- No category
advertisement
Limit Settings
The screen is fitted with 2 limits. The limits automatically stop the screen in the fully Up
(top limit) and fully Down (bottom limit) positions. You can adjust the bottom limit to set your viewing height.
Setting The Bottom Limit
Caution: Setting the bottom limit beyond the black leader may render your screen inoperable and void your warranty
The bottom limit switch is accessible through a grommeted hole on the left side of the casing.
Lower the screen to the operating position then insert the supplied Hex key into the white coloured screw. Turn it clockwise to raise the screen or turn it anti-clockwise to lower the screen.
When lowering the bottom limit the screen will move as you adjust it.
When raising the bottom limit please lift and lower the screen with the remote or side buttons to see the new limit setting.
Protecting Your Screen:
• Keep away from direct sunlight or
high temperatures.
• Examine both the front and back
surfaces before retracting into the
case to make sure it is free of dust,
dirt, insects or other foreign matter.
• Use a soft brush or cloth to lightly
remove any foreign particles.
Cleaning Your Screen:
• Do not use any solvents, chemicals
or abrasive cleaners on the
screen surface.
• Use a mild detergent with warm water
to remove any marks on the surface or
screen case.
• Always immediately dab the screen
with a soft cloth to avoid soap marks.
• Do not scrub the surface.
Warranty: 12 Months
Imported and Distributed in Australia by
Herma Technologies
Factory 4A, 6 Albert St
Preston, VIC 3072
For more information please go to www.grandviewscreens.com.au or call 1300 730 025
Nov 2008 v1
Grandview Sky-Show
User’s Manual
To the Owner:
Congratulations on purchasing a Grandview Sky-Show, designed to produce the sharpest, most pleasing pictures with maximum convenience.
Important Notes:
• Please read this instruction manual before use.
• Please do not attempt to adjust or repair
the product. You will void the warranty.
• Please retain this instruction manual for
future reference.
• Handle the screen carefully during transportation.
• To ensure long lasting viewing enjoyment, always
keep the screen rolled up when not in use.
Operational Instructions
Step 1
Carefully unpack the screen.
Fix the cable box provided.
Step 2
Mount the screen as shown below.
Cable
Supplied
Step 3
Insert the plug.
Power Cable Box
Allen Key Cable Lock RF Remote
Step 4
Plug the power cord into the Cable Box.
Ceiling
Cable
(Drop 5m)
Plug
Plug Socket
Step 5
Using RF Remote
Your remote control comes with batteries installed.
To operate your remote:
Press to lift the screen
Press to stop the screen
Press to lower the screen
The Micro switch is used for retracting or lowering cable.
UP for screen fabric
STOP for both
Down for screen fabric
Down for cable
Up for cable
Cable Limit Settings
(The limits are preset at min 300mm and max 4950mm)
• Turn the remote control over, locate the
program setting button.
Press with a fine tip, the LED will light up
indicating the programming mode.
• Press the micro switch UP/DOWN. When
button the new cable position is reached,
press the STOP button.
• Press the programming button again.
Now the limit is set.
Down for cable
Up for cable
Please secure your safety limit lug at least
10mm above the new limit
Cable
Secure positioning piece
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project