null  User manual
Cybex VR3® Lateral Raise
Owner’s Manual
Strength Systems
Part Number 12160-999-4 K
www.cybexinternational.com
Cybex VR3® Lateral Raise
Owner’s Manual
Strength Systems
Part Number 12160-999-4 K
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc.
VR3® and its mark are registered trademarks of Cybex International, Inc.
DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to
revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such
revisions or changes.
© Copyright 2010, Cybex International, Inc. All rights reserved.
Printed in the United States of America.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183
www.cybexinternational.com • [email protected] • 12160-999-4 K
Table of Contents
1 Safety
Safety. . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Guidlines and Practices . . . . . .
Warning/Caution Decals . . . . . . . . . . .
Regular Maintenance Activities . . . . . .
Using Proper Form . . . . . . . . . . . . . . .
1-1
1-2
1-3
1-6
1-6
2 Exercises
Intended Use . . . . . . . . . . . . . . . . . . . . 2-1
Instructions. . . . . . . . . . . . . . . . . . . . . . 2-2
3 Customer Service
Contacting Service. . . . . . . . . . . . . . . .
Ordering parts . . . . . . . . . . . . . . . . . . .
Return Material Authorization (RMA). .
Damaged Parts . . . . . . . . . . . . . . . . . .
3-1
3-1
3-1
3-2
4 Assembly
Assembly . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 Maintenance
Daily Procedures . . . . . . . . . . . . . . . . .
Weekly Procedures . . . . . . . . . . . . . . .
Yearly Procedures . . . . . . . . . . . . . . . .
Environment. . . . . . . . . . . . . . . . . . . . .
Storage . . . . . . . . . . . . . . . . . . . . . . . .
Page i
5-1
5-4
5-6
5-7
5-7
Cybex VR3 12160 Lateral Raise Owner’s Manual
1 - Safety
Safety
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper
operation of the equipment and review all labels.
WARNING: Serious injury could occur if these safety precautions are not observed:
User Safety Precautions
•
Obtain a medical exam prior to beginning an exercise program.
•
Read and understand warning labels and user manual prior to exercising. Obtain instruction
prior to use.
•
Keep body and clothing free from and clear of all moving parts.
•
Inspect machine prior to use. DO NOT use if it appears damaged or inoperable.
•
DO NOT attempt to fix a broken or jammed machine. Notify floor staff.
•
Use the machine only for the intended use. DO NOT modify the machine.
•
Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer.
If unsure seek assistance.
•
Never pin the weights in an elevated position. DO NOT use the machine if found in this condition.
See assistance from floor staff.
•
Children must not be allowed near these machines. Teenagers must be supervised.
•
DO NOT use if guards are missing or damaged.
•
DO NOT use dumbbells or other incremental weights, except those provided by the manufacturer.
•
Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn,
frayed or damaged.
•
DO NOT remove any labeling from equipment. Replace any damaged labels.
•
Stop exercising if you feel faint, dizzy or experience pain at any time while exercising and consult
your physician.
Facility Safety Precautions
•
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
•
Securely anchor each machine to the floor using the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or
better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using flat washers.
Safety
Page 1-1
Cybex VR3 12160 Lateral Raise Owner’s Manual
•
Make sure that each machine is set up and operated on a solid level surface. Do not install
equipment on an uneven surface.
•
Make sure that all users are properly trained on how to use the equipment.
•
Make sure there is enough room for safe access and operation of the equipment.
•
Perform regular maintenance checks on the equipment. Also pay close attention to all areas most
susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.
•
Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components then remove from service until the repair is made.
•
Use only Cybex supplied components to maintain/repair the equipment.
•
Keep a repair log of all maintenance activities.
•
Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn,
frayed or damaged.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.
Safety Guidelines And Practices
Cybex recommends that all fitness equipment be used in a supervised area. It is recommended that the
equipment be located in an access controlled area. Control is the responsibility of the owner. The extent
of control is at the discretion of the owner.
It is the responsibility of the purchaser/user of Cybex products to read and understand the owner’s
manual, and warning labels; as well as instruct all individuals, whether end users or supervising
personnel, on proper usage of the equipment.
PROPER USAGE:
Use machine only as described in the manual. Failing to follow proper instructions may result in injury.
Do Not Lean Against or Pull On the framework, weight stack, or any component, whether machine is at
rest or in use. Inappropriate or improper use may result in injury to users or third parties (bystanders).
Do not use machine if it is not located on a solid level surface or is improperly installed.
Provide an adequate safety perimeter between the machine, walls and other equipment to ensure that
the facility has the proper clearance for usage and training.
SECURING EQUIPMENT:
The machine has holes in the feet, which allow for ease in anchoring to the floor. Cybex strongly
recommends that, to eliminate rocking, tipping or falling over due to incorrect usage and misuse,
equipment be secured to a solid, level surface.
1. The solid, level surface should not deviate more than 1/8” over a 10’ distance or as defined and
required by local building and architectural codes.
2. Anchoring of equipment must be completed by a qualified licensed contractor.
Safety
Page 1-2
Cybex VR3 12160 Lateral Raise Owner’s Manual
3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the
equipment to the floor.
4. Due to the wide variation of flooring on which machines may be anchored or installed, verify anchoring method
and anchoring fasteners with a qualified and licensed contractor.
5. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position..
6. Do not use machine until it is properly anchored.
MAINTENANCE:
Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the
maintenance requirements as specified in the manual.
STANDARD COMPLIANCE:
Cybex products meet or exceed applicable ASTM and EN Standards.
Warning/Caution Decals
Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate
injury.
The warning and caution decals are shown on the following page. The diagrams following the decals show where
each decal is located.
Safety
Page 1-3
Cybex VR3 12160 Lateral Raise Owner’s Manual
A
B
CAUTION
Personal injury may occur.
Keep away from moving
parts to avoid injury.
4000Y316-4 A
C
CAUTION
D
Safety
Page 1-4
CAUTION
Cybex VR3 12160 Lateral Raise Owner’s Manual
Lateral Raise - 12160
D
B
A
C
A.
B.
C.
D.
DESCRIPTION
PART NO.
Warning Label ......................4605-381-4
Caution Decal ......................4000Y316-4
Caution Decal ......................4520-362-4
Caution Decal .....................8500-026-4
Safety
Page 1-5
Cybex VR3 12160 Lateral Raise Owner’s Manual
Regular Maintenance Activities
Preventative maintenance activities must be performed to maintain normal operation of your equipment.
Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative
maintenance activities. The preventative maintenance actions are described in detail in Chapter 5.
Briefly, they include:
Daily
1. Clean upholstery.
Weekly
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables and belts for damage or wear (see Chapter 5). If a cable or belt is worn or
damaged, immediately discontinue use until cable or belt has been replaced.
3. Check for worn handles, worn snap links, and worn warning labeling. Replace all worn parts
immediately.
4. Inspect for loose or worn grips. Replace all loose or worn grips immediately.
5. Inspect weight stacks for proper alignment and operation. Correct all improper alignment and
operation issues immediately.
6. Lubricate guide rods using automotive engine oil only.
Yearly
1. Replace all cables and belts at least annually.
Using Proper Form
Before working out, read and understand the exercises located on the placard and in Chapter 2.
Safety
Page 1-6
Cybex VR3 12160 Lateral Raise Owner’s Manual
2 - Exercise
Intended Use
MUSCLES USED
The intended use of this equipment is to aid or
improve general physical fitness and exercise.
For Commercial use.
Instructions
Read and understand all instructions and warnings
prior to using this machine. See Chapter 1, Safety
in the VR3 Owner’s Manual or consult with floor staff.
START
Deltoid
FINISH
NOTE: Motion Developed: Shoulder Abduction
NOTE: Do not turn knob when weight stack is elevated.
NOTE: All adjustment points on the machine have yellow handles or knobs.
NOTE: See next page for “Set Up” and “Movement”.
