Christie - Extron Electronics

Christie - Extron Electronics
IP Link® Device Interface
Communication Sheet
chri_1_2670_6.pke
Revision: 1/29/2009
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user’s manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Christie
1.01 KC6A
LX380, LX450, LX500, LX120
Version History:
Driver
Version
Date
IP Link
Compiler
IP Link
Firmware
GC2
Version
Notes
6
1/28/09
1.3.11.1
1.14
2.5.0
Beta. Added Temperature and Total Running Hours.
5
12/17/08
1.3.11.1
1.14
2.5.0
Beta. Revised lamp hour query for new projector firmware.
4
6/11/08
1.3.11.1
1.12
2.4.0
Beta. Added pin assignments diagram for LX120.
3
05/01/08
1.3.11.1
1.12
2.4.0
Beta, Added LX120 model.
2
02/22/08
1.3.11.1
1.12
2.3.0
Beta version. Added LX500, Changed command order.
1
12/21/07
1.3.11.1
1.12
2.3.0
Beta version.
Driver Notes:
Page 1 of 4
IP Link® Device Interface
Communication Sheet
chri_1_2670_6.pke
Revision: 1/29/2009
Control Commands & States:
Aspect Ratio
Normal
Wide
Audio Mute
On
Off
Auto Image
Execute
Freeze
On
Off
Input
RGB 1
SCART
DVI
HDCP
Video 2
Y Pb/Cb Pr/Cr
RGB 2
Video 3
S-Video
Lamp Mode
Normal
Eco
High
Power
On
Off
Video Mute
On
Off
Volume
Up
Down
Volume
0 - 63
Page 2 of 4
Full
IP Link® Device Interface
Communication Sheet
chri_1_2670_6.pke
Revision: 1/29/2009
Status Available:
Aspect Ratio
Normal
Wide
Audio Mute
On
Off
Connection Status
Connected
Disconnected
Device Status
Normal
Power Fail
Status Unavailable
Temp Warning and
Recovered
Processing Power Save
(Cooling Down)
Temp Warning and
Cooling Down
Cooling Down (Lamp
Failure)
Standby (Lamp Failure)
Freeze
On
Off
Input
RGB 1
SCART
DVI
HDCP
Video 2
Y Pb/Cb Pr/Cr
RGB 2
Video 3
S-Video
Lamp Mode
Normal
Eco
High
Lamp Usage
Hours
Power
On
Off
Power Status
On
Off
Warming Up
Status Unavailable
Temperature 1
°C*
Temperature 2
°C*
Total Usage Time
Hours
Video Mute
On
Volume
0 - 63
Off
*Temperature is rounded up to the nearest whole number.
Page 3 of 4
Cooling Down
chri_1_2670_6.pke
IP Link® Device Interface
Communication Sheet
Revision: 1/29/2009
Cable and Adapter Requirements LX380, LX450, LX500:
F/F gender changer (Extron Electronics P/N 10-438-10)
M/F RS-232 straight serial cable (Extron Electronics P/N 26-433-XX)
Use control adapter Mini 8 Pin DIN to DB9 Serial Cable that is supplied with projector.
Cable and Adapter Requirements LX120:
F/F gender changer (Extron Electronics P/N 10-438-10)
M/F RS-232 Null serial cable.
Notes for the Device:
Serial communication:
Port Type: RS232
Baud Rate: 19200
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram for LX380, LX450, LX500:
Pin Assignments Diagram for LX120:
Note for LX380, LX450, LX500:
Captive screw connector may also be used as a serial connection by shorting projector’s RTS/CTS pin to ground. If
communication problem still exists, try grounding Pin 5 (RTS/CTS) of the 8 PIN together with Pin 4, 7, & 8.
Page 4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement