HOMEDEPOT D-GG071PST Assembly Instructions Manual
PDF
Download
Document
Advertisement
Advertisement
Assembly Instructions Item#: D-GG071PST FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY AND OPERATING INSTRUCTIONS PRIOR TO USING GAZEBO. KEEP THESE INSTRUCTIONS FOR FUTURE USE. Warning This unit is heavy. Do not assemble this item alone. Read and follow all Warnings & Assembly Instructions before attempting to assemble. Some parts may contain sharp edges. Wear protective gloves if necessary. For safety reasons, please keep kids and pets away from the construction area of the gazebo. Children and pets should be supervised when they are in the area of the gazebo construction. Begin the assembly at least 6’ (1.8 m) away from any obstruction, such as a fence, garage, house, overhanging branches, laundry line, or electrical wires. Install this gazebo on level ground. Check all bolts for tightness before use, and periodically check and tighten bolts as necessary. Important: For technical assistance on assembly or replacement parts. Please call Sunjoy Industries at 1-866-578-6569 from 8:00 am EST to 8:00 pm PST or fax the replacement part form which is in the box to 1-740-283-3549 or Email [email protected] for assistance. 1/6 Limited Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of one (1) year. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Maintenance: Our iron/steel components for garden accessories and furniture are coated with rust inhibiting paint that protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult to remove. This can be prevented if measure is taken to keep the product from oxidizing. 2/6 Parts List Post 1 A 2 Post 2 B 2 Top curved beam C 2 Hook beam D 1 Hook E 2 Big top cover 1 F1 2 Big top cover 2 F2 2 Small top cover 1 G1 1 Small top cover 2 G2 1 Bottom shelf H 2 Top beam I 2 Shelf J 2 Connector K 4 Shelf supporter L 4 Hardware Pack 1 AA M6X15 Bolt 52PCS BB M6 Washer 60PCS CC M6X35 Bolt 8PCS Z M6 Wrench 2PCS 3/6 Fig.1: Put Top curved beam(C) into the Post (A) and Post (B), fasten them by using Bolt (AA) and Washer (BB). Fig.2: Attach the assembled Post (A) and Post (B) to the Top beam (I) by using Bolt (AA) and Washer (BB). Fig.3: Put the Bottom shelf (H) between the Post (A) and Post (B), then assemble them by using Bolt (CC) and Washer (BB). 4/6 Fig4: Attach the Connector (K) and Shelf supporter (L) to the Post (A) and Post (B) by using Bolt (AA) and Washer (BB)。 Fig5: Put the Shelf (J) on the Connector (K) and Shelf supporter (L),then fasten them by using Bolt (AA) and Washer (BB)。 Fig6: Attach the Hook beam(D) to the Top curved beam (C) by using Bolt (AA) and Washer (BB)。 Fig7: Screw the Hook (E) to the Hook beam (D) along the direction of arrow. Hardware Pack 2 DD M6X25 Bolt 24 PCS BB M6 Washer 24PCS EE Stake ¢8*180 8 PCS 5/6 Fig8: Attach the Small top cover 1 (G1) to the top part of the Top curved beam(C) by using Bolt (DD) and Washer (BB). Fig9: Attach the Small top cover 2 (G2) to the top part of the Top curved beam(C) by using Bolt (DD) and Washer (BB). Fig10: Attach the Big top cover 1 (F1) to the bottom part of the Top curved beam(C) and Post by using Bolt (DD) and Washer (BB). Fig11: Attach the Big top cover 2 (F2) to the bottom part of the Top curved beam(C) by using Bolt (DD) and Washer (BB). Fig12: Fix the assembled grill gazebo to the ground by using Stake (HH). Spare Hardware Pack AA M6X15 Blot 5PCS BB M6 Washer 7PCS CC M6X35 Bolt 2PCS DD M6X25 Bolt 3PCS Made in China 2016-1 6/6 ">

Public link updated
The public link to your chat has been updated.
Advertisement