Exercise
Page 2-1
Cybex VR3 12160 Lateral Raise Owner’s Manual
Set Up
1. Adjust seat height to align shoulders with Shoulder height decal.
2. Maintain an upright posture with a slight forward tilt.
3. Grasp Handles.
Movement
1. Push handles to the side and upward while maintaining body position.
Exercise
Page 2-2
Cybex VR3 12160 Lateral Raise Owner’s Manual
3 - Customer Service
Contacting Service
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m Eastern Standard Time.
For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239.
For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183.
Find information on the web at www.cybexintl.com or e-mail at [email protected]
Ordering Parts
Fax orders to 508-533-5183. To speak with a customer service
representative, call 888-462-9239 (for customers living within
the USA) or 508-533-4300 (for customers outside the USA).
You may also contact us through e-mail at
[email protected]
Having the following information ready when calling, will assist our
Cybex representatives in serving you.
•
Unit Serial Number
•
Product Name
NOTE: All inspections
and repairs must be
performed by trained
service personnel only.
Cybex will void warranty if
non-Cybex replacement parts
are used.
The unit serial number and product name can be found on the serial number decal.
•
Part Description
•
Part Number
Part descriptions and part numbers are located on the web at www.cybexintl.com.
•
Shipping Address
•
Contact Name
In addition to your shipping address and contact name, your account number is helpful but not required.
Return Material Authorization (RMA)
The Return Material Authorization (RMA) system outlines the procedures to follow when returning
material for placement, repair or credit. The system assures that returned materials are properly handled and analyzed. Follow the
following procedures carefully.
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if
applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated
Return Service (ARS) label.
Customer
Service
Page 3-1
Cybex VR3 12160 Lateral Raise Owner’s Manual
1. Call the Customer Service Hot Line listed above for the return of any item that is defective.
2. Provide the technician with a detailed description of the problem you are having or the defect in the item you wish
to return.
3. Provide the model and serial number of your Cybex equipment.
4. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and
repair or replacement. The technician will assign you a RMA number and will send you an ARS label. The ARS
label and the RMA numbers must be clearly displayed on the outside of the package that contains the item(s) to be
returned. Include the description of the problem, the serial number of the equipment and the name and address of
the owner in the package along with the part(s).
5. Forward the package through UPS to Cybex.
Attn: Customer Service Department
Cybex International, Inc.
1975 24th Ave SW
Owatonna, MN 55060
NOTE: Merchandise returned without an RMA number on the outside of the package or shipments sent COD will not be
accepted by the Cybex receiving department.
Damaged Parts
Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier (UPS, Federal
Express, trucking companies, etc.)
Apparent Damage - Upon receipt of your shipment, check all items carefully. Any damage seen with a visual check must be noted
on the freight bill and signed by the carrier’s agent. Failure to do so will result in the carriers refusal to honor your damage claim. The
carrier will provide you with the required forms for filing such claims.
Concealed Damage - Damage not seen with a visual check upon receipt of a shipment but notices later must be reported to the carrier
as soon as possible. Upon discovery of the damage, a written or phone request to the carrier asking them to perform an inspection
of the materials must be made within ten days of the delivery date. Keep all shipping containers and packing materials as they will be
needed in the inspection process. The carrier will provide you with an inspection report and the necessary forms for filing a concealed
damage claim. Concealed damage claim is the carrier’s responsibility.Cybex, if applicable. Under no circumstances will defective parts
or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label.
Customer
Service
Page 3-2
Cybex VR3 12160 Lateral Raise Owner’s Manual
4 - Assembly
TOOLS REQUIRED
•
•
•
•
•
7/32” Allen wrench
1/8” Allen wrench
Medium weight automotive engine oil
Torque wrench
3/4” Wrench
ITEM
1
2
3
4
1
QTY
PART NO.
4
1
1
9
12090-322
12000-345
12000-560
4000C101
3
NOTE: Two people will be required for this procedure.
NOTE: It is the responsibility of the facility owner/owner
of the equipment to ensure that there is
appropriate clearance around each machine
to allow for safe use and passage.
2
DESCRIPTION
FOOT PAD
FOOT PAD
DECAL, WEIGHT PLATE (30 - 290)
WEIGHT STACK PLATE
30
13.5
50
22.5
70
31.5
90
40.5
110
49.5
130
58.5
150
67.5
170
76.5
190
85.5
210
94.5
230
4
103.5
250
112.5
270
121.5
290
130.5
1. Read and understand all instructions thoroughly before starting any of
the procedures listed on this instruction sheet.
2. Verify you have received the appropriate configuration.
A. Verify that you received the correct color machine that you ordered.
B. Verify you received the proper weight stack.
C. Verify you received the appropriate owner’s manual.
D. Verify you received the warranty sheet.
E. Verify you received the weight stack decals.
3. Move to desired location.
4. Remove shipping feet.
WARNING: Use extreme caution when removing shipping cones and installing feet.
Failure to do so could result in injury.
A. With an assistant, carefully remove each (standard) cone-shaped shipping support
using a 3/4” socket or wrench.
B. Cut shipping tie securing top weight.
C. Carefully place rubber feet (supplied with machine) on each foot of the frame.
5. Installing the weight stack.
A. If weight stack is already installed, proceed to step 9.
B. Using a 1/8” Allen wrench, remove the two Button Head Socket Cap Screws (BHSCS) securing the
bottom bracket to the frame. NOTE: Do not remove middle BHSCS securing shroud to bottom bracket.
C. Remove the remaining BHSCS securing the back shroud to the frame. NOTE: After final BHSCS
is removed shroud will slide down to the floor with bottom support bracket attached.
Assembly
Page 4-1
Cybex VR3 12160 Lateral Raise Owner’s Manual
D. Carefully slide shroud out of machine.
E. Slide spring loaded top guide rod cap down guide rod until guide rod cap is clear
of frame. NOTE: Top guide rod cap is spring loaded.
F. Slowly release grasp of guide rod cap. NOTE: Guide rod cap contains a compression spring
that will fly if grasp is not released slowly.
G. Remove guide rod cap and spring and set aside.
H. Repeat steps 5F-5H for other rod guide.
I.
Carefully lean guide rods slightly outward, away from machine to clear pulley.
NOTE: Excessive pressure on guide rods may damage lower guide rod caps.
J. Slide top weight up and out of machine and carefully set it aside.
K. Wipe guide rods clean over entire length. Lubricate with light coating of medium
weight automotive engine oil.
L. Have an assistant hold the guide rods vertical.
M. Carefully align weight plate over guide rods and slowly lower weight plate. NOTE: When installing weight
plates, position plates so wide edges of bushing face upward and narrow edges of bushing face downward.
See Figures 1A and 1B.
T
C
E
RR
CO
WIDE bushing
edge faces
upward
Figure 1A
G
N
RO
W
NARROW
bushing edge
NOTE: The narrow bushing
edge must face downward.
Figure 1B
N. Repeat step 5M-5N to install each weight plate.
O. Slide top weight over guide rods.
P. Place springs and guide rod caps on guide rods (removed from step 5G).
Q. Compress guide rod caps and ailgn guide rod caps with weight frame holes and secure in place.
NOTE: Guide rod caps must snap or lock into weight frame holes.
Assembly
Page 4-2
Cybex VR3 12160 Lateral Raise Owner’s Manual
6. Belt Routing.
Correct belt routing
A. Verify belt is routed through top of pulley bracket and
then route end of belt down to the top weight.
Wrong belt routing
Insert
Insert
Belt
Belt
B. Carefully lift top weight and verify that the position of the
belt clamp (on the top weight) is aligned properly with the
top pulley bracket.
Stem
Stem
C. Slide belt through slot in belt clamp.
Figure 2A
D. Verify belt and insert are installed properly, as shown in
Figure 2A. NOTE: Do not install the insert backwards as
shown in Figure 2B.
Front
E. Pull belt tight and secure belt to clamp with the two set
screws. NOTE: Torque set screws 300-350 in./lbs.
Back
F. Place weight stack pin in each plate to verify proper
installation.
G. Without selecting any resistance, lift top weight up
and down (simulating normal operation).
H. Have an assistant verify that the belt is moving
smoothly and is routed straight from the top
pulley bracket to the top weight belt clamp.
I.
Figure 2B
Figure 3
Guide Rod
Turn the Increment Weight Adjusting Knob to
select 0 lbs or 0 kg.
7. Install back shrouds.
9.0
Weight Stack
20
A. Carefully place shroud into position.
40
60
80
B. Starting at the bottom replace the two
BHSCS (removed in step 5D) to secure
bottom support bracket to the shroud. Install
but do not tighten remaining BHSCS securing
shroud.
C. Tighten all BHSCS.
100
Pounds
120
140
160
180
200
18.0
36.0
45.0
54.0
63.0
Kilograms
72.0
81.0
90.0
99.0
Figure 4
8. Install weight plate decals.
A. Slowly and carefully peel off back side of decal. NOTE: When peeling off back cover,
make sure that the decals remain attached to the front sticker. Figure 3.
B. Insert a guide pin through each hole of the template. NOTE: A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.
C. Carefully align decal and rub it onto weight plates.
D. Carefully remove front side, leaving decals adhering to weight plates. See Figure 4.
Assembly
Page 4-3
Cybex VR3 12160 Lateral Raise Owner’s Manual
NOTE: It is important that you perform regular inspection and maintenance activities on your equipment.
See the CYBEX Owner’s Manual for inspection and maintenance activities. If you do not have a
CYBEX Owner’s Manual or if you have any questions or concerns, call CYBEX Customer Relations
at 888-462-9239.
9. Verify proper operation
10. Securely anchor machine to the floor.
A. Securely anchor machine to the floor using
the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using flat washers.
Assembly
Page 4-4
Cybex VR3 12160 Lateral Raise Owner’s Manual
5 - Maintenance
All preventive maintenance activities must be performed on a regular basis. Performing routine
preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems
equipment.
NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting/recording. Cybex phone representatives are available to answer any
questions or concerns that you may have.
NOTE: All inspections and
repairs must be performed by
trained service personnel only.
Cybex will void warranty if
non-Cybex replacement
parts are used.
Daily Procedures
1. Upholstery - Wipe down all upholstery as per the recommendations listed below for light soiling and more difficult
stains.
Light Soiling
•
A solution of 10% household liquid soap with warm water applied with a soft damp cloth.
•
If necessary, a solution of liquid cleanser and water applied with a soft bristle brush. Wipe away the residue
with a water dampened cloth.
Maintenance
Page 5-1
Cybex VR3 12160 Lateral Raise Owner’s Manual
More Difficult Stains
•
Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite),
90% water. Rub gently. Rinse with a water dampened cloth to remove bleach concentration.
•
•
The same procedure can be used with full strength household bleach, if necessary.
Allow bleach to puddle on the affected area or apply with a soaked cloth for approximately
30 minutes. Rinse with a water dampened cloth to remove any remaining bleach concentration.
Alternative Method for Difficult Stains
•
Dampen a soft white cloth with rubbing alcohol and rub gently. Rinse with a water dampened cloth to remove
any remaining rubbing alcohol concentration.
NOTE: To restore luster, a light coat of spray furniture wax can be used. Apply for 30 seconds and
follow with a light buffing using a clean white cloth.
Please Review Carefully
When using strong cleaning agents such as rubbing alcohol or bleach, it is advisable to first test in an inconspicuous area. Other cleaning agents may contain harsh or unknown solvents and are subject to formula changes by
the product manufacturer without notice. Should you desire to use other
cleaning agents, carefully try them in an inconspicuous area to determine potential damage to the material.
Never use harsh solvents or cleaners which are intended for industrial applications. To clean stained or soiled
areas, a soft white cloth is recommended. Avoid use of paper towels.
Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and eye
protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from
exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. CYBEX and its vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
2. Frames - Wipe down all frames using a mild solution of warm water and car wash soap. Be sure to dry thoroughly. AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or
damage the equipment.
3. Chrome - Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral cleaners with
a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID acid or chlorine based cleaners
and also cleaners containing abrasives as these could scratch or damage the equipment.
4. Guidelines for cleaning front panel:
•
Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing.
•
•
Follow up the application with warm water rinse.
•
Don’t leave cleaners on for long periods, wash immediately.
Maintenance
Page 5-2
Don’t use abrasives or high alkaline cleaners.
Cybex VR3 12160 Lateral Raise Owner’s Manual
•
•
Don’t use scrapers, squeegees or razors.
•
Don’t clean with gasoline.
Don’t apply cleaners in direct sunlight or at elevated temperatures.
Compatible Cleaners and Detergents:
•
Formula 409
•
Top Job
•
•
Joy
•
Windex with Ammonia D
Palmolive
To Minimize Fine or Hairline Scratches:
Mild automotive polish applied and removed with a soft, clean cloth will help fill scratches.
Suggested Polishes:
•
Johnson Paste Wax
•
•
Mirror Glaze #10 Plastic Polish (by Mirror Bright Polish Co.)
Novus Plastics Polish #1, #2 (By Novus Inc.)
Maintenance
Page 5-3
Cybex VR3 12160 Lateral Raise Owner’s Manual
Weekly Procedures
1. Check all nuts and bolts for looseness. Tighten as required.
2. Inspect all belts (entire length) for any non-uniformity and wear.
Immediately replace belt if any of the following conditions are present:
Maintenance
Page 5-4
Cybex VR3 12160 Lateral Raise Owner’s Manual
3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper tension.
When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and
attachment points.
WARNING: Replace all worn cables immediately. The following conditions may indicate a worn
cable:
•
A tear or crack in the cable sheath that exposes the cable. See Figure 1.
Figure 1.
•
A kink in the cable. See Figure 2.
Figure 2.
•
A curled sheath. See Figure 3.
Figure 3.
•
“Necking”, a stretched cable sheath. See Figure 4.
Figure 4.
Maintenance
Page 5-5
Cybex VR3 12160 Lateral Raise Owner’s Manual
4. Inspect bars and handles for wear, paying particular attention to tab area connecting points.
Replace all worn handles immediately.
5. Inspect snap links for proper latching (indicates wear).
Replace all worn snap links immediately.
6. Inspect for loose or worn grips.
Replace all loose or worn grips immediately.
7. Inspect all labeling for readability. This includes instructional placards, warning and caution decals.
Replace all worn labeling immediately.
8. Inspect all weight stacks for proper alignment and operation.
Correct all improper alignment and operation issues immediately.
9. Wipe Weight Stack Guide Rods clean over entire length. Lubricate with a light coat of medium weight
automotive engine oil.
Yearly Procedures
1. Replace all belts cables at least annually.
Maintenance
Page 5-6
Cybex VR3 12160 Lateral Raise Owner’s Manual
Environment
Static Electricity - Depending upon where you live, you may experience dry air, causing a common
experience of static electricity. This may be especially true in the winter time. You may notice a static
build-up just by walking across a carpet and then touching a metal object. The same can hold true
while working out on your unit. You may experience a shock due to the build-up of static electricity on
your body and the discharge path of the unit. If you experience this type of situation, you may want to
increase the humidity to a comfortable level through the use of a humidifier.
Humidity - The unit is designed to function normally in an environment with a relative humidity range
of 30% to 75%.
NOTE: Do not install or use the unit in an area of high humidity, such as in the vicinity of a steam
room, sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or
bromine could adversely affect the electronics as well as other parts of the machine.
Temperature - The unit is designed to function normally in an environment with an ambient
temperature range of 50 F (10 C) to 104 F(40 C) degrees.
o
o
o
o
Storage
Humidity - The unit can be shipped and stored in an environment with a relative humidity range of
10% to 90%.
NOTE: Do not store the unit in an area of high humidity, such as in the vicinity of a steam room,
sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine
could adversely affect the electronics as well as other parts of the machine.
Temperature - The unit can be shipped and stored in an environment with an ambient temperature
range of 32 F (0 C) and 140 F (60 C) degrees.
o
o
o
Maintenance
Page 5-7
Cybex VR3 12160 Lateral Raise Owner’s Manual
This page intentionally left blank.
Maintenance
Page 5-8
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183
www.cybexinternational.com • [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement