Glacier Bay ACS2318A1-F Gunmetal Black Stainless Steel 23 in. 18-Gauge Single Bowl Undermount Bar Sink Installation Guide

Glacier Bay ACS2318A1-F Gunmetal Black Stainless Steel 23 in. 18-Gauge Single Bowl Undermount Bar Sink Installation Guide | Manualzz
OS |
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. — 7 p.m., EST, Monday-Friday, 9 a.m. — 6 p.m., EST, Saturday
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen sink. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Glacier Bay!
Table of Contents
Safety Information .......,..........,..,..,....... 2 Undermount Installation. ...........,...,.....,..,... 5
Warranty...........,..,,,.,.4.4.4ssssssseneueuss 2 Care and Maintenance ................,.,.,.,.,.... 6
Pre-Installation ..............,.,..,,..,,,..,.....: 3
Safety Information
Before installing this sink, read this instruction manual carefully.
It contains important information concerning the safe installation,
operation, and maintenance of your sink.
WARNING: Keep all the packaging materials out of the
reach of children to prevent possible choking or suffocation.
Retain this manual for future use. In the event of a sale, transfer, or
WARNING: Use caution when installing the sink. There is
relocation, ensure this manual remains with the sink.
a risk of crushing your fingers when inserting the sink into
NOTICE: Avoid leaving wet sponges, salt, and corrosive substances the installation location.
on the sink for long periods of time. Lines and scratches may be
caused by improper use of the sink.
CAUTION: Never place hot objects such as hot pans
on the sink. Wait until the object has cooled or use a heat
> РР
resistant plate when placing hot objects on the sink surface.
NOTICE: Do not place the sink on its side as there is a risk of
This limited lifetime warranty is extended to the original purchaser of this sink. The manufacturer warrants this sink to be free from all
manufacturing defects in material and workmanship. The manufacturer will repair or replace, at no charge, excluding labor, any sink
that is proven to be defective under normal use. An equivalent replacement will be issued to the original owner provided the defective
sink was installed in accordance with the installation procedures, used and cleaned as recommended, and not damaged due to abuse,
misuse, or negligence. Chips, scratches, and stains are not deemed to be manufacturing defects. The manufacturer will not be held
liable for chips, scratches, and stains that can occur under normal use over a period of time. Please refer to the cleaning instructions
to maintain your sink in its original appearance. The manufacturer shall not be held liable under this warranty where the sink has been
used in a non-domestic application, improperly installed, or damaged from the impact caused by a heavy object being dropped on the
sink of from improper handling.
The manufacturer shall not be liable for any inconvenience or expense for material or labor related to the removal or replacement of a
defective sink or for any loss or damage to any person or property whatsoever resulting from the defective sink. All transportation costs
to and from the point of purchase will be the responsibility of the purchaser.
Any sink returned must be in the original packaging and include all the accompanying accessories, parts, and documentation. The
manufacturer reserves the right to inspect any sink reported to be defective prior to replacement of the sink.
Excluded are any accessories that accompany the sink (strainer, bottom grid, etc.). The manufacturer guarantees all sink accessories to
be free from manufacturing defects for one year. The manufacturer is not responsible or liable for indirect, special, or consequential
damages arising out of or in connection with the use or performance of its products and its liability under this warranty is limited to the
replacement of the defective material at the location of purchase.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. The manufacturer
makes no additional warranties, express or implied, and any implied warranty including that of merchantability or fitness for a
particular purpose is limited in its duration to the duration of the written limited warranties set forth herein.
No employee, agent, or other person is authorized to provide any warranty on behalf of The Home Depot for a Glacier Bay product that is in
addition to or different from the warranty stated above unless the warranty has been previously approved by an authorized representative.
This warranty gives you specific legal rights and you may also have other rights which may vary from province to province.
Contact the Customer Service Team at 1-855-HD-GIACIER or visit www.HOMEDEPOT.COME/GLACIERBAY.
Compare all the parts to the Hardware Included and Package Contents lists and verify that all the parts are included. Inspect all the
parts for damage. If there are missing parts or visible damage to the sink, do not install and contact the Customer Service Team at
Silicone 4) phillips Hammer
Qe sealant CLA] Safety goggles i screwdriver
Drill and
drill bit Plumber's putty
A NOTE: Hardware is not shown to actual size.
Part | Description Quantity
AA Undermount clip 10
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation (continued)
Model# Bowls Picture Package Contents
. Sink
. Cut-Out Template
ACS2318A1-F Single , Mounting Hardware
| . Strainer
ES . Bottom Grid
. Faucet
A EC >
| <>
| =>
Undermount cut-out template
Stainer basket
Stainer bowl
Stainer ring
Paper washer
Rubber washer
Plastic joint
Connecting nut
Bottom grid
же SOT OI >
Please contact 1-855-HD-GLACIER for further assistance.
1 Preparing the installation location
NOTICE: It is strongly suggested that you contact a professional
countertop fabricator when installing the sink as an undermount.
C1 Provide appropriate clearance for the faucet, the water
supply lines, the drain assembly, the garbage disposal
and the structural parts of the cabinet.
[_] If your sink does not already have an existing installation
location, place the cut-out template (B) on the sink
installation location and trace the locations to cut out.
[_] Cut out the location for the sink.
2 Installing the sink
Locate and drill the mounting holes, following the countertop
manufacturer's instructions. The holes should allow even spacing
of the mounting brackets around the sink (A).
With the countertop inverted (upside down), fasten the
mounting brackets to the countertop loosely.
Clean the bottom of the countertop and the top flange (or lip)
of the sink (A).
Apply a narrow bead of silicone adhesive sealant (not included)
evenly all around the top of the sink flanges.
Position and align the sink over the countertop opening. Press
the silicone onto the countertop.
Tighten the fasteners until the mounting brackets are snug
against the sink. Check the alignment of the sink to the countertop
Tighten the fasteners evenly. Be careful not to over-tighten.
Immediately remove any excess sealant.
Please contact 1-855-HD-GLACIER for further assistance.
3 Installing the drain assembly
[] Place the sink (A) into the installation hole to verify the fit. Adjust
the cutout if necessary.
[1 Install the strainer assembly (C-J) as these steps describe. It is
easier to install the strainer assembly (C-J) to the sink (A) before
the sink is installed to the cabinet.
1) Apply a small amount of plumber’s putty (not included) in the notch
around the drain hole of the sink (A). Place the strainer ring (E) on
top of the drain hole in the sink (A).
2) Put strainer basket (C) into the strainer bowl (D) and place this
assembly into the drain hole in the sink (A).
3) From underneath the sink (A), place the paper washer (F), rubber
washer (G), locknut (H), plastic joint (I), and connecting nut (J) under
the drain hole in the sink (A).
4) Tighten the locknut (H) to hold the strainer assembly securely in
A Putting on the grid .
[1 Place the bottom grid (К) into the sink (A).
C1 If you have a double bowl sink, install the assembly and put
on the grid in the same way for the second bowl.
Care and Maintenance
[| Do not use abrasive cleaning creams or powders, concentrated caustic soda, formic acid, or anything highly corrosive. For more
information on removing difficult stains, contact customer service at 1-855-HD-GLACIER or visit your local Home Depot store.
[| Clean with a sponge or soft dish cloth and gentle sink soap. For stains that are difficult to remove, such as calcium deposits, use
eraser sponges, vinegar-based cleaners, and lime removers.
|_| Rinse the sink with hot water and dry the sink with a soft absorbent cloth.
[] Fruit juices, coffee, and tea can stain the surface of your sink if not removed. Rinse or wipe the sink prompily after these substances
make contact with the sink.
[1 Never use steam or high-pressure cleaning systems to clean your sink.
Please contact 1-855-HD-GLACIER for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. — 6 p.m., EST, Saturday
Retain this manual for future use.
Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF