CURT 13082 Class 3 Trailer Hitch for GM 1500/2500/3500 Classic Installation Guide

Add to My manuals
1 Pages

advertisement

CURT 13082 Class 3 Trailer Hitch for GM 1500/2500/3500 Classic Installation Guide | Manualzz

13082

6/23/2020

1988-00 CHEVY/GMC 1500(OLD STYLE)

1992-00 CHEVY/GMC 4DR CREW CAB ONLY

WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY. ***

FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.COM

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 877-287-8634

ITEM QTY

1 8

PART NUMBER

CM-SP1

2 2 30-00149

3

4

5

6

2

4

4

2

10-10458

10-10288

20-00062

20-00136

Parts List

DESCRIPTION

.250 x 1.50 x 2.00" SQUARE HOLE SPACER

WASHER,S-CON,1/2,YZ

HHCS,M12x1.75,50,CL10.9

BOLT,CAR,1/2-13 UNC,2,GRD8,YZ

NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ

NUT,HEX,M12x1.75,CL10,YZ

EXISTING HOLE

PASSENGER SIDE

FRAME RAIL

4

EXISTING WELDNUT, IF NOT,

USE M12 NUT AND SP1

(BOTH SIDES)

6

1

DRIVER SIDE

FRAME RAIL

HOLE LOCATIONS MAY VARY

ON DIFFERENT MODEL YEARS

2

3

5

INSTALL TIME

INSTALL NOTES:

- NO DRILLING REQUIRED

- LOWER SPARE TIRE

INSTALLATION STEPS

1) Lower the spare tire. The rear bolt in the bottom of the frame on each side must be removed, if equipped

with factory step bumper. Clean away any mud and undercoating present.

2) Position the receiver against the frame. The large cut outs in the hangers should clear rivets and cross

member bolts.

3) Secure the hitch to vehicle using all existing holes in vehicle frame as illustrated above.

4) Reposition spare tire slightly forward to clear hitch. Oversized spare tire may have to be relocated.

5) Torque all 1/2" fasteners to 110 lb.-ft. and all M12 fasteners to 86 lb.-ft.

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS

ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

1

2

3

4

5

6

REV

GENERIC INSTRUCTION SHEET

UPDATED TO CURRENT STANDARD

ADDED M12-1.75

CHG TO GRADE 8 TORQUE SPECS updated years (was 1988-98 and 1992-98), updated template

UPDATED HARDWARE DESCRIPTIONS/NUMBERS

DESCRIPTION

REVISION HISTORY

8/21/2007

12/5/2008

3/24/2010

10/1/2012

5/15/2018

6/23/2020

DATE

DWS

CJL

SMN

AJP

KWS

CJW

APPROVED

advertisement

Related manuals

Download PDF

advertisement