AX93501 2-channel IEEE-1394b PCI Express Card
AX93501
2-channel IEEE-1394b
PCI Express Card
User’s Manual
Disclaimers
This manual has been carefully checked and believed to contain
accurate information. AXIOMTEK Co., Ltd. assumes no responsibility
for any infringements of patents or any third party’s rights, and any
liability arising from such use.
AXIOMTEK does not warrant or assume any legal liability or
responsibility for the accuracy, completeness or usefulness of any
information in this document. AXIOMTEK does not make any
commitment to update the information in this manual.
AXIOMTEK reserves the right to change or revise this document
and/or product at any time without notice.
No part of this document may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior
written permission of AXIOMTEK Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is
recommended by the manufacturer that you follow the manufacturer’s
instructions to only replace the same or equivalent type of battery,
and dispose of used ones.
©Copyright 2008 AXIOMTEK Co., Ltd.
All Rights Reserved
October 2008, Version A1
Printed in Taiwan
ii
ESD Precautions
The cards are sensitive to static electricity. To prevent any
electrostatic discharge damage, please take care of the following jobs
with precautions:
„
Do not remove the cards or components from their anti-static
packaging until you are ready to install them.
„
Before holding the cards or components, touch an unpainted
portion of the system unit chassis for a few seconds. It
discharges static electricity from your body.
„
Wear a wrist-grounding strap, available from most electronic
component stores, when handling cards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
Product names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their
respective companies.
Other brand names and trademarks are the properties and registered
brands of their respective owners.
iii
Table of Contents
Disclaimers ........................................................................................................... ii
ESD Precautions ................................................................................................. iii
CHAPTER 1 INTRODUCTION ..................................................................................... 1
1.1
Features .................................................................................................. 2
1.2
Specifications .......................................................................................... 2
CHAPTER 2 HARDWARE REFERENCE .................................................................... 3
2.1
Adapter Appearance ............................................................................... 3
2.2
Adapter Dimensions ................................................................................ 4
2.3
Hardware Installation............................................................................... 5
CHAPTER 3 INSTALLATION OF DRIVERS ............................................................... 7
iv
AX93501 User’s Manual
CHAPTER 1
INTRODUCTION
The IEEE-1394b interface is a serial standard bus for high-speed
communication and isochronous real-time data transfer. The IEEE1394b transfer rate is up to 800Mbps and device distances can now
be up to 100 meters.
The AX93501 supports two channel IEEE-1394b ports on a PCI
express x1 card. The AX93501 provides IEEE 1394b bilingual
connectors with locking screw for reliable connection between the
AX93501 and devices, such as camera, hard drive, RAID, and
complaint IEEE 1394a device. It also supports plug and play
connectivity for IEEE 1394.b devices and peripherals.
Introduction
1
AX93501 User’s Manual
1.1
Features
z
2-channel IEEE-1394b Fire Wire 800
z
PCI Express x1 compliant
z
High-speed transfer rates up to 800Mbps
z
Locking screw connector
z
Supports Plug and Play
1.2
Specifications
Bus
z
„
PCI-Express X 1 lanes
z
Connector
„ Two 9 pin IEEE 1394b connectors with locking screw
z
Operation Temperature
„
0°C ~ 60°C
z
Humidity
„
0% ~ 90%
z
Certification
„
CE
Support O.S.
z
„
Microsoft Window
®
®
XP, Window Vista
Dimensions (W x H)
„
93.98mm x 64.4mm
z
NOTE All specifications and images are subject to change
without notice.
2
Introduction
AX93501 User’s Manual
CHAPTER 2
HARDWARE REFERENCE
2.1
Adapter Appearance
1394b
Port 1
1394b
Port 2
PCI Express x 1
interface
Hardware Reference
3
AX93501 User’s Manual
2.2
4
Adapter Dimensions
Hardware Reference
AX93501 User’s Manual
2.3
Hardware Installation
Please follow these steps to install the AX93501 card on the PCI
express bus:
1.
Remove the computer cover using the instructions from the
computer manual.
2.
Check that there is an empty PCI express slot. If there is not
an empty slot, remove a PCI express board from the
computer to make room for the AX93501 card and take note
of the chosen slot number.
3.
Remove the blank metal plate located at the back of the
selected slot (if any). Keep the removed screw to fasten the
AX93501 card after installation.
4.
Carefully position the AX93501 card in the selected PCI
express slot as illustrated below. If using a tower computer,
align the board with the board slots.
5.
Press the board firmly, but carefully into the connector.
6.
Anchor the board by replacing the screw.
7.
Connect device via 1394b connector.
8.
Turn on the computer.
NOTE The AX93501 can be installed in a PCI express x1, x4, x8,
and x16 slot.
Hardware Reference
5
AX93501 User’s Manual
MEMO
6
Hardware Reference
AX93501 User’s Manual
CHAPTER 3
INSTALLATION OF DRIVERS
Installing Chipset Driver
1. Please visit http://www.unibrain.com/download/download.asp
download ubCore version x.xx for Windows driver. (Notice:
don’t get ubCorePro verion driver)
2. Run the ubCore.EXE program.
Installation of Drivers
7
AX93501 User’s Manual
8
3.
Click “Next” to next step.
4.
An Unibrain License Agreement appears to show you the
important information. Click “Yes” to next step.
®
Installation of Drivers
AX93501 User’s Manual
5.
Please enter your information below:
6.
Select destination folder, click “Next” to next step.
Installation of Drivers
9
AX93501 User’s Manual
10
7.
Select setup type:
9.
Click “Finish” to complete the setup process. And restart your
computer.
Installation of Drivers
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement