Allen-Bradley PowerFlex 20-COMM-E EtherNet/IP Adapter User Manual

Allen-Bradley PowerFlex 20-COMM-E EtherNet/IP Adapter is designed for use with PowerFlex 7-Class drives, providing network communication capabilities. It enables seamless connectivity to control and monitor your drive system. The adapter features various configuration options, including user-defined fault actions and web pages for detailed monitoring and diagnostics.

PDF Download
Document
Allen-Bradley PowerFlex 20-COMM-E EtherNet/IP Adapter User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Network communication
  • PowerFlex 7-Class drive support
  • Status indicators
  • Configurable I/O
  • Explicit Messaging
  • Master-Slave or Peer-to-Peer hierarchy
  • Web pages for monitoring
  • E-mail messaging for alerts

Frequently asked questions

The adapter is compatible with PowerFlex 70, 700, 700H, 700S, 700L, and 750-Series drives, as well as PowerFlex Digital DC drives and SMC Flex smart motor controllers. Please refer to the manual for specific firmware requirements and limitations.

You can configure the IP address, subnet mask, and gateway address using the PowerFlex HIM on the drive (if available), the Connected Components Workbench software, or a BOOTP server. You can also set these values manually using parameters.

The adapter provides fault action options for both I/O messaging communication disruptions and controllers in idle mode. These actions determine how the adapter and connected drive respond to these events.
Preparing document for printing…
0%