Cheetah V860 Instruction manual

Thank you for purchasing this product.

V

seires flash is the world’s first Li-ion powered camera flash, pioneering innovation in the industry. The LiPo battery obviously enhances recycle, runtime, mobility, and portability performance.

This model applies to Nikon DSLR cameras and is compatible with

Nikon i-TTL autoflash. With this i-TTL compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments. This camera flash features:

●

GN58 (m ISO 100, @105mm). Adjust from 1/1 to 1/128 in 1/3rd stops

●

Support Nikon i-TTL autoflash, Manual and Multi flash modes

●

Workable as optic wireless Master and Slave unit in a group

●

Pro 2000 mAh Li-ion Battery―max. 1.5s recycle―650 full power pops

● Super value and no messing with AA’s, external power pack, or chargers

●

Use optional FT-16S to adjust flash parameters & trigger the flash

●

Stable consistency and color temperature with good even lighting

●

User-friendly LCD display & control panel with firmware upgrade

1

2

The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects:

CL

-Tx/V-Rx power & trigger control, Car charger, Mini softbox,

White & Silver reflector, Honeycomb, Color gels, Snoot, etc.

Wireless Control Function

The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering.

To control the flash wirelessly, you need a CL

-

Tx/

V

-

Rx remote control set (on-camera and on-flash).

Insert its receive end into the Wireless Control

Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoe-mounted transmit and receive ends will be wirelessly communicated to the flash. Then you can press the camera shutter release button to trigger the flash. You can also hold the transmit end at hand to control your off-camera flash.

V-RX

●

When the flash unit receives wireless signals, is shown on the LCD display.

●

For full instructions on the use of CL

-Tx/V-Rx series remote control, see its user manual.