Quick Start Guide

Quick Start Guide
!
MultiBio 700 Installation Guide
Version: V1.1
Warning: No operating with power on
Date: Nov. 2011
3.Lock Connection
1. Equiment Installation
(1) Shares power with the lock:
+
In st ru ct io n fo r th e Mo un ti ng P ap er
BELLBELL+
SEN
GND
DC12V
Be fo re t he d ev ic e is f as te ne d, p le as e st ic k th e pa pe r to t he p la ce w he re y ou
wa nt t o in st al l it , th en m ak e ho le s an d
la y ca bl es a cc or di ng t o th e mo un ti ng pa pe r.
Wiring Hole
NC LOCK
-
12
FR 107
(2) Remove the screw on the bottom
(1) Post the mounting template on the
wall.Drill the holes according to
the marks on the template (holes
for screw and wiring).
(3) Take away the back plate.
+
of device.
NO LOCK
BUT
ULOCK=12V, I-ILOCK>1A…… ①
And the lock is near to the device.
NO
COM
NC
AL+
AL-
+
(2) Does not share power with the lock:
-
GND
+
BELLBELL+
SEN
GND
DC12V
DC power
-
BUT
+
FR 107
(4) Fix the back plate on the wall
according to the mounting paper.
(5) Fix the device to the back plate.
+
-
Device does not shares power with the lock:
DC12V
FR 107
+
NO LOCK
BELLBELL+
SEN
GND
BUT
DC power
B . ULOCK ≠12V;
C. The lock is far apart from the device.
NO
COM
NC
AL+
AL-
+
A. ULOCK =12V I-ILOCK ≤ 1A;
with ‘NO’ terminal, and the NC LOCK is connected with ‘NC’ terminal.
Access Control System Function
(1) If a registered user verified, the device will export the signal
to unlock the door.
TCP/IP
⑦
RS232/RS485 Converter
NC LOCK
NO
COM
NC
AL+
AL-
+12V
GND
(1) The system supporst NO LOCK and NC LOCK. For example the NO LOCK (normally open at power on) is connected
2. Structure and Function
Exit Button
⑤
(2) Door sensor will detect the on-off state. If the door is un-
(2) When the Electrical Lock is connected to the Access Cont rol System, you need to parallel one FR107 diode (equipped
in the package) to prevent the self-inductance EMF affecting the system, do not reverse the polarities.
4. Connected with other parts:
expected opened or improperly closed, the alarm signal
④
(digital value) will be triggered.
Door Bell
Lock Sensor
(3) As the d evice is removed illegally , it will output an alarm signal.
SEN
(4) External card reader is supported.
Door Bell External Reader
Exit Button
Alarm Power
(5) External exit button is supported, it is convenient to open the
Alarm
door inside.
(6) External door bell is supported.
③
Alarm
(7) Supports RS485 , TCP/IP modes to connect with PC. One PC can
manage multiple devices.
Input DC 12V, 500mA (50mA standby)
BELL+
Positive is connected with ‘+12V’, negative is connected
with ’GND’ (do not reverse the polarities).
GND
BUT
EXIT BUTTON

5. Connected with Power:
BELL-
EXIT BUTTON
⑥
②
FR 107
NO
COM
NC
AL+
AL-
+12V
①
Device shares power with the lock:
BELLBELL+
SEN
GND
DC12V
+
RS485
+12V
GND
-
BUT
10
11
+
+12V
GND
-
MultiBio 700 Mounting Paper
(only for your reference)
NO
COM
NC
AL+
AL-
+
Door Sensor
-
+
-
DC12V
Voltage output ≤ DC 12V for Alarm
①:‘I’: device output current, ‘ ULOCK
ILOCK ’: lock voltage,’ ’: lock current
+12V
GND
!
6. Wiegand Output
Warning: No operating with power on
7. Wiegand Input
The device supports standard Wiegand 26 output,
The device has the function of Wiegand signal input . It s upports to
as a reader device it has a very good compatibility.
connect with an independent card reader. They are installed each
side of the door, to control the lock and access together.
(2) RS485 Mode:
485+
485-
Please use specified RS485 wire, RS485 active converter and
bus-type wiring.
485+ 485-
Terminals:
+12V
485Access Control
12Vout
485+
GND
GND
IWD1
TXD
IWD0
DATA1
DATA1
DATA0
Terminals
PC Serial Ports
485+
RS485+
485-
RS485-
RS485 Bus
485+
485-
485+
485-
RS485
Converter
RLED
RXD
RLED
GND
DATA0
GND
GND
GLED
WD 0
BEEP
GLED
BEEP
(3) TCP/IP Mode:
WD 1
(1) Please keep the distance between the device and Access Control or Card Reader less than 90 meters(Please use
Wiegand signal extender in long distance or interference environment).
(2) To keep the stability of Wiegand signal, connect the device and the Access Control or Card Reader in same ‘GND’
in any case.
(A) Crossover cable: The device and PC connected
directly.
(B) Straight cable: The device and PC connected to
LAN/WAN through switch/Lanswitch.
PC
8.Other Functions
Switch
IP Address:192.168.1.100
Subnet Mask:255.255.255.0
(1) Manual Reset:
…
If the device does not work properly because of misoperation or
other abnormality, you can use ‘Reset’ function to restart it.
Side View
Back View
IP Address:192.168.1.124
Operation: Remove the black rubber cap, then stick the Reset button
Subnet Mask:255.255.255.0
hole with a sharp tool (the tip diameter less than 2mm).
(2) Recovery Factory Settings:
You can use the tamper switch to recovery factory setting, such
as device number, system password, IP address, RS485 address,
etc. More information please refers to the user manual.
10. Cautions:
Operation: Press the tamper switch three times after the alarm being
triggered 30 seconds but no more than 60 seconds.
Reset Button
Tamper Switch
Note: The user data won’t be cleared.
(1)Power cable is connected after all the other wiring. If the device is working abnormally, please shut down the power
first, then make the necessary check . Kindly reminds you that any hot-line work may damage the device, and
it is not included in the warranty.
(2)We recommend the 3A/12V DC Power supply. Please contact our technical staff for details.
9. Communication
(3 )Please read the terminals description carefully and wiring by rule strictly. Any damage caused by improper
operations will not under warranty.
There are three modes that the PC software communicate
and exchange information with the device: RS232, RS485
and TCP/IP, and the last two mode support remote control.
(1) RS232 Mode:
(4)Keep the exposed part of wire less than 5mm, to avoid unexpected connection.
Terminals:
Terminals
PC Serial Ports
GND
RXD
Pin5-Gnd
Pin3-Txd
TXD
Pin2-Rxd
(5)Please connect the ‘GND’ before all the other wiring especially under the environment, to prevent the overlarge
instantaneous electrostatic to damage device.
(6)Do not change the cable type because of long distance between the power and the device.
(7) Please use specified RS485 wire, RS485 active converter and bus-type wiring.
2. Main Menu
2. Main Menu
There are two types of rights respectively granted to two types of users: the
Ordinary users and administrators. Ordinary users are only granted the
rights of face, fingerprint, password or card verification, while administrators
are granted access to the main menu for various operations apart from
having all the privileges granted to ordinary users.
Press [Menu] on the initial interface to access the main menu, as shown in
the following figure:
The main menu includes nine sub menus:
Add User: Through this submenu, you can add a new user and input the
information on the device, including the user ID, name, fingerprint, face,
card, password, rights, group No.  and user access.
User Mgt.: Through this submenu, you can browse the user information
stored on the device, including the user ID, name, fingerprint, face, card,
password, rights, group No. and user access. Here you can also add,
21
3 inches Facial & Fingerprint Recognition Series Product User Manual
modify or delete a user’s information.
Comm.: Through this submenu, you can set related parameters for
communication between the device and PC, including the IP address,
gateway, subnet mask, baud rate, device No. and communication
password.
System: Through this submenu, you can set system-related parameters,
including the basic parameters, interface parameters, fingerprint, face and
attendance parameters, Keyboard definitions, Access settings, firmware
update etc. to enable the device to meet the user’s requirements to the
greatest extent in terms of functionality and display.
Data Mgt.: Through this submenu, you can perform management of data
stored on the device, for example, deleting the attendance records, all data,
clear administrator, restore to factory settings and query records.
Date/Time: Through this submenu, you can set the alarm time and duration,
or set the Bell.
Auto Test: This submenu enables the system to automatically test whether
functions of various modules are normal, including the screen, sensor, voice,
face, keyboard, clock tests and screen calibration.
Dn/Upload: Through this submenu, you can download user information and
attendance data stored in the device through a USB disk to related software
or other fingerprint recognition equipment.
Sys Info.: Through this submenu, you can browse the records and device
22
2. Main Menu
information.
Any user can access the main menu by pressing the [Menu] key if
the system does not have an administrator. After administrators are
configured on the device, the device needs to verify the administrators’
identity before granting them access to the main menu. To ensure device
security, it is recommended to set an administrator when using the
terminal initially. For detailed operations, see 3.8 Modifying User Right.
23
3 inches Facial & Fingerprint Recognition Series Product User Manual
3. Add User
Press [Add] on the [User Mgt.] interface to display the
[Add User] interface as shown below.
User ID: Enter a user ID. 1 to 9 digits user IDs are
supported by default.
Name: Enter a user name. 12 characters user names
are supported by default.
Fingerprint: Enroll a user’s fingerprint and the device
displays the number of enrolled fingerprints. A user can
enroll 10 fingerprints at maximum.
Password: Enroll a user’s password. The device supports
1-8 digit passwords by default.
Face: Enroll a user’s face.
Group No.: Setting in the group of user.
Role: Set the rights of a user. A user is set to ordinary
user by default and can also be set to administrator.
Ordinary users are only granted the rights of face,
fingerprint or password verification, while administrators
are granted access to the main menu for various
operations apart from having all the privileges granted to
ordinary users.
Photo: Enroll a user’s photo. During user verification is success; the user’s
photo is displayed on screen.
User Access: Set the lock control and access control parameters.
24
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
3.1 Entering a User ID
The device automatically allocates an ID starting from
1 for every user in sequence. If you use the ID
allocated by the device, you may skip this section.
1. Press [User ID] on the [Add User] interface to
display the user ID management interface.

Tip: The user ID can be modified during initial
enrollment, but once enrolled, it cannot be
modified.
2. On the displayed keyboard interface, enter a user ID
and press [OK]. If the message “The user ID already
exists!” is displayed, enter another ID.

Tip: The device supports 1 to 9 digits user IDs
by default. If you need to extend the length of
current user ID numbers, please consult our
commercial representatives or technical pre-sales.
3. After the user ID is entered, press [Save] to save the
current information and return to the previous interface.
Press [Exit] to return to the previous interface without
saving the current information.
25
3 inches Facial & Fingerprint Recognition Series Product User Manual
3.2 Entering a Name
Use T9 input method to enter the user name through
the keyboard.
1. Press [Name] on the [Add User] interface to
display the name input interface.
2. On the displayed keyboard interface, enter a user
name and press [X].
For details of operations on the keyboard interface,
see 12.1 T9 Input Instructions.
3. After the user name is entered, press [Save] to
save the current information and return to the
previous interface. Press [Exit] to return to the previous interface without
saving the current information.
 Tip: The device supports the 1 to 12 characters names by default.
26
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
3.3 Enrolling a Fingerprint
1. Press [Fingerprint] on the [Add User] interface to
display the [Enroll Fingerprint] interface.
2. On the displayed [Enroll Fingerprint] interface,
place your finger on the fingerprint sensor properly
according to the system prompt. For details, see 1.3
Finger Placement.
3. Place the same finger on the fingerprint sensor for
three consecutive times correctly. If the enrollment
succeeds, the system will display a prompt message
and automatically return to the [Add User] interface. If
the enrollment fails, the system will display a prompt message and return to
the [Enroll Fingerprint] interface. In this case, you need to repeat the
operations of step 2.
4. You can enroll the backup fingerprint by pressing [Fingerprint] again. A
user can enroll 10 fingerprints at maximum.
5. Press [Save] to save the current information and return to the previous
interface. Press [Exit] to return to the previous interface without saving the
current information.
27
3 inches Facial & Fingerprint Recognition Series Product User Manual
28
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
3.4 Enrolling a Password
1. Press [Password] on the [Add User] interface to
display the password management interface.
2. On the displayed keyboard interface, enter a
password and press [OK]. Re-enter the password
according to the system prompt and then press [OK].

Tip: The device supports 1-8 digit passwords
by default.
3. After the password is entered, an interface is
displayed as shown below. Press [Save] to save the
current information and return to the previous interface. Press [Exit] to return
to the previous interface without saving the current information.
29
3 inches Facial & Fingerprint Recognition Series Product User Manual
3.5 Enrolling an ID card
1. Press [Card] on the [Add User] interface to display
the [Enroll Card] interface.
2. The [Punch Card!] interface pops up as shown below.
Swipe your ID card properly in the swiping area. For
details, see 1.6 Appearance of Device.
3. If the card passes the verification, the device will
display a prompt message “Read Successfully! Card No.:
**********”, and returns to the [Add User] interface.
4. Press [Save] to save the current information and
return to the previous interface. Press [Exit] to return
to the previous interface without saving the current information.

Note: 3 inches Facial & Fingerprint Recognition support Mifare card
function. It is an option function, if you want to customize the Mifare card
function, please consult our commercial representatives or pre-sales
technical support engineers.
30
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
3.6 Enrolling a Face
1. Press [Face] on the [Add User] interface to display
the face enrollment interface.
2. On the displayed face enrollment interface, turn
your head to the left and right slightly, raise and lower
your head according to the voice prompts, so as to
enroll different parts of your face into the system to
assure the accurate verification. See 1.2 Enrollment
Face Expressions.
3. If your face image is enrolled successfully, the
system
will
display
a
prompt
message
and
automatically return to the [Add User] interface.
4. Press [Save] to save the current information and return to the previous
interface. Press [Exit] to return to the previous interface without saving the
current information.
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement