Belkin F1DN116C User manual

Belkin F1DN116C User manual
Advanced Secure 8-Port
and 16-Port DVI-I KVM
User Manual
F1DN108C--Advanced Secure 8-Port DVI-I KVM
F1DN108F--Advanced Secure 8-Port Dual-Head DVI-I KVM
F1DN116C--Advanced Secure 16-Port DVI-I KVM
8820-01333 Rev. B01
Table of Contents
Table of Contents
sections
1
2
3
4
5
6
7
8
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operating the KVM Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Color Code Chip Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Secure 8-Port and 16-Port DVI-I KVM
Common Access Card (CAC) Configuration and Operation . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12
12
12
14
i
Introduction
9
Table of Contents
sections
1
2
3
4
5
6
7
8
Package Contents
Thank you for purchasing this Belkin Advanced Secure DVI-I KVM
Switch. This rack-mountable Switch is designed for use in secure
environment installations. The Switch offers safe centralized control,
which prevents unintended data transfer between computers running
at different security levels. The Switch provides the highest security
safeguards and features that meet today’s Information Assurance (IA)
computing requirements.
• Belkin Advanced Secure DVI-I KVM Switch
• 6 Ft. IEC/AC Power Cord
• Interchangeable Port Color Chips
This User Manual provides all the details you’ll need to install and
operate your new Switch, in addition to expert troubleshooting
advice—in the unlikely event of a problem.
• Port-Naming Labels
• 6 Ft. USB Cable
• Rack-Mount Brackets
• User Manual
Important Security Note:
If you are aware of potential security vulnerability while
installing or operating this product, we encourage you to
contact us immediately at the following email address:
[email protected]
Advanced Secure 8-Port and 16-Port DVI-I KVM
Important: This Switch is equipped with active anti-tamper
triggers. Any attempt to open the enclosure will activate the
anti-tamper triggers and render the unit inoperable. If the
unit’s enclosure appears disrupted or if all the port LEDs flash
continuously, please call Belkin Technical Support at
(800) 282-2355.
1
Introduction
9
Table of Contents
sections
1
2
3
4
5
6
7
8
Safety Precautions
•T
he product should be stored and used only in temperature and
humidity controlled environments as defined in the product’s
environmental specifications.
Please read the following safety precautions carefully before using
the product:
• Before cleaning, disconnect the product from the AC power source.
•P
roduct contains internal battery. Battery is non-replaceable. Never
attempt to replace battery as any attempt to open product enclosure
would permanently damage the product.
• Be sure not to expose the product to excessive humidity.
•D
o not store or use for extensive period of time in extreme thermal
conditions—it may shorten product lifetime.
• Be sure to install the product on a clean secure surface.
• Do not place the DCU cable in a path of foot traffic.
• If the product is not used for a long period of time, remove the
KVM’s wall-mount power supply from the mains jack.
• If one of the following situations occurs, get the product checked by
a qualified service technician:
o Liquid penetrates the product’s case.
o The product is exposed to excessive moisture or water.
oT
he product is not working well even after carefully following the
instructions in this user’s manual.
o The product has been dropped or is physically damaged.
oT
he product has obvious signs of breakage or loose
internal parts.
oA
C power plug or cable overheated, or is broken or damaged.
Advanced Secure 8-Port and 16-Port DVI-I KVM
2
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Security Features
Unidirectional Data Paths
The Belkin Advanced Secure KVM Switch is the most advanced and
secure commercially available KVM Switch available today. Below is a
summary of all the security features incorporated into the Switch.
Optical diodes used in USB data paths provide high isolation and
prevent data leakage.
Dedicated Processors
Steel Metal Enclosure
The Switch features a dedicated processor per computer port. This
keeps each computer running on different security levels physically
separated and secure at all times, and prevents any unintended data
leakage between computers.
The solid steel-metal enclosure reduces the entry points into the
Switch’s electronics and minimizes radiated signals that can be
snooped or intercepted.
No Memory Buffer
Active Anti-Tamper Triggers
The Switch does not have a memory buffer and does not have the
ability to store data. This prevents any keystrokes or other data
input from being unintentionally transferred as you switch between
computers, ensuring the integrity of your data.
Active chassis anti-tamper triggers prevent KVM electronics from
being accessed and tampered with.
Tamper-Evident Tape
A holographic security tamper-evident label is placed on the
enclosure to provide a visual indication if the Switch has been opened
or compromised.
Non-Reprogrammable Firmware
The Switch features custom firmware that is not reprogrammable,
preventing the ability to tamper with the KVM logic.
Advanced Secure 8-Port and 16-Port DVI-I KVM
3
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Tamper-Proof Hardware
Secure Packaging
All integrated circuits are soldered directly to the printed circuit board
to prevent tampering with the components.
“Tear away” packaging ensures secure delivery of the Switch as it is
routed to the end user. The recyclable packaging also breaks down
flat, simplifying the cleanup process.
Protected Display Information
NIAP Listing
Protected DDC/EDID emulation prevents software weaknesses that
can cause data leakage while maintaining compatibility with the
console display.
The Switch is listed by the National Information Assurance Partnership
(NIAP). It is NIAP Common Criteria validated to EAL 2+ (Evaluation
Assurance Level 2), Protection Profile v.2.1.
USB Device Detection
Storage and other unsafe USB devices are rejected when connected
to the Switch. Only mouse, keyboard, and CAC reader data are
passed through.
Advanced Secure 8-Port and 16-Port DVI-I KVM
4
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Other Features
Port Coloring
The Belkin Advanced Secure KVM Switch was designed with the
user in mind for today’s IT environment. Below is a summary of some
features incorporated into the Switch.
The included color chips can be inserted into each port-selector
button. Colors can be associated with an established network to
facilitate port identification and reduce user switching error.
USB Support
Port Naming
The Switch is compatible with USB technology and supports
plug-and-play connectivity with USB computers, keyboards, mice,
and CAC readers.
The included network-name labels can be placed in the area
underneath the port-selector button to facilitate port identification and
reduce user switching error.
DVI-I Support
LED Indicators
The Switch supports both digital and analog video signals. Analog
signals are passed through, to support legacy VGA hardware, and
digital allows for technologies available today, as well as into the future.
Each port button number illuminates to indicate that the console
currently controls the corresponding computer. As a port selector is
pushed, the LED number will light up.
Dual-Link DVI Support
Rack-Mount Brackets
The Switch supports video resolutions of up to 2560x1600. This
includes support for digital displays 24 inches and larger.
Audio Switching
This product includes rack-mount brackets for rack-mounting
installations.
Allows you to share speakers between computers.
USB Connectors
High-retention USB connectors keep the USB connections secure and
tight, preventing accidental disconnections.
Advanced Secure 8-Port and 16-Port DVI-I KVM
5
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Equipment Requirements
Cables
Belkin highly recommends you use Belkin DVI/USB KVM Cable Kits
for your Switch to help ensure superior performance. These cables
offer the highest quality possible to ensure optimal data and video
transmission. One Cable Kit is required per connected computer.
Belkin DVI-D/USB KVM Cable Kits with audio:
F1D9012b06 – 6 ft. (1.8m)
F1D9012b10 – 10 ft. (3m)
F1D9012b15 – 15 ft. (4.6m)
Belkin Smart Cables
F1D9008b06 (DVI to VGA Smart Cable, 6')
F1D9009b06 (VGA to DVI Smart Cable, 6')
F1D9011b06 (USB to DVI-I Smart Cable, 6')
Remove color chip
F1D9017b06
(DP paperclip
to DVI Smart Cable, 6')
with a standard
Belkin DVI-A to HD15/USB KVM Cable Kits with audio
(support analog video only):
F1D9015b06 – 6 ft. (1.8m)
F1D9015b10 – 10 ft. (3m)
Insert color chip
Belkin CAC USB A/B Cables
Belkin DP to DVI Cables
F1D9013b06 – 6 ft. (1.8m)
F2CD002b06-E (DP to DVI)
F1D9013b10 – 10 ft. (3m)
F1D9013b15 – 15 ft. (4.6m)
Advanced Secure 8-Port and 16-Port DVI-I KVM
Note: Due to USB and DVI signal limitations, the cable length cannot
exceed 15 feet (4.6m).
6
CAC
Audio
Mouse Keyboard
Console
Display
PS
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
System Requirements
Operating-System (OS) Platforms
Keyboards
The Switch is compatible with computers running on, but not limited
to, the following OS platforms:
•U
SB-compatible or keyboard + mouse composite device (keyboards
with built-in USB hubs are not supported).
