Note manual
TWEAKERS"
NOTE
Bluetooth mini Speaker
FE CE RoHS
Thank you for purchasing TWEAKERS™ NOTE “ bluetooth" speaker ,
its compact design will bring you ultra-portability and amazingly to
deliver powerful bass w/ impressive sound , Enjoy the world of power ,
rhythm and harmony with it ! Also this user manual will assist you to
operate NOTE speaker in a quicker and proper way, kindly read it
through before use .
Overview
Tweakers NOTE speaker employs with Bluetooth technology to
connect Bluetooth devices , such as mobile phones, Music players ,
notebooks 8 PCs etc. , and w/ which to enable you to —
- Wirelessly listen music w/ ultra bass and clear sound .
- handle Phone calls secured and safely on driving
User Interface
TWEAKERS"
NOTE
Answer ( Call handling )
Volume up
Volume down -
MIC -
AUX in
Charging port
Power on / off switch
Power / Charging indicator
Technical Spec
Product Model Tweakers NOTE
Bluetooth Specification Version 3.0 Class II
Frequency Bandwidth 2.4GHz~2.4835GHz, ISM Band
Play time 3 hours
Speaker output 3W+3W
Supported Bluetooth profile] A2DP , HFP
Battery Capacity 1050mAh
Operating Temperature -20~50°C
Storage Temperature -40~70°C
Weight 0.2KG
Size / Dimension 210x30x70mm
Safety Certification CE. FCC
Charging / Pairing / Connectin
Please follow three steps before using NOTE speaker
~ Charge NOTE speaker
a. Plug one end of the USB cord to a 5V USB power adapter or
computer/notebook device and the other end to NOTE speaker
b. While charging, LED is lighted red; when turned blue, the speaker
is fully charged.
Note :
- When the LED flashes with beep, it indicates the battery level is low,
please charge it.
- Charging in a—20 to +50°C.
- Charging time: around 3.5hours.
~ Turn NOTE speaker on / off
A slide switch is used to power on / off NOTE speaker .
~ Pair / connect NOTE speaker to Bluetooth device
a. Power on NOTE speaker , NOTE would automatically reconnect to
last' paired ' Bluetooth device
b. 1st time to use NOTE OR the last paired Bluetooth device is not
existed OR not within effective range ( 10 meter )
- Enable bluetooth function on your phone or the other device
- Search for new Bluetooth device until "TWEAKERS NOTE ' appears
in the ' searched Bluetooth device list ' on your phone / device .
- Select TWEAKERS NOTE".
- Enter passcode 0000 to pair ( if required ) and connect NOTE to
your device .
Note : NOTE's Bluetooth LED is off if no Bluetooth device to connect
after 5 minutes.
Call handling
~ When you receive a call, you hear a ringing tone through the speaker.
~ To answer the call, press the answer key lightly.
~ To reject an incoming call, press and hold the answer key for 2 to 3
seconds until you hear a beep and let go.
~ To end a call, press the answer key lightly, or wait for the other party to
hang up.
Volume Control
+ Short press to add volume, long press to slip into next song
- Short press to decrease volume, long press to slip into previous song
Wire NOTE speaker to Phone / Music player
If there's no Bluetooth function on your phone or music player devices ,
you can wire NOTE speaker ( Line input ) to them w/ the attached Audio
cable.
Package Content
Please ensure the following items are included in the package before
your purchase:
- Tweakers NOTE speaker
- Product User Guide
- USB Cable
- Audio ( Line In ) cable
Care and maintenance
NOTE speaker is a product of superior design and craftsmanship, should
be treated with care , below recommendations will help you protect your
warranty coverage.
@ Keep all accessories out of the reach of children.
@ Keep the device dry. liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet, allow it to dry
completely.
e Do not use or store the device in dusty, dirty areas. Its moving parts
and electronic components can be damaged.
e Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
@ Do not store the device in cold areas. When returns to normal
temperature, moisture can damage electronic circuit boards.
e Do not attempt to open the device.
6 Do not drop, knock, or shake the device. Rough handling may break
circuit boards and the mechanism .
@ Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the device.
@ Do not paint the device. Paint can clog the moving parts and may
cause function ineffective .
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement