queue™ (for V1 Driver) (for Windows XP) Visual Presenter Image

Add to my manuals
38 Pages

advertisement

queue™ (for V1 Driver) (for Windows XP) Visual Presenter Image | Manualzz

queue™

(V4.X)

(for V1 Driver)

(for Windows XP)

Visual Presenter Image Software

User Manual

Date: 2009/08/11

i

Contents

1.

Introduction............................................................................................................................ 1

2.

System requirement .............................................................................................................. 1

3.

Automatic installation of queue™.......................................................................................... 1

4.

Manual installation of queue™ ............................................................................................ 12

5.

Start to use queue™............................................................................................................ 23

6.

Operation............................................................................................................................. 24

6.1

Main Menu........................................................................................................................... 24

6.2

Annotation Tools .................................................................................................................. 25

6.4

Camera Settings.................................................................................................................. 26

6.5

Options ................................................................................................................................ 26

6.6

Time Lapse .......................................................................................................................... 27

7.

Descriptions of Functions .................................................................................................... 28

7.1

Start the Visual Presenter.................................................................................................... 28

7.2

I would like to capture images ............................................................................................. 28

7.3

I would like to display the live image ................................................................................... 28

7.4

I would like to freeze the live image .................................................................................... 28

7.5

I would like to annotate the displayed image....................................................................... 29

7.6

I would like to add textual annotation to images.................................................................. 30

7.7

I would like to record video .................................................................................................. 31

8.

Uninstall ............................................................................................................................... 32

9.1

Uninstall queue™ ................................................................................................................ 32

9.2

Uninstall USB Driver (Case of Windows XP) ...................................................................... 32

9.

Troubleshooting ................................................................................................................... 34

10.1

Q: Installation is complete. Reconnect Visual Presenter to show [Found New Hardware]. 34

10.2

Q. No Image display when launch queue™. ....................................................................... 34 i

1. Introduction

queue™ PC and USB driver which support WIA and TWAIN standards.

2. System requirement

z z z z z

CPU : P4 1.8 GHz and above

RAM : 512MB

Graphics Card

‹ Graphics Memory: 8M Bytes above

‹ Support DirectX 9

Resolution : XGA (1024x768) and above

Free disk space : 100MB

3. Automatic installation of queue™

<Very Important> To ensure successful installation, please make sure each of the following steps is completed.

3.1. Remove the USB cable from Computer and Visual Presenter.

8

3.2. Go to Lumens™ website http://www.lumens.com.tw/eng/goto.asp

and select the model you have purchased.

3.3. Find the

[ queue 4.X+ Driver]

and press to download.

1

3.4. Press .

3.5. Select the storage location and press

[Save]

.

3.6. After download is complete, press

[Close]

.

2

3.7. After finding

[queue_PC_4.0_and_V1_XX_Setup]

, double-click it to decompress

[Setup.exe]

.

3.8. Double-click

[Setup.exe]

to start the Installation Wizard.

3.9. Select the preferred language and press

[Next]

.

3

3.10. Read License agreement and press

[Next].

3.11. Click

[Next]

to install queue™ to the preset directory

3.12. Press

[Install]

to begin the installation.

4

3.13. Press

[Finish]

to exit the wizard.

3.14. Press

[Yes]

to create a queue™ shortcut at your desktop.

3.15. Press

[Next]

to start the

[Visual Presenter V1 Setup Wizard]

.

5

3.16. Press

[Next]

to install to the recommended directory.

3.17. Press

[Next]

to start the installation.

3.18. Press

[Close]

to exit.

6

3.19. Press

[Finish]

to reboot the system now.

3.20. After reboot, please connect the USB cable on the Visual Presenter and computer.

3.21. Then a window will show up about 6 seconds later, please select

[No, not this time] and

click

[Next]

<Very Important> Steps 3.21~3.24 should be repeated three times. Please make sure each of the steps is completed to finish the installation.

7

3.22. Select

[Install the software automatically (Recommended) ]

and click

[Next]

.

3.23. Press

[Continue Anyway]

.

3.24. Press

[Finish]

.

.

8

3.25. Select

[No, not this time]

and press

[Next]

.

.

3.26. Select

[Install the software automatically (Recommended) ]

and click

[Next]

.

3.27. Press

[Continue Anyway]

.

9

3.28. Press

[Finish]

to finish

[Visual Presenter V1]

installation.

3.29. Select

[Install the software automatically (Recommended) ]

and click

[Next]

.

3.30. Select

[No, not this time]

and click

[Next]

.

10

3.31. Press

[Continue Anyway]

.

3.32. Press

[Finish]

to finish

[Visual Presenter V1 Memory]

installation.

3.33.

Verifying the installation was completed

3.33.1. Go to desktop and double-click on

[My Computer]

.

3.33.2. Check if [

Visual Presenter V1]

and

[Visual Presenter V1 Memory]

appear on the window.

3.33.2.1. If yes, installation is successful and the procedure is finished.

11

3.33.2.2. If no, proceed to the next step (Manual installation of queue™ (Windows

XP).

4. Manual installation of queue™

4.1.

<Very important > Please make sure the USB cable was connected.

4.2. Go to Lumens™ website http://www.lumens.com.tw/eng/goto.asp

and select the model you have purchased.

4.3. Find the and click to download.

12

4.4. Click .

4.5. Select the storage location and press

[Save]

to save the file.

4.6. After download is complete, click

[Close]

.

13

4.7. Find and double-click to decompress it.

4.8. Move the folder

[Visual_Presenter_V1_1.1_for Manual_Installation]

to

[ C:\ ]

.

4.9. Go to desktop and right click on

[My computer]

then select

[Properties]

.

14

4.10. Select

[Hardware]

tab and click

[Device Manager]

button.

4.11. Click the

[Other devices]

to show the

[USB Device]

.

4.12. Right click on

[USB Device]

then select

[Update driver]

.

15

4.13. Select

[No, not this time]

, then press

[Next]

.

<Very Important> This step will be repeated three times. Please make sure the step is complete to finish the installation.

4.14. Select

[Install from a list or specific location (Advanced)],

then press

[Next]

.

4.15. Select

[Search for the best driver in the locations]

, and select

[include this location in the search]

, then press

[Browse]

button.

16

4.16. Select

[Visual Presenter V1 1.1 Manual],

then press

[OK]

.

4.17. Click

[Next]

.

4.18. Press

[Continue Anyway]

to install

[USB Composite Device]

.

17

4.19. Press

[Finish]

.

4.20. Select

[No, not this time]

then press

[Next]

.

4.21. Select

[Install from a list or specific location (Advanced) ]

, then press

[Next]

.

18

4.22. Press

[Next]

.

4.23. Process

[Continue Anyway]

to install

[Visual Presenter V1]

.

4.24. Press

[Finish]

.

19

4.25. Select

[No, not this time]

then press

[Next]

.

4.26. Select

[Install from a list or specific location (Advanced) ]

, then press

[Next]

.

4.27. Press

[Next]

.

20

4.28. Process

[Continue Anyway]

to install

[Visual Presenter V1]

.

4.29. Press

[Finish].

4.30. A message

[Found New Hardware]

will pop up on desktop.

21

4.31.

Verifying the installation was completed.

4.31.1. Go to the desktop and click

[My Computer]

.

4.31.2. Do you see [

Visual Presenter V1]

and

[Visual Presenter V1 Memory]

.

4.31.2.1. If Yes then close the procedure.

4.31.2.2. If NO. please contact your dealer or service center.

22

5. Start to use queue™

5.1. Double-click the queue™ icon on the desktop to launch queue™..

5.2. Click the queue™ icon to launch main functions menu

Æ

23

6. Operation

6.1 Main Menu

POWER

:

Turn the visual presenter on / off

AUTO TUNE

:

Automatically adjust the image for best possible quality.

OPTIONS

:

Select video compression method and the audio source.

MAIN:

Launch the main functions menu

Right click on this icon to show information about the queue.

CAMERA SETTING

:

Launch the Camera Setting window to adjust live images

FREEZE

:

Freeze a live image

CLOSE:

Close the advanced functions menu

RECORD

:

Record videos

LAMP

:

Turn the lamp on / off

PREVIEW

:

Display live images

BRIGHTNESS

:

Adjust image brightness

ZOOM:

Zoom in/out from the image

ADVANCE

:

Launch the advanced functions menu

ANNOTATION

:

Display annotation tools

TIME LAPSE PHOTOGRAPHY:

Capture images at a pre-set intervals

CAPTURE

:

Capture still images

24

6.2 Annotation Tools

ICON Description

Pointer tool

Laser tool

Insert text

Draw a line

Draw an ellipse

Draw a rectangle

Free-hand drawing tool

Eraser

Clear all

Select pen color

Select line thickness

25

6.4 Camera Settings

Control the live image via the

Camera Settings

interface. The operating procedure is the same as the

remote control

and

control panel

of the

Visual Presenter

. Refer to the Visual Presenter user manual for more information.