• Windows® 2000
Mice
• Windows XP (Home/Professional)
• USB-compatible (non-composite)
• Windows 2003 Server
Monitors
• Windows 7
• Digital displays with DVI-D support, single-link and dual-link
• Windows 8
•A
nalog displays with VGA support (adapters are required
and sold separately)
• Windows Vista®
• Red Hat® Linux®
Common Access Card Readers
• Other Linux distributions
• USB-compatible CAC or Smart Card Readers
• Mac OS® X v10.3 and higher
Advanced Secure 8-Port and 16-Port DVI-I KVM
7
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Unit Display Diagram, Front View
12345678
Port Selector
Front Plate
LED Indicator
Tamper-Evident Seal
IMPORTANT
NOTICE:
CAC Enable Switch
Color Chip
If for any reason
the tamper-evident
seal is missing,
appears disrupted,
or looks different
than the example
shown here, please
call Belkin Technical
Support at (800)
282-2355.
Name Label Guide
Back Plate
(F1DN116C model shown)
100-240VAC
0.9A Max, 50/60 Hz
Advanced Secure 8-Port and 16-Port DVI-I KVM
8
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Back View
Console USB
Mouse Port
Console USB
Keyboard Port
Console USB CAC Port
Computer DVI, USB
and Audio/Mic Ports
Back Plate
Console Audio
Input Jack
Computer CAC USB Port
100-240VAC
0.9A Max, 50/60 Hz
Power Switch
Console Monitor Port
AC Power Inlet
Video Diagnostic LED
(F1DN116C model shown)
Advanced Secure 8-Port and 16-Port DVI-I KVM
9
OVERVIEW
Table of Contents
sections
1
2
3
4
5
6
7
8
Specifications
Part No.:
F1DN108C, F1DN108F, F1DN116C
CPU Keyboard/Mouse Ports: USB Type B
Enclosure: SPCC steel-metal enclosure with
aluminum faceplate
CPU CAC Ports:
CPU Keyboard/Mouse Ports: USB Type B
Power Requirements:100–240VAC, 0.9A Max, 50/60Hz
AC Input:
100 to 240VAC
No. of Users Supported:
1
No. of Computers Supported:8 (F1DN108C, F1DN108F), 16 (F1DN116C)
Monitors Supported:Single-Link and Dual-Link digital DVI-D
displays; analog VGA monitors
with adapter
Resolution Support:
Up to 2560x1600
Console Keyboard Input:
USB Type A
Console Mouse Input:
USB Type A
Console CAC Input:
USB Type A
Console Monitor Port: DVI-I Dual-Link female
Console Speaker:
3.5mm female
Advanced Secure 8-Port and 16-Port DVI-I KVM
USB Type B
10
CPU Audio: 3.5mm female
CPU Monitor Ports:
DVI Dual-Link female
Port Selectors:8 and 16 respectively for 8and 16-port models
LED Indicators:8 and 16 respectively for 8and 16-port models
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 3 years
OVERVIEW
Table of Contents
sections
1
2
3
4
Dimensions:
(F1DN108C) 17.25 (W) x 7.95 (D) x 1.7 (H) inches - (1U)
(F1DN108F) 17.25 (W) x 7.95 (D) x 3.4 (H) inches - (2U)
(F1DN116C) 17.25 (W) x 7.95 (D) x 3.4 (H) inches - (2U)
Weight:
(F1DN108C) 9.95 lbs.
(F1DN108F) 12.25 lbs.
(F1DN116C) 13.85 lbs.
Made in the USA
Advanced Secure 8-Port and 16-Port DVI-I KVM
11
5
6
7
8
installation
Table of Contents
sections
1
2
3
4
5
6
7
8
Pre-Configuration
Connection and Installation
Where to place the Switch:
Step 1 Connecting the Console to the Switch
The enclosure of the Switch is designed for desktop or rack-mount
configuration. Rack-mount brackets are included with the Switch.
Warning: Before attempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices
are powered off.
Connect your monitor, keyboard, mouse, and speaker to the rear of
the Switch in the “User Console” section.
Consider the following when deciding where to place the Switch:
• Your proximity to the port selectors on the front of the Switch
Step 2 Power Up
•T
he lengths of the cables attached to your keyboard, monitor,
and mouse
2.1 Power on the monitor.
2.2Power up the KVM Switch by connecting the power. The display
diagnostic LED should be solid green a few seconds after power
up. This indicates the display EDID information has been captured
and secured.
• The location of your computers in relation to your console
•T
he lengths of the cables you use to connect your computers
to the Switch
Warning: Avoid placing cables near fluorescent lights,
air-conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Advanced Secure 8-Port and 16-Port DVI-I KVM
12
installation
Table of Contents
sections
1
2
3
4
5
6
7
8
Step 3 Connecting Computers to the Switch
Step 4 Powering Up the Computers
3.1 Make sure all computers are powered off.
Power up all the attached computers, and check for display
and peripheral functionality. All computers can be powered on
simultaneously.
3.2Using the Belkin DVI/USB KVM Cable Kit (sold separately),
connect the computers to a port on the rear of the KVM Switch.
Note: The Cable Kit must be connected directly to a free USB port on
your computer with no USB hubs or other devices in between.
Note: Your computers should recognize the Switch and automatically
install the HID USB driver if necessary.
When you power on your computers, the Switch emulates both a
mouse and keyboard on each port and allows your computers to
boot normally. The computer connected to port “1” will be displayed
on the monitor. Check to see that the keyboard, monitor, and mouse
are working normally. Proceed to do this with all occupied ports to
verify that all computers are connected and responding correctly.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section in this User Manual.
Advanced Secure 8-Port and 16-Port DVI-I KVM
13
installation
Table of Contents
sections
1
2
3
4
5
6
7
8
Color Code Chip Installation
Port Name Label
The KVM Switch’s port-selector buttons can be color-coded for easier
identification. Refer to the installation instructions below.
The included network-name and blank labels can be placed in the
area underneath the port-selector buttons for port identification.
Note: You may have to remove the existing black color chip first.
Insert color chip
Remove color chip
with a standard paperclip
CAC
Audio
Mouse Keyboard
Console
Display
Advanced Secure 8-Port and 16-Port DVI-I KVM
14
PS2 K
Operating the KVM Switch
Table of Contents
sections
1
2
3
4
Operation
Selecting a Computer Using Port Selectors
Now that you have connected your console and computers to the
Switch, it is ready for use. You can select which computer you wish
to control by pressing the corresponding port selector on the front of
the Switch. The LED number will illuminate to indicate which computer
(or port) is currently selected. It may take approximately 1 second for
the video signal to sync after switching ports. This is normal behavior
and is dependent on the display connected. This is normal operation
and ensures that proper synchronization is established between the
monitor and the connected computers.
Keyboard and mouse inputs can only be sent to the selected
computer, and video outputs can only be received from the selected
computer. The Switch also prevents any data transfer between
connected computers, ensuring the security of your computers.
Please note that the default port at power-up is port 1. In case
of a power failure or if the power is cycled, the Switch will
default to port 1.
Advanced Secure 8-Port and 16-Port DVI-I KVM
15
5
6
7
8
Common Access Card (CAC) Configuration and OPERATION
Table of Contents
sections
1
2
3
4
5
6
7
8
Step 1 Installation
CAC connection to the computer requires a separate USB cable
connection and allows the user to specify whether there is a
CAC required for that computer or not. This allows the CAC to be
connected and controlled separately to the keyboard, mouse, video
and audio.
1.1Using the included USB cable, connect one end of the cable to
the computer that requires CAC, and the other end to the CAC
port on the KVM Switch that corresponds to the computer.
1.2Enable CAC for the same port connection in Step 1.1 by switching
the CAC switch to the right.
1.3Repeat steps above for additional computers that require CAC.
Note: Make sure that the CAC switch is disabled (left) for all other
non-connected CAC systems.
Notice: The CAC functionality was not certified by Common
Criteria. Currently, Common Criteria does not offer any guidelines
for CAC peripheral support in the Peripheral Sharing Protection
Profile. The inclusion of this functionality does not affect the
Common Criteria certification applied to the rest of the product.
Advanced Secure 8-Port and 16-Port DVI-I KVM
1.4Once configured, the CAC connection will be switched only when
required by the connected computer. When switching from a CAC
enabled port to a non-CAC enabled port, the CAC connection will
remain with the last previously selected port where the CAC was
set to enable.
16
Frequently Asked Questions
Table of Contents
sections
1
2
3
4
5
6
7
8
What does “NIAP Common Criteria validation to EAL” mean?
Does the Switch require an AC adapter?
To learn more about NIAP Common Criteria and EAL, visit
No, the Switch does not require a power adapter since it has a built-in
internal power supply, and includes a region-specific power cord.
http://www.niap-ccevs.org/
Does the Switch support Linux?
What do I do if I find that the tamper-evident seal on the Switch
has been removed or disrupted?
Yes, the Switch works with Red Hat Linux and other Linux
distributions configured for USB support.
Please call Belkin Technical Support at (800) 282-2355 immediately.
The KVM Switch’s circuitry may have been compromised.
How far can the Switch be from my computer?
What computer equipment does the KVM support?
The Switch can be located up to 15 feet (4.6m) away from your
computer due to DVI- and USB-cable limitation, unless a KVM
extender and Belkin DCU are used.
The Switch is compatible with systems and peripherals from Dell, HP,
ClearCube, WYSE, Microsoft, Logitech, and more. Please contact
Belkin Technical Support at (800) 282-2355 for compatibility issues
you may experience.
Do I have to install software to use the Switch?
Does this Switch support hot keys or On Screen Displays (OSD)?
No, the Switch does not require any software to be installed
in your computers.
No.
Does this require periodic firmware upgrades?
Can I use the Switch with a computer that does not
support USB?
No. Please note that this Belkin Secure KVM product cannot be
upgraded, serviced or fixed.
The Switch is designed to work with USB-capable computers. Call
your sales rep for Secure KVM accessories that allow support of
different input and video formats.
Advanced Secure 8-Port and 16-Port DVI-I KVM
17
troubleshooting
Table of Contents
sections
1
2
3
4
5
6
7
8
General
Video
My computer does not boot when connected to the Switch but
works fine when I connect my keyboard, video, and mouse directly
to my computer.
I am getting ghosting, shadowing, or fuzzy images on
my monitor.
•C
heck that all video cables are inserted properly to the Switch,
computer, and monitor.
•M
ake sure that the DVI/USB KVM Cable Kit is connected tightly
between the Switch and the computer.
•W
ith everything connected, power-cycle the KVM Switch to reset
the video.
The Switch does not turn on.
• Make sure the Video Diagnostic LED is solid green.
•E
nsure that the AC power cord is securely connected to both the
AC inlet and to the wall outlet.
•C
heck that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Check that the power switch is in the ON position.
• Lower the video resolution of your monitor.
• Check that the video-cable length does not exceed 15 feet (4.6m).
The Switch makes rapid clicking noises and the port LEDs flash
continuously when turned on.
•C
heck that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• The unit may have been tampered with or experienced severe impact.
•C
onnect the monitor directly into the computer you are having
trouble with to see if the problem still appears.
NOTE: This Switch is equipped with active anti-tamper triggers. Any
attempt to open the enclosure will activate the anti-tamper triggers
and render the unit inoperable. If the unit’s enclosure appears
disrupted or if all the port LEDs flash continuously, please call Belkin
Technical Support at (800) 282-2355.
Advanced Secure 8-Port and 16-Port DVI-I KVM
• Do not use video splitters.
18
troubleshooting
Table of Contents
sections
1
2
3
4
5
6
7
8
Keyboard
I am getting a blank screen on my monitor.
• Ensure that the power switch is in the ON position.
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
• Check if the display is turned ON.
• Ensure that the power cord is inserted securely to the AC inlet.
•C
heck that the keyboard you are using is connected properly to
the Switch, in the USB port labeled “Keyboard.”
•C
onnect your monitor directly to the computer to verify that your
monitor is functioning properly.
• Reboot the computer.
•C
heck that the USB cable between the Switch and the computer
is completely connected.
• Try a different video cable.
• Try connecting to a different USB port on the computer.
• Try a different monitor.
•M
ake sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
•C
heck that the display input is DVI if DVI cable is connected, and
VGA if VGA cable is connected.
•M
ake sure you are not using a keyboard with an integrated USB
hub or other USB-integrated devices.
•A
ll video inputs must match video output type. For example, if
VGA display is used, all inputs must be VGA as well.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
•D
o not combine digital (DVI-D) and analog (VGA) inputs.
Connections need to be all digital or all analog.
• Try a different keyboard.
• Do not use a USB extension cable.
I have difficulty inserting a DVI cable into the Switch.
The CAPS, NUM, and Scroll Lock lights on my keyboard do not
function when I connect to the KVM Switch.
• Check that the connectors are not bent or damaged.
This is normal operation. The lock-state information is fully functional.
Due to the security of the KVM Switch and known exploitation of
lock-state information for leakages, the LED status is not supported.
Please refer to the operating system for verification of the lock-state
information for CAPS, NUM, and Scroll Lock.
•C
heck if the contacts on the Switch DVI connectors are not bent
or damaged.
Advanced Secure 8-Port and 16-Port DVI-I KVM
19
troubleshooting
Table of Contents
sections
1
2
3
4
5
6
Mouse
CAC Related Faults
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
The CAC reader is not functioning.
7
8
• Check to see if the LED is illuminated for the CAC reader.
•C
heck that the mouse you are using is connected properly to
the Switch.
•C
onfirm that the CAC reader switch on the KVM is properly set to
the ON position.
•C
heck that the USB cable between the Switch and the computer
is completely connected.
• Try using the CAC reader on a different KVM channel.
• Try a different CAC reader.
•C
heck that computer USB and video cables are not crossed (i.e.,
computer #1 video connected to KVM port #1 while USB cable is
connected to KVM port #2).
Important Security Note:
If you are aware of potential security vulnerability while installing or
operating this product, we encourage you to contact us immediately
at the following email address: [email protected]
• Try connecting to a different USB port on the computer.
•M
ake sure the mouse works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
The [email protected] email address is not intended to
reach technical support on Belkin products or services. Any support
inquiries should be directed to [email protected]
•M
ake sure you are not using a wireless mouse or a mouse with an
integrated USB hub or other USB-integrated devices. These are
not supported by the Switch due to security policy.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a different mouse.
For extending USB, use only active USB extenders (over CAT5 cable).
Advanced Secure 8-Port and 16-Port DVI-I KVM
20
information
Table of Contents
sections
1
2
3
4
FCC Statement
6
7
8
Belkin International, Inc., Limited 3-Year Product Warranty
What this warranty covers.
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
Belkin International, Inc. (“Belkin”) warrants to the original purchaser
of this Belkin product that the product shall be free of defects in
design, assembly, material, or workmanship.
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa
Vista, CA 90094, declare under our sole responsibility that the
products: F1DN108C, F1DN108F, F1DN116C, to which this
declaration relates:
What the period of coverage is.
Belkin warrants the Belkin product for three years.
Comply with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product). Belkin
reserves the right to discontinue any of its products without notice,
and disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair or
replace the product (for example, because it has been discontinued),
Belkin will offer either a refund or a credit toward the purchase of
another product from Belkin.com in an amount equal to the purchase
price of the product as evidenced on the original purchase receipt as
discounted by its natural use.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility
that the products F1DN108C, F1DN108F, F1DN116C, to which this
declaration relates, are in conformity with Emissions Standard
EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2,
and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme á la norme NMB-003
du Canada.
Advanced Secure 8-Port and 16-Port DVI-I KVM
5
21
Information
Table of Contents
sections
1
2
3
4
What is not covered by this warranty?
6
7
8
2.Your Belkin Customer Service Representative will then instruct
you on how to forward your receipt and Belkin product and how to
proceed with your claim.
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin
product has been improperly installed, altered in any way, or
tampered with. The Belkin Product Warranty does not protect against
acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or
sags), non-authorized program, or system equipment modification
or alteration.
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspection shall
be borne solely by the purchaser. If Belkin determines, in its sole
discretion, that it is impractical to ship the damaged equipment to
Belkin, Belkin may designate, in its sole discretion, an equipment
repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from
such repair facility and of such estimate shall be borne solely by the
purchaser. Damaged equipment must remain available for inspection
until the claim is finalized. Whenever claims are settled, Belkin
reserves the right to be subrogated under any existing insurance
policies the purchaser may have.
How to get service.
To get service for your Belkin product you must take the
following steps:
1.Contact Belkin International, Inc., at 12045 E. Waterfront Drive,
Playa Vista, CA 90094, Attn: Customer Service, or call
(800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
Advanced Secure 8-Port and 16-Port DVI-I KVM
5
22
Information
Table of Contents
sections
1
2
3
4
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES,
IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS
WARRANTY.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS
ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
Advanced Secure 8-Port and 16-Port DVI-I KVM
23
5
6
7
8
© 2013 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Windows, Windows Vista, Microsoft, and IntelliMouse are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement