Aurora Multimedia ASP-HTD User manual
Advertisement
Advertisement
ASP-HTD
HDMI to DVI & Audio
Converter
User Manual
Manual Number: 100901
Safety and Notice
The ASP-HTD HDMI to DVI & Audio Converter has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ASP-HTD should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit. z Do not attempt to service this unit yourself, except where explained in this manual. z Provide proper ventilation and air circulation and do not use near water. z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. z Use only the power adapter and power cords and connection cables designed for this unit. z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Warning!
This device is served purely for conversion between video formats.
This device CANNOT convert the input/output video resolutions.
1
Introduction
This handy device provides an easy and instant approach for converting digital HDMI to digital video (DVI-D) and both digital audio (S/PDIF) and analog stereo audio. With this module, HDMI based devices such as Blu-ray Disc players, PS3, DVD players, camcorders, or set-top boxes can readily connect to your PC LCD monitor and PC speakers at lowest cost. This device also enables users to connect full digital video and audio to DVI enabled monitor and S/PDIF equipped audio receiver and amplifier, and make the highest compatibility to your home theater devices.
HDMI cable
DVI cable
ASP-HTD
3.5mm audio cable
DVI display/projector
HDMI Source
Analog PC Speaker
S/PDIF audio cable
S/PDIF AV Amplifier
Features
z HDMI 1.2a compatible z Fully HDCP compliant z DVI video up to 165MHz z Coaxial S/PDIF audio output z Stereo analog audio output z Front panel LED indicators z Easy installation
2
Specifications & Package Contents
Technical ASP-HTD
Role of usage Digital-to-Digital format converter
HDMI compliance
DVI compliance
Video Bandwidth
HDMI 1.2a
DVI 1.1
Single-link 165MHz [4.95Gbps]
Video support
Audio support
Output TMDS signal
Up to 1080p60, WUXGA [1920x1200@60Hz], UXGA [1600x1200@60Hz]
Stereo audio
1.2 Volts [peak-to-peak]
ESD protection
PCB stack-up
Output
HDMI connector
DVI connector
RCA connector
3.5mm connector
Control Switch
Mechanical
Dimensions
[L x W x H]
Model
Package
Carton
Weight
Package
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
Package Contents
[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
[2] Core chipset — ±8kV
4-layer board [impedance control — differential 100 Ω; single 50Ω]
1x DVI
1x RCA digital audio
1x 3.5mm analog audio
Type A [19-pin female]
DVI-I [29-pin female digital only]
Coaxial S/PDIF digital audio [PCM 48kHz]
Analog stereo audio
8-level rotary switch for audio & EDID settings
ASP-HTD
88 x 157 x 26mm [3.5” x 6.2” x 1”]
175 x 265 x 80mm [6.9” x 10.4” x 3.1”]
450 x 370 x 300mm [1’6” x 1’3” x 1’]
650g [1.4 lbs]
Wall-mounting case with screws
Interlocking power jack to prevent power loose
5V 2A DC
4 Watts [max]
0~40 °C [32~104°F]
-20~60 °C [-4~140°F]
20~90% RH [no condensation]
1x ASP-HTD
1x 5V power supply unit
1x User Manual
3
Panel Descriptions
Front Panel
1
1. HDMI IN: connect to an HDMI source device
2 3 4 5
2. STATUS: Status indicator
[Normal operation] − lights up means the HDMI device is connected
[EDID learning mode] − lights off means the start of EDID learning mode; flashes means the learning the EDID from connected display; lights up means the completion of the EDID learning
3. MODE: 8-level rotary switch for audio and EDID settings
0 = Pair 1 of 7.1ch analog audio output 4 = Reserved
1 = Pair 2 of 7.1ch analog audio output 5 = Reserved
2 = Pair 3 of 7.1ch analog audio output 6 = Restore Default EDID
3 = Pair 4 of 7.1ch analog audio output 7 = Learn EDID from connected display
4. POWER: power indicator [light: power on; dim: power off]
5. +5V DC: connect to 5V interlocking power supply unit
Rear Panel
6 7 8
6. S/PDIF: connect to S/PDIF digital stereo audio speaker
7. Stereo: connect to analog stereo audio speaker
8. DVI OUT: connect to digital DVI display
Hardware Installation
4
1. Connect your HDMI source device to the HDMI IN port.
2. Connect your DVI display or projector to the DVI-I OUT port.
3. Connect your S/PDIF AV receiver to the S/PDIF RCA port.
4. Connect your PC speaker to the Stereo 3.5mm earphone jack.
5. Power up the ASP-HTD.
* S/PDIF format is dependent upon the embedded digital audio part in the input HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format. This ASP-HTD only separates the digital audio in HDMI stream, and bypasses this decoded audio to the output.
* The function of the rotary switch is reserved and please keep the rotary switch at 0.
EDID Learning
1. Power up the ASP-HTD. Connect DVI display to the DVI OUT.
2. Turn the rotary switch counterclockwise [4] from 0 to 7.
3. The green LED will flash a few times to indicate the EDID is learned.
4. Turn the rotary switch clockwise [3] from 7 to 0. DO NOT let the rotary switch arrow pass 6, which will erase the just learned EDID and reset to default EDID.
Notice
1. Analog stereo audio output can merely support 2-channel audio. This version does NOT support 8-channel analog audio applications.
2. S/PDIF audio output supports main 2-channel audio output only.
5
Limited 3 Year Warranty
Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), warranty. During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with same or similar model) at our option without charge for parts or labor for the specified product warranty period.
This warranty shall not apply if any of the following:
A) The product has been damaged by negligence, accident, lightning, water, act-of-God or mishandling; or,
B) The product has not been operated in accordance with procedures specified in operating instructions: or,
C) The product has been repaired and or altered by other than manufacturer or authorized service center; or,
D) The product's original serial number has been modified or removed: or,
E) External equipment other than supplied by manufacturer, in determination of manufacturer, shall have affected the performance, safety or reliability of the product.
F) Part(s) are no longer available for product.
In the event that the product needs repair or replacement during the specified warranty period, product should be shipped back to Manufacturer at Purchaser's expense. Repaired or replaced product shall be returned to Purchaser by standard shipping methods at Manufacturer's discretion. Express shipping will be at the expense of the Purchaser. If Purchaser resides outside the contiguous US, return shipping shall be at Purchaser's expense.
No other warranty, express or implied other than Manufacturer's shall apply.
Manufacturer does not assume any responsibility for consequential damages, expenses or loss of revenue or property, inconvenience or interruption in operation experienced by the customer due to a malfunction of the purchased equipment. No warranty service performed on any product shall extend the applicable warranty period.
This warranty does not cover damage to the equipment during shipping and Manufacturer assumes no responsibility for such damage.
This product warranty extends to the original purchaser only and will be null and void upon any assignment or transfer.
Aurora Multimedia Corp.
205 Commercial Court, Morganville, NJ 07751
Phone: (732) 591-5800 Fax: (732) 591-5801 www.auroramultimedia.com
6

Public link updated
The public link to your chat has been updated.
Advertisement