<Note> The display of the button may vary depending on product functions. An inactive button will grey out.

6.5 Options

26

¾

Video Compress Codec

Format

Set the video format.

¾

<Note>You need to enable the [Enable Video Compress] before setting.

¾

Enable Video Compress

Enable the video format setting.

¾

Enable Audio Recorder

Enable the audio record device and set the audio source.

6.6 Time Lapse

Select file directory to change the default.

Specify a file name..

Set the start time.

Capture images at a pre-set intervals .

27

7. Descriptions of Functions

7.1 Start the Visual Presenter

7.1.1 Click

7.2 I would like to capture images

<NOTE> You can click refer to 6.5 Time Lapse.

to change time lapse setting, more details please

7.2.1 Click then a Save As window will be displayed.

7.2.2 Key in the file name then click

[Save]

.

7.3 I would like to display the live image

7.3.1 Click to display the live image.

7.4 I would like to freeze the live image

7.4.1 Click to freeze the live image of queue™

28

7.5 I would like to annotate the displayed image

7.5.1 Click to open the annotation tools.

7.5.2 The default mode is [Pointer Tool]. You can select another annotation tool.

7.5.3 Select a color for drawing.

7.5.4 Set the value of Line width (If the value is higher, the line is thicker).

7.5.5 Mark or annotate the displayed image.

<Remark> You can Click to capture images that you draw.

29

7.6 I would like to add textual annotation to images

7.6.1 Click to open the annotation tools.

7.6.2 Select

7.6.3 The window will pop up when you click the screen for the text to be added in.

7.6.4 Enter the text in blank fields and click

[OK]

.

7.6.5 Click to change font’s settings (size/color/effect).

<Remark> You can Click to capture images that you draw.

30

7.7 I would like to record video

7.7.1 Click to open the video tool.

<NOTE> You can click to change video format and audio source setting, more details please refer to 6.4 Options.

7.7.2 Click then a window will be displayed.

7.7.3 Key in the file name then click

[Save]

to start recording. <insert image>

7.7.4 Click to stop recording.

7.7.5 Click to close the record tool.

31

8. Uninstall

9.1 Uninstall queue™

9.1.1 Select

[Uninstall queue]

in the

[Program]

to uninstall.

9.1.2 Press

[OK]

.

9.1.3 The system will start running uninstall and removing related components.

9.1.4 The uninstallation was completed, and the system will automatically exit the uninstall wizard.

9.2 Uninstall USB Driver (Case of Windows XP)

9.2.1

[Program]

Æ

[Control Panel]

Æ

[Add or Remove Programs].

9.2.2 Find , and then click

[Remove]

.

32

9.2.3 Press .

9.2.4 Once the un-installation is done, please click

[Finish]

to reboot the computer.

33

9.

Troubleshooting

10.1 Q: Installation is complete. Reconnect Visual Presenter to show [Found

New Hardware].

Solution

1. Press to skip this interface.

2. Please switch to another USB port of the computer until

[Found New Hardware]

does not show up anymore.

3. If it appears again, return to Step 1.

10.2 Q. No Image display when launch queue™.

Solution

1. Please check if USB cable is connected between document camera and computer.

2. Please try to change the DIP switch setting to

[XGA]

mode. Refer to the Visual Presenter user manual for more information.

3. Please make sure the driver installation is successful.

„ Right click on

[My Computer]

on you desktop.

„ Select from the list.

34

„ You will see below image that Hardware tab highlighted, Click on the

[DEVICE

MANAGER]

button.

„ A box should open up as shown.

[Device Manager]

contains all your hardware that you have installed.

If you can see

[Visual Presenter V1]

and

[Visual Presenter V1 Memory]

under

[Image devices]

when you connect USB cable between document camera and computer, it means the installation is successful.

35

4. Please confirm if you turn on [

Hardware acceleratio

.

n]

.

„ Go to desktop and right-click

[Properties]

.

„ Click

[Setting]

and select

[Advanced]

.

„

[Troubleshoot]

to turn the

[Hardware acceleration]

to full.

36

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals