6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-UPTR8701WT
For Style UPTR8701WT
Please go to www.quoizel.com
for product cleaning tips. Go to the Care + Maintenance selection.
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source:
CFL Maximum.
(1) Medium Base Decorative Filament 60W bulb (provided), Maximum 100W, Alternate bulb (1) 23W
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
Package Contents
Part
A
B
C
D
E
F
G
Description
Crossbar
Nipple
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
Edson Bulb
Quantity
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
B
C
D
E
F
G
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
1of5 Rev.A
UPTR8701WT
FINISH: WESTERN BRONZE
2.4mm
13Ga
GND
QUOIZEL
R
10" Dia.
4”
10"
1
(1) Medium Base
Decorative
Filament 60W bulb (provided),
Maximum 100W.
NO.
PART NUMBER
1 I1101EC
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4
"
REPLACEMENT PART DESCRIPTION
REPLACE PRODUCT 1910 INCANDESCENT BULB
2of5
QTY.
1
Rev.A
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-UPTR8701WT
For Style UPTR8701WT
STEP 1
-
Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet box screws (not supplied). Tighten until snug.
Figure 1
Outlet Box
Crossbar
STEP 2
-
Attach Nipple to Crossbar
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Mounting
Hole
Outlet Box Screw
(not Supplied)
Figure 2
Crossbar
Hex Nut
Lock Washer
Nipple
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
3of5 Rev.A
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-UPTR8701WT
For Style UPTR8701WT
STEP 3
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
Figure 3
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply
Black wire from fixture
Ground wire from fixture
Figure 4
STEP 4
-
Attach Fixture Body to Nipple
A. Place the Backplate of the Fixture Body (F) over the
Nipple (B) and secure with the Mounting Ball (E). Hand tighten until snug.
Figure 5
Backplate
Fixture
Body
Outlet Box
Nipple
Mounting
Ball
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
4of5 Rev.A
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-UPTR8701WT
For Style UPTR8701WT
STEP 5
-
Install Bulb
A. This fixture uses Medium Base Decorative Filament
60W bulb (G), Maximum 100W. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 6
Bulb
Socket
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
5of5 Rev.A
