Echo Audio Darla Owner`s manual

Darla
by
®
Owner’s Manual Version 2.2 for Mac
Darla is designed and manufactured in the U.S. by Echo Corporation
Sending in your registration card – or registering online at http://www.echoaudio.com/register.html allows us to register key information so that we may handle problems faster and inform you of advance
information on upgrades and other news. Thanks in advance for filling out your registration card and
sending it to us. We hope you enjoy your Echo product.
Limited Warranty
Echo Corporation warrants this product, when purchased at an Authorized Echo Dealer in the United States
of America, to be free of defects in materials and manufacturing workmanship for a period of one year
from the date of original purchase. During the warranty period Echo shall, at its option, either repair or
replace any product that proves to be defective upon inspection by Echo. Final determination of warranty
coverage lies solely with Echo. Echo reserves the right to update any unit returned for repair, and reserves
the right to change or improve the design of the product at any time without notice.
This is your sole warranty. Echo does not authorize any third party, including any dealer or sales
representative, to assume any liability on behalf of Echo or to make any warranty for Echo.
Service and repairs of Echo products are to be performed only at the factory (see below) unless otherwise
authorized in advance by the Echo Service Department. Unauthorized service, repair or modification will
void this warranty.
To obtain factory service:
Contact Echo Corporation at (805) 684-4593, 9AM to 5PM Monday through Friday (Pacific Time). If
necessary, you will be given a return authorization number. Products returned without an RA number will
be refused. Echo may, at its option, require proof of the original date of purchase in the form of a dated
copy of the original authorized dealer’s invoice or sales receipt.
Pack the product in its original shipping carton and attach a description of the problem along with your
name and a phone number where Echo can contact you if necessary. Ship the product insured and freight
prepaid to:
Echo Corporation
6460 Via Real
Carpinteria, CA 93013
DISCLAIMER AND LIMITATION OF WARRANTY
Echo Corporation makes no other warranties, express, implied, or otherwise, regarding Echo products, and
specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of
implied warranties is not permitted in some states and the exclusions specified herein may not apply to you.
This warranty provides you with specific legal rights. There may be other rights that you have which vary
from state to state.
In no event will Echo Corporation be liable for any lost profits, or for any consequential, direct or indirect
damages, however caused and on any theory of liability, arising from this warranty and sale.
©1999 by Echo Corporation
6460 Via Real
Carpinteria, CA 93013
Echo®® is a registered
trademark
of Echo Corporation
®
®
and
Darla
are
trademarks
of Echo Corporation®
Layla , Gina
‘98®, and
Windows NT are registered trademarks of Microsoft, Inc.
Windows®®, Windows ‘95®®, Windows
®
Macintosh , Power Mac , G3 and Power PC® are registered trademarks of Apple Computer, Inc.
2
Table of Contents
Introduction
What You Should Have Received in the Darla Box
System Requirements
4
4
4
Darla Installation
Checking your Macintosh
Install 3rd Party Multitrack Software
Configuring your Macintosh System
Installing the Darla Hardware
Running the Echo Card Installer
Darla Audio Input & Output Devices
Custom Install: Additional ASIO Drivers
ASIO Driver Configuration
5
5
6
6
11
13
15
16
17
The Echo Console
Console Controls
Monitor Controls
Setting Clock Sources and Destinations
18
19
19
21
Contacting Customer Service
21
Appendix A: Introduction to Digital Recording
Appendix B: Specifications
22
26
Index
27
3
Introduction
Thank you for choosing the Darla 20-bit Multitrack Digital Audio Recorder.
We think you’ll find Darla to be an extremely flexible, high-performance
tool for your computer-based hard disk recording system.
What You Should Have Received in the Darla Box
When you opened the Darla box, you should have found the following:
•
•
•
•
A Darla PCI card wrapped in an anti-static cover
A Darla audio breakout box
A compact disc containing the Macintosh Installer and demo
versions of digital audio recording, editing, and processing
software from a variety of manufacturers.
The Darla Owner’s Manual
System Requirements
In order to use Darla you’ll need the following:
• An Apple brand Macintosh computer with a 604 or higher processor
(G3 highly recommended). Our latest drivers now support the Apple
Macintosh 1999 G3’s (Yosemite). We will not be able to supply
technical support for any non-Apple brand Macintosh clone
computers.
• A fast, high-capacity IDE or SCSI hard disk drive
• An audio software program that uses ASIO: Cubase VST,
VisionDSP, etc.
• Peripheral audio equipment, such as a mixer, power amplifier, DAT
recorder, musical instruments, cables, etc.
4
Darla Installation
Complete Darla installation consists of performing a system check, installing
any multitrack recording software, configuring your Macintosh for
multitrack audio, installing the Darla PCI card, connecting the audio
breakout box to the card, running Install Echo Card and, if necessary,
installing additional ASIO drivers.
Checking your Macintosh
1. Do you have enough Memory? With your mouse select Apple – About
this computer. Look at the amount of Built-in Memory you have. You
will need to have at least 64Mb to use Darla in your computer. It is
highly recommended that you have more.
2. Is your Processor fast enough? Select Apple System Profiler from the
Apple menu. Look at the section entitled Hardware overview and see
what kind of processor you have. If it’s a PowerPC 604 or higher, then
you can use Darla.
3. Do you have an open PCI slot? Make sure that you have an open PCI
slot in your Mac. If you don’t know offhand, you will have to open up
the Mac and look. Make sure you shut down the Mac and unplug the
power cable before you open it. If you see an open PCI slot, then you’re
OK.
If your system checks out OK, it’s time to move on to the next phase of
installation.
Install 3rd Party Multitrack Software
If you haven’t already, we recommend that you install any 3rd party software
now. This is not essential, but it will help when installing the Extensions
and drivers for Darla later.
5
Configuring your Macintosh System
1. Check your Boot Disk. Most people only have one OS on their Mac, so
they can ignore this section. If you have multiple hard drives with
separate OS’s in your Mac, then you will have to install the Darla
software separately for each OS. To check your boot disk, go to Apple –
Control Panels – Startup Disk. Make sure that the drive you want to
boot from is highlighted. If you have changed this selection, you will
have to restart for it to take affect.
6
2. Turn Virtual Memory Off. Turn RAM Disk Off. Go to Apple –
Control Panels – Memory. Where it says Virtual Memory, click Off.
While you’re here, make sure that RAM Disk is also Off. These settings
are necessary for the Darla software to work properly.
3. Make Alias for Sound Control Panel. Now you are going to install a
helpful sound utility. Double click on your boot disk (if you have more
than one hard drive and don’t know which one this is, see #1 above).
Now open the Apple Extras folder, and then open the Sound Control
Panel folder. Here you will see a program called Sound. Highlight it by
clicking on it once. Now select File – Make Alias, and then do it a
second time. Now drag both of the aliases to your desktop. Go back to
the boot disk and open System Folder, and find the folder called
Control Panels. Drag one of the aliases into the Control Panels folder.
Now you can access the Sound Control panel from your desktop or
from the Apple – Control Panels menu.
7
4. Set Sound In and Sound Out to Built-in. Open the Sound Control
Panel. You can do this by double clicking the alias you just created and
put on your desktop. Select Sound In from the drop down menu.
Highlight Built-in by clicking on it. Now select Sound Out from the
drop down menu. Highlight Built-in by clicking on it. Both of these
settings may have already been set to Built-in, but it’s good to make sure.
5. Turn Off Folder/Menu Sounds. This is optional, but highly
recommended. If you leave these on, then some audio programs (like
Cubase VST) may not function as well as they could. Go to Apple –
Control Panels – Appearance. Click the Sound tab. In the Sound
Track menu select None. If you had a sound scheme selected before,
you would have heard sounds accompanying every mouse click and drag.
Now you should hear nothing.
8
6. Mute/Turn down Built-in Volume. This is also optional, but highly
recommended. If you leave the Built-in volume on, the alert sounds
could interfere with a live recording using an ASIO program. Open the
Sound Control Panel by double clicking the alias on your desktop (The
one you created in step 3). Select Volumes from the drop down menu.
Move the slider for Built-in to the bottom, and make sure there is a check
in the Mute box.
9
7. Create an Audio Extensions Set. You need a separate Extensions Set
with certain Extensions disabled so that your audio program can perform
at its best with the Darla system. First, select Apple – Control Panels –
Extensions Manager, and click the Duplicate Set… button. Type in a
name (like Audio Settings), and click OK. Now scroll down the list of
Extensions and disable all of them that have to do with networking,
printing, and any that say OpenTransport or OpenTpt. You disable an
Extension by clicking the corresponding On/Off checkbox so that it is
empty (meaning Off). Once you are done, click the Restart button and
your Mac will restart using your new Audio Extensions Set.
If you ever want to switch back to your previous Extensions Set, go to
the Extensions Manager, select it from the Selected Set drop down
menu, and click Restart. When your Mac restarts, you will now be able
to use any printers or networking functionality you had before you
started. When you want to use your Audio program again, just select the
Audio Extensions Set and restart.
10
Installing the Darla Hardware
Once you have checked your system requirements, verified that there are no
problems with your system, installed any 3rd party audio software, and have
configured your Macintosh for multitrack audio, it is time to install Darla
into your computer. Please refer to the section in your Mac manual for
installing a PCI card.
IMPORTANT - Unplug your computer and detach all peripherals before
proceeding with the following steps.
1. Remove your computer’s cover. This operation differs from computer to
computer. Refer to your computer’s manual for a further explanation of
this step if necessary.
2. Select the slot into which you will install the Darla card. You may use
any of the available PCI slots in your computer for Darla. Remove the
bracket covering the expansion slot where you would like to install Darla.
If there was a screw for the bracket, place it in a safe place as you will
need it later to complete installation.
3. Insure that you have fully discharged all static electricity from your
body before handling the Darla card. This can be done through the use
of a grounding strap or, more simply, by touching your bare hand to the
metal casing of the computer’s power supply. (For this latter method to
work, the computer must be plugged in, though not turned on. After
you’ve discharged your static, unplug the computer before proceeding to
the next step.)
4. Insert card into slot. Remove the Darla card from its protective antistatic bag. Handle the card carefully by its edges and insert it into the
selected expansion slot. Insure that the card’s edge connector (the
protruding edge with the gold leads) is seated firmly into the slot.
Centering the card over the slot and using a gentle rocking motion while
pushing downward into the slot generally works well. Be careful not to
force the card into the slot, or bend or twist it while it is being inserted, as
this could result in the card being damaged.
11
5. Secure card to computer. If there was one, use the screw removed
earlier from the protective backplate to attach the metal bracket at the
back of the Darla card to the computer’s rear panel. On many Macs the
locking mechanisms used to hold down the PCI cards cause difficulties
properly seating the cards. We recommend checking the card and
making sure it is well seated and liable to stay that way. If the card is
loose or being pushed around by the locking Mechanism, we recommend
loosening the hex screws that hold the back-plane of the card to the Mac,
that thin metal piece that sits against the case of your computer. Another
option, if that piece needs a little more play, gently bend it back. Some
users have broken the plastic that comes with their Mac to solve this
problem. However, due to Mac warranty issues, we are not able to
recommend this approach.
6. Replace the computer’s cover and secure it. Please refer to your Mac
manual for instructions. Reattach its power supply cord and reconnect any
peripherals that you may have removed prior to beginning the Darla
installation.
7. Locate the Darla audio breakout box. Align the box with the connector
on the Darla card that now protrudes through the back panel of your
computer, being certain that the breakout box is properly oriented (the two
red connectors toward the top of the card). Plug the box into the Darla
card, and secure the box using the built-in screws located on both sides of
the connector.
8. You can now attach external audio devices to the breakout box. Darla
can accommodate two analog input signals and can generate eight
independent analog output signals.
All of the analog inputs and outputs on Darla are simultaneously active,
allowing you to record up to two channels of audio while playing back eight
channels.
12
Running the Echo Card Installer
Now that you have completed the hardware installation, you need to run the
installer for Darla to interact properly with the MacOS and your audio
recording application.
What the installer does:
Deletes the EchoCard Extension if a previous version exists
Deletes the EchoConsole if a previous version exists
Copies the Darla Echo Card extension to the system folder
Creates the Echo Card Folder and puts the Echo Console in it
Copies the Darla ASIO Driver
Insert the Darla Mac Installation CD into your CD-ROM drive. Double
click the icon called Install Echo Card. Read the Release Notes that
appear so that you will be aware of any important updates. If you want to
read it later, you will find a Read Me file in the Echo Card Folder after
installation. After you’re done with the Release Notes, click Continue.
You will see a message saying ‘Preparing to install…’ and the installer
may take several minutes before it continues, so please be patient. After a
while you will see a new box that says Easy Install. You will want to keep
this setting and press the Install button.
13
Now select where you want the Echo Card Folder to be installed. The
default is to your desktop. You will get a message about restarting after
installation – Press Yes to continue.
Now you will see the installer working, and then you will be asked which
ASIO folder you want to install the Darla ASIO Driver to. If you have
more than one audio program that uses ASIO, then you will have to select
one folder, and then come back later to install the ASIO driver to your other
program(s). You will find instructions on how to do this in a following
section. Once you have selected a folder, press the Select button.
14
You should now see a message saying ‘Installation was successful.’ Press
Restart. It may be a good idea to turn down your mixer at this point, as
there can be some noise when restarting.
During restart, the red Echo Extensions Icon should appear on the lower left
corner with your other extensions. If you don’t see the red icon, check to see
if there is a space for that icon. Some video cards for the Mac have a
problem where they repaint the screen, hiding our little icon from sight.
However, the space will still be there for the icon. This does not affect the
performance of the Darla system. There should be one icon for each Echo
Card in your computer. If this is not the case, then the card probably isn’t
being recognized by your Mac. Shut down your Mac, and make sure the
card is seated properly in the PCI slot. Go back to the hardware installation
section for instructions on how to do this.
After the system has booted, go into Sound Control Panel and make sure
that the card is there. You can do this by double clicking the handy alias you
created earlier. Look in Sound In and Sound Out. If you don’t see it here,
you may not have installed the card properly.
Darla Audio Input & Output Devices
Now do a quick sound check. First, go to the Echo Card Folder you
installed earlier. Open it and double click the Echo Console icon.
***WARNING - IMPORTANT***
This will set the Darla hardware to unity gain. You will need to do this after
every restart or else the Darla volume levels will be extremely loud. Don’t
hurt your ears!! Now go into Sound Control Panel – Sound Out and
select Darla. Now select Alert Sounds. Make sure the volume levels aren’t
too high, and click a sound. If you have the Darla hardware set up properly
to a set of speakers, then you should hear the sound. If you don’t, then
double check your cables and try again. If you hear a sound then you have
succeeded in installing Darla!! Give yourself a pat on the back.
Important - remember to switch Sound Out back to Built-In!!!
15
Custom Install: Additional ASIO Drivers
If you have several audio programs that use ASIO, then you will need to
install the Darla ASIO Driver to the corresponding ASIO folder for each
program. You should have already installed the Darla ASIO Driver to one
of these programs as part of the installation process above. Open the Darla
Mac Install CD and start the Install Echo Card program just like you did
earlier. Follow the instructions from before until you get to the part with the
Easy Install. Remember, you may have to wait a while. Click on the box
that reads Easy Install, and select Custom Install.
Now you should see several installation options. Depending on what you
want to install, click the appropriate checkbox or boxes. If you just want to
install the ASIO Drivers, then just click that checkbox and leave the other
ones empty. Press Install. You will now see the Select ASIO folder
window. You can only select one folder at a time, so if you have more than
two audio programs that use ASIO you will have to come back and do this
again. After you have chosen a folder, press Select. If you want to install
some more Darla drivers click Continue. If you are done, click Quit. Just
one more step and you’ll be making music with ASIO.
16
ASIO Driver Configuration
You have now finished installing the Darla ASIO Driver to all of your
audio programs that use ASIO. You now need to select the Darla ASIO
Driver from within your audio program. Please refer to your audio program
manual for instructions on how to do this.
This completes the installation of the Darla hardware and software.
17
The Echo Console
Included with your Darla is a “virtual control surface” application called The
Echo Console. The Console allows you to control the audio I/O functions of
Darla, and it brings these controls to a single easy-to-use location. From the
console you can control the input monitoring levels.
The Echo Console software can be found in the Echo Card Folder that was
created during installation. Double clicking on the Echo Console icon will
activate the console program. It should look like this:
The console functions are grouped into three areas: clock selection (at the
very top), input levels and trims (occupying the top half), and monitor
channels (at the very bottom).
18
Console Controls
Let’s take a look at the control surface. The Input Levels are located in the
upper portion of the console surface.
Directly below the Input Levels is a section called Input Trims.
Unfortunately Darla does not support this function. This is only available in
the Gina and Layla audio recording systems.
Monitor Controls
Below the Input Levels and Input Trims are the Monitor Channel
controls. The input monitor controls allow you to monitor the record input
signal via any of the available outputs on your Gina. Each input channel has
a corresponding monitor output channel directly below it on the console.
For each level meter there is a knob below it for input monitoring. Below
every knob is a display that shows the currently selected monitor level. You
can change the monitor level by clicking in the display and typing, by
clicking the arrows, or by click holding the knob and dragging right or left.
You can also zero the level by holding the Command button on your
keyboard and clicking the knob. Note that there is a Mute button for each
channel for easy muting of the monitors. There is also a group of numbered
19
buttons on the bottom left. These buttons allow you to select an output
channel.
When button 1 is selected, all of the monitor controls affect what goes to
output 1. Note that it says Out 1 at the bottom of every channel. This will
change according to whatever button is selected. The console will
remember the changes you have made to each output even though you can
only see one at a time. Take note that these controls are for the routing of
audio signals from the Darla inputs to the Darla outputs only. The console
does not control output that is generated by your computer (such as aiff
files). That is controlled by whatever audio program(s) you may have.
Remember that all of the inputs are continuously monitored by all of the
outputs at some level. The degree of attenuation (or muting) of that level is
set by the monitor controls. The console program constantly maintains a
level setting for each of the 16 monitor paths it controls. Clicking on an
output selection button simply selects the settings that are displayed.
20
Setting Clock Sources and Destinations
At the very top of the Console there are buttons that allow you to select the
synchronization clocks that are used by Gina and Layla. The console
program will sense which input clocking options are available, and
automatically disable those that are unavailable. There are no clocking
options available for Darla.
Contacting Customer Service
If you experience any trouble with your Darla system please go to the
support area of our website at www.echoaudio.com and check out the
troubleshooting FAQ’s we have there. If you can’t find a solution to your
problem there, please fill out the provided technical support email form.
This form will be sent to our technical support staff and they will respond to
you quickly. Please fill out the form completely. We will not respond to
you unless you fill out the form in its entirety. We cannot help you unless
you give us the required information.
We do ask you to please read through this manual and the support area of
our website before contacting us.
Thank you for buying Darla!
21
Appendix A: An Introduction to
Digital Recording
Converting Sound into Numbers
In a digital recording system, sound is represented as a series of numbers,
with each number representing the voltage, or amplitude, of a sound wave at
a particular moment in time. The numbers are generated by an analog-todigital converter, or ADC, which converts the signal from an analog audio
source (such as a guitar or a microphone) connected to its input into
numbers. The ADC reads the input signal several thousand times a second,
and outputs a number based on the input that is read. This number is called a
sample. The number of samples taken per second is called the sample rate.
On playback, the process happens in reverse: The series of numbers is
played back through a digital-to-analog converter, or DAC, which converts
the numbers back into an analog signal. This signal can then be sent to an
amplifier and speakers for listening.
In computers, binary numbers are used to store the values that make up the
samples. Only two characters, 1 and 0, are used. The value of a character
depends on its place in the number, just as in the familiar decimal system.
Here are a few binary/decimal equivalents:
BINARY
0000000000000000
0000000000000001
0000000000000010
0000000000000100
0000000000001000
1111111111111111
DECIMAL
0
1
2
4
8
65,535
Figure A. Binary numbers and their decimal equivalents
Each digit in the number is called a bit, so the numbers in Figure A are
sixteen bits long, and the maximum value which can be represented is
65,535.
22
Sample Size
The more bits that are used to store the sampled value, the more closely it
will represent the source signal. In an 8-bit system, there are 256 possible
combinations of zeroes and ones, so 256 different analog voltages can be
represented. A 16-bit system provides 65,535 possible combinations. A 16bit signal is capable of providing far greater accuracy than an 8-bit signal.
Figure B shows how this works.
Figure B. The more bits there are available, the more accurate
the representation of the signal and the greater the dynamic
range.
Darla’s analog inputs use 20-bit ADCs, which means that the incoming
signal can be represented by any of 1,048,576 possible values. The output
DACs are also 20-bit; again, 1,048,576 values are possible. Darla processes
signals internally with 24-bit resolution to insure that there is no degradation
to the audio signal as it is processed through the system.
The number of bits available also determines the potential dynamic range.
Moving a binary number one space to the left multiplies the value by two
(just as moving a decimal number one space to the left multiplies the value
by ten), so each additional bit doubles the maximum value that may be
represented. Each available bit provides 6dB of dynamic range. For
example, a 20-bit system can theoretically provide 120dB of dynamic range.
23
Sample Rate
The rate at which the ADC generates the numbers is equally important in
determining the quality of a digital recording. To get a high level of
accuracy when sampling, the sample rate must be greater than twice the
frequency being sampled. The mathematical statement of this is called the
Nyquist Theorem. When dealing with full-bandwidth sound (20Hz−20kHz),
you should sample at greater than 40,000 times per second (twice 20kHz).
Darla allows you to sample at rates up to 48,000 times per second.
If the sampling rate is lower than the frequency you are trying to record,
entire cycles of the waveform will be missed, and the result will not
resemble the proper waveform. When the sample rate is too low, the
resulting sound has diminished high frequency content.
Figure C. Increased sample rates yield a more accurate
reproduction of the source signal.
By the way, the circuits that generate the sample rate must be exceedingly
accurate. Any difference between the sample rate used for recording and the
rate used at playback will change the pitch of the recording, just as with an
analog tape playing at the wrong speed. Also, any unsteadiness, or jitter, in
the sample clock will distort the signal as it is being converted from or to
analog form.
24
Storing Digital Data
Once the waveform has been transformed into digital bits, it must be stored.
When sampling in stereo at 48kHz using a 20-bit word size, the system has
to accommodate 1,920,000 bits per second. Though this is a lot of data, it is
well within the capabilities of personal computers.
Most computer-based digital recording systems record the data directly to
the computer’s hard disk. Today’s hard disks are capable of storing large
amounts of data, though the performance of hard drives can vary
substantially. The speed and size of your hard drive will be a major
determining factor in how many tracks of audio you will be able to
simultaneously record and playback.
25
Appendix B: Specifications
Audio Performance
Analog in to analog out
!"Frequency Response: 10Hz – 22kHz, ±0.5dB
!"Dynamic Range: 98dB
!"THD+n: <0.005%, 20Hz–22kHz, A-weighted
Hardware
!"Two RCA analog inputs with precision 20-bit 128x oversampling analogto-digital converters
!"Eight RCA analog outputs with high-performance 20-bit 128x
oversampling digital-to-analog converters
!"On-board 24-bit Motorola 56301 DSP (66 MIPS)
!"24-bit data resolution maintained throughout internal signal path
!"Support for 11025Hz, 22050Hz, 32000Hz, 44100Hz and 48000Hz
sample rates
26
Index
A
H
analog resolution · 23
analog-to-digital converter · 22
ASIO · 14, 17
ASIO install · 16
hardware installation · 11
I
input controls · 19
input devices · 15
introduction · 4
B
boot disk · 6
M
C
memory · 5
memory, virtual · 7
monitor controls · 19
checking your Macintosh · 5
configuring your Macintosh · 6
console · 15, 18
console controls · 19
contents, of box · 4
customer service · 21
O
output devices · 15
D
P
Darla installation · 5
digital-to-analog converter · 22
PCI card, installation · 11
PCI slot · 5
E
S
Echo Console · 18
Echo Console controls · 19
extensions · 10, 13, 15
sample rate · 22, 24
sample size · 23
selecting a slot · 11
software installation · 13
sound control panel · 7, 8, 9, 15
static electricity, discharging · 11
synchronizing multiple devices · 21
system requirements · 4
G
G3 · 4
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement