SHOP SUPPLIES M1 - Imperial Supplies LLC

SHOP SUPPLIES M1 - Imperial Supplies LLC
SHOP SUPPLIES
M26
M40-M41
M27
M16-17
Batteries
Drum & Barrel Pumps
Electrical Boxes & Receptacles
Extension Cords
M46-M52
M42-M43
M18-M25
M34-M37
Hand Tools
Leak Detection
Lighting
Lubrication
M38-M39
M44-M45
M9-M12
M2-M8
Maintenance Tools
Parts Washing
Pneumatics
Shop Air Hose
M28-M33
M38
M53-M65
M12
Tape
Tool Boxes & Tool Storage
Vehicle Cleaning & Appearance
Vehicle Lifting Tools
M13-M15
M66-M73
Washing
Welding
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M1
SHOP SUPPLIES
SHOP AIR HOSE
RUBBER SHOP AIR HOSE
RUBBER SHOP AIR HOSE
RUBBER AIR HOSE FOR
USE WITH NITROGEN
• High-strength rubber cover provides
maximum abrasion resistance.
• Remains flexible in extreme cold.
• Pre-assembled with male fittings on both
ends, includes bend guards.
• Tube designed to handle oil-laden air.
• Suitable for agricultural spray applications.
• High-tensile reinforcement for extended life.
• Excellent service for all commercial applications.
PART NO.
I.D.
O.D.
WORKING
PRESSURE
95939
95930
95931
95937
95932
95933
95938
95934
95935
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
23/32
23/32
23/32
29/32
29/32
250 psi
250 psi
250 psi
250 psi
200 psi
200 psi
200 psi
300 psi
300 psi
• Green for identification for use with nitrogen only.
• Features a medium-high, oil resistant tube.
• Cover is made resistant to oil, abrasion,
weathering and ozone with a heavy duty
four spiral reinforcement.
• Kink resistant and flexible.
COVER
COLOR
MALE
PIPE
QTY.
FEET
Red
Red
Red
Red
Red
Red
Red
Red
Red
1/4 NPT
1/4 NPT
1/4 NPT
N/A
1/4 NPT
1/4 NPT
N/A
1/2 NPT
1/2 NPT
12
25
50
300
25
50
300
25
50
PART NO.
I.D.
O.D.
WORKING
PRESSURE
COVER
COLOR
MALE
PIPE
QTY.
FEET
96023
96024
3/8
3/8
23/32"
23/32"
300 psi
300 psi
Green
Green
1/4 NPT
1/4 NPT
25
50
SEE PAGE K7
Coated Gloves
Male fittings not included with bulk air hose.
See Barbed Fittings, Part No. 92100, 92103 and 92104.
PVC SHOP AIR HOSE
PVC SHOP AIR HOSE
• PVC covered hose for better oil and
abrasion resistance compared to rubber
shop air hoses.
• Kink proof construction.
• Comes with bend restrictors.
WORKING
PRESSURE
PART NO.
I.D.
O.D.
96021
96022
3/8
3/8
21/32 300 psi
21/32 300 psi
SEE PAGE K11-K19
COVER
COLOR
MALE
PIPE
QTY.
FEET
Yellow
Yellow
1/4 NPT
1/4 NPT
25
50
Eye Protection
AIR HOSE REELS & ACCESSORIES
AIR HOSE REEL
MANUAL AIR HOSE REEL
• Heavy-duty all-steel construction.
• Auto retractable.
• Perfect for mounting on
a wall, floor, or ceiling.
• Includes rubber hose.
• Use with air or water.
• Maximum working pressure: 300 psi
• Reel can be mounted horizontally or vertically.
• All-steel construction.
• Includes a solid brass 1/4" NPT swivel fitting.
• Maximum working pressure: 250 psi
• Air hose sold separately. Color of reel may vary.
PART NO.
HOSE SIZE
INLET
FNPT
OUTLET
MNPT
QTY.
95911
95912
95913
95910
3/8 x 25'
3/8 x 50'
3/8 x 50'
1/2 x 50'
3/8
3/8
3/8
1/2
1/4
1/4
3/8
1/2
1
1
1
1
M2
CALL
1-800-558-2808 /
PART NO.
CAPACITY
NPT
QTY.
95995
3/8 x 100'
1/4
1
AIR REEL BUMPER
• Hose stop for 3/8" and 1/2" hose.
FAX
PART NO.
DIAMETER
QTY.
95993
3"
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
SHOP AIR HOSE
P O LY U R E T H A N E S H O P A I R H O S E
POLYURETHANE SHOP AIR HOSE ASSEMBLIES
FLEXEEL® REINFORCED
POLYURETHANE SHOP AIR HOSE
• Lightweight and lasts 10 times longer than other hoses.
• Because of polyurethane toughness, spring guards are not needed.
• All hose assemblies have 1/4" NPT swivels to make it easier to install.
• Resistant to most oils and fuels. Neon-green color for safety.
• Will not kink or lose its memory.
• Replacement fittings available.
• Retains flexibility in subzero
temperatures from -40° F to 165° F
• Resistant to lubricating oils, grease and abrasion.
• UV stabilized for longer outdoor service life.
• Will last 4 to 5 times longer than standard
rubber shop air lines under normal use.
• One third the weight of rubber shop air hose.
PART NO.
I.D.
O.D.
WORKING
PRESSURE
COVER
COLOR
MALE
PIPE
QTY.
FEET
95915
95916
95948
95918
3/8
3/8
3/8
1/2
9/16
9/16
9/16
45/64
200 psi
200 psi
200 psi
200 psi
Blue
Blue
Blue
Blue
1/4 NPT
1/4 NPT
1/4 NPT
1/2 NPT
25
50
100
50
PART
NO.
I.D.
O.D.
COVER
COLOR
QTY.
FEET
95980
95983
95984
95985
5/32
1/4
1/4
1/4
1/4
3/8
3/8
3/8
Green
Green
Green
Green
15'
3'
15'
25'
TECHNICAL INFORMATION
SIZE
O.D. X I.D.
APPROXIMATE BURST PRESSURE PSI @VACUUM RATING
75° F
100° F
125° F
150° F
VACUUM RATING
HG @ 75° F
1/4 x 5/32
3/8 x 1/4
370
380
290
320
240
270
170
190
28
28
P O LY U R E T H A N E C O I L E D A I R T U B I N G F I T T I N G S
FITTINGS FOR POLYURETHANE COILED AIR TUBING
FLEXEEL® REPLACEMENT END
• Use on polyurethane tubing only.
• Pre-applied Vibraseal® to seal and lock threads.
• All fittings have swivels.
• Brass construction.
• Fitting for polyurethane coiled air tubing.
• Use on polyurethane tubing only.
• Pre-applied Vibraseal® to seal
and lock threads.
• Fitting has swivels.
• Brass construction.
PART NO.
HOSE
O. D.
PIPE
SIZE
QTY.
95990
95991
1/4
3/8
1/4 NPT
1/4 NPT
2
2
PART NO.
HOSE
O.D.
NPT
95917
3/8
1/4
95905 1/2
1/2
Does not include strain relief
QTY.
2
1
AIR WHIPS
AIR HOSE WHIP
LEAD HOSE
• Style: Straight hose.
• Comes assembled with 1/4 MPT swivel fittings.
• Hose is made from Flexeel hose.
• Resistant to lubricating oils, grease and
abrasion.
• Use in conjunction with air tools to reduce
the wear and tear on the quick couplers.
• Lead-in hose to plumb hose reel into shop air circuit.
• Maximum Pressure: 300 psi
• Maximum Temperature: 150° F
PART
NO.
I.D.
O.D.
COVER
COLOR
MALE
NPT
QTY.
95999
3/8
9/16
Blue
1/4
3'
PART NO.
HOSE SIZE
INLET
FNPT
OUTLET
MNPT
QTY.
95907
95908
96061
3/8 x 2'
1/2 x 2'
3/4 x 3'
3/8
1/2
3/4
3/8
1/2
3/4
1
1
1
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M3
SHOP SUPPLIES
SHOP AIR HOSE
P N E U M AT I C Q U I C K C O N N E C T C O U P L E R S & P L U G S
HEAVY-DUTY QUICK DISCONNECT COUPLERS AND PLUGS
A U T O M O T I V E ( T R U - F L AT E ) D E S I G N
• Manufactured of high-grade alloy steel. • Corrosion resistant finish.
• Case hardened plugs. • Stainless steel springs. • Maximum air pressure 300 psi.
• Protective collar ensures against accidental disconnect.
♦ Milton Brand
• For low pressure pneumatic lines primarily used for air.
Brass
COUPLER BODY
FEMALE PIPE THREAD
COUPLER BODY
MALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97350
97423 ♦ 97376
97343 ♦ 97341
97356 ♦ 97353
97357
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/4
1/4
3/8
3/8
1/4
1/4
3/8
1/2
2
2
2
2
2
1
1
1
97351
97424 ♦ 97352
97359
1/4
1/4
3/8
1/2
1/4
1/4
3/8
1/2
2
2
1
1
PART NO.
SIZE
BARB
QTY.
97392
97394
97398
1/4
3/8
3/8
1/4
1/4
3/8
2
2
2
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97380
97419 ♦
97389
97335 ♦
97388
97338 ♦
97368
97337 ♦
97346 ♦
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
2
2
1
1
1
1
1
1
2
97390
97431 ♦
1/4
1/4
1/4
1/4
PART NO.
SIZE
BARB
QTY.
97391
97393
97399
1/4
1/4
3/8
1/4
3/8
3/8
2
2
2
PART NO.
SIZE
FNPT
QTY.
97381
97407 ♦
97426 ♦
97397
97400
97358
1/4
1/4
3/8
3/8
3/8
1/2
1/4
1/4
1/4
1/4
3/8
1/2
2
2
2
2
2
1
COUPLER PLUG
MALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
97360
97409 ♦
97377
97349 ♦
97363
97372
1/4
1/4
1/4
3/8
3/8
1/2
1/4
1/4
3/8
1/4
3/8
1/2
2
2
2
2
2
2
PART NO.
SIZE
MNPT QTY.
97382
97408 ♦
97387
97425 ♦
97386
97369
97371
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/4
1/4
1/4
1/4
3/8
3/8
1/2
2
2
2
2
2
2
2
ARO DESIGN
COUPLER BODY
MALE PIPE THREAD
COUPLER BODY
FEMALE PIPE THREAD
COUPLER PLUG
FEMALE PIPE THREAD
2
2
COUPLER PLUG
MALE PIPE THREAD
COUPLER PLUG
FEMALE PIPE THREAD
COUPLER PLUG
LOCK-ON HOSE BARB
COUPLER BODY
LOCK-ON HOSE BARB
COUPLER BODY
MALE PIPE THREAD
COUPLER BODY
FEMALE PIPE THREAD
INDUSTRIAL DESIGN
PART NO.
SIZE
MNPT QTY.
97361
97410 ♦
97342
97344 ♦
97362
97420 ♦
97375
97370
97345 ♦
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
3/8
1/4
3/8
1/2
1/2
2
2
2
2
2
2
2
2
2
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97385
97406 ♦
1/4
1/4
1/4
1/4
2
2
97396
1/4
1/4
2
COUPLER PLUG
MALE PIPE THREAD
COUPLER PLUG
FEMALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
97383
1/4
1/4
2
PART NO.
SIZE
MNPT QTY.
97384
97348 ♦
1/4
1/4
1/4
1/4
2
2
LINCOLN DESIGN
COUPLER BODY
FEMALE PIPE THREAD
COUPLER BODY
MALE PIPE THREAD
COUPLER PLUG
FEMALE PIPE THREAD
COUPLER PLUG
MALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97355
1/4
1/4
1
97354
1/4
1/4
97365
1/4
1/4
2
97364
1/4
1/4
M4
CALL
1-800-558-2808 /
FAX
1
1-800-553-8769 /
2
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
SHOP AIR HOSE
P N E U M AT I C Q U I C K C O N N E C T C O U P L E R S & P L U G S
SAFETY COUPLERS
INDUSTRIAL SERIES 310
• Push button safety coupler.
• Double click to engage properly. First click locks coupler
and plug. The second click engages the air pressure. To
disconnect, push button twice.
• First push relieves the air pressure. The second push allows
the coupler to be disconnected.
• Maximum temperature: -60 deg F to 140 deg F
• Air flow: 36 SCFM @ 90 psi
HEAVY-DUTY QUICK DISCONNECT COUPLERS
• Offers a higher flow capacity compared to standard quick couplers.
• Flow Capacity: 32.6 CFM • Material: brass/steel.
• Plating: Nickel • Maximum Working Pressure: 232 psi (16 bar)
• Minimum Burst Pressure: 2030 psi (140 bar)
• Male threaded couplers come with pre-applied thread sealant.
• Industrial style interchange. Use with standard industrial design plugs.
COUPLER BODY
FEMALE PIPE THREAD
COUPLER BODY
MALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97437
97438
97439
1/4
1/4
1/4
1/4
3/8
1/2
1
1
1
97434
97435
1/4
1/4
1/4
3/8
1
1
HIGH FLOW SERIES 320
HEAVY-DUTY QUICK DISCONNECT COUPLERS
• High flow design. • Flow Capacity: 74.3 CFM • Material: brass/steel.
• Plating: Nickel Maximum Working Pressure: 232 psi (16 bar)
• Minimum Burst Pressure: 2030 psi (140 bar)
• Male threads come with preapplied thread sealant.
• Not interchangeable with any other system or design of couplers.
COUPLER BODY
FEMALE PIPE THREAD
COUPLER BODY
MALE PIPE THREAD
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97737
97738
97739
1/4
1/4
1/4
1/4
3/8
1/2
1
1
1
97735
97736
1/4
1/4
3/8
1/2
1
1
COUPLER PLUG
MALE PIPE THREAD
PART NO.
SIZE
FNPT
QTY.
PART NO.
SIZE
MNPT QTY.
97743
1/4
1/4
1
97740
97741
97742
1/4
1/4
1/4
1/4
3/8
1/2
MANIFOLD COUPLING
• Increases number of air outlets
without adding more air lines.
PART NO.
NPT
QTY.
97366
97367
1/4 x 1/4
3/8 x 1/4
2
2
STYLE
SIZE
PIPE THREAD
MAX
PRESSURE
QTY.
97417
97418
97315
Industrial
Industrial
Automotive
1/4
1/4
1/4
1/4 FNPT
1/4 MPT
1/4 FNPT
225 psi
225 psi
225 psi
1
1
1
SWING COUPLER
• Valve-free couplings provide a fast and easy
connection and guarantee free flow in a compact,
easy to manage design. A simple turn activates an air
vent to provide ventilation and safety to the hose.
• Free flow without any force required and with
negligible pressure loss in your system.
• Meet safety standard ISO 4414, EN 983.
• NBR standard seal.
• Temperature Range: Standard from -4° to 212° F
• Connection and Disconnection up to 200 psi.
• Use with Compressed air, gases, liquids and media
with low to medium viscosity.
PART NO.
STYLE
SIZE
FNPT
MAX
PRESSURE
QTY.
97311
Industrial
3/8
3/8
360 psi
2
5 IN 1 SAFETY COUPLER
PART NO.
COUPLER PLUG
FEMALE PIPE THREAD
PART NO.
1
1
1
• Accepts five of the most common 1/4" body interchanges:
Industrial, ARO, Automotive, Lincoln, and Euro.
• Safely bleeds off air pressure before
releasing connector.
• Automatic-style coupling makes connecting
hoses quick and easy.
PART NO.
BODY
STYLE
FEMALE
NPT
MAX
PRESSURE
QTY.
97336
1/4
1/4
150
1
UNIVERSAL PNEUMATIC BRASS COUPLER
• Fits the three most popular types: ARO 210, Tru-Flate and Industrial Interchange
• Features an automatic push-to-connect mechanism and a built-in sleeve guard to
protect from accidental discharge and damage to the sleeve.
• Constructed from corrosion resistant solid brass.
• Specifications:
» Temperature Range: -40° F to 250° F
» Locking Device: 4 Balls
» Vacuum Service: Not recommended
PART NO.
BODY
STYLE
FEMALE
NPT
MAX
PRESSURE
QTY.
97395
1/4
1/4
150 psi
2
CONNECT WITH IMPERIAL SUPPLIES
M5
SHOP SUPPLIES
SHOP AIR HOSE
P N E U M AT I C U N I V E R S A L C O U P L E R S
CHICAGO UNIVERSAL AIR COUPLER
• Universal air coupler with common head.
• Eliminates mismatched fitting and allows direct connection.
• Rubber seal and cotter pin included.
• Temperature Range: -20° F to 160° F
• Malleable iron.
PART NO.
DESCRIPTION
BODY
STYLE
MALE
NPT
MAX
PRESSURE
QTY.
97620
97622
97621
Universal Air Coupler
Universal Coupler Washer
Universal Coupler Safety Clip
3/4
—
—
3/4
—
—
110
—
—
1
50
25
P N E U M AT I C C O U P L E R C R O S S R E F E R E N C E C H A R T
SORT ORDER BY IMPERIAL PART NUMBER
IMPERIAL
AMFLO
ARO
FOSTER
HANSEN
LINCOLN
MILTON
SCHRADER
TRU-FLATE
PARKER
97311
97315
97341
97342
97350
97351
97352
97353
97354
97355
97357
97358
97359
97360
97361
97362
97363
97364
97365
97368
97369
97370
97371
97372
97376
97377
97380
97381
97382
97383
97384
97385
97386
97387
97388
97389
97390
97395
97400
97417
97418
97420
97426
C26
—
C26-22
CP25-02
C20
C21
C25
C26
C27
C28
C10
CP10
C9
CP20
CP21
CP25
CP26
CP27
CP28
C10-23
CP9-03
CP17
CP9
CP18
C20-23
CP20-23
C2
CP2
CPI
CP38
CP37
C38
CP5
CP7
C6
C8
C1
—
CP6
—
—
—
CP8
—
—
23103-002
23903-210
23102-200
23102-012
23103-013
23103-300
—
—
23104-400
—
23104-014
23902-200
23902-210
23903-310
23903-300
—
—
23104-3
23104-13
23904-410
—
23904-400
23102-003
23902-003
—
—
—
2609
2608
—
—
—
—
—
—
—
TFPF33-000
—
—
—
TFPF32-000
4404
—
4104
40-4
3003
3103
4304
4204
—
—
5205
—
5305
11-3
10-3
42-4
43-4
LN11
LN12
5005
5105
54-5
—
55-5
3203
15-3
TF3003
TF-11
TF-10
210-11
210-10
210-3003
TF42
TF40
—
—
TF10
—
—
—
—
—
—
440
—
400/ 4000
40
1000/ 3000
1100/ 3100
430/ 4300
420/ 4200
—
—
5200
—
5300
11
10
42
43
—
—
500
510
54
—
55
3200/ 1200
15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
642004
640104
612004
611004
641006
642006
—
815
865
—
651008
630204
630104
640106
640206
11659
11661
—
—
13314
—
13370
612006/ 632006
630206
—
—
—
13331
13329
862
—
—
—
—
—
—
5876
—
—
—
—
—
99787
1833
1839
715
716
1836
1835
—
790
1815
1818
1816
728
727
1837
1838
791
792
1813
1814
1857
1817
1858
718
732
785
784
783
778
777
775
1807
1809
1805
1803
786
745
1808
99705
99706
1855
1810
—
—
—
—
5138-12
5139-12
—
3541
—
3528
3512
3514
3511
5139-11
5138-11
38
3543
3531
3532
—
—
—
3513
—
5263-12
5263-11
3504
3507
3506
3530
3529
3526
3517
3519
3516
3521
3503
—
—
—
—
—
—
—
—
—
—
13-234
13-224
13-526
13-536
13-424
13-434
13-712
12-712
13-704
12-234
12-224
12-526
12-536
12-424
12-434
13-710
—
12-752
12-704
12-762
—
—
13-134/ 13-104
12-134/ 12-132
12-12M/ 12-122
12-334
12-324
13-334
12-604
12602
13-612
13-610
13-124/ 13-102
13-510/ 13-511
12-612
—
—
—
12-610
25
—
—
—
23
22
24
25
—
73
17
3F
16
H3C
H2C
H2E
H3E
L2C
L3C
17E
16E
H2F
—
H3F
23E
H3C-E
13
3C
—
—
—
—
—
—
—
—
—
—
3E
—
—
—
1E
M6
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
SHOP AIR HOSE
P N E U M AT I C C O U P L E R I D E N T I F I C AT I O N C H A R T
COUPLERS ARE SHOWN ACTUAL SIZE
STYLE
1/2"
3/8"
1/4"
INDUSTRIAL/
MILTON
AUTOMOTIVE/
TRU-FLATE/
PARKER
ARO
LINCOLN
SEE H36
Looking for more
barbed fittings?
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M7
SHOP SUPPLIES
SHOP AIR HOSE
BARBED FITTINGS
HOSE TO MALE PIPE
HOSE TO MALE PIPE
PART NO.
HOSE
I.D.
PIPE
THREAD
QTY.
PART NO.
HOSE
I.D.
PIPE
THREAD
QTY.
92102
92100
92101
92103
92104
92105
92108
92106
92107
92130
92109
92184
92185
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
1"
1/8
1/4
1/4
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
3/4
3/4
10
10
5
10
10
10
5
10
10
5
10
5
5
92178
92093
92179
92099
92099-4
1/4
5/16
3/8
1/2
1/2
1/8
1/4
1/4
1/4
1/4
5
5
5
5
100
HOSE TO FEMALE PIPE
HOSE MENDER
PART NO.
HOSE
I.D.
PIPE
THREAD
QTY.
92124
3/8
1/4
10
THREE BARB TEE SPLICER
PART NO.
HOSE
I.D.
PIPE
THREAD
QTY.
92128
92129
92110
92111
92112
92113
1/8
3/16
1/4
5/16
3/8
1/2
—
—
—
—
—
—
5
5
10
10
10
10
PART NO.
HOSE
I.D.
QTY.
92131
92186
92187
92188
3/8
1/2
5/8
3/4
5
5
5
5
BRASS FERRULES
CRIMPING TOOLS
BRASS FERRULES
STANDARD HOSE CRIMPER
• For use with hose barb fittings.
• Provides a production style crimp.
• Use with Standard Hose Crimper, Part No. 92059.
• Comes with five dies for crimping 1/4" braid
to 3/8" double-braided hose.
• Provides a production style crimp.
• Used to crimp brass ferrules.
PART NO.
FERRULE I.D.
QTY.
92125
92126
92127
92061
92062
92066
92063
92065
92067
92068
.525
.562
.593
.625
.656
.687
.718
.750
.825
.937
25
25
25
25
25
25
25
10
25
25
PART NO.
QTY.
92059
1
1/2" DIE FOR STANDARD CRIMPER
PART NO.
QTY.
92060
1
REUSABLE AIR HOSE FITTINGS
REUSABLE AIR HOSE FITTING
REUSABLE AIR HOSE FITTING SPLICE
• Use to repair damaged shop air hose.
• More durable hose connection than barbed fittings and hose clamps.
• Recommended for low pressure air hose applications.
• No crimping or skiving required.
• Easily repaired.
• Material: brass
• Use to repair damaged shop air hose.
• More durable hose connection than barbed fittings and hose clamps.
• Recommended for low pressure air hose applications.
• No crimping or skiving required.
• Easily repaired.
• Material: brass
PART NO.
HOSE
I.D.
HOSE
O.D.
MNPT
THREAD
MAX.
PSI
QTY.
97301
97302
97300
97303
1/4
3/8
3/8
1/2
5/8
3/4
5/8
15/16
1/4
1/4
1/4
1/2
250
250
250
250
5
5
5
2
M8
CALL
1-800-558-2808 /
FAX
PART NO.
HOSE
I.D.
HOSE
O.D.
MAX.
PSI
QTY.
97304
97306
97305
1/4
3/8
3/8
5/8
5/8
3/4
250
250
250
5
5
5
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
PNEUMATIC TOOLS
BLOW GUNS
TYPHOON® BLOW GUN
SAFETY BLOW GUN
• Meets or exceeds OSHA regulations.
• Variable flow trigger for controlled air release.
• Maximum flow for easy clean-up of even the
heaviest shavings and chips.
• Includes one high flow tip.
• Light-weight and ergonomic.
• Conforms with title 41 and OSHA standards.
• Chrome plated lever-type blow gun.
• Nozzle pressure reduced to 30 psi with inlet pressure of 150 psi.
• Safety tip has side ports for air exhaust if tip is plugged.
FEMALE
NPT
PART NO.
THRUST
CFM
72448
2.1 lb
34/125 psi 1/4
QTY.
PART NO.
DESCRIPTION
QTY.
72068
72052
72053
Blow Gun
Replacement Tip
Blow Gun, Permanent Tip
1
1
1
1
BLOW GUN WITH RUBBER TIP
• Made with a rubber tip, a plastic
body and a built-in hang-up hook.
• Maximum working pressure: 110 psi, SCFM 13 at 90 psi
• Equipped with 1/4" NPT brass air inlet.
• Adjustable air flow.
• Has a 4" extension.
TYPHOON FEMALE
THREADED NOZZLE TIP
• High flow tip.
• Must use with 24" extension, Part No. 72148.
PART NO.
DESCRIPTION
QTY.
72477
Female Threads
1
DESCRIPTION
QTY.
Male Threads
1
TYPHOON MULTI-JET TIP
• Designed for true heavy-duty
clean-up and blow-off.
• Tip comes with 2" extension.
• Use with Typhoon® Blow Gun, Part No. 72448
and the 24" Extension, Part No. 72418.
PART NO.
DESCRIPTION
THRUST
CFM
Multi-Jet Tip
3.1 lb
51/125 psi 1
QTY.
TYPHOON 24" EXTENSION
• Male threads on both ends of extension.
• Will NOT work with high flow tip sold with gun.
• May be used with Typhoon® Blow Gun, Part No. 72448
and Multi-Jet Nozzle, Part No. 72419.
QTY.
72418
1
TYPHOON EXTENSION COUPLER
• 1" coupler used with Typhoon 24" extension Part No. 72418.
• Use to attach nozzles 72417 and 72419.
PART NO.
QTY.
72500
1
PART NO.
INLET
QTY.
37322
1/4 NPT
1
BLOW GUN WITH STAINLESS NOZZLE
72419
PART NO.
QTY.
1
• Die cast aluminum body.
• Features venturi side ports that combine ambient air with
compressed air to create a much higher volume output.
• Variable speed trigger. • OSHA compliant
• Overall length: 5" • Tip diameter: 1/2"
• Maximum working pressure: 150 PSI
• Operating temperature: 14-158°F
• High flow tip.
• Use with Typhoon® Blow Gun, Part No. 72448.
PART NO.
INLET
1/4 NPT
BLOW GUN WITH 1/2" RUBBER TIP
TYPHOON MALE
THREADEDNOZZLE TIP
72417
PART NO.
72476
• Impact and weather resistant nylon body.
• Corrosion resistant stainless steel nozzle and components.
• Variable speed trigger. • OSHA compliant
• Extension length: 4-1/2"
• Maximum working pressure: 235 PSI
• Air consumption: 15.18 CFM @100 PSI.
• Operating temperature: 14-158°F
PART NO.
INLET
QTY.
79951
1/4 NPT
1
BLOW GUN WITH COILED HOSE
• Brass fittings for both ends of coil.
• Lever-type blow gun.
• Compression tee to splice into existing air line
• Electroplated, rust-resistant.
• Heavy-duty 1/4" OD.
• 11-1/2" hose.
PART NO.
QTY.
72415
1
Note: The air line is spliced into the line running to the drivers seat. Then
the blow gun can be used to blow out the interior of the cab.
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M9
SHOP SUPPLIES
PNEUMATIC TOOLS
P N E U M AT I C D I E G R I N D E R S
A I R VA C U U M S
SPEEDAIRE RIGHT ANGLE DIE GRINDER
• Pneumatic die grinder.
• Industrial Duty.
• Free Speed: 20,000 rpm
• Horsepower: 1/4
• Rear exhaust.
• Avg CFM at 15 Second Run Time: 3.5
• CFM at Full Load: 15.0
• Collet: 1/4
PART NO.
QTY.
72774
1
• Required Pressure: 90 psi
• Air Inlet NPT: 1/4"
• Minimum Hose Size: 3/8"
• Bearing Type: Ball
• Handle Material: Rubber.
• Length: 5-1/4".
• Right Angle Length: 3"
• Includes two collet wrenches.
AIR VACUUM
• Wet/dry vacuum replaces standard shop
vacuums at tire repair stations.
• Small, powerful, and versatile, quickly
removes rubber and dust particles from tires.
• Average air consumption: 3.36 CFM
• Air Inlet NPT: 1/4"
• Minimum Hose Size: 3/8"
PART NO.
QTY.
88866
1
LOW SPEED TIRE BUFFER
• Pneumatic low speed tire buffer.
• Use for buffing injury area or for recaps.
• Low speed prevents scorching of tires.
• Adjustable speed control.
• Quick-release chuck for fast and easy changing
of buffing wheel.
• Free Speed: 2,800 rpm
• Rear exhaust directs air away from the work area.
• Average CFM at 15 Second Run Time: 13
• CFM at full load: 26
• Required Pressure: 90 psi
• Air Inlet NPT: 1/4"
• Minimum Hose Size: 3/8"
• Length: 8-1/4"
P N E U M AT I C S A N D E R S
INGERSOLL-RAND AIR SANDER
• General duty dual action air sander.
• Pad Size: 6"
• Air Flow: 17 CFM
• Air Inlet: NPT 1/4"
• Average Air Flow: 4 CFM
• Free Speed: 12,000 rpm
• Required Pressure: 90 psi
• Minimum Hose Size: 3/8"
• Length: 10"
PART NO.
QTY.
PART NO.
QTY.
72488
1
88865
1
The Imperial Experts know
fleet maintenance products.
Watch our product videos on YouTube.
Scan QR code using your smart phone.
In your web browser enter: http://isuppli.es/imperial-experts
M10
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
PNEUMATIC TOOLS
AIR HAMMERS
HEAVY-DUTY AIR HAMMER
ROCKFORD® MEDIUM BARREL AIR HAMMER
• Has a built-in regulator for
precise speed control.
• Ideal for practically every
automotive repair job.
• Features a durable, lightweight nylon handle.
• Safety-lock style retainer.
• Sturdy all-metal body and handle.
PART NO.
SIZE
QTY.
PART NO.
QTY.
75780
.401 Shank
1
75779
1
BLOWS/
MINUTE
SHANK
OPENING
WEIGHT
LENGTH
BORE
DIAMETER
AIR
INLET
REC. AIR
PRESSURE
STROKE
LENGTH
BLOWS/
MINUTE
SHANK
OPENING
WEIGHT
LENGTH
BORE
DIAMETER
AIR
INLET
REC. AIR
PRESSURE
STROKE
LENGTH
2,600
0.401
3-1/4 lb
7-1/2
11/16
1/4
90 psi.
2-3/4
3,500
0.401
3-1/4 lb
7"
11/16
1/4
90 psi.
2-5/8
PERCUSSION TOOLS
AIR HAMMER SPECIALTY TOOLS
#75772, #75775, #75776
#75777, #75790
• These tools have a .401 shank.
• Use with Air Hammer, Part No. 75780.
PART NO.
DESCRIPTION
75772
Straight Punch
75775
5/16 Full Brazier Head Set
75776
5/16 Modified Brazier Head Set
75777
5/16 Universal Head Set
75790
1/4 Semi-tubular Rivet Tool
75773
Tapered Punch
75774
Valve Guide Driver
75788
Rivet Cutter
75789
Panel Cutter
75792
Punch, Tapered
75791
Chisel, 3/4 Blade Flat
75793
Smoothing Hammer
75768 ♦
Spring Retainer
75781
Retainer Chuck
75795
Chisel, Muffler Cutter
75796
Chisel, Claw Ripper
75797
Chisel, Bushing Splitter
75798
Chisel, Wide and Scrapper
75799
Chisel, V/Spot Weld Breaker
♦ Use with #75779
LENGTH
QTY.
6-1/2"
3-1/2"
3-1/2"
3-1/2"
3-3/8"
6-1/2"
7-1/2"
5-3/4"
6"
6-1/2"
6-1/2"
3-1/4"
—
—
7-1/2"
5-3/8"
6-1/4"
6-1/4"
6-1/4"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
#75773
#75774
#75788
#75789
#75792
#75791
#75796
#75793
#75768
#75781
SEE PAGE K11-K19
#75795
#75798
Eye Protection
#75797
#75799
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M11
SHOP SUPPLIES
PNEUMATIC SYSTEM COMPONENTS
A I R R E G U L AT O R S
AIR REGULATOR
PNEUMATIC REGULATOR
• Tamper proof fixed pressure setting. Preset at the factory.
• Can be installed with safety in mind.
• Regulator inlet rating 400 PSI.
• Unit only delivers line pressure.
• Delivery pressure is a function of flow.
• Can be restricted for low flow requirements.
• Easy to install. No brackets or special tools required.
• Anodized for corrosion protection, also color coded.
• High strength aluminum alloy.
• Regulator will function in any position.
• PSI: 40 lb
• Two full-flow gauge ports.
• Maximum flow: 45 cfm
• Maximum pressure: 300 psi
• Maximum temperature: 150° F
• Adjustment range: 5 - 150 psi
• Height: 4.19"
• Width: 1.97"
PART NO.
NPT
QTY.
75766
1/4
1
PART NO.
NPT
QTY.
PANEL MOUNT NUT
75769
1/4
1
• Use on compact regulator Part No. 75766.
PART NO.
QTY.
75767
1
A I R P R E S S U R E P O P O F F VA LV E
AIR PRESSURE POP OFF VALVE FOR PNEUMATIC TOOLS
• Bleeds off compressed air in excess of 90 psi to protect pneumatic tools.
• Air Outlet: 1/4" NPTM thread
• Air Inlet: 1/4" NPTF
• Case hardened head for extra durability.
• Ball check in the head prevents dirt and grit.
• Heavier wall thickness for extra strength.
• Stress relieved and tempered carbon steel spring.
• Individually inspected and batch tested at 5,000 psi.
• Thread rolled taper threads.
• Unique riveting process fully locks in the spring.
• Meets specifications as per SAE J-534.
PART NO.
QTY.
72612
1
SEE M36-M37
Grease Guns
VEHICLE LIFTING TOOLS
BOTTLE JACKS
BOTTLE JACKS
• Industrial bottle jack.
• Steel construction.
• Finish: Air dry enamel
• Meets standards - ANSI/PALD/CE.
PART NO.
WEIGHT
LOAD
MIN.
LIFTING
HEIGHT
MAX.
LIFTING
HEIGHT
HYDRAULIC
STROKE
BASE
SIZE
HANDLE
LENGTH
QTY.
73884
73886
73887
73888
73889
2 ton
6 ton
8 ton
12 ton
20 ton
6.89"
8.27"
8.66"
9.45"
9.84"
13.39"
16.54"
17.32"
18.77"
19.09"
3.74"
5.12"
5.51"
6.1"
6.1"
4.02" x 3.78"
4.72" x 4.49"
4.92" x 4.69"
5.31" x 5.12"
6.10" x 5.71"
16.25
25.5
25.5
25.5
28.5
1
1
1
1
1
M12
CALL
1-800-558-2808 /
FAX
#73884
#73886
1-800-553-8769 /
#73887
#73888, #73889
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
GENERAL WASHING
WA S H H O S E
COMMERCIAL DUTY WASH RACK HOSE
• A rugged professional quality hose for fleet owners, garages and other
users who require the absolute highest quality.
• Tough EPDM tube and cover provide maximum abrasion resistance.
• Double-braided reinforcement with free flow inner core.
• Heavy-duty solid brass couplings with octagonal female swivels.
• Good low temperature flexibility.
• Maximum Water Temperature: 160° F
PART NO.
I.D.
O.D.
COLOR
MIN. BEND
RADIUS
WORKING
PRESSURE
MIN. BURST
PRESSURE
QTY.
FEET
95959
3/4
1-5/32
Black
4.5"
150 psi
600 psi
50
HEAVY-DUTY RUBBER WASH HOSE
• Double spiral reinforcement.
• Spun brass couplings on each end.
• Ribbed abrasion resistant cover.
PART NO.
I.D.
O.D.
COLOR
MIN. BEND
RADIUS
WORKING
PRESSURE
MIN. BURST
PRESSURE
QTY.
FEET
95956
5/8
0.94
Black
3.75"
150 psi
300 psi
50
WA S H H O S E E N D S
S P R AY N O Z Z L E S
HEAVY-DUTY UTILITY AND GARDEN HOSE FITTINGS
METAL TRIGGER WASH NOZZLE
• Designed to be used with standard hose clamps.
• All female swivel fittings are shipped assembled with a washer.
• Adjustable spray pattern.
• Easy on/off control of handle.
HOSE
I.D.
PIPE
THREAD
QTY.
PART NO.
GARDEN
THREAD
QTY.
92500
Male Garden
92501
Hose Fitting
92502
92503
Female Garden Hose
92504
Fitting
92505
1/2
5/8
3/4
1/2
5/8
3/4
—
—
—
—
—
—
2
2
2
2
2
2
92521
3/4"
1
Male Hose To Male
Hose
92506
—
—
2
Male Hose To Male
Pipe
92507
92508
92509
—
—
—
3/8
1/2
3/4
5
5
5
Replacement
Gasket/Washer
92510
—
—
10
92511
—
1/2
2
92512
—
3/4
2
92513
—
3/4
2
92515
92516
92517
92518
92526
92527
92528
92529
1/2
5/8
3/4
3/4
1"
1-1/4
1-1/2
2"
—
—
—
—
—
—
—
—
5
5
5
1
1
1
1
1
STYLE
Female Hose x
Female Pipe
Female Hose x
Female Hose
Hose Mender
Galvanized
Hose Mender
PART NO.
BRASS TWIST SPRAY NOZZLE
• Made of rust resistant solid rod brass, 3-1/4" long.
• Fully adjustable flow rate from fine mist to full stream.
• Positive shut-off.
PART NO.
GARDEN
THREAD
QTY.
92520
3/4"
1
WATER NOZZLE
• Bend the nozzle to activate the water flow,
release it and the water stops.
• Helps conserve water while washing vehicles,
filling radiators or watering lawns.
• Easy one hand operation.
PART NO.
GARDEN
THREAD
QTY.
92519
3/4"
1
SEE PAGE M53-M65
Vehicle Cleaning & Appearance
CONNECT WITH IMPERIAL SUPPLIES
M13
SHOP SUPPLIES
PRESSURE WASHING
P R E S S U R E WA S H H O S E
HIGH PRESSURE BLUE WASH HOSE ASSEMBLY
WITH FACTORY CRIMPED COUPLINGS
• Specifically designed for high pressure, hot water spraying.
• Resistant to the normal damaging properties of hot water.
• Smaller inside/outside diameter ratios, makes hose lighter and more
flexible than standard wire braid hoses.
• Blue cover contains no carbon black and will not mar the finish of vehicles.
• Best choice for pressure wash applications.
• Factory crimped couplings.
• 3/8" NPT Swivel x 3/8" Rigid Pipe
• Maximum Water Temperature: 275° F
PART NO.
I.D.
O.D.
COLOR
MIN. BEND
RADIUS
WORKING
PRESSURE
MIN. BURST
PRESSURE
QTY.
FEET
93525
93526
3/8
3/8
.650
.650
Blue
Blue
2-1/2
2-1/2
3000 psi
3000 psi
12,000 psi
12,000 psi
50
100
LANCES
DUAL LANCE
• Light-weight stainless steel lance with nozzle guard.
• Side handle/Valve actuator.
• Viton® Seal.
• Maximum Water Temperature: 200° F
PART NO.
GRIPS
LENGTH
CONNECTOR ENDS
MAX PSI
QTY.
93805
Double
36"
1/4 MPT x 1/4 FPT
4,000
1
INSULATED LANCE WITH GRIP
• Zinc-plated high pressure tubing.
• Round daisy grip.
• Better heat dispersion.
• Reduced weight.
• Maximum Water Temperature: 300° F
SEE PAGE M53-M65
PART NO.
GRIPS
LENGTH
CONNECTOR ENDS
MAX PSI
QTY.
93810
93811
93813
Single
Double
Triple
36"
48"
79"
1/4 MPT x 1/4 MPT
1/4 MPT x 1/4 MPT
1/4 MPT x 1/4 MPT
5,250
5,250
5,250
1
1
1
Vehicle Cleaning & Appearance
PIVOT NOZZLE LANCE
• Professional grade tool designed for
dependability and durability.
• Stainless steel shaft.
• Fits 1/4" power wash guns.
• Twist grip control allows the user to pivot the nozzle
90° to direct the spray where you need it.
• Non-slip grip for less fatigue and more control.
S P R AY G U N S & H A N D L E S
PRESSURE WASHER
TRIGGER GUN
PART NO.
GRIPS
LENGTH
CONNECTOR ENDS
MAX PSI
QTY.
93812
Double
40"
1/4 MPT
4,000
1
LANCE ACCESSORIES
• Stainless steel outlet.
• Gallons Per Minute: 10
• Maximum Water Temperature: 300° F
PART NO.
CONNECTOR ENDS
MAX
PSI
QTY.
93801
3/8 FPT x 1/4 FPT
5,000
1
LANCE NOZZLE PROTECTOR
• Size: 1-1/2" flared end
• Slip fits standard lances.
• Use on all 1/4" dual lances.
LANCE HANDLE
• Use on all 1/4" lances.
• Easily positioned without removal of nozzle.
PART NO.
QTY.
PART NO.
QTY.
93814
1
93815
1
M14
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
PRESSURE WASHING
COUPLERS & SWIVELS
COUPLER BODY
QUICK CONNECT GENERAL
SPRAY NOZZLE
• Material: Stainless Steel
• Use couplings to attach
male spray nozzles to lances.
• Material: Hardened stainless steel
• Fits most 1/4" quick couplers.
• Max PSI: 4,000
PART
NO.
DESCRIPTION
MAX
PSI
QTY.
93829
93844
1/4 x 1/8
1/4
3,000
3,000
1
1
QUICK COUPLER BODY
• Material: Stainless Steel
PART
NO.
DESCRIPTION
MAX
PSI
QTY.
93830
93831
93832
93833
1/4 FPT
1/4 MPT
3/8 FPT
3/8 MPT
6,700
6,700
5,500
5,500
1
1
1
1
QUICK COUPLER NIPPLE
• Material: Stainless Steel
PART
NO.
DESCRIPTION
MAX
PSI
QTY.
93834
93835
93836
93837
1/4 FPT
1/4 MPT
3/8 FPT
3/8 MPT
6,700
6,700
6,700
6,700
1
1
1
1
97468
97469
1/2 MPT
1/2 FPT
MAX
PSI
ORIFICE
NOZZLE
DEGREE
COLOR
QTY.
PART
NO.
ORIFICE
NOZZLE
DEGREE
COLOR
QTY.
93942
93941
93913
93914
93915
93916
93917
93918
93919
93920
93921
93922
93923
93924
93925
5.5
4.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
0°
15°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
Red
Yellow
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
93926
93927
93928
93929
93930
93931
93932
93933
93934
93935
93936
93937
93938
93939
93940
10.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
25°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
Green
White
White
White
White
White
White
White
White
White
White
White
White
White
White
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
• Use Reducing Coupler, Part No. 93829,
to attach nozzles to the lance.
• Orifice is recessed for protection.
• Max PSI: 4,000
• Safety sleeve lock guards against accidental disconnection.
• Smooth bore "straight through" design for high flow.
• Heavy duty back-up ring to prevent O-ring extrusion.
• FD69 Series "Arc Latch" ™
• Body material: Zinc plated steel.
• Standard seal material: Buna-N.
DESCRIPTION
PART
NO.
SPRAY NOZZLE
QUICK COUPLER NIPPLE
PART
NO.
S P R AY N O Z Z L E S
QTY.
1
1
HIGH PRESSURE SWIVEL
• Material: Stainless Steel
• Max Temperature: 320° F
• Live swivel at full pressure.
• Resistant to harsh chemicals.
PART
NO.
DESCRIPTION
MAX
PSI
MAX
FLOW
QTY.
93838
93839
1/4 MPT x 1/4 FPT
3/8 MPT x 3/8 FPT
5,600
5,600
10.5 GPM
10.5 GPM
1
1
PART
NO.
MPT
ORIFICE
NOZZLE
DEGREE
QTY.
93816
93817
93818
93819
93820
93821
93822
93823
93824
93825
93826
94158
94159
94160
94161
94162
94163
94164
94165
94166
94167
94168
94169
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
2.0
4.0
5.0
2.0
4.0
5.0
2.0
4.0
5.0
8.0
8.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
0°
0°
0°
15°
15°
15°
25°
25°
25°
25°
40°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
25°
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PART
NO.
MPT
ORIFICE
NOZZLE
DEGREE
QTY.
94170
94171
94172
94173
94174
94175
94176
94177
94178
94179
94180
94181
94182
94183
94184
94185
94186
94187
94188
94197
94198
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
8.0
8.5
9.0
10.0
2.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
30.0
40.0
25°
25°
25°
25°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
40°
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BALL BEARING SWIVEL
• Material: Stainless Steel
• Max Temperature: 180° F
• Nitrile Buna seals.
• Ball bearing design ensures free swivel action under pressure.
PART
NO.
DESCRIPTION
MAX
PSI
MAX
FLOW
QTY.
93840
93841
93842
1/4 MPT x 1/4 NPT
3/8 MPT x 3/8 NPT
1/2 MPT x 1/2 NPT
3,500
3,500
3,500
6.8 GPM
10.6 GPM
27.0 GPM
1
1
1
SOAP SPRAY NOZZLE
• Material: Brass
• Fits most 1/4" quick couplers.
• Ideal for low pressure chemical applications.
• Max Pressure: 4,000 psi.
PART
NO.
ORIFICE
NOZZLE
DEGREE
COLOR
QTY.
93843
40
65°
Black
1
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M15
SHOP SUPPLIES
EXTENSION CORDS
EXTENSION CORDS
IMPERIAL® HEAVY-DUTY ALL-WEATHER
EXTENSION CORDS
YELLOW JACKET® POWER CORDS
• Durability, weather resistance and flexibility at -58° F to 140° F.
• Three times the abrasion resistance of rubber cords.
• 30-50% more flexible than regular cords.
• PowerLite™ indicator plug glows when cord has power.
• Extra heavy, clear molded plugs are rugged and durable.
• SJTW-A yellow, OSHA approved.
• All-weather cord with blue rubber-like jacket for
increased flexibility in cold weather.
• Female outlet lights up with power to cord.
• Temperature rating: -58° F to 167° F
• Three conductors with grounded plug.
PART
NO.
WIRE
SIZE
AMPS
WATTS
CORD
DIA.
LENGTH
QTY.
73904
73905
73906
73907
14/3
14/3
12/3
12/3
13
13
15
15
1,625
1,625
1,875
1,875
.315
.315
.410
.410
25'
50'
25'
50'
1
1
1
1
PART
NO.
WIRE
SIZE
AMPS
WATTS
VOLTS
LENGTH
QTY.
71642
71643
12/3
12/3
15
15
1,875
1,875
125
125
25'
50'
1
1
YELLOW JACKET® LOCK-JAW LOCKING PLUG
• Locking plug keeps tools and cords plugged in.
• Meets or exceeds NEC, ASTM, ANSI/UL,
CSA and NOM specifications.
• Works with two and three-conductor tools.
• Full lifetime guarantee.
IMPERIAL® HEAVY-DUTY ALL-WEATHER
EXTENSION CORDS
• Outer jacket resists deterioration from moisture,
abrasion and extended exposure to sunlight.
• Designed for use in cold environments, stays flexible to -58° F.
• Meets all OSHA requirements. SJTW-A blue UL listed.
• Volts: 125, Color: Blue
PART
NO.
WIRE
SIZE
AMPS
WATTS
CORD
DIA.
LENGTH
QTY.
71099
73794
73792
16/3
16/3
14/3
13
13
13
1,625
1,625
1,625
.310
.310
.390
15'
25'
100'
1
1
1
PART
NO.
WIRE
SIZE
AMPS
WATTS
VOLTS
LENGTH
QTY.
71137
71138
12/3
12/3
15
15
1,875
1,875
125
125
50'
100'
1
1
HEAVY-DUTY TRIPLE TAP
RETRACTABLE METAL REEL
• Polarized plug with three 10 amp grounded receptacles.
• Includes wall and ceiling mounting bracket.
• LED power status light.
PART
NO.
WIRE
GAUGE
CORD
LENGTH
AMP
NO.
TAPS
QTY.
81730
16/3
30'
10
3
1
IMPERIAL® OUTDOOR EXTENSION CORDS
• Solid molded plugs.
• Won't mark floors or walls.
• Meets all OSHA requirements. SJTW-A orange UL listed.
• Volts: 125, Color: Orange
PART
NO.
WIRE
SIZE
AMPS
73797
73796
73795
16/3
16/3
16/3
13
13
13
PROFESSIONAL MULTI TAP
RETRACTABLE PLASTIC REEL
WATTS
CORD
DIA.
LENGTH
QTY.
1,625
1,625
1,625
.310
.310
.310
15'
25'
50'
1
1
1
• Polarized plug with multiple
grounded receptacles.
• Includes wall and ceiling mounting bracket.
• LED power status light.
PART
NO.
WIRE
GAUGE
CORD
LENGTH
AMP
NO.
TAPS
QTY.
81731
81732
14/3
12/3
50'
50'
13
15
3
4
1
1
IMPERIAL® HEAVY-DUTY EXTENSION CORDS
THREE OUTLET POWER CENTER
• Meets all OSHA requirements. SJTW-A orange UL listed.
• Volts: 125, Color: Orange
• Molded, three outlet plug.
• Reduces clutter of running multiple cords.
• Meets all OSHA requirements.
• SJTW-A orange UL listed.
• Volts: 125, Color: Orange
PART
NO.
WIRE
SIZE
AMPS
WATTS
CORD
DIA.
LENGTH
QTY.
71676
71677
14/3
14/3
15
15
1,875
1,875
.390
.390
25'
50'
1
1
M16
CALL
1-800-558-2808 /
FAX
PART
NO.
WIRE
SIZE
AMPS
WATTS
CORD
DIA.
LENGTH
QTY.
73799
14/3
13
1,625
.390
100'
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
EXTENSION CORDS
EXTENSION CORDS ACCESSORIES
HOSPITAL GRADE PLUG AND CONNECTOR
YELLOW JACKET® WITH GROUND FAULT
CIRCUIT INTERRUPTERS (GFCI)
• High strength polycarbonate face and body.
• Solid brass plug blades firmly embedded into body.
• Verified by UL to latest federal specifications.
• Plug and connector terminals separated by
insulating barriers, captive, speed-screw assembly.
• UL File 15012 AXUT plugs CSA approved 2081.
PART NO.
TYPE
QTY.
71686
71687
Male
Female
1
1
• Right angle male plug and circuit interrupter.
• Provides maximum safety against dangerous ground faults.
• PowerLite™ female plug glows when the cord has power.
• Meets or exceeds NEC, ASTM, ANSI/UL,
CSA and NOM specifications.
• Full lifetime guarantee.
#71686
#71687
SPECIFICATION GRADE PLUG AND CONNECTOR
TYPE
AMP
VOLTS
QTY.
81692
81693
Male
Female
15
15
125
125
1
1
#81693
#81692
TYPE
AMP
VOLTS
QTY.
Male
Female
15
15
125
125
1
1
VOLTS
AMP
WATT
QTY.
71093
12/3
2' w/GFCI
125
15
1,875
1
• Outlets: 5
• Transformer Outlets: 4
• On/Off power and 15A circuit breaker switch.
• One year manufacturer's warranty.
• UL and cUL listed
• Note: This product has no surge suppression and
will not protect against power surges.
PART NO.
CORD LENGTH
QTY.
71098
4'
1
• Multiple outlet adapter converts a single
outlet into three grounded outlets.
• High impact-resistant thermoplastic housings with easy-grip grooves.
• Solid brass plug blades are firmly embedded in body.
• Assembly screws are speed-threaded and captive, reducing installation time.
• See-through terminal cover allows
inspections of connections.
• NEMA 5-15.
PART NO.
CORD
LENGTH
CUBE ADAPTER – 3 WIRE
INDUSTRIAL GRADE PLUG AND CONNECTOR
81690
81691
WIRE
SIZE
FIVE OUTLET POWER ADAPTER
• Terminal screw clamps are designed to contain wire
and prevent binding.
• Solid brass plug blades are firmly embedded in body.
• Terminals in individual chambers to positively
insulate conductors.
• UL listed.
• NEMA 5-15.
PART NO.
PART
NO.
PART NO.
QTY.
71713
2
120 VOLT CORD COVER
• Replacement cover for extensions cord ends.
#81690
#81691
PART NO.
VOLTS
QTY.
82410
120
1
LIGHTING
S P E C I A LT Y B U L B S
QUARTZ HALOGEN BULBS
CERAMIC METAL HALIDE HID BULB
• Double ended style.
• Average lamp life is 2000 hours.
• Produces brighter, more vibrant light when
compared with standard incandescent bulb.
• Ceramic metal halide HID bulb.
• Double ended style.
• Lamp life: 15,000 hours.
PART NO.
CROSS REF.
WATTS
VOLTS
LENGTH
DIA.
QTY.
84700
84701
84703
T3RSC
T3RSC
T3R7S
300
500
500
120
120
240
4.63"
4.63"
4.69"
.50
.50
.50
12
12
1
PART NO.
CROSS REF.
WATTS
BASE
LENGTH
SHAPE
QTY.
84705
CHM150
150
RX7
5.37"
T7
1
HID HIGH INTENSITY DISCHARGE BULB
REDHEAD LED EXIT SIGN LAMP – RED
• Meets 2012 lighting
legislation energy standards.
• Lamp Type: Metal Halide
• Candelabra base with adapters for bayonet and intermediate base Exit fixtures.
• Recommended for use in High Lite, Lithonia, Mule and Pathway Exit Fixtures.
• For use with exit legend not exceeding 6" in height.
• 40 diodes, 120 volt, 2.81 watts, .024 amps.
• Lamp life: 25 years
PART NO.
CROSS REF.
WATTS
LENGTH
SHAPE
QTY.
82139
MVR1000/U
MVR1000/U/
M4/W/BT37
1000
15.375"
BT56
1
1000
11.5"
BT37
1
82143
PART NO.
QTY.
84702
2
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M17
SHOP SUPPLIES
LIGHTING
TROUBLE LIGHTS
YELLOW JACKET® WORK LIGHT
IMPERIAL® TROUBLE LIGHT
• Coated wrap-around wire cage keeps the
hot reflector from skin or upholstery.
• Heat-resistant bulb collar.
• Grounded metal guard.
• 13 amp grounded receptacle in handle.
• Patented dual hook system.
• 13A/125V rating UL Listed.
• Grounded metal cage.
• Built-in switch and outlet.
• Cord is SJTW-A, UL approved.
PART NO.
LENGTH
WIRE GAUGE
QTY.
71091
25'
16/3 SJTW-A
1
PART NO.
LENGTH
WIRE
OUTLET
SWITCH
QTY.
71675
50'
16/3
Yes
Yes
1
TROUBLE LIGHT
• Grounded metal cage.
• Built-in switch and outlet.
• Cord is SJTW-A, UL approved.
PART NO.
LENGTH
WIRE
OUTLET
SWITCH
QTY.
71674
25'
16/3
Yes
Yes
1
12V TROUBLE LIGHT WITH CLIPS
• Heavy duty handle with switch.
• Use 50 watt rough service bulb, Part No. 81919
• 4.2 amp draw.
PART NO.
LENGTH
WIRE GAUGE
71091
71634
20'
18/2
Plastic Guard for Light
TROUBLE LIGHT
• No switch or receptacle.
• Unpainted metal guard.
QTY.
1
1
PART NO.
LENGTH
WIRE
OUTLET
SWITCH
QTY.
71672 71673 25'
50'
16/3
16/3
No
No
No
No
1
1
OSHA 1910.399 compliant.
TROUBLE LIGHT
REPLACEMENT PARTS
INCANDESCENT TROUBLE LIGHT REEL
• Heavy duty metal retractable reel with flame retardant handle.
• Switch and 10 amp plug in handle.
• Galvanized metal lamp shield with hang hook.
• Use up to 75 watt incandescent bulb.
• For use with most trouble lights.
• Use maximum 75 watt light bulb
with replacement handle.
PART NO.
DESCRIPTION
QTY.
71690
81618
Metal Guard
Replacement Handle
2
2
PART NO.
LENGTH
WIRE GAUGE
QTY.
81698
40'
16/3 SJT
1
CORDLESS RECHARGEABLE SPOTLIGHT
4-IN-1 WORK LIGHT
• Cordless rechargeable handheld spotlight.
• 55 watt quartz halogen bulb for maximum
beam power and distance.
• Built-in overcharge protection prevents 110 volt
charger from damaging the battery.
• 6 volt; 4 amp battery.
• Charge or operate from any 12 volt power
source using the 12 volt charging cord.
• 1,000,000 candle power.
• Includes spring clamp, magnetic base,
reflector head and guard head.
• Base allows 360° swivel.
PART NO.
DESCRIPTION
QTY.
81113
81606
84438
Cordless Spotlight
Replacement Bulb
Replacement Battery
1
1
1
M18
CALL
1-800-558-2808 /
PART NO.
LENGTH
WIRE GAUGE
QTY.
81640
18'
18/2 SJTW
1
CLAMP LIGHT
• 8-1/2" clamp light with aluminum reflector.
• Spring steel clamp with scratch resistant vinyl sleeve.
• Adjustable ball joint for easy positioning.
• Rated up to 150 watt incandescent
(bulb not included).
• Wire Gauge: 18/2
FAX
PART NO.
LENGTH
WIRE GAUGE
QTY.
71635
6'
18/2 SPT-2
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LIGHTING
REPLACEMENT BULBS
SAFETY-COATED LIGHT BULBS
SAFETY COATED CFL BULB
• Identical to rough service/heavy-duty construction.
• Durable plastic coating for additional protection:
» Resists moisture and oil
» Withstands outdoor weather extremes
» Prevents loose glass hazards
• Designed for safety and performance,
recommended for trouble lights.
• Compact fluorescent light bulb (CFL) with safety
coating for additional protection.
• Prevents glass hazard when broken.
• Color Temp 2700 K
• Base: Medium Screw (E26)
• Average Life: 12,000 hours
PART NO.
WATTS
VOLTS
LUMEN
QTY.
82005
81616
81617
60
75
100
130
120
120
663
1140
12
12
12
PART NO.
WATTS
VOLTS
LUMEN
QTY.
82160
82161
82162
13
18
23
120
120
120
925
1,300
1,650
2
2
2
ROUGH SERVICE LIGHT BULBS
COMPACT FLORESCENT BULBS
• Full-power, high lumen output.
• Special seven support filament.
• Withstands vibration, resists shock.
• Withstands variable current and power surges.
• Outperforms all other rough service bulb.
• Energy star bulb.
• Color Temp 2700 K
• Base: Medium Screw (E26)
• Average Life: 10,000 hours
FROSTED
PART NO.
WATTS
VOLTS
81919
81620
81910
81621
82166
81622
50
50
60
75
75
100
12
120
120
120
120
120
LUMEN
360
663
990
1140
QTY.
6
12
12
12
12
12
PART NO.
WATTS
VOLTS
LUMEN
QTY.
81990
81991
81992
13
19
23
120
120
120
900
1,200
1,600
2
2
2
ROUGH SERVICE
APPLIANCE LIGHT BULB
• Withstands vibration, resists shock.
• Withstands variable current and power surges.
LUMENS
ELECTRICAL POWER CONSUMPTION
INCANDESCENT
CFL
450
40 Watts
9–13 Watts
800
60 Watts
13–15 Watts
1,100
75 Watts
18–25 Watts
PART NO.
WATTS
STYLE
QTY.
1,600
100 Watts
23–30 Watts
81909
60
Clear
12
2,600
150 Watts
30–52 Watts
REPLACEMENT FLUORESCENT BULBS
FLUORESCENT REPLACEMENT BULB
IMPERIAL
PART NO.
TRADE NO. WATTS
SIZE
QTY.
81948
81949-3
81674
81614
81614-4
F6T5CW
F8T5/CW
F13T5CW
F15T8/CW
F15T8/CW
9"
12"
20"
18"
18"
1
2
2
1
25
6
8
13
15
15
COMPACT FLUORESCENT LAMP
IMPERIAL
PART NO.
TRADE NO.
LIFE
HOURS
QTY.
81639
81641 81631
PL-L24W/41
PL-L24W/41
PLS-13
12,000
12,000
10,000
1
1
1
Long version
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M19
SHOP SUPPLIES
LIGHTING
REEL STYLE CORDED WORK LIGHTS
FLUORESCENT WORK LIGHT REEL
FLUORESCENT REEL DROP LITE
• Functions as a work light or a spot light.
• Heavy duty metal retractable reel.
• Clear chemical resistant lamp protector.
• Push on/off switch.
• 10 amp grounded receptacle in handle.
• Wire Gauge: 16/3 SJT
• Reel casing made from high impact,
fire resistant plastic.
• Compact design with a 50 foot reel.
• Wall mounted ballast.
• Hangs both vertically and horizontally.
• 60 watts of light from 13 watt bulb.
• Wire Gauge: 18/2
PART NO.
DESCRIPTION
QTY.
81696
81631
81696-1
81818
Light with 40' Cord
Replacement Bulb
Replacement Lens
Replacement Head
1
1
1
1
PART NO.
DESCRIPTION
QTY.
81631
81630-1
Replacement Bulb
Replacement Lens
1
1
FLUORESCENT WORK LIGHT REEL
• Stubby® Reel with switch and in-line ballast.
• Spring steel hook slides up and down the outer
tube and rotates for hands free lighting.
• Light source: (1) 13 watt rough service bulb
• Cord length: 40 feet
• Wire gauge: 18/3
• Cord jacketing: SJTOW-A
PART NO.
DESCRIPTION
QTY.
84440
84441
84440-1
Light with 40' Cord
Light with 50' Cord
Replacement Head
1
1
1
FLUORESCENT WORK LIGHT REEL
• Features dual integrated swivel hooks and
removable magnet for hands free use.
• Integrated 13 amp circuit breaker.
• Built in single grounded 12 amp outlet.
• Light source: (2) 13 watt bulbs
• Cord length: 50 feet
• Wire gauge: 14/3
• Cord jacketing: SJTW
• Housing material: Polyethylene
PART NO.
DESCRIPTION
QTY.
84429
81631
84423
Light with 50' Cord
Replacement Bulb
Replacement Lens
1
1
1
FLUORESCENT WORK LIGHT REEL
W/ AUTO SWITCH
• Auto switch in reel to automatically turn light on or
off as the cord is extended or retracted.
• 13 watt fluorescent rough service bulb included.
• 40' of 18/2 SJTOW-A cord.
• Use with Replacement Bulb, Part No. 81631.
• Includes wall mounting hardware.
PART NO.
DESCRIPTION
QTY.
84443
84443-1
81631
Light with 40' Cord
Replacement Head
Replacement Bulb
1
1
1
JR LED WORK LIGHT REEL
• (1) 4-watt 110° angle LED
• On/off switch
• Cord Length: 50'
• Cord: 18/2 SVT
• Includes wall mounting hardware
Dawn
Sales Manager
“Continual product and sales
training gives our Dedicated
Service Advisors the expertise
our customers value.”
CALL
1-800-558-2808 /
DESCRIPTION
Light with 50' Cord
QTY.
STUBBY II LED WORK LIGHT REEL
Reliable…
M20
PART NO.
84445
FAX
• (2) 4-watt 110° angle LEDs provide more light
intensity than a 13-watt fluorescent lamp
• Also has a 1-watt lensed flashlight at the top
• On/off switch
• Cord Length: 50'
• Cord: 18/2 SVT
• Includes wall mounting hardware
PART NO.
DESCRIPTION
84446
Light with 50' Cord
1-800-553-8769 /
QTY.
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LIGHTING
CORDED FLUORESCENT WORK LIGHTS
12V FLUORESCENT WORK LIGHT
ROUGH DUTY FLUORESCENT
SPOT WORK LIGHT
• Functions as a work light or a spot light.
• High impact lamp protector, flame retardant handle.
• 13 watt fluorescent bulb included.
• Recessed rocker switch with 12 amp grounded receptacle.
• Includes double hang hook.
PART NO.
DESCRIPTION
WIRE
QTY.
81682
81729
81694
81631
Light with 25'
Light with 50'
Fluorescent Magnet
Replacement Bulb
16/3
16/3
—
—
1
1
1
1
• High impact lamp protector, flame retardant handle.
• Recessed rocker switch.
• Includes double hang hook.
• Operate using attached 12 volt cigarette lighter adapter.
• 13 watt fluorescent bulb included.
PART NO.
DESCRIPTION
WIRE
QTY.
81686
81702
Light with 20' cord
Replacement Bulb
18/2
—
1
1
FLUORESCENT WORK LIGHT
OSHA FLUORESCENT WORK LIGHT
• Meets OSHA requirements. (No receptacle or
metal, OSHA approved on-off switch).
• Enclosed polypropylene ballast in cord.
• High-impact, chemical-resistant, clear lamp protector.
• Thermoplastic insulated 25'.
• 13 watt fluorescent bulb included.
PART NO.
DESCRIPTION
WIRE
QTY.
81735
81631
OSHA Fluorescent Work Light
Replacement Bulb
18/2
—
1
1
• 15 watt rough service fluorescent bulb included.
• Cord Length: 25' of 18/2 SJTOW-A wire
• Use Replacement Bulb, Part No. 81614.
PART NO.
DESCRIPTION
WIRE
QTY.
84442
81614
Light with 25' cord
Replacement Bulb
18/2
—
1
1
CORDLESS LED WORK LIGHTS
CORDED LED WORK LIGHTS
CORDLESS LED WORK LIGHT
CORDED LED WORK LIGHT
• Three function rechargeable LED light.
»Spot, Flood, Dual-Light
• Spotlight with 1 LED in end lens.
• Floodlight with 30 LEDs along the body.
• Provides 6-hour flood, 4-hour spot or 2 hour dual run time.
• Six-hour charge time.
• Wall and car chargers included.
• Clip-magnet for hands free lighting.
• Lumens:
»Spot: 45
»Flood: 60
»Dual: 105
• Practically indestructible work light.
• Each LED is rated up to 70,000 hours.
• Compact 1-1/4" diameter for access to tight areas.
• Convenient push button on/off switch.
PART NO.
LEDS
QTY.
84427
30/1
1
CORDLESS LED WORK LIGHT
• Two function rechargeable LED light.
• Spotlight with 6 LEDs in end lens.
• Floodlight with 60 LEDs along the body.
• Provides 4-hour flood or 24-hour spot run time.
• Four-hour charge time.
• Wall and car chargers included.
• Lumens:
»Spot: 12
»Flood: 120
PART NO.
LEDS
QTY.
84428
60/6
1
PART NO.
LEDS
WIRING
CORD
LENGTH
QTY.
81687
60
18/2
25"
1
CORDLESS FLUORESCENT WORK LIGHTS
RECHARGEABLE FLUORESCENT WORK LIGHT
• One hour charge time.
• Includes a charging cord and hanging hook.
• 90 minutes of light on a fully charged battery.
PART NO.
DESCRIPTION
QTY.
81714
81702
Work Light Fluorescent
Replacement Bulb
1
1
CONNECT WITH IMPERIAL SUPPLIES
M21
SHOP SUPPLIES
LIGHTING
FLASHLIGHTS
INDUSTRIAL ORANGE FLASHLIGHT
SAFETY ORANGE FLASHLIGHT
• High-impact ribbed plastic casement of polypropylene for long-lasting durability.
• Switch guard helps reduce accidental lighting in pocket.
• Tuflexx lens of virtually unbreakable polycarbonate material for toughness.
• Buttress threads for sure grip fit on lens ring and end cap.
• PR-2 bulb gives superior light output.
• Positive on/off switch action
helps prevent inadvertent lighting.
• Spare bulb compartment makes bulb
replacement easy and convenient.
• Requires (2) D batteries, sold separately.
• Switch guard helps with accidental lighting.
• Spare bulb holder.
• Ring hanger for easy storage.
• Mine Safety and Health Administration (MSHA).
• Underwriters Laboratories-Class 1, Group D.
• Requires (2) D batteries, sold separately.
PART NO.
DESCRIPTION
QTY.
5001
81520
Flashlight
Replacement Bulb PR-2
1
10
QTY.
5807
81520
Flashlight
Replacement Bulb PR-2
1
10
QTY.
1
10
• Intrinsically safe, zone zero rating LED flashlight.
• Safety Approvals:
»UL 913 CSA C22.2
»Class 1 Div 1 Groups A,B,C,D
»Class 1 Div 2 Groups A,B,C,D
»Class 2 Div 1 Groups E,F,G
»Class 2 Div 2 Groups F,G
»Class 3
»T3
• Worldwide Safety Standard: IECEx Exia IIC T4 iaD T135C Ga, Da
• Lumens: 90
• Run-time: 22 hrs
• Batteries: 3 AA (not included)
• Color: Safety Orange
• Spare bulb compartment makes bulb
replacement easy and convenient.
• Ring hanger for easy storage.
• ASTM & MSHA approved.
• Requires (2) D batteries, sold separately.
DESCRIPTION
DESCRIPTION
Flashlight
Replacement Bulb PR-2
ORANGE SAFETY FLASHLIGHT
SAFETY ORANGE WATERPROOF FLASHLIGHT
PART NO.
PART NO.
5002
81520
PART NO.
DESCRIPTION
QTY.
84578
5262
LED Flashlight Orange
AA-Cell Duracell Procell
1
12
YELLOW FLASHLIGHT WITH MAGNET
• Anti-roll.
• Magnetic.
• Flip ring for hanging.
• Requires (2) D batteries, sold separately.
GREEN DUAL-LIGHT LED SAFETY FLASHLIGHT & FLOODLIGHT
• cETLus listed intrinsically safe for use in Class I, II, III Div I,
Groups A-G hazardous workplace environments.
• Sharp, focused flashlight beam for distance illumination.
• Unfocused wide-beam floodlight for close-up illumination.
• Lumens:
»Flashlight: 80
»Floodlight: 80
• Dual-light: 160
• Run-time:
»Flashlight: 14.5 hrs
»Floodlight: 14.5 hrs
»Dual-light: 7 hrs
• Beam Distance: 95 meters
• Water Rating: IP-X7 waterproof
• Drop Rating: 2 meters
• Batteries: 3 AA (not included)
• Color: Green
PART NO.
DESCRIPTION
QTY.
84576
5262
LED Flashlight Green
AA-Cell Duracell Procell
1
12
M22
CALL
1-800-558-2808 /
PART NO.
DESCRIPTION
QTY.
5803
81492-3
8" Flashlight
Replacement Bulb
1
12
HIGH-VISABILITY GREEN LED SAFETY FLASHLIGHT
• Intrinsically safe, zone zero rating LED flashlight.
• Safety Approvals:
»UL 913 CSA C22.2
»Class 1 Div 1 Groups A,B,C,D
»Class 1 Div 2 Groups A,B,C,D
»Class 2 Div 1 Groups E,F,G
»Class 2 Div 2 Groups F,G
»Class 3
»T3
• Worldwide Safety Standard: IECEx Exia IIC T4 iaD T135C Ga, Da
• Lumens: 90
• Run-time: 22 hrs
• Batteries: 3 AA (not included)
• Color: High-Vis Green
FAX
PART NO.
DESCRIPTION
84577
5263
LED Flashlight Yellow
1
AAA-Cell Duracell Procell 12
1-800-553-8769 /
QTY.
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LIGHTING
FLASHLIGHTS
LED FLASHLIGHT
LED FLASHLIGHT
• LED industrial flashlight.
• Rubber body with lanyard.
• Push button switch.
• Lumens: 45
• Run-time: 6 hrs
• Batteries: 3 AAA (not included)
• Color: Black
• LED industrial flashlight.
• Rubber body with lanyard.
• Push button switch.
• Lumens: 17.5
• Run-time: 11 hrs
• Batteries: 2 AA (not included)
• Beam Distance: 20 ft
• Color: Black
• Water penetration rating IPX4
PART NO.
DESCRIPTION
84555
5263
LED Flashlight
1
AAA-Cell Duracell Procell 12
QTY.
PART NO.
DESCRIPTION
QTY.
84558
5262
LED Flashlight
AA-Cell Duracell Procell
1
12
LED FLASHLIGHT
• LED industrial flashlight.
• Rubber body.
• Push button switch.
• Lumens: 80
• Run-time: 6 hrs
• Batteries: 3 AA (not included)
• Beam Distance: 150 ft
• Color: Black
YELLOW PELICAN LED SAFETY FLASHLIGHT
PART NO.
DESCRIPTION
QTY.
84560
5262
LED Flashlight
AA-Cell Duracell Procell
1
12
• LED safety flashlight.
• Safety Rating: Class I,II,III Div 1 Groups A,B,C,D,E,F,G T4
• Lumens: 21
• Run-time:4 hrs
• Beam Distance: 51 meters
• Water Rating: IP-X7 waterproof
• Batteries: 3 AAA (included)
• Color: Yellow
PART NO.
DESCRIPTION
84575
5263
LED Flashlight Yellow
1
AAA-Cell Duracell Procell 12
QTY.
LED FLASHLIGHT
• LED industrial flashlight.
• Aluminum and rubber body.
• Push button switch.
• Lumens: 80
• Run-time: 25 hrs
• Batteries: 3 AAA (not included)
• Color: Silver and Black
LED FLASHLIGHT
PART NO.
DESCRIPTION
84556
5263
LED Flashlight
1
AAA-Cell Duracell Procell 12
QTY.
• LED industrial flashlight.
• ABS plastic body with lanyard.
• Push button switch.
• Lumens: 180
• Run-time: 5 hrs
• Batteries: 4 AA (not included)
• Beam Distance: 500 ft
• Color: Yellow/Black
PART NO.
DESCRIPTION
QTY.
84562
5262
LED Flashlight
AA-Cell Duracell Procell
1
12
LED FLASHLIGHT
• LED industrial flashlight.
• Aluminum body.
• Push button switch.
• Lumens: 160
• Run-time: 20 hrs
• Batteries: 3 AA (not included)
• Beam Distance: 200 ft
• Color: Black
4" LED MINI FLASHLIGHT
• Nine super bright LEDs give this pocket light plenty of power.
• 90,000 micro candela (mcd) output.
• Compact, rugged construction.
• Attached lanyard.
• Lamp life up to 100,000 hours.
• Required three AAA batteries, included.
PART NO.
DESCRIPTION
QTY.
PART NO.
DESCRIPTION
QTY.
84561
5262
LED Flashlight
AA-Cell Duracell Procell
1
12
5016
5263
9 LED Flashlight
AAA-Cell Duracell Procell
1
12
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M23
SHOP SUPPLIES
LIGHTING
FLASHLIGHTS
MAGLITE® LED FLASHLIGHT
MAGLITE® LED FLASHLIGHT
• LED industrial flashlight.
• Aluminum body.
• Push button switch.
• Spot to flood adjustable beam
• 3 modes: 100 percent, 25% power
and emergency safety strobe.
• Max Lumens: 139
• Run-time:
»100% power: 6.5 hrs
»25% power: 33 hrs
• Max Beam Distance: 213 meters
• Batteries: 3 AAA (included)
• Color: Black
• LED industrial flashlight.
• Aluminum body.
• Push button switch.
• Lumens: 134
• Run-time: 8 hrs
• Batteries: 2 D (not included)
• Beam Distance: 388 meters
• Color: Black
PART NO.
DESCRIPTION
84557
5263
LED Flashlight
1
AAA-Cell Duracell Procell 12
PART NO.
DESCRIPTION
QTY.
84564
5260
LED Flashlight
D-Cel Duracell Procell
1
12
QTY.
MAGLITE® LED FLASHLIGHT
SEE PAGE M26
• LED industrial flashlight.
• Aluminum body.
• Push button switch.
• Lumens: 131
• Run-time: 79 hrs
• Batteries: 3 D (not included)
• Beam Distance: 364 meters
• Color: Black
Batteries
PART NO.
DESCRIPTION
QTY.
84565
5260
LED Flashlight
D-Cel Duracell Procell
1
12
FLASHLIGHT REPLACEMENT BULBS
KRYPTON REPLACEMENT BULBS
MINI MAGLITE® AA FLASHLIGHT BULB
• Brighter than standard bulbs.
• Can be used in any standard bulb application.
PART NO.
BULB NO.
FLASHLIGHT TYPE
QTY.
81492
81492-3
81493
81494
81438
KPR-2
KPR-2
KPR-3
KPR-13
KPR-104
Use in flashlights with 2 "D" cells.
Use in flashlights with 2 "D" cells.
Use in 3 "D" cell flashlights.
Use in 6 V lanterns.
Use in, 5806
10
12
10
10
10
• Use in Mini Maglite® AA flashlight.
• Cross reference: LM2A001
• Average lumens: 15.2
• Peak beam candle power: up to 2,952
PART NO.
QTY.
81447
2
REPLACEMENT BULBS
PART NO.
BULB NO.
FLASHLIGHT TYPE
QTY.
81520
81520-3
81522
81521
PR-2
PR-2
PR-13
PR-3
Use in 2 "D" cell flashlights.
Use in 3 "D" cell flashlights.
Use in 6 V lanterns (15 hour, 2.0 CA)
Use in 3 cell flashlights (15 hour, 1.5 CA)
10
10
10
10
M24
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LIGHTING
PEN LIGHTS
STREAMLIGHT LED PEN LIGHT
STREAMLIGHT LED PEN LIGHT
• Pocket sized inspection light.
• Aluminum body with removable hat/pocket clip.
• Push button switch in the tail cap.
• Lumens: 48
• Run-time: 6 hrs
• Batteries: 2 AAA (included)
• Beam Distance: 64 meters
• IPX4 rated for water resistance.
• 1 meter impact resistance tested.
• Color: Black
• Pocket sized inspection light.
• Aluminum body with removable hat/pocket clip.
• Push button switch in the tail cap.
• Lumens: 28
• Run-time: 2 hrs
• Batteries: 1 AAA (not included)
• Beam Distance: 52 meters
• IPX4 rated for water resistance.
• 1 meter impact resistance tested.
• Color: Black
PART NO.
DESCRIPTION
84573
5263
LED Pen Light
1
AAA-Cell Duracell Procell 12
QTY.
PART NO.
DESCRIPTION
84571
5263
LED Pen Light
1
AAA-Cell Duracell Procell 12
QTY.
LED PEN LIGHT
LED PEN LIGHT
• Pocket sized inspection light.
• Aluminum body with pocket clip.
• Push button on the tailcap.
• Lumens: 3
• Run-time: 25 hrs
• Batteries: 2 AAA (included)
• Color: Silver
PART NO.
DESCRIPTION
84572
5263
LED Pen Light
1
AAA-Cell Duracell Procell 12
QTY.
• Pocket sized inspection light.
• Aluminum body with pocket clip.
• Tail cap twist switch.
• Flexible neck with tailcap magnet.
• Lumens: 8.5
• Run-time: 10 hrs
• Batteries: 1 AAA (not included)
• Beam Distance: 26 ft
• Color: Silver
PART NO.
DESCRIPTION
84570
5263
LED Pen Light
1
AAA-Cell Duracell Procell 12
QTY.
HEADLAMPS
LED HEADLAMP
PRINCETON TEC LED HEADLAMP
• Headlamp with spotlight, floodlight and dual function light.
• Super bright white LEDs with 35,000 hour life.
• Light weight and comfortable.
• Spotlight: 1 LED = 65 lumens
• Floodlight: 12 LEDs = 24 lumens
• Dual-light: 13 LEDs = 89 lumens
• Requires AAA batteries, included.
• LED headlamp with head strap.
• Plastic body.
• Push button switch.
• 2 lighting modes: flood, and spot
• 2 power levels: high and low
• Lumens: 100
• Run-time
»High Flood: 61 hrs
»Low Flood: 200 hrs
»High Spot: 28 hrs
»Low Spot: 53 hrs
PART NO.
QTY.
5800
1
PART NO.
QTY.
84552
1
LED HEADLAMP
LED HEADLAMP
• LED headlamp with 2 head straps.
• Plastic body.
• Push button switch.
• Lumens: 26
• Run-time: 11 hrs
• Batteries: 3 AAA (not included)
• Color: Black
• LED headlamp with head strap.
• Plastic body.
• Push button switch.
• Lumens: 145
• Run-time: 5 hrs
• Batteries: 3 AAA (not included)
• Color: Silver
PART NO.
QTY.
PART NO.
QTY.
84550
1
84553
1
• Beam Length
»High Flood: 30 meters
»Low Flood: 15 meters
»High Spot: 75 meters
»Low Spot: 55 meters
• Batteries: 3 AAA (included)
• Body Color: Black
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M25
SHOP SUPPLIES
BATTERIES
C O I N C E L L & S P E C I A L I T Y B AT T E R I E S
S TA N D A R D B AT T E R I E S
DURACELL® PROCELL® BATTERY
ALKALINE BATTERIES
• For professional applications.
• Meets the high standards of durability and longevity professional users expect.
• Dependable even after seven years of storage.
• Does not contain mercury.
• Date coded to ensure freshness.
• Battery commonly found in garage door openers.
PART NO.
DESCRIPTION
QTY.
5260
5261
5262
5263
5264
5265
D alkaline
C alkaline
AA alkaline
AAA alkaline
9 V alkaline
AAAA alkaline
12
6
12
12
6
12
DESCRIPTION
QTY.
Size C
Size D
9V
9V
6 V Lantern
6
12
6
12
2
QTY.
5259
5150
5266
AAA Lithium
AA Lithium
9 V Lithium
4
8
1
QTY.
5279
1
M26
CALL
1-800-558-2808 /
DESCRIPTION
VOLTS
QTY.
5015
MN21
Alkaline
12
2
PART NO.
CROSS
REF.
DESCRIPTION
SHAPE
VOLTS
QTY.
5119
5271
5256
5277
5272
5276
5269
5257
5275
5275-2
5258
1220
1616
1620
1632
2016
2025
2032
2450
CR123
CR123
CR2
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Coin
Coin
Coin
Coin
Coin
Coin
Coin
Coin
Cylinder
Cylinder
Cylinder
3
3
3
3
3
3
3
3
3
3
3
5
6
6
6
6
6
5
5
10
2
1
PART NO.
CROSS
REF.
DESCRIPTION
VOLTS
QTY.
5268
BR2/3A
Lithium
3
1
• New technology provides unsurpassed battery
power in today's high drain devices.
• Charges up to 1,000 times, making it the most
economical battery power source.
• Nickel metal hydride for high energy
and high performance.
• For use with Battery Charger, Part No. 5094.
• Kit Contains:
» (2) RC123 rechargeable
batteries, Part No. 5278
» (1) Battery Charger
» (1) 110-240C AC support plug
» (1) 12V car lighter plug
» Built-in intelligent IC protection.
QTY.
CROSS
REF.
NiMH RECHARGEABLE BATTERIES
RECHARGEABLE CR123A BATTERY KIT
PART NO.
PART NO.
R E C H A R G E A B L E B AT T E R I E S
• Universal charger for both NiMH and NiCd batteries.
• Charges AA, AAA, C, D and 9 V.
• LED indicator makes it easy to see
when batteries are fully charged.
• Automatic reverse cell protection.
1
1
6
• Lithium batteries are longer lasting than standard batteries.
BATTERY CHARGER
PART NO.
12
12
LITHIUM SPECIALTY BATTERIES
B AT T E R Y C H A R G E R S
5094
QTY.
Alkaline
Alkaline
• Batteries commonly found in keyless vehicle remotes.
• Lithium manganese dioxide (LiMnO2) chemistry
ensures long shelf life.
• Individually wrapped to ensure optimal performance.
• Consistent voltage in wide range of discharge
conditions and in extreme temperatures.
• Long life and less battery replacement.
DESCRIPTION
VOLTS
A23
A27
LITHIUM BATTERIES
LITHIUM BATTERIES
PART NO.
DESCRIPTION
5270
5481
• Battery commonly found in garage door openers.
• Capable of five year storage with less than 15% loss of power.
• Formulated for industrial use.
• Sealed in steel for longer storage life.
• Carbon zinc.
PART NO.
CROSS
REF.
ALKALINE BATTERIES
HEAVY-DUTY INDUSTRIAL BATTERIES
5013
5000
5014
5014-4
5008
PART NO.
PART NO.
DESCRIPTION
QTY.
5120
5099
5011
AAA Rechargeable
AA Rechargeable
9 V Rechargeable
4
4
6
RECHARGEABLE SPECIALTY BATTERIES
• Replaces any primary Lithium CR123A.
• Rating: 750mAh super high capacity.
• Up to 1,000 time cycles.
• Use with Charger Part No. 5279.
FAX
PART
NO.
CROSS
REF.
DESCRIPTION
VOLTS
QTY.
5278
5278-2
RC123
RC123
LiFePO4 3.0V
LiFePO4 3.0V
3
3
12
2
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
ELECTRICAL BOXES & RECEPTACLES
LIQUID TIGHT NON-METALLIC STRAIN
RELIEF COMPRESSION FITTING
WEATHERPROOF BOX COVER
• Used when an outdoor outlet requires weatherproof protection.
• Covers have a versatile installation that can be both device and box mounted
• Rugged die-cast construction.
• Innovative powder-coated finish that promotes maximum durability, weather
protection and scratch resistance.
• Device covers have self-closing lids protecting the receptacle when it is not in use.
• Installation hardware and gasket included.
• Provides ratchet cable enclosing, eliminating
loosening caused by vibration.
PART NO.
INT. DIA. RANGE
NPT THREAD
QTY.
84500
84500-2
84501
.545" - .709"
.545" - .709"
.197" - .472"
3/4
3/4
1/2
50
5
5
CAST ALUMINUM SINGLE GANG
ELECTRICAL BOX
• Includes detachable lugs, two closure plugs
and ground screws already installed.
• Use as weatherproof junction boxes to
install receptacles, switches and GFCIs.
• Powder-coated finish and reinforced connector
outlets promote maximum durability,
weather protection and scratch resistance.
#72796
#72797
PART NO.
THREADED OUTLETS
QTY.
71608
71637
Size: 3/4, Ends: 1-1, Back 1
Size: 1/2, Ends: 1-1, Back 1
2
2
CAST ALUMINUM DOUBLE GANG
WEATHERPROOF BOX
• Includes detachable lugs, two closure plugs
and ground screws already installed.
• Use as weatherproof junction boxes to
install receptacles, switches and GFCIs.
• Powder-coated finish and reinforced connector
outlets promote maximum durability,
weather protection and scratch resistance.
• 2" deep
#72799
#72794
#72798
PART NO.
STYLE
COLOR
QTY.
72797
72798
72796
72794
72799
1 GFI, 1 Duplex Receptacle
2 GFCI Receptacle
2 Duplex Receptacle
30A Receptacle
30-60A Receptacle, 220V
Silver
Silver
Silver
Silver
Silver
2
2
2
2
2
SINGLE GANG GFCI VERTICAL COVER
• Vertical protective metal cover for GFCI receptacles.
• Die cast aluminum.
• Gaskets and screws included.
PART NO.
THREADED OUTLETS
QTY.
72795
1/2" NPT 2 EA side, 1 bottom
2
PART NO.
STYLE
COLOR
QTY.
71940
2 GFI Receptacle
Silver
1
#71942 & #71944
PROTECTIVE RECEPTACLE COVER
SHOCK ENTRY GFCI RECEPTACLE
• Ground fault circuit interrupter protects against
ground fault leakage or shock.
• Super Spec device features rugged steel plated metal strap.
• Indicator lights show available power on portable.
• GFCIs include matching decorator wall plate.
• UL File GFCIs E60120 KCXS.
• Trip and reset buttons for easy monthly inspection.
PART NO.
AMP
VOLT
GROUNDING
COLOR
QTY.
71931
71945
20
15
125
125
NEMA 5-20R 2P3W
NEMA 5-15R 2P3W
Ivory
Ivory
1
1
STRAIGHT BLADE RECEPTACLE
• 15 amp 125 volt NEMA 5-15R.
• Large head terminal screws take up to #10 wire.
• Compact design provides more wiring space in outlet box.
• UL File E 150 58 RTRT.
• For Shock Entry GFCI Receptacles.
PART NO.
DESCRIPTION
MATERIAL
COLOR
QTY.
71942
71943
71944
71948
Vertical
Horizontal
Vertical
Horizontal
Plastic
Plastic
Metal
Metal
Gray
Gray
Gray
Gray
1
1
1
1
#71943 & #71948
SINGLE GANG GFCI CLEAR
PLASTIC VERTICAL COVER
• Seals out moisture, sheds
water, ice and snow.
• UV resistant, non-corrosive,
non-conductive.
• Two exit ports accept up to
12/3 gauge cords.
• Lockable by padlock for
lockout/tagout requirements.
PART NO.
AMP
VOLT
GROUNDING
COLOR
QTY.
PART NO.
QTY.
71688
15
125
—
White
1
71932
1
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M27
SHOP SUPPLIES
TAPES
E L E C T R I C A L TA P E S
IMPERIAL® ELECTRICAL TAPE
3M™ COLORED ELECTRICAL TAPE
• UL listed, CSA certified.
• Suitable for use at not more than 600
volts and not more than 80° C (176° F).
• Resistant to oil, water, wear, chemicals,
and solvents.
• Withstands severe conditions.
• Flame retardant.
• Excellent resistance to: abrasion, moisture, alkalies, acid, copper
corrosion and varying weather conditions (including sunlight)
• Provides excellent mechanical protection with minimum bulk.
• Flame-retardant and conformable.
• PVC tape that has a high wet dielectric strength.
• UL listed and CSA certified Insulating Tape.
PART NO.
COLOR
ROLL SIZE
QTY.
71668
Black
3/4" x 60'
10
VINYL FLAME RETARDANT
ELECTRICAL TAPE
• Flame retardant all weather vinyl electrical insulating tape.
• Flexible PVC backing.
• Resistant to UV rays, most acids, alkalis, abrasions,
moisture and corrosion.
• Offers a moisture-tight seal even in extremely hot and
cold temperatures.
• UL,CE and CSA listed.
• Electrical insulating properties provide primary
electrical insulation for splices up to 600V.
• Resistant to abrasion, corrosion, and UV wear.
• Inhibits corrosion of electrical conductors.
• Thickness: 7 mil
• Temperature Rating: -10° C to 80° C (14° F to 176° F.)
• Applications:
»Primary electrical insulation for all wire and cable
splices rated up to 600 volts.
»Protective jacketing for high voltage cable splices
and repairs.
»Harnessing of wires and cables.
PART NO.
COLOR
ROLL SIZE
QTY.
7099
71704
71705
71706
71707
71708
71709
71768
Gray
White
Green
Yellow
Orange
Red
Blue
Brown
3/4 x 66'
3/4 x 66'
3/4 x 66'
3/4 x 66'
3/4 x 66'
3/4 x 66'
3/4 x 66'
3/4 x 66'
10
10
10
10
10
10
10
10
SCOTCH® SUPER 33+™ VINYL ELECTRICAL TAPE
• Premium grade vinyl electrical insulating tape.
• Flexible PVC backing.
• Aggressive adhesive and elastic backing ensure easy, water-resistant
conformation to irregular surfaces in low temperatures, yet will not
melt in high temperatures.
• Electrical insulating properties provide primary
electrical insulation for splices up to 600V.
• Resistant to abrasion, corrosion, and UV wear.
• Inhibits corrosion of electrical conductors.
• Size: 3/4" W x 66' L
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
71993
M333
Black
3/4 x 66'
10
71639
06132
Black
3/4 x 66'
10
F I L M TA P E S
3M™ SQUEAK REDUCTION TAPE
TRAILER REPAIR FILM
• Used in the automotive industry to help control squeaks and
rattles due to vibration or wear of metal and plastic materials.
• Provides excellent abrasion resistance.
• Adhesive Material: Acrylic
• Thickness: 7 mil (0.18 mm)
• Clear poly film used to placed between sections of metal to
prevent corrosion due to dielectric contact.
• Thickness: 7 mil
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
8023
06356
Transparent
1" x 3 yd
1
PART NO.
COLOR
SIZE
QTY.
7611
Transparent
12"x 25"
1
Download the Imperial App today.
M28
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
TAPES
F O A M TA P E S
3M™ AUTOMOTIVE ACRYLIC
PLUS ATTACHMENT TAPE
3M™ 4920 VHB FOAM TAPE
• Medium-density, black acrylic foam tape.
• High performance acrylic adhesives on both sides and a red release liner.
• This tape is a stronger, higher stress handling
product than other automotive attachment tapes.
• Offers a more robust performance to a wide
variety of automotive substrates.
• Uses automotive OEM approved acrylic
foam core and adhesive technology.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
THICKNESS
QTY.
8022
71662
7997
87998
71617
71617-1
71617-2
06386
06384
06382
06395
06383
06383
06383
Black
Black
Black
Black
Black
Black
Black
1/4 x 20 yd
1/2 x 5 yd
1/2 x 20 yd
7/8 x 10 yd
7/8 x 20 yd
7/8 x 20 yd
7/8 x 20 yd
.045"
.045"
.045"
.060"
.045"
.045"
.045"
1
1
1
12
12
6
2
• Double coated acrylic foam tape with a 15 mil white, closed-cell acrylic carrier.
• Used for cushioning, damping and impact resistance.
• High strength.
PART NO.
COLOR
ROLL SIZE
QTY.
7666
7667
Clear
Clear
1-1/4 x 72 yd
1-1/2 x 72 yd
2
2
3M™ 4950 VHB FOAM TAPE
• 45 mil thick white closed cell acrylic foam carrier
with all purpose acrylic adhesive and paper liner.
• Excellent cushioning, sound dampening
and impact resistance.
• Works well to bond aluminum skin
to steel support of truck.
• High strength.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
7661
7689
63383
18092
White
White
2" x 36 yd
1" x 36 yd
2
1
3M™ ACRYLIC PLUS TAPE PT 1100
• Double-coated acrylic foam tape designed for the attachment of automotive
exterior trim parts such as body side moldings and claddings.
• Superior adhesion to automotive paint surfaces, excellent wet out, improved
bond line quality and easy-liner release.
• Cold temperature impact resistance.
• High strength core with
low elongation properties.
• Easy liner release.
• High conformity.
PART NO.
COLOR
ROLL SIZE
THICKNESS
QTY.
7630
Black
2" x 144 yd
.045"
1
COLOR
ROLL SIZE
QTY.
Gray
Gray
1-1/4 x 36 yd
1-1/2 x 36 yd
2
2
PART
NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
8057
03420
Black
1.25" x 10 yd
6
• Self-adhesive on one side.
• Black soft neoprene.
• Various widths to cover most applications.
• Double coated .045" (1.1 mm) pressure-sensitive adhesive tape
for bonding metals and other high surface energy materials.
• Durable and high temperature resistant.
• Strength to replace mechanical fasteners and spot
welds in many applications.
PART NO.
• Adhesive-backed foam seals out dust, moisture and vibrations.
• Seals gaps between pickup truck cap and bed rails.
• Helps to insulate.
• Thickness: .169"
NEOPRENE WEATHER STRIPPING
3M™ 4611 VHB™ FOAM TAPE
7668
7669
3M™ PICKUP CAMPER TAPE
PART NO.
THICKNESS
SIZE
LENGTH
QTY.
5081
5080
5084
5083
5085
5086
5082
5073
5/16
5/16
5/16
1/2
1/8
1/4
1/2
1"
3/8
1/2
3/4
7/16
1"
1"
1"
1"
25'
25'
25'
25'
50'
25'
25'
10'
2
2
2
2
2
2
2
1
DOUBLE COATED TAPE SQUARES
• 1" x 1" square double sided tape.
3M™ AUTOMOTIVE ATTACHMENT TAPE
• Acrylic foam tape.
• Acrylic adhesive and a red release liner.
• Good peel and shear adhesion, internal strength,
conformability and plasticizer resistance.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
7606
16U621
white
256 squares
1
FOAM TAPE
PART NO.
CROSS REF.
COLOR
THICKNESS
SIZE
LENGTH
QTY.
8051
8052
8053
8054
8055
06377
06378
06380
06381
06397
Gray
Gray
White
White
Black
.030"
.030"
.045"
.045"
.030"
1/2"
7/8"
1/2"
7/8"
1/2"
60'
60'
60'
20'
30'
1
1
1
1
1
• Neoprene-EPDM blend closed cell foam tape.
• Rubber based PSA coated on one side with release liner.
• Exhibits superior sound, shock and vibration cushioning.
• Excellent solution for gaskets and weatherstripping.
• Soft density, 3/16 thick.
PART NO.
COLOR
ROLL SIZE
QTY.
87997
Black
1.5" x 50'
1
CONNECT WITH IMPERIAL SUPPLIES
M29
SHOP SUPPLIES
TAPES
M A S K I N G TA P E S
PA C K A G I N G TA P E S
SCOTCH® PERFORMANCE GREEN MASKING TAPE 233+
CARTON AND PACKAGE SEALING TAPE
• Highly conformable, provides the best adhesive
transfer resistance, hugs curves and contours
and provides outstanding paint lines.
• Goes on quickly and easily, sticks at a touch and stays put.
• Perfectly balanced to give outstanding masking results.
• Polypropylene tape used for sealing packages and cartons for shipping.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
THICKNESS
QTY.
7639
7685
7644
7769
8062
26334
26336
26340
26341
26338
Green
Green
Green
Green
Green
18 mm x 55 m
24 mm x 55 m
48 mm x 55 m
3" x 55 m
36 mm x 55 m
6.6 mil
6.6 mil
6.6 mil
6.6 mil
6.6 mil
1
1
1
1
1
COLOR
ROLL SIZE
QTY.
8060
8061
06334
06340
Natural
Natural
18 mm x 55 m
48 mm x 50 m
1
1
ROLL SIZE
QTY.
1/2 x 60 yd
3/4 x 60 yd
1" x 60 yd
6
4
4
QTY.
7623
7623-4
7802
7624
7624-4
2" x 55 yd
2" x 55 yd
2" x 110 yd
2" x 55 yd
2" x 55 yd
1.8 mil
1.8 mil
1.9 mil
1.9 mil
1.9 mil
40° to 120° F
40° to 120° F
20° to 150° F
32° to 200° F
32° to 200° F
4
36
1
4
36
PART NO.
ROLL SIZE
QTY.
7629
7629-4
48 mm x 55 m roll
48 mm x 55 m roll
2
36
• Material: Polypropylene
• Adhesive: Emulsion Acrylic
• Color: Clear
• Thickness: 2.5 mil
• Temperature Range: -20° F to 180° F
• Professional quality, peels clean up to 150° F.
PART NO.
TEMPERATURE
RANGE
CARTON SEALING TAPE
GENERAL PURPOSE MASKING TAPE
73782
71664
71692
THICKNESS
• Resists center seam splitting,
assures reliable closures.
• Seals out moisture, dust and dirt.
• Conformable, provides the best adhesive transfer resistance,
hugs curves, contours and provides outstanding paint lines.
• Goes on quickly and easily, sticks at a touch and stays put.
• Perfectly balanced to give outstanding masking results.
PART NO.
ROLL SIZE
SCOTCH® PREMIUM HEAVY
DUTY PACKAGING TAPE
SCOTCH® AUTOMOTIVE REFINISH MASKING TAPE 233
CROSS
REF.
PART
NO.
PART NO.
ROLL SIZE
QTY.
87999
2" x 55 yd roll
1
FLATBACK PAPER TAPE
• Material: Paper
• Adhesive: Synthetic
• Color: Brown
• Thickness: 5.6 mil
• Temperature Range: 40° F to 150° F
3M™ TRIM MASKING TAPE
• Works well on flush mount windshield and back glass molding.
• The firm strip of this tape is slid under the molding.
• The liner on the remaining adhesive side is then removed and the
tape is folded over and adhered to the glass, actually lifting up the
molding and allowing paint to flow under it.
• Saves time, labor and the cost of removing
and installing new moldings, plus the removal
of paint lines on existing moldings.
PART NO.
CROSS
REF.
ROLL SIZE
ADHESIVE
WIDTH
QTY.
8025
8048
8049
06439
06345
06347
2" x 10.95 yd
2" x 10.95 yd
2" x 10.95 yd
10 mm
5 mm
7 mm
1
1
1
PART NO.
ROLL SIZE
QTY.
7320
2" x 55 yd roll
1
CARTON SEALING TAPE DISPENSER
• Heavy-duty pistol grip dispenser for
2" wide carton sealing tape.
PART NO.
QTY.
7625
1
M A R K I N G & WA R N I N G TA P E S
FLAGGING TAPE
• Orange fluorescent.
• A perfect way to mark problem areas.
• Bright color permits clear visibility.
NATURAL COLOR MASKING TAPE
• Material: Smooth Crepe Paper.
• Color: Natural.
• Thickness: 6.7 mil.
• Tensile Strength: 25 lb./in.
• Adhesion Strength: 30 oz./in.
• Adhesive: Rubber/Resin.
• Performance Temp: Up to 325° F
PART NO.
ROLL SIZE
QTY.
71661
1-3/16" x 150'
12
FLOOR MARKING TAPE
• For marking traffic patterns on aisles, floors, etc.
• Adhesive backing.
• Highly visible black and yellow stripes.
PART NO.
ROLL SIZE
QTY.
PART NO.
ROLL SIZE
QTY.
71953
2" x 60 yd
4
7620
2" x 54'
1
M30
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
TAPES
L A B E L I N G TA P E
S P E C I A LT Y TA P E S
3M™ VINYL TAPE 471+
POST-IT™ REMOVABLE LABELING TAPE
• Vinyl backing with a rubber adhesive.
• Maintains color even when exposed to heavy abrasion.
• Conformable, dead stretch properties to provide
straighter lines, clean removability.
• Color: Indigo.
• Use for bin and shelf marking,
package identification and correction.
PART NO.
ROLL SIZE
QTY.
8067
8068
8069
1/8" x 36 yd
1/4" x 36 yd
1/2" x 36 yd
1
1
1
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
7628
06951
White
2" x 108'
1
R E C L O S A B L E TA P E S
3M™ SCOTCHMATE™
RECLOSABLE FASTENER
3M™ SEAM SEALER TAPE
• Rubber backed tape designed to duplicate a factory
appearance and function typically found in door jams
and trunk gutters.
• Immediately paintable.
PART NO.
CROSS
REF.
THICKNESS
ROLL SIZE
QTY.
8065
8066
08475
08476
20 mil
20 mil
3/8" x 30'
7/8" x 30'
1
1
• Stick-on version of 3M Scotchmate hook and
loop attachment system.
• Performs well up to 120° F continuously
or 158° F intermittently.
• Engaged thickness: 0.15"
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
8084
06488
White
1" x 5 yd
1
3M™ STRIP-CAULK
• Black, soft, non-hardening caulking material in one-foot
lengths for use in all types of seams, joints and openings.
• Ideal for under-dash repairs to reduce noise, rattles and vibration.
• Will not crack, dry out or
shrink and is waterproof.
• Adheres to metal, paint,
glass, rubber and plastic.
PART NO.
CROSS
REF.
DESCRIPTION
QTY.
7619
08578
(60) 1' Strips per box
1 box
3M™ SCOTCH-MOUNT MOLDING TAPE
• Ideal for attaching vehicle body side moldings, trim and emblems.
• Strong bonding and easy to use.
• Cut to size, no mess.
PART NO.
CROSS
REF.
COLOR
THICKNESS
ROLL SIZE
QTY.
72149
03615
White
7/8"
7/8" x 5'
1
SCOTCH® FINE LINE STRIPING TAPE
• Specially-engineered tape is slit to provide 1/16 inch
and 1/8 inch pull-out pieces for paint striping.
• Polypropylene film works great for multicolor striping.
• Can be applied over freshly painted acrylic
lacquer or enamel surfaces sooner and with
less chance of imprinting.
PART NO.
ROLL SIZE
QTY.
8075
1" x 550"
1
3M™ NAMEPLATE REPAIR TAPE
• Medium-density gray foam tape with high performance acrylic
adhesives on both sides and a red release liner.
• Acrylic adhesive provides an excellent
barrier to water and road dirt.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
71813
06385
Gray
.236 x 5 yd
1
3M™ SCOTCHMATE™
HOOK AND LOOP
FASTENING SYSTEM
• Comprised of two non-woven nylon
strips, one of hook material and
one of loop material.
• Premium performance adhesive system.
• Mated strips.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
7807
06480
Black
1" x 12"
12
3M™ DUAL LOCK™
REUSABLE FASTENER
• Consists of (1) continuous plastic strip
with mushroom shaped stems that are
designed to engage together.
• Provides reclosable fastening.
• Pressure-sensitive adhesive style backing.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
71669-4
86282
Clear
1" x 25'
1
HOOK & LOOP
FASTENER ROLLS
• Pressure sensitive adhesive backing.
• Hook side and loop side are sold
separately.
PART NO.
DESCRIPTION
COLOR
ROLL SIZE
QTY.
7805
7806
Loop Side Dispenser
Hook Side Dispenser
Black
Black
1' x 25 yards
1' x 25 yards
1 box
1 box
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M31
SHOP SUPPLIES
TAPES
D U C T & C L O T H TA P E S
INDUSTRIAL GRADE DUCT TAPE
CLOTH GAFFERS DUCT TAPE
• Cloth duct tape with excellent adhesion to a wide variety of surfaces.
• Highly conformable.
• Used for bus seat repair and wrapping/bundling
wire, pipe, metals, and plastics.
• Moisture and dust proof sealing of equipment
cases and canisters.
• Waterproof with non-reflective backing.
• Vinyl coated cloth tape.
PART NO.
COLOR
ROLL SIZE
THICKNESS
QTY.
7621
7621-4
7684
7622
7622-4
Silver
Silver
Silver
Black
Black
2" x 60 yd
2" x 60 yd
2" x 60 yd
2" x 60 yd
2" x 60 yd
11 mil
11 mil
9 mil
11 mil
11 mil
1
24
1
1
24
HEAVY DUTY INDUSTRIAL DUCT TAPE
• Made of the woven material found in high quality tapes.
• Adhesive backing is extremely durable and long lasting.
PART NO.
COLOR
ROLL SIZE
QTY.
7797
7798
Red
Green
2" x 60 yd
2" x 60 yd
1
1
WATERPROOF SILVER DUCT TAPE
PART NO.
STYLE
ROLL SIZE
QTY.
Vinyl
Cloth
2" x 60 yd
2" x 60 yd
1
1
COLOR
WIDTH
LENGTH
THICK
QTY.
Orange
Green
Green
Gray
Gray
Burgundy
Brown
Brown
Black
Black
2"
2"
3"
2"
3"
3"
2"
3"
2"
2"
60 yd
60 yd
60 yd
60 yd
60 yd
60 yd
60 yd
60 yd
60 yd
55 yd
12 mil
12 mil
12 mil
12 mil
12 mil
10 mil
12 mil
12 mil
9 mil
12 mil
1
1
1
1
1
1
1
1
1
1
ALUMINUM FOIL TAPE
• High tack adhesive that tears straight and easy.
• Seals out moisture.
71670
71671
PART NO.
71700
7784
7812
7785
7801
7786
7787
7810
7614
7813
• High tack adhesive provides excellent adhesion.
• Outstanding weathering ability.
• Extra heavy foil tape.
• Resists high heat.
3M™ DUCT TAPE SILVER
PART NO.
ROLL SIZE
QTY.
71666
72735
2" x 50 yd
3" x 50 yd
1
1
• General purpose grade duct tape.
• Polyethylene coated cloth backing with rubber adhesive.
• Ideal for color coding, sealing, holding, protecting from
moisture, temporary repairs and general maintenance activities.
• Thickness: 10.5 mil
• Maximum Operating Temperature: 200° F.
SEE PAGE I21
Utility Knives
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
8056
06969
Gray
48 mm x 54.8 mm
1
A N T I - S L I P TA P E S
NON-SKID ABRASIVE TAPE
3M™ SAFETY-WALK™
SLIP RESISTANT CONFORMABLE
TAPE AND TREADS
• Adhesive is compatible with most clean surfaces for long life.
• Made from water-proof material.
• Use on stairs, ramps, floors and foot pedals.
• Maximum temperature: 150° F
PART NO.
COLOR
ROLL SIZE
GRIT
QTY.
71701
71702
71703
72709
Black
Black
Black
Black
1" x 60'
2" x 60'
4" x 60'
6" x 60'
80
80
80
80
1
1
1
1
• Ideal for use on diamond grade safety plates,
steps, and other irregular surfaces.
• Mineral coated, slip-resistant with
aluminum foil backing.
• Conforms to irregular surfaces and around edges.
PART NO.
CROSS
REF.
COLOR
ROLL
SIZE
QTY.
8063
19280
Black
2" x 60'
1
NON-SKID ABRASIVE TAPE
• Backing pressure sensitive adhesive.
• Coating material oxide grit.
PART NO.
COLOR
SIZE
QTY.
7780
Black
6" x 2'
50
M32
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
TAPES
S E A L A N T TA P E S
3M™ SCOTCHRAP™ ALL-WEATHER
CORROSION PROTECTION TAPE
• PVC-based tape with a high-tack adhesive provides a corrosion
and impact resistant seal for all-weather protection on pipes,
conduit and fittings, both above and below the ground.
• Excellent UV resistance.
• Temperature rating of 176° F (80° C ).
• Applies over a wide temperature range and is
resistant to impact, abrasion and punctures.
PART
NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
7098
10638
Black
2" x 100'
1
PTFE TAPE
• Fast and easy to apply.
• Economical to use.
• Seals all threaded connections.
• Waterproof and corrosion proof.
PART NO.
ROLL SIZE
QTY.
72710
71665
71699
1/4 x 520" roll
1/2 x 520" roll
3/4 x 520" roll
4
4
2
STAINLESS STEEL GRADE PTFE TAPE
SCOTCH™ 48 THREAD SEALANT TAPE
• High-temperature-stable (PTFE) thread sealant.
• Provides a leak-proof seal with a
temperature rated to 500° F (260° C ).
• Thickness: 3.0 mil.
PART
NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
8064
06195
White
1/2" x 260"
10
• Stainless steel grade with nickel content.
• Designed to perform as a sealant and as an antiseize
with stainless steel and stainless steel alloys.
PART NO.
ROLL SIZE
QTY.
72711
1/2 x 260" roll
1
COAX-SEAL
COLD SHRINK TAPE
• Shrinks around and seals an object without heat,
no need for open flame or a heat gun.
• Ideal for areas where heat or open flame might be hazardous.
• Dielectric strength of 69,000 volts, water absorption 1/2%.
• Excellent for high-voltage insulating applications
for utilities and general MRO as well as automotive
and well as automotive and plumbing.
• Tape has a liner and shelf life of 5 years.
PART NO.
ROLL SIZE
QTY.
71660
1" x 10'
2
• Quickly and effectively seals all types of
coax fittings of all shapes.
• Disconnect fittings and re-seal them with
same materials by reforming plastic.
• Stays flexible at temperatures from
-35° F to 135° F for many years.
• Ensures moisture-proof connections.
PART NO.
ROLL SIZE
QTY.
71618
1/2 x 12' roll
4
SCOTCH® ELECTRICAL MOISTURE SEALANT ROLL
• Protects against common elements.
• Replaces tape and moisture-proof connections.
• All-season, all-weather protection; resists salt water.
• Economical roll form makes up to 60 splices.
• Adds strain relief to the splice.
• Tough vinyl backing prevents abrasion.
• Tested: -30° F. to heat pressure of steam cleaning.
• Application: Wire repair, sealing lights, terminal
block protection, and hundreds of other uses.
3M™ TEMFLEX™
COTTON FRICTION TAPE
• Provides high-grade abrasion protection
for splices and connections insulated with
rubber electrical tape.
• High break strength and low stretch
making it ideal as heavy-duty binding
and harnessing tape.
PART NO.
CROSS
REF.
COLOR
ROLL SIZE
QTY.
PART NO.
CROSS
REF.
ROLL SIZE
QTY.
71648
1755
Black
3/4 x 60'
1
71267
06147
2-1/2 x 10' roll
2
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M33
SHOP SUPPLIES
LUBRICATION
SWIVEL GREASE COUPLERS
BUTTON HEAD COUPLER
GREASE FITTING
90° COUPLER GREASE FITTING
• Spring-loaded sleeve locks coupler in
place for angular application.
• Complete with small and large quickdisconnect adapters to fit standard couplers.
• Maximum operating pressure: 4,500 psi
• Zinc plated.
• Use with button head grease fittings.
• Screws on grease gun hose.
PART NO.
FEMALE
INLET
QTY.
72509
1/8 NPT
1
PART NO.
WORKING
PRESSURE
QTY.
72565
3,000 psi
1
HEAVY-DUTY 360° SWIVEL
COUPLER GREASE FITTING
• Swivels in a full 360° circle and locks in place.
• 45° angle gives easy access to most grease fittings.
• Includes a standard grease coupler and 1/8" NPT female
inlet for easy assembly to standard grease guns.
• For use with air-operated grease guns.
PART NO.
WORKING
PRESSURE
FEMALE
INLET
QTY.
72549
6,000 psi
1/8 NPT
1
180° SWIVEL GREASE COUPLER
• Designed to lock at any angle up to 180°.
• Spring-loaded sleeve locks coupler in place for straight
applications or slides back for angular application.
• Corrosion-resistant finish.
• For hand-operated grease guns only.
• Male inlet.
PART NO.
WORKING
PRESSURE
OVERALL
LENGTH
QTY.
72510
3,000 psi
4"
1
ALEMITE NARROW DIAMETER
360° SWIVEL GREASE COUPLER
• Swivels in a full 360° circle and locks in 8 positions.
• Overall length: 4".
• Has a narrower diameter than the standard.
• 1/8" NPT female inlet for easy
assembly to standard grease guns.
• For use with air operated grease guns.
• Rubber seal.
360° SWIVEL COUPLER GREASE FITTING
• Swivels in a full 360° circle and locks in place.
• 45° angle gives easy access to most grease fittings.
• Includes a standard grease coupler and 1/8" female
inlet for easy assembly to standard grease guns.
• For hand grease gun use only.
PART NO.
WORKING
PRESSURE
FEMALE
INLET
QTY.
PART NO.
WORKING
PRESSURE
FEMALE
INLET
QTY.
72777
10,000 psi
1/8 NPT
1
72518
4,500
1/8 NPT
1
GREASE COUPLERS
PART NO.
APPLICATIONS
RATING
THREAD
SIZE
JAW
BALL
CHECK
DIAMETER
LENGTH
HEX
QTY.
72505
72514
72506
72608
72508
72609
Hand only
Air/Battery/Hand
Air/Battery/Hand
Air/Battery/Hand
Air/Battery/Hand
Air/Battery/Hand
4,500 psi
5,000 psi
5,000 psi
6,000 psi
8,000 psi
10,000 psi
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
4
4
4
4
3
4
Yes
No
Yes
Yes
Yes
No
.590
.593
.593
.562
.634
.589
1.5
1.5
1.5
1.5
1.92
1.5
n/a
5/8
5/8
1/2
11/16
N/A
2
2
2
2
2
2
#72505 & #72514
#72608 & #72609
#72506 & #72508
M34
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LUBRICATION
GREASE HOSES
HIGH PRESSURE GREEN HOSE
• 12" flexible hose assembly with or without adapter.
• Use with air-operated grease gun.
• 1/8" NPT end.
#72511
PART NO.
DESCRIPTION
WORKING
PRESSURE
BURST
PRESSURE
QTY.
72511
72512
With Adapter
Without Adapter
5,000 psi
5,000 psi
20,000 psi
20,000 psi
1
1
#72512
GREASE HOSE
• For hand-operated grease guns only.
• 1/8" NPT end.
PART NO.
LENGTH
WORKING
PRESSURE
QTY.
72503
72504
12"
18"
4,500 psi
4,500 psi
1
1
GREASE HOSE WITH SPRING GUARD
• Hose Size: 3/16"
• Hose Material: neoprene
• Spring guard for secure grip on coupler end.
• 1/8" NPT heavy-duty brass male thread fittings on both ends.
• For hand operated applications only.
• Caution: Not suitable for power operated lube.
PART NO.
LENGTH
MAXIMUM
WORKING
PRESSURE
72546
72547
1
1
4,500 psi
4,500 psi
MAXIMUM
OPERATING
PRESSURE
MAXIMUM
BURST
PRESSURE
QTY.
3,000 psi
3,000 psi
12,000 psi
12,000 psi
12"
18"
GREASE HOSE ACCESSORIES
HIGH PRESSURE SWIVEL
COUPLER GREASE FITTING
GREASE INJECTOR NEEDLE
• Lubricates in very tight places, such as universal joints and sealed bearings.
• Stainless steel 18 gauge x 1-1/2" long needle.
• Equipped with standard grease fitting and protective plastic holder.
• For hand-operated grease guns only.
• Swivel can be used with most airoperated grease guns.
• For use with High Pressure Grease
Guns, Part No. 72530 and 72538.
PART NO.
WORKING
PRESSURE
FEMALE
INLET
MALE
INLET
QTY.
72513
72539
7,125 psi
6,000 psi
1/4 NPT
1/4 NPT
1/8 NPT
1/4 NPT
1
1
PART NO.
QTY.
72545
1
SEE PAGE K2
GREASE ADAPTER NEEDLE
• Converts jaw-type lube couplers to steel needle points.
• Includes both small and large sleeves to fit all standard couplers.
• For hand-operated grease guns only.
PART NO.
OVERALL
LENGTH
TIP
DIAMETER
BODY
DIAMETER
QTY.
72567
7-1/8"
0.046"
0.25"
1
Nitrile Gloves
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M35
SHOP SUPPLIES
LUBRICATION
GREASE GUNS
PISTOL GRIP GREASE GUN
PART NO.
DESCRIPTION
QTY.
72502
72562
Pistol Grip Grease Gun
Grease Gun with 12" flex hose
1
1
#72502
#72562
• Four-jaw coupler.
• One piece, zinc die-cast body.
• Working Pressure: 6,000 psi
• Uses standard 14 oz cartridge, or use the filler nipple for loading from bulk supply.
HIGH PRESSURE GREASE GUN
• For use with high pressure grease systems (7,125 psi).
• Solid steel and aluminum handle.
• Press trigger to obtain continuous grease flow.
• Grease inlet accepts 1/4" NPTM thread.
PART NO.
DESCRIPTION
QTY.
72530
72538
72513
Grease Gun with Swivel 1/4 MNPT x 1/2-27 MNPT
Grease Gun with No Swivel
Swivel 1/4 NPT (F) x 1/8 NPT (M)
1
1
1
#72538
#72530
WORKFORCE® PRO PISTOL
GRIP GREASE GUN
MINI PISTOL GRIP GREASE GUN
• Compact and lightweight.
• Pistol grip for easy, one-handed operation.
• Perfect for hard to reach jobs.
• Heavy-duty special LuCast™ cast alloy head.
• Can fill with standard cartridges or bulk fill.
• Outputs 1.5 oz (43 g) of grease per 100 strokes.
• Contoured lever develops more pressure with less effort.
• Ergonomically designed T-handle provides positive grip.
• Non-drip seal on grease coupler to prevent leakage.
• Extension Pipe: 4"
• Lock-n-Load™ threadless quick connect barrel
• Automatic Bleeder - Bleeds air when reconnecting barrel
to head. Reduces air locks and priming problems
• Heavy duty cast aluminum pump head for maximum
durability and longer service life.
• Three way loading: bulk, filler nipple, or cartridge.
• 12" flexible extension for hard to reach grease fittings.
• Four-jaw super grip coupler, with ball check, for better
grip and extended service life.
• Variable stroke allows the user to increase the pressure
output on demand.
• Heavy gauge knurled steel barrel for better grip and
ergonomic handle design.
PART NO.
INLET
QTY.
72528
1/8" NPT
1
PART NO.
72515
6637
DESCRIPTION
QTY.
Grease Gun with 4" extension
pipe and 3 oz Cartridge
3 oz Lithium Grease Cartridge
1
3
GREASE GUN WITH 18" FLEX HOSE
• Develops up to 7,000 psi (480 Bar).
• Equipped with air bleeder valve to release trapped air.
• Filler nipple with ball check for
use with grease filler pump.
• Complete with hardened four-jaw, hydraulic
couplers with ball check and non-drip cap.
• Extension Pipe: 4" (100 mm)
M36
CALL
1-800-558-2808 /
FAX
PART NO.
DESCRIPTION
QTY.
72542
Grease Gun with 18" Flex Hose
and 4" Extension Pipe
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LUBRICATION
GREASE GUNS
GREASE GUN
• Can fill with standard cartridges or bulk filled.
• Outputs 5.2 oz (150 g) of grease per 100 strokes.
• Contoured lever: Develops more pressure with less effort
• Complete with hardened four-jaw hydraulic coupler with
ball check and non-drip cap.
PART NO.
DESCRIPTION
QTY.
72566
Grease Gun with 6" (150 mm)
Extension Pipe
1
PROFESSIONAL LEVER
ACTION GREASE GUN
• Develops up to 10,000 psi (690 bar).
• Can fill with standard cartridges, suction, or bulk filled.
• Equipped with air bleeder valve to vent air pockets and
filler nipple with ball check for use with grease filler pump.
• Complete with hardened four-jaw, hydraulic
coupler with ball check, non-drip cap.
PART NO.
DESCRIPTION
QTY.
72561
Grease Gun 6" (150 mm)
Extension Pipe
1
DUAL-PISTON AIR OPERATED GREASE GUN
• Cycles continuously with high pressure delivery:
dispenses 1 tube of grease in less than a minute.
• Dual-piston gear motor provides constant torque: enables
user to speed up lubrication and control the volume of grease
without compromising pressure.
• Requires only 40-60 psi air at 3.5 cfm.
• 6000 psi / 413 bar output pressure capability.
• Includes safety trigger lock, air bleeder valve, filler valve,
anti-fatigue strap, and adjustable hose holder.
• Three-way loading - cartridge, bulk or pump.
PART NO.
INLET
OUTLET
QTY.
72622
1/4" NPT
3/8"-32 UNEF
1
AIR OPERATED GREASE GUN
• Output 3.5 oz of grease per 100 strokes.
• Can fill with standard cartridge, suction, bulk fill.
• Working air pressure is 60–90 psi.
• Maximum operating pressure is 3,000 psi.
• Equipped with air bleeder valve to release trapped air.
• Includes filler nipple with ball check for use with grease
filler pump.
• Complete with four-jaw hydraulic coupler, non-drip cap,
and 6" extension pipe.
PART NO.
INLET
OUTLET
QTY.
72564
1/4" NPT
1/8" NPT
1
CORDLESS GREASE GUN
• The strongest of any gun available, powered by an 18 volt battery.
• Heavy-duty motor delivers over 7,500 psi.
• Ergonomically balanced to minimize operator strain.
• Kit includes:
(1) heavy-duty plastic storage case
(2) 18 volt rechargeable NiCad batteries
(1) one-hour charger
(1) 42" flexible hose
(1) coupler with durable bend restrictors
(1) carrying strap
(1) easy-to-follow user manual
PART NO.
DESCRIPTION
QTY.
72614
72615
18 V NiCad Replacement Battery
One Hour Quick Charger 110 V
1
1
SEE PAGE L54-L55
Greases
CONNECT WITH IMPERIAL SUPPLIES
M37
SHOP SUPPLIES
MAINTENANCE TOOLS
HAND OILERS
PISTOL PUMP OILERS
#72600
#72603
• All steel body—double seamed base.
• Flared or wide base for added stability.
• Zinc die-cast high-pressure pump with a
heavy-duty precision-ground piston.
• High volume of fluid delivered with each stroke.
• Oiler stays primed for instant use.
SPRAY TIP OILER
• Nozzle adjusts from a fine mist
spray to a thin stream.
• Used for covering wide and hard to reach areas.
• Remains primed and ready to use.
• Sprays all solvents: insecticides, light lubricants
• Wide base.
PART NO.
SPOUT
SIZE
QTY.
PART NO.
SPOUT
SIZE
QTY.
72600
72603
72602
72604
Rigid
Flex
Rigid
Flex
6 oz
6 oz
10 oz
20 oz
1
1
1
1
72605
Rigid
10 oz
1
#72611
#72604
#72602
INDUSTRIAL PUMP OILERS
• Drawn steel container with a double seamed base.
• Zinc die cast, high pressure pump with ruggedly
constructed precision ground piston.
SPRING BOTTOM OILERS
• Spring steel bottoms are double seamed.
• Filler openings are rolled thread for leak-proof body.
PART NO.
DESCRIPTION
QTY.
72607
12 oz Rigid Spout
1
PART NO.
DESCRIPTION
QTY.
72610
72611
12 oz Rigid Spout
12 oz Flex Spout
1
1
SEE PAGE K44-K47
#72610
SEE PAGE K2
Sorbents & Spill Control
Disposable Nitrile Gloves
TOOL BOXES & STORAGE
SOFT SIDE TOOL BAG
PLASTIC TOOL BOX
• Padded reinforced web carrying handle and
adjustable shoulder strap.
• Heavy-duty stitching and bar
tacking at all stress points.
• Pockets: 17
• Material: Polyester
• Dimensions: 18" W x 7" H x 9" D
• Color: Blue/Black
• Removable plastic tray.
• Positive locking latch.
• Dimensions: 14-1/2" L x 7-1/2" W x 5-1/4" D
• Color: Gray
PART NO.
QTY.
816
1
PART NO.
QTY.
813
1
PLASTIC TOOL BOX
PLASTIC TOOL BOX
• Removable plastic tray
• Dimensions: 16" W x 7-5/8" H x 7-1/2" D
• Color: Black lid, yellow box
• Removable plastic tray.
• Two steel latches.
• Dimensions: 13" W x 5-1/2" H x 6-1/2" D
• Color: Black lid, yellow box
PART NO.
QTY.
819
1
M38
CALL
1-800-558-2808 /
FAX
PART NO.
QTY.
812
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
MAINTENANCE TOOLS
FUNNELS & FILLERS
METAL FUNNEL
PLASTIC RADIATOR CAN
• Transmission funnel filter.
• Rugged epoxy finish.
• Offset design.
• 17" flexible extension.
• Includes fine mesh strainer screen.
• Overall Length: 28"
• Impervious to oil, gasoline and antifreeze.
• Durable polyethylene material won't
damage automotive finishes.
• Unique spout design helps prevent spillage.
• Color will vary.
PART NO.
FUNNEL
DIAMETER
CAPACITY
QTY.
72601
7"
2 quart
1
PLASTIC FUNNEL WITH REMOVABLE
FLEX SPOUT STRAINER
• Resistant to oil and most chemicals.
• Funnel Depth: 6"
• Includes detachable flex spout and
removable brass strainer.
PART NO.
FUNNEL
DIAMETER
CAPACITY
QTY.
72552
6"
1.5 qt
1
PART NO.
CROSS
REFERENCE
CAPACITY
QTY.
72594
LX-1624
2.5 gal
1
BATTERY FILLER
• Shuts off automatically when battery
cell is at proper level, no over filling.
• Double action fast flow valve tip prevents after-drip.
• Stops surface discharge caused by a wet battery.
• Tough polyethylene is safe to use with battery acid.
PART NO.
CROSS
REFERENCE
QTY.
72560
75-030
1
PLASTIC FUNNEL WITH STRAINER
• Resistant to oil and most chemicals.
• Funnel Depth: 6"
• Includes removable steel strainer.
FLEX SPOUT MEASURE CAN
PART NO.
FUNNEL
DIAMETER
CAPACITY
QTY.
72551
6"
1.5 qt
1
PLASTIC FUNNEL
• Resistant to oil and most chemicals.
• Holds 12 oz.
• No Strainer.
PART NO.
FUNNEL
DIAMETER
CAPACITY
QTY.
72553
4-3/4
12 oz
2
• Capacity: 1 quart
• Marked in quarts and liters.
• Flexible spout.
• Includes leak proof thread-on lid.
• Includes thread-on outlet cap.
• Spout included within can.
PART NO.
CAPACITY
QTY.
72689
1 quart
1
DISPENSER WITH LID AND CAP
MEASURER WITH
FLEXIBLE SPOUT
• Transparent polyethylene.
• Use with water, oil, mild
acids, or solvents.
• Comes with rigid and flexible spout.
PART NO.
CAPACITY
QTY.
72595
72596
72597
1 quart
2 quart
1 gallon
1
1
1
• Includes spout cap and lid to keep out contaminants.
• Works great to transport bulk oil.
• Translucent polyethylene material enables the user to
read the oil level on the container.
• Marked in both quarts and liters.
• Gray.
• Flexible, removable 8" pouring spout enables easy
transfer of liquid.
PART NO.
CAPACITY
QTY.
72734
8 quart
1
RADIATOR FILLER
• 1/4" NPT female.
• Flexible polyurethane hose.
• Immune to oil and grease.
• Sturdy brass stem.
• Self-adjusting U-cup
eliminates leakage.
PART NO.
NPT
THREAD
QTY.
92525
1/4"
1
SYRINGE BATTERY FILLER
• Ideal for all fluids, including battery acid.
• Rubber bulb remains pliable in cold weather.
• 6" flexible spout.
PART NO.
CAPACITY
QTY.
72574
6 oz
1
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M39
SHOP SUPPLIES
DRUM & BARREL PUMPS
DRUM & BARREL PUMPS
BARREL PUMPS
POLYPROPYLENE HAND PUMP
15-55 GALLON DRUMS
• Fits 15 through 55 gallon drums with 2" bung opening.
• This zinc plated pump has steel pistons
and brass piston rings.
• Pump is designed for lighter liquids.
• Curved discharge spout has male garden hose threads.
• Included with the pump is a telescoping suction
tube with neoprene seals.
• Suitable for 30 weight oil.
• Not suitable for water-based products.
• Fits 15 through 55 gallon drums
with 2 inch bung opening.
• Polypropylene pump has stainless steel pistons.
• Telescoping suction tube included.
• Pump is designed for water based fluids,
chemicals, and acids.
• Compatible with DEF Fluid.
PART NO.
QTY.
72529
1
PART NO.
QTY.
72520
1
T-HANDLE BARREL PUMP
• Can be used with oil-based fluids and solvents.
• Die cast head with garden hose threads.
• 18 gauge steel cylinder.
• Fits 30 to 55 gallon drums.
• Comes complete with a curved metal spout
and bung adapter to fit standard barrels.
• Primary Applications: Oil Based Fluids
• DO NOT USE with water based fluids, weak acids,
weak acids, antifreeze, or gasoline/diesel fuel.
PART NO.
CROSS REF.
QTY.
72525
55-017
1
ROTARY HAND PUMP
• Heavy cast iron pump.
• One complete rotation dispenses one quart.
• Rack and pinion design allows for easy calibration.
• Includes swing return drain tube and
telescoping suction pipe.
• For light oil and fuel applications only.
PART NO.
QTY.
72544
1
MANUAL BARREL PUMPS
#72522
• Polypropylene pump without hose
• Fits 15 through 55 gallon drums with 2" bung opening.
• Constructed of polypropylene and nickel plated steel.
• Includes bung adapter and discharge spout.
• Dispenses approximately 8 oz per stroke.
• Use Part No. 72522 for weak acids, anti-freeze,
detergents and windshield washer fluid.
• Use Part No. 72523 for paint thinner and general solvents.
PART NO.
CONSTRUCTION
QTY.
72522
72523
Polypropylene and nickel plated steel
Nylon and nickel plated steel
1
1
SEE PAGE K44-K47
Sorbents & Spill Control
#72523
PLEWS® HAND ROTARY
BARREL PUMP
PAIL PUMP
• For transferring non-corrosive petroleum based fluids,
of light to medium viscosity, at a rate of approximately
one gallon per 18 revolutions with SAE 10 oil.
• Single direction, two valve pump.
• Use with oil-based fluids.
• Cast iron housing and 4211 steel suction pipe.
• Includes pump, pail cover and 4
feet of clear vinyl hose with curved
discharge nozzle.
• Variable stroke handle delivers
1 to 2.3 ounces per stroke.
• Recommended for oil and gear
lube up to 140 lb.
PART NO.
FITS
QTY.
72521
5 to 6-1/2 gal pail
1
M40
CALL
1-800-558-2808 /
FAX
PART NO.
CROSS REF.
QTY.
72524
55-303
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
DRUM & BARREL PUMPS
DRUM & BARREL ACCESSORIES
GREASE PUMP
BEARING PACKER
• Quick connect feature makes different
grease transfer jobs such as filling grease
guns or packing bearings fast and easy.
• Designed for 35 lb pails.
• Includes universal grease gun filler nipple
to fit all grease gun models.
• Bearing packer holds bearings up to 6"
in diameter and includes dust cover.
PART NO.
QTY.
72563
1
BARREL FAUCET
• Polyethylene bung faucet.
• Fits 2" opening.
• Chemical resistant.
• Empties 55 gallons in three minutes.
• Instant on/off control.
PART NO.
QTY.
72573
1
BARREL FAUCET
BARREL PUMP THREAD ADAPTER
• Bung thread to buttress thread.
• Convert 2" bung adapters to fit on
plastic drums or pails.
• Use with plastic drums.
• Made of chemical resistant material.
PART NO.
QTY.
72571
1
• Polyethylene bung faucet.
• Fits 3/4" NPT bung opening.
• Chemical resistant.
• Instant on/off control.
PART NO.
QTY.
72572
1
DRUM WRENCH
SAFETY BARREL FAUCET
• Durable aluminum construction permits use with hazardous materials.
• Can be used on either plastic or metal bungs - 3/4" to 2".
• Lightweight.
• Internal flame arrestor.
• FM-approved for non viscous liquids.
• For steel or plastic drums.
PART NO.
QTY.
PART NO.
INLET
QTY.
87900
1
92523
3/4 MNPT
1
How to Download
the Imperial App.
Simply visit your app store on your
iOS or Android device and search
for 'Imperial Supplies'.
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M41
SHOP SUPPLIES
LEAK DETECTION
LEAK FINDING KIT
• For finding all refrigerant and fluid leaks.
KIT CONTAINS:
(1) Optimax LED Flashlight, AC Charger
(1) Fluorescence-enhancing Glasses
(1) Glow-Away Dye Cleaner, 8 oz
(1) All-In-One Dye, 8 oz
(1) Dye-Lite, 8 oz
(2) EZ-Ject Universal
Dye Cartridges, 1/2 oz
(1) EZ-Ject Dye Injector
(1) AC&R hose – R-134a
(1) R-12 Adapter/Purge Fitting
(1) Plastic Storage Case
PART NO.
QTY.
7770
1
LEAK FINDING DYE FOR AIR CONDITIONING SYSTEMS
• Universal dye for all refrigerant systems.
• Dye can remain in the system without fear of damage to the system.
• For easy dispensing, use Injector, Part No. 7793 and Injector Hose, Part No. 7794.
• How It Works:
»A small amount of fluorescent dye is added to a vehicles A/C system and allowed to circulate.
»The dye escapes with the system's refrigerant and remains at all leak sites.
»When the system is scanned with a ultraviolet or UV/Blue light inspection lamp, the dye fluoresces a
brilliant yellow-green to pinpoint the exact source of every leak.
»To check repairs, the residual dye is removed from the leak site with a degreaser. Run the system to
re-inspect the repair sites for additional leaks. No glow means all the leaks are repaired.
PART NO.
NET WEIGHT
QTY.
7811
1 oz
6
BIG EZ DYE INJECTION SYSTEM
• Use with the air conditioning cartridge.
• Provides more control for dispensing A/C dye.
• Less chance of the dye leaking from cartridge.
• Hose includes a R134a coupler and R12/purge fitting - Low Side.
PART NO.
DESCRIPTION
QTY.
7793
7794
Injector
Injector Hose
1
1
#7793
#7794
OPTIMAX™ 3000 LED LEAK DETECTION FLASHLIGHT
• 15 times brighter than regular LED lights.
• Power comparable to super high intensity 150 watt lamps.
• Compatible with standard leak detection dyes.
• Kit Includes:
»Rechargeable NiMH battery
»AC charger
»Fluorescence-enhancing glasses
PART NO.
QTY.
7799
1
M42
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
LEAK DETECTION
DYE-LITE® ALL-IN-ONE™
FULL SPECTRUM DYE
SUGGESTED DILUTION RATIOS
• For use on all oil-based fluids.
• Turns yellow-green under both ultraviolet and blue lights.
• For gasoline engine oil, diesel engine oil, gasoline, diesel
fuel, automatic transmission fluid, power steering fluid
and standard hydraulic and lubrication fluids.
PART NO.
NET WEIGHT
QTY.
7790
7788
16 oz
1 oz
1
6
DYE-LITE® LEAK FINDING
DYE FOR ENGINE COOLANT
FLUID
ATE
CONCENTR
ATE
PART NO.
NET WEIGHT
QTY.
16 oz
1 oz
1
6
FLUID
HOW MUCH TO USE
1 oz per 4 gal
REFRIGERANT PAG OIL - 150
• Formulated for the quick and easy site detection of gas
leaks and air leaks.
• Water-based formula contains no oils, silicones or
harmful solvents.
• Primary Applications: Refrigeration units, air
conditioning systems, exhausts, pipes, valves, screw
connectors, welding seams, and compressors.
• Description: 150 cSt viscosity
• Use with Injector, Part No. 7793.
NET WEIGHT
QTY.
6700
11 oz
12
1 oz per 4-6 gal
1 oz per 4-6 qt
Engine Coolant
CRC® LEAK DETECTOR
PART NO.
1/2 oz per 4-6 qt
1/2 oz per 4 qt
1/2 oz per 4 qt
1 oz per 12 qt
1 oz per 12-18 gals
SUGGESTED DILUTION RATIOS
CONCENTR
• Leak detection dye for all engine
coolants and auto body leak checks.
• Works with any leak detection inspection lamps.
7791
7789
HOW MUCH TO USE
Engine Oil
Gasoline
Diesel
Power Steering
Automatic Transmission
Fuel (Gasoline & Diesel)
Hydraulics (Petroleum-Based)
Light to Medium - Colored
Very Dark or Intensely Blue
PART NO.
SIZE
QTY.
7808
8 oz
1
LEAK FINDING DYE FOR
AIR CONDITIONING SYSTEMS
• Multi-dose cartridge with universal dye for
all refrigerant systems.
PART NO.
NET WEIGHT
QTY.
7792
4 oz
1
JOHNSON'S® ESTER LUBRICANT
WITH UV DYE
• Premium synthetic polyol ester (POE) lubricant formulated with
a proprietary additive package and SAE-approved UV dye.
• For fast and efficient air conditioning leak detection.
PART NO.
NET WEIGHT
QTY.
5562
8 fl oz
12
Taylor
Sales Manager
JOHNSON'S® PAG LUBRICANT
WITH UV DYE, ISO 150
• Three different viscosity grades of premium polyalkylene glycol
(PAG) lubricants formulated for R-134a A/C systems.
• An SAE-approved UV dye is included to make air conditioning
leak detection fast and efficient.
PART NO.
NET WEIGHT
QTY.
5564
8 fl oz
12
Involved…
“I know my customers well. I
understand their businesses and
their needs. It helps me do the
job better.”
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M43
SHOP SUPPLIES
PARTS WASHING
OZZYJUICE® SW-3 TRUCK GRADE SOLUTION
OZZYBOOSTER™ MICROBIAL ENHANCER
• Neutral pH mixture of emulsifiers and surfactants containing no VOC's or solvents.
• Biodegradable, non-toxic, non-caustic, nonflammable, non-hazardous oil
dispersant and degreaser.
• Does not contain any known carcinogens, non OSHA or DOT regulated chemicals,
no ingredients requiring SAEA Title III reporting, and no items on the CERCLA
hazardous substance list.
• Efficient cleaner on:
» Motor oil bearing grease, automotive grease,
impacted grease, creosote and resin products.
» Hydraulic fluid, transmission fluid and crude oil.
» 5th wheel grease, solder/flux and animal fat.
• Appearance: Clear freely flowing liquid
• Odor: Low
• Density: 1.0136g/ml
• pH: 7.3
• Flash Point: None
• Enhances or boosts microbial activity in the
SmartWasher system, broadening the available
territory in which Ozzys can breed and eat.
• Add when overused parts washing machine needs a boost.
PART NO.
SIZE
QTY.
85611
5 gal
1
PART NO.
SIZE
QTY.
85618
4 oz
1
FL-3 SINGLE LAYER OZZYMAT™
• Designed to introduce microbes (Ozzys) into the SmartWasher System, a patented
process and to help reduce excess clogging during its 30 days use.
• Must be changed monthly which will keep the microbe colony healthy and keep your
SmartWasher System working at peak performance.
• Designed for applications with normal to heavy usage.
• Made up of (1) white layer and (1) blue layer. White layer on the mat is designed
to trap any particulate larger than 50 Microns. Blue layer provides support for the
microbes located in the mat. These microbes migrate from the OzzyMat™ into the
OzzyJuice®, located in your SmartWasher tank and break down hazardous waste.
PART NO.
SIZE
QTY.
85612
12" x 21"
1
OZZYJUICE® SW-4 HEAVY-DUTY
DEGREASING SOLUTION
• Approved by AQMD in California as a Clean Air
Solvent because it has virtually no VOCs.
• Carries the NSF mark.
• Can be used on food handling equipment.
• More aggressive on synthetic greases.
• Stable over a wide range of temperatures.
• Color: Semi-Transparent Tan
PART NO.
SIZE
QTY.
85617
5 gal
1
FL-4 MULTI-LAYER OZZYMAT™
• Designed to introduce microbes (Ozzys) into the SmartWasher system, a patented
process and to help reduce excess clogging during its 30 days use.
• Must be changed monthly which will keep the microbe colony healthy and keep your
SmartWasher system working at peak performance.
• Designed for applications with Normal to Heavy Usage.
• Made up of (4) white layers and (1) blue layer. White layers on the mat trap any
particulate larger than 50 microns and should be peeled away once a week for
optimum performance. Blue layer is the support structure that contains the microbes
and delivers them into the system. These microbes migrate from the OzzyMat™ into
the OzzyJuice®, located in your SmartWasher tank and break down hazardous waste.
OZZYJUICE® SW-7 PARTS /
BRAKE CLEANING SOLUTION
• Biodegradable.
• Non-toxic, non-caustic, non-flammable and
non-hazardous oil dispersant and degreasing fluid.
• The SW-7 formula contains no OSHA or DOT
regulated chemicals,no ingredients requiring
SARA Title III reporting, and no items on the
CERCLA hazardous substance list
• Primary Applications: crude oil, hydraulic transmission fluid, motor oil, solder
and flux, bearing grease, automotive grease, resin products, fifth wheel grease,
creosote, impacted grease, automotive varnish and burned on carbon.
PART NO.
SIZE
QTY.
85616
5 gal
1
M44
CALL
1-800-558-2808 /
FAX
PART NO.
SIZE
QTY.
85613
12" x 21"
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
PARTS WASHING
BIO-CIRCLE IMMERSION CLEAN BOX
CB 100 CLEANER/DEGREASER
• Convenient easy to use box for cleaning by
immersion application or drying of small and
medium sized parts.
• Made of robust and resistant plastic and is
compatible with all aqueous cleaners and
degreasers such as CB 100
• Ideal for pre-soaking parts with the most tenacious
contaminants prior to cleaning with the Bio-Circle
Parts cleaning system
• Water based cleaner and degreaser
• Removes greases, stubborn ink, rubber marks, tar, wax,
carbon, soot, pastes, etc.
• Compatible with steel, stainless steel, aluminum,
non-ferrous metals and more.
PART NO.
QTY.
87003
1
BIO-CIRCLE ANGLED FLOW THROUGH BRUSH
• Used with Bio-Circle Parts Washer.
PART NO.
QTY.
87004
1
PART NO.
SIZE
QTY.
87200
1 gallon
1
BIO-CIRCLE CB-100 EMPTY TRIGGER BOTTLE
• High quality, resistant trigger.
• Bottle clearly identified with the CB-100 label showing product
features and directions for use.
PART NO.
QTY.
3372
1
B’LASTER® PARTS WASHER SOLVENT
NEUTRALIZER
• Cuts through cutting oil, water-soluble oil,
motor oils and grease.
• Safe to use on all metals, most
plastics and painted surfaces.
• Leaves no residue.
• High flash point formula 142° F.
• Contains no chlorinated solvents.
• Smelly parts or not changing your OzzyMat™ on time
can sometimes cause an odor in your SmartWasher®.
• The simple solution to this predicament is our greenapple scented neutralizer.
• Just add (1) 4 oz. container directly into the
SmartWasher to make odors disappear.
PART NO.
NET WEIGHT
QTY.
5520
1 gal
4
PART NO.
SIZE
QTY.
85623
4 oz
1
PARTS CLEANING BRUSH
• Stiff nylon bristles are chisel
trimmed for good cleaning action.
PART NO.
DIAMETER
BRISTLES
LENGTH
QTY.
82210
1"
Nylon
2-3/4
1
Save time reordering the products your shop needs.
Visit imperialsupplies.com and try Auto-Reorder today.
CONNECT WITH IMPERIAL SUPPLIES
M45
SHOP SUPPLIES
HAND TOOLS
TA P E D I S P E N S E R S
ELECTRICAL CONNECTION TOOLS
TRUCK-LITE® ELECTRICAL
CONNECTION BRUSH KIT
CARTON SEALING TAPE DISPENSER
• Heavy-duty pistol grip dispenser for
2" wide carton sealing tape.
PART NO.
QTY.
7625
1
• Use to clean termination points on lights and pigtails.
• Small brushes have bronze wire
bristles that won’t harm terminals.
• Large brush has stainless steel bristles
for battery terminals.
PART NO.
CROSS REF.
QTY.
81159
97025
1
B O LT C U T T E R S
MAGNETIC PICKUPS
BOLT CUTTER
• Heavy duty.
• Full 36" length.
• Replaceable jaws,
part number 6449.
• All steel construction.
• Rubber cushion grips.
• Adjustable cutting edges.
PART NO.
QTY.
6448
1
PERMANENT RARE EARTH
MAGNETIZED WAND
• The wands powerful magnet quickly and safely picks up
metal chips, fasteners, nuts, bolts and more.
• Simply wave wand over debris and release by pulling the knob.
• Magnetic strength: 15 lb
PART NO.
LENGTH
DIAMETER
QTY.
82345
15-3/5"
1"
1
CABLE CUTTERS & CRIMPERS
HEAVY DUTY CABLE SHEARS
• Circular cable cutter gives a perfect cut, leaving no blunt ends.
• Maximum cable size space: 3/16"
PART NO.
QTY.
71901
1
MAGNETIC SWEEPER
• 24" sweeping width.
• Magnet will pick up 7.5 lb of 8-penny nails, about 680 pieces.
• Easy to operate over most terrain.
• Light aluminum housing.
• Wheel diameter: 6"
WIRE ROPE CRIMP
SLEEVE SWAGING TOOL
• One tool for all your crimp sleeve swaging needs.
• Swags 1/16", 3/32", 1/8", 5/32" and 3/16" crimp sleeves.
• Tool includes a built-in cutter head
PART NO.
QTY.
24609
1
PART NO.
QTY.
82346
1
HOSE CUTTER
MULTI-CUTTER
• Tempered Swedish steel blade housed within a metal body and finished with
powder coating for protection and durability.
• Handles are PVC coated to provide an easier grip.
• Can be used to cut the following:
» Heater hose
» Fuel line hose
» Non-metal air brake hose
» Windshield channeling
» Rubber
» Any plastic hose up to 1-1/8" O.D.
PART NO.
DESCRIPTION
QTY.
71544
71545
Multi-Cutter
Replacement Blades
1
2
M46
CALL
1-800-558-2808 /
FAX
MAGNETIZER
MAGNETIZER / DEMAGNETIZER
• Super C8 magnets.
• Magnetize tools and parts or
demagnetize as needed.
• No batteries required.
PART NO.
QTY.
82347
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
HAND TOOLS
CHEMICAL TESTING INSTRUMENTS
REFRACTOMETER - BATTERY & COOLANT CHECKER
REFRACTOMETER - ETHYLENE GLYCOL
• Measure the freezing point of ethylene glycol and propylene glycol.
• Test battery acid charge.
• Rugged, drop-tested daylight plate.
• Magnified scale for precise readings.
• All-metal construction.
• Ethylene Glycol Scale: -84 F to 32 F
• Propylene Glycol Scale: -60 F to 32 F
• Replacement lens available. Part No. 5975.
• Measure the freezing point of ethylene glycol only.
• Single scale prevents incorrect reading.
• Automatic temperature compensation eliminates variations due to ambient changes.
• Includes sample dropper and adjustment screwdriver.
• Rugged, drop-tested lens.
• Magnified scale for precise readings.
• All-metal construction.
• Scale: -84° F to 32° F
• Comes in a padded case.
PART NO.
QTY.
5955
1
PART NO.
QTY.
5982
1
REFRACTOMETER - BATTERY & COOLANT CHECKER
• Scale measures specific gravity of battery fluid and measures the freezing temperature
of anti-freeze.
• Measures both ethylene glycol and propylene glycol.
• Adjustable eyepiece to focus in on the reading.
• One-year manufacturer's warranty against defects.
• Reads in Fahrenheit for:
»Ethylene glycol: -60°F to 32°F
»Propylene glycol: -50°F to 32°F
• Calibration is done with water.
• Compact and easy to carry
PART NO.
QTY.
5987
1
REFRACTOMETER - DIESEL EXHAUST FLUID
• Measure the Urea/water concentration of diesel exhaust fluid.
• Single scale prevents incorrect reading.
• Required concentration of 32.5% is highlighted on scale.
• Automatic temperature compensation eliminates variations due to ambient changes.
• Includes sample dropper and adjustment screwdriver.
• Rugged, drop-tested lens.
• Magnified scale for precise readings.
• All-metal construction.
• Scale: 0% to 35%
• Comes in a padded case.
PART NO.
QTY.
5983
1
REFRACTOMETER - ETHYLENE GLYCOL TESTER ONLY
• Measure the freezing point of ethylene glycol only.
• Single scale prevents incorrect reading.
• Rugged, drop-tested daylight plate.
• Magnified scale for precise readings.
• All-metal construction.
• Scale: -80° F to 32° F
• Automatic temperature compensation
eliminates variations due to ambient changes.
• Replacement lens available. Part No. 5975.
PART NO.
QTY.
5976
1
REFRACTOMETER - REPLACEMENT LENS
• Replacement lens for refractometers:
»Part No. 5982 Refractometer Ethylene Glycol Tester
»Part No. 5983 Refractometer Diesel Exhaust Fluid Tester
• Replacement lens for refractometers:
»Part No. 5976 Refractometer Ethylene Glycol Tester
PART NO.
QTY.
1
DROPPER FOR RERACTOMETER
• Replacement dropper for refractometers.
• Capacity: 1.5 mL
• Length: 11.6 cm
• Material: Low Density Polyethylene
QTY.
1
DIGITAL REFRACTOMETER – ETHYLENE GLYCOL
REFRACTOMETER - REPLACEMENT LENS
5975
PART NO.
5983-1
• This refractometer can be used for measuring concentration and freezing
temperature (°F) of ethylene glycol solutions that are used as coolant,
antifreeze, deicing, or anti-icing mixtures.
• Measurements in 3 seconds.
• Calibration with water only.
• Requires only a few drops of samples.
• Highly water-resistant, ergonomically designed for one hand operation.
• Includes: Protective case and owner's manual.
• Powered by two, AAA batteries (not included).
• Approximately 11,000 measurements per battery life
(when alkaline batteries are used).
• EG Concentration: 0.0 - 90.0% ± 0.4% (resolution 0.2)
• EG Freezing Point: 32 to -60°F ± 1.0 (resolution 1.0)
• ATC (Automatic Temperature Compensation) 50 to 104°F
(10 to 40°C).
PART NO.
QTY.
PART NO.
QTY.
5983-2
25
5986
1
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M47
SHOP SUPPLIES
HAND TOOLS
WIRE STRIPPERS & CRIMPERS
B U TA N E T O R C H E S & H E AT G U N S
WIRE CRIMPER
HANDS FREE BUTANE MICRO TORCH
• The ultimate in multi-purpose wire crimping tools.
• Wire crimper features:
»Wire cutter.
