User Manual Priva
材质:封面封底128G双铜 + 单色印刷
内页臻品上质80g高白纸 2个小号骑马钉
大约12页, 尺寸W 105 x H 75mm
Simply Convenient
1. Features
2. Overview
Avantree Priva is a Bluetooth audio transmitter incorporating the latest “aptX Low
Latency” technology, for high quality audio streaming with virtually no delay.
With multipoint receiver support, Priva allows you to share the fun and enjoyment of
music with others.
①. LED indicator
②. Multi-function button (MFB)
③. Micro USB charging socket
④. 3.5 mm audio jack (Power on/off control)
⑤. Battery/DC switch
3.5 mm audio jack
⑥. Magnetic base
(On/Off control)
User Manual
aptX Low Latency Multipoint Bluetooth Transmitter
4. Getting Started
Priva supports true stereo headsets rather than mono A2DP headsets.
4.1 Power On/Off
Note: Once turned on, Priva will automatically go into pairing mode if it has
not detected any connection.
Wait for 5~15 secs,
both LEDs blink blue
Connect to TV’s audio
output port
Step-1: Enter Priva into pairing mode by plugging 3.5 mm audio cable
Step-2: Put your headphones/speaker into pairing mode.
Step-3: Keep them within 1 meter of each other, and wait until they have
Step-4: Connect Priva to the audio output port of the sound source, such as your
TV, laptop, etc. for wireless audio streaming.
Reconnection: Make sure your headset is on. Re-plug 3.5 mm audio cable, wait
for 2–15 secs.
5. How to Charge
LED blinks
blue and red.
Then double click
MFB, blue and red
LEDs on 1 s.
Micro USB cable
Battery DC
Step 1: Get Priva into pairing mode by re-plugging 3.5 mm audio cable(Make sure
your headset is off).
Step 2: Double click the MFB button. Priva’s BLUE and RED LEDs are both on for
1 s.
Step-3: Restart Priva.
Battery DC
User Manual
USB cable
Note: The USB outputs of some TVs or laptops are unstable.
When used in DC mode, we suggest you connect to a wall charger instead
of a USB port.
Connect 2nd headphone
Connect 1 st
headphone as above
4.4 Place the Priva
• Stick magnetic base to below optimal places
• Avoid hanging behind TV
Connect to TV’s audio
output port
Step-1:Connect to your 1st device as above.
Step-2: Press and hold the MFB for 7 seconds. Priva will enter pairing mode again.
Step-3: Enter the 2nd device into pairing mode and wait until they connect.
Note: When connected to two devices, Priva will be operate in SBC mode only.
7. LED indications
You may need to reset Priva if it is not working as expected. When Priva is reset
to factory default settings, all the paired mobile phone information will be erased.
3.5 mm Jack
6. Restore Factory Default Settings
When the LED blinks red, you should recharge the device. It normally takes about 3
hours to fully charge the battery. Switch to BATTERY MODE before charging. The
LED will stay red when charging and will turn off when charging is complete.
Charging requirement:
You can connect Priva via the supplied Micro USB cable to your own USB
chargers(wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC
USB port. It’s ok to use most mobile phone chargers on the market.
aptX Low Latency Multipoint Bluetooth Transmitter
Red LED on when charging,
Off when completed.
Simply Convenient
Press & hold for 7 secs
into pairing mode again,
wait till connected
Plug, wait until Get headset
LED blinks
into pairing
blue & red
Slide button to 'DC' mode
Battery DC
Connect 1st headphone
Slide button to 'Battery' mode
Magnetic base
4.3 Multipoint - Connect to two headphones (Optional)
Power Off: Unplug 3.5 mm audio jack
Micro USB
charging socket
1. Battery mode – Switch to battery mode for use as a portable device.
2. DC mode – Switch to DC mode and connect to a DC power source for using with
continuous power.
3.5 mm Jack
What’s in the box:
A. Avantree Priva
B. Magnetic base
C. 3.5 mm audio cable
D. RCA audio cable
E. Micro USB charging cable
F. User manual
G. Quick start guide
H. Warranty card
4.2 Pairing and connecting
Power ON: Plug 3.5 mm audio jack
Prive can be used in two different ways –
button (MFB)
Scan for Video Guide on YouTube
3. How to use battery mode or DC mode
LED indicator
8. Product Specifications
LED indicator
Power on
Blue LED on for 1 sec
Power off
Red LED on for 1 sec
Pairing mode
Pairing success
LEDs blink blue and red alternately
Blue LED on for 3 secs
Connected with SBC codec
Blue LED flashes once every 5 secs
Connected with aptX codec
Blue LED flashes 2 times every 5 secs
Connected with aptX-LL codec
Blue LED flashes 3 times every 5 secs
Connected with FastStream codec
Blue LED flashes 4 times every 5 secs
Restored factory default settings
Blue LED flashes once every 10 secs
Both blue & red LEDs on for 1 sec
Low battery
Red LED flashes twice every sec
- 10 -
• Bluetooth 3.0
• Bluetooth profile: A2DP
• Audio codec: aptX-LL, aptX, SBC, FastStream
• Operating Range: Class 2, 10 metres
• Supports pairing of 2 devices at once
• Play time: up to 8 hours
• Standby time: up to 120 hours
• Battery: 250mAH rechargeable Li-Po battery
• Weight: Body part approx. 23 g; Base approx. 7 g
• Size: 48 mm(L) x 48 mm(W) x 15 mm(H)
Working and standby times may
vary when used with different
Bluetooth devices, usage settings,
usage styles and environments.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF