Allen-Bradley DeviceNet Safety 1732DS-IB8, 1732DS-IB8XOBV4, 1791DS-IB12, 1791DS-IB8XOB8, 1791DS-IB4XOW4, 1791DS-IB8XOBV4, 1791DS-IB16 Guard I/O User Manual

Below you will find brief information for Guard I/O DeviceNet Safety 1732DS-IB8, Guard I/O DeviceNet Safety 1732DS-IB8XOBV4, Guard I/O DeviceNet Safety 1791DS-IB12, Guard I/O DeviceNet Safety 1791DS-IB8XOB8, Guard I/O DeviceNet Safety 1791DS-IB4XOW4, Guard I/O DeviceNet Safety 1791DS-IB8XOBV4. These Guard I/O modules integrate with DeviceNet safety networks and allow for safety control to meet requirements of Safety Integrity Level 3 (SIL 3) and Safety Category 4. These modules can be used to create a safety-control network for applications such as emergency stop push buttons, gate switches, and safety light curtains.

PDF Download
Document
Guard I/O DeviceNet Safety 1732DS-IB8, 1732DS-IB8XOBV4, 1791DS-IB12, 1791DS-IB8XOB8, 1791DS-IB4XOW4, 1791DS-IB8XOBV4 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • CIP-safety protocol conformance
  • Safety inputs
  • Safety outputs
  • I/O status data
  • Security
  • Removable I/O connectors

Frequently asked questions

The Guard I/O modules feature CIP-safety protocol conformance, safety inputs and outputs, I/O status data, security measures, and removable I/O connectors.

The safety state of the module is defined as the off state, meaning the safety outputs are off and safety input data to the network is off.

Dual-channel mode allows for the evaluation of consistency between two input or output signals (channels), enabling the use of the module for Safety Category 4.

The modules offer solid state outputs and relay outputs.

Always ensure the safety status of the module is off (0), do not connect loads beyond the rated value, wire the module properly to prevent accidental contact, and use an appropriate DC supply with double insulation.
Preparing document for printing…
0%