ERS-106A - Osmio Water Filters
Memo
P URE PRO
DRINKING WATER SYSTEM
Type of product
Date of purchase
Name
Tel
REVERSE OSMOSIS SYSTEM
Address
REVERSE OSMOSIS SYSTEM
ERS-106A
USER'S MANUAL
PURE-PRO
15
01
Introduction of ERS-106A
02
What is reverse osmosis
03
Components & Selected filters
04
Cartridge filters
05
The parts of ERS-106A
06
Tubing connection diagram
07
Installation diagram
08
Change filters
09
Change membrane
10
Operation regulation
12
The functions of Alkaline filter
13
FAQ
14
Maintenance checking list
15
Memo
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
the regulations.
Maintenance checking list
Introduction of ERS-106A
¨ERS-106A Quick-change RO system
PURE-PRO
01
Filters
1st stage
2nd stage
3rd stage
4th stage
5th stage
6th stage
Date
REVERSE OSMOSIS SYSTEM
Quick-change cartridge filters
** Quick-Change RO systems are so easy to service !!
The newly designed quick-change RO system is user friendly with design
simplicity in mind. It requires no tools for filter changes. Use twist and quickchange cartridge design makes filter changes fast, clean and easy. This space
saving allows maximum use of your under counter space.
14
¨Specifications
PURE-PRO
REVERSE OSMOSIS SYSTEM
PurePro ® Quick-Change RO system uses the most advanced water treatment
technology: "Reverse Osmosis". Reverse Osmosis (RO) is recognized as one of
the best available technologies for producing best quality drinking water. It's also
the same method used by many bottled water companies to make safe and great
tasting water. No other home water treatment system can offer you as much
protection and reliability.
Production: 50 GPD / 189 LPD
Water storage tank: 3.2gallons / 12.2 liters
Operation pressure: 50 - 100 psi
Dimensions: (cm) 29 (L) x 42.5 (H) x 21 (W) - system
(cm) 28 (L) x 28 (W) x 35 (H) - tank
Weight: 8 kg - system
4 kg - tank
ERS-106 Quick-Change RO Systems
ERS-106 Quick-Change RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
FAQ
What is reverse osmosis
Q: What is the guarantee on the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Reverse osmosis was originally designed to make sea water drinkable for the
navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore
size much smaller than bacteria virus, or the cryptosporidium parasite. When
functioning properly it will remove all microorganisms from tap water and produce
PURE-PRO
13
water purification system, the goal is not to dilute the salt solution, but to
osmotic flow is reversed, water from the salt solution is forced to pass through the
membrane in the opposite direction by application of pressure-thus the term
REVERSE OSMOSIS. Through this process, we are able to produce pure water
by screening out the salts and other contaminants.
02
Reverse Osmosis
Pressure
Membrane
Q: Can the PurePro system be connected to an extra faucet?
It only takes a 1/4" tee and tubing to run the water to a refrigerator or a extra
faucet. Some families run PurePro system to all of their bathrooms.
Water flow
Q: What does the PurePro series drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
separate the pure water from the salt and other contaminants. When the natural
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
2.Temperature-760F is the ideal water temperature for R.O. 400F water will
cause the production of R.O. water to fall to half of that at 760F. The maximum
water temperature recommended is 850F.
3.Total Dissolved Solids (TDS)-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.Membrane-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes TW30-1812-50 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Components & Selected filters
Tubing
Water storage tank
Tank ball shut-off valve
Produces perfectly ph-balanced alkaline water, helps minimize the fluctuations of
your body's pH.
Turn acidic drinking water into alkali calcium ion water.
This natural calcium, magnesium, sodium, potassium ions can be absorbed 100%
by the body.
It is easily absorbed in the body because it has structurally smaller molecules which
help the body take in more water and replenish quickly lost water.
Makes the water cleaner and healthier.
This filter improves the qualities of clean water by adding necessary for proper
human development and health minerals, such as Calcium, Magnesium, Sodium,
Potassium and others readily found in many natural mineral waters.
Mainly installed with RO systems to complement their absolute filtration qualities.
12
PURE-PRO
03
REVERSE OSMOSIS SYSTEM
Standard faucet
The Alkaline filter changes the acidic RO water into a perfect Natural Alkali Calcium
Ionized Water. The PurePro ® Alkaline filter simply gives back minerals such as ionized
calcium, magnesium, sodium, potassium ion, which were taken away while purifying
the water. The PurePro® Alkaline filter is effective and give the water pH value of
8.00~9.50
Technical Specifications:
Diameter: 53mm
Length: 254mm
Max. flow rate: 250 l/24h
Max. pressure: 6bar
Max. temperature: 510C
Balance pH: pH8.00~9.50
Capacity: 3000 liters
Needle valve
Drain saddle
¨Selected filters
T.D.S
Mineral
Cations in filtered water:
Ca 2+: 55mg/l
Mg 2+: 18mg/l
Na +: 22mg/l
K +: 8.5mg/l
Anions in filtered water:
CO 32-: 8mg/l
SO 42-: 0.2mg/l
Cl -: 0.6mg/l
F -: 0.03mg/l
Mineral cartridge filter
TDS meter
®
Infra-Red
UVC-LIGHTING
ULTRAVIOLET WATER STERILIZER
Infra-red cartridge filter
UV water sterilizer
The alkaline water after the PurePro alkaline filter has perfectly balanced proportions
of minerals necessary for healthy development of the human body. The Alkaline filter
changes the acidic RO water into a perfect natural alkaline water. It will reduce acidity
in the body and it will produce natural calcium, magnesium, sodium and potassium ions
that can be absorbed 100% in the human body.
ERS-106 Quick-Change RO Systems
ERS-106 Quick-Change RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
¨Components
The functions of Alkaline Filter
Operation regulation
A.With everything connected, turn on the water check for leaks.
B.Make sure the storage tank shut-off valve is "OFF". Open the sink
top faucet.
C.Within a few minutes (up to 15) the water will start to run from the
Cartridge filters
Cartridge Filters
Stage 1
5 Micron
Sediment Filter
Filter Description
S300ST
Service Life
6 Months
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
faucet slowly.
D.Let the water run for at least 30 minutes. This flushes the carbon
GAC Carbon Filter
the sink top faucet.
6 Months
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
F.Tank will now full of water (usually 2 to 3 hours) after the tank has
filled. Open the sink top faucet and drain all water until the storage
tank is empty and there is only a small flow from the sink top
faucet.*** DO NOT USE FIRST TANK OF WATER.***
Stage3
CTO Carbon Filter
G.Close the sink top faucet. The system is now ready for use.
S300RD
6 Months
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
04
H.Change filters regularly every 6 to 12 months and have the
membrane checked annually.
Stage 4
TFC Membrane
Caution
1.Do not use hot water (over 45 0C)!
2.Do not freeze the machine!
3.Switch off electricity and water source if away for more than 5 days,
Stage 5
Post Carbon Filter
and drain out pure water.
Stage 6
Alkaline Filter
A thin film composite (TFC) high quality
membrane that processes 50 gallons per day. It
remove the following hard water contaminants
that may be present in your water: lead, cooper,
barium, chromium, mercury, sodium, cadmium,
fluoride, nitrite, nitrate, and selenium.
2 Years
NSF approved. This post carbon filter is designed
to improve taste. It removes any residual
impurities and odors from the tank and provides a
finer conditioning of pure water.
1 Year
The Alkaline filter changes the acidic RO water into
a perfect Natural Alkali Calcium Ionized Water. The
Alkaline filter simply gives back minerals such as
ionized calcium, magnesium, sodium, potassium
ion, which were taken away while purifying the
water.
1 Year
ERS-106 Quick-Change RO Systems
ERS-106 Quick-Change RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
PURE-PRO
11
E.After initial flushing, open the shut-off valve on the tank and close
S300ND
REVERSE OSMOSIS SYSTEM
Stage 2
filters on first time use.
The parts of ERS-106A
Operation regulation
1 Turn on water source.
Input water
To RO system
The 3rd stage filter
The 2nd stage filter
2 Switch on water tank.
PURE-PRO
10
PURE-PRO
05
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
The 1st stage filter
To drain out tube
To the tank
To the faucet
Flow restrictor
Alkaline filter
Post carbon filter
3 Let the water run for at least 30
minutes. This flushes the carbon
filters on first time use.
RO membrane housing
ERS-106 Quick-Change RO Systems
ERS-106 Quick-Change RO Systems
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
Change membrane
1 Turn off water source.
CONNECTING THE COLOR TUBING:
A. Connect the WHITE tubing to the water supply connector.
B. Connect the BLUE tubing to the sink top faucet.
C. Connect the BLACK tubing to the drain saddle.
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
D. Connect the RED tubing to the storage tank.
To RO system
4 Remove the membrane housing
cap anticlockwise.
3 Remove the tube.
PURE-PRO
06
PURE-PRO
09
Faucet
B
C A
Input water
6 Install the membrane by carefully
pushing the spigot end into the
socket at the far end of the housing
until completely in.
5 Remove the membrane by a pincer.
Drain
D
E
UR
DR
2 Switch off water tank.
Tubing connection diagram
IN
K IN
G
PR
TE
WA
R
SY
O
ST
EM
P
UR
DR
IN
K IN
E PR
G
TE
WA
R
SY
Tank
O
ST
EM
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
Change filters
Installation diagram
Input water :
1 Turn off water source.
Install water tank :
Tank ball shutoff valve
Water supply connector
To RO system
To RO system
2 Switch off water tank.
To RO system
Hand tighten
plastic shut-off
valve to tank.
Then connect
color tubing.
PURE-PRO
07
Install faucet :
Install drain saddle :
Faucet
Rubber gasket
Kitchenware table
Flat metal piece
Twisted plastic locker
Screw locker
Cutting ring
Concave type screw
Tubing
Drill a 1/4" hole into
the drain pipe.
3 Loose the used pre-filter clockwise
and remove it.
4 Screw in and install the new filter
anticlockwise.
REVERSE OSMOSIS SYSTEM
Deliver valve
08
PURE-PRO
REVERSE OSMOSIS SYSTEM
To water
source pipe
Mount drain
saddle aligning
holes.
Assemble membrane :
Remove the membrane housing cap.
Install the membrane by carefully
pushing the spigot end into the
socket at the far end of the housing
until completely in.
5 Drain out 1 Gallon of water to
purify replacement filters.
P URE PRO
DRINKING WATER SYSTEM
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
ERS-106 Quick-Change RO Systems
P URE PRO
DRINKING WATER SYSTEM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising