FINGERPRINT MODEL PB-U10BBZ100CAP / FAS

FINGERPRINT MODEL PB-U10BBZ100CAP / FAS
Content
1
2
Product Introduction ................................................................................ 5
1.1
Product Drawings .......................................................................... 5
1.1.1
Outside Drawing ........................................................................... 5
1.1.2
Dimensioned Drawing .................................................................. 6
1.2
Product Features ........................................................................... 6
1.3
Scope of Application ...................................................................... 6
1.4
Unlock Ways.................................................................................. 7
1.5
Technical Parameter...................................................................... 8
Operation ................................................................................................ 9
2.1
Basic Functions ............................................................................. 9
2.1.1
Unlock Ways................................................................................. 9
2.1.2
Alarm Function.............................................................................. 9
(1)
Low battery warning ..................................................................... 9
(2)
Tamper alarm................................................................................ 9
2.1.3
Pseudo Password Alarm .............................................................. 9
2.2
Optional Functions....................................................................... 10
2.2.1
Normally-open Function ............................................................. 10
2.2.2
Latch Bolt Alarm Function........................................................... 10
2.2.3
Connecting the Handset Function .............................................. 10
2.2.4
Access Control Function............................................................. 10
2.2.5
Dip Switch Function.................................................................... 10
2.2.6
Double Lock Function................................................................. 11
2.2.7
Door Contact Function................................................................ 11
2.3
Operation and Administration ...................................................... 12
2.3.1
Keypad Operation Method.......................................................... 12
(1)
Keypad Drawing ......................................................................... 12
(2)
Password .................................................................................... 12
(3)
Fingerprint Number..................................................................... 12
2.3.2
Management of Passwords and Fingerprints............................. 13
2.3.3
Unlock Ways............................................................................... 15
2.3.4
Right of Passwords and Fingerprints.......................................... 15
2.3.5
Points of Fingerprint Acquisition ................................................. 15
1
3
4
5
2.3.6
Emergency Power Supply .......................................................... 16
2.3.7
Installation of Batteries ............................................................... 16
Installation and Adjustment ................................................................... 17
3.1
Installation Sketch ....................................................................... 17
3.2
Installation ................................................................................... 18
3.2.1
Step 1 Drilling Holes on the Door ............................................... 18
3.2.2
Step 2 Drilling Holes for Striking Box.......................................... 18
3.2.3
Step 3 Installation ....................................................................... 19
3.3
Notes for Installation.................................................................... 20
3.4
Adjustment................................................................................... 20
Maintenance.......................................................................................... 21
4.1
Routine Maintenance................................................................... 21
4.2
FAQ ............................................................................................. 22
Appendix ............................................................................................... 24
5.1
Packing list .................................................................................. 24
5.2
Tools for Installation..................................................................... 24
2
Important Notes
1
The fingerprint lock is a high-tech product and its installation will impact its operation and
lifetime directly. It is recommended to invite a professional to install the lock according to
the user manual. If the lock can not work after installation, please contact with local
distributor or agency freely for help.
2
If your apartment is under decoration, we recommend that you dismount the product and
re-install it after decoration. The aims are to avoid corrosion of the assembly caused by
corrosive substances in the decoration, which will accelerate the chemical changes on
product’s surface, and avoid the inflexibility of the lock caused by wet paint.
3
After installation and adjustment, please clear all fingerprints and password in factory
default and enroll your own administration password and fingerprints for security.
4
Beeps for low battery warnings will be heard if it is in low power. Please replace the
batteries timely and correctly.
5
If you are to be away for several days, or the lock does not need to work for a long time,
please take along with your mechanic key and remove the batteries.
6
For user who has difficulty to enroll his fingerprint due to poor fingerprint quality, he is
recommended to enroll with his thumb, and enroll over two fingerprints to improve the
rate of successful fingerprint acquisition.
7
The fingerprint template capacity is 100, while password capacity is 5 groups. Please
save new users' detailed information in Registration Form below for convenience of
management.
8
Factory default: password is 0+12341234 but no fingerprint is included.
9
Signals and LED light: For every successful operation, long beep will be heard once and
the green LED light will flash once; but when it fails, short beep will be heard for twice, the
red LED will flash once and then exit.
10
This user manual is applicable for U series products. U30 has been taken as the example
in figures and installation instruction in this manual.
3
Enrollment Form
To facilitate the administration of fingerprints and passwords, we have made a form for
administrators to record the details of enrollment. You can also design a form to meet your
requirements for enrollment.
Fingerprint
Password
Registration
No.
No.
Date
Signature
Name
4
Note
1 Product Introduction
1.1 Product Drawings
1.1.1 Outside Drawing
01
08
02
09
03
04
10
11
05
12
13
06
07
01 Exterior sliding cover
08 Battery pack cover
02 Nixie tube
09 Batteries
03 Keypad
10 clearance button
04 Reader
11 Interior lock face
05 Exterior lock face
12 USB port
button
13 Interior lever
06 Exterior lever
07 Emergency power supply interface
Note: No lever is included in U20.
5
button
1.1.2 Dimensioned Drawing
79
155
39
160
79
75
221
Front view
Front view
36
224
287
76
Side view
Back view
Side view
1.2 Product Features
Support of unlocking the door by fingerprint, password and mechanical key;
Visual digital display and easy operation which are more convenient;
Zinc assembly which is more durable, delicate and attractive;
With functions of low battery warning, tamper alarm and pseudo password alarm;
Adoption of international advanced bio-technology is to ensure high quality of the product.
1.3 Scope of Application
Scope of application: government departments, public security bureau, army, banks, courts,
hospitals, office blocks, residential communities, etc.
6
1.4 Unlock Ways
Left handed door: When you stand outside the door and the fixed hinges are on the left, the
fingerprint lock is then defined as left handed door, which is further divided into left (push)
handed door and left (pull) handed door.
Right hand door: When you stand outside the door and the fixed hinges are on the right, the
fingerprint lock is then defined as right handed door, which is further divided into right (push)
handed door and right (pull) handed door.
Note: For U20 product, you should set the dip switch of left/right handed door before the
installation. Check 2.2.5 for more details.
7
1.5 Technical Parameter
No.
Item
Technical Parameters
1
Sensor resolution
Bright background, 500dpi
Free of damage by 1000 times of continuous
impact with a 4H pencil 20cm away.
2
Anti-sabotage ability of sensor
3
Start-up time
<1 second
4
Contrast
1:N
5
FRR
≤1%
6
FAR
≤0.0001%
7
Search angle
360°
8
Fingerprint enrollment module
One fingerprint module is generated at a time
9
Fingerprint update method
Automatic update
10
Fingerprint information
The fingerprint information will not lose when
out of power or replacing batteries.
11
Fingerprint template capacity
100
12
Light interference
Avoid bright and direct light
13
Reader
Hard glass, nano-finish surface, extremely
resistant to friction
14
Static power consumption
< 30 µA
15
Dynamic power consumption
<250mA
16
Control system
Single circuit
17
Password setting
Random change and combine
18
Password length
9 digits (1-digit ID + 8 digits)
19
Lifetime of battery
5,000 times to unlock the door
20
Operating voltage
6V DC
21
Power supply mode
Batteries
22
Password capacity
5 groups
23
Emergency power supply
9V DC
24
Low battery warning
4.9V
25
Anti-static
8KV for touch discharge, and 15KV for air
discharge
26
Operating temperature
-20℃ to 55℃
27
Operating humidity
10%-90%
28
Storage temperature
-20℃ to 70℃
29
Open door direction
Left handed and right handed
30
Door access time period groups
10 groups
(Note: Parameters subject to change without prior notice for technology innovations by the
company).
8
2 Operation
2.1 Basic Functions
2.1.1 Unlock Ways
By fingerprint
By password
By key
2.1.2 Alarm Function
(1) Low battery warning
When the lock is in low battery, short beep as warning signal will be heard for three times
and red LED light flashes every time when unlocking the door by fingerprint or password,
emptying, enrolling or deleting fingerprint. Please replace the battery timely. The enrolled
fingerprint and other settings will not be affected during the replacement of battery.
(2) Tamper alarm
When the exterior case of lock assembly is removed and opened forcibly, short beeps as
warning signals will be heard for 30 seconds and yellow LED light will flash.
2.1.3 Pseudo Password Alarm
When incorrect passwords are input for 3 consecutive times within 15 minutes, the keypad
will enter into the locking protection status and be locked for 15 minute. In this condition, if
any numeric key is pressed, alarm signals from the buzzer will be heard.
Alarm disabled method: During the locking period, if fingerprint verification is successful or
press
on Interior lock face, the keypad will exit from locking protection status.
9
2.2 Optional Functions
2.2.1 Normally-open Function
This function is applicable for U10 as well as U30.
Method to activate the normally-open function: When successfully open the door with user
fingerprint or user password, long beep will be heard once, the motor will be activated and
the lock is in unlocked status. At this time, press “0” + #, long beep will be heard once; the
normally-open function will be activated. In this condition, the door can be opened only by
rotating the lever and the green LED light will flash every 2 seconds.
Method to cancel the normally-open function: Use the fingerprint or password to unlock the
door and do not press any numeric key, the normally-open function is cancelled.
2.2.2 Latch Bolt Alarm Function
When the door is not closed completely (the latch bolt retracts a little), the red LED light will
flash and short beeps will be heard. This function is applicable for U20 and U30.
2.2.3 Connecting the Handset Function
It’s applicable for locks with handset. Refer to manual of handset for details.
2.2.4 Access Control Function
After successful verification of fingerprint or password, the door can be unlocked only within
the time period allowed by the access control function. If the verification is in the prohibited
time period, the user number will be displayed on the nixie tube and alarm signals will be
heard, and the door cannot be unlocked. The setting of the access control function shall be
completed by the handset provided by the company. For details, refer to the handset
operation manual.
2.2.5 Dip Switch Function
Dip switch function is applicable for U20 with dip switch. Check the setting of dip switch on
the interior lock face before operation. The form below is about setting of dip switch.
Switch
Up↑
Down↓
1
2
Door contact locks the
door automatically (Off)
Door contact locks the
door automatically (On)
Left
handed
Right
handed
10
3
4
Voice (off)
Reserved
Voice (on)
Reserved
Diagram of dip switch
Diagram of left/right handed door
Notes:
① The setting of left handed and right handed shall be consistent with the installation
position of the lock, or else, the lock can not work normally.
② The door contact can lock the door automatically only when the contact is installed.
③ Please use a ball-point pen or similar tools to toggle the switch to avoid damage to the
switch.
2.2.6 Double Lock Function
When the lock is in unlocked position, lift the lever (applicable for U30), long beep will be
heard and red LED light will flash, which means successful operation.
2.2.7 Door Contact Function
Door contact function is only applicable for U20 products that connect with door contact. If
door contact is installed and the function that door contact locks the door automatically has
been activated (refer to section 2.2.5 for details), the door can be locked automatically after
being closed. There is no need to unlock the door by pressing button
connected, press
. If it is not
or turn the turn piece to lock the door when the door is closed but the
lock is in unlocked position.。
11
2.3 Operation and Administration
2.3.1 Keypad Operation Method
(1) Keypad Drawing
There are six keys on the lock; they are “0”, “1”, “2”, “3”, “4” and “#”. Besides inputting
numbers, the numeric keys can also be used as the function keys .Passwords and
fingerprints can be managed by pressing the following function keys after the verification of
administration password or administration fingerprint. # is used to confirmation. For
example, you can input “1” + “#” to add new fingerprint. More details are as follow:
key
function
display
key
function
display
1
Add fingerprint
1
3
Add password
3
2
Delete fingerprint
2
4
Delete password
4
(2) Password
The password consists of one digit password number and 8 digits number. You can set 5
groups of passwords and the number is P0, P1, P2, P3, P4 (P is the operational number).P0
is administration number; you can use it to delete/add other user passwords or fingerprints.
P1, P2, P3, P4 are the default user passwords.
(3) Fingerprint Number
The maximum number of fingerprint is 100 and you can not save one fingerprint for twice.
Every fingerprint has its number and it consists of a 3digits number such as 000, 442, 321
etc. the number will display in order, e.g. 123 will be displayed as F1->23, (F mean
fingerprint). When you enroll the fingerprint you can set the fingerprint number, and every
number is just for one fingerprint. 0000 is the default number of administration
fingerprint and other numbers are of user fingerprint.
12
2.3.2 Management of Passwords and Fingerprints
Object
Clear
all
fingerprints
(1) Remove
cover.
battery
pack
(2) Press and hold fingerprint
key
for 10 seconds.①
(1) Remove
cover.
Set
administration
password
Phenomena (when the operation is
successful)
Procedures
battery
pack
(2) Press and hold password
until you hear
key
the beep.
Long beep will be heard. P0 will be displayed
on the nixie tube. And then “= =” will be
displayed on the nixie tube and “= =” will
flash.
(3)
Input
administration
password (8 digits)
“= =” will be displayed on the nixie tube
(4)Press # to confirm.
(1)
Verify
password②
Enrollment of
administration
fingerprint
administration
(2) Press Key “1”
(3) Press # to confirm
(4) Press # to confirm
(5)Fingerprint acquisition○
3
Add
user
fingerprint
Long beep will be heard. P0 will be displayed
on the nixie tube. And green LED light will be
on.
Long beep will be heard and green LED light
will be on. P0 will be displayed on the nixie
tube.
“1” will be displayed on the nixie tube
F000 will be displayed on the nixie tube and
start the function of add fingerprint.
Light on the reader will be on
Long beep will be heard and green LED light
will be on.
(1)
Verify
administration
password or administration
fingerprint
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
(2) Press Key “1”
“1” will be displayed on the nixie tube
Starting the function of add fingerprint and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another fingerprint numbers.
Light on the reader will be on
Long beep will be heard and green LED light
will be on.
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
“2” will be displayed on the nixie tube
Starting the function of delete fingerprint and
a group of number will be displayed on the
nixie tube. On the other hand, you can also
input another fingerprint numbers.
Long beep will be heard and green LED light
will be on.
(3) Press # to confirm
(4) Press # to confirm
(5)Fingerprint acquisition
Delete user
fingerprint
(single)
Long beep will be heard, “00” will be
displayed on the nixie tube and green LED
light will be on.
(1)
Verify
administration
password or administration
fingerprint
(2) Press Key “2”
(3) Press # to confirm
(4) Press # to confirm
13
Object
Procedures
(1)
Verify
administration
password or administration
fingerprint
(2) Press Key “3”
Add
user
password
(3) Press # to confirm
(4) Press # to confirm
(5) Input user password (8
digits)
(6) Press # to confirm
(1)
Verify
administration
password or administration
fingerprint
(2) Press Key “4”
Delete user
password
(single)
(3) Press # to confirm
(4) Press # to confirm
Phenomena (when the operation is
successful)
Long beep will be heard, P0/F000 will be
displayed on the nixie tube and green LED
light will be on.
“3” will be displayed on the nixie tube
Starting the function of add password and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another password numbers.
“=” will be displayed on the nixie tube
“= =” will be displayed on the nixie tube
Long beep will be heard and green LED light
will be on. The number just enrolled will be
displayed on the nixie tube.
Long beep will be heard and green LED light
will be on. P0/F000 will be displayed on the
nixie tube.
“4” will be displayed on the nixie tube
Starting the function of delete password and a
group of number will be displayed on the nixie
tube. On the other hand, you can also input
another password numbers.
Long beep will be heard and green LED light
will be on. The number just been deleted will
be displayed on the nixie tube.
Notes:
① When clearing all fingerprints and setting the administration password /clearing the
user password, press the corresponding key and hold for 10 seconds, otherwise the system
will have no response, and the operation will fail. Before clearing the fingerprint, if there comes
low battery warning, the initialization may fail. Please replace the batteries before this
operation.
② Method to verify the administration password: input 9 digits, i.e., 1-digit password
number and 8-digit password. Please keep administration password in mind after setting of it.
③ Fingerprint acquisition method: When the light on the reader is on, put the finger on the
reader and the long beep will sound three times, it is indicate the acquisition is done. If there is
just a two short beep it means failed.
④ The administration fingerprint and the administration password can add all fingerprints
and passwords, and delete all fingerprints and password except P0. The administration
password P0 can only be changed by the settings of administration password
⑤ Only an administration fingerprint number 00 and an administration password number
P0 can be enrolled if handset is not included in operation. Other numbers are for user
14
fingerprints and user passwords, which only have the right to unlock the door. If handset is
included in operation, 3 administration password and 20 administration fingerprint can be
enrolled in maximum.
2.3.3 Unlock Ways
Unlock
Phenomena (when the door is
Steps
ways
successfully unlocked)
(1)Slide up the sliding cover and
①
press #,
By
fingerprint
(2) Verify the enrolled fingerprint
Light on the reader and green LED light
will be on.
Long beep will be heard, fingerprint
number will be displayed on the nixie
tube, green LED light will be on.
(3) Open the door
By
password
Password number will be displayed on
the nixie tube, green LED light will be
on and long beep will be heard.
(1) Input the enrolled password
By
mechanical
key
(3)Open the door
(1) Insert mechanical key and
rotate it.
(2) Open the door
Important note:
For U20 product, you can unlock the door by turning the turn piece or pressing
on the
interior lock face.
2.3.4 Right of Passwords and Fingerprints
Items
Administration
password
User password
Administration
fingerprint
User fingerprint
Right
Add fingerprint and user password.
Delete all fingerprints and all passwords except for P0.
Unlock the door.
Unlock the door.
Add all fingerprints and user password.
Delete all fingerprints and all passwords except for P0.
Unlock the door.
Unlock the door.
2.3.5 Points of Fingerprint Acquisition
As most information of fingerprint template comes from fingerprint center, please put the
finger in the right position during acquisition as well as verification. Method: put the finger on
the reader moderately. Refer to the following figures:
15
OK
NO
NO
OK
NO
NO
OK
OK
NO
NO
2.3.6 Emergency Power Supply
In case that battery runs out and mechanical key has not been taken along, an external 9V
battery (6F22, 9V) can work as an emergency power supply. Connect it to the interface at
the bottom of the exterior assembly to supply power. And then unlock the door by fingerprint
or password.
2.3.7 Installation of Batteries
① Method to install the batteries: Remove the battery pack cover upward, and install four
AA 1.5V batteries, and then the battery pack cover.
② Notes: select the correct type in case of explosion; when out of service for a long period,
batteries should be taken out; never mix the new battery with the used; pay attention to
the positive and negative poles of batteries; preserve the environment by handing over
the used batteries to the designed place for reclaim; keep batteries out reach of
children and pets; in case of contact with skin, clothes or eyes, flush with water and go
to doctor.
16
3 Installation and Adjustment
3.1 Installation Sketch
01
02
13
03
04
05
06
07
08
14
09
12
11
10
16
15
01 Battery pack cover
09 Interior shim plate
02 AA batteries
10
03 Screw cover
screws
04 Round head flat nose metric screws
11 Mortise
05 Interior assembly
12 Exterior assembly
06 Spindle
13 Wooden door
07 Cross recessed raised countersunk
14 Frame
head screws
15 Striking box
08 Interior mounting plate
16 Striking plate
17
Countersunk
flat
head
tapping
3.2 Installation
3.2.1 Step 1 Drilling Holes on the Door
This product is applicable for wooden doors. The hole pattern figure is as follows (please
57
16
6
Ø10
15
25
14
13
5
12
11
4
10
9
8
3
26
The edge of door
Door side centerline
follow the 1:1 template in the packing list):
Centerline of Lock fix
6
2
5
Centerline of handle
111.5
148
7
4
0
cm
130.5
115
90
inch
2
1
0
Ø20
1
22
45
2
1
Ø10
3
4
23
Template of door lock
5
2
19
1
26.55
3
204020039
(UNITS:mm)
(SCALE:1:1)
3.2.2 Step 2 Drilling Holes for Striking Box
As shown in figures below, process the striking hole and make sure that it is at the same
height with the lock and that it aligns with the edge of door when closed.
A
木门用自攻螺钉固定
铁门用公制螺钉固定
31
27
18
69
113
131
2.5
截面A-A
A
18
3.2.3 Step 3 Installation
(1) As shown in the figure,
insert the mortise and fix it
螺钉 锁芯
on the door with screws.
门
(2) As shown in the figure,
门
install
exterior
interior
shim
assembly,
plate
and
interior mounting plate on
前锁体
the door and fix them with
raised countersunk screws.
螺钉
后盖板
后垫板
(3) As shown in the figure,
5#电池
install interior assembly and
前锁体
电池盖
spindle
on
the
interior
mounting plate and fix them
with screws, and install
门
batteries,
battery
pack
cover and screw cover.
螺钉塞
螺钉
后锁体
大方轴
19
(4) As shown in the figure,
install
螺钉
striking
box
and
striking plate on the frame
门框板
and fix them with screws.
门扣盒
And check the mortise at
last.
门框板
3.3 Notes for Installation
① Check the door thickness before installation whether it is within the requirements.
U10 is applicable for door thickness of 35-95mm, U20 for 35-80mm and U30 is
35-75mm
② Do not press the internal wire harness when fixing assemblies.
③ During installation, handle the lock carefully so as not to scratch the assemblies.
3.4 Adjustment
When the lock is fixed on the door, please adjust it as per Chapter 2 till the lock works well.
20
4 Maintenance
4.1 Routine Maintenance
1)
The lock face is prohibited to contact with corrosive substances so as not to damage
the prevention layer of the lock face and affect the glossiness of lock face.
2)
The lever is a key part of the door lock, and its performance will directly influence its
operation. Do not hang any objects on the lever.
3)
If the door is deformed, the friction between bots and striking box will be enlarged and
the bolt cannot extend fully. Hereby, the position of door striking plate should be
adjusted.
4)
The surface of reader will be dirty or wet after use of a long time. Here, you can wipe
off the dirt with a dry and soft cloth.
5)
Please replace the batteries timely when low battery warning has been heard. Pay
attention to the positive and negative poles of batteries during replacement.
6)
Please keep the mechanical key well.
7)
Do not use any hard and sharp object, including fingernail, to scratch the reader.
8)
Put the finger flat on the reader during acquisition and verification.
9)
If the lock can not be rotated flexibly or the lock can not be kept in correct position, you
should invite the professionals to fill the mortise with mechanical lubricant.
10) Ensure that transmission part of the assemblies with lubricant to maintain its
smoothness and extend its lifetime. It is recommended to check the screw condition
once every six months or one year.
11) Add some graphite powder or pencil powder to the keyway regularly (six-month or one
year) or when the key cannot inserted or pulled out smoothly. However, any oil is
rejected so as to prevent the grease sticking the ball spring and the cylinder cannot
rotate and unlocked.
21
4.2 FAQ
Problem
1.
After
successful
verification, the green
LED light will be on but
the door can not be
opened.
2. Can not unlock the
door by mechanical key.
Cause
Solution
①Incorrect installation of lock.
②Mechanical problems of
mortise or the lock cylinder
wire harness is damaged or
installed incorrectly.
①The mechanical key is
wrong.
Please turn to professionals
for help.
②The cylinder is damaged.
Try to open the door first, and
invite a professional to check
the lock and replace the
damaged parts with new
ones.
③The mortise is damaged.
④There are some mechanical
problems with clutch.
3. Rotate the exterior
lever, but the latch can
not retract completely.
Dirt bonded on parts has
blocked the cylinder.
Please turn to professionals
for help.
①This fingerprint has not
been enrolled.
②This fingerprint has been
deleted.
Unlock the door with enrolled
fingerprint or password or
mechanical key.
③The position of the effective
fingerprint is offset too much.
4. After verification, red
LED light is on and short
beep is heard, but the
door
can
not
be
unlocked.
Use correct mechanical key.
④This fingerprint is damaged.
⑤The finger is too dry or wet
or cold.
⑥Press the reader too tightly
so that the fingerprint is
deformed.
⑦Press the reader too slightly
or most of the finger is not on
the reader.
⑧Influenced
sunlight.
by
22
direct
Verify the fingerprint again.
Put the finger flat on the
reader and narrow the
distance between reader and
finger, or unlock the door by
password or mechanical key.
Enroll one fingerprint again (It
is recommend that one user
enroll over 2 fingerprints); or
unlock the door by password
or key.
Keep the finger wet\dry\warm,
before verification or unlock
the door by password or
mechanical key.
Use the correct method to
verify the fingerprint again.
Use any opaque object to
cover the light and then verify
the fingerprint.
Problem
Cause
5. After verification of
enrolled password or
fingerprint, the motor is
not activated and the
door can not be unlocked.
6. No response
keypad.
from
7. After verification of
enrolled password or
fingerprint, the motor is
activated, but the exterior
lever turns uselessly, and
the door cannot be
unlocked.
8. The door lock is in
normally-open
or
normally-closed status,
and cannot be used
normally.
①The connection
loosened.
Solution
wire
is
② Problems with motor.
Invite a professional to check
the door lock and replace the
damaged parts.
①The batteries run out or the
positive and negative poles
are reversed.
Check the battery after
unlocking
the
door
by
emergency power supply or
mechanical key.
②The
connection
harness for exterior
interior
assemblies
loosened.
Invite professionals to check
the lock after unlocking the
door by mechanical key.
wire
and
is
①The lever does not return
when verifying the fingerprint
or password.
Verify enrolled password or
fingerprint after returning the
lever.
②No spindle is installed in the
lever.
Invite professionals to check
the lock.
①Problems with motor.
②No spindle is installed in the
lever.
23
Invite professionals to check
the lock.
5 Appendix
5.1 Packing list
No.
Name
Amount
01
Lock assemblies
1
02
Mortise
1
03
Striking plate
1
04
Striking box
1
05
Screws for mortise and striking plate (optional)
4
06
Mechanical key
1
07
User manual
1
08
Template
1
09
Warranty card
1
10
Certificate of quality
1
11
AA batteries
4
5.2 Tools for Installation
Hammer- 1
Pencil - 1
Screwdriver-1
Chisel -1
Cutter knife-1
Hand drill-1
Angel square-1
Tape messure-1
Alloy bit-ø10
Alloy bit-ø60
Ribbon saw-1
Power board-1
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement