Accent Builders Hardware DS-1001CP Polished Chrome Magnetic Door Stop Installation Guide
Advertisement
Advertisement
DS-1001
Description : Magnetic Door Stop
Material: Zinc Alloy
Finishings Available: Bright Brass, Polished Chrome
Size: (Diameter) 45 x (Height) 75mm (3 inches height)
Packaging: 1 pc + Fastener/polybag
Installation Instructions:
1. Open the door to the point where you want it to stop. Ensure the doorknob is approximately 2 inches from the wall.
2. Draw a line where the door opens to before the wall.
3. Find a spot where you would like to install the stop on the floor.
4. Make a pencil mark 1/2 inch away door mark line, in the direction of the door's swing when opening.
5. Secure the stop on the floor, with the magnetic surface facing toward the door.
6. Find the position on the door where the catch should go to align with the stop.
7. Make a pencil mark on the door in the center of the area where the catch will be.
8. Secure catch to door using mark as a guide.

Public link updated
The public link to your chat has been updated.
Advertisement