS REQUEST will be shown in the LCD. Operation and transPosition Reply DSC Setup ceiver function differs depending on “Position Reply” in the “DSC Setup” menu setting. Automatically reply: 1. When a position request call is received, a calling alarm sounds 4 times. Then requested position coordinates are transmitted automatically to the vessel requesting your vessels position. 2. To exit from position request display, press the [CLR] key. Manually reply: 1. When a position request call is received from another vessel, the LCD will show the time and MMSI or name of person requesting your vessel’s position. 2. A ringing alarm sounds 4 times. To send your vessels position to the requesting vessel, press the [ENT] key. Or to exit from position request display, press the [CLR] key. GX5500S Page 53 11.9 POSITION SEND The feature is similar to Position Request, however instead of requesting a position of another vessel this function allows you to send your position to another vessel. Your vessel must have an operating GPS receiver connected for the GX5500S to send the position. NOTE To transmit a Position Send Call, you must setup the GX5500S DSC Individual / Position Call Directory with the name of the vessel(s) or person and the MMSI of the DSC radio you wish to send your position to. To setup this directory refer to section “11.5.1 Setting up the Individual / Position Call Directory.” 11.9.1 Setting up a Position Send Ringer The GX5500S has the capability to turn off the Position Send ringer. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. DSC Beep 3. Press the [ENT] key, then select “DSC Beep” with the CHANNEL selector knob. Position Re4. Press the [ENT] key, then select “Position port port” with the CHANNEL selector knob. Off 5. Press the [ENT] key, then select “Off Off” with the CHANNEL selector knob. 6. Press the [ENT] key to store the selected setting. Radio 7. Press the [CLR] key twice to return to the “Radio Setup Setup” menu, then press the [CLR] key again to return to radio operation. To return to enabling the ringer tone, repeat the above procedure, turning the On CHANNEL selector knob to select “On On” in step “6” above. 11.9.2 Transmitting a DSC Position Send Call Pre-Programmable Calling DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear in the display. 2. Turn the CHANNEL selector knob to select the Pos Report “Pos Report.” 3. Press [ENT] key to show the “Position Send DirecPage 54 GX5500S tory.” This directory uses the “Individual Directory” information. 4. Turn the CHANNEL selector knob to select a name in the directory, then press the [ENT] key. 5. Press the [ENT] key again to send your position to the selected vessel. Ra6. Press the [CLR] key twice to return to the “Radio Setup Setup” menu, then press the [ CLR ] key again to return to radio operation. Manual Calling You may enter an MMSI number manually to contact without the Setting up the Individual / Position Call Directory. DSC Call 1. Press the [CALL(MENU)] key. The “DSC Menu Menu” will appear in the display. 2. Turn the CHANNEL selector knob to select the Pos Report “Pos Report.” 3. Press [ENT] key to show the “Position Send Directory.” This directory uses the “Individual Directory” information. 4. Turn the CHANNEL selector knob to select Manual “Manual Manual,” then press the [ENT] key. 5. Enter the MMSI number (nine digits: first digit permanently set to “0”) which you want to contact by the keypad, then press the [ENT] key. 6. If a mistake was made entering in the MMSI number repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 7. When finished entering the MMSI number, press and hold the [ENT] key. 8. Press the [ENT] key to send your position to the selected vessel. GX5500S Page 55 11.9.3 Receiving a DSC Position Send Call When another vessel transmits their vessels location to the GX5500S the following will happen: 1. A ringing sound will be produced when the call is received. 2. Press any key to stop ringing. 3. The position from the vessel sending it's position will be shown on the display of the radio and also transferred to any Standard Horizon GPS Chart plotter if connected. 11.10 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) You may send the Latitude/Longitude of your vessel manually when the GX5500S is not connected the GPS receiver. After the position is entered, transmitting a DSC Distress, Position Request, or Position Send will contain the manually entered position. 1. Press and hold down the [CALL(MENU)] key Radio Setup Setup” menu appears. until “Radio 2. Turn the CHANNEL selector knob to select DSC Setup “DSC Setup” menu. Position In3. Press the [ENT] key, then select “Position put put” with the CHANNEL selector knob. 4. Press the [ENT] key. The transceiver will beep, and the display will be as shown in the illustration on the right. 5. Enter the your local time from the keypad by the 24hour system on the UTC time, then press the [ENT] key. 6. Enter the Latitude/Longitude of your vessel location by the keypad, then press the [ENT] key. To select North (N) press [6(NAV)] key, South (S) press the [7(SCRM)] key, East (E) press the [3(SCAN)] key or West (W) press the [9(FOG)] key. 7. To store the data entered, press and hold the [ENT] key. Radio Setup Setup” menu, then press 8. Press the [CLR] key twice to return to the “Radio the [CLR] key again to return to radio operation. Page 56 GX5500S MEMO GX5500S Page 57 12 RADIO SETUP NOTE The optional CMP25 RAM+ mic and VH-310 Handset can also change the SETUP menu. Refer to page 75 (CMP25) and page 85 (VH-310) for details. 12.1 LCD CONTRAST Due to varying mounting (overhead or below) this selection sets up the display for best viewability. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Contrast 2. Press the [ENT] key, then select “Contrast Contrast” in the Radio Setup “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the de0” to sired level. The contrast level can be set from “0 31 “31 31.” 5. Press the the [ENT] key to store the selected level. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 58 GX5500S 12.2 TIME OFFSET Sets the time offset between local time and UTC shown on the display. Time is displayed when the GPS unit (not supplied) is connected. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Time Offset Offset” in the 2. Press the [ENT] key, then select “Time Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select time offset from UTC. See illustration below to find your off0:00 set time from UTC. If “0:00 0:00” is assigned, the time is the same as UTC (Universal Time Coordinated or GMT Greenwich Mean Time). 5. Press the [EN] key to store the time offset. 6. To exit this menu and return to radio operation mode press the [16/9] key. OFFSET TIME TABLE GX5500S Page 59 12.3 TIME DISPLAY Allows the time shown on the display to be shown in local or UTC time. Time is displayed when the optional GPS unit is connected. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Time Display Display” in 2. Press the [ENT] key, then select “Time Radio Setup Setup” menu with the CHANNEL selector the “Radio knob. 3. Press the [ENT] key. UTC 4. Turn the CHANNEL selector knob to select “UTC UTC” or Local “Local Local.” 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. In the local time mode, the display shows the time by the 12-hour system, while the display shows the time by the 24-hour system in the UTC mode. (“UTC” mode) (“LOCAL” mode) 12.4 SOG (SPEED OVER GROUND) UNIT Allows the SOG shown on the NAV display to be shown in Knot, MPH or KPH. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. SOG Unit 2. Press the [ENT] key, then select “SOG Unit” in the “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select desired unit. 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 60 GX5500S 12.5 TRUE MAGNETIC CHANGE (NAV DISPLAY) This selection allows customizing the GPS COG (Course Over Ground) displayed on the LCD to be in True or Magnetic. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Magnetic Magnetic” in the 2. Press the [ENT] key, then select “Magnetic Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. Mag4. Turn the CHANNEL selector knob to select “Magnetic True netic” or “True True.” 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. 12.6 PRIORITY CHANNEL SET Allows selection of the priority channel when priority scan is enabled. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Priority CH 2. Press the [ENT] key, then select “Priority CH” in the Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the channel to be a priority. 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. GX5500S Page 61 12.7 SCAN TYPE This selection is used to select the scan mode between “Memory Scan” and “Priority Scan.” 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. SCAN Type Type” in the 2. Press the [ENT] key, then select “SCAN Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. Priority 4. Turn the CHANNEL selector knob to select “Priority SCAN Memory SCAN SCAN” or “Memory SCAN.” 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. 12.8 SCAN RESUME TIME This selection is used to select the time the GX5500S waits after a transmission ends before starting scanning. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. SCAN Resume Resume” in 2. Press the [ENT] key, then select “SCAN Radio Setup the “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the desired resume time. The resume time can be set to 1sec 5sec Off Off “1sec 1sec” through “5sec 5sec,” or “Off Off.” In the “Off Off” selection, the scanner will resume after the other station stops transmitting (carrier drops). 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 62 GX5500S 12.9 KEY BEEP This selection is used to select the beep tone volume level when a key is pressed. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Key Beep Beep” in the 2. Press the [ENT] key, then select “Key Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to to select the desired level. The contrast level can be set from Level 1 Level 6 High Off “Level 1” to “Level 6,” “High High,” or “Off Off,” [ ] 5. Press the ENT key to set the key beep condition. 6. To exit this menu and return to radio operation mode press the [16/9] key. NOTE Emergency alarm and beeps for DSC operation cannot be turned OFF. 12.10 WEATHER ALERT SETUP This selection allows the NOAA Weather alert to be turned off. Default setting is “On SCAN and WX CH.” 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Weather Alert 2. Press the [ENT] key, then select “Weather Alert” in Radio Setup the “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the desired WX alert mode. The WX alert mode can be On WX CH On SCAN On SCAN and WX set to “On CH,” “On SCAN,” “On CH Off CH,” or “Off Off.” 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. GX5500S Page 63 12.11 CHANNEL NAMING This selection allows you to customize the name of a channel from the default name. Example: CH69 PLEASURE to HOOKUP 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. CH Name 2. Press the [ENT] key, then select “CH Name” in the Radio Setup “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the channel to be named and press the [ENT] key. 5. Press the one of the Keypad keys to enter the first letter of channel name. Example: Press the [4(GHI)] key repeatedly to toggle among the seven available characters associated with that key: 4 Æ G Æ H Æ I Æ g Æ h Æ i Æ 2 .... 6. Press the [ENT] key to enter the desired letter and move the cursor one space to the right. 7. Repeat step 5 and 6 until the name is complete. The name can consist of up to 16 characters. If you do not use all 16 characters, press the [ENT] key to move to the next space. This method can also be used to enter a blank space in the name. To clear the previous letter, press the [CLR] key. 8. Press and hold down the [ ENT] key to enter the name. 9. If you want to enter the name of another channel, repeat steps 3 through 8. 10. To exit this menu and return to radio operation mode press the [16/9] key. Page 64 GX5500S 12.12 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET This function allows you to change the name of the RADIO or second station microphone. Example: “RADIO - Cabin,” “RAM1 - Flybridge.” 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. Unit Name Name” in the 2. Press the [ENT] key, then select “Unit Radio Setup Setup” menu with the CHANNEL selector “Radio knob. 3. Press the [ENT] key. 4. With the second station mic or handset connected, turn the CHANNEL selector knob to select the Unit Radio RAM1 (“Radio Radio” or “RAM1 RAM1”) to be named, then press the [ENT] key, otherwise press the [ENT] key. 5. Press the one of the Keypad keys to enter the first letter of channel name. Example: Press the [2 (MEM)] key repeatedly to toggle among the seven available characters associated with that key: 2 Æ A Æ B Æ C Æ a Æ b Æ c Æ 2 .... 6. Press the [ENT] key to enter the first letter in the name and step to the next letter to the right. 7. Repeat step 5 and 6 until the name is complete. The name can consist of up to 8 characters, if you do not use all 8 characters press the [ENT] key to move to the next space. This method can also be used to enter a blank space in the name. To clear the previous letter, press the [CLR] key. Unit 8. Press and hold the [ENT] key to enter the name and return to the “Unit Name Name” menu. 9. If you want to enter the name of another unit, repeat steps 4 through 8. 10. To exit this menu and return to radio operation mode press the [16/9] key. GX5500S Page 65 12.13 TREBLE AND BASS AUDIO TONE CONTROL Allows the treble and bass of the speaker audio to be adjusted for best listening in noisy environments. The effect is similar to adjusting the treble and bass controls on a stereo. 1. Press and hold down the [CALL(MENU)] key Radio Setup until “Radio Setup” menu appears. Tone Control 2. Press the [ENT] key, then select “Tone Control” Radio Setup in the “Radio Setup” menu with the CHANNEL selector knob. Bass 3. Press the [ENT] key, then select “Bass Bass” with the CHANNEL selector knob. 4. Press the [ENT] key, then turn the CHANNEL selector knob to select desired audio response in the lower frequency range. Available selec–6” through “+6 +6 +6.” tions are “– 5. Press the [ENT] key to store the selected setting. Treble 6. Select “Treble Treble” with the CHANNEL selector knob, then press the [ENT] key. 7. Turn the CHANNEL selector knob to select desired audio response in the higher frequency range. –6” through “+6 +6 Available selections are “– +6.” 8. Press the [ENT] key to store the selected setting. 9. To exit this menu and return to radio operation mode press the [16/9] key. 12.14 FOG ALERT TONE FREQUENCY This selection allows you to select the Tone Frequency for the PA/FOG Operation. Available selections are “200Hz” through “850Hz” in 50Hz steps. The default Tone Frequency is 400Hz. 1. Press and hold down the [CALL(MENU)] key until Radio Setup “Radio Setup” menu appears. FOG Frequency Frequency” in 2. Press the [ENT] key, then select “FOG Radio Setup the “Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select desired tone frequency. 5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [16/9] key. Page 66 GX5500S 12.15 CALENDAR SETUP Calendar Menu The GX5500S has a built in clock to remember date, time, latitude and longitude. Connecting a GPS to the GX5500S is very important as it not only will be used to update the calendar automatically and also when a DSC Distress call is transmitted will send your vessels location to other vessels to aid in the rescue. Refer to section “8.3 ACCESSORY CONNECTIONS.” GPS Connected When a GPS is connected, the GX5500S will automatically store the calendar date and time information after being connected for 1 hour. GPS Not Connected If a GPS is not connected to the GX5500S, the date and time has to be manually entered into the Calendar Menu in order for the clock to operate. The time you will enter will be your local time in UTC format. To calculate your local UTC time: a. Find you location on the Standard Time chart below. NOTE The chart below is show in Standard Time. For Daylight Savings subtract one hour from your offset. GX5500S Page 67 Examples: NOTE If you are west of UTC time you will add the offset to your time. If you are East of UTC time you will subtract the offset from your time. City Offset Time (convert local time to 24 hour) Calculate 24hour local + Offset (East of UTC) Los Angels -8 4:00PM (local) or 16:00 (24hour) 16:00 + 08:00 = 22:00 City Offset Time (convert local time to 24 hour) Calculate 24hour local + Offset (East of UTC) NY -5 4:00PM (local) or 16:00 (24hour) 16:00 + 05:00 = 21:00 City Offset Time (convert local time to 24 hour) Calculate 24hour local + Offset (East of UTC) Rome +1 4:00PM (local) or 16:00 (24hour) 16:00 - 01:00 = 15:00 Radio 1. Press and hold the [CALL(MENU)] key until “Radio Setup Setup” menu is shown. 2. Press the [ENT] key Calendar 3. Select “Calendar Calendar” with the CHANNEL selector knob. 4. Press the [ENT] key Date (20YY 20YY MM DD 20YY/MM MM/DD DD)” with the CHANNEL se5. Select “Date lector knob. 6. Press the [ENT] key. 7. Enter the current date (Yr/Mo/day) from the keypad. 8. If a mistake was made entering repeat pressing the [H/L] key until the wrong number is selected, then enter the correct number. 9. Using the Standard time table above, calculate the UTC time of your position. Note: For daylight savings time subtract one hour to the offset in your time zone. 9. To enter the time, press the [ENT] key until the first Time (hh hh digit in the “Time hh/mm [UTC])” is selected on the mm [UTC] display, then enter the time from the keypad. 10. Press and hold down the [ENT] key to store the selected setting. Update 11. Select “Update Update” with the CHANNEL selector knob, then press the [ENT] key. Page 68 GX5500S 12. Turn the CHANNEL selector knob to select the Automatic method of the time adjustment between “Automatic Automatic” Manual and “Manual Manual.” 13. Press the [ENT] key to store the selected setting. 14. To exit this menu and return to radio operation mode press the [16/9] key. GX5500S Page 69 13 ENHANCED RAM+ MIC OPERATION When the RAM+ microphone is connected to the GX5500S, most VHF, DSC, setup menus and PA modes can be remotely operated. The RAM+ Mic supplied with 23 feet (7 m) of routing cable and can be extended up to 70 feet (21 m) using three 23 feet extension cables model CT-100. The intercom operation can be used between the RAM+ Mic and the transceiver. In addition, speaker wires are supplied at the panel mount of the routing cable allowing the STANDARD HORIZON MLS-300 or MLS-310 External speakers to be connected in noisey environments. 13.1 RAM+ MIC CONTROLS SET MENU NAV WX DW 16 9 IC U.I.C CLR SQUELCH CONTROL (SQL) Press this key to activate the squelch adjusting mode. Press the microphone’s [S] or [T] key to adjust the squelch. VOLUME KEY (VOL) Press this key to activate the volume adjusting mode. Press the microphone’s [S] or [T] to adjust the volume. Page 70 GX5500S POWER SWITCH (PWR) Press and hold down this key to turn to the transceiver and RAM+ Mic on or off. PTT (Push-To-Talk) SWITCH Activates transmission. [H/L] KEY Toggles between high and low power. When the [H/L] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The [H/L] key does not function on transmit inhibited and low power only channels. [S](UP)/[T](DOWN) KEY These keys are used to select channels, adjust the volume and squelch level, and to choose the item selection of different functions (such as the DSC operation). In many ways, these keys emulate the function of the transceiver’s CHANNEL selector knob. [16/9] KEY Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the [16/9] key reverts to the previous selected working channel. Secondary use Please see secondary use for the [WX] and [MEM] key. KEY PAD [SCAN(CLR)] Key 1. Starts and stops scanning of programmed channels. 2. If held while the [UP(S)] or [DOWN(T)] key on the microphone are pressed, the radio will show the channels programmed in scan memory. This function will not work if the unit is scanning. NOTE: The priority channel is channel 16 only. [CALL(SET)MENU] Key The [CALL(SET)MENU] key functions as the enter key. Secondary use Press the [CALL(SET)MENU] key to access the DSC OPERATION menu. Press and hold the [CALL(SET)MENU] key to access the SETUP menu. GX5500S Page 71 [DW(IC)] Key Watches for a transmission on CH16 and another selected channel until either signal is received. (Dual watch) Secondary use Press and hold [DW(IC)] key, intercom operation will operate between radio and RAM Mic. [NAV] Key Press this key, when connected to the GPS receiver to show GPS position data (Lat/Lon) and Time on the display of the RAM+. Secondary use Press and hold [NAV] key to access PA/FOG function menu. NOTE When in PA or FOG mode the GX5500S will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls. [WX] Key Immediately recalls the previously selected NOAA weather channel from any channel location. Secondary use Holding down the [16/9] key while pressing the [WX] key changes the mode from USA to International or Canadian. [DISTRESS] KEY Used to send a DSC Distress Call. To send the distress call: 1. Lift the red rubber cover. 2. Press and hold the Red button. The RAM+ display will count down (5-4-3-2-1) and then transmit the Distress call. 3. When the distress signal is sent, CH70 and “TX” icon will appear on the LCD. After the message has been sent, the radio will sound a Distress Alarm. 4. The transceiver “shadow-watches” for a transmission on CH16 or CH70 until an acknowledgment signal is received. “DISTRESS” and “WAITING” will appear on the LCD. 5. When a DSC Distress acknowledgment is received, a distress alarm sounds and channel 16 is automatically selected. The LCD shows the MMSI of the ship responding to your distress. Page 72 GX5500S RECEIVED ACK: acknowledgment signal is received. RECEIVED RLY: relay signal is received from another vessel or coast station. 6. To cancel the DSC distress alarm signal from the speaker, press any key. 13.2 INTERCOM OPERATION 13.2.1 Communication 1. Press and hold the [DW(IC)] key while in the “RADIO” mode, the mode is changed to “INTERCOM” mode. 2. If your GX5500S is equipped with two RAM+ Mics (or VH310 Handsets), select the station you wish to communiRADIO cate (RADIO RADIO, RAM RAM, or ALL ALL) with the [T]/[S] key, then press the [ENT] key. 3. When the “INTERCOM” operation is activated, “IC” is displayed on the RAM+ Mic and “INTERCOM” is displayed on the GX5500S. (RAM+ Mic’s PTT switch is pressed) 4. Press the PTT switch, “TALK” is displayed. NOTE: A warning beep is emitted when the RAM+ Mic PTT switch is pressed while the transceiver (GX5500S’s PTT switch is pressed) microphone’s PTT switch is pressed. 5. Speak slowly and clearly into the microphone, hold the microphone about 1/2 inch away from your mouth. 6. When finished, release the PTT switch. 7. Press the [DW(IC)] key again the mode will revert to “RADIO” mode. 13.2.2 Calling Press and hold the [DW(IC)] key for one second when the “INTERCOM” is activated, a calling beep is emitted from the GX5500S speaker. GX5500S Page 73 13.3 PA/FOG OPERATION When the RAM+ is connected to the GX5500S it is capable of controlling the 30W Public address, 4 fog horns, bells, and whistles. NOTE When in PA or FOG mode the GX5500S will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls. 13.3.1 Operating the PA / Hailer 1. Press and hold the [NAV] key then select PA with the [S] or [T] key. 2. Press the [CALL(SET)MENU] key. 3. Press the PTT switch and speak into the microphone. 4. To turn up the PA Volume, press the PTT switch and press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W. 5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume. To exit from the PA Hailer mode, press the [CALL(SET)MENU], [16/9], or [WX] key. 13.3.2 Operating the FOG Horn The GX5500S is capable of sending 4 pre-programmed fog signals and also Horn, Siren, Aground and Anchor signals. UNDERWAY: POWER BOAT UNDERWAY STOPPED: POWER BOAT STOPPED SAIL: SAIL BOAT, FISH VESSEL, TOW VESSEL TOW: VESSEL UNDER TOW 1. Press and hold the [NAV] key then select FOG with the [S] or [T] key. 2. Press the [CALL(SET)MENU] key. 3. Select the one of the eight functions described above with the [S] or [T] key and press the [CALL(SET)MENU] key. Horn Siren 4. On the “Horn Horn” and “Siren Siren” modes, press the PTT switch to activate the tone through the HAIL/PA speaker. Press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W. 5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Page 74 GX5500S Key, then press the [S ] or [T ] key to the desired listen back volume. To exit from the FOG or other signaling mode, press the [16/9], [WX], or [CALL/SET] key. 13.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) You may send the Latitude/Longitude of your vessel manually from the RAM+ Mic when the GX5500S is not connected the GPS receiver. After the position is entered, transmitting a DSC Distress, Position Request, or Position Send will contain the manually entered position. RA1. Press and hold down the [CALL(SET)MENU] key until “RADIO SETUP SETUP” menu appears. DSC SETUP 2. Press the [T] key to select “DSC SETUP” menu. [ ( ) ] POS INPUT 3. Press the CALL SET MENU key, then select “POS INPUT” with the [S]/[T] key. 4. Press the [CALL(SET)MENU] key. The display will be as shown in the illustration on the right. 5. Enter the your local time by the 24-hour system on the UTC time. Use the [CALL(SET)MENU] and [H/L] key to navigate to each column of the time, then use the [S]/[T] key to select the desired numbers in each column. Repeat for each column, to complete the time. 6. Enter the Latitude/Longitude of your vessel location with the same procedure as description above. 7. To store the data entered, press the [16/9] key to exit this menu and return to radio operation mode. GX5500S Page 75 13.5 DSC/RADIO SETUP MODE The RAM+ can access the DSC / RADIO setup menu (refer to section “11 DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for details). However, the LAMP, CONTRAST, and KEY BEEP menu item which is accessed from the RAM+ only controls the RAM+’s display and speaker. DSC/RADIO Setup mode from the RAM+: RADIO SETUP 1. Press and hold down the [CALL(SET)MENU] key until “RADIO SETUP” menu appears. RADIO SETUP DSC SETUP 2. Press the [S]/[T] key to select “RADIO SETUP” or “DSC SETUP” menu. 3. Press the [CALL(SET)MENU] key, then select the menu item you wish to work on by pressing the [S]/[T] key. 4. Press the [CALL(SET)MENU] key. 5. Press the [S]/[T] key to change the value or condition for the menu item, then press the [CALL(SET)MENU] key to save the new setting. EXIT 6. Press the [S]/[T] key to select “EXIT EXIT,” then press the [CALL(SET)MENU] key to return to the normal operation. RADIO SETUP DIMMER CONTRAST NAV DISPLAY SOG UNIT MAGNETIC KEY BEEP UNIT NAME EXT SPK EXIT Function Adjusts the backlight Contrast adjustment of the display Selects Lat/Lon or SOG to be displayed Knots, MPH or KPH selection True or Magnetic selection On or off selection Allow changing the name of the connected mic Internal or External speaker selection Exits the RADIO SETUP menu DSC SETUP INDIVIDUAL DIR INDIVIDUAL REPLY INDIVIDUAL ACK INDIVIDUAL RINGER GROUP DIR POSITION REQUEST DSC BEEP EXIT Page 76 Function Setup the Individual Directory Auto or manual selection Able or Unable to acknowledge Individual Call Selects from 1 to 4 rings Setup the Group Directory Auto or manual selection Turns on or off the Individual, Group, Position request or send beep Exits the DSC Setup menu GX5500S 13.5.1 Lat/Lon or Time and SOG Display Factory default is “Your Vessel’s Current Position,” however, following the steps below the GPS Information can be changed to “Course Over Ground (COG).” RA1. Press and hold down the [CALL(SET)MENU] key until “RADIO SETUP SETUP” menu appears. NAV DIS2. Press the [CALL(SET)MENU] key, then select “NAV PLAY PLAY” with the [S]/[T] key. 3. Press the [CALL(SET)MENU] key. Pos (Your Vessel’s Cur4. Press the [T] or [S] key to select “Pos Cru (Course Over Ground).” rent Position)” or “Cru 5. Press the [CALL(SET)MENU] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode. GX5500S Page 77 14 VH-310 HANDSET OPERATION When the VH-310 HANDSET is connected to the GX5500S, most VHF, DSC, and setup menus can be remotely operated. The VH-310 HANDSET is supplied with 7 m of routing cable and can be extended up to 21 m using three 7 m extension cables model CT-100. The intercom operation can be used between the VH-310 HANDSET or the GX5500S. In addition, speaker wires are supplied at the panel mount of the routing cable allowing the STANDARD HORIZON MLS300 or MLS-310 External speakers to be connected in noisey environments 14.1 VH-310 HANDSET CONTROLS PWR key Press and hold down this key to turn to the transceiver and VH-310 HANDSET on and off. PTT (Push-To-Talk) Switch Activates transmission. [H/L] key Toggles between high and low power. When the [H/L] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from “LO” to “HI” power until the PTT is released. The [H/L] key does not function on transmit inhibited and low power only channels. [DISTRESS] key Used to send a DSC Distress Call. To send the distress call refer to section “11.3.1. Transmitting a DSC Distress Alert.” RADIO CONTROL KEYS [VOL] key Activates the volume adjusting mode. Press this key to activate the volume adjusting mode. Press the [S] or [T] to adjust the volume. NOTE When the VH-310 handset is removed from the cradle the speaker audio will be automatically reduced so not to damage your hearing. When the VH-310 is in the cradle the speaker audio will increase so communications can be heard. Page 78 GX5500S [SQL] key Activates the squelch adjusting mode. Press this key to activate the squelch mode. Press the [S] or [T] key to adjust the squelch. [CALL(MENU)] key The [CALL(MENU)] key functions as the enter key. Secondary use Press the [CALL(MENU)] key to access the DSC OPERATION menu. The “INDIVIDUAL CALL,” “GROUP CALL,” “ALL SHIP CALL,” “POSITION REQUEST,” POSITION SEND,” STANDBY MODE,” and “CALL WAITING” functions can be accessed from the DSC OPERATION menu. Press and hold the [CALL(MENU)] key to access the RADIO SETUP (refer to section 12) or DSC SETUP menu (refer to section 11). [F] key Activates the “Alternate” key function. Press this key to activate the “Alternate” key function of the numeric keypad. [16/9] key Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the [16/9] key reverts to the previous selected working channel. Secondary use Press and hold the [16/9] key then press the [WX] key to switch between the USA, International or Canadian channels. [WX] key Immediately recalls the previously selected US NOAA weather channel from any channel location. Secondary use Holding down the [16/9] key while pressing the [WX] key switches the Channel Group. [S] / [T] KEY These keys are used to select channels, adjust the volume and squelch level, and to choose the item selection of different functions (such as DSC operation). GX5500S Page 79 KEYPAD [1(DIM)] key When in radio mode, this key is used to directly select digit “1” in a channel number. Secondary use Press the [F] key first then press the [1(DIM)] key to access the LCD Dimmer menu. Refer to section “10.16 LCD DIMMER” for details. [2(MEM)] Key When in radio mode, this key is used to directly select digit “2” in a channel number. Secondary use Press the [F] key first then press the [2(MEM)] key, memorize the selected channel into the transceiver scan memory for scanning. When repeat the same procedures ([F] Æ [2(MEM)]), will delete the channel from the scan memory. Refer to section “10.13 SCANNING” for details. [3(SCAN)] Key When in radio mode, this key is used to directly select digit “3” in a channel number. Secondary use 1) Press the [F] key first then press the [3(SCAN)] key to start and stop the scanning of programmed channels. Refer to section “10.13 SCANNING” for details. 2) While holding down the [3(SCAN)] key and pressing the [S] or [T] key, you can confirm memory channels for scanning. [4(DW)] Key When in radio mode, this key is used to directly select digit “4” in a channel number. Secondary use Press the [F] key first then press the [4(DW)] key to scan for voice communications on the priority channel and another selected channel until a signal is received on either channel (Dual Watch). Refer to section “10.12 DUAL WATCH (TO CH-16)” for details. [5(IC)] Key When in radio mode, this key is used to directly select digit “5” in a channel number. Secondary use Press the [F] key then press the [5(IC)] key to activate intercom function between RAM+(s) or VH-310 handset(s). Refer to section “10.16 INTERCOM OPERATION” for details. Page 80 GX5500S [6(NAV)] Key When in radio mode, this key is used to directly select digit “6” in a channel number. Secondary use Press the [F] key first then press the [6(NAV)] key, the LCD will display NAV GPS Data, Time, SOG (Speed Over Ground), and COG (Course Over Ground) when a GPS is connected to the accessory cable of the GX5500S. See section “8.3 ACCESSORY CABLE” for details. [7(SCRM)] Key When in radio mode, this key is used to directly select digit “7” in a channel number. Secondary use Press the [F] key then press the [7(SCRM)] key to toggle the Voice Scrambler “on” and “off.” Press the [F] key then press and hold the [7(SCRM)] key to enable the selection the Voice Scrambler code. Refer to section “10.18 VOICE SCRAMBLER” for details. [8(PA)] Key When in radio mode, this key is used to directly select digit “8” in a channel number. Secondary use Press the [F] key then press the [8(PA)] key to operate the 30 Watt PA function. Refer to section “10.14 PA/FOG OPERATION” for details. NOTE When in PA or FOG mode the GX5500S will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls. [9(FOG)] Key When in radio mode, this key is used to directly select digit “9” in a channel number. Secondary use Press the [F] key then press the [9(FOG)] key to operate the Fog Horn function. Refer to section “10.14 PA/FOG OPERATION” for details. [0(A)] Key When in radio mode, this key is used to directly select digit “0” in a channel number. Secondary use Used to select A (alpha channels). Press the desired channel keys then press and hold [0] key until “A” appears next to the channel number and press [ENT] to select the channel. GX5500S Page 81 [CLR] Key Press the [CLR] key to cancel the menu selection and/or keypad entry. [ENT] Key Press the [ENT] key to enter the menu selection and/or keypad entry. 14.2 INTERCOM OPERATION 14.2.1 Communication 1. Press the [F] key followed by the [5(IC)] key, the mode is changed to “INTERCOM” mode. 2. If your GX5500S is equipped with two VH-310 Handsets (or RAM+ Mics), select the station you wish to communiRADIO RADIO, RAM RAM, or ALL ALL) with the [T]/[S] key, then press cate (RADIO the [ENT] key. 3. When the “INTERCOM” operation is activated, “IC” is displayed on the VH310 Handset (and RAM+ Mic, if used) and “INTERCOM” is displayed on the (VH-310 Mic’s PTT switch is pressed) GX5500S. 4. Press the PTT switch, “TALK” is displayed. NOTE: A warning beep is emitted when the RAM+ Mic PTT switch is (GX5500S’s PTT switch is pressed) also being pressed while the transceiver microphone’s PTT switch is pressed. 5. Speak slowly and clearly into the microphone, hold the microphone about 1.5 cm away from your mouth. 6. When finished, release the PTT switch. 7. To exit the “INTERCOM” mode and return to radio operation mode, press the [F] key followed by the [5(IC)] key again. 14.2.2 Calling Press and hold the [5(IC)] key for 1 second when the “INTERCOM” is activated, a calling beep is emitted from the GX5500S speaker. Page 82 GX5500S 14.3 PA/FOG OPERATION The VH-310 Handset is capable of controlling the 30W Public address, 4 fog horns, bells and whistles. NOTE When in PA or FOG mode the GX5500S will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls. 14.3.1 Operating the PA / Hailer 1. Press the [F] key followed by the [8(PA)] key, activate the “PA / HAIL” mode. 2. Press the PTT switch and speak into the microphone. 3. To turn up the PA Volume, press the PTT switch and press the [S] or [T ] keys to adjust the Audio output level. The level can be set from 0 to 30W. 4. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume. To exit from the PA / Hailer mode, press the [F] key followed by the [8(PA)] key again. 14.3.2 Operating the FOG Horn The GX5500S is capable of sending Underway, Stop, Sail, Tow, Horn, Siren, Aground and Anchor signals. 1. Press the [F] key followed by the [9(FOG)] key, to activate the “FOG HORN” menu. 2. Select the one of the eight functions described above with the [S] or [T] key and press the [ENT] key. Horn Siren 3. On the “Horn Horn” and “Siren Siren” modes, press the PTT switch to activate the tone through the HAIL/PA speaker. Press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W. 4. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume. To exit from the FOG HORN mode, press the [F] key followed by the [9(FOG)] key again. GX5500S Page 83 14.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) You may send the Latitude/Longitude of your vessel manually from the VH310 Handset when the GX5500S is not connected the GPS receiver. After the position is entered, transmitting a DSC Distress, Position Request, or Position Send will contain the manually entered position. Radio 1. Press and hold down the [CALL(MENU)] key until “Radio Setup Setup” menu appears. DSC SETUP 2. Press the [T] key to select “DSC SETUP” menu. POS INPUT 3. Press the [ENT] key, then select “POS INPUT” with the [S]/ [T] key. 4. Press the [ENT] key then, enter the your local time from the keypad by the 24-hour system on the UTC time. 5. Enter the Latitude of your vessel location (xx.xx.xx) by the keypad, then press the [6(NAV)] key to select North (N), or [7(SCRM)] key to select South (S). 6. Enter the Longitude of your vessel location (xxx.xx.xx) by the keypad, then press the [3(SCAN)] to select East (E), or [9(FOG)] key to select West (W). 7. If a number was entered by mistake, press the H/L key repeatedly to select the number. Press the [S]/[T] key to select the desired number. 8. Press and hold in the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode. Page 84 GX5500S 14.5 DSC/RADIO SETUP MODE The VH-310 Handset can access the DSC / RADIO setup menu (refer to section “11 DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for details). The CONTRAST CONTRAST, NAV DISPLAY DISPLAY, KEY BEEP BEEP, and AF SELECT menu item accessed from the VH-310 Handset only controls the VH-310 Handset’s display and speaker. DSC/RADIO Setup mode from the VH-310 Handset: RADIO SETUP 1. Press and hold down the [CALL(MENU)] key until “RADIO SETUP” menu appears. RADIO SETUP DSC SETUP 2. Press the [S]/[T] key to select “RADIO SETUP” or “DSC SETUP” menu. 3. Press the [ENT] key, then select the menu item you wish to work on by pressing the [S]/[T] key. 4. Press the [ENT] key. 5. Press the [S]/[T] key to change the value or condition for the menu item, then press the [ENT] key to save the new setting. EXIT 6. Press the [S]/[T] key to select “EXIT EXIT,” then press the [ENT] key to return to the normal operation. RADIO SETUP CONTRAST NAV DISPLAY SOG UNIT MAGNETIC KEY BEEP UNIT NAME EXT SPK AF SELECT EXIT Function Contrast adjustment of the display Selects Lat/Lon or SOG to be displayed Knots, MPH or KPH selection True or Magnetic selection On or off selection Allow changing the name of the connected mic Internal or External speaker selection Shown when VH-310 connected Exits the RADIO SETUP menu DSC SETUP INDIVIDUAL DIR INDIVIDUAL REPLY INDIVIDUAL ACK INDIVIDUAL RINGER GROUP DIR POSITION REQUEST DSC BEEP EXIT Function Setup the Individual Directory Auto or manual selection Able or Unable to acknowledge Individual Call Selects from 1 to 4 rings Setup the Group Directory Auto or manual selection Turns on or off the Individual, Group, Position request or send beep Exits the DSC Setup menu NOTE When the SETUP menu is selected, using the VH-310 Handset, the GX5500S will be temporarily disabled until the VH-310 Handset exits from the setup mode. GX5500S Page 85 14.5.1 Changing the display to show Lat/Lon or Time and SOG Factory default is “Your Vessel’s Current Position,” however, following the steps below the GPS Information can be changed to “Course Over Ground (COG).” RADIO 1. Press and hold down the [CALL(MENU)] key until “RADIO SETUP SETUP” menu appears. NAV DISPLAY 2. Press the [ENT] key, then select “NAV DISPLAY” with the [S]/[T] key. 3. Press the [ENT] key. Pos (Your Vessel’s Cur4. Press the [T] or [S] key to select “Pos Cru (Course Over Ground).” rent Position)” or “Cru 5. Press the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode. 14.5.2 External Speaker AF Selection The AF SELECT menu allows you to set the audio output level of the VH-310’s External Speaker to a fixed level regardress of the VOL level setting of the VH310, which is useful when using the STANDARD HORIZON MLS-310 10W amplified speaker with on/off volume control. Radio 1. Press and hold down the [CALL(MENU)] key until “Radio Setup Setup” menu appears. AF SELECT 2. Press the [ENT] key, then select “AF SELECT” with the [S]/ [T] key. 3. Press the [ENT] key. Pr 4. Press the [S] or [T] key to select “Pr Pr” (External Speaker Po Level is “Fixed”) or “Po Po” (External Speaker Level is “Adjustable”). 5. Press the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode. Page 86 GX5500S MEMO GX5500S Page 87 15 MAINTENANCE The inherent quality of the solid-state components used in this transceiver will provide many years of continuous use. Taking the following precautions will prevent damage to the transceiver. • • • • Keep the microphone connected or the jack covered at all times to prevent corrosion of electrical contacts; Never key the microphone unless an antenna or suitable dummy load is connected to the transceiver. Ensure that the supply voltage to the transceiver does not exceed 16 VDC or fall below 11 VDC. Use only STANDARD HORIZON-approved accessories and replacement parts. In the unlikely event of serious problems, please contact your Dealer or our repair facility. Address and phone numbers for this facility, as well as warranty information, are contained in section “17 WARRANTY.” 15.1 REPLACEMENT PARTS Occasionally an owner needs a replacement mounting bracket or knob. These can be ordered from our Parts Department by writing or calling: Marine Division of Vertex Standard US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. Telephone (714) 827-7600 Commonly requested parts, and their part numbers are listed below. • Power Cord: T9023306 • VOL/SQL Knob: RA0542600 • Rotary Channel Knob: RA0542500 • Mounting Bracket: RA0544200 • Mounting Bracket Knob: RA045910A • Microphone Hanger: RA0458800 • Microphone Assembly: M3090118 • RAM+ Mic Routing Cable Assembly: S8101512 15.2 FACTORY SERVICE In the unlikely event that the radio fails to perform or needs servicing, please contact the following: Standard Horizon Attention Marine Repair Department 10900 Walker Street, Cypress, CA 90630 Telephone (800) 366-4566 An “RA” Return Authorization number is not necessary to send a product in for service. Include a brief note describing the problem along with your name, return address, phone number, and proof of purchase. Page 88 GX5500S 15.3 TROUBLESHOOTING CHART SYMPTOM PROBABLE CAUSE REMEDY Transceiver fails to power up. No DC voltage to the a. Check the 12VDC battery connections and transceiver, or blown the fuse. fuse. b. The PWR switch needs to be pressed and held to turn the radio on. Transceiver blows fuse when connected to power supply. Reversed power wires. Check the power cable for DC voltage, or replace the fuse (6A 250V). Make sure the red wire is connected to the positive (+) battery post, and the black wire is connected to the negative (-) battery post. If the fuse still blows, contact marine product support. Popping or whining noise from the speaker while engine runs. Engine noise. Reroute the DC power cables away from the engine. Add noise suppressor on power cable. Change to resistive spark plug wires and/or add an alternator whine filter. Sound is not emitted from the internal or external speaker. Accessory cable. Check the connections of the accessory cable (Short Circuit the External speaker cable WHITE/SHIELD). Sound is not emitted from the PA speaker. Accessory cable. Check the accessory cable connection (Short Circuit the PA speaker cable RED/SHIELD). Receiving station reports low transmit power, even with transceiver set to HI power. Antenna. Have the antenna checked or test the transceiver with another antenna. If the problem persists, contact your Dealer for servicing. “HI BATTERY” or “LO BATTERY” message appears when the power is turned on. The power supply voltage is too high or too low. Confirm that the connected power supply voltage is not 17 volts or lower than 10 volts. “PA ERROR” or “FOG ERROR” message is shown when the PA/ FOG mode is activated. Accessory cable. Check the accessory cable connection (Short Circuit the PA speaker cable RED/SHIELD). Your position is not displayed. Accessory cable. Check the accessory cable connection. Some GPS use the battery ground line for NMEA connection. Setting of the GPS navigation receiver. Check the output signal format of the GPS navigation receiver. This radio requires NMEA0183 format with GLL, RMB, or RMC sentence as an output signal. If the GPS has a baud rate setting make sure to select 4800 and parity to NONE. Strong AM radio stations are being pickup up by the speaker wires. Need to replace the speaker wires to a sheilded 2 conductor wire available from Radio Shack part number 278-513. Refer to section “8.3 ACCESSORY CABLE” for cable connections. While in PA or FOG listen back modes, am broadcasts can be heard. GX5500S Page 89 16 CHANNEL ASSIGNMENTS Tables on the following columns list the VHF Marine Channel assignments for U.S.A. and International use. Below are listed some data about the charts. 1. VTS. Where indicated, these channels are part of the U.S. Coast Guard’s Vessel Traffic System. 2. Alpha channel numbers, that is, channel numbers followed by the letter A (such as Channel 07A) are simplex channels on the U.S.A. or Canadian channel assignments whose counterparts in the International assignments are duplex channels. International channels do not use “alpha” numbers. If you call the Coast Guard on Channel 16, they will sometimes ask you to “go to channel 22 Alpha.” This is a channel assigned to U.S.A, and Canadian Coast Guards for handling distress and other calls. If your radio is set for International operation you will go to Channel 22 instead of 22A, and will not be able to communicate with the Coast Guard. To use Channel 22A, your radio must be set for USA or Canada operation, usually by a U/ I/C (USA/International/Canada) control or combination of controls. Channel 22 (without an “A”) is an International duplex channel for port operations. Some radios indicate an “A” adjacent to the alpha channels on the display; on others “alpha” is not indicated but the proper channel is selected based on the U/I/C setting. 3. Bridge-to-Bridge channels (for example, Channel 13) are for use by bridge operators on intercoastal waterways and rivers. It is also used by marine vessels in the vicinity of these bridges for navigation and for communicating with the bridge operators. Note that a limit of 1 Watt is specified for these channels. See page 27 for additional information. 4. The S/D column on the chart indicates either S (simplex) or D (duplex). Simplex means transmitting and receiving on the same frequency. Only one party at a time can talk, unlike a telephone. Be sure to say “over” and release your microphone push-to-talk switch at the end of each transmission. Duplex operation involves the use of one frequency for transmitting and a separate frequency for receiving. On channels specified as duplex on the charts, correct mode of operation is established automatically by your radio when you select a channel; you cannot change the mode. And you still must release the push-to-talk switch after each transmission in order to listen to the radio. 5. Channels normally used by recreational boaters are those that include the term “non-commercial” in the Channel Use column of the chart. Some of these are shared with other users and some are used only in certain geographic regions. Page 90 GX5500S 6. Marine vessels equipped with VHF radios are required to monitor Channel 16. CH 01 01A 02 03 03A 04 U C X X X X X 04A X 05 05A 06 07 X X X X 07A 08 09 X X X X X X 10 11 12 13 14 15 15 16 17 18 18A 19 19A 19A 20 X X X X X X X X X X X 20A 21 21A 22 22A X X X X X X X X X X X X X X X X GX5500S VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X D 156.050 160.650 Public Correspondence (Marine Operator) S 156.050 Port Operation and Commercial. VTS in selected areas X D 156.100 160.700 Public Correspondence (Marine Operator) X D 156.150 160.750 Public Correspondence (Marine Operator) S 156.150 US Government only, Coast Guard X D 156.200 160.800 Public Correspondence (Marine Operator), Port operation, ship movement S 156.200 Pacific coast: Coast Guard, East Coast: Commercial fishing X D 156.250 160.850 Public Correspondence (Marine Operator), Port operation, ship movement S 156.250 Port operation. VTS in Seattle X S 156.300 Inter-ship Safety X D 156.350 160.950 Public Correspondence (Marine Operator), Port operation, ship movement S 156.350 Commercial X S 156.400 Commercial (Inter-ship only) X S 156.450 Boater Calling channel, Commercial & Non-commercial (Recreational) X S 156.500 Commercial X S 156.550 Commercial. VTS in selected areas. X S 156.600 Port operation. VTS in selected areas. X S 156.650 Inter-ship Navigation Safety (Bridge-to-bridge) X S 156.700 Port operation. VTS in selected areas. S --156.750 Environmental (Receive only) X S 156.750 Commercial, non-commercial, ship movement (1 W) X S 156.800 International Distress, Safety and Calling X S 156.850 State Controlled (1 W) X D 156.900 161.500 Port operation, ship movement S 156.900 Commercial X D 156.950 161.550 Port operation, ship movement S 156.950 US: Commercial S 156.950 Coast Guard X D 157.000 161.600 Canadian Coast Guard Only, International: port operations and shipment S 157.000 Port operation X D 157.050 161.650 Port operation, ship movement S 157.050 U.S. Government Only, Canadian Coast Guard X D 157.100 161.700 Port operation, ship movement S 157.100 US and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts announced on channel 16 Page 91 CH 23 23A 24 25 26 27 28 60 61 U 61A X X X X X X X C X X X X X X X X 62 62A X 63 63A X 64 64A X X X 65A 66 X X 66A 67 X X X X 68 69 X X X X 70 X X 71 X X 72 73 X X X X 74 X X 65 Page 92 VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X D 157.150 161.750 Public Correspondence (Marine Operator) S 157.150 U.S. Government Only X D 157.200 161.800 Public Correspondence (Marine Operator) X D 157.250 161.850 Public Correspondence (Marine Operator) X D 157.300 161.900 Public Correspondence (Marine Operator) X D 157.350 161.950 Public Correspondence (Marine Operator) X D 157.400 162.000 Public Correspondence (Marine Operator) X D 156.025 160.625 Public Correspondence (Marine Operator) X D 156.075 160.675 Public Correspondence (Marine Operator), Port operation, ship movement S 156.075 U.S. Government Only, Canadian Coast GuardPacific Coast, Commercial Fishing-East Coast X D 156.125 160.725 Public Correspondence (Marine Operator), Port operation, ship movement S 156.125 Public Coast: Coast Guard; East Coast: commercial fishing only X D 156.175 160.775 Public Correspondence (Marine Operator), Port operation, ship movement S 156.175 Port Operation and Commercial. VTS in selected areas. X D 156.225 160.825 Public Correspondence (Marine Operator), Port operation, ship movement S 156.225 U.S. Government Only, Canadian Commercial Fishing X D 156.275 160.875 Public Correspondence (Marine Operator), Port operation, ship movement S 156.275 Port Operations X D 156.325 160.925 Public Correspondence (Marine Operator), Port operation, ship movement S 156.325 Port Operations X S 156.375 US: Commercial. Used for Bridge-to-bridge com munications in lower Mississippi River. Inter-ship only, Canada: Commercial fishing, S&R X S 156.425 Non-commercial (Recreational) X S 156.475 US: Non-commercial (Recreational), Canada: Commercial fishing only, International: Inter-ship, Port operations and Ship movement X S 156.525 Digital selective calling (voice communications not allowed) X S 156.575 US, Canada: Non-commercial (Recreational), International: Port operations and Ship movement X S 156.625 Non-commercial (Inter-ship only) X S 156.675 US: Port Operations, Canada: Commercial fishing only, International: Inter-ship, Port opertions and Ship movement X S 156.725 US: Port Operations, Canada: Commercial fishing only, International: Inter-ship, Port operations and Ship movement GX5500S CH 75 76 77 77 78 U X X X C 78A 79 79A 80 80A 81 81A X X X X X X X X 82A X X 83 83A X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 82 83 84 85 86 87 87 88 88 88A WX01 WX02 WX03 WX04 WX05 WX06 WX07 WX08 WX09 WX10 VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X S 156.775 Port Operations (Inter-ship only) (1W) X S 156.825 Port Operations (Inter-ship only) (1W) S 156.875 Port Operations (Inter-ship only) (1W) X S 156.875 Port Operations (Inter-ship only) X D 156.925 161.525 Public Correspondence (Marine Operator), Port operation, ship-movement S 156.925 Non-commercial (Recreational) X D 156.975 161.575 Port operation and Ship movement S 156.975 Commercial X D 157.025 161.625 Port operation, ship movement S 157.025 Commercial X D 157.075 161.675 Port operation, ship movement S 157.075 U.S. Government Only Environmental protection operations. X D 157.125 161.725 Public Correspondence (Marine Operator), Port operation, ship movement S 157.125 U.S. Government Only, Canadian Coast Guard Only X D 157.175 161.775 Canadian Coast Guard Only S 157.175 U.S. Government Only, Canadian Coast Guard Only X D 157.175 161.775 Public Correspondence (Marine Operator) X D 157.225 161.825 Public Correspondence (Marine Operator) X D 157.275 161.875 Public Correspondence (Marine Operator) X D 157.325 161.925 Public Correspondence (Marine Operator) D 157.375 161.975 Public Correspondence (Marine Operator) X S 157.375 Public Correspondence (Marine Operator) D 157.425 162.025 Public Correspondence (ship-to-coast) X S 157.425 Public Correspondence (ship-to-coast) S 157.425 Commercial, Inter-ship Only X D --162.550 Weather (receive only) X D --162.400 Weather (receive only) X D --162.475 Weather (receive only) X D --162.425 Weather (receive only) X D --162.450 Weather (receive only) X D --162.500 Weather (receive only) X D --162.525 Weather (receive only) X D --161.650 Weather (receive only) X D --161.775 Weather (receive only) X D --163.275 Weather (receive only) The above BOLD channels are not for use of the general public in U.S. waters, unless proper authorization is given. GX5500S Page 93 Points of communication (Intership and between coast and ship Coast unless otherwise indiShip transmit transmit cated) Port Operations 156.050 156.050 01A1 63A1 156.175 156.175 052 156.250 156.250 65A 156.275 156.275 66A 156.325 156.325 123 156.600 156.600 73 156.675 156.675 3 14 156.700 156.700 74 156.725 156.725 774 156.875 Intership only. 20A12 157.000 Intership only. Navigational (Bridge-to-Bridge)5 136 156.650 156.650 677 156.375 156.375 Commercial 01A1 156.050 156.050 63A1 156.175 156.175 07A 156.350 156.350 677 156.375 Intership only. 08 156.400 ........ Do. 09 156.450 156.450 10 156.500 156.500 3 11 156.550 156.550 18A 156.900 156.900 19A 156.950 156.950 79A 156.975 156.975 80A 157.025 157.025 88A8 157.425 ........ Intership only. 7214 156.625 ........ Intership only. Digital Selective Calling 7015 156.525 156.525 Channel designator Carrier frequency (MHz) Channel designator 6817 0916 69 71 72 78A 79A 80A 6714 16 06 1513 179,10 22A11 Points of communication (Intership and between coast and ship Coast unless otherwise indiShip transmit transmit cated) Noncommercial 156.425 156.425 156.450 156.450 156.475 156.475 156.575 156.575 156.625 ........ Intership only. 156.925 156.925 156.975 156.975 Great Lakes only. 157.025 157.025 Do. 156.375 ....... Intership only. Distress, Safety and Calling 156.800 156.800 EPRIB Intership Safety 156.300 ........ a. Intership, or b. For SAR: Ship and aircraft for the U.S. Coast Guard. Environmental ........ 156.750 Coast to ship only. Maritime Control 156.850 156.850 Liaison, U.S. Coast Guard 157.100 157.100 Ship, aircraft, and coast stations of the U.S. Coast Guard and at Lake Mead, Nev., ship and coast stations of the National Park Service, U.S. Department of the Interior. Carrier frequency (MHz) 1: 156.050 MHz and 156.175 MHz are available for port operations and commercial communications purposes when used only within the U.S. Coast Guard designated Vessel Traffic Services (VTS) area of New Orleans, on the lower Mississippi River from the various pass entrances in the Gulf of Mexico to Devil’s Swamp Light at River Mile 242.4 above head of passes near Baton Rouge. 2: 156.250 MHz is available for port operations communications use only within the U.S. Coast Guard designated VTS radio protection areas of New Orleans and Houston described in Sec. 80.383. 156.250 MHz is available for intership port operations communications used only within the area of Los Angeles and Long Beach harbors, within a 25nautical mile radius of Point Fermin, California. 3: 156.550 MHz, 156.600 MHz and 156.700 MHz are available in the U.S. Coast Guard designated port areas only for VTS communications and in the Great Lakes available primarily for communications relating to the movement of ships in sectors designated by the St. Lawrence Seaway Development Corporation or the U.S. Coast Guard. The use of these frequencies outside VTS and ship movement sector protected areas is permitted provided they cause no interference to VTS and ship movement communications in their respective designated sectors. Page 94 GX5500S 4: Use of 156.875 MHz is limited to communications with pilots regarding the movement and docking of ships. Normal output power must not exceed 1 watt. 5: 156.375 MHz and 156.650 MHz are available primarily for intership navigational communications. These frequencies are available between coast and ship on a secondary basis when used on or in the vicinity of locks or drawbridges. Normal output power must not exceed 1 watt. Maximum output power must not exceed 10 watts for coast stations or 25 watts for ship stations. 6: On the Great Lakes, in addition to bridge-to-bridge communications, 156.650 MHz is available for vessel control purposes in established vessel traffic systems. 156.650 MHz is not available for use in the Mississippi River from South Pass Lighted Whistle Buoy “2” and Southwest Pass entrance Midchannel Lighted Whistle Buoy to mile 242.4 above Head of Passes near Baton Rouge. Additionally it is not available for use in the Mississippi River-Gulf Outlet, the Mississippi River-Gulf Outlet Canal, and the Inner Harbor Navigational Canal, except to aid the transition from these areas. 7: Use of 156.375 MHz is available for navigational communications only in the Mississippi River from South Pass Lighted Whistle Buoy “2” and Southwest Pass entrance Midchannel Lighted Whistle Buoy to mile 242.4 above head of Passes near Baton Rouge, and in addition over the full length of the Mississippi River-Gulf Outlet Canal from entrance to its junction with the Inner Harbor Navigation Canal, and over the full length of the Inner Harbor Navigation Canal from its junction with the Mississippi River to its entry to Lake Pontchartrain at the New Seabrook vehicular bridge. 8: Within 120 km (75 miles) of the United States/Canada border, in the area of the Puget Sound and the Strait of Juan de Fuca and its approaches, 157.425 MHz is half of the duplex pair designated as Channel 88. In this area, Channel 88 is available to ship stations for communications with public coast stations only. More than 120 km (75 miles) from the United States/Canada border in the area of the Puget Sound and the Strait of Juan de Fuca, its approaches, the Great Lakes, and the St. Lawrence Seaway, 157.425 MHz is available for intership and commercial communications. Outside Puget Sound area and its approaches and the Great Lakes, 157.425 MHz is also available for communications between commercial fishing vessels and associated aircraft while engaged in commercial fishing activities. 9: When the frequency 156.850 MHz is authorized, it may be used additionally for search and rescue training exercises conducted by state or local governments. 10: The frequency 156.850 MHz is additionally available to coast stations on the Great Lakes for transmission of scheduled Coded Marine Weather Forecasts (MAFOR), Great Lakes Weather Broadcast (LAWEB) and unscheduled Notices to Mariners or Bulletins. F3C and J3C emissions are permitted. Coast Stations on the Great Lakes must cease weather broadcasts which cause interference to stations operating on 156.800 MHz until the interference problem is resolved. 11: The frequency 157.100 MHz is authorized for search and rescue training exercises by state or local government in conjunction with U.S. Coast Guard stations. Prior U.S. Coast Guard approval is required. Use must cease immediately on U.S. Coast Guard request. 12: The duplex pair for channel 20 (157.000/161.600 MHz) may be used for ship to coast station communications. 13: Available for assignment to coast stations, the use of which is in accord with an agreed program, for the broadcast of information to ship stations concerning the environmental conditions in which vessels operate, i.e., weather; sea conditions; time signals; notices to mariners; and hazards to navigation. 14: Available only in the Puget Sound and the Strait of Juan de Fuca. 15: The frequency 156.525 MHz is to be used exclusively for distress, safety and calling using digital selective calling techniques. No other uses are permitted. 16: The frequency 156.450 MHz is available for intership, ship and coast general purpose calling by noncommercial vessels, such as recreational boats and private coast stations. 17: The frequency 156.425 MHz is assigned by rule to private coast stations in Alaska for facsimile transmissions as well as voice communications. GX5500S Page 95 17 WARRANTY Marine Products Limited Warranty STANDARD HORIZON (a division of VERTEX STANDARD) warrants, to the original purchaser only, each new Marine Communications Product (“Product”) manufactured and/or supplied by STANDARD HORIZON against defects in materials and workmanship under normal use and service for a period of time from the date of purchase as follows: Fixed Mount and Portable Transceivers 1 year - if purchased before 01/01/91 3 years - if purchased between 01/01/91 and 01/01/94 3 years Waterproof - if purchased after 01/01/94 Loud hailers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Chargers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Batteries - 18 months. Note: Batteries will be deemed deflective only if storage capacity drops below 80% of rated capacity or if leakage develops. Associated Accessories - 1 year. Includes: Microphones/Handsets, External Speakers, Antennas, Carrying Accessories, Power Supplies, and Signaling Boards. To receive warranty service, the purchaser must deliver the Product, transportation and insurance prepaid, to STANDARD HORIZON (a division of VERTEX STANDARD), Attention Marine repairs 10900 Walker Street, Cypress, CA 90630. Include proof of purchase indicating model. serial number, and date of purchase. STANDARD HORIZON will return the Product to the purchaser freight prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD HORIZON warranty terms in effect prior to that date. In the event of a defect, malfunction or failure of the Product during the warranty period, STANDARD HORIZON’s liability for any breach of contract or any breach of express or implied warranties in connection with the sale of Products shall be limited solely to repair or replacement, at its option, of the Product or part(s) therein which, upon examination by STANDARD HORIZON, appear to be defective or not up to factory specifications. STANDARD HORIZON may, at its option, repair or replace parts or subassemblies with new or Page 96 GX5500S reconditioned parts and subassemblies. Parts thus repaired or replaced are warranted for the balance of the original applicable warranty. STANDARD HORIZON will not warrant installation, maintenance or service of the Products. In all instances, STANDARD HORIZON’s liability for damages shall not exceed the purchase price of the defective Product. This warranty only extends to Products sold within the 50 States of the United States of America and the District of Columbia. STANDARD HORIZON will pay all labor to repair the product and replacement parts charges incurred in providing the warranty service except where purchaser abuse or other qualifying exceptions exist. The purchaser must pay any transportation expenses incurred in returning the Product to STANDARD HORIZON for service. This limited warranty does not extend to any Product which has been subjected to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD HORIZON, improper installation, or subjected to use in violation of instructions furnished by STANDARD HORIZON, nor does this warranty extend to Products on which the serial number has been removed, defaced, or changed. STANDARD HORIZON cannot be responsible in any way for ancillary equipment not furnished by STANDARD HORIZON which is attached to or used in connection with STANDARD HORIZON’s Products, or for the operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. STANDARD HORIZON disclaims liability for range, coverage, or operation of the Product and ancillary equipment as a whole under this warranty. STANDARD HORIZON reserves the right to make changes or improvements in Products, during subsequent production, without incurring the obligation to install such changes or improvements on previously manufactured Products. The implied warranties which the law imposes on the sale of this Product are expressly LIMITED, in duration, to the time period specified above. STANDARD HORIZON shall not be liable under any circumstances for consequential damages resulting from the use and operation of this Product, or from the breach of this LIMITED WARRANTY, any implied warranties, or any contract with STANDARD HORIZON. IN CONNECTION WITH THE SALE OF ITS PRODUCTS, STANDARD HORIZON MAKES NO WARRANTIES, EXPRESS OR IMPLIED AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, EXCEPT AS EXPRESSLY SET FORTH HEREIN. GX5500S Page 97 Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY. ON-LINE WARRANTY REGISTRATION THANK YOU for buying STANDARD HORIZON (a division of Vertex Standard) products! We are confident your new radio will serve your needs for many years! Please visit www.standardhorizon.com to register the GX5500S Marine VHF. It should be noted that visiting the Web site from time to time may be beneficial to you, as new products are released they will appear on the STANDARD HORIZON Web site. Also a statement regarding product support should be added to the manual. Product Support Inquiries If you have any questions or comments regarding the use of the GX5500S, you can visit the STANDARD HORIZON Web site to send an E-Mail or contact the Product Support team at (714) 827-7600 ext 6300 M-F 7:00-5:00PST. In addition to the warranty, STANDARD HORIZON includes a lifetime “flat rate” and “customer loyalty” programs to provide service after the warranty period has expired. If you wish to obtain the flat rate price for out-of-warranty repair, you must include the information on the Owner’s Record with the unit when you return it to your Dealer or to STANDARD HORIZON. Lifetime Flat Rate Service Program: For the original Owner only, for the lifetime of the unit, STANDARD HORIZON will repair the unit to original specifications. Note: The flat rate amount is payable by the Owner only if STANDARD HORIZON or the STANDARD HORIZON Dealer determines that a repair is needed. After the repair, a 90-day warranty will be in effect from the date of return of the unit to the Owner. This service program is not available for equipment which has failed as a result of neglect, accident, breakage, misuse, improper installation or modification, or water damage (depending on the product). Page 98 GX5500S 18 SPECIFICATIONS Performance specifications are nominal, unless otherwise indicated, and are subject to change without notice. 18.1 GENERAL Channels ............................................... All USA, International and Canadian Input Voltage ......................................................................... 13.8 VDC ±20% Current Drain Standby ............................................................................................. 0.5 A Receive ............................................................................................. 1.5 A Transmit ..................................................................... 5.0 A (Hi); 1.5 A (Lo) Dimensions ............................................................... 3.5” H x 9.1” W x 5.9” D (90 H x 230 W x 150 D mm) Flush-Mount Dimensions .......................................... 2.8” H x 8.1” W x 5.1” D (72 H x 205 W x 130 D mm) Weight ................................................................................... 3.2 lbs (1.45 kg) 18.2 TRANSMITTER Frequency Range .................................................... 156.025 to 157.425 MHz RF Output ......................................................................... 25 W (Hi); 1 W (Lo) Conducted Spurious Emissions ................................... 80 dB (Hi); 66 dB (Lo) Audio Response ................................................ within +1/-3 of a 6 dB/octave pre-emphasis characteristic at 300 to 3000 Hz Audio Distortion ........................................................................................ 5 % Modulation ........................................................ 16K0G3E, for DSC 16K0G2B Frequency Stability (-20°C to +60°C) ..............................................±0.0005% FM Hum and Noise ............................................................................... 50 dB 18.3 RECEIVER Frequency Range .................................................... 156.050 to 163.275 MHz Sensitivity 20 dB Quieting .............................................................................. 0.35 μV 12 dB SINAD ................................................................................. 0.30 μV Squelch Sensitivity (Threshold) ..................................................... 0.13 μV Modulation Acceptance Bandwidth ...................................................±7.5 kHz Selectivity (Typical) Spurious and Image Rejection ....................................................... –80 dB Intermodulation and Rejection at 12 dB SINAD ............................. –80 dB Audio Output ......................................................................................... 4.5 W Audio Response ............................................... within + 1/–3 of a 6 dB/octave de-emphasis characteristic at 300 to 3000 Hz Frequency Stability (-20°C to +60°C) .............................................±0.0005 % Channel Spacing ................................................................................. 25 kHz DSC Format ................................................................................. EN 301 025 NMEA Input/Output .......................................................... Output - DSC, DSE Input - GLL, GGA, RMC and GNS GX5500S Page 99 Marine Division of VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. www. standardhorizon.com E M 0 Page 100 2 8 N 2 0 Copyright 2007 VERTEX STANDARD CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. 0 GX5500S ">
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Commercial Grade ITU Class D DSC capability
Superior receiver performance (80 dB rejection)
30W Loud Hailer with Listen Back and 4 Fog Horns
NAV mode displays Latitude/Longitude, SOG, COG
One-Button Access to Channel 16 and 9
Two Inputs for Optional RAM+ or VH-310 Remote Microphone
DSC (Digital Selective Calling) Class D allows continuous receiving of DSC functions on channel 70 even when the radio is receiving a call.
The GX5500S supports NMEA-0183 version 2.0 or higher. Input: GLL, GGA, RMC and GNS (RMC sentence is recommended). Output: DSC and DSE.
Press and hold the [CALL(MENU)] key, select "Time Offset" with the CHANNEL selector knob. Turn the CHANNEL selector knob to select time offset from UTC, then press the [ENT] key to store.
Press and hold the [CALL(MENU)] key, select "Tone Control" with the CHANNEL selector knob.
The antenna must be located at least 0.89 m (2.92 feet) away from passengers in order to comply with the FCC RF exposure requirements.
How to disable a DSC alarm that is currently sounding?
To disable the DSC distress alarm signal from the speaker, press any key, according to the viewed manual. Be aware that emergency alarms and beeps for DSC operation cannot be turned OFF (see section 12.9).
How to reduce the number of audible alerts received from the DSC?
You can disable the individual or group call ringer, which could reduce the number of audible alerts you receive. See section 11.5.3 in the manual.
Login to continue