»Bolt cutters
»Funnel-shaped wire stripper.
»Ignition crimp station
»Cushioned vinyl handles.
»Insulated terminal crimping stations.
• Torch ships empty.
• Anti-flare, hands-free operation.
• Torch is refillable, automatic, adjustable,
self-igniting and has a 2500° F (1,300° C) flame.
PART NO.
QTY.
71502
1
PART NO.
QTY.
71339
1
BUTANE MICRO TORCH
• Compact size allows it to be carried anywhere and easily
fits into tool kits.
• Flame temperature up to 2,500° F, (1,300° C).
• Wind-proof flame and water-resistant ignition.
• Built-in safety lock with easy to use self-ignition system.
• Nonstop run time of approximately 20 minutes.
• Built-in fuel level viewing window.
• Comes with one refillable butane fuel cell.
AUTOMATIC WIRE STRIPPER
• Strips from 10-24 AWG.
• No nicking, cutting or fraying of wire.
• Wire is automatically gripped and stripped
with the same motion.
• Release pressure and the jaws automatically
opens to release stripped wire.
• Includes a wire cutter.
PART NO.
QTY.
6444
1
PART NO.
QTY.
71145
1
Note: Imperial Supplies will not sell or ship butane. Butane can be
purchased locally. Blazer Triple Refined Butane is recommended.
RATCHET HAND TOOL
• Insures equal and exact crimps on electrical terminals.
• Crimp action must be completed before ratchet will release,
assuming a proper crimp and maximum pull-test.
• Double crimp feature offers barrel and
wire insulation crimp in same operation.
• Heavy-duty return spring action with
operator safety release lever.
• Three-nested color coded crimp die.
• Ergonomically designed.
• Crimps 22-10 AWG insulated terminals.
PART NO.
QTY.
71498
1
ELECTRONIC HEAT GUN
• Variable temperature control from
250° F to 1,100° F.
• Two speed motor selector switch.
• Rating: 120 V;
1,200 watts at 10 amp
• Meets UL and CSA approvals.
• Lightweight at 1.8 lb.
VIDEO INSPECTION
PART NO.
DESCRIPTION
QTY.
71147
71148
Electronic heat gun
Replacement deflector
1
1
VIDEO INSPECTION SYSTEM
• Ruggedized video inspection system.
• Non-recording
• Color LCD screen
• Probes are oil, water, and dust proof to
IP67 standard.
• Adjustable LED in camera head
illuminates dark areas.
PART NO.
QTY.
74089
1
M48
CALL
• Display size: 2.4"
• Probe diameter: 9 mm
• Probe type: flexible-obedient
• Probe length: 1 m
• Probe field of view: 60°
• Probe depth of field: 1" to infinity
• Power source: 4 AA batteries (included)
1-800-558-2808 /
FAX
THERMOMETERS
INFRARED THERMOMETER
• Temp. Range: -40 to 1022°F
• Focus spot size and Distance: 1" @ 12"
• Accuracy: +/- 2°F or +/- 1%
• Response time: 500 msec
• Backlit LCD display
• Includes carrying case.
PART NO.
QTY.
72901
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
HAND TOOLS
SCREWDRIVER
M E A S U R I N G & L AY O U T T O O L S
METRIC PITCH GAUGE
6-IN-1 SCREWDRIVER SET
• For measuring the thread
size of metric fasteners.
• 24 gauge steel construction.
• Soft slip resistant handle grip provides
torque and comfort
• Heat treated, steel bits
• Double end bits for quick change
• Includes:
» (2) Slotted: 1/4" & 3/16"
» (2) Phillips: #1 & #2
» (2) Nut driver: 1/4" & 5/16"
PART NO.
QTY.
82560
1
• For measuring the thread
size of standard fasteners.
• 24 gauge steel construction.
• Precision slotted screwdriver
• Tip Size: 2.0 mm
• Use to adjust refractometers, Part No. 5955, 5976, 5982, 5983
PART NO.
QTY.
1
QTY.
1
FRACTIONAL
PITCH GAUGE
PRECISION SLOTTED SCREWDRIVER
87037
PART NO.
11111
PART NO.
QTY.
11112
1
MEASURING TAPE
• Graduation Type: In/Ft Fractional, Inches To 16ths
• ABS plastic case with molded rubber grip.
• Retractable Measuring Tape.
• Length: 30'
• Width: 1"
• Tape Style: Blade
NUT DRIVER
PART NO.
QTY.
9006
1
HOSE CLAMP DRIVER WITH FLEX SHAFT
• Flexible shaft allows for 90° access.
• Reversible socket fits both 1/4" and 5/16" hex heads.
• Socket fits mini and standard hose clamp screw heads.
• No-slip grip.
PART NO.
QTY.
72360
1
PUNCHES
FIVE-PIECE CENTER PUNCH SET
• Hot forged from alloy steel for maximum
strength; hardened and tempered for
maximum durability.
• Five piece set includes one each of hex size:
1/4, 5/16, 3/8, 1/2 and 5/8
HEX DRIVES
PART NO.
QTY.
87127
1
MAGNETIC HEX DRIVES
PART NO.
SIZE
SCREW
SIZE
OVERALL
LENGTH
QTY.
66460
66461
66462
66467
66468
66469
1/4
5/16
3/8
1/4
5/16
3/8
#6-#8
#10-#12
1/4
#6-#8
#10-#12
1/4
1-11/16
1-11/16
1-7/8
2-1/2
2-1/2
2-1/2
1
1
1
1
1
1
#69225
HEX DRIVES
• Part No. 69250 is magnetic.
PART NO.
SIZE
SCREW
SIZE
OVERALL
LENGTH
QTY.
69225
69250
1/4
1/4
1/4
1/4
3"
2-5/16
1
1
#69250
Can't find the products you are
looking for? Call Imperial and
we will find it for you.
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M49
SHOP SUPPLIES
HAND TOOLS
DRIVE BITS
IMPACT RATED TERMINATOR BITS
• Up to 30x performance in impact applications over standard bits.
• Two component impact absorbing materials combine for enhanced tool life.
• Optimized Dual material Torsion Zone allows for 60° of twist.
• No special bit holders required, existing 1/4" drive tooling is all that is needed.
• Precision machine exact tips.
• Great for any impact tool and fastener application.
TORX® INSERT BITS
HEX DRIVE INSERT BITS
SQUARE DRIVE INSERT BITS
PART
NO.
CROSS
REF.
HEX
SIZE
BIT
LENGTH
QTY.
69540
69540-2
69541
69541-2
69542
69542-2
69543
69543-2
69544
69544-2
69545
69545-2
69546
69546-2
T-10
T-10
T-15
T-15
T-20
T-20
T-25
T-25
T-27
T-27
T-30
T-30
T-40
T-40
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
29 mm
10
2
10
2
10
2
10
2
10
2
10
2
10
2
PART
NO.
CROSS
REF.
HEX
SIZE
TIP
SIZE
QTY.
69554
69554-2
69555
69555-2
69556
69556-2
#1
#1
#2
#2
#3
#3
1/4
1/4
1/4
1/4
1/4
1/4
1
1
2
2
3
3
10
2
10
2
10
2
PART
N O.
CROSS
REF.
69560
69560-2
69561
69561-2
69562
69562-2
69563
69563-2
69564
69564-2
69565
69565-2
HEX
SIZE
TIP
SIZE
QTY.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/8
9/64
9/64
5/32
5/32
3/16
3/16
7/32
7/32
1/4
1/4
10
2
10
2
10
2
10
2
10
2
10
2
PART
NO.
69573
69573-2
69574
69574-2
69575
69575-2
69576
69576-2
CROSS
REF.
HEX
SIZE
TIP
SIZE
QTY.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3 mm
3 mm
4 mm
4 mm
5 mm
5 mm
6mm
6mm
10
2
10
2
10
2
10
2
Torx® is a registered trademark of Camcar.
TERMINATOR IMPACT INSERT BIT BUDDY SET
WITH MAGNETIC HOLDER
#69581
#69582
• Up to 30x performance in impact applications over standard bits.
• Two component impact absorbing materials combine for enhanced tool life.
• Optimized Dual material Torsion Zone allows for 60° of twist.
• No special bit holders required, existing 1/4" drive tooling is all that is needed.
• Precision machine exact tips.
• Includes standard magnetic bit holder in Bit Buddy Holder.
SETS WITH BIT BUDDY HOLDER:
PART
NO.
CROSS
REF.
69581
76891
69582
76893
69583
76895
SET INCLUDES:
SETS WITHOUT BIT BUDDY HOLDER:
PART
NO.
QTY.
Phillips Drive #2, #3
Square Drive #2, #3
Torx® Drive T-20, T-25, T-30
Metric Hex Drive 4 mm, 5 mm, 6mm
Fractional Hex Drive 5/32, 3/16, 7/32, 1/4
Torx® Drive T-10, T-15, T-20, T-25, T-30, T-40
#69583
CROSS
REF.
1
69584
76892
1
69585
76894
1
69586
46896
SET INCLUDES:
QTY.
Phillips Drive #2, #3
Square Drive #2, #3
Torx® Drive T-20, T-25, T-30
Metric Hex Drive 4 mm, 5 mm, 6mm
Fractional Hex Drive 5/32, 3/16, 7/32, 1/4
Torx® Drive T-10, T-15, T-20, T-25, T-30, T-40
1
1
1
STAINLESS STEEL TORX® TERMINATOR INSERT BIT
MAGICSPRING TORX® POWER BIT
• Up to 30x performance in impact applications over standard bits.
• Two component impact absorbing materials combine for enhanced tool life.
• Optimized Dual material Torsion Zone allows for 60° of twist.
• No special bit holders required, existing 1/4" drive tooling is all that is needed.
• Precision machine exact tips. • Great for any impact tool and fastener application.
• 2 bit pack.
PART
NO.
CROSS
REF.
HEX
SIZE
TIP
SIZE
QTY.
69588
69589
69590
69591
69592
71503
71504
71511
71512
71513
1/4
1/4
1/4
1/4
1/4
T-15
T-20
T-25
T-30
T-40
1
1
1
1
1
PART
NO.
CROSS
REF.
HEX
SIZE
BIT
LENGTH
QTY.
69593
69594
69595
69596
69597
T-15
T-20
T-25
T-30
T-40
1/4
1/4
1/4
1/4
1/4
50 mm
50 mm
50 mm
50 mm
50 mm
1
1
1
1
1
Torx® is a registered trademark of Camcar.
Torx® is a registered trademark of Camcar.
M50
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
HAND TOOLS
DRIVE BITS
PREMIUM TORX® DRIVE BITS
• Tough, fracture-resistant tips for long life.
• Great for installing any screws with
the Torx Plus Drive Style.
• Lasts six times
longer than
medium-hard bits.
HEX DRIVE BIT
PHILLIPS DRIVE BITS
PART
NO.
SHANK
SIZE
HEX
SIZE
OVERALL
LENGTH
QTY.
66530
1/4
5/64
1-5/16
5
PREMIUM LONG LENGTH DRIVE BITS
PART
NO.
CROSS
REF.
HEX
SIZE
BIT
LENGTH
QTY.
67138
67139
67141
67140
67142
T-25
T-30
T-30
T-40
T-40
5/16
1/4
5/16
1/4
5/16
1"
1"
1"
1"
1"
5
5
5
5
5
Torx® is a registered trademark of Camcar.
6-LOBE DRIVE BITS
• Tough, fracture-resistant tips for long life.
• Lasts six times longer than
medium-hard bits.
PART
NO.
CROSS
REF.
HEX
SIZE
BIT
LENGTH
QTY.
69254
69206
69255
69234
69233
69238
66495
66504
69242
66496
69236
69235
66502
66497
66503
69240
66498
69243
69243-4
69230
69241
66499
69244
69244-4
69248
69237
69245
T-6
T-7
T-8
T-10
T-15
T-20
T-20+
T-20
T-25
T-25+
T-25W
T-27
T-25
T-27+
T27
T-30
T-30+
T-30
T-30
T-40
T-40
T-40+
T-40
T-40
T-45
T-50
T-55
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
1/4
1/4
1/4
1/4
5/16
1/4
5/16
1/4
1/4
5/16
5/16
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
1"
1"
1"
1"
1"
1"
1"
1/4
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-5/16
1"
1"
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
50
5
5
5
5
50
5
5
5
PART
NO.
CROSS
REF.
HEX
SIZE
BIT
LENGTH
QTY.
69206
66488
66480
66481
66482
66484
66483
66485
T-7
T-8
T-15
T-20
T-25
T-25
T-27
T-27
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1"
3-1/2
2-3/4
2-3/4
2-3/4
6"
2-3/4
6"
5
2
2
2
2
2
2
2
TIP SIZE
OVERALL
LENGTH
SCREW
SIZES
69301
69232
69239
69309
1/8 (#2)
3/32 (#1)
1/8 (#2)
1/4 (#3)
1"
2"
2"
2"
8-9-10
5-6-7
8-9-10
HEX
SIZE
OVERALL
LENGTH
PHILLIPS
POINT
QTY.
69252
69246
66490
66491
66470
66487
66510
66513
66511
69261
69247
69303
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
1/4
1"
1"
2-3/4
2-3/4
1"
2"
1"
1-1/4
1-1/4
1-1/4
1-1/4
2"
#2
#3
#2
#3
#1
#2
#1
#2
#4
#2
#3
#8, 9, 10
5
5
2
2
5
5
5
5
5
5
5
10
SLOTTED DRIVE BITS
1/4" HEX SQUARE
DRIVE BIT
PART
NO.
PART
NO.
QTY.
5
5
5
10
PART
NO.
HEX
SIZE
OVERALL
LENGTH
FITS
SCREW
QTY.
69220
69221
66512
69222
69223
1/4
1/4
5/16
1/4
5/16
1"
1"
1-1/2
1"
1-1/2
6F-8R
8F-10R
8F-10R
10F-12R
12F-14R
5
5
5
5
5
HEX SOCKET BIT
METRIC SOCKET BIT
PART
NO.
SIZE
HEX
SIZE
OVERALL
LENGTH
QTY.
69227
69249
69219
69209
4 mm
5 mm
6 mm
8 mm
1/4
1/4
1/4
1/4
1-5/16
1-5/16
1-5/16
1-5/16
5
5
5
5
PART
NO.
HEX
SIZE
OVERALL
LENGTH
SHANK
SIZE
QTY.
69316
69258
69317
66501
66516
66500
1/4
1/4
1/4
7/32
1/4
5/16
1"
1"
1"
1-5/16
1-5/16
1-5/16
5/16
3/16
5/16
5/16
5/16
5/16
5
10
5
5
5
5
DRIVE BIT HOLDERS
BIT HOLDERS FOR HEX INSERTS
• For use with 3/8" and 1/2" impact guns.
• For use with 3/8" and 1/2" ratchet tools.
PART NO.
FITS HEX BIT
SIZE
FEMALE SQUARE
DRIVE SOCKET
SOCKET
LENGTH
QTY.
66465
66466
66463
66464
1/4
5/16
1/4
5/16
3/8
3/8
1/2
1/2
1-1/2
1-1/2
1-3/4
1-3/4
2
2
2
2
CENTROFIX QUICK RELEASE 1/4" BIT HOLDER
• Centrofix quick release.
• For drills, Countersinks and Power bits.
PART NO.
SIZE
QTY.
69587
1/4
1
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M51
SHOP SUPPLIES
HAND TOOLS
WRENCHES > HEX & TORX KEY SETS
BALL DRIVER L-WRENCH SETS
• Set includes handy organizing case.
• Fractional set or fractional and metric set available.
PART NO.
SET
SIZES
QTY.
87241
13 Piece Inch Set
.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,
5/32, 3/16, 7/32, 1/4, 5/16, 3/8
1
87243
13 Piece Inch Set
9 Piece Metric Set
.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,
5/32, 3/16, 7/32, 1/4, 5/16, 3/8,
MM 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0
1
87244
13-Piece Metric Set
Long Arm 6-Lobe Ends: T5, T6, T7, T8, T9, T10,
T15, T20, T25, T27, T30, T40, T50
87247
13 Piece Inch Set
MagicRing Ball Ends: 1/8, 9/64, 5/32,
3/16, 7/32, 1/4, 5/16, 3/8
1
Standard Ball Ends: .05, 1/16, 5/64, 3/32, 7/64
87248
9 Piece Metric Set
MagicRing Ball Ends: MM 3, 4, 5, 6, 8, 10
Standard Ball Ends: MM 1.5, 2.0, 2.5
#87241
#87243
#87244
1
1
#87247
HEXAGON KEYS
#87248
9-PIECE METRIC HEXAGON KEY WRENCH SET
• Long arm.
• Alloy steel.
PART NO.
KEY SIZE
QTY.
PART NO.
KEY SIZE
QTY.
18976
18977
18978
18979
18980
18981
18982
18983
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
5
5
5
5
5
5
5
5
18984
18985
18986
18987
18989
18990
18991
18992
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1"
5
5
5
5
1
1
1
1
• Nine-piece metric hex key wrench set.
• MM sizes 1.50 to 10 mm.
• Use for DIN 912, DIN 7991 and DIN 916.
PART NO.
SIZES
QTY.
13700
1.50, 2, 2.50,
3, 4, 5, 6, 8,
10 mm
1
WRENCHES > MICROMETER TORQUE WRENCH
TORQUE WRENCH
• Micrometer Torque Wrench.
• Drive Size: 1/2"
• Head type ratcheting.
• Primary Scale Range: 25 - 250 ft-lb
• Primary Scale Increments: 1.0 ft-lb
PART NO.
QTY.
87035
1
• Secondary Scale Range: 33.9 - 339 Nm
• Secondary Scale Increments: 1.25 Nm
• Overall Length: 25"
• CW Rotation, Accuracy: +/-4% CW.
• Includes blow molded box.
TORQUE WRENCH
• LED Torque Wrench.
• Drive Size: 1/2"
• Head type ratcheting.
• Torque Range: 25 - 250 ft-lb
• Increments: 1.0 ft-lb
PART NO.
QTY.
87036
1
M52
CALL
• Secondary Scale Range: 33.8 - 338 Nm
• Secondary Scale Increments: 1 Nm
• Overall Length: 27"
• CW Rotation, Accuracy: +/-2% CW/CCW.
• Includes blow molded box.
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
I N T E R I O R P R O T E C TA N T S & C L E A N E R S
SPRAYWAY® FOAMING RUG &
UPHOLSTERY CLEANER
UPHOLSTERY CLEANER & PROTECTANT
• Use for any setting where rugs and upholstery
requires deep cleaning.
• Releases ground-in dirt from rugs, carpets and
upholstery including velour.
• Perfect for spot-cleaning, spills and spot pickup.
• Not for use on silk upholstery.
• Clean fresh scent.
PART NO.
NET WEIGHT
QTY.
85548
18 oz
12
• Powerful cleaning action and gentle on your hands.
• Works on leather, cloth, vinyl and carpets in your auto, office or home.
• Contains no harsh solvents or chemicals, leaving a clean, fresh smell.
• Will not leave a chemical ring around the cleaned area.
• Removes odors, grease, smoke film and other tough stains with ease.
• Eliminates pet stains/odors and food odors.
• Can be used with an extractor/steam cleaner.
PART NO.
NET WEIGHT
QTY.
6647
6647-4
16 oz
1 gal
12
4
SPRAYWAY® 558 FABRIC CLEANER
• Formulation quickly and effectively removes soils from
most upholstered fabrics.
• Cleans effectively without leaving the fabric wet. The
inverted valve allows for cleaning hard to reach areas.
• Leaves the surface clean and dry with a fresh spearmint
fragrance.
• Use on most upholstered fabrics including velour, cloth
and carpeting.
PART NO.
NET WEIGHT
QTY.
6742
19 oz
12
SIMONIZ® SPOT REMOVER
• Cleans, penetrates and deodorizes without leaving a residue.
• Effective for removing dirt, ink, grease, oil, mud, ketchup,
urine, vomit, etc.
PART NO.
NET WEIGHT
QTY.
9332
18 oz
12
SIMONIZ® CARPET &
UPHOLSTERY CLEANER
SPOT SHOT® INSTANT
CARPET STAIN REMOVER
• Removes tough carpet stains without scrubbing.
• Dirt, grease and stain lifting technology.
• Patented odor eliminators.
PART NO.
NET WEIGHT
QTY.
85664
14 oz
12
NET WEIGHT
QTY.
32 oz
12
NET WEIGHT
QTY.
18 oz
12
• Use in auto-detailing shops and commercial or industrial situations.
• Removes gummy substances, candle wax,
and putty with minimum effort.
• The "freeze action" feature hardens the gummy substance to easily
remove from carpeting, fabrics or hard surfaces.
• Leaves no residue.
• Dirt, grease and stain lifting technology.
• Patented odor eliminators.
• Anti-resoiling agent.
• Entire bottle is certified biodegradeable.
PART NO.
PART NO.
9334
CHEWING GUM REMOVER
WITH "FREEZE ACTION"
SPOT SHOT® PROFESSIONAL
CARPET STAIN REMOVER
85665
• Cleans and restores carpets and upholstery to
"like new" condition in one easy step.
• Use on seats, carpets, mats and door panels.
• Special formulation leaves fabrics dry.
PART NO.
NET WEIGHT
QTY.
85528
7 oz
12
DUPLI-COLOR® VINYL AND FABRIC COATING
• Dress up or add new life to your interior vinyl and fabric.
• Use on vinyl seats, dashes, door panels,
shifter boots and consoles.
• Formulated with a maximum adhesion promoter
so there is no need for a primer.
• Fast drying, will not crack, peel or chip.
PART NO.
COLOR
NET WEIGHT
QTY.
85172
85173
85174
Flat Black
Medium Gray
Charcoal Gray
11 oz
11 oz
11 oz
6
6
6
Order before 1:00 CST for
same-day shipping.
CONNECT WITH IMPERIAL SUPPLIES
M53
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
I N T E R I O R P R O T E C TA N T S & C L E A N E R S
TURTLE WAX® ICE® INTERIOR CARE
IMPERIAL® VINYL PROTECTOR
• Cleans, shines, and protects all of today's interior soft vinyl, plastic,
leather and composite hard surfaces.
• Perfect for cleaning large areas, and
provides easy one step cleaning without
the greasy feel or
left over residue.
• CA/OTC approved, low VOC formula.
• Contains UV inhibitors to extend the life of vinyl and rubber.
• Contains anti-static agents to help repel dust and dirt.
• Will not crack vinyl or turn yellow with repeat use.
PART NO.
DESCRIPTION
SIZE
QTY.
5770
ICE Total Interior Care
23 oz
6
GLASS WIPES
PART NO.
DESCRIPTION
SIZE
QTY.
27 wipes
7" x 9"
1
• Protects and shines plastic, rubber and vinyl surfaces.
• UV protection, protects surface from discoloration and fading.
• Soft pack has a snap lock lid to keep the wipes moist longer.
DESCRIPTION
SIZE
QTY.
4039
27 wipes
7" x 9"
1
DESCRIPTION
SIZE
QTY.
27 wipes
7" x 9"
1
NET WEIGHT
QTY.
1 gallon
4
NET WEIGHT
QTY.
12
4
PART NO.
NET WEIGHT
QTY.
9335
32 oz
12
• Designed and formulated to put a high gloss
finishing touch on detail jobs.
• Use on dash boards, door jambs, vinyl, mud flaps,
tires, A/C Vents, body molding, etc
• One step product that cleans, protects and
restores delicate leather to a soft, supple
"like new" look and feel.
• Product has a pleasant leather scent.
PART NO.
NET WEIGHT
32 oz
1 gal
SIMONIZ® INSTANT SPRAY
SIMONIZ® LEATHER
CLEANER & CONDITIONER
9311
PART NO.
85512
85510-4
• Semi permanent coating used to restore faded rough bumpers,
racks, trim, moldings, tonneau covers & mirror covers
• Wash resistant and will provide months of protection over any
other type of dressing
• Water-based surface dressing with excellent gloss
and durability.
• Used on tires, trim, dash, leather, etc
• Best applied by hand.
PART NO.
QTY.
12
4
SIMONIZ® TRIMTASTIC
SIMONIZ® VINYL & LEATHER
WATER-BASED DRESSING
9303-4
NET WEIGHT
32 oz
1 gal
• Ready-to-use silicone based formula.
• Protects vinyl, leather and rubber against cracking
and drying out. • Makes surfaces anti-static.
• Non-flammable and non-corrosive.
CLEANING WIPES
PART NO.
PART NO.
7169
7170
PROTECTOR – VINYL, LEATHER
& RUBBER DRESSING
• Cleans upholstery, plastic, vinyl and dashboards.
• Safe to use on most automotive surfaces.
• Cleans dust, dirt and grime.
• Snap lock lid to keep the wipes moist longer.
4038
QTY.
2
12
4
• Protects surfaces from ozone, UV ray and oxidation damage.
• Spray on this ready-to-use dressing to beautify
and protect everything from vinyl and rubber to
wood, acrylic and plastic surfaces.
• Leaves a long-lasting, glossy finish.
PROTECTANT WIPES
PART NO.
NET WEIGHT
1 gal
16 oz trigger bottle
16 oz empty trigger bottle
ZEP® PROFESSIONAL
VINYL AND RUBBER PROTECTOR
• Removes road grime and film on glass.
• Streak-free formula.
• Ammonia free formula.
• Store in glove compartment, door pocket and center console.
• Snap lock lid to keep wipes fresh longer.
4045
PART NO.
4629
4729
2629
PART NO.
NET WEIGHT
QTY.
9333
11 oz
12
QTY.
6
SIMONIZ® NEW CAR SCENT FRESHENER
• Long lasting perfume based ready-to-use air
freshener with a clean new car scent
• Trigger sprayer bottle of air freshener
• Each case contains 2 sprayer heads
VINYL AND LEATHER REPAIR
• A clear, strong, flexible adhesive designed to mend rips,
tears and small holes on most types of vinyl surfaces.
• Resists yellowing, matches all colors.
PART NO.
NET WEIGHT
QTY.
PART NO.
NET WEIGHT
QTY.
9547
1 oz tube
1
9325
32 oz
12
M54
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
WA X E S & P O L I S H E S
TURTLE WAX® 1-STEP WAX & DRY
SPRAYWAY® INSTANT SHINE
SILICONE BASED
• The quickest and easiest way to a high gloss Turtle
Wax® shine, just spray and dry.
• Provides all the shine and protection of a traditional
wax in a fraction of the time.
• Formulated with a blend of carnauba wax and
protective polymers for a maximum shine and
protection.
PART NO.
NET WEIGHT
QTY.
5648
26 oz
6
• A final detail product designed and specially
formulated for the auto detailing professional.
• Just spray on and buff off or let dry for a like new shine.
• Use to spruce up vinyl interiors, bumpers, bumper
guards, body moldings, door jambs, engine compartments
and hard to reach air conditioner ducts.
PART NO.
NET WEIGHT
QTY.
6646
11 oz
12
TURTLE WAX® SUPER
HARD SHELL PASTE
SPRAYWAY® INSTANT DETAIL WAX
• Legendary super hard shell protection leaves a
lasting Turtle Wax® shine.
• Easy on and easy off formula lasts up to 12 months.
PART NO.
NET WEIGHT
QTY.
5649
14 oz
6
• Quick method for adding a showroom quality shine.
• Wax entire vehicle in minutes with protection, water
beading and shine that lasts for weeks.
• No buffing needed. Will not leave residue on your finish.
• Apply a light mist to the clean surface of your vehicle.
• Wipe with a dry, clean towel or micro fiber.
TURTLE WAX ICE EXTERIOR POLISHES
®
®
PART NO.
NET WEIGHT
QTY.
6645
16 oz
12
• Put a new hard-shell finish that lasts.
• ICE products give you the shine you'd expect.
• Advanced formulas make it easy to keep cars cleaner, longer.
SPRAYWAY® INSTANT
DETAIL CLEANER AND POLISH
PART NO.
DESCRIPTION
SIZE
QTY.
5763
5773
5765
5767
ICE Synthetic Paste Polish
ICE Synthetic Polish
ICE Synthetic Detailer
ICE Synthetic Spray Wax
8 oz
16 oz
23 oz
23 oz
6
6
6
6
• A quick detail touch up spray for use between
waxes to maintain a showroom quality shine.
• Gentle enough to use everyday and safe for all paint types.
• Lightly mist and wipe to remove harmful contaminants,
fingerprints, water spots and surface dirt will maintaining
a glossy shine.
• Color: Off White
• Fragrance: Fruity
PART NO.
NET WEIGHT
QTY.
6644
16 oz
12
MAGIC MIST - SHOWROOM SHINE
• Removes dust, fingerprints, smudges, bugs and other
contaminates from painted and/or glass surfaces.
• Produces a flawless showroom shine without strenuous
buffing and waxing.
• Will not scratch or streak.
• Use on painted surfaces, glass, chrome, mirrors and more.
• Works on glass TV screens and glass computer screens
while producing a barrier from static electricity and dust.
• Will continually bead water and repel dust.
PART NO.
NET WEIGHT
QTY.
6648
16 oz
12
SPRAYWAY® AUTO CARE INSTANT SHINE
• Instant shine, non-silicone spray.
• Creates a high finish on rubber, plastic, vinyl and
most other surfaces.
• Designed for ease of use in all applications it shines and
protects against weathering without the use of silicone.
• Body shop friendly.
• High gloss shine.
• No paint contamination.
PART NO.
NET WEIGHT
QTY.
6635
11 oz
12
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M55
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
WA X E S & P O L I S H E S
3M™ LENS
POLISH & PROTECTOR
BLUE MAGIC METAL POLISH CREAM
• For all metal surfaces
• Non-Abrasive
• Great on brass, copper, sterling silver, aluminum, stainless
steel and gold
• Removes tarnish and oxidation
• Provide long lasting protective coating
• Safely removes hairline scratches or other minor
imperfections from automotive plastics.
PART
NO.
CROSS
REF.
SIZE
QTY.
5781
39010
8 oz
1
PART NO.
DESCRIPTION
SIZE
QTY.
4055
Metal Polish
3.5 oz tube
1
3M™ MACHINE POLISH
• Uniquely formulated to remove compound swirl marks.
• Contains no waxes or silicones.
• Best for dark colored paint finishes.
• Less clean up required.
• Color: gray
PART
NO.
CROSS
REF.
DESCRIPTION
SIZE
QTY.
5775
05996
Machine Polish
1 qt
4
SIMONIZ® SURE SHINE WAX/POLISH
• Polymer based polish provides ease of a liquid and the
durability of a paste.
• Used as an express wax and offers high gloss and
exceptional slickness within minutes of application.
• Apply by hand, random orbital polisher, or variable speed buffer.
• Will NOT leave residue on unpainted moldings.
• Variable speed buffing should be done with polishing
foam pad at 1,000 - 1,200 RPMs
3M™ PERFECT-IT™ POLISHES
PART NO.
DESCRIPTION
SIZE
QTY.
9304
Wax/Polish
32 oz
6
• High performance vehicle polish.
PART
NO.
CROSS
REF.
DESCRIPTION
SIZE
QTY.
5777
5778
5779
06064
06068
06069
Machine Polish
Ultrafine Machine Polish
Ultrafine Machine Polish
1 qt
1 qt
1 gal
6
6
4
SIMONIZ® QUICK CLEANER POLISH
• Product is a polish and cleaner wax in one
• Removes light scratches and swirls. Leaves the paint protected
with a long lasting gloss
• Apply by hand, random orbital polisher, or variable speed buffer
SIMONIZ® BODY GLOSS
• One-step super high gloss polish for use on all
automotive finishes.
• Can be sprayed on a wet or dry surface and hand
buffed to a high gloss and smooth finish.
• Works great on paint, glass, chrome and leaves no
messy or "white" residue on unpainted trim or decals.
• Use as clay bar lubricant.
PART
NO.
DESCRIPTION
SIZE
QTY.
9307-4
Wax/Polish
1 gallon
4
PART NO.
DESCRIPTION
SIZE
QTY.
9305
Cleaner/Polish
32 oz
6
SIMONIZ® NU SHINE
• Easy-to-use cleaner/polish that is excellent on dark
automotive finishes.
• Can be used as an express wax or in full restoration projects
• Offers a high gloss and exceptional durability.
• Apply by hand, random orbital polisher or variable speed buffer
• Variable speed buffer should be done with a polishing foam pad
at 1,000 to 1,200 RPMs
PART NO.
DESCRIPTION
SIZE
QTY.
9306
Wax/Polish
32 oz
6
SIMONIZ® CORRECTION CREME
• Easy-to-use light cut compound and polish in one that removes
light oxidation and swirl marks
• Removes minor acid rain contamination, light scratches and
increases gloss on base coat, gel coat and clear coat paint finishes.
• Can be used as a one step, a quick hazing cleaner wax, or as a
light compound in a buffing process.
• Apply by hand, an orbital sander or a variable speed buffer.
Variable speed buffing should be done at 1,100 to 1,400 RPMs
SIMONIZ® DETAILERS CHOICE
• One step polish is an easy-to-use spray polish and
clay lubricant.
• Contains no toxic chemicals and is safe for use on all
automotive finishes
• Leaves a smooth bright non-static finish
• Great for final touch-ups on glass, chrome, fiberglass, interior
and exterior plastic effects.
PART
NO.
DESCRIPTION
SIZE
QTY.
PART NO.
DESCRIPTION
SIZE
QTY.
9310
Correction Creme
32 oz
6
9329
Detailers Choice
1 gallon
4
M56
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
WA X E S & P O L I S H E S
SIMONIZ® EXPRESS WAX
SIMONIZ® SYNTHETIC SEALER
• Easy product coverage and removal in a
brief amount of time for illustrious results
• Excellent on clear coats, chrome and
perfect for glass polishing
• Use by hand or random orbital buffer
• Great for a fast wax and protection for
spot deliveries in new car prep
• High quality paint sealant doubles as a cleaner wax
• Extreme wash resistance
• Increase depth of gloss.
• Apply by hand, with a random orbital polisher or a
variable speed buffer
• Variable speed buffing should be done with a
finishing pad at 1,000 to 1,2000 rpm
PART NO.
DESCRIPTION
SIZE
QTY.
PART NO.
DESCRIPTION
SIZE
QTY.
9337-4
Wax/Polish
1 gallon
4
9340
Wax/Polish
32 oz
6
SIMONIZ® QUICK CLEANER POLISH
• Polish and cleaner wax in one
• Removes light scratches and swirls and leaves the
paint protected with a long lasting gloss
• Apply by hand, random orbital polisher or a
variable speed buffer
PART NO.
DESCRIPTION
SIZE
QTY.
9339-4
Wax/Polish
1 gallon
4
SEE PAGE M60-M61
Polishing Supplies
S C R AT C H R E M O V E R S
S U R FA C E P R E PA R AT I O N
TURTLE WAX® PREMIUM GRADE
SCRATCH REPAIR KIT
3M™ DRY GUIDE COAT CARTRIDGE
• Use to highlight surface imperfections and
sand scratches prior to finishing with abrasives.
• Dry powder with applicator.
• Can use on marine fillers, primers,
paints and gel coat.
• Contains no solvents.
• Remove lighter scratches from small to larger areas.
• Can minimize the need for more expensive repairs.
• Kit includes:
» (3) 2" x 2" Color Coded Restoration Pads
» (1) 4 fl oz Spray Lubricant
» (1) 4 fl oz Paint Clarifying Compound
» (1) 0.3 fl oz Clear Coat Finish Pen
PART NO.
QTY.
5756
6
PART NO.
CROSS
REF.
NET
WEIGHT
QTY.
8047
05860
50 grams
1
COMPOUNDS
TURTLE WAX® POLISHING COMPOUND
• Pre-softened paste that instantly shines new life and color into dull faded finishes.
• Quickly and safely removes oxidized pigment, heavy road film, dirt and stains.
• Goes on smoothly, contains no harsh abrasives.
• Cleans all painted metal,
chrome and porcelain surfaces.
PART NO.
NET WEIGHT
QTY.
5657
10.5 oz
6
3M™ PERFECT-IT™ II RUBBING COMPOUND
• Medium cutting.
• Liquid compound for removing 1200, 1500,
and 2000 color sanding scratches in
automotive paints including clear coats.
• Color: light brown
PART NO.
CROSS
REF.
DESCRIPTION
SIZE
QTY.
5774
5776
05974
06085
Rubbing Compound
Rubbing Compound
1 gal
1 qt
6
6
TURTLE WAX® RUBBING
COMPOUND PASTE
• A heavy duty paste that cleans
dull, oxidized finishes.
• Helps remove scratches and blemishes.
PART NO.
NET WEIGHT
QTY.
5650
10.5 oz
6
3M® SUPER DUTY
RUBBING COMPOUND
• Aggressive compound.
• Remains wet on the job with little or no mess.
• Maintains high rate of cut with constant pressure.
• Buffs to high gloss with minimal swirl marks.
• Can be used by hand or machine.
PART NO.
NET WEIGHT
QTY.
5592
1 gal
4
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M57
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
COMPOUNDS
SIMONIZ® BIG RED
SIMONIZ® SS1 COMPOUND
• Heavy duty gel style compound for use on badly
oxidized paint finishes.
• Applied by hand or with a variable speed buffer at
1,200 - 1,400 RPMs
• Great for use on gel coat finishes such as RV and
marine vehicles.
• Recommended fro professional detailers only.
• Abrasiveness is high.
• Silicone free light compound designed to remove 2000
grit scratches and leaves the finish free of swirl marks.
• Follow up with Free Finish Glaze
PART NO.
NET WEIGHT
QTY.
9308
32 oz
6
PART NO.
NET WEIGHT
QTY.
9312
32 oz
6
SIMONIZ® SS2 COMPOUND
• Silicone free compound designed to remove moderate
oxidation and scratches.
• Use with either a foam or wool cutting pad at 1,200 to
1,400 RPMs to remove 1500 grit scratches.
• Follow up with SS1
SIMONIZ® ALL PURPOSE
POLISH COMPOUND
• Moderately aggressive compound that brings back
brilliant luster, without dust, while buffing
• Recommended for removing oxidation and scratches
from base coat and clear coat paint finishes
• Can be applied by hand or with an orbital polisher. For
superior results, use a variable speed buffer at 1,200
to 1,400 RPMs
PART NO.
NET WEIGHT
QTY.
9309
32 oz
6
PART NO.
NET WEIGHT
QTY.
9313
32 oz
6
SIMONIZ® SS3 COMPOUND
• Silicone free, heavy duty compound designed to
remove oxidation and 1000 grit scratches.
• For best results use wool pad on a variable speed
buffer at 1,200 to 1,400 RPMs
• Follow up with SS2.
• High Abrasiveness.
SIMONIZ SPRAY GLOSS
®
• Body shop safe, detail spray polish that provides
shine with no silicones.
• Can be used on the entire exterior of the vehicle, and
also as a clay bar lubricant
• Can be diluted with water
• Can be used as an all purpose drying agent that
works well in friction and frictionless wash systems.
PART NO.
NET WEIGHT
QTY.
9316-4
1 gallon
4
NET WEIGHT
QTY.
32 oz
6
QTY.
6
• Body shop safe, silicone free dressing
• Can be applied to exterior, interior,
vinyl, rubber and trim.
• Silicone free compound that removes medium to heavy
scratched and pain blemishes.
• Use with a variable speed polisher at 1,200 to 1,400
RPMs and (cutting/polishing wool blend pad).
• Follow up with Free Finish Glaze.
PART NO.
NET WEIGHT
32 oz
SIMONIZ® SS DRESSING
SIMONIZ® FREE FINISH COMPOUND
9317
PART NO.
9314
PART NO.
NET WEIGHT
QTY.
9315-4
1 gallon
4
POLISHING SUPPLIES
SIMONIZ® FINE GRADE CLAY BAR
SIMONIZ® MEDIUM GRADE CLAY BAR
• Deep cleans and removes surface contaminants
like \tree sap mist, bug residue, road tar and
other stubborn dirt.
• Leaves surface super clean and smooth as glass.
• Deep cleans and removes surface contaminants
like \tree sap mist, bug residue, road tar and
other stubborn dirt.
• Leaves surface super clean and smooth as glass.
PART NO.
NET WEIGHT
QTY.
PART NO.
NET WEIGHT
QTY.
9326
200 gram
1
9327
200 gram
1
M58
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
D E TA I L I N G S U P P L I E S
E X T E R I O R R E S T O R AT I O N
GRIP-IT SUPERIOR CLEANING TOOLS
BRITEPLUS MX ALUMINUM CLEANER
• Made of millions of tiny split polyester and nylon strands.
• Micro-woven to achieve an ultra-absorbent material.
• Traps dirt particles and grease deep inside leaving little or no residue behind.
• Proven cleaner for tough jobs like over-the-road trailers,
engine compartments, SUV wheels and vans.
• Designed for cleaning stained or oxidized aluminum
and older stainless steel.
• Formulated from agricultural products.
• Professional cleaning results.
• Easy to apply and user safe. Cost effective.
PART NO.
DESCRIPTION
QTY.
5749
5751
5752
5753
5833
Chenille Mitt
Sponge With Bug Scrubber
Drying Cloth
Cleaning Cloths (8 - pack)
Glass Cleaning Cloths (2 - pack)
1
1
1
1
1
#5751
#5749
PART NO.
NET WEIGHT
QTY.
85535
2.5 gal
1
TURTLE WAX® TRIM RESTORER
#5753
#5752
#5833
BUFF AND SHINE POLY MESH
YELLOW NET BUG SPONGE
• Great for removing bugs, contaminants and bird droppings.
• The inner sponge will absorb plenty of soapy water to make the
usage of the sponge an ease.
• The tough mesh will hold up constant abuse
and allows you to clean windshields as well.
• Poly mesh, yellow net sponge
PART NO.
SIZE
QTY.
5796
7" x 4" x 1"
1
BUFF AND SHINE SYNTHETIC DRYING CLOTH
• Synthetic auto drying cloth
• Superior water retention
• Color: Light Beige
PART NO.
SIZE
QTY.
5793
27" x 27"
1
• Beautifies and leaves a deep shine on exterior trim.
• One application shines and protects longer
than ordinary trim sealer products.
• Primary Applications: plastic trim, body cladding,
window seals, molding, plastic wiper arms,
door handles, tonneau covers, and more.
• Can be used on any color plastic trim.
• Includes foam applicator for precise application control.
PART NO.
QTY.
5755
6
SILVER BRITEPLUS MX
ALUMINUM CLEANER
• Proven cleaner for polished aluminum and stainless
trailers, tankers, polished wheels and tanks.
• Formulated from effective agriculture products.
• Professional cleaning results.
• Easy to use. Cost effective.
PART NO.
NET WEIGHT
QTY.
85534
2.5 gal
1
IMPERIAL® RUBBER CARE - SILICONE FREE
3M™ PERFECT-IT™ DETAILING CLOTHS
• Incorporates 3M's unique, absorbent microfiber technology.
• Quickly and completely removes oily or film residues
including waxes, polishes, glazes, and fingerprints.
• Clear coat safe. Soft, non-scratching. • Lint-free.
PART NO.
CROSS
REF.
SIZE
QTY.
74807
06016
12" x 14"
6
3M™ ALL PURPOSE TACK CLOTH
• Excellent for cleanup just before painting.
• Use to remove dirt, lint, dust and sanding
particles from metal, plastic, fiberglass and wood.
• Reusable. Stays soft. Non-toxic.
• Reduces adhesive transfer to the hands.
• Good dust collection - dust is drawn into the tack cloth.
• Will not dry out even in an oven.
• Beautifies vinyl, rubber, plastic & painted surfaces and
hides wax marks on trim
• Fast drying formula
• Low VOCs
• Guards against ultraviolet rays
• Silicone Free, safe to use on paint and in car detailing shops
PART NO.
NET WEIGHT
QTY.
6746
12 oz
12
SIMONIZ® FREE FINISH GLAZE
• Silicone free product that removes swirl marks and produces
amazing brilliance when used alone or as a final step in the
body shop compounding process.
• Produces a deep gloss without waxes or fillers
• Low Abrasiveness
• Use with a variable speed polisher @ 1,200 to 1,400
RPMs and a cutting foam pad. Repeat process with a
polishing pad.
PART NO.
CROSS
REF.
DIAMETER
QTY.
PART NO.
NET WEIGHT
QTY.
74810
03192
17" x 36"
40
9318
32 oz
6
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M59
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
POLISHING SUPPLIES
3M™ PERFECT-IT™
POLISHING PADS
3M™ PERFECT-IT™ WOOL
COMPOUNDING PAD
• Performance vehicle polish.
• Single sided.
• Single sided.
PART NO.
CROSS
REF.
DESCRIPTION
COLOR
DIAMETER
QTY.
8085
8086
8090
8087
8088
05738
05733
05723
05759
05726
Foam Polishing Pad
Ultrafine Foam Polishing Pad
Foam Compounding Pad
Foam Buffing Pad
Foam Polishing Pad
Black
Blue
White
Purple
Black
8"
8"
8"
3"
3"
1
1
2
2
2
PART NO.
CROSS
REF.
COLOR
DIAMETER
QTY.
8115
74076
05719
05711
Wheat
Wheat
8"
9"
1
1
3M™ HOOKIT™
WOOL POLISHING PAD
• Single sided.
3M™ PERFECT-IT™
BUFFING AND
POLISHING PADS
PART NO.
CROSS
REF.
COLOR
DIAMETER
QTY.
8089
05713
Yellow
9"
1
• Double sided.
PART NO.
CROSS
REF.
DESCRIPTION
COLOR
DIAMETER
QTY.
8080
8081
8082
05706
05707
05708
Foam Compounding Pad
Foam Polishing Pad
Ultrafine Foam Polishing Pad
White
Black
Blue
8"
8"
8"
1
1
1
FOUR PACK MICRO-FIBER WAX AND
PROTECTANT APPLICATORS
• Micro-fiber is made up of millions of tiny split
polyester and nylon strands.
• Micro-woven to achieve an ultra-absorbent material.
• Micro-fiber traps dirt particles and grease deep
inside leaving little or no residue behind.
• Hand use only
• Grip-It™ Superior Cleaning Tools.
FOUR PAD BUFF KIT 3" DIAMETER
PART NO.
COLOR
DIAMETER
QTY.
• Features (4) 3" pads:
»Part No. 8252 for heavy compounding.
»Part No. 8253 for medium compounding.
»Part No. 8255 for polishing.
»Part No. 8254 for finishing.
• Backing plate:
»Part No. 8258.
• Two adapters:
• Allow for mounting on
both pneumatic polishers
and drill mounts.
5754
Blue/White
5"
1
BUFF & SHINE WAX/TIRE
DRESSING APPLICATOR
• Striped 100% Cotton Terry
• Size: 7" x 4" x 1"
• Designed to hold up against the
constant abuse these applicators face.
PART NO.
DIAMETER
QTY.
PART NO.
SIZE
QTY.
72793
3"
1
5795
7" x 4" x 1"
1
MICRO-FIBER POLISHING MITT
3M™ BACK UP PAD AND
QUICK RELEASE ADAPTER
• Pad and adapter allow for easy attachment,
quick removal and accurate centering of single
sided compounding or polishing pads.
PART NO.
CROSS
REF.
DESCRIPTION
DIAMETER
QTY.
8091
8092
05717
05752
3M™ Hookit™ Backup Pad
Quick Release Adaptor 5/8"
7"
—
1
1
M60
CALL
1-800-558-2808 /
FAX
• Micro-fiber is made up of millions of tiny split
polyester and nylon strands.
• Micro-woven to achieve an ultra-absorbent material.
• Micro-fiber traps dirt particles and grease deep
inside leaving little or no residue behind.
• Grip-It™ Superior Cleaning Tools.
PART NO.
COLOR
QTY.
5748
White
1
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
POLISHING SUPPLIES
BUFF&SHINE FOAM GRIP PADS
• For less aggressive buffing
• Use on fresh or cured paint when finishing a job
PART
NO.
CROSS
REF.
DESCRIPTION
FACE
COLOR
DIAMETER
USE WITH
PART NO.
QTY.
8117
8118
8120
8121
8122
8123
8124
8238
8239
8240
8241
8242
8243
8244
8249
8250
8251
8254
8255
620G
925GT
631WR
680WR
691WR
651WR
621WR
680RH
630RH
640RH
620RH
930G
940G
920G
613G
614G
612G
320G
330G
Finishing
Finishing
Compounding/Heavy Cutting
Light Compounding/Medium Cutting
Polishing
Soft Polishing
Finishing
Medium Cutting
Medium Cutting
Polishing
Finishing
Medium Cutting
Polishing
Finishing
Medium Cutting
Polishing
Finishing
Finishing
Medium Cutting
Flat Faced
Center Tee & Ventilation Holes
Convoluted/Waffle Face
Convoluted/Waffle Face
Convoluted/Waffle Face
Convoluted/Waffle Face
Convoluted/Waffle Face
Hex Face Pattern
Hex Face Pattern
Hex Face Pattern
Hex Face Pattern
Contour Recessed Back
Contour Recessed Back
Contour Recessed Back
Beveled Face
Beveled Face
Beveled Face
Domed Face
Domed Face
Black
Black
Yellow
Orange
White
Blue
Red
Orange
Yellow
Green
Black
Yellow
Green
Black
Yellow
Green
Black
Black
Yellow
6"
9"
7.5"
7.5"
7.5"
7.5"
7.5"
7.5"
7.5"
7.5"
7.5"
9"
9"
9"
6.5"
6.5"
6.5"
3"
3"
8206 or 8202
8256 or 8119
8202
8202
8202
8202
8202
8202
8202
8202
8202
8256 or 8119
8256 or 8119
8256 or 8119
8206 or 8202
8206 or 8202
8206 or 8202
8258 or 8259
8258 or 8259
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
#8118
#8117
#8242, #8243,
& #8244
#8120, #8121,
#8122, #8123,
& #8124
#8249, #8250,
& #8251
#8238, #8239,
#8240, & #8241
#8254 & #8255
BUFF&SHINE WOOL GRIP PADS
• When foam pads are not enough
• Use on paint that is badly damaged by oxidation or color sanding
#8245
#8116
PART
NO.
CROSS
REF.
DESCRIPTION
STYLE
COLOR
DIAMETER
USE WITH
PART NO.
QTY.
8116
8245
8246
8247
8248
8252
8253
803B
7503G
7503GY
803N
803NY
301G
301GY
Cutting
Cutting
Medium Cutting/Polishing
Cutting
Cutting Side 1/Polishing Side 2
Cutting
Medium Cutting
Pad Screws onto High Speed Buffer
Recessed Hook & Loop Grip Backing
Recessed Hook & Loop Grip Backing
Pad Screws onto High Speed Buffer
Pad Screws onto High Speed Buffer
Strong Washable Backing Structure
Strong Washable Backing Structure
Blue
White
Yellow
White
Yellow/White
White
Yellow
8"
7.5"
7.5"
8"
8"
3"
3"
No Backing Plate
8256 or 8119
8256 or 8119
No Backing Plate
No Backing Plate
8258 or 8259
8258 or 8259
1
1
1
1
1
1
1
#8248
#8247
#8246
#8252
#8253
BUFF&SHINE BACKING PLATES
• Helps absorb vibration & evenly distributes the weight and pressure of the machine
PART
NO.
CROSS
REF.
8119
8202
8206
8256
1975
658Y
600Y
1938
8257
700Y
8258
8259
358
350Y
#8119
DESCRIPTION
THICKNESS
THREAD
MAX RPM
DIAMETER
USE WITH
QTY.
Spoke Hook & Loop Design
Grip Pad Backing Plate
Grip Pad Backing Plate
High Speed Backing Plate
High Speed Backing Plate/
High Flex Edges
Backing Plate
Backing Plate with Flex Edge
0.75"
0.875"
0.5"
0.5"
5/8 x 11"
5/8 x 11"
5/16 x 24"
5/8 x 11"
3,000
3,000
6,000
3,000
7"
6"
6"
7"
High Speed Buffers
High Speed Buffers
DA Buffers
High Speed Buffers
1
1
1
1
0.5"
5/8 x 11"
3,000
7"
High Speed Buffers
1
0.5"
0.5"
5/8 x 11"
5/16 x 24"
3,000
6,000
3"
3.5"
High Speed Buffers
DA Buffers
1
1
#8202
#8257
CONNECT WITH IMPERIAL SUPPLIES
#8206
#8258
#8256
#8259
M61
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
S C R U B & WA S H B R U S H E S
WASH
BRUSHES
#82366
#82279
#82255
#82224
#82187
#82227
PART NO.
COMPATIBLE HANDLE
DESCRIPTION
BLOCK MATERIAL
HOLES
HOLE
STYLE
BLOCK
SIZE
BRISTLE
LENGTH
BRISTLE
MATERIAL
BRISTLE
COLOR
APPLICATIONS
QTY.
82187
82224
Wash brush
Black poly
1
Acme
24"
2.25"
Synthetic
Yellow
Washing
1
82224
82225
Wash brush
Black poly
1
Acme
10" x 3"
2.125"
Synthetic
Gray
Washing
1
82255
82225
Wash brush
Black poly
1
Acme
8" x 3"
2.5
Nylex
Green
Washing
1
82227
82225
Wash brush
Tan poly
1
Acme
14" x 3"
2.5
Nylon
Green
Washing
1
82279
82219, 82213, 82221
Wash brush
Hardwood
1
Acme
8.25 x 3"
1.25"
Tampico
Yellow
Washing / acid
1
82366
82225, 82184
Wash Brush
Gray poly
1
Acme
10" x 3.75
2.25
Polypropylene
Blue
Washing
1
DELUXE CONTOURED TIRE BRUSH
SCRUB BRUSHES
• Non slip comfort grip handle.
• Super stiff contoured bristles.
• Size: 7-3/4" x 5-3/4 x 5"
• Black bristles with black handle.
• Excellent for cleaning fenders, wheels, grills and spokes.
• Durable handle.
PART NO.
QTY.
82271
1
#82218
21-1/2"
WHEEL DETAIL BRUSH
• Non slip comfort grip handle.
• Safe for all wheels.
• Size: 11-3/4" x 2-1/2" x 2-1/2"
• Black bristles with black handle.
PART NO.
QTY.
82272
1
#82216
PART NO.
FILL
MATERIAL
TRIM
LENGTH
OVERALL
LENGTH
QTY.
82216
82218
Synthetic
Synthetic
2"
2"
10"
21-1/2"
1
1
SQUEEGEES
SQUEEGEE
SQUEEGEE HEAD
WITH ACME THREADS
• Comes complete with textured handle and built-in bug remover.
• An 8" nylon net-covered sponge makes short
work of windshield bugs and dirt.
• Wipes window clean with
an 8" pliable rubber blade.
• Handle is available in
various lengths.
• Thread Style: Weller
PART NO.
DESCRIPTION
HANDLE
LENGTH
QTY.
70440
70442
70445
70447
70449
8" Rubber Squeegee
8" Rubber Squeegee
Replacement Head
Plastic Handle
Aluminum Handle
20"
42"
—
20"
42"
1
1
1
1
1
• Nylon net covered sponge.
• Pliable rubber blade.
• Acme thread compatible.
PART NO.
DESCRIPTION
LENGTH
QTY.
70448
70447
Squeegee Head
Plastic Handle
8"
20"
1
1
10" SQUEEGEE WITH TELESCOPING HANDLE
• Zinc plated head.
• Handle telescopes to a length of 7'.
• 10" pliable rubber blade.
• Includes a "bug removing" sponge.
PART NO.
70446
70466
M62
CALL
1-800-558-2808 /
FAX
DESCRIPTION
QTY.
10" Squeegee with
Telescoping Handle
Replacement Head
1-800-553-8769 /
4
1
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
WA S H
ZEP® PROFESSIONAL TRUCK AND
TRAILER WASH
HURRAH CAR WASH
CONCENTRATED DETERGENT
• Cleans exhaust deposits, road film and bug residues from
heavily worked trucks and trailers in just one application,
without scrubbing or brushing.
• Color: Clear, colorless
ATE
• Odorless
CONCENTR
• No Flashpoint
• High foaming, pH neutral detergent for
automatic drive-thru car wash facilities.
ATE
• Streak-free, lubricates brushes.
CONCENTR
• Safe for all car finishes.
• Dilution Ration: 1/2 oz per gallon of water
• Freight not included.
PART NO.
NET WEIGHT
QTY.
PART NO.
NET WEIGHT
QTY.
7168
1 gal
4
820001
55 gal
1
ALL-VEHICLE WASH CONCENTRATE
TURTLE WAX® ICE® CAR WASH
• Formulated with a blend of surfactants and special paint
conditioners that gently wash away dirt, road grime and dust
leaving behind an incredible sparkling shine.
• Clean rinsing formula will not leave any soap film or water spots.
• Completely biodegradable formula that is safe for all finishes.
• The perfect compliment to the ICE collection of car care products.
PART NO.
NET WEIGHT
QTY.
5766
64 oz
6
85502
85502-4
IMPERIAL® BUG & TAR REMOVER
• Concentrated cleaner that removes bugs and tar.
• Safe on all finishes.
• Apply a generous amount of bug remover for "baked" on
contaminants. Allow to soak for a minute before wiping clean.
PART NO.
NET WEIGHT
QTY.
4605
1 gal
2
• Controlled foam formula can be used on trucks, buses and
tractor trailers safely and effectively.
• Super concentrated, instant acting and free rinsing.
• For use with all cleaning methods.
• USDA Authorized Class A-4.
ATE
CONCENTR
PART NO. NET WEIGHT QTY.
1 gal
1 gal
1
4
PRO SERIES SIMPLE GREEN® MAX™
AUTO CLEANER & DEGREASER
• Cuts through brake dust,
road tar, bug juice and oil.
• Non toxic, biodegradable.
• Non abrasive.
PART NO.
NET WEIGHT
QTY.
85624
32 oz
12
Save time reordering the products your shop needs.
Visit imperialsupplies.com and try Auto-Reorder today.
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M63
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
TIRE & WHEEL CLEANERS
SIMONIZ® PRISM
WATER-BASED DRESSING
SIMONIZ® BLACK BACK
SOLVENT-BASED DRESSING
• High gloss long lasting water-based "gel" dressing.
• Apply manually.
• High gloss, solvent-based dressing for exterior rubber
trim and tires.
• Restores faded bumpers, wheel openings and
body-side molding
to a "new look".
• Water-Resistant.
• Spray directly or apply to foam applicator pad and dress
to desired gloss.
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
9302-4
Water-Based Dressing
1 gallon
4
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
9300-4
Solvent-Based Dressing
1 gallon
4
SIMONIZ® IN & OUT SURFACE DRESSING
• Thick, highly viscous surface dressing
• Used for tires, trim, dash, leather, etc
• Best applied through squeeze bottle
• Excellent gloss and durability
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
9320-4
Water-Based Dressing
1 gallon
4
SIMONIZ® RESINATE
SOLVENT-BASED DRESSING
• High quality protectant that restores unpainted molding
and rubber to a "like new" dark color.
• Spray and wipe.
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
9301-4
Solvent-Based Dressing
1 gallon
4
ZEP® PROFESSIONAL TIRE DRESSING
• Formulated with silicone, this high-gloss, waterresistant spray gives tires a uniform, long-lasting
glossy finish that protects as it shines
• VOC compliant formulation
SIMONIZ® EXTREME SHINE
• High gloss solvent-based dressing for tires
and exterior black trim
• Applies easily leaving a durable gloss finish
PART NO.
NET WEIGHT
QTY.
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
7850
12 oz
12
9336-4
Solvent-Based Dressing
1 gallon
4
C H R O M E & M E TA L P O L I S H E S
3M™ MAG & ALUMINUM POLISH
• Safely removes oxidation, water spots, stains, brake
dust and other residue from non-coated magnesium and
aluminum wheels.
• Color: Pink
• Paste Consistency
PART NO.
DESCRIPTION
NET WEIGHT
QTY.
74080
Mag & Aluminum Polish
8 oz
1
Nicki
Customer Services/Sales
Support Manager
Loyal…
“I work for my customers. That’s
how I look at it, because it’s
true. I have a role to play in their
success.”
M64
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
VEHICLE CLEANING & APPEARANCE
R E S T O R AT I O N & R E PA I R K I T S
LIGHTRITE™ HEADLAMP RESTORATION KIT
3M™ HEADLIGHT LENS RESTORATION SYSTEM
• LightRite™ is a state-of-the-art, sprayed on chemical formula that renews your
old, hazy headlights, bringing them back to their original crystal clear brilliance.
• Kit includes:
» (1) aerosol can/Services 1 vehicle
» (2) sheets of 600 grit wet sandpaper
» (2) alcohol towels
» (2) lint free towels
» (1) instruction sheet (English & Spanish)
• Four step process restores the clarity of yellowed, hazed or dull headlight lenses.
• Kit includes:
» (1) Disc Pad Holder
» (1) 3M Soft Interface Pad
» (6) 3M Sanding Discs
» (4) 3M Finishing Discs
» (1) 3M Trizact Disc
» (1) 3M Headlight Lens Polish, 1 oz
» (1) Buffing Pad
• Use with a standard drill (1200-1600 rpm).
PART NO.
QTY.
9188
1 kit
PART NO.
CROSS
REFERENCE
QTY.
9178
39008
1 kit
UV CURING WAND
• Use with LightRite™ headlamp restoration kit, Part
No. 9188, for curing indoors or on cloudy days.
• Cures the LiteRite coating in approximately 1-2
minutes depending on the size of the lens.
• Use to cure any product which requires a UV light.
• Part No. 84706 contains two bulbs.
PART NO.
DESCRIPTION
QTY.
84706
84706-2
UV Curing Wand
Replacement Bulb
1
1
PERMATEX® REAR WINDOW DEFOGGER
ADHESIVE TABS
• Permanently bonds defogger tab to rear window grid.
• High electrical conductivity.
• Resistant to extreme weather conditions.
• Excellent performance.
• Temp resistance: -30° F to 180° F
• Cure time:
»Initial: 2 minutes
»Full Cure: 24 hours
WINDSHIELD REPAIR KIT
• Repairs 90% of stone damage up to 1".
• Not recommended for cracks.
• Makes crystal clear repair.
• Repair finished in approximately 30-35 minutes.
• Complete, easy-to-use kit includes:
» (3) syringes
» (1) instruction guide
» (1) sealing patch
» (1) sealant liquid applicator
PART NO.
NET WEIGHT
QTY.
7564
.17 fl oz
2 kits
PART NO.
CROSS
REFERENCE
NET WEIGHT
QTY.
9209
21351
0.6 ml
6
PERMATEX® WINDSHIELD REPAIR KIT
• The first one-component windshield repair
system designed to be used by the mechanic.
• Requires no mixing, no heat.
• Has the same index of refraction
as the original glass to make
repair virtually undetectable.
PART NO.
CROSS
REFERENCE
NET WEIGHT
QTY.
9186
16067
.17 fl oz
2 kits
WINDOW REPAIR STRIPS AND RESIN
• Best quality for clear windshield repair.
• Complete more than 100 repairs with Pit Filler.
• Complete more than 50 repairs with Windshield Resin.
PERMATEX® REARVIEW
MIRROR ADHESIVE KIT
• Single use applications.
• Approved and used by GM, Ford and Chrysler.
• Permanently remounts mirrors to windshields.
• Achieves handling strengths in seconds.
• Includes primer and adhesive.
PART NO.
DESCRIPTION
SIZE/WEIGHT
QTY.
7583
7581
7582
Curing Film Strips
Pit Filler Repair Resin
Windshield Repair Resin
1" x 10"
7.5 ml
15 ml
100
1
1
PART NO.
CROSS
REFERENCE
QTY.
9189
81844
12 kits
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M65
WELDING
WELDING
WELDING RODS
SERIES 892 – FOR CAST IRON – ENi – Ci
SERIES 893 – FOR CAST IRON – ENFe – Ci
• Maximum machinability.
• Premium electrode for welding cast iron, maximum machinability.
• Tensile strength: 50,000 psi, (345N/2)
• Applications: Low temperature welding in all positions; arc pulsates to help prevent
over-heating. Repairs breaks and cracks in engine blocks, gear housing and
machine bases. Also used for joining cast iron to steel, iron, stainless steel, copper,
etc.
• High strength.
• Premium alloyed electrode for high strength welding of cast iron.
• Tensile strength: 80,000 psi, (551N/mm2)
• Applications: For fabrication and difficult repair of all gray and alloyed cast irons.
Recommended for welding cylinder heads, gear housings, levers, repairing teeth of
cast gears and build-up of missing sections.
PART NO.
DIAMETER
AMPERAGE
POLARITY
QTY.
89202
1/8
55 - 110
AC or DC straight, electrode ( - )
5 lb
PART NO.
DIAMETER
AMPERAGE
POLARITY
QTY.
89302
1/8
65 - 120
AC or DC straight, electrode ( - )
5 lb
SERIES 895 – FOR MILD STEEL – E6013
SERIES 894 – FOR ALUMINUM – E4043
• Premium aluminum electrode.
• Tensile strength: up to 34,000 psi, (234N/mm2).
• Applications: Can be used as an arc rod or brazing rod in repairing of automotive,
truck and bus parts. For tanks, pipes , ladders, shelves, refrigeration equipment and
other aluminum parts.
PART NO.
DIAMETER
AMPERAGE
POLARITY
QTY.
89401
89402
89403
3/32
1/8
1/8
50 - 80
80 - 130
70 - 120
DC reverse, electrode ( + )
DC reverse, electrode ( + )
DC reverse, electrode ( + )
5 lb
5 lb
10 pcs
• Premium general purpose electrode for welding low carbon steels.
• Applications: Can be bent to reach hard to get at areas. Excellent restrike
characteristics. Used on thin, medium, heavy and dissimilar gauges and steels.
PART NO.
DIAMETER
AMPERAGE
TENSILE STRENGTH
POLARITY
QTY.
89501
89502
89503
89504
89505
89506
89507
89508
89509
3/32
1/8
5/32
3/32
1/8
5/32
3/32
1/8
5/32
35 - 80
65 - 125
90 - 160
40 - 80
70 - 120
130 - 160
40 - 80
70 - 120
130 - 160
80,000 psi, (552N/mm2)
80,000 psi, (552N/mm2)
80,000 psi, (552N/mm2)
60,000 psi
60,000 psi
60,000 psi
60,000 psi
60,000 psi
60,000 psi
AC, DCEN, or DCEP
AC, DCEN, or DCEP
AC, DCEN, or DCEP
AC, DCEN, or DCEP
AC, DCEN, or DCEP
AC or DCEP
AC, DCEN, or DCEP
AC, DCEN, or DCEP
AC, DCEN, or DCEP
10 lb
10 lb
10 lb
5 lb
5 lb
5 lb
10 lb
10 lb
10 lb
SERIES 896 – FOR DIRTY OR RUSTY MILD STEEL – E6011
SERIES 898 – FOR HIGH ALLOY STEEL – E312
• Premium electrode for welding extremely dirty,
greasy, oil soaked and/or rusty steels.
• AC or DC, either polarity.
• Tensile strength: 85,000 psi
• Applications: Welds are easily made on equipment that is covered
with grease, sand and paint that can’t be cleaned before welding.
• Premium electrode for high alloy steel
• Tensile strength: as welded: up to 120,000 psi, (827N/mm2); work hardens: up to
180,000 psi, (1241N/mm2).
• Applications: Welding low, medium and high alloy steels requiring the highest
strength and quality. Commonly used for joining steels of unknown composition
including stainless steel. Ideal for repairing tools, dies, springs, carbon steel, stainless
steel, pressure vessels, vanadium-moly spring steel used for rebuilding shafts and
blades. Also for broken stud removal.
PART NO.
DIAMETER
AMPERAGE
TENSILE
STRENGTH
QTY.
89601
89602
89604
89605
89608
89612
3/32
1/8
3/32
1/8
1/8
1/8
20 - 100
30 - 140
60 - 90
80 - 125
80 - 125
80 - 125
85,000 psi
85,000 psi
60,000 psi
60,000 psi
60,000 psi
60,000 psi
10 lb
10 lb
5 lb
5 lb
10 lb
25 lb
PART NO.
DIAMETER
AMPERAGE
POLARITY
QTY.
89800
89801
89802
1/16
3/32
1/8
30 - 40
40 - 80
65 - 120
AC or DC reverse, electrode ( + )
AC or DC reverse, electrode ( + )
AC or DC reverse, electrode ( + )
5 lb
5 lb
5 lb
7018 WELDING ROD
• Low-hydrogen electrode.
• Use in all positions on low, medium and high carbon steels.
• Ideal for out-of-position welding and tacking.
• Runs on AC or DCEP (reverse) polarity.
• Not recommended for low-voltage AC welders.
7014 WELDING ROD
• Ideal for applications requiring light
penetration and faster travel speeds.
• Runs in all positions on AC or DCEN
(straight) or DCEP (reverse) polarity.
PART NO.
DIA.
TENSILE
STRENGTH
89852
1/8
70,000 psi
M66
CALL
QTY.
5 lb
1-800-558-2808 /
FAX
PART NO.
DIA.
AMPS
TENSILE
STRENGTH
QTY.
89901
89902
3/32
1/8
80-100
60-150
70,000 psi
70,000 psi
5 lb
5 lb
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
WELDING
WELDING RODS
ALUMINUM ROD – 4043
STAINLESS STEEL ROD – 309L
• Aluminum welding for flat, horizontal
and vertical applications.
• DC only.
• Recommended for welding the heat-resistant
types 309/309L stainless steels.
• Used for joining stainless steel to carbon and
low alloy steels.
• Excellent for welding AISI types 405, 410, 430,
and 442 when pre-heating is not practical.
• Has a lime-rutile coating that is designed to
operate on DCEP or AC in all positions.
• Very stable arc and negligible spatter level.
• Excellent strike and re-strike.
PART NO.
DIA.
AMPS
QTY.
89403
1/8
70-120
10 rods
STAINLESS STEEL ROD – 308L
• For 308 and 304 stainless base metals.
• Runs on AC or DCEP (reverse) polarity.
PART NO.
DIA.
LENGTH
AMPS
89804
89080
1/8
3/32
14"
36"
80 - 120 5 rods
—
10 lbs
QTY.
PART NO.
DIA.
AMPS
TENSILE STRENGTH
QTY.
89805
1/8
80-120
85,000 psi
5 lb
BRAZING RODS
SERIES 891 – FOR STEEL
• High strength, multi-temperature brazing alloy for joining and wear
resistant build-up (torch or induction).
• White flux.
• Applications: Overlaying and build-up of gear teeth, bearing shafts, steering
knuckles and broken drills and attaching carbide cutting tips.
PART NO.
DIAMETER
LENGTH
TENSILE STRENGTH
QTY.
89100
89101
1/16
3/32
18"
18"
90,000 psi
90,000 psi
5 lb
5 lb
WELDING ROD CABINET
• Cabinet size: 16-1/2" W x 8" H x 18-1/16" D
• Six compartments, each size: 5-1/4" W x 4" H x 18-1/16" D
• Holds welding rods up to 18" long.
• All steel construction.
PART NO.
QTY.
3800
1
CHOOSING A WIRE …
WELDING WIRE THICKNESS CHART
RECOMMENDED WIRE SIZES
Material
Thickness
CHOOSING AN ELECTRODE…
ELECTRODE POLARITY CHART
ELECTRODE
DC*
AC
POSITION
PENETRATION
USAGE
6011
6013
7014
7018
7018 AC
Ni-Cl
308L
EP
EP,EN
EP, EN
EP
EP
EP
EP
3
3
3
3
3
3
3
All
All
All
All
All
All
All
Deep
Low
Med
Low
Low
Low
Low
min. prep, rough, high spatter
general
smooth, easy, fast
low hydrogen, strong
low hydrogen, strong
cast iron
stainless
GASLESS FLUXCOLORED WIRE
MIG SOLID WIRE
.024"
.030"
.035"
.045"
.030"
.035"
24 Gauge (.025)
22 Gauge (.031)
20 Gauge (.037)
18 Gauge (.050)
16 Gauge (.063)
14 Gauge (.078)
1/8" (.125)
3/16" (.188)
1/4" (.25)
5/16" (.313)
3/8" (.375)
Multi-pass welding or a beveled joint design may be required on material thickness
3/16" and greater depending on your welding machine’s amperage capability.
PERSONAL CUSTOMER SERVICE / SAME DAY SHIPPING / NO RISK GUARANTEE
M67
SHOP SUPPLIES
WELDING
WELDING WIRE
WELDING & TORCHING ACCESSORIES
SOLID CARBON-STEEL WELDING WIRE – E70S-6
WELDING TIP FOR MIG WELDER
• Excellent weldability with or without shielding gas.
• Weld-it™ MIG wires have minimal spatter and easy slag clean up.
• Primary applications: construction work, farm implement,
fabrication, shaft build-up, tanks, truck bodies
and general shop application with poor fit-up
or rusty, oily plates.
• Compatible with Miller Millermatics.
• Hobart Handler 125, 135, 140, 175 and 180.
• IronMan 210 and 250.
• Later Beta-MIG 1800 and 2510.
PART NO.
DIA.
AMPS
TENSILE
QTY.
89082
89084
89085
.035
.030
.035
100-150
50-100
100-150
70,000 psi
70,000 psi
70,000 psi
2 lb roll
10 lb roll
10 lb roll
PART NO.
OPENING
SIZE DIA.
QTY.
89087
89092
.030
.035
5
5
OXYACETYLENE HOSE SET
FLUX CORED/CARBON STEEL
WELDING WIRE – E71T-11
• One red and one green.
• Kink proof.
• Rated for 100 psi.
• Excellent weldability with or without shielding gas.
• Weld-it™ MIG wires have minimal spatter and easy slag clean up.
• Great in single or multi pass welds.
• Used for light structural, machinery part
fabrication, prefab construction, railroad
car repair, short assembly welds, tanks
and general fabrication.
PART NO.
DIA.
AMPS
TENSILE
QTY.
89086
.030
125
91,000 psi
2 lb roll
DIA.
AMPS
TENSILE
QTY.
.030
.035
60-100
100-160
27,000 psi
27,000 psi
1 lb roll
2 lb roll
LENGTH
QTY.
25'
1
• Hand or machine cutting acetylene
nozzle for general purpose use.
• Medium preheat sufficient for beveling.
• Tip Type: cutting (1 piece)
• Fuel Gas: acetylene
• Tip series: 4202
• ER 4043 aluminum wire.
• Excellent weldability with or
without shielding gas.
• Weld-it™ MIG wires have minimal
spatter and easy slag clean up.
PART NO.
DIA.
3/16
PUROX STYLE CUTTING TIP
ALUMINUM WELDING WIRE – ER4043
89090
89091
PART NO.
89002
PART NO.
TIP SIZE
QTY.
89009
89010
89003
4
5
7
1
1
1
ELECTRODE HOLDER
• Accepts rods up to 3/16" in 45°, 90° or 180° positions.
• Solid brass spring-loaded jaws.
• Heavy duty— Most popular of all sizes, handles
rods to 1/4", suited for all welding jobs,
the choice of many professional welders.
ALUMINUM WELDING WIRE – ER5356
• ER 5356 aluminium wire.
• General-purpose type aluminum alloy, which is typically
chosen for its relatively high shear strength.
• Excellent corrosion resistance when exposed to salt water.
• Should be used for welding
5000 series aluminum base metals.
PART NO.
DIA.
AMPS
TENSILE
QTY.
89093
89095
.030
.035
60-100
60-100
30,000 psi
30,000 psi
1 lb roll
1 lb roll
PART NO.
AMP.
MAX
ROD SIZE
QTY.
89024
89025
89071
200
300
350
3/16
1/4
1/4
1
1
1
STAINLESS STEEL SPOOL – ER308L
400 AMP, SCREW TYPE ELECTRODE HOLDER
• Extra low carbon wire for the welding of type 301, 302
304, 305, and 308 stainless steels.
• A quarter turn of the handle loosens the rod for removal or replacement.
• Accepts rods up to 5/16" and #2 cable.
PART NO.
DIA.
AMPS
TENSILE
QTY.
PART NO.
AMP.
QTY.
89083
.030
150-225
80,000 psi
2 lb
89026
400
1
M68
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
WELDING
SOLDER
LEAD FREE SOLID WIRE SOLDER
ACID SOLDER
• For non-electrical applications.
• Solid wire solders must be used with a paste or liquid flux.
• Can be used to repair copper tubing.
• Use a soldering iron or propane torch.
• General purpose, for applications such as plumbing,
gutters, radiators and other non-electrical repair.
PART NO.
WIRE
DIA.
TENSILE
PSI
MELTING
POINT
ROLL
SIZE
QTY.
82126
82127
.125
.125
6,400
6,400
430° F
430° F
1/2 lb
1 lb
1
1
PART NO.
DIA.
COMPOSITION
82105
.125
40% tin/60% lead 1 lb Roll
SIZE
QTY.
1
SILVER SOLDER
• High strength for refrigeration tubing and
food service equipment.
• Acid flux core.
LEAD FREE ACID CORE SOLDER
• For non-electrical applications.
• Flux core which is a highly active cleaner.
Can be harmful to electrical connections
and possibly create a short circuit.
• General purpose solders can be used to repair tools,
radiators, general automotive and sheet metal.
• Use with soldering iron, propane, or mapp torch.
PART NO.
DIA.
COMPOSITION
SIZE
QTY.
82106
.125
98% tin/2% silver
1 lb Roll
1
ELECTRONIC SOLDER
PART NO.
WIRE
DIA.
TENSILE
PSI
MELTING
POINT
SIZE
82123
82124
82125
.062
.125
.125
6,400
6,400
6,400
430° F
430° F
430° F
.05 oz Tube 2
1/2 lb Roll 1
1 lb Roll
1
QTY.
• Rosin core solder.
• A low melting alloy with fast acting flux for
fine radio electrical soldering.
PART NO.
DIA.
COMPOSITION
82115
.032
60% tin/40% lead 1/2 lb Roll
SIZE
QTY.
1
LEAD FREE ROSIN CORE SOLDER
• Energized rosin flux core to cleanse parts as you solder.
• Electrical solders can be used to repair speaker
wires, motors, generators, printed circuit boards,
C.B., ham radios, TVs and computers.
• Use with a soldering iron or gun.
PART NO.
WIRE
DIA.
TENSILE
PSI
MELTING
POINT
SIZE
82120
82121
82122
.062
.062
.093
6,400
6,400
6,400
430° F
430° F
430° F
.05 oz Tube 2
1/2 lb Roll 1
1 lb Roll
1
QTY.
ROSIN SOLDER
• For general electrical work where a
non-corrosive flux is required such as
appliances, wiring motors and generators.
PART NO.
DIA.
COMPOSITION
SIZE
QTY.
82104
.093
40% tin/60% lead
1 lb Roll
1
ROSIN CORE SOLDER WITH DISPENSER
• A low melting alloy with fast acting flux for fine radio electrical soldering.
PART NO.
DIA.
SIZE
QTY.
82110
.050
1.1 oz
2
SEE PAGE M71
Welding Workwear
SOLDER ASSORTMENT
• Includes:
» 1 roll Rosin Solder 40/60 Tin-Lead, Part No. 82104.
» 1 roll Acid Solder 40/60 Tin-Lead, Part No. 82105.
» 1 can Rosin Solder Flux, Part No. 82107.
PART NO.
QTY.
82100
1
CONNECT WITH IMPERIAL SUPPLIES
M69
SHOP SUPPLIES
WELDING
WELDING AND TORCHING ACCESSORIES
BRAZING FLUX
SOAPSTONES AND HOLDERS
• Use with bare bronze.
• Cleans surfaces well for good adhesion.
• Natural soapstone is used for temporarily
marking metals during fabrication.
• Will not contaminate welds.
• Also used for marking textiles.
PART NO.
NET WEIGHT
QTY.
82111
8 oz
1
PART NO. DESCRIPTION
72084
72085
72086
72087
NOZZLE GEL
• Prevents adhesion of weld splatter to
MIG nozzle and weld surface.
PART NO.
NET WEIGHT
QTY.
82112
16 oz
1
SIZE
QTY.
Flat holder
Round holder
Flat soapstone
5" x 1/2 x 3/16"
Round soapstone 5" x 1/4"
2
2
8
8
PENCIL SCRIBE
• Pen style scribe with tungsten carbide tip.
SOLDER FLUX
• Removes tarnish or metal oxidation
and prepares the surface for soldering.
• Cleans soldering gun tip.
PART NO.
NET WEIGHT
QTY.
82107
2 oz
4
PART NO.
QTY.
89006
1
ACID BRUSH
ANTI-SPATTER SPRAY
PART NO.
SIZE
WIDTH
QTY.
82108
6"
1/2"
25
• Prevents adhesion of weld splatter to
MIG nozzle and weld surface.
• Can Size: 20 oz
PART NO.
DESCRIPTION
QTY.
Single Flint Striker, 5 Flints
Replacement Flints
Triple Flint Striker
Replacement Flint Cartridge,
Three Flints Per Cartridge
2
25
2
PART NO.
NET WEIGHT
QTY.
89059
89065
89063
82113
16 oz
1
89066
3M™ WELD-THRU COATING II
PART NO.
NET WEIGHT
QTY.
12.75 oz
6
QTY.
1
#89060
PART NO.
DESCRIPTION
QTY.
89060
89007
Cone and chisel
Brush with chisel
1
1
#89007
MEDIUM LOCKING
C-CLAMP PLIERS
• Lifts up to 50 lb.
• Holds steel in place at 45°, 90° and 35° angles.
PART NO.
#89063
• Durable hammers efficiently remove
slag and debris from welds.
LARGE MAGNETIC HOLDER
89004
6
CHIP HAMMERS
• Aerosol coating designed to be applied to metal surfaces prior
to welding to provide corrosion protection after welding.
• Dries fast with minimum spatter.
• Meets MIR requirements.
82114
#89059
STRIKERS
PART NO.
QTY.
89005
1
FLAME SHIELD/PROTECTOR
• Protects wood, metal, and painted surfaces from the heat and flame of a torch.
• Made from durable, ceramic fiber material with an aluminum backing.
• Non-asbestos and does not give off odor or smoke.
• Especially designed for use in the following
soldering and piping applications: plumbing, refrigeration,
air conditioning, heating and maintenance.
WELDING TIP CLEANERS – FILE TYPE
• Stainless steel wire files for cleaning the gas
orifices of cutting and brazing tips.
• 12 files from 49 to 75, plus
a tip file in aluminum case.
PART NO.
QTY.
PART NO.
SIZE
QTY.
89056
1
82129
6" x 8" x 1/2"
1
M70
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
WELDING
WELDING WORK WEAR
GOGGLES
WELDER'S CAP
• Wrap-around design for superior protection.
• Pliable black frame provides excellent durability.
• Lenses have fogless, scratch-resistant, static free coating.
• Virtually 100% UV blocking feature.
• Direct and indirect ventilation provide added comfort.
• Elastic band makes these a great choice
for use under welding helmets.
• Meets ANSI and CE standards.
• Quilted design.
• One size fits most.
• Treated to resist fire.
• Washable.
PART NO.
DESCRIPTION
QTY.
4955
Clear Lenses
1
PART NO.
QTY.
5037
1
Do not use for welding
PART NO.
DESCRIPTION
QTY.
4987
89012
89023
Welding Goggle
Replacement Filter Lenses, #12 Plastic
Replacement Filter Lenses, #5 Plastic
1
5
5
• Leather glove with cotton lining and blue trim.
• Gunn pattern cut.
COLOR
SIZE
QTY.
Brown
Large
1 pr.
PREMIUM WELDING GLOVES
• Premium select side leather.
• Reinforced palm.
• Wing thumb for ease of movement.
• Seams sewn with Kevlar®.
• Flame-resistant cuff liner.
PART NO.
COLOR
SIZE
QTY.
89525
Blue
Large
1 pr.
ECONOMY WELDING GLOVES
• Select shoulder split leather with black cotton lining.
• Wing thumb for ease of movement.
• Heat resistant and durable.
SIZE
QTY.
Large
XL
2X
1
1
1
PART NO.
SIZE
QTY.
89055
24" x 36
1
SATEEN WELDING SLEEVES
WELDING GLOVES
PREMIUM WELDING GLOVES
PART NO.
89521
89522
89523
• All leather bib apron with leather tie straps.
• Flip-up front plate for easy viewing of work.
• Flexible green PVC body with direct venting.
• Uses standard 2" x 4-1/4" size cover and filter lens.
• Meets ANSI Z87.1.1989 standards.
• Includes #5 filter lens.
PART NO.
SATEEN WELDING JACKET
WELDER'S LEATHER APRON
TORCH AND GAS WELDING GOGGLE
89050
QTY.
2
• Treated fabric conforms to Federal Test Method 191.5903 for flame resistance.
• Retains flame retardancy for up to 50 normal washings.
• Comfortable protection from sudden flame
exposure, light molten splash and sparks.
• 100% green cotton sateen material.
• Other features include: full sizing,
anodized snaps, reinforced snap front,
snaps at sleeve, inside pocket.
BRAZING GLASSES
• Meets ANSI Z87.1 standards.
• High impact polycarbonate Lenses.
• Scratch-resistant coating.
• Shade #5 green Lenses.
• Gun metal frame/green side shields.
• Virtually 100% ultraviolet protection.
• Soft adjustable nose piece.
PART NO.
89053
• 2-1/4" heavy-duty elastic bands at both ends of the sleeve.
• Green cotton sateen fabric.
• Cool and comfortable for economical protection from sudden
flame exposure, light molten splash and sparks.
• Fabric treated for flame resistance. Conforms to Federal
Test Method 191.5903 for flame resistance.
• Retains flame retardancy for up to
50 normal washings.
PART NO.
LENGTH
QTY.
89520
18"
1 pr.
LEATHER WELDING SLEEVES
• Snap wrist closure with
adjustable shoulder straps.
• 23" leather sleeves.
• One pair includes left and right sleeves.
PART NO.
QTY.
89054
1 pr.
LEATHER SHOE PROTECTOR FOR WELDING
• Premium heavy duty leather shoe protector.
• Adjustable to boot size, one size fits all.
• Anodized leather reinforced snaps
to prevent arc flashback.
• Riveted in all major stress points.
PART NO.
COLOR
SIZE
QTY.
PART NO.
QTY.
89524
Gray
Large
2 pr.
88168
1 pr.
ORDER ANYTIME. ANYWHERE. DOWNLOAD THE IMPERIAL APP.
M71
SHOP SUPPLIES
WELDING
WELDING HELMETS
WELDING HELMET
• Lightweight poly welding helmet with adjustable headgear.
• Lift front lens that has a #10 shade.
• Lens cover plate for added protection.
• View Area: 2" x 4-1/2".
PART NO.
DESCRIPTION
QTY.
89027
89008
88095
Helmet
Replacement Headgear
Replacement Lens Cover
1
1
5
SHADE #10 PASSIVE
WELDING HELMET
• Made of tough poly for durability with fully adjustable ratchet headgear.
• Fixed lens that has a #10 shade.
• Lens cover plate for added protection.
• View Area: 4-1/2" x 5-1/4".
PART NO.
DESCRIPTION
QTY.
89028
89008
Helmet
Replacement Headgear
1
1
AUTO-DARKENING WELDING HELMET
• Large viewing area - 3.82" – 1.81" (6.91 sq. inches).
• Shades #9 to #13 variable shade, light state #4.
• 1/12,000 switching speed.
• 2 independent arc sensors.
• Weld and grind mode (External Control).
• Sensitivity and delay controls (Internal Controls).
• Auto On/Auto Off.
• Low battery indicator.
• Lightweight Polyamide Shell.
• Accepts magnifying cheater lenses.
• ANSI Z87.1-2010, CE, CSA Certified
• Included 5 outside and 2 inside cover lenses.
PART NO.
DESCRIPTION
QTY.
88098
Helmet
1
REPLACEMENT LENSES
89013
Front Outside Lens
Back Inside Lens
QTY.
5
2
4" x 4-1/2
1-3/4 x 4-1/2
1
WELDING HELMET
• Variable shade weld lens adjusts from shade 9 to 13.
• Adjustable sensitivity weld lens.
• Solar powered, ultra thin design lens.
• Less than 1 millisecond switching speed.
• Meets ANSI Z.87.1-2003 standards.
• Durable, heat resistant helmet with elongated bib design.
• Ratchet headgear.
• Perfect for TIG welding.
• View Area: 5-1/4" x 4-1/2".
PART NO.
VIEW AREA
QTY.
88093
89030
Helmet
Headgear
1
1
M72
CALL
1-800-558-2808 /
FAX
1-800-553-8769 /
WWW.IMPERIALSUPPLIES.COM
SHOP SUPPLIES
WELDING
WELDING HELMETS
ADVANTAGE WELDING HELMET
• Solar powered fixed shade 10 quick change lens.
• Constant UV/IR protection.
• Less than 1 millisecond switching speed.
• Ratchet headgear.
• Meets ANSI Z.87.1-1989 standards.
• View Area: 4-1/2" x 5-1/4".
PART NO.
DESCRIPTION
QTY.
88084
89030
88097
Helmet
Replacement Headgear
Lens Cover
1
1
2
HOBART® IMPACT™ VARIABLE SHADE WELDING HELMET
• Battery powered with solar-assist uses one CR2450 lithium battery (included).
• Large Viewing Area: 3.81" x 1.85"
• Reaction time is 1/25,000 of a second.
• LCD lens with solar-charging panel, 100% ultraviolet and infrared protection.
• Adjustable variable shades #8-13, light state #3.
• Includes:
» (3) Front Lens Covers
» (2) Back Lens Covers
» (3) Independent arc sensors provide continuous arc-sensing capability
• Ratchet style headgear with CoolMax® odor-absorbing sweatband
• Meets ANZI Z87.1-2010/CSA/CD standards.
• Max weld amps for lens shade: up to 300 amps
• View through the lens before welding begins for easy setup and more accurate welds.
• Lens automatically darkens when arc is detected.
• Two-year warranty.
• Color: Flat black
PART NO.
DESCRIPTION
QTY.
88089
89029
Welding Helmet
Replacement Headgear
1
1
FACE SHIELD WITH CUTTING/BRAZING
WINDOW AND HARD HAT ATTACHMENT
• Combination clear anti-fog window with Shade 5 IR flip-up lens for use in grinding,
cutting and brazing operations.
• Clear anti-fog window for grinding.
• Shade 5 IR window for cutting and brazing.
• Includes Zip Clip for attaching face shield to unslotted hard hats and bump caps.
• Meets ANSI Z87.1-2003 Standards.
• Hard had sold separately.
PART NO.
DESCRIPTION
VIEW AREA
QTY.
89018
89031
89033
Face Shield Attachment
Replacement Shade #3 Lens IR Window
Clear Replacement Lens For DP4
12" x 8"
–
–
1
1
REPLACEMENT LENSES
REPLACEMENT LENSES
• Lenses and plates are precision ground and optically perfect to offer
ultimate protection against impact hazards, ultra-violet and infrared rays.
PART NO.
SIZE
COLOR
DESCRIPTION
FOR USE WITH
QTY.
89015
89020
88095
89022
89011
2" x 4-1/4
2" x 4-1/4
2" x 4-1/4
4-1/2 x 5-1/4
4-1/2 x 5-1/4
Green
Clear
Clear
Dark Green
Clear
#10 polycarbonate filter lenses.
Plastic safety plate for helmets.
Polycarbonate lens
#10 glass filter lenses.
Polycarbonate safety plate
89027
89027
89027
89028
89028
2
5
5
2
5
NATIONAL DISTRIBUTOR OF QUALITY MAINTENANCE SUPPLIES SINCE 1958
M73
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement