BoLiving 519793 Assembly Instructions Manual

Java TV Unit
519793
Rev 1 - 2020-07-03
Keep these instructions for future reference
WARNING
!
!
!
!
!
Read instructions carefully. Check no parts are missing.
Assemble the furniture on a soft level surface to avoid damaging the furniture or your floor.
Carefully identify each component, especially those that are similar.
The most common mistake is getting things back to front.
Separate and identify each component from the hardware pack and rest each one in it's
proper location before fastening.
! We recommend furniture be assembled near where they will be placed, to avoid moving the
product unnecessarily once assembled.
! If there is a need to move the furniture, please remove all loose items and have extra hands
to help lift the furniture to the desired location. Dragging the furniture will damage both the
furniture and the floor.
! Regularly check and re-tighten (if necessary) all bolts on furniture that you have assembled
yourself.
Rattan
Rattan is a natural material that will expand and contract with changes in the surrounding humidity
and temperature. Each rattan piece in the furniture may also respond to these changes to a different
degree. Once humidity and temperature return to normal, each rattan piece would also return to its
original shape. This is a natural phenomenon and not a defect.
2 Persons Required
ALLOW 60 MIN
Tools Required
DO NOT USE ON PRODUCT
Unit 1, Ubique Business Park, March Way, Battlefield, Shrewsbury, SY1 3JE
Page 2
Top Panel (P1)
Side
Panel
(P3)
Back Panel (P5)
Side
Panel
(P3)
Divider
Panel
(P4)
Bottom Panel (P2)
Leg (P10)
Leg (P10)
Big Middle
Leg (P8)
Small Middle
Leg (P9)
Leg (P10)
Leg (P10)
Door (P7)
Door (P6)
Parts list
1 x Top Panel (P1)
1 x Bottom Panel (P2)
2 x Side Panels (P3)
1 x Divider Panel (P4)
1 x Back Panel (P5)
1 x Door (P6)
1 x Door (P7)
1 x Big Middle Leg (P8)
1 x Small Middle Leg (P9)
4 x Legs (P10)
Page 3
Hardware Pack
15 x Cam Bolts
(H1)
15 x Cam
Nuts (H2)
22 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
4 x Screws
28mm (H11)
1 x Allen Key
(H12)
14 x Dowels
30mm (H3)
8 x Bolts
55mm (H8)
1 x Screw
38mm (H13)
2 x Handles
(H4)
8 x Flat Washers
(H9)
1 x Adjustable
Foot (H14)
4 x Felt Feet
(H5)
8 x Spring
Washers (H10)
4 x Rollers
(H15)
4 x Guides
(H16)
Page 4
Step 1
(P10)
You will need
4
X
4 x Felt Feet
(H5)
H5
Attach 1 x felt foot (H5) onto each leg (P10) as shown.
Step 2
(P10)
You w ill need
(P2)
8 x Bolts
55mm (H8)
8 x Flat
Washers (H9)
H8
(P10)
H12
8 x Spring
1 x Allen Key
Washers (H10)
(H12)
3 x Cam Bolts
(H1)
H9
H10
(P10)
H8
Phillips Head
Screwdriver
H1 H1
(P10)
(P2)
H8
(P10)
Attach each leg (P10) onto bottom panel (P2), using 2 x bolts (H8), 2 x flat washers (H9)
and 2 x spring washers (H10). Tighten the bolts with allen key (H12).
Screw 3 x cam bolts (H1) into bottom panel (P2), using a phillips head screwdriver.
Page 5
Step 3
You will need
1 x Screw
38mm (H13)
H3
(P8)
Phillips Head
Screwdriver
H13
(P9)
H14
2 x Dowels
30mm (H3)
(P9)
(P8)
H3
Mallet
Screw 1 x adjustable foot (H14) to big middle leg (P8).
Insert 2 x dowels (H3) into middle legs (P8) & (P9).
Use a mallet to gently tap the dowels into place if needed.
Attach small middle leg (P9) to big middle leg (P8)
with 1 x screw (H13), using a phillips head screwdriver.
1 x Adjustable
Foot (H14)
Step 4
You w ill need
3 x Cam
Nuts (H2)
Flat Head
Screwdriver
(P9)
(P2)
H2
(P8)
H2
Position middle legs (P8) & (P9) onto bottom panel (P2).
Insert 3 x cam nuts (H2) into middle legs (P8) & (P9).
Rotate the cam nuts so the arrows pointing towards
the incoming cam bolts and turn clockwise to lock with
a flat head screwdriver.
Turn the assembled unit over.
Page 6
H1
Step 5
H1
H1
You w ill need
H1
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P2)
H1
H1
Screw 6 x cam bolts (H1)
into bottom panel (P2),
using a phillips head screwdriver.
H1
Step 6
H1
H1
You w ill need
H1
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P1)
H1
H1
Screw 6 x cam bolts (H1) into top panel (P1),
using a phillips head screwdriver.
Step 7
H3
H3
You w ill need
(P3)
12 x Dowels
30mm (H3)
Mallet
2
X
H3
H3
H3
H3
Insert 4 x dowels (H3) into
divider panel (P4) as shown.
H3
Insert 4 x dowels (H3)
into each side panel (P3) as shown.
Use a mallet to gently tap the dowels into place if needed.
(P4)
H3
Page 7
Step 8
(P3)
You w ill need
H2
H2
6 x Cam
Nuts (H2)
Flat Head
Screwdriver
(P4)
(P2)
H2
H2
Laminated
edge
(P3)
H2
Position panels (P3) & (P4) onto bottom panel (P2) as shown.
Insert 6 x cam nuts (H2) into panels (P3) & (P4),
turn clockwise to lock using a flat head screwdriver.
Step 9
(P5)
(P3)
(P4)
(P2)
(P3)
Slide back panel (P5) into the grooves in panels (P2) and (P3).
Page 8
Step 10
(P1)
You w ill need
H2
H2
H2
H2
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
H2
(P5)
H2
(P3)
(P3)
(P4)
Position top panel (P1) onto panels (P3), (P4) & (P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panel (P3).
Insert 6 x cam nuts (H2) into panels (P3) and (P4), using a flat head screwdriver
turn clockwise to lock.
(P1)
Step 11
XX
YY
You w ill need
XX=YY
6 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
(P1)
H7
XX
Phillips Head
Screwdriver
H7
YY
H7
H7
H7
H7
(P1)
H7
(P5)
(P1)
(P5)
H6
H7
(P5)
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
Page 9
Step 12
H6
H6
H16
You will need
4 x Guides
(H16)
(P6)
4 x Rollers
(H15)
H6
16 x Screws
16mm (H6)
H16
Phillips Head
Screwdriver
H6
H15
(P6)
H6
H16
H6
H6
H15
H16
H6
H15
(P7)
H6
H16
H6
H6
H15
H15
(P7)
Attach 2 x guides (H16) to each door (P6) and (P7) with 4 x screws (H6),
using a phillips head screwdriver as shown.
Attach 2 x rollers (H15) to each door (P6) and (P7) with 4 x screws (H6),
using a phillips head screwdriver as shown.
Page 10
Step 13
(P7)
(P1)
H16
(P7)
H16
(P2)
(P7)
(P7)
H15
(P2)
(P1)
(P7)
H16
(P7)
H15
(P2)
(P6)
If necessary, push the button shown to retract the tabs on guides (H16) on door (P7).
Position door (P7) so that its rollers fit into the inner track on panel (P2).
Tilt door (P7) into position. Push the button on guides (H16) again
to extend the tabs into the guide tracks on panel (P1).
Repeat with door (P6) on the outer track.
Page 11
Step 14
You w ill need
4 x Screws
28mm (H11)
Phillips Head
Screwdriver
2 x Handles
(H4)
H4
(P7)
H11
H4
(P7)
H11
(P6)
H11
H4
Attach 1 x handle (H4) onto each door (P6) & (P7) with 2 x screws (H11),
using a phillips head screwdriver as shown.
Step 15
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
Page